|  | /* | 
|  | * CXL Flash Device Driver | 
|  | * | 
|  | * Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation | 
|  | *             Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation | 
|  | * | 
|  | * Copyright (C) 2015 IBM Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include <asm/bitsperlong.h> | 
|  |  | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <uapi/scsi/cxlflash_ioctl.h> | 
|  |  | 
|  | #include "sislite.h" | 
|  | #include "common.h" | 
|  | #include "vlun.h" | 
|  | #include "superpipe.h" | 
|  |  | 
|  | /** | 
|  | * marshal_virt_to_resize() - translate uvirtual to resize structure | 
|  | * @virt:	Source structure from which to translate/copy. | 
|  | * @resize:	Destination structure for the translate/copy. | 
|  | */ | 
|  | static void marshal_virt_to_resize(struct dk_cxlflash_uvirtual *virt, | 
|  | struct dk_cxlflash_resize *resize) | 
|  | { | 
|  | resize->hdr = virt->hdr; | 
|  | resize->context_id = virt->context_id; | 
|  | resize->rsrc_handle = virt->rsrc_handle; | 
|  | resize->req_size = virt->lun_size; | 
|  | resize->last_lba = virt->last_lba; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * marshal_clone_to_rele() - translate clone to release structure | 
|  | * @clone:	Source structure from which to translate/copy. | 
|  | * @rele:	Destination structure for the translate/copy. | 
|  | */ | 
|  | static void marshal_clone_to_rele(struct dk_cxlflash_clone *clone, | 
|  | struct dk_cxlflash_release *release) | 
|  | { | 
|  | release->hdr = clone->hdr; | 
|  | release->context_id = clone->context_id_dst; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ba_init() - initializes a block allocator | 
|  | * @ba_lun:	Block allocator to initialize. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int ba_init(struct ba_lun *ba_lun) | 
|  | { | 
|  | struct ba_lun_info *bali = NULL; | 
|  | int lun_size_au = 0, i = 0; | 
|  | int last_word_underflow = 0; | 
|  | u64 *lam; | 
|  |  | 
|  | pr_debug("%s: Initializing LUN: lun_id=%016llx " | 
|  | "ba_lun->lsize=%lx ba_lun->au_size=%lX\n", | 
|  | __func__, ba_lun->lun_id, ba_lun->lsize, ba_lun->au_size); | 
|  |  | 
|  | /* Calculate bit map size */ | 
|  | lun_size_au = ba_lun->lsize / ba_lun->au_size; | 
|  | if (lun_size_au == 0) { | 
|  | pr_debug("%s: Requested LUN size of 0!\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Allocate lun information container */ | 
|  | bali = kzalloc(sizeof(struct ba_lun_info), GFP_KERNEL); | 
|  | if (unlikely(!bali)) { | 
|  | pr_err("%s: Failed to allocate lun_info lun_id=%016llx\n", | 
|  | __func__, ba_lun->lun_id); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | bali->total_aus = lun_size_au; | 
|  | bali->lun_bmap_size = lun_size_au / BITS_PER_LONG; | 
|  |  | 
|  | if (lun_size_au % BITS_PER_LONG) | 
|  | bali->lun_bmap_size++; | 
|  |  | 
|  | /* Allocate bitmap space */ | 
|  | bali->lun_alloc_map = kzalloc((bali->lun_bmap_size * sizeof(u64)), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!bali->lun_alloc_map)) { | 
|  | pr_err("%s: Failed to allocate lun allocation map: " | 
|  | "lun_id=%016llx\n", __func__, ba_lun->lun_id); | 
|  | kfree(bali); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Initialize the bit map size and set all bits to '1' */ | 
|  | bali->free_aun_cnt = lun_size_au; | 
|  |  | 
|  | for (i = 0; i < bali->lun_bmap_size; i++) | 
|  | bali->lun_alloc_map[i] = 0xFFFFFFFFFFFFFFFFULL; | 
|  |  | 
|  | /* If the last word not fully utilized, mark extra bits as allocated */ | 
|  | last_word_underflow = (bali->lun_bmap_size * BITS_PER_LONG); | 
|  | last_word_underflow -= bali->free_aun_cnt; | 
|  | if (last_word_underflow > 0) { | 
|  | lam = &bali->lun_alloc_map[bali->lun_bmap_size - 1]; | 
|  | for (i = (HIBIT - last_word_underflow + 1); | 
|  | i < BITS_PER_LONG; | 
|  | i++) | 
|  | clear_bit(i, (ulong *)lam); | 
|  | } | 
|  |  | 
|  | /* Initialize high elevator index, low/curr already at 0 from kzalloc */ | 
|  | bali->free_high_idx = bali->lun_bmap_size; | 
|  |  | 
|  | /* Allocate clone map */ | 
|  | bali->aun_clone_map = kzalloc((bali->total_aus * sizeof(u8)), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!bali->aun_clone_map)) { | 
|  | pr_err("%s: Failed to allocate clone map: lun_id=%016llx\n", | 
|  | __func__, ba_lun->lun_id); | 
|  | kfree(bali->lun_alloc_map); | 
|  | kfree(bali); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Pass the allocated LUN info as a handle to the user */ | 
|  | ba_lun->ba_lun_handle = bali; | 
|  |  | 
|  | pr_debug("%s: Successfully initialized the LUN: " | 
|  | "lun_id=%016llx bitmap size=%x, free_aun_cnt=%llx\n", | 
|  | __func__, ba_lun->lun_id, bali->lun_bmap_size, | 
