| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 | 
 | /******************************************************************************* | 
 |  * | 
 |  * Module Name: utresrc - Resource management utilities | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | #include <acpi/acpi.h> | 
 | #include "accommon.h" | 
 | #include "acresrc.h" | 
 |  | 
 | #define _COMPONENT          ACPI_UTILITIES | 
 | ACPI_MODULE_NAME("utresrc") | 
 |  | 
 | /* | 
 |  * Base sizes of the raw AML resource descriptors, indexed by resource type. | 
 |  * Zero indicates a reserved (and therefore invalid) resource type. | 
 |  */ | 
 | const u8 acpi_gbl_resource_aml_sizes[] = { | 
 | 	/* Small descriptors */ | 
 |  | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_irq), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_dma), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_start_dependent), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_io), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_dma), | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_vendor_small), | 
 | 	ACPI_AML_SIZE_SMALL(struct aml_resource_end_tag), | 
 |  | 
 | 	/* Large descriptors */ | 
 |  | 
 | 	0, | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_memory24), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_generic_register), | 
 | 	0, | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_vendor_large), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_memory32), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_fixed_memory32), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_address32), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_address16), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_address64), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_pin_function), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_pin_config), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group_function), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group_config), | 
 | }; | 
 |  | 
 | const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { | 
 | 	0, | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_i2c_serialbus), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_spi_serialbus), | 
 | 	ACPI_AML_SIZE_LARGE(struct aml_resource_uart_serialbus), | 
 | }; | 
 |  | 
 | /* | 
 |  * Resource types, used to validate the resource length field. | 
 |  * The length of fixed-length types must match exactly, variable | 
 |  * lengths must meet the minimum required length, etc. | 
 |  * Zero indicates a reserved (and therefore invalid) resource type. | 
 |  */ | 
 | static const u8 acpi_gbl_resource_types[] = { | 
 | 	/* Small descriptors */ | 
 |  | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	ACPI_SMALL_VARIABLE_LENGTH,	/* 04 IRQ */ | 
 | 	ACPI_FIXED_LENGTH,	/* 05 DMA */ | 
 | 	ACPI_SMALL_VARIABLE_LENGTH,	/* 06 start_dependent_functions */ | 
 | 	ACPI_FIXED_LENGTH,	/* 07 end_dependent_functions */ | 
 | 	ACPI_FIXED_LENGTH,	/* 08 IO */ | 
 | 	ACPI_FIXED_LENGTH,	/* 09 fixed_IO */ | 
 | 	ACPI_FIXED_LENGTH,	/* 0A fixed_DMA */ | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0E vendor_short */ | 
 | 	ACPI_FIXED_LENGTH,	/* 0F end_tag */ | 
 |  | 
 | 	/* Large descriptors */ | 
 |  | 
 | 	0, | 
 | 	ACPI_FIXED_LENGTH,	/* 01 Memory24 */ | 
 | 	ACPI_FIXED_LENGTH,	/* 02 generic_register */ | 
 | 	0, | 
 | 	ACPI_VARIABLE_LENGTH,	/* 04 vendor_long */ | 
 | 	ACPI_FIXED_LENGTH,	/* 05 Memory32 */ | 
 | 	ACPI_FIXED_LENGTH,	/* 06 memory32_fixed */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 07 Dword* address */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 08 Word* address */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 09 extended_IRQ */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0A Qword* address */ | 
 | 	ACPI_FIXED_LENGTH,	/* 0B Extended* address */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0C Gpio* */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0D pin_function */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0E *serial_bus */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 0F pin_config */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 10 pin_group */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 11 pin_group_function */ | 
 | 	ACPI_VARIABLE_LENGTH,	/* 12 pin_group_config */ | 
 | }; | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_walk_aml_resources | 
 |  * | 
 |  * PARAMETERS:  walk_state          - Current walk info | 
 |  * PARAMETERS:  aml                 - Pointer to the raw AML resource template | 
