|  | /* | 
|  | 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux. | 
|  |  | 
|  | Written By: Adam Radford <aradford@gmail.com> | 
|  |  | 
|  | Copyright (C) 2009 LSI Corporation. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; version 2 of the License. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | NO WARRANTY | 
|  | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | 
|  | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | 
|  | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | 
|  | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | 
|  | solely responsible for determining the appropriateness of using and | 
|  | distributing the Program and assumes all risks associated with its | 
|  | exercise of rights under this Agreement, including but not limited to | 
|  | the risks and costs of program errors, damage to or loss of data, | 
|  | programs or equipment, and unavailability or interruption of operations. | 
|  |  | 
|  | DISCLAIMER OF LIABILITY | 
|  | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | 
|  | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | 
|  | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
|  | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
|  | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | 
|  | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  |  | 
|  | Controllers supported by this driver: | 
|  |  | 
|  | LSI 3ware 9750 6Gb/s SAS/SATA-RAID | 
|  |  | 
|  | Bugs/Comments/Suggestions should be mailed to: | 
|  | aradford@gmail.com | 
|  |  | 
|  | History | 
|  | ------- | 
|  | 3.26.02.000 - Initial driver release. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_tcq.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include "3w-sas.h" | 
|  |  | 
|  | /* Globals */ | 
|  | #define TW_DRIVER_VERSION "3.26.02.000" | 
|  | static DEFINE_MUTEX(twl_chrdev_mutex); | 
|  | static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT]; | 
|  | static unsigned int twl_device_extension_count; | 
|  | static int twl_major = -1; | 
|  | extern struct timezone sys_tz; | 
|  |  | 
|  | /* Module parameters */ | 
|  | MODULE_AUTHOR ("LSI"); | 
|  | MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(TW_DRIVER_VERSION); | 
|  |  | 
|  | static int use_msi; | 
|  | module_param(use_msi, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0"); | 
|  |  | 
|  | /* Function prototypes */ | 
|  | static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset); | 
|  |  | 
|  | /* Functions */ | 
|  |  | 
|  | /* This function returns AENs through sysfs */ | 
|  | static ssize_t twl_sysfs_aen_read(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *outbuf, loff_t offset, size_t count) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; | 
|  | unsigned long flags = 0; | 
|  | ssize_t ret; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  | ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH); | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } /* End twl_sysfs_aen_read() */ | 
|  |  | 
|  | /* aen_read sysfs attribute initializer */ | 
|  | static struct bin_attribute twl_sysfs_aen_read_attr = { | 
|  | .attr = { | 
|  | .name = "3ware_aen_read", | 
|  | .mode = S_IRUSR, | 
|  | }, | 
|  | .size = 0, | 
|  | .read = twl_sysfs_aen_read | 
|  | }; | 
|  |  | 
|  | /* This function returns driver compatibility info through sysfs */ | 
|  | static ssize_t twl_sysfs_compat_info(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *outbuf, loff_t offset, size_t count) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata; | 
|  | unsigned long flags = 0; | 
|  | ssize_t ret; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  | ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } /* End twl_sysfs_compat_info() */ | 
|  |  | 
|  | /* compat_info sysfs attribute initializer */ | 
|  | static struct bin_attribute twl_sysfs_compat_info_attr = { | 
|  | .attr = { | 
|  | .name = "3ware_compat_info", | 
|  | .mode = S_IRUSR, | 
|  | }, | 
|  | .size = 0, | 
|  | .read = twl_sysfs_compat_info | 
|  | }; | 
|  |  | 
|  | /* Show some statistics about the card */ | 
|  | static ssize_t twl_show_stats(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *host = class_to_shost(dev); | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; | 
|  | unsigned long flags = 0; | 
|  | ssize_t len; | 
|  |  | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  | len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n" | 
|  | "Current commands posted:   %4d\n" | 
|  | "Max commands posted:       %4d\n" | 
|  | "Last sgl length:           %4d\n" | 
|  | "Max sgl length:            %4d\n" | 
|  | "Last sector count:         %4d\n" | 
|  | "Max sector count:          %4d\n" | 
|  | "SCSI Host Resets:          %4d\n" | 
|  | "AEN's:                     %4d\n", | 
|  | TW_DRIVER_VERSION, | 
|  | tw_dev->posted_request_count, | 
|  | tw_dev->max_posted_request_count, | 
|  | tw_dev->sgl_entries, | 
|  | tw_dev->max_sgl_entries, | 
|  | tw_dev->sector_count, | 
|  | tw_dev->max_sector_count, | 
|  | tw_dev->num_resets, | 
|  | tw_dev->aen_count); | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  | return len; | 
|  | } /* End twl_show_stats() */ | 
|  |  | 
|  | /* stats sysfs attribute initializer */ | 
|  | static struct device_attribute twl_host_stats_attr = { | 
|  | .attr = { | 
|  | .name = 	"3ware_stats", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = twl_show_stats | 
|  | }; | 
|  |  | 
|  | /* Host attributes initializer */ | 
|  | static struct device_attribute *twl_host_attrs[] = { | 
|  | &twl_host_stats_attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* This function will look up an AEN severity string */ | 
|  | static char *twl_aen_severity_lookup(unsigned char severity_code) | 
|  | { | 
|  | char *retval = NULL; | 
|  |  | 
|  | if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) || | 
|  | (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG)) | 
|  | goto out; | 
|  |  | 
|  | retval = twl_aen_severity_table[severity_code]; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_aen_severity_lookup() */ | 
|  |  | 
|  | /* This function will queue an event */ | 
|  | static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header) | 
|  | { | 
|  | u32 local_time; | 
|  | TW_Event *event; | 
|  | unsigned short aen; | 
|  | char host[16]; | 
|  | char *error_str; | 
|  |  | 
|  | tw_dev->aen_count++; | 
|  |  | 
|  | /* Fill out event info */ | 
|  | event = tw_dev->event_queue[tw_dev->error_index]; | 
|  |  | 
|  | host[0] = '\0'; | 
|  | if (tw_dev->host) | 
|  | sprintf(host, " scsi%d:", tw_dev->host->host_no); | 
|  |  | 
|  | aen = le16_to_cpu(header->status_block.error); | 
|  | memset(event, 0, sizeof(TW_Event)); | 
|  |  | 
|  | event->severity = TW_SEV_OUT(header->status_block.severity__reserved); | 
|  | /* event->time_stamp_sec overflows in y2106 */ | 
|  | local_time = (u32)(ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60)); | 
|  | event->time_stamp_sec = local_time; | 
|  | event->aen_code = aen; | 
|  | event->retrieved = TW_AEN_NOT_RETRIEVED; | 
|  | event->sequence_id = tw_dev->error_sequence_id; | 
|  | tw_dev->error_sequence_id++; | 
|  |  | 
|  | /* Check for embedded error string */ | 
|  | error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]); | 
|  |  | 
|  | header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0'; | 
|  | event->parameter_len = strlen(header->err_specific_desc); | 
|  | memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str)); | 
|  | if (event->severity != TW_AEN_SEVERITY_DEBUG) | 
|  | printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n", | 
|  | host, | 
|  | twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)), | 
|  | TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str, | 
|  | header->err_specific_desc); | 
|  | else | 
|  | tw_dev->aen_count--; | 
|  |  | 