|  | bali->free_aun_cnt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * find_free_range() - locates a free bit within the block allocator | 
|  | * @low:	First word in block allocator to start search. | 
|  | * @high:	Last word in block allocator to search. | 
|  | * @bali:	LUN information structure owning the block allocator to search. | 
|  | * @bit_word:	Passes back the word in the block allocator owning the free bit. | 
|  | * | 
|  | * Return: The bit position within the passed back word, -1 on failure | 
|  | */ | 
|  | static int find_free_range(u32 low, | 
|  | u32 high, | 
|  | struct ba_lun_info *bali, int *bit_word) | 
|  | { | 
|  | int i; | 
|  | u64 bit_pos = -1; | 
|  | ulong *lam, num_bits; | 
|  |  | 
|  | for (i = low; i < high; i++) | 
|  | if (bali->lun_alloc_map[i] != 0) { | 
|  | lam = (ulong *)&bali->lun_alloc_map[i]; | 
|  | num_bits = (sizeof(*lam) * BITS_PER_BYTE); | 
|  | bit_pos = find_first_bit(lam, num_bits); | 
|  |  | 
|  | pr_devel("%s: Found free bit %llu in LUN " | 
|  | "map entry %016llx at bitmap index = %d\n", | 
|  | __func__, bit_pos, bali->lun_alloc_map[i], i); | 
|  |  | 
|  | *bit_word = i; | 
|  | bali->free_aun_cnt--; | 
|  | clear_bit(bit_pos, lam); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return bit_pos; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ba_alloc() - allocates a block from the block allocator | 
|  | * @ba_lun:	Block allocator from which to allocate a block. | 
|  | * | 
|  | * Return: The allocated block, -1 on failure | 
|  | */ | 
|  | static u64 ba_alloc(struct ba_lun *ba_lun) | 
|  | { | 
|  | u64 bit_pos = -1; | 
|  | int bit_word = 0; | 
|  | struct ba_lun_info *bali = NULL; | 
|  |  | 
|  | bali = ba_lun->ba_lun_handle; | 
|  |  | 
|  | pr_debug("%s: Received block allocation request: " | 
|  | "lun_id=%016llx free_aun_cnt=%llx\n", | 
|  | __func__, ba_lun->lun_id, bali->free_aun_cnt); | 
|  |  | 
|  | if (bali->free_aun_cnt == 0) { | 
|  | pr_debug("%s: No space left on LUN: lun_id=%016llx\n", | 
|  | __func__, ba_lun->lun_id); | 
|  | return -1ULL; | 
|  | } | 
|  |  | 
|  | /* Search to find a free entry, curr->high then low->curr */ | 
|  | bit_pos = find_free_range(bali->free_curr_idx, | 
|  | bali->free_high_idx, bali, &bit_word); | 
|  | if (bit_pos == -1) { | 
|  | bit_pos = find_free_range(bali->free_low_idx, | 
|  | bali->free_curr_idx, | 
|  | bali, &bit_word); | 
|  | if (bit_pos == -1) { | 
|  | pr_debug("%s: Could not find an allocation unit on LUN:" | 
|  | " lun_id=%016llx\n", __func__, ba_lun->lun_id); | 
|  | return -1ULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Update the free_curr_idx */ | 
|  | if (bit_pos == HIBIT) | 
|  | bali->free_curr_idx = bit_word + 1; | 
|  | else | 
|  | bali->free_curr_idx = bit_word; | 
|  |  | 
|  | pr_debug("%s: Allocating AU number=%llx lun_id=%016llx " | 
|  | "free_aun_cnt=%llx\n", __func__, | 
|  | ((bit_word * BITS_PER_LONG) + bit_pos), ba_lun->lun_id, | 
|  | bali->free_aun_cnt); | 
|  |  | 
|  | return (u64) ((bit_word * BITS_PER_LONG) + bit_pos); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * validate_alloc() - validates the specified block has been allocated | 
|  | * @ba_lun_info:	LUN info owning the block allocator. | 
|  | * @aun:		Block to validate. | 
|  | * | 
|  | * Return: 0 on success, -1 on failure | 
|  | */ | 
|  | static int validate_alloc(struct ba_lun_info *bali, u64 aun) | 
|  | { | 
|  | int idx = 0, bit_pos = 0; | 
|  |  | 
|  | idx = aun / BITS_PER_LONG; | 
|  | bit_pos = aun % BITS_PER_LONG; | 
|  |  | 
|  | if (test_bit(bit_pos, (ulong *)&bali->lun_alloc_map[idx])) | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ba_free() - frees a block from the block allocator | 
|  | * @ba_lun:	Block allocator from which to allocate a block. | 
|  | * @to_free:	Block to free. | 
|  | * | 
|  | * Return: 0 on success, -1 on failure | 
|  | */ | 
|  | static int ba_free(struct ba_lun *ba_lun, u64 to_free) | 
|  | { | 
|  | int idx = 0, bit_pos = 0; | 
|  | struct ba_lun_info *bali = NULL; | 
|  |  | 
|  | bali = ba_lun->ba_lun_handle; | 
|  |  | 
|  | if (validate_alloc(bali, to_free)) { | 
|  | pr_debug("%s: AUN %llx is not allocated on lun_id=%016llx\n", | 
|  | __func__, to_free, ba_lun->lun_id); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: Received a request to free AU=%llx lun_id=%016llx " | 
|  | "free_aun_cnt=%llx\n", __func__, to_free, ba_lun->lun_id, | 
|  | bali->free_aun_cnt); | 
|  |  | 
|  | if (bali->aun_clone_map[to_free] > 0) { | 
|  | pr_debug("%s: AUN %llx lun_id=%016llx cloned. Clone count=%x\n", | 
|  | __func__, to_free, ba_lun->lun_id, | 
|  | bali->aun_clone_map[to_free]); | 