 |  *              aml_length          - Length of the entire template | 
 |  *              user_function       - Called once for each descriptor found. If | 
 |  *                                    NULL, a pointer to the end_tag is returned | 
 |  *              context             - Passed to user_function | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Walk a raw AML resource list(buffer). User function called | 
 |  *              once for each resource found. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, | 
 | 			   u8 *aml, | 
 | 			   acpi_size aml_length, | 
 | 			   acpi_walk_aml_callback user_function, void **context) | 
 | { | 
 | 	acpi_status status; | 
 | 	u8 *end_aml; | 
 | 	u8 resource_index; | 
 | 	u32 length; | 
 | 	u32 offset = 0; | 
 | 	u8 end_tag[2] = { 0x79, 0x00 }; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ut_walk_aml_resources); | 
 |  | 
 | 	/* The absolute minimum resource template is one end_tag descriptor */ | 
 |  | 
 | 	if (aml_length < sizeof(struct aml_resource_end_tag)) { | 
 | 		return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); | 
 | 	} | 
 |  | 
 | 	/* Point to the end of the resource template buffer */ | 
 |  | 
 | 	end_aml = aml + aml_length; | 
 |  | 
 | 	/* Walk the byte list, abort on any invalid descriptor type or length */ | 
 |  | 
 | 	while (aml < end_aml) { | 
 |  | 
 | 		/* Validate the Resource Type and Resource Length */ | 
 |  | 
 | 		status = | 
 | 		    acpi_ut_validate_resource(walk_state, aml, &resource_index); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			/* | 
 | 			 * Exit on failure. Cannot continue because the descriptor | 
 | 			 * length may be bogus also. | 
 | 			 */ | 
 | 			return_ACPI_STATUS(status); | 
 | 		} | 
 |  | 
 | 		/* Get the length of this descriptor */ | 
 |  | 
 | 		length = acpi_ut_get_descriptor_length(aml); | 
 |  | 
 | 		/* Invoke the user function */ | 
 |  | 
 | 		if (user_function) { | 
 | 			status = | 
 | 			    user_function(aml, length, offset, resource_index, | 
 | 					  context); | 
 | 			if (ACPI_FAILURE(status)) { | 
 | 				return_ACPI_STATUS(status); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* An end_tag descriptor terminates this resource template */ | 
 |  | 
 | 		if (acpi_ut_get_resource_type(aml) == | 
 | 		    ACPI_RESOURCE_NAME_END_TAG) { | 
 | 			/* | 
 | 			 * There must be at least one more byte in the buffer for | 
 | 			 * the 2nd byte of the end_tag | 
 | 			 */ | 
 | 			if ((aml + 1) >= end_aml) { | 
 | 				return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * Don't attempt to perform any validation on the 2nd byte. | 
 | 			 * Although all known ASL compilers insert a zero for the 2nd | 
 | 			 * byte, it can also be a checksum (as per the ACPI spec), | 
 | 			 * and this is occasionally seen in the field. July 2017. | 
 | 			 */ | 
 |  | 
 | 			/* Return the pointer to the end_tag if requested */ | 
 |  | 
 | 			if (!user_function) { | 
 | 				*context = aml; | 
 | 			} | 
 |  | 
 | 			/* Normal exit */ | 
 |  | 
 | 			return_ACPI_STATUS(AE_OK); | 
 | 		} | 
 |  | 
 | 		aml += length; | 
 | 		offset += length; | 
 | 	} | 
 |  | 
 | 	/* Did not find an end_tag descriptor */ | 
 |  | 
 | 	if (user_function) { | 
 |  | 
 | 		/* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */ | 
 |  | 
 | 		(void)acpi_ut_validate_resource(walk_state, end_tag, | 
 | 						&resource_index); | 
 | 		status = | 
 | 		    user_function(end_tag, 2, offset, resource_index, context); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			return_ACPI_STATUS(status); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_validate_resource | 
 |  * | 
 |  * PARAMETERS:  walk_state          - Current walk info | 
 |  *              aml                 - Pointer to the raw AML resource descriptor | 
 |  *              return_index        - Where the resource index is returned. NULL | 
 |  *                                    if the index is not required. | 
 |  * | 
 |  * RETURN:      Status, and optionally the Index into the global resource tables | 
 |  * | 
 |  * DESCRIPTION: Validate an AML resource descriptor by checking the Resource | 
 |  *              Type and Resource Length. Returns an index into the global | 
 |  *              resource information/dispatch tables for later use. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ut_validate_resource(struct acpi_walk_state *walk_state, | 
 | 			  void *aml, u8 *return_index) | 
 | { | 
 | 	union aml_resource *aml_resource; | 
 | 	u8 resource_type; | 
 | 	u8 resource_index; | 
 | 	acpi_rs_length resource_length; | 