|  | tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH; | 
|  | } /* End twl_aen_queue_event() */ | 
|  |  | 
|  | /* This function will attempt to post a command packet to the board */ | 
|  | static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id) | 
|  | { | 
|  | dma_addr_t command_que_value; | 
|  |  | 
|  | command_que_value = tw_dev->command_packet_phys[request_id]; | 
|  | command_que_value += TW_COMMAND_OFFSET; | 
|  |  | 
|  | /* First write upper 4 bytes */ | 
|  | writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev)); | 
|  | /* Then the lower 4 bytes */ | 
|  | writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev)); | 
|  |  | 
|  | tw_dev->state[request_id] = TW_S_POSTED; | 
|  | tw_dev->posted_request_count++; | 
|  | if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) | 
|  | tw_dev->max_posted_request_count = tw_dev->posted_request_count; | 
|  |  | 
|  | return 0; | 
|  | } /* End twl_post_command_packet() */ | 
|  |  | 
|  | /* This function hands scsi cdb's to the firmware */ | 
|  | static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg) | 
|  | { | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Command_Apache *command_packet; | 
|  | int i, sg_count; | 
|  | struct scsi_cmnd *srb = NULL; | 
|  | struct scatterlist *sglist = NULL, *sg; | 
|  | int retval = 1; | 
|  |  | 
|  | if (tw_dev->srb[request_id]) { | 
|  | srb = tw_dev->srb[request_id]; | 
|  | if (scsi_sglist(srb)) | 
|  | sglist = scsi_sglist(srb); | 
|  | } | 
|  |  | 
|  | /* Initialize command packet */ | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | full_command_packet->header.header_desc.size_header = 128; | 
|  | full_command_packet->header.status_block.error = 0; | 
|  | full_command_packet->header.status_block.severity__reserved = 0; | 
|  |  | 
|  | command_packet = &full_command_packet->command.newcommand; | 
|  | command_packet->status = 0; | 
|  | command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI); | 
|  |  | 
|  | /* We forced 16 byte cdb use earlier */ | 
|  | if (!cdb) | 
|  | memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN); | 
|  | else | 
|  | memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN); | 
|  |  | 
|  | if (srb) { | 
|  | command_packet->unit = srb->device->id; | 
|  | command_packet->request_id__lunl = | 
|  | cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id)); | 
|  | } else { | 
|  | command_packet->request_id__lunl = | 
|  | cpu_to_le16(TW_REQ_LUN_IN(0, request_id)); | 
|  | command_packet->unit = 0; | 
|  | } | 
|  |  | 
|  | command_packet->sgl_offset = 16; | 
|  |  | 
|  | if (!sglistarg) { | 
|  | /* Map sglist from scsi layer to cmd packet */ | 
|  | if (scsi_sg_count(srb)) { | 
|  | sg_count = scsi_dma_map(srb); | 
|  | if (sg_count <= 0) | 
|  | goto out; | 
|  |  | 
|  | scsi_for_each_sg(srb, sg, sg_count, i) { | 
|  | command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg)); | 
|  | command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg)); | 
|  | } | 
|  | command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id]))); | 
|  | } | 
|  | } else { | 
|  | /* Internal cdb post */ | 
|  | for (i = 0; i < use_sg; i++) { | 
|  | command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address); | 
|  | command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length); | 
|  | } | 
|  | command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg)); | 
|  | } | 
|  |  | 
|  | /* Update some stats */ | 
|  | if (srb) { | 
|  | tw_dev->sector_count = scsi_bufflen(srb) / 512; | 
|  | if (tw_dev->sector_count > tw_dev->max_sector_count) | 
|  | tw_dev->max_sector_count = tw_dev->sector_count; | 
|  | tw_dev->sgl_entries = scsi_sg_count(srb); | 
|  | if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) | 
|  | tw_dev->max_sgl_entries = tw_dev->sgl_entries; | 
|  | } | 
|  |  | 
|  | /* Now post the command to the board */ | 
|  | retval = twl_post_command_packet(tw_dev, request_id); | 
|  |  | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_scsiop_execute_scsi() */ | 
|  |  | 
|  | /* This function will read the aen queue from the isr */ | 
|  | static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) | 
|  | { | 
|  | char cdb[TW_MAX_CDB_LEN]; | 
|  | TW_SG_Entry_ISO sglist[1]; | 
|  | TW_Command_Full *full_command_packet; | 
|  | int retval = 1; | 
|  |  | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | memset(full_command_packet, 0, sizeof(TW_Command_Full)); | 
|  |  | 
|  | /* Initialize cdb */ | 
|  | memset(&cdb, 0, TW_MAX_CDB_LEN); | 
|  | cdb[0] = REQUEST_SENSE; /* opcode */ | 
|  | cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ | 
|  |  | 
|  | /* Initialize sglist */ | 
|  | memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); | 
|  | sglist[0].length = TW_SECTOR_SIZE; | 
|  | sglist[0].address = tw_dev->generic_buffer_phys[request_id]; | 
|  |  | 
|  | /* Mark internal command */ | 
|  | tw_dev->srb[request_id] = NULL; | 
|  |  | 
|  | /* Now post the command packet */ | 
|  | if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue"); | 
|  | goto out; | 
|  | } | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_aen_read_queue() */ | 
|  |  | 
|  | /* This function will sync firmware time with the host time */ | 
|  | static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id) | 
|  | { | 
|  | u32 schedulertime; | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Command *command_packet; | 
|  | TW_Param_Apache *param; | 
|  | time64_t local_time; | 
|  |  | 
|  | /* Fill out the command packet */ | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | memset(full_command_packet, 0, sizeof(TW_Command_Full)); | 
|  | command_packet = &full_command_packet->command.oldcommand; | 
|  | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); | 
|  | command_packet->request_id = request_id; | 
|  | command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); | 
|  | command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); | 
|  | command_packet->size = TW_COMMAND_SIZE; | 
|  | command_packet->byte6_offset.parameter_count = cpu_to_le16(1); | 
|  |  | 
|  | /* Setup the param */ | 
|  | param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; | 
|  | memset(param, 0, TW_SECTOR_SIZE); | 
|  | param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */ | 
|  | param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */ | 
|  | param->parameter_size_bytes = cpu_to_le16(4); | 
|  |  | 
|  | /* Convert system time in UTC to local time seconds since last | 
|  | Sunday 12:00AM */ | 
|  | local_time = (ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60)); | 
|  | div_u64_rem(local_time - (3 * 86400), 604800, &schedulertime); | 
|  | schedulertime = cpu_to_le32(schedulertime); | 
|  |  | 
|  | memcpy(param->data, &schedulertime, sizeof(u32)); | 
|  |  | 
|  | /* Mark internal command */ | 
|  | tw_dev->srb[request_id] = NULL; | 
|  |  | 
|  | /* Now post the command */ | 
|  | twl_post_command_packet(tw_dev, request_id); | 
|  | } /* End twl_aen_sync_time() */ | 
|  |  | 
|  | /* This function will assign an available request id */ | 
|  | static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id) | 
|  | { | 
|  | *request_id = tw_dev->free_queue[tw_dev->free_head]; | 
|  | tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; | 
|  | tw_dev->state[*request_id] = TW_S_STARTED; | 
|  | } /* End twl_get_request_id() */ | 
|  |  | 
|  | /* This function will free a request id */ | 
|  | static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id) | 
|  | { | 
|  | tw_dev->free_queue[tw_dev->free_tail] = request_id; | 
|  | tw_dev->state[request_id] = TW_S_FINISHED; | 
|  | tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; | 
|  | } /* End twl_free_request_id() */ | 
|  |  | 
|  | /* This function will complete an aen request from the isr */ | 
|  | static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id) | 