|  | bali->aun_clone_map[to_free]--; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | idx = to_free / BITS_PER_LONG; | 
|  | bit_pos = to_free % BITS_PER_LONG; | 
|  |  | 
|  | set_bit(bit_pos, (ulong *)&bali->lun_alloc_map[idx]); | 
|  | bali->free_aun_cnt++; | 
|  |  | 
|  | if (idx < bali->free_low_idx) | 
|  | bali->free_low_idx = idx; | 
|  | else if (idx > bali->free_high_idx) | 
|  | bali->free_high_idx = idx; | 
|  |  | 
|  | pr_debug("%s: Successfully freed AU bit_pos=%x bit map index=%x " | 
|  | "lun_id=%016llx free_aun_cnt=%llx\n", __func__, bit_pos, idx, | 
|  | ba_lun->lun_id, bali->free_aun_cnt); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ba_clone() - Clone a chunk of the block allocation table | 
|  | * @ba_lun:	Block allocator from which to allocate a block. | 
|  | * @to_free:	Block to free. | 
|  | * | 
|  | * Return: 0 on success, -1 on failure | 
|  | */ | 
|  | static int ba_clone(struct ba_lun *ba_lun, u64 to_clone) | 
|  | { | 
|  | struct ba_lun_info *bali = ba_lun->ba_lun_handle; | 
|  |  | 
|  | if (validate_alloc(bali, to_clone)) { | 
|  | pr_debug("%s: AUN=%llx not allocated on lun_id=%016llx\n", | 
|  | __func__, to_clone, ba_lun->lun_id); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: Received a request to clone AUN %llx on lun_id=%016llx\n", | 
|  | __func__, to_clone, ba_lun->lun_id); | 
|  |  | 
|  | if (bali->aun_clone_map[to_clone] == MAX_AUN_CLONE_CNT) { | 
|  | pr_debug("%s: AUN %llx on lun_id=%016llx hit max clones already\n", | 
|  | __func__, to_clone, ba_lun->lun_id); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | bali->aun_clone_map[to_clone]++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ba_space() - returns the amount of free space left in the block allocator | 
|  | * @ba_lun:	Block allocator. | 
|  | * | 
|  | * Return: Amount of free space in block allocator | 
|  | */ | 
|  | static u64 ba_space(struct ba_lun *ba_lun) | 
|  | { | 
|  | struct ba_lun_info *bali = ba_lun->ba_lun_handle; | 
|  |  | 
|  | return bali->free_aun_cnt; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cxlflash_ba_terminate() - frees resources associated with the block allocator | 
|  | * @ba_lun:	Block allocator. | 
|  | * | 
|  | * Safe to call in a partially allocated state. | 
|  | */ | 
|  | void cxlflash_ba_terminate(struct ba_lun *ba_lun) | 
|  | { | 
|  | struct ba_lun_info *bali = ba_lun->ba_lun_handle; | 
|  |  | 
|  | if (bali) { | 
|  | kfree(bali->aun_clone_map); | 
|  | kfree(bali->lun_alloc_map); | 
|  | kfree(bali); | 
|  | ba_lun->ba_lun_handle = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * init_vlun() - initializes a LUN for virtual use | 
|  | * @lun_info:	LUN information structure that owns the block allocator. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int init_vlun(struct llun_info *lli) | 
|  | { | 
|  | int rc = 0; | 
|  | struct glun_info *gli = lli->parent; | 
|  | struct blka *blka = &gli->blka; | 
|  |  | 
|  | memset(blka, 0, sizeof(*blka)); | 
|  | mutex_init(&blka->mutex); | 
|  |  | 
|  | /* LUN IDs are unique per port, save the index instead */ | 
|  | blka->ba_lun.lun_id = lli->lun_index; | 
|  | blka->ba_lun.lsize = gli->max_lba + 1; | 
|  | blka->ba_lun.lba_size = gli->blk_len; | 
|  |  | 
|  | blka->ba_lun.au_size = MC_CHUNK_SIZE; | 
|  | blka->nchunk = blka->ba_lun.lsize / MC_CHUNK_SIZE; | 
|  |  | 
|  | rc = ba_init(&blka->ba_lun); | 
|  | if (unlikely(rc)) | 
|  | pr_debug("%s: cannot init block_alloc, rc=%d\n", __func__, rc); | 
|  |  | 
|  | pr_debug("%s: returning rc=%d lli=%p\n", __func__, rc, lli); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * write_same16() - sends a SCSI WRITE_SAME16 (0) command to specified LUN | 
|  | * @sdev:	SCSI device associated with LUN. | 
|  | * @lba:	Logical block address to start write same. | 
|  | * @nblks:	Number of logical blocks to write same. | 
|  | * | 
|  | * The SCSI WRITE_SAME16 can take quite a while to complete. Should an EEH occur | 
|  | * while in scsi_execute(), the EEH handler will attempt to recover. As part of | 
|  | * the recovery, the handler drains all currently running ioctls, waiting until | 
|  | * they have completed before proceeding with a reset. As this routine is used | 
|  | * on the ioctl path, this can create a condition where the EEH handler becomes | 
|  | * stuck, infinitely waiting for this ioctl thread. To avoid this behavior, | 
|  | * temporarily unmark this thread as an ioctl thread by releasing the ioctl read | 
|  | * semaphore. This will allow the EEH handler to proceed with a recovery while | 
|  | * this thread is still running. Once the scsi_execute() returns, reacquire the | 
|  | * ioctl read semaphore and check the adapter state in case it changed while | 
