| /* | 
 |  * isl6421.h - driver for lnb supply and control ic ISL6421 | 
 |  * | 
 |  * Copyright (C) 2006 Andrew de Quincey | 
 |  * Copyright (C) 2006 Oliver Endriss | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version 2 | 
 |  * of the License, or (at your option) any later version. | 
 |  * | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * To obtain the license, point your browser to | 
 |  * http://www.gnu.org/copyleft/gpl.html | 
 |  * | 
 |  * | 
 |  * the project's page is at https://linuxtv.org | 
 |  */ | 
 | #include <linux/delay.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/init.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/string.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <media/dvb_frontend.h> | 
 | #include "isl6421.h" | 
 |  | 
 | struct isl6421 { | 
 | 	u8			config; | 
 | 	u8			override_or; | 
 | 	u8			override_and; | 
 | 	struct i2c_adapter	*i2c; | 
 | 	u8			i2c_addr; | 
 | 	bool			is_off; | 
 | }; | 
 |  | 
 | static int isl6421_set_voltage(struct dvb_frontend *fe, | 
 | 			       enum fe_sec_voltage voltage) | 
 | { | 
 | 	int ret; | 
 | 	u8 buf; | 
 | 	bool is_off; | 
 | 	struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; | 
 | 	struct i2c_msg msg[2] = { | 
 | 		{ | 
 | 		  .addr = isl6421->i2c_addr, | 
 | 		  .flags = 0, | 
 | 		  .buf = &isl6421->config, | 
 | 		  .len = 1, | 
 | 		}, { | 
 | 		  .addr = isl6421->i2c_addr, | 
 | 		  .flags = I2C_M_RD, | 
 | 		  .buf = &buf, | 
 | 		  .len = 1, | 
 | 		} | 
 |  | 
 | 	}; | 
 |  | 
 | 	isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); | 
 |  | 
 | 	switch(voltage) { | 
 | 	case SEC_VOLTAGE_OFF: | 
 | 		is_off = true; | 
 | 		break; | 
 | 	case SEC_VOLTAGE_13: | 
 | 		is_off = false; | 
 | 		isl6421->config |= ISL6421_EN1; | 
 | 		break; | 
 | 	case SEC_VOLTAGE_18: | 
 | 		is_off = false; | 
 | 		isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If LNBf were not powered on, disable dynamic current limit, as, | 
 | 	 * according with datasheet, highly capacitive load on the output may | 
 | 	 * cause a difficult start-up. | 
 | 	 */ | 
 | 	if (isl6421->is_off && !is_off) | 
 | 		isl6421->config |= ISL6421_DCL; | 
 |  | 
 | 	isl6421->config |= isl6421->override_or; | 
 | 	isl6421->config &= isl6421->override_and; | 
 |  | 
 | 	ret = i2c_transfer(isl6421->i2c, msg, 2); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	if (ret != 2) | 
 | 		return -EIO; | 
 |  | 
 | 	/* Store off status now incase future commands fail */ | 
 | 	isl6421->is_off = is_off; | 
 |  | 
 | 	/* On overflow, the device will try again after 900 ms (typically) */ | 
 | 	if (!is_off && (buf & ISL6421_OLF1)) | 
 | 		msleep(1000); | 
 |  | 
 | 	/* Re-enable dynamic current limit */ | 
 | 	if ((isl6421->config & ISL6421_DCL) && | 
 | 	    !(isl6421->override_or & ISL6421_DCL)) { | 
 | 		isl6421->config &= ~ISL6421_DCL; | 
 |  | 
 | 		ret = i2c_transfer(isl6421->i2c, msg, 2); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (ret != 2) | 
 | 			return -EIO; | 
 | 	} | 
 |  | 
 | 	/* Check if overload flag is active. If so, disable power */ | 
 | 	if (!is_off && (buf & ISL6421_OLF1)) { | 
 | 		isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); | 
 | 		ret = i2c_transfer(isl6421->i2c, msg, 1); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (ret != 1) | 
 | 			return -EIO; | 
 | 		isl6421->is_off = true; | 
 |  | 
 | 		dev_warn(&isl6421->i2c->dev, | 
 | 			 "Overload current detected. disabling LNBf power\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) | 
 | { | 
 | 	struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; | 
 | 	struct i2c_msg msg = {	.addr = isl6421->i2c_addr, .flags = 0, | 
 | 				.buf = &isl6421->config, | 
 | 				.len = sizeof(isl6421->config) }; | 
 |  | 
 | 	if (arg) | 
 | 		isl6421->config |= ISL6421_LLC1; | 
 | 	else | 
 | 		isl6421->config &= ~ISL6421_LLC1; | 
 |  | 
 | 	isl6421->config |= isl6421->override_or; | 
 | 	isl6421->config &= isl6421->override_and; | 
 |  | 
 | 	return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; | 
 | } | 
 |  | 
 | static int isl6421_set_tone(struct dvb_frontend *fe, | 
 | 			    enum fe_sec_tone_mode tone) | 
 | { | 
 | 	struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; | 
 | 	struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, | 
 | 			       .buf = &isl6421->config, | 
 | 			       .len = sizeof(isl6421->config) }; | 
 |  | 
 | 	switch (tone) { | 
 | 	case SEC_TONE_ON: | 
 | 		isl6421->config |= ISL6421_ENT1; | 
 | 		break; | 
 | 	case SEC_TONE_OFF: | 
 | 		isl6421->config &= ~ISL6421_ENT1; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	isl6421->config |= isl6421->override_or; | 
 | 	isl6421->config &= isl6421->override_and; | 
 |  | 
 | 	return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; | 
 | } | 
 |  | 
 | static void isl6421_release(struct dvb_frontend *fe) | 
 | { | 
 | 	/* power off */ | 
 | 	isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); | 
 |  | 
 | 	/* free */ | 
 | 	kfree(fe->sec_priv); | 
 | 	fe->sec_priv = NULL; | 
 | } | 
 |  | 
 | struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, | 
 | 		   u8 override_set, u8 override_clear, bool override_tone) | 
 | { | 
 | 	struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); | 
 | 	if (!isl6421) | 
 | 		return NULL; | 
 |  | 
 | 	/* default configuration */ | 
 | 	isl6421->config = ISL6421_ISEL1; | 
 | 	isl6421->i2c = i2c; | 
 | 	isl6421->i2c_addr = i2c_addr; | 
 | 	fe->sec_priv = isl6421; | 
 |  | 
 | 	/* bits which should be forced to '1' */ | 
 | 	isl6421->override_or = override_set; | 
 |  | 
 | 	/* bits which should be forced to '0' */ | 
 | 	isl6421->override_and = ~override_clear; | 
 |  | 
 | 	/* detect if it is present or not */ | 
 | 	if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { | 
 | 		kfree(isl6421); | 
 | 		fe->sec_priv = NULL; | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	isl6421->is_off = true; | 
 |  | 
 | 	/* install release callback */ | 
 | 	fe->ops.release_sec = isl6421_release; | 
 |  | 
 | 	/* override frontend ops */ | 
 | 	fe->ops.set_voltage = isl6421_set_voltage; | 
 | 	fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; | 
 | 	if (override_tone) | 
 | 		fe->ops.set_tone = isl6421_set_tone; | 
 |  | 
 | 	return fe; | 
 | } | 
 | EXPORT_SYMBOL(isl6421_attach); | 
 |  | 
 | MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); | 
 | MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); | 
 | MODULE_LICENSE("GPL"); |