|  | { | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Command *command_packet; | 
|  | TW_Command_Apache_Header *header; | 
|  | unsigned short aen; | 
|  | int retval = 1; | 
|  |  | 
|  | header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; | 
|  | tw_dev->posted_request_count--; | 
|  | aen = le16_to_cpu(header->status_block.error); | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | command_packet = &full_command_packet->command.oldcommand; | 
|  |  | 
|  | /* First check for internal completion of set param for time sync */ | 
|  | if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) { | 
|  | /* Keep reading the queue in case there are more aen's */ | 
|  | if (twl_aen_read_queue(tw_dev, request_id)) | 
|  | goto out2; | 
|  | else { | 
|  | retval = 0; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (aen) { | 
|  | case TW_AEN_QUEUE_EMPTY: | 
|  | /* Quit reading the queue if this is the last one */ | 
|  | break; | 
|  | case TW_AEN_SYNC_TIME_WITH_HOST: | 
|  | twl_aen_sync_time(tw_dev, request_id); | 
|  | retval = 0; | 
|  | goto out; | 
|  | default: | 
|  | twl_aen_queue_event(tw_dev, header); | 
|  |  | 
|  | /* If there are more aen's, keep reading the queue */ | 
|  | if (twl_aen_read_queue(tw_dev, request_id)) | 
|  | goto out2; | 
|  | else { | 
|  | retval = 0; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | retval = 0; | 
|  | out2: | 
|  | tw_dev->state[request_id] = TW_S_COMPLETED; | 
|  | twl_free_request_id(tw_dev, request_id); | 
|  | clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_aen_complete() */ | 
|  |  | 
|  | /* This function will poll for a response */ | 
|  | static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds) | 
|  | { | 
|  | unsigned long before; | 
|  | dma_addr_t mfa; | 
|  | u32 regh, regl; | 
|  | u32 response; | 
|  | int retval = 1; | 
|  | int found = 0; | 
|  |  | 
|  | before = jiffies; | 
|  |  | 
|  | while (!found) { | 
|  | if (sizeof(dma_addr_t) > 4) { | 
|  | regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); | 
|  | regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  | mfa = ((u64)regh << 32) | regl; | 
|  | } else | 
|  | mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  |  | 
|  | response = (u32)mfa; | 
|  |  | 
|  | if (TW_RESID_OUT(response) == request_id) | 
|  | found = 1; | 
|  |  | 
|  | if (time_after(jiffies, before + HZ * seconds)) | 
|  | goto out; | 
|  |  | 
|  | msleep(50); | 
|  | } | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_poll_response() */ | 
|  |  | 
|  | /* This function will drain the aen queue */ | 
|  | static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset) | 
|  | { | 
|  | int request_id = 0; | 
|  | char cdb[TW_MAX_CDB_LEN]; | 
|  | TW_SG_Entry_ISO sglist[1]; | 
|  | int finished = 0, count = 0; | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Command_Apache_Header *header; | 
|  | unsigned short aen; | 
|  | int first_reset = 0, queue = 0, retval = 1; | 
|  |  | 
|  | if (no_check_reset) | 
|  | first_reset = 0; | 
|  | else | 
|  | first_reset = 1; | 
|  |  | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | memset(full_command_packet, 0, sizeof(TW_Command_Full)); | 
|  |  | 
|  | /* Initialize cdb */ | 
|  | memset(&cdb, 0, TW_MAX_CDB_LEN); | 
|  | cdb[0] = REQUEST_SENSE; /* opcode */ | 
|  | cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */ | 
|  |  | 
|  | /* Initialize sglist */ | 
|  | memset(&sglist, 0, sizeof(TW_SG_Entry_ISO)); | 
|  | sglist[0].length = TW_SECTOR_SIZE; | 
|  | sglist[0].address = tw_dev->generic_buffer_phys[request_id]; | 
|  |  | 
|  | /* Mark internal command */ | 
|  | tw_dev->srb[request_id] = NULL; | 
|  |  | 
|  | do { | 
|  | /* Send command to the board */ | 
|  | if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Now poll for completion */ | 
|  | if (twl_poll_response(tw_dev, request_id, 30)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue"); | 
|  | tw_dev->posted_request_count--; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | tw_dev->posted_request_count--; | 
|  | header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id]; | 
|  | aen = le16_to_cpu(header->status_block.error); | 
|  | queue = 0; | 
|  | count++; | 
|  |  | 
|  | switch (aen) { | 
|  | case TW_AEN_QUEUE_EMPTY: | 
|  | if (first_reset != 1) | 
|  | goto out; | 
|  | else | 
|  | finished = 1; | 
|  | break; | 
|  | case TW_AEN_SOFT_RESET: | 
|  | if (first_reset == 0) | 
|  | first_reset = 1; | 
|  | else | 
|  | queue = 1; | 
|  | break; | 
|  | case TW_AEN_SYNC_TIME_WITH_HOST: | 
|  | break; | 
|  | default: | 
|  | queue = 1; | 
|  | } | 
|  |  | 
|  | /* Now queue an event info */ | 
|  | if (queue) | 
|  | twl_aen_queue_event(tw_dev, header); | 
|  | } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN)); | 
|  |  | 
|  | if (count == TW_MAX_AEN_DRAIN) | 
|  | goto out; | 
|  |  | 
|  | retval = 0; | 
|  | out: | 
|  | tw_dev->state[request_id] = TW_S_INITIAL; | 
|  | return retval; | 
|  | } /* End twl_aen_drain_queue() */ | 
|  |  | 
|  | /* This function will allocate memory and check if it is correctly aligned */ | 
|  | static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) | 
|  | { | 
|  | int i; | 
|  | dma_addr_t dma_handle; | 
|  | unsigned long *cpu_addr; | 
|  | int retval = 1; | 
|  |  | 
|  | cpu_addr = pci_zalloc_consistent(tw_dev->tw_pci_dev, size * TW_Q_LENGTH, | 
|  | &dma_handle); | 
|  | if (!cpu_addr) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < TW_Q_LENGTH; i++) { | 
|  | switch(which) { | 
|  | case 0: | 
|  | tw_dev->command_packet_phys[i] = dma_handle+(i*size); | 
|  | tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size)); | 
|  | break; | 
|  | case 1: | 
|  | tw_dev->generic_buffer_phys[i] = dma_handle+(i*size); | 
|  | tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); | 
|  | break; | 
|  | case 2: | 
|  | tw_dev->sense_buffer_phys[i] = dma_handle+(i*size); | 
|  | tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size)); | 
|  | break; | 
|  | } | 
|  | } | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_allocate_memory() */ | 
|  |  | 
|  | /* This function will load the request id and various sgls for ioctls */ | 
|  | static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length) | 
|  | { | 
|  | TW_Command *oldcommand; | 
|  | TW_Command_Apache *newcommand; | 
|  | TW_SG_Entry_ISO *sgl; | 
|  | unsigned int pae = 0; | 
|  |  | 
|  | if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4)) | 
|  | pae = 1; | 
|  |  | 
|  | if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) { | 
|  | newcommand = &full_command_packet->command.newcommand; | 
|  | newcommand->request_id__lunl = | 
|  | cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); | 
|  | if (length) { | 
|  | newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); | 
|  | newcommand->sg_list[0].length = TW_CPU_TO_SGL(length); | 
|  | } | 
|  | newcommand->sgl_entries__lunh = | 
|  | cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); | 
|  | } else { | 
|  | oldcommand = &full_command_packet->command.oldcommand; | 
|  | oldcommand->request_id = request_id; | 
|  |  | 
|  | if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) { | 
|  | /* Load the sg list */ | 
|  | sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0)); | 
|  | sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); | 
|  | sgl->length = TW_CPU_TO_SGL(length); | 
|  | oldcommand->size += pae; | 
|  | oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0; | 
|  | } | 
|  | } | 
|  | } /* End twl_load_sgl() */ | 
|  |  | 
|  | /* This function handles ioctl for the character device | 
|  | This interface is used by smartmontools open source software */ | 
|  | static long twl_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | long timeout; | 
|  | unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0; | 
|  | dma_addr_t dma_handle; | 