|  | * inside of scsi_execute(). The state check will wait if the adapter is still | 
|  | * being recovered or return a failure if the recovery failed. In the event that | 
|  | * the adapter reset failed, simply return the failure as the ioctl would be | 
|  | * unable to continue. | 
|  | * | 
|  | * Note that the above puts a requirement on this routine to only be called on | 
|  | * an ioctl thread. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int write_same16(struct scsi_device *sdev, | 
|  | u64 lba, | 
|  | u32 nblks) | 
|  | { | 
|  | u8 *cmd_buf = NULL; | 
|  | u8 *scsi_cmd = NULL; | 
|  | int rc = 0; | 
|  | int result = 0; | 
|  | u64 offset = lba; | 
|  | int left = nblks; | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | const u32 s = ilog2(sdev->sector_size) - 9; | 
|  | const u32 to = sdev->request_queue->rq_timeout; | 
|  | const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue, | 
|  | REQ_OP_WRITE_SAME) >> s; | 
|  |  | 
|  | cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL); | 
|  | scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL); | 
|  | if (unlikely(!cmd_buf || !scsi_cmd)) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | while (left > 0) { | 
|  |  | 
|  | scsi_cmd[0] = WRITE_SAME_16; | 
|  | scsi_cmd[1] = cfg->ws_unmap ? 0x8 : 0; | 
|  | put_unaligned_be64(offset, &scsi_cmd[2]); | 
|  | put_unaligned_be32(ws_limit < left ? ws_limit : left, | 
|  | &scsi_cmd[10]); | 
|  |  | 
|  | /* Drop the ioctl read semahpore across lengthy call */ | 
|  | up_read(&cfg->ioctl_rwsem); | 
|  | result = scsi_execute(sdev, scsi_cmd, DMA_TO_DEVICE, cmd_buf, | 
|  | CMD_BUFSIZE, NULL, NULL, to, | 
|  | CMD_RETRIES, 0, 0, NULL); | 
|  | down_read(&cfg->ioctl_rwsem); | 
|  | rc = check_state(cfg); | 
|  | if (rc) { | 
|  | dev_err(dev, "%s: Failed state result=%08x\n", | 
|  | __func__, result); | 
|  | rc = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (result) { | 
|  | dev_err_ratelimited(dev, "%s: command failed for " | 
|  | "offset=%lld result=%08x\n", | 
|  | __func__, offset, result); | 
|  | rc = -EIO; | 
|  | goto out; | 
|  | } | 
|  | left -= ws_limit; | 
|  | offset += ws_limit; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd_buf); | 
|  | kfree(scsi_cmd); | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * grow_lxt() - expands the translation table associated with the specified RHTE | 
|  | * @afu:	AFU associated with the host. | 
|  | * @sdev:	SCSI device associated with LUN. | 
|  | * @ctxid:	Context ID of context owning the RHTE. | 
|  | * @rhndl:	Resource handle associated with the RHTE. | 
|  | * @rhte:	Resource handle entry (RHTE). | 
|  | * @new_size:	Number of translation entries associated with RHTE. | 
|  | * | 
|  | * By design, this routine employs a 'best attempt' allocation and will | 
|  | * truncate the requested size down if there is not sufficient space in | 
|  | * the block allocator to satisfy the request but there does exist some | 
|  | * amount of space. The user is made aware of this by returning the size | 
|  | * allocated. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int grow_lxt(struct afu *afu, | 
|  | struct scsi_device *sdev, | 
|  | ctx_hndl_t ctxid, | 
|  | res_hndl_t rhndl, | 
|  | struct sisl_rht_entry *rhte, | 
|  | u64 *new_size) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct sisl_lxt_entry *lxt = NULL, *lxt_old = NULL; | 
|  | struct llun_info *lli = sdev->hostdata; | 
|  | struct glun_info *gli = lli->parent; | 
|  | struct blka *blka = &gli->blka; | 
|  | u32 av_size; | 
|  | u32 ngrps, ngrps_old; | 
|  | u64 aun;		/* chunk# allocated by block allocator */ | 
|  | u64 delta = *new_size - rhte->lxt_cnt; | 
|  | u64 my_new_size; | 
|  | int i, rc = 0; | 
|  |  | 
|  | /* | 
|  | * Check what is available in the block allocator before re-allocating | 
|  | * LXT array. This is done up front under the mutex which must not be | 
|  | * released until after allocation is complete. | 
|  | */ | 
|  | mutex_lock(&blka->mutex); | 
|  | av_size = ba_space(&blka->ba_lun); | 
|  | if (unlikely(av_size <= 0)) { | 
|  | dev_dbg(dev, "%s: ba_space error av_size=%d\n", | 
|  | __func__, av_size); | 
|  | mutex_unlock(&blka->mutex); | 
|  | rc = -ENOSPC; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (av_size < delta) | 
|  | delta = av_size; | 
|  |  | 
|  | lxt_old = rhte->lxt_start; | 
|  | ngrps_old = LXT_NUM_GROUPS(rhte->lxt_cnt); | 
|  | ngrps = LXT_NUM_GROUPS(rhte->lxt_cnt + delta); | 
|  |  | 
|  | if (ngrps != ngrps_old) { | 
|  | /* reallocate to fit new size */ | 
|  | lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!lxt)) { | 
|  | mutex_unlock(&blka->mutex); | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* copy over all old entries */ | 