 | 	acpi_rs_length minimum_resource_length; | 
 |  | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* | 
 | 	 * 1) Validate the resource_type field (Byte 0) | 
 | 	 */ | 
 | 	resource_type = ACPI_GET8(aml); | 
 |  | 
 | 	/* | 
 | 	 * Byte 0 contains the descriptor name (Resource Type) | 
 | 	 * Examine the large/small bit in the resource header | 
 | 	 */ | 
 | 	if (resource_type & ACPI_RESOURCE_NAME_LARGE) { | 
 |  | 
 | 		/* Verify the large resource type (name) against the max */ | 
 |  | 
 | 		if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) { | 
 | 			goto invalid_resource; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Large Resource Type -- bits 6:0 contain the name | 
 | 		 * Translate range 0x80-0x8B to index range 0x10-0x1B | 
 | 		 */ | 
 | 		resource_index = (u8) (resource_type - 0x70); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Small Resource Type -- bits 6:3 contain the name | 
 | 		 * Shift range to index range 0x00-0x0F | 
 | 		 */ | 
 | 		resource_index = (u8) | 
 | 		    ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check validity of the resource type, via acpi_gbl_resource_types. | 
 | 	 * Zero indicates an invalid resource. | 
 | 	 */ | 
 | 	if (!acpi_gbl_resource_types[resource_index]) { | 
 | 		goto invalid_resource; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Validate the resource_length field. This ensures that the length | 
 | 	 * is at least reasonable, and guarantees that it is non-zero. | 
 | 	 */ | 
 | 	resource_length = acpi_ut_get_resource_length(aml); | 
 | 	minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; | 
 |  | 
 | 	/* Validate based upon the type of resource - fixed length or variable */ | 
 |  | 
 | 	switch (acpi_gbl_resource_types[resource_index]) { | 
 | 	case ACPI_FIXED_LENGTH: | 
 |  | 
 | 		/* Fixed length resource, length must match exactly */ | 
 |  | 
 | 		if (resource_length != minimum_resource_length) { | 
 | 			goto bad_resource_length; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case ACPI_VARIABLE_LENGTH: | 
 |  | 
 | 		/* Variable length resource, length must be at least the minimum */ | 
 |  | 
 | 		if (resource_length < minimum_resource_length) { | 
 | 			goto bad_resource_length; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case ACPI_SMALL_VARIABLE_LENGTH: | 
 |  | 
 | 		/* Small variable length resource, length can be (Min) or (Min-1) */ | 
 |  | 
 | 		if ((resource_length > minimum_resource_length) || | 
 | 		    (resource_length < (minimum_resource_length - 1))) { | 
 | 			goto bad_resource_length; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 |  | 
 | 		/* Shouldn't happen (because of validation earlier), but be sure */ | 
 |  | 
 | 		goto invalid_resource; | 
 | 	} | 
 |  | 
 | 	aml_resource = ACPI_CAST_PTR(union aml_resource, aml); | 
 | 	if (resource_type == ACPI_RESOURCE_NAME_SERIAL_BUS) { | 
 |  | 
 | 		/* Validate the bus_type field */ | 
 |  | 
 | 		if ((aml_resource->common_serial_bus.type == 0) || | 
 | 		    (aml_resource->common_serial_bus.type > | 
 | 		     AML_RESOURCE_MAX_SERIALBUSTYPE)) { | 
 | 			if (walk_state) { | 
 | 				ACPI_ERROR((AE_INFO, | 
 | 					    "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X", | 
 | 					    aml_resource->common_serial_bus. | 
 | 					    type)); | 
 | 			} | 
 | 			return (AE_AML_INVALID_RESOURCE_TYPE); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Optionally return the resource table index */ | 
 |  | 
 | 	if (return_index) { | 
 | 		*return_index = resource_index; | 
 | 	} | 
 |  | 
 | 	return (AE_OK); | 
 |  | 
 | invalid_resource: | 
 |  | 
 | 	if (walk_state) { | 
 | 		ACPI_ERROR((AE_INFO, | 
 | 			    "Invalid/unsupported resource descriptor: Type 0x%2.2X", | 
 | 			    resource_type)); | 
 | 	} | 
 | 	return (AE_AML_INVALID_RESOURCE_TYPE); | 
 |  | 
 | bad_resource_length: | 
 |  | 
 | 	if (walk_state) { | 
 | 		ACPI_ERROR((AE_INFO, | 
 | 			    "Invalid resource descriptor length: Type " | 
 | 			    "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X", | 
 | 			    resource_type, resource_length, | 
 | 			    minimum_resource_length)); | 
 | 	} | 
 | 	return (AE_AML_BAD_RESOURCE_LENGTH); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_get_resource_type | 
 |  * | 
 |  * PARAMETERS:  aml             - Pointer to the raw AML resource descriptor | 
 |  * | 
 |  * RETURN:      The Resource Type with no extraneous bits (except the | 
 |  *              Large/Small descriptor bit -- this is left alone) | 
 |  * | 
 |  * DESCRIPTION: Extract the Resource Type/Name from the first byte of | 