|  | int request_id = 0; | 
|  | TW_Ioctl_Driver_Command driver_command; | 
|  | struct inode *inode = file_inode(file); | 
|  | TW_Ioctl_Buf_Apache *tw_ioctl; | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)]; | 
|  | int retval = -EFAULT; | 
|  | void __user *argp = (void __user *)arg; | 
|  |  | 
|  | mutex_lock(&twl_chrdev_mutex); | 
|  |  | 
|  | /* Only let one of these through at a time */ | 
|  | if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { | 
|  | retval = -EINTR; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* First copy down the driver command */ | 
|  | if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command))) | 
|  | goto out2; | 
|  |  | 
|  | /* Check data buffer size */ | 
|  | if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) { | 
|  | retval = -EINVAL; | 
|  | goto out2; | 
|  | } | 
|  |  | 
|  | /* Hardware can only do multiple of 512 byte transfers */ | 
|  | data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511; | 
|  |  | 
|  | /* Now allocate ioctl buf memory */ | 
|  | cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL); | 
|  | if (!cpu_addr) { | 
|  | retval = -ENOMEM; | 
|  | goto out2; | 
|  | } | 
|  |  | 
|  | tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr; | 
|  |  | 
|  | /* Now copy down the entire ioctl */ | 
|  | if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1)) | 
|  | goto out3; | 
|  |  | 
|  | /* See which ioctl we are doing */ | 
|  | switch (cmd) { | 
|  | case TW_IOCTL_FIRMWARE_PASS_THROUGH: | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  | twl_get_request_id(tw_dev, &request_id); | 
|  |  | 
|  | /* Flag internal command */ | 
|  | tw_dev->srb[request_id] = NULL; | 
|  |  | 
|  | /* Flag chrdev ioctl */ | 
|  | tw_dev->chrdev_request_id = request_id; | 
|  |  | 
|  | full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command; | 
|  |  | 
|  | /* Load request id and sglist for both command types */ | 
|  | twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted); | 
|  |  | 
|  | memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full)); | 
|  |  | 
|  | /* Now post the command packet to the controller */ | 
|  | twl_post_command_packet(tw_dev, request_id); | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  |  | 
|  | timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; | 
|  |  | 
|  | /* Now wait for command to complete */ | 
|  | timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); | 
|  |  | 
|  | /* We timed out, and didn't get an interrupt */ | 
|  | if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { | 
|  | /* Now we need to reset the board */ | 
|  | printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n", | 
|  | tw_dev->host->host_no, TW_DRIVER, 0x6, | 
|  | cmd); | 
|  | retval = -EIO; | 
|  | twl_reset_device_extension(tw_dev, 1); | 
|  | goto out3; | 
|  | } | 
|  |  | 
|  | /* Now copy in the command packet response */ | 
|  | memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full)); | 
|  |  | 
|  | /* Now complete the io */ | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  | tw_dev->posted_request_count--; | 
|  | tw_dev->state[request_id] = TW_S_COMPLETED; | 
|  | twl_free_request_id(tw_dev, request_id); | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  | break; | 
|  | default: | 
|  | retval = -ENOTTY; | 
|  | goto out3; | 
|  | } | 
|  |  | 
|  | /* Now copy the entire response to userspace */ | 
|  | if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0) | 
|  | retval = 0; | 
|  | out3: | 
|  | /* Now free ioctl buf memory */ | 
|  | dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle); | 
|  | out2: | 
|  | mutex_unlock(&tw_dev->ioctl_lock); | 
|  | out: | 
|  | mutex_unlock(&twl_chrdev_mutex); | 
|  | return retval; | 
|  | } /* End twl_chrdev_ioctl() */ | 
|  |  | 
|  | /* This function handles open for the character device */ | 
|  | static int twl_chrdev_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | unsigned int minor_number; | 
|  | int retval = -ENODEV; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) { | 
|  | retval = -EACCES; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | minor_number = iminor(inode); | 
|  | if (minor_number >= twl_device_extension_count) | 
|  | goto out; | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_chrdev_open() */ | 
|  |  | 
|  | /* File operations struct for character device */ | 
|  | static const struct file_operations twl_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .unlocked_ioctl	= twl_chrdev_ioctl, | 
|  | .open		= twl_chrdev_open, | 
|  | .release	= NULL, | 
|  | .llseek		= noop_llseek, | 
|  | }; | 
|  |  | 
|  | /* This function passes sense data from firmware to scsi layer */ | 
|  | static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host) | 
|  | { | 
|  | TW_Command_Apache_Header *header; | 
|  | TW_Command_Full *full_command_packet; | 
|  | unsigned short error; | 
|  | char *error_str; | 
|  | int retval = 1; | 
|  |  | 
|  | header = tw_dev->sense_buffer_virt[i]; | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  |  | 
|  | /* Get embedded firmware error string */ | 
|  | error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]); | 
|  |  | 
|  | /* Don't print error for Logical unit not supported during rollcall */ | 
|  | error = le16_to_cpu(header->status_block.error); | 
|  | if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) { | 
|  | if (print_host) | 
|  | printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n", | 
|  | tw_dev->host->host_no, | 
|  | TW_MESSAGE_SOURCE_CONTROLLER_ERROR, | 
|  | header->status_block.error, | 
|  | error_str, | 
|  | header->err_specific_desc); | 
|  | else | 
|  | printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n", | 
|  | TW_MESSAGE_SOURCE_CONTROLLER_ERROR, | 
|  | header->status_block.error, | 
|  | error_str, | 
|  | header->err_specific_desc); | 
|  | } | 
|  |  | 
|  | if (copy_sense) { | 
|  | memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH); | 
|  | tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1); | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_fill_sense() */ | 
|  |  | 
|  | /* This function will free up device extension resources */ | 
|  | static void twl_free_device_extension(TW_Device_Extension *tw_dev) | 
|  | { | 
|  | if (tw_dev->command_packet_virt[0]) | 
|  | pci_free_consistent(tw_dev->tw_pci_dev, | 
|  | sizeof(TW_Command_Full)*TW_Q_LENGTH, | 
|  | tw_dev->command_packet_virt[0], | 
|  | tw_dev->command_packet_phys[0]); | 
|  |  | 
|  | if (tw_dev->generic_buffer_virt[0]) | 
|  | pci_free_consistent(tw_dev->tw_pci_dev, | 
|  | TW_SECTOR_SIZE*TW_Q_LENGTH, | 
|  | tw_dev->generic_buffer_virt[0], | 
|  | tw_dev->generic_buffer_phys[0]); | 
|  |  | 
|  | if (tw_dev->sense_buffer_virt[0]) | 
|  | pci_free_consistent(tw_dev->tw_pci_dev, | 
|  | sizeof(TW_Command_Apache_Header)* | 
|  | TW_Q_LENGTH, | 
|  | tw_dev->sense_buffer_virt[0], | 
|  | tw_dev->sense_buffer_phys[0]); | 
|  |  | 
|  | kfree(tw_dev->event_queue[0]); | 
|  | } /* End twl_free_device_extension() */ | 
|  |  | 
|  | /* This function will get parameter table entries from the firmware */ | 
|  | static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) | 
|  | { | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Command *command_packet; | 
|  | TW_Param_Apache *param; | 
|  | void *retval = NULL; | 
|  |  | 
|  | /* Setup the command packet */ | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | memset(full_command_packet, 0, sizeof(TW_Command_Full)); | 
|  | command_packet = &full_command_packet->command.oldcommand; | 
|  |  | 
|  | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | 
|  | command_packet->size              = TW_COMMAND_SIZE; | 
|  | command_packet->request_id        = request_id; | 
|  | command_packet->byte6_offset.block_count = cpu_to_le16(1); | 
|  |  | 
|  | /* Now setup the param */ | 