|  | memcpy(lxt, lxt_old, (sizeof(*lxt) * rhte->lxt_cnt)); | 
|  | } else | 
|  | lxt = lxt_old; | 
|  |  | 
|  | /* nothing can fail from now on */ | 
|  | my_new_size = rhte->lxt_cnt + delta; | 
|  |  | 
|  | /* add new entries to the end */ | 
|  | for (i = rhte->lxt_cnt; i < my_new_size; i++) { | 
|  | /* | 
|  | * Due to the earlier check of available space, ba_alloc | 
|  | * cannot fail here. If it did due to internal error, | 
|  | * leave a rlba_base of -1u which will likely be a | 
|  | * invalid LUN (too large). | 
|  | */ | 
|  | aun = ba_alloc(&blka->ba_lun); | 
|  | if ((aun == -1ULL) || (aun >= blka->nchunk)) | 
|  | dev_dbg(dev, "%s: ba_alloc error allocated chunk=%llu " | 
|  | "max=%llu\n", __func__, aun, blka->nchunk - 1); | 
|  |  | 
|  | /* select both ports, use r/w perms from RHT */ | 
|  | lxt[i].rlba_base = ((aun << MC_CHUNK_SHIFT) | | 
|  | (lli->lun_index << LXT_LUNIDX_SHIFT) | | 
|  | (RHT_PERM_RW << LXT_PERM_SHIFT | | 
|  | lli->port_sel)); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&blka->mutex); | 
|  |  | 
|  | /* | 
|  | * The following sequence is prescribed in the SISlite spec | 
|  | * for syncing up with the AFU when adding LXT entries. | 
|  | */ | 
|  | dma_wmb(); /* Make LXT updates are visible */ | 
|  |  | 
|  | rhte->lxt_start = lxt; | 
|  | dma_wmb(); /* Make RHT entry's LXT table update visible */ | 
|  |  | 
|  | rhte->lxt_cnt = my_new_size; | 
|  | dma_wmb(); /* Make RHT entry's LXT table size update visible */ | 
|  |  | 
|  | rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_LW_SYNC); | 
|  | if (unlikely(rc)) | 
|  | rc = -EAGAIN; | 
|  |  | 
|  | /* free old lxt if reallocated */ | 
|  | if (lxt != lxt_old) | 
|  | kfree(lxt_old); | 
|  | *new_size = my_new_size; | 
|  | out: | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * shrink_lxt() - reduces translation table associated with the specified RHTE | 
|  | * @afu:	AFU associated with the host. | 
|  | * @sdev:	SCSI device associated with LUN. | 
|  | * @rhndl:	Resource handle associated with the RHTE. | 
|  | * @rhte:	Resource handle entry (RHTE). | 
|  | * @ctxi:	Context owning resources. | 
|  | * @new_size:	Number of translation entries associated with RHTE. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int shrink_lxt(struct afu *afu, | 
|  | struct scsi_device *sdev, | 
|  | res_hndl_t rhndl, | 
|  | struct sisl_rht_entry *rhte, | 
|  | struct ctx_info *ctxi, | 
|  | u64 *new_size) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct sisl_lxt_entry *lxt, *lxt_old; | 
|  | struct llun_info *lli = sdev->hostdata; | 
|  | struct glun_info *gli = lli->parent; | 
|  | struct blka *blka = &gli->blka; | 
|  | ctx_hndl_t ctxid = DECODE_CTXID(ctxi->ctxid); | 
|  | bool needs_ws = ctxi->rht_needs_ws[rhndl]; | 
|  | bool needs_sync = !ctxi->err_recovery_active; | 
|  | u32 ngrps, ngrps_old; | 
|  | u64 aun;		/* chunk# allocated by block allocator */ | 
|  | u64 delta = rhte->lxt_cnt - *new_size; | 
|  | u64 my_new_size; | 
|  | int i, rc = 0; | 
|  |  | 
|  | lxt_old = rhte->lxt_start; | 
|  | ngrps_old = LXT_NUM_GROUPS(rhte->lxt_cnt); | 
|  | ngrps = LXT_NUM_GROUPS(rhte->lxt_cnt - delta); | 
|  |  | 
|  | if (ngrps != ngrps_old) { | 
|  | /* Reallocate to fit new size unless new size is 0 */ | 
|  | if (ngrps) { | 
|  | lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!lxt)) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Copy over old entries that will remain */ | 
|  | memcpy(lxt, lxt_old, | 
|  | (sizeof(*lxt) * (rhte->lxt_cnt - delta))); | 
|  | } else | 
|  | lxt = NULL; | 
|  | } else | 
|  | lxt = lxt_old; | 
|  |  | 
|  | /* Nothing can fail from now on */ | 
|  | my_new_size = rhte->lxt_cnt - delta; | 
|  |  | 
|  | /* | 
|  | * The following sequence is prescribed in the SISlite spec | 
|  | * for syncing up with the AFU when removing LXT entries. | 
|  | */ | 
|  | rhte->lxt_cnt = my_new_size; | 
|  | dma_wmb(); /* Make RHT entry's LXT table size update visible */ | 
|  |  | 
|  | rhte->lxt_start = lxt; | 
|  | dma_wmb(); /* Make RHT entry's LXT table update visible */ | 
|  |  | 
|  | if (needs_sync) { | 
|  | rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC); | 
|  | if (unlikely(rc)) | 
|  | rc = -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (needs_ws) { | 
|  | /* | 
|  | * Mark the context as unavailable, so that we can release | 
|  | * the mutex safely. | 
|  | */ | 
|  | ctxi->unavail = true; | 
|  | mutex_unlock(&ctxi->mutex); | 
|  | } | 
|  |  | 
|  | /* Free LBAs allocated to freed chunks */ | 
|  | mutex_lock(&blka->mutex); | 
|  | for (i = delta - 1; i >= 0; i--) { | 
|  | aun = lxt_old[my_new_size + i].rlba_base >> MC_CHUNK_SHIFT; | 