 |  *              a resource descriptor. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u8 acpi_ut_get_resource_type(void *aml) | 
 | { | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* | 
 | 	 * Byte 0 contains the descriptor name (Resource Type) | 
 | 	 * Examine the large/small bit in the resource header | 
 | 	 */ | 
 | 	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { | 
 |  | 
 | 		/* Large Resource Type -- bits 6:0 contain the name */ | 
 |  | 
 | 		return (ACPI_GET8(aml)); | 
 | 	} else { | 
 | 		/* Small Resource Type -- bits 6:3 contain the name */ | 
 |  | 
 | 		return ((u8) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_MASK)); | 
 | 	} | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_get_resource_length | 
 |  * | 
 |  * PARAMETERS:  aml             - Pointer to the raw AML resource descriptor | 
 |  * | 
 |  * RETURN:      Byte Length | 
 |  * | 
 |  * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By | 
 |  *              definition, this does not include the size of the descriptor | 
 |  *              header or the length field itself. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u16 acpi_ut_get_resource_length(void *aml) | 
 | { | 
 | 	acpi_rs_length resource_length; | 
 |  | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* | 
 | 	 * Byte 0 contains the descriptor name (Resource Type) | 
 | 	 * Examine the large/small bit in the resource header | 
 | 	 */ | 
 | 	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { | 
 |  | 
 | 		/* Large Resource type -- bytes 1-2 contain the 16-bit length */ | 
 |  | 
 | 		ACPI_MOVE_16_TO_16(&resource_length, ACPI_ADD_PTR(u8, aml, 1)); | 
 |  | 
 | 	} else { | 
 | 		/* Small Resource type -- bits 2:0 of byte 0 contain the length */ | 
 |  | 
 | 		resource_length = (u16) (ACPI_GET8(aml) & | 
 | 					 ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK); | 
 | 	} | 
 |  | 
 | 	return (resource_length); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_get_resource_header_length | 
 |  * | 
 |  * PARAMETERS:  aml             - Pointer to the raw AML resource descriptor | 
 |  * | 
 |  * RETURN:      Length of the AML header (depends on large/small descriptor) | 
 |  * | 
 |  * DESCRIPTION: Get the length of the header for this resource. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u8 acpi_ut_get_resource_header_length(void *aml) | 
 | { | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* Examine the large/small bit in the resource header */ | 
 |  | 
 | 	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { | 
 | 		return (sizeof(struct aml_resource_large_header)); | 
 | 	} else { | 
 | 		return (sizeof(struct aml_resource_small_header)); | 
 | 	} | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_get_descriptor_length | 
 |  * | 
 |  * PARAMETERS:  aml             - Pointer to the raw AML resource descriptor | 
 |  * | 
 |  * RETURN:      Byte length | 
 |  * | 
 |  * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the | 
 |  *              length of the descriptor header and the length field itself. | 
 |  *              Used to walk descriptor lists. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u32 acpi_ut_get_descriptor_length(void *aml) | 
 | { | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* | 
 | 	 * Get the Resource Length (does not include header length) and add | 
 | 	 * the header length (depends on if this is a small or large resource) | 
 | 	 */ | 
 | 	return (acpi_ut_get_resource_length(aml) + | 
 | 		acpi_ut_get_resource_header_length(aml)); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ut_get_resource_end_tag | 
 |  * | 
 |  * PARAMETERS:  obj_desc        - The resource template buffer object | 
 |  *              end_tag         - Where the pointer to the end_tag is returned | 
 |  * | 
 |  * RETURN:      Status, pointer to the end tag | 
 |  * | 
 |  * DESCRIPTION: Find the end_tag resource descriptor in an AML resource template | 
 |  *              Note: allows a buffer length of zero. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ut_get_resource_end_tag); | 
 |  | 
 | 	/* Allow a buffer length of zero */ | 
 |  | 
 | 	if (!obj_desc->buffer.length) { | 
 | 		*end_tag = obj_desc->buffer.pointer; | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 |  | 
 | 	/* Validate the template and get a pointer to the end_tag */ | 
 |  | 
 | 	status = acpi_ut_walk_aml_resources(NULL, obj_desc->buffer.pointer, | 
 | 					    obj_desc->buffer.length, NULL, | 
 | 					    (void **)end_tag); | 
 |  | 
 | 	return_ACPI_STATUS(status); | 
 | } |