|  | param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id]; | 
|  | memset(param, 0, TW_SECTOR_SIZE); | 
|  | param->table_id = cpu_to_le16(table_id | 0x8000); | 
|  | param->parameter_id = cpu_to_le16(parameter_id); | 
|  | param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes); | 
|  |  | 
|  | command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]); | 
|  | command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE); | 
|  |  | 
|  | /* Post the command packet to the board */ | 
|  | twl_post_command_packet(tw_dev, request_id); | 
|  |  | 
|  | /* Poll for completion */ | 
|  | if (twl_poll_response(tw_dev, request_id, 30)) | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param") | 
|  | else | 
|  | retval = (void *)&(param->data[0]); | 
|  |  | 
|  | tw_dev->posted_request_count--; | 
|  | tw_dev->state[request_id] = TW_S_INITIAL; | 
|  |  | 
|  | return retval; | 
|  | } /* End twl_get_param() */ | 
|  |  | 
|  | /* This function will send an initconnection command to controller */ | 
|  | static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits, | 
|  | u32 set_features, unsigned short current_fw_srl, | 
|  | unsigned short current_fw_arch_id, | 
|  | unsigned short current_fw_branch, | 
|  | unsigned short current_fw_build, | 
|  | unsigned short *fw_on_ctlr_srl, | 
|  | unsigned short *fw_on_ctlr_arch_id, | 
|  | unsigned short *fw_on_ctlr_branch, | 
|  | unsigned short *fw_on_ctlr_build, | 
|  | u32 *init_connect_result) | 
|  | { | 
|  | TW_Command_Full *full_command_packet; | 
|  | TW_Initconnect *tw_initconnect; | 
|  | int request_id = 0, retval = 1; | 
|  |  | 
|  | /* Initialize InitConnection command packet */ | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  | memset(full_command_packet, 0, sizeof(TW_Command_Full)); | 
|  | full_command_packet->header.header_desc.size_header = 128; | 
|  |  | 
|  | tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand; | 
|  | tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION); | 
|  | tw_initconnect->request_id = request_id; | 
|  | tw_initconnect->message_credits = cpu_to_le16(message_credits); | 
|  | tw_initconnect->features = set_features; | 
|  |  | 
|  | /* Turn on 64-bit sgl support if we need to */ | 
|  | tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0; | 
|  |  | 
|  | tw_initconnect->features = cpu_to_le32(tw_initconnect->features); | 
|  |  | 
|  | if (set_features & TW_EXTENDED_INIT_CONNECT) { | 
|  | tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED; | 
|  | tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl); | 
|  | tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id); | 
|  | tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch); | 
|  | tw_initconnect->fw_build = cpu_to_le16(current_fw_build); | 
|  | } else | 
|  | tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE; | 
|  |  | 
|  | /* Send command packet to the board */ | 
|  | twl_post_command_packet(tw_dev, request_id); | 
|  |  | 
|  | /* Poll for completion */ | 
|  | if (twl_poll_response(tw_dev, request_id, 30)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection"); | 
|  | } else { | 
|  | if (set_features & TW_EXTENDED_INIT_CONNECT) { | 
|  | *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl); | 
|  | *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id); | 
|  | *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch); | 
|  | *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build); | 
|  | *init_connect_result = le32_to_cpu(tw_initconnect->result); | 
|  | } | 
|  | retval = 0; | 
|  | } | 
|  |  | 
|  | tw_dev->posted_request_count--; | 
|  | tw_dev->state[request_id] = TW_S_INITIAL; | 
|  |  | 
|  | return retval; | 
|  | } /* End twl_initconnection() */ | 
|  |  | 
|  | /* This function will initialize the fields of a device extension */ | 
|  | static int twl_initialize_device_extension(TW_Device_Extension *tw_dev) | 
|  | { | 
|  | int i, retval = 1; | 
|  |  | 
|  | /* Initialize command packet buffers */ | 
|  | if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Initialize generic buffer */ | 
|  | if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Allocate sense buffers */ | 
|  | if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Allocate event info space */ | 
|  | tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL); | 
|  | if (!tw_dev->event_queue[0]) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < TW_Q_LENGTH; i++) { | 
|  | tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event))); | 
|  | tw_dev->free_queue[i] = i; | 
|  | tw_dev->state[i] = TW_S_INITIAL; | 
|  | } | 
|  |  | 
|  | tw_dev->free_head = TW_Q_START; | 
|  | tw_dev->free_tail = TW_Q_START; | 
|  | tw_dev->error_sequence_id = 1; | 
|  | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | 
|  |  | 
|  | mutex_init(&tw_dev->ioctl_lock); | 
|  | init_waitqueue_head(&tw_dev->ioctl_wqueue); | 
|  |  | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_initialize_device_extension() */ | 
|  |  | 
|  | /* This function will handle attention interrupts */ | 
|  | static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev) | 
|  | { | 
|  | int retval = 1; | 
|  | u32 request_id, doorbell; | 
|  |  | 
|  | /* Read doorbell status */ | 
|  | doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev)); | 
|  |  | 
|  | /* Check for controller errors */ | 
|  | if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Check if we need to perform an AEN drain */ | 
|  | if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) { | 
|  | if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) { | 
|  | twl_get_request_id(tw_dev, &request_id); | 
|  | if (twl_aen_read_queue(tw_dev, request_id)) { | 
|  | tw_dev->state[request_id] = TW_S_COMPLETED; | 
|  | twl_free_request_id(tw_dev, request_id); | 
|  | clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | retval = 0; | 
|  | out: | 
|  | /* Clear doorbell interrupt */ | 
|  | TWL_CLEAR_DB_INTERRUPT(tw_dev); | 
|  |  | 
|  | /* Make sure the clear was flushed by reading it back */ | 
|  | readl(TWL_HOBDBC_REG_ADDR(tw_dev)); | 
|  |  | 
|  | return retval; | 
|  | } /* End twl_handle_attention_interrupt() */ | 
|  |  | 
|  | /* Interrupt service routine */ | 
|  | static irqreturn_t twl_interrupt(int irq, void *dev_instance) | 
|  | { | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; | 
|  | int i, handled = 0, error = 0; | 
|  | dma_addr_t mfa = 0; | 
|  | u32 reg, regl, regh, response, request_id = 0; | 
|  | struct scsi_cmnd *cmd; | 
|  | TW_Command_Full *full_command_packet; | 
|  |  | 
|  | spin_lock(tw_dev->host->host_lock); | 
|  |  | 
|  | /* Read host interrupt status */ | 
|  | reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); | 
|  |  | 
|  | /* Check if this is our interrupt, otherwise bail */ | 
|  | if (!(reg & TWL_HISTATUS_VALID_INTERRUPT)) | 
|  | goto twl_interrupt_bail; | 
|  |  | 
|  | handled = 1; | 
|  |  | 
|  | /* If we are resetting, bail */ | 
|  | if (test_bit(TW_IN_RESET, &tw_dev->flags)) | 
|  | goto twl_interrupt_bail; | 
|  |  | 
|  | /* Attention interrupt */ | 
|  | if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) { | 
|  | if (twl_handle_attention_interrupt(tw_dev)) { | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  | goto twl_interrupt_bail; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Response interrupt */ | 
|  | while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) { | 
|  | if (sizeof(dma_addr_t) > 4) { | 
|  | regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev)); | 
|  | regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  | mfa = ((u64)regh << 32) | regl; | 
|  | } else | 
|  | mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  |  | 
|  | error = 0; | 
|  | response = (u32)mfa; | 
|  |  | 
|  | /* Check for command packet error */ | 
|  | if (!TW_NOTMFA_OUT(response)) { | 
|  | for (i=0;i<TW_Q_LENGTH;i++) { | 