|  | if (needs_ws) | 
|  | write_same16(sdev, aun, MC_CHUNK_SIZE); | 
|  | ba_free(&blka->ba_lun, aun); | 
|  | } | 
|  | mutex_unlock(&blka->mutex); | 
|  |  | 
|  | if (needs_ws) { | 
|  | /* Make the context visible again */ | 
|  | mutex_lock(&ctxi->mutex); | 
|  | ctxi->unavail = false; | 
|  | } | 
|  |  | 
|  | /* Free old lxt if reallocated */ | 
|  | if (lxt != lxt_old) | 
|  | kfree(lxt_old); | 
|  | *new_size = my_new_size; | 
|  | out: | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _cxlflash_vlun_resize() - changes the size of a virtual LUN | 
|  | * @sdev:	SCSI device associated with LUN owning virtual LUN. | 
|  | * @ctxi:	Context owning resources. | 
|  | * @resize:	Resize ioctl data structure. | 
|  | * | 
|  | * On successful return, the user is informed of the new size (in blocks) | 
|  | * of the virtual LUN in last LBA format. When the size of the virtual | 
|  | * LUN is zero, the last LBA is reflected as -1. See comment in the | 
|  | * prologue for _cxlflash_disk_release() regarding AFU syncs and contexts | 
|  | * on the error recovery list. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | int _cxlflash_vlun_resize(struct scsi_device *sdev, | 
|  | struct ctx_info *ctxi, | 
|  | struct dk_cxlflash_resize *resize) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct llun_info *lli = sdev->hostdata; | 
|  | struct glun_info *gli = lli->parent; | 
|  | struct afu *afu = cfg->afu; | 
|  | bool put_ctx = false; | 
|  |  | 
|  | res_hndl_t rhndl = resize->rsrc_handle; | 
|  | u64 new_size; | 
|  | u64 nsectors; | 
|  | u64 ctxid = DECODE_CTXID(resize->context_id), | 
|  | rctxid = resize->context_id; | 
|  |  | 
|  | struct sisl_rht_entry *rhte; | 
|  |  | 
|  | int rc = 0; | 
|  |  | 
|  | /* | 
|  | * The requested size (req_size) is always assumed to be in 4k blocks, | 
|  | * so we have to convert it here from 4k to chunk size. | 
|  | */ | 
|  | nsectors = (resize->req_size * CXLFLASH_BLOCK_SIZE) / gli->blk_len; | 
|  | new_size = DIV_ROUND_UP(nsectors, MC_CHUNK_SIZE); | 
|  |  | 
|  | dev_dbg(dev, "%s: ctxid=%llu rhndl=%llu req_size=%llu new_size=%llu\n", | 
|  | __func__, ctxid, resize->rsrc_handle, resize->req_size, | 
|  | new_size); | 
|  |  | 
|  | if (unlikely(gli->mode != MODE_VIRTUAL)) { | 
|  | dev_dbg(dev, "%s: LUN mode does not support resize mode=%d\n", | 
|  | __func__, gli->mode); | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  |  | 
|  | } | 
|  |  | 
|  | if (!ctxi) { | 
|  | ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK); | 
|  | if (unlikely(!ctxi)) { | 
|  | dev_dbg(dev, "%s: Bad context ctxid=%llu\n", | 
|  | __func__, ctxid); | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | put_ctx = true; | 
|  | } | 
|  |  | 
|  | rhte = get_rhte(ctxi, rhndl, lli); | 
|  | if (unlikely(!rhte)) { | 
|  | dev_dbg(dev, "%s: Bad resource handle rhndl=%u\n", | 
|  | __func__, rhndl); | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (new_size > rhte->lxt_cnt) | 
|  | rc = grow_lxt(afu, sdev, ctxid, rhndl, rhte, &new_size); | 
|  | else if (new_size < rhte->lxt_cnt) | 
|  | rc = shrink_lxt(afu, sdev, rhndl, rhte, ctxi, &new_size); | 
|  | else { | 
|  | /* | 
|  | * Rare case where there is already sufficient space, just | 
|  | * need to perform a translation sync with the AFU. This | 
|  | * scenario likely follows a previous sync failure during | 
|  | * a resize operation. Accordingly, perform the heavyweight | 
|  | * form of translation sync as it is unknown which type of | 
|  | * resize failed previously. | 
|  | */ | 
|  | rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC); | 
|  | if (unlikely(rc)) { | 
|  | rc = -EAGAIN; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | resize->hdr.return_flags = 0; | 
|  | resize->last_lba = (new_size * MC_CHUNK_SIZE * gli->blk_len); | 
|  | resize->last_lba /= CXLFLASH_BLOCK_SIZE; | 
|  | resize->last_lba--; | 
|  |  | 
|  | out: | 
|  | if (put_ctx) | 
|  | put_context(ctxi); | 
|  | dev_dbg(dev, "%s: resized to %llu returning rc=%d\n", | 
|  | __func__, resize->last_lba, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int cxlflash_vlun_resize(struct scsi_device *sdev, | 
|  | struct dk_cxlflash_resize *resize) | 
|  | { | 
|  | return _cxlflash_vlun_resize(sdev, NULL, resize); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cxlflash_restore_luntable() - Restore LUN table to prior state | 
|  | * @cfg:	Internal structure associated with the host. | 
|  | */ | 
|  | void cxlflash_restore_luntable(struct cxlflash_cfg *cfg) | 
|  | { | 
|  | struct llun_info *lli, *temp; | 
|  | u32 lind; | 
|  | int k; | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | __be64 __iomem *fc_port_luns; | 