|  | if (tw_dev->sense_buffer_phys[i] == mfa) { | 
|  | request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id); | 
|  | if (tw_dev->srb[request_id] != NULL) | 
|  | error = twl_fill_sense(tw_dev, i, request_id, 1, 1); | 
|  | else { | 
|  | /* Skip ioctl error prints */ | 
|  | if (request_id != tw_dev->chrdev_request_id) | 
|  | error = twl_fill_sense(tw_dev, i, request_id, 0, 1); | 
|  | else | 
|  | memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header)); | 
|  | } | 
|  |  | 
|  | /* Now re-post the sense buffer */ | 
|  | writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); | 
|  | writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } else | 
|  | request_id = TW_RESID_OUT(response); | 
|  |  | 
|  | full_command_packet = tw_dev->command_packet_virt[request_id]; | 
|  |  | 
|  | /* Check for correct state */ | 
|  | if (tw_dev->state[request_id] != TW_S_POSTED) { | 
|  | if (tw_dev->srb[request_id] != NULL) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted"); | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  | goto twl_interrupt_bail; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Check for internal command completion */ | 
|  | if (tw_dev->srb[request_id] == NULL) { | 
|  | if (request_id != tw_dev->chrdev_request_id) { | 
|  | if (twl_aen_complete(tw_dev, request_id)) | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt"); | 
|  | } else { | 
|  | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | 
|  | wake_up(&tw_dev->ioctl_wqueue); | 
|  | } | 
|  | } else { | 
|  | cmd = tw_dev->srb[request_id]; | 
|  |  | 
|  | if (!error) | 
|  | cmd->result = (DID_OK << 16); | 
|  |  | 
|  | /* Report residual bytes for single sgl */ | 
|  | if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) { | 
|  | if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id])) | 
|  | scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length); | 
|  | } | 
|  |  | 
|  | /* Now complete the io */ | 
|  | scsi_dma_unmap(cmd); | 
|  | cmd->scsi_done(cmd); | 
|  | tw_dev->state[request_id] = TW_S_COMPLETED; | 
|  | twl_free_request_id(tw_dev, request_id); | 
|  | tw_dev->posted_request_count--; | 
|  | } | 
|  |  | 
|  | /* Check for another response interrupt */ | 
|  | reg = readl(TWL_HISTAT_REG_ADDR(tw_dev)); | 
|  | } | 
|  |  | 
|  | twl_interrupt_bail: | 
|  | spin_unlock(tw_dev->host->host_lock); | 
|  | return IRQ_RETVAL(handled); | 
|  | } /* End twl_interrupt() */ | 
|  |  | 
|  | /* This function will poll for a register change */ | 
|  | static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds) | 
|  | { | 
|  | unsigned long before; | 
|  | int retval = 1; | 
|  | u32 reg_value; | 
|  |  | 
|  | reg_value = readl(reg); | 
|  | before = jiffies; | 
|  |  | 
|  | while ((reg_value & value) != result) { | 
|  | reg_value = readl(reg); | 
|  | if (time_after(jiffies, before + HZ * seconds)) | 
|  | goto out; | 
|  | msleep(50); | 
|  | } | 
|  | retval = 0; | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_poll_register() */ | 
|  |  | 
|  | /* This function will reset a controller */ | 
|  | static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) | 
|  | { | 
|  | int retval = 1; | 
|  | int i = 0; | 
|  | u32 status = 0; | 
|  | unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0; | 
|  | unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0; | 
|  | u32 init_connect_result = 0; | 
|  | int tries = 0; | 
|  | int do_soft_reset = soft_reset; | 
|  |  | 
|  | while (tries < TW_MAX_RESET_TRIES) { | 
|  | /* Do a soft reset if one is needed */ | 
|  | if (do_soft_reset) { | 
|  | TWL_SOFT_RESET(tw_dev); | 
|  |  | 
|  | /* Make sure controller is in a good state */ | 
|  | if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence"); | 
|  | tries++; | 
|  | continue; | 
|  | } | 
|  | if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence"); | 
|  | tries++; | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Initconnect */ | 
|  | if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS, | 
|  | TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL, | 
|  | TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH, | 
|  | TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl, | 
|  | &fw_on_ctlr_arch_id, &fw_on_ctlr_branch, | 
|  | &fw_on_ctlr_build, &init_connect_result)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL"); | 
|  | do_soft_reset = 1; | 
|  | tries++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Load sense buffers */ | 
|  | while (i < TW_Q_LENGTH) { | 
|  | writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev)); | 
|  | writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev)); | 
|  |  | 
|  | /* Check status for over-run after each write */ | 
|  | status = readl(TWL_STATUS_REG_ADDR(tw_dev)); | 
|  | if (!(status & TWL_STATUS_OVERRUN_SUBMIT)) | 
|  | i++; | 
|  | } | 
|  |  | 
|  | /* Now check status */ | 
|  | status = readl(TWL_STATUS_REG_ADDR(tw_dev)); | 
|  | if (status) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers"); | 
|  | do_soft_reset = 1; | 
|  | tries++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Drain the AEN queue */ | 
|  | if (twl_aen_drain_queue(tw_dev, soft_reset)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence"); | 
|  | do_soft_reset = 1; | 
|  | tries++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Load rest of compatibility struct */ | 
|  | strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION)); | 
|  | tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL; | 
|  | tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH; | 
|  | tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD; | 
|  | tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL; | 
|  | tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH; | 
|  | tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD; | 
|  | tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl; | 
|  | tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch; | 
|  | tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build; | 
|  |  | 
|  | /* If we got here, controller is in a good state */ | 
|  | retval = 0; | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_reset_sequence() */ | 
|  |  | 
|  | /* This function will reset a device extension */ | 
|  | static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) | 
|  | { | 
|  | int i = 0, retval = 1; | 
|  | unsigned long flags = 0; | 
|  |  | 
|  | /* Block SCSI requests while we are resetting */ | 
|  | if (ioctl_reset) | 
|  | scsi_block_requests(tw_dev->host); | 
|  |  | 
|  | set_bit(TW_IN_RESET, &tw_dev->flags); | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  | TWL_CLEAR_DB_INTERRUPT(tw_dev); | 
|  |  | 
|  | spin_lock_irqsave(tw_dev->host->host_lock, flags); | 
|  |  | 
|  | /* Abort all requests that are in progress */ | 
|  | for (i = 0; i < TW_Q_LENGTH; i++) { | 
|  | if ((tw_dev->state[i] != TW_S_FINISHED) && | 
|  | (tw_dev->state[i] != TW_S_INITIAL) && | 
|  | (tw_dev->state[i] != TW_S_COMPLETED)) { | 
|  | struct scsi_cmnd *cmd = tw_dev->srb[i]; | 
|  |  | 
|  | if (cmd) { | 
|  | cmd->result = (DID_RESET << 16); | 
|  | scsi_dma_unmap(cmd); | 
|  | cmd->scsi_done(cmd); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Reset queues and counts */ | 
|  | for (i = 0; i < TW_Q_LENGTH; i++) { | 
|  | tw_dev->free_queue[i] = i; | 
|  | tw_dev->state[i] = TW_S_INITIAL; | 
|  | } | 
|  | tw_dev->free_head = TW_Q_START; | 
|  | tw_dev->free_tail = TW_Q_START; | 
|  | tw_dev->posted_request_count = 0; | 
|  |  | 
|  | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | 
|  |  | 
|  | if (twl_reset_sequence(tw_dev, 1)) | 
|  | goto out; | 
|  |  | 
|  | TWL_UNMASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | clear_bit(TW_IN_RESET, &tw_dev->flags); | 
|  | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | 
|  |  | 
|  | retval = 0; | 
|  | out: | 
|  | if (ioctl_reset) | 
|  | scsi_unblock_requests(tw_dev->host); | 
|  | return retval; | 
|  | } /* End twl_reset_device_extension() */ | 
|  |  | 
|  | /* This funciton returns unit geometry in cylinders/heads/sectors */ | 
|  | static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) | 
|  | { | 
|  | int heads, sectors; | 
|  | TW_Device_Extension *tw_dev; | 
|  |  | 
|  | tw_dev = (TW_Device_Extension *)sdev->host->hostdata; | 
|  |  | 
|  | if (capacity >= 0x200000) { | 
|  | heads = 255; | 
|  | sectors = 63; | 
|  | } else { | 
|  | heads = 64; | 
|  | sectors = 32; | 
|  | } | 
|  |  | 
|  | geom[0] = heads; | 
|  | geom[1] = sectors; | 
|  | geom[2] = sector_div(capacity, heads * sectors); /* cylinders */ | 
|  |  | 
|  | return 0; | 
|  | } /* End twl_scsi_biosparam() */ | 
|  |  | 
|  | /* This is the new scsi eh reset function */ | 
|  | static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt) | 
|  | { | 
|  | TW_Device_Extension *tw_dev = NULL; | 
|  | int retval = FAILED; | 
|  |  | 
|  | tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; | 
|  |  | 
|  | tw_dev->num_resets++; | 
|  |  | 
|  | sdev_printk(KERN_WARNING, SCpnt->device, | 
|  | "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n", | 
|  | TW_DRIVER, 0x2c, SCpnt->cmnd[0]); | 
|  |  | 
|  | /* Make sure we are not issuing an ioctl or resetting from ioctl */ | 
|  | mutex_lock(&tw_dev->ioctl_lock); | 
|  |  | 
|  | /* Now reset the card and some of the device extension data */ | 
|  | if (twl_reset_device_extension(tw_dev, 0)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | retval = SUCCESS; | 
|  | out: | 
|  | mutex_unlock(&tw_dev->ioctl_lock); | 
|  | return retval; | 
|  | } /* End twl_scsi_eh_reset() */ | 
|  |  | 
|  | /* This is the main scsi queue function to handle scsi opcodes */ | 
|  | static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) | 
|  | { | 
|  | int request_id, retval; | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; | 
|  |  | 
|  | /* If we are resetting due to timed out ioctl, report as busy */ | 
|  | if (test_bit(TW_IN_RESET, &tw_dev->flags)) { | 
|  | retval = SCSI_MLQUEUE_HOST_BUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Save done function into scsi_cmnd struct */ | 
|  | SCpnt->scsi_done = done; | 
|  |  | 
|  | /* Get a free request id */ | 
|  | twl_get_request_id(tw_dev, &request_id); | 
|  |  | 
|  | /* Save the scsi command for use by the ISR */ | 
|  | tw_dev->srb[request_id] = SCpnt; | 
|  |  | 
|  | retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL); | 
|  | if (retval) { | 
|  | tw_dev->state[request_id] = TW_S_COMPLETED; | 
|  | twl_free_request_id(tw_dev, request_id); | 
|  | SCpnt->result = (DID_ERROR << 16); | 
|  | done(SCpnt); | 
|  | retval = 0; | 
|  | } | 
|  | out: | 
|  | return retval; | 
|  | } /* End twl_scsi_queue() */ | 
|  |  | 
|  | static DEF_SCSI_QCMD(twl_scsi_queue) | 
|  |  | 
|  | /* This function tells the controller to shut down */ | 
|  | static void __twl_shutdown(TW_Device_Extension *tw_dev) | 
|  | { | 
|  | /* Disable interrupts */ | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | /* Free up the IRQ */ | 
|  | free_irq(tw_dev->tw_pci_dev->irq, tw_dev); | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no); | 
|  |  | 
|  | /* Tell the card we are shutting down */ | 
|  | if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed"); | 
|  | } else { | 
|  | printk(KERN_WARNING "3w-sas: Shutdown complete.\n"); | 
|  | } | 
|  |  | 
|  | /* Clear doorbell interrupt just before exit */ | 
|  | TWL_CLEAR_DB_INTERRUPT(tw_dev); | 
|  | } /* End __twl_shutdown() */ | 
|  |  | 
|  | /* Wrapper for __twl_shutdown */ | 
|  | static void twl_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | struct Scsi_Host *host = pci_get_drvdata(pdev); | 
|  | TW_Device_Extension *tw_dev; | 
|  |  | 
|  | if (!host) | 
|  | return; | 
|  |  | 
|  | tw_dev = (TW_Device_Extension *)host->hostdata; | 
|  |  | 
|  | if (tw_dev->online) | 
|  | __twl_shutdown(tw_dev); | 
|  | } /* End twl_shutdown() */ | 
|  |  | 
|  | /* This function configures unit settings when a unit is coming on-line */ | 
|  | static int twl_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | /* Force 60 second timeout */ | 
|  | blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); | 
|  |  | 
|  | return 0; | 
|  | } /* End twl_slave_configure() */ | 
|  |  | 
|  | /* scsi_host_template initializer */ | 
|  | static struct scsi_host_template driver_template = { | 
|  | .module			= THIS_MODULE, | 
|  | .name			= "3w-sas", | 
|  | .queuecommand		= twl_scsi_queue, | 
|  | .eh_host_reset_handler	= twl_scsi_eh_reset, | 
|  | .bios_param		= twl_scsi_biosparam, | 
|  | .change_queue_depth	= scsi_change_queue_depth, | 
|  | .can_queue		= TW_Q_LENGTH-2, | 
|  | .slave_configure	= twl_slave_configure, | 
|  | .this_id		= -1, | 
|  | .sg_tablesize		= TW_LIBERATOR_MAX_SGL_LENGTH, | 
|  | .max_sectors		= TW_MAX_SECTORS, | 
|  | .cmd_per_lun		= TW_MAX_CMDS_PER_LUN, | 
|  | .use_clustering		= ENABLE_CLUSTERING, | 
|  | .shost_attrs		= twl_host_attrs, | 
|  | .emulated		= 1, | 
|  | .no_write_same		= 1, | 
|  | }; | 
|  |  | 
|  | /* This function will probe and initialize a card */ | 
|  | static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) | 
|  | { | 
|  | struct Scsi_Host *host = NULL; | 
|  | TW_Device_Extension *tw_dev; | 
|  | int retval = -ENODEV; | 
|  | int *ptr_phycount, phycount=0; | 
|  |  | 
|  | retval = pci_enable_device(pdev); | 
|  | if (retval) { | 
|  | TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device"); | 
|  | goto out_disable_device; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  | pci_try_set_mwi(pdev); | 
|  |  | 
|  | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) | 
|  | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) | 
|  | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) | 
|  | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { | 
|  | TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask"); | 
|  | retval = -ENODEV; | 
|  | goto out_disable_device; | 
|  | } | 
|  |  | 
|  | host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); | 
|  | if (!host) { | 
|  | TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension"); | 
|  | retval = -ENOMEM; | 
|  | goto out_disable_device; | 
|  | } | 
|  | tw_dev = shost_priv(host); | 
|  |  | 
|  | /* Save values to device extension */ | 
|  | tw_dev->host = host; | 
|  | tw_dev->tw_pci_dev = pdev; | 
|  |  | 
|  | if (twl_initialize_device_extension(tw_dev)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension"); | 
|  | retval = -ENOMEM; | 
|  | goto out_free_device_extension; | 
|  | } | 
|  |  | 
|  | /* Request IO regions */ | 
|  | retval = pci_request_regions(pdev, "3w-sas"); | 
|  | if (retval) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region"); | 
|  | goto out_free_device_extension; | 
|  | } | 
|  |  | 
|  | /* Save base address, use region 1 */ | 
|  | tw_dev->base_addr = pci_iomap(pdev, 1, 0); | 
|  | if (!tw_dev->base_addr) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap"); | 
|  | retval = -ENOMEM; | 
|  | goto out_release_mem_region; | 
|  | } | 
|  |  | 
|  | /* Disable interrupts on the card */ | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | /* Initialize the card */ | 
|  | if (twl_reset_sequence(tw_dev, 0)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe"); | 
|  | retval = -ENOMEM; | 
|  | goto out_iounmap; | 
|  | } | 
|  |  | 
|  | /* Set host specific parameters */ | 
|  | host->max_id = TW_MAX_UNITS; | 
|  | host->max_cmd_len = TW_MAX_CDB_LEN; | 
|  | host->max_lun = TW_MAX_LUNS; | 
|  | host->max_channel = 0; | 
|  |  | 
|  | /* Register the card with the kernel SCSI layer */ | 
|  | retval = scsi_add_host(host, &pdev->dev); | 
|  | if (retval) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed"); | 