|  |  | 
|  | mutex_lock(&global.mutex); | 
|  |  | 
|  | list_for_each_entry_safe(lli, temp, &cfg->lluns, list) { | 
|  | if (!lli->in_table) | 
|  | continue; | 
|  |  | 
|  | lind = lli->lun_index; | 
|  | dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n", __func__, lind); | 
|  |  | 
|  | for (k = 0; k < cfg->num_fc_ports; k++) | 
|  | if (lli->port_sel & (1 << k)) { | 
|  | fc_port_luns = get_fc_port_luns(cfg, k); | 
|  | writeq_be(lli->lun_id[k], &fc_port_luns[lind]); | 
|  | dev_dbg(dev, "\t%d=%llx\n", k, lli->lun_id[k]); | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&global.mutex); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * get_num_ports() - compute number of ports from port selection mask | 
|  | * @psm:	Port selection mask. | 
|  | * | 
|  | * Return: Population count of port selection mask | 
|  | */ | 
|  | static inline u8 get_num_ports(u32 psm) | 
|  | { | 
|  | static const u8 bits[16] = { 0, 1, 1, 2, 1, 2, 2, 3, | 
|  | 1, 2, 2, 3, 2, 3, 3, 4 }; | 
|  |  | 
|  | return bits[psm & 0xf]; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * init_luntable() - write an entry in the LUN table | 
|  | * @cfg:	Internal structure associated with the host. | 
|  | * @lli:	Per adapter LUN information structure. | 
|  | * | 
|  | * On successful return, a LUN table entry is created: | 
|  | *	- at the top for LUNs visible on multiple ports. | 
|  | *	- at the bottom for LUNs visible only on one port. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int init_luntable(struct cxlflash_cfg *cfg, struct llun_info *lli) | 
|  | { | 
|  | u32 chan; | 
|  | u32 lind; | 
|  | u32 nports; | 
|  | int rc = 0; | 
|  | int k; | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | __be64 __iomem *fc_port_luns; | 
|  |  | 
|  | mutex_lock(&global.mutex); | 
|  |  | 
|  | if (lli->in_table) | 
|  | goto out; | 
|  |  | 
|  | nports = get_num_ports(lli->port_sel); | 
|  | if (nports == 0 || nports > cfg->num_fc_ports) { | 
|  | WARN(1, "Unsupported port configuration nports=%u", nports); | 
|  | rc = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (nports > 1) { | 
|  | /* | 
|  | * When LUN is visible from multiple ports, we will put | 
|  | * it in the top half of the LUN table. | 
|  | */ | 
|  | for (k = 0; k < cfg->num_fc_ports; k++) { | 
|  | if (!(lli->port_sel & (1 << k))) | 
|  | continue; | 
|  |  | 
|  | if (cfg->promote_lun_index == cfg->last_lun_index[k]) { | 
|  | rc = -ENOSPC; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | lind = lli->lun_index = cfg->promote_lun_index; | 
|  | dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n", __func__, lind); | 
|  |  | 
|  | for (k = 0; k < cfg->num_fc_ports; k++) { | 
|  | if (!(lli->port_sel & (1 << k))) | 
|  | continue; | 
|  |  | 
|  | fc_port_luns = get_fc_port_luns(cfg, k); | 
|  | writeq_be(lli->lun_id[k], &fc_port_luns[lind]); | 
|  | dev_dbg(dev, "\t%d=%llx\n", k, lli->lun_id[k]); | 
|  | } | 
|  |  | 
|  | cfg->promote_lun_index++; | 
|  | } else { | 
|  | /* | 
|  | * When LUN is visible only from one port, we will put | 
|  | * it in the bottom half of the LUN table. | 
|  | */ | 
|  | chan = PORTMASK2CHAN(lli->port_sel); | 
|  | if (cfg->promote_lun_index == cfg->last_lun_index[chan]) { | 
|  | rc = -ENOSPC; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | lind = lli->lun_index = cfg->last_lun_index[chan]; | 
|  | fc_port_luns = get_fc_port_luns(cfg, chan); | 
|  | writeq_be(lli->lun_id[chan], &fc_port_luns[lind]); | 
|  | cfg->last_lun_index[chan]--; | 
|  | dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n\t%d=%llx\n", | 
|  | __func__, lind, chan, lli->lun_id[chan]); | 
|  | } | 
|  |  | 
|  | lli->in_table = true; | 
|  | out: | 
|  | mutex_unlock(&global.mutex); | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cxlflash_disk_virtual_open() - open a virtual disk of specified size | 
|  | * @sdev:	SCSI device associated with LUN owning virtual LUN. | 
|  | * @arg:	UVirtual ioctl data structure. | 
|  | * | 
|  | * On successful return, the user is informed of the resource handle | 
|  | * to be used to identify the virtual LUN and the size (in blocks) of | 
|  | * the virtual LUN in last LBA format. When the size of the virtual LUN | 
|  | * is zero, the last LBA is reflected as -1. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct llun_info *lli = sdev->hostdata; | 
|  | struct glun_info *gli = lli->parent; | 
|  |  | 
|  | struct dk_cxlflash_uvirtual *virt = (struct dk_cxlflash_uvirtual *)arg; | 
|  | struct dk_cxlflash_resize resize; | 
|  |  | 
|  | u64 ctxid = DECODE_CTXID(virt->context_id), | 
|  | rctxid = virt->context_id; | 
|  | u64 lun_size = virt->lun_size; | 