|  | goto out_iounmap; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, host); | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n", | 
|  | host->host_no, | 
|  | (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, | 
|  | TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH), | 
|  | (u64)pci_resource_start(pdev, 1), pdev->irq); | 
|  |  | 
|  | ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE, | 
|  | TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH); | 
|  | if (ptr_phycount) | 
|  | phycount = le32_to_cpu(*(int *)ptr_phycount); | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n", | 
|  | host->host_no, | 
|  | (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE, | 
|  | TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH), | 
|  | (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE, | 
|  | TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH), | 
|  | phycount); | 
|  |  | 
|  | /* Try to enable MSI */ | 
|  | if (use_msi && !pci_enable_msi(pdev)) | 
|  | set_bit(TW_USING_MSI, &tw_dev->flags); | 
|  |  | 
|  | /* Now setup the interrupt handler */ | 
|  | retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); | 
|  | if (retval) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ"); | 
|  | goto out_remove_host; | 
|  | } | 
|  |  | 
|  | twl_device_extension_list[twl_device_extension_count] = tw_dev; | 
|  | twl_device_extension_count++; | 
|  |  | 
|  | /* Re-enable interrupts on the card */ | 
|  | TWL_UNMASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | /* Finally, scan the host */ | 
|  | scsi_scan_host(host); | 
|  |  | 
|  | /* Add sysfs binary files */ | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr)) | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read"); | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr)) | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info"); | 
|  |  | 
|  | if (twl_major == -1) { | 
|  | if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0) | 
|  | TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device"); | 
|  | } | 
|  | tw_dev->online = 1; | 
|  | return 0; | 
|  |  | 
|  | out_remove_host: | 
|  | if (test_bit(TW_USING_MSI, &tw_dev->flags)) | 
|  | pci_disable_msi(pdev); | 
|  | scsi_remove_host(host); | 
|  | out_iounmap: | 
|  | iounmap(tw_dev->base_addr); | 
|  | out_release_mem_region: | 
|  | pci_release_regions(pdev); | 
|  | out_free_device_extension: | 
|  | twl_free_device_extension(tw_dev); | 
|  | scsi_host_put(host); | 
|  | out_disable_device: | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return retval; | 
|  | } /* End twl_probe() */ | 
|  |  | 
|  | /* This function is called to remove a device */ | 
|  | static void twl_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct Scsi_Host *host = pci_get_drvdata(pdev); | 
|  | TW_Device_Extension *tw_dev; | 
|  |  | 
|  | if (!host) | 
|  | return; | 
|  |  | 
|  | tw_dev = (TW_Device_Extension *)host->hostdata; | 
|  |  | 
|  | if (!tw_dev->online) | 
|  | return; | 
|  |  | 
|  | /* Remove sysfs binary files */ | 
|  | sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr); | 
|  | sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr); | 
|  |  | 
|  | scsi_remove_host(tw_dev->host); | 
|  |  | 
|  | /* Unregister character device */ | 
|  | if (twl_major >= 0) { | 
|  | unregister_chrdev(twl_major, "twl"); | 
|  | twl_major = -1; | 
|  | } | 
|  |  | 
|  | /* Shutdown the card */ | 
|  | __twl_shutdown(tw_dev); | 
|  |  | 
|  | /* Disable MSI if enabled */ | 
|  | if (test_bit(TW_USING_MSI, &tw_dev->flags)) | 
|  | pci_disable_msi(pdev); | 
|  |  | 
|  | /* Free IO remapping */ | 
|  | iounmap(tw_dev->base_addr); | 
|  |  | 
|  | /* Free up the mem region */ | 
|  | pci_release_regions(pdev); | 
|  |  | 
|  | /* Free up device extension resources */ | 
|  | twl_free_device_extension(tw_dev); | 
|  |  | 
|  | scsi_host_put(tw_dev->host); | 
|  | pci_disable_device(pdev); | 
|  | twl_device_extension_count--; | 
|  | } /* End twl_remove() */ | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /* This function is called on PCI suspend */ | 
|  | static int twl_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | struct Scsi_Host *host = pci_get_drvdata(pdev); | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no); | 
|  | /* Disable interrupts */ | 
|  | TWL_MASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | free_irq(tw_dev->tw_pci_dev->irq, tw_dev); | 
|  |  | 
|  | /* Tell the card we are shutting down */ | 
|  | if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend"); | 
|  | } else { | 
|  | printk(KERN_WARNING "3w-sas: Suspend complete.\n"); | 
|  | } | 
|  |  | 
|  | /* Clear doorbell interrupt */ | 
|  | TWL_CLEAR_DB_INTERRUPT(tw_dev); | 
|  |  | 
|  | pci_save_state(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_power_state(pdev, pci_choose_state(pdev, state)); | 
|  |  | 
|  | return 0; | 
|  | } /* End twl_suspend() */ | 
|  |  | 
|  | /* This function is called on PCI resume */ | 
|  | static int twl_resume(struct pci_dev *pdev) | 
|  | { | 
|  | int retval = 0; | 
|  | struct Scsi_Host *host = pci_get_drvdata(pdev); | 
|  | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no); | 
|  | pci_set_power_state(pdev, PCI_D0); | 
|  | pci_enable_wake(pdev, PCI_D0, 0); | 
|  | pci_restore_state(pdev); | 
|  |  | 
|  | retval = pci_enable_device(pdev); | 
|  | if (retval) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume"); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  | pci_try_set_mwi(pdev); | 
|  |  | 
|  | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) | 
|  | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) | 
|  | if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) | 
|  | || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { | 
|  | TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume"); | 
|  | retval = -ENODEV; | 
|  | goto out_disable_device; | 
|  | } | 
|  |  | 
|  | /* Initialize the card */ | 
|  | if (twl_reset_sequence(tw_dev, 0)) { | 
|  | retval = -ENODEV; | 
|  | goto out_disable_device; | 
|  | } | 
|  |  | 
|  | /* Now setup the interrupt handler */ | 
|  | retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev); | 
|  | if (retval) { | 
|  | TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume"); | 
|  | retval = -ENODEV; | 
|  | goto out_disable_device; | 
|  | } | 
|  |  | 
|  | /* Now enable MSI if enabled */ | 
|  | if (test_bit(TW_USING_MSI, &tw_dev->flags)) | 
|  | pci_enable_msi(pdev); | 
|  |  | 
|  | /* Re-enable interrupts on the card */ | 
|  | TWL_UNMASK_INTERRUPTS(tw_dev); | 
|  |  | 
|  | printk(KERN_WARNING "3w-sas: Resume complete.\n"); | 
|  | return 0; | 
|  |  | 
|  | out_disable_device: | 
|  | scsi_remove_host(host); | 
|  | pci_disable_device(pdev); | 
|  |  | 
|  | return retval; | 
|  | } /* End twl_resume() */ | 
|  | #endif | 
|  |  | 
|  | /* PCI Devices supported by this driver */ | 
|  | static struct pci_device_id twl_pci_tbl[] = { | 
|  | { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, twl_pci_tbl); | 
|  |  | 
|  | /* pci_driver initializer */ | 
|  | static struct pci_driver twl_driver = { | 
|  | .name		= "3w-sas", | 
|  | .id_table	= twl_pci_tbl, | 
|  | .probe		= twl_probe, | 
|  | .remove		= twl_remove, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend	= twl_suspend, | 
|  | .resume		= twl_resume, | 
|  | #endif | 
|  | .shutdown	= twl_shutdown | 
|  | }; | 
|  |  | 
|  | /* This function is called on driver initialization */ | 
|  | static int __init twl_init(void) | 
|  | { | 
|  | printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); | 
|  |  | 
|  | return pci_register_driver(&twl_driver); | 
|  | } /* End twl_init() */ | 
|  |  | 
|  | /* This function is called on driver exit */ | 
|  | static void __exit twl_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&twl_driver); | 
|  | } /* End twl_exit() */ | 
|  |  | 
|  | module_init(twl_init); | 
|  | module_exit(twl_exit); | 
|  |  |