|  | u64 last_lba = 0; | 
|  | u64 rsrc_handle = -1; | 
|  |  | 
|  | int rc = 0; | 
|  |  | 
|  | struct ctx_info *ctxi = NULL; | 
|  | struct sisl_rht_entry *rhte = NULL; | 
|  |  | 
|  | dev_dbg(dev, "%s: ctxid=%llu ls=%llu\n", __func__, ctxid, lun_size); | 
|  |  | 
|  | /* Setup the LUNs block allocator on first call */ | 
|  | mutex_lock(&gli->mutex); | 
|  | if (gli->mode == MODE_NONE) { | 
|  | rc = init_vlun(lli); | 
|  | if (rc) { | 
|  | dev_err(dev, "%s: init_vlun failed rc=%d\n", | 
|  | __func__, rc); | 
|  | rc = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  | } | 
|  |  | 
|  | rc = cxlflash_lun_attach(gli, MODE_VIRTUAL, true); | 
|  | if (unlikely(rc)) { | 
|  | dev_err(dev, "%s: Failed attach to LUN (VIRTUAL)\n", __func__); | 
|  | goto err0; | 
|  | } | 
|  | mutex_unlock(&gli->mutex); | 
|  |  | 
|  | rc = init_luntable(cfg, lli); | 
|  | if (rc) { | 
|  | dev_err(dev, "%s: init_luntable failed rc=%d\n", __func__, rc); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | ctxi = get_context(cfg, rctxid, lli, 0); | 
|  | if (unlikely(!ctxi)) { | 
|  | dev_err(dev, "%s: Bad context ctxid=%llu\n", __func__, ctxid); | 
|  | rc = -EINVAL; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | rhte = rhte_checkout(ctxi, lli); | 
|  | if (unlikely(!rhte)) { | 
|  | dev_err(dev, "%s: too many opens ctxid=%llu\n", | 
|  | __func__, ctxid); | 
|  | rc = -EMFILE;	/* too many opens  */ | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | rsrc_handle = (rhte - ctxi->rht_start); | 
|  |  | 
|  | /* Populate RHT format 0 */ | 
|  | rhte->nmask = MC_RHT_NMASK; | 
|  | rhte->fp = SISL_RHT_FP(0U, ctxi->rht_perms); | 
|  |  | 
|  | /* Resize even if requested size is 0 */ | 
|  | marshal_virt_to_resize(virt, &resize); | 
|  | resize.rsrc_handle = rsrc_handle; | 
|  | rc = _cxlflash_vlun_resize(sdev, ctxi, &resize); | 
|  | if (rc) { | 
|  | dev_err(dev, "%s: resize failed rc=%d\n", __func__, rc); | 
|  | goto err2; | 
|  | } | 
|  | last_lba = resize.last_lba; | 
|  |  | 
|  | if (virt->hdr.flags & DK_CXLFLASH_UVIRTUAL_NEED_WRITE_SAME) | 
|  | ctxi->rht_needs_ws[rsrc_handle] = true; | 
|  |  | 
|  | virt->hdr.return_flags = 0; | 
|  | virt->last_lba = last_lba; | 
|  | virt->rsrc_handle = rsrc_handle; | 
|  |  | 
|  | if (get_num_ports(lli->port_sel) > 1) | 
|  | virt->hdr.return_flags |= DK_CXLFLASH_ALL_PORTS_ACTIVE; | 
|  | out: | 
|  | if (likely(ctxi)) | 
|  | put_context(ctxi); | 
|  | dev_dbg(dev, "%s: returning handle=%llu rc=%d llba=%llu\n", | 
|  | __func__, rsrc_handle, rc, last_lba); | 
|  | return rc; | 
|  |  | 
|  | err2: | 
|  | rhte_checkin(ctxi, rhte); | 
|  | err1: | 
|  | cxlflash_lun_detach(gli); | 
|  | goto out; | 
|  | err0: | 
|  | /* Special common cleanup prior to successful LUN attach */ | 
|  | cxlflash_ba_terminate(&gli->blka.ba_lun); | 
|  | mutex_unlock(&gli->mutex); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * clone_lxt() - copies translation tables from source to destination RHTE | 
|  | * @afu:	AFU associated with the host. | 
|  | * @blka:	Block allocator associated with LUN. | 
|  | * @ctxid:	Context ID of context owning the RHTE. | 
|  | * @rhndl:	Resource handle associated with the RHTE. | 
|  | * @rhte:	Destination resource handle entry (RHTE). | 
|  | * @rhte_src:	Source resource handle entry (RHTE). | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | static int clone_lxt(struct afu *afu, | 
|  | struct blka *blka, | 
|  | ctx_hndl_t ctxid, | 
|  | res_hndl_t rhndl, | 
|  | struct sisl_rht_entry *rhte, | 
|  | struct sisl_rht_entry *rhte_src) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = afu->parent; | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct sisl_lxt_entry *lxt = NULL; | 
|  | bool locked = false; | 
|  | u32 ngrps; | 
|  | u64 aun;		/* chunk# allocated by block allocator */ | 
|  | int j; | 
|  | int i = 0; | 
|  | int rc = 0; | 
|  |  | 
|  | ngrps = LXT_NUM_GROUPS(rhte_src->lxt_cnt); | 
|  |  | 
|  | if (ngrps) { | 
|  | /* allocate new LXTs for clone */ | 
|  | lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!lxt)) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* copy over */ | 
|  | memcpy(lxt, rhte_src->lxt_start, | 
|  | (sizeof(*lxt) * rhte_src->lxt_cnt)); | 
|  |  | 
|  | /* clone the LBAs in block allocator via ref_cnt, note that the | 
|  | * block allocator mutex must be held until it is established | 
|  | * that this routine will complete without the need for a | 
|  | * cleanup. | 
|  | */ | 
|  | mutex_lock(&blka->mutex); | 
|  | locked = true; | 
|  | for (i = 0; i < rhte_src->lxt_cnt; i++) { | 
|  | aun = (lxt[i].rlba_base >> MC_CHUNK_SHIFT); | 
|  | if (ba_clone(&blka->ba_lun, aun) == -1ULL) { | 
|  | rc = -EIO; | 
|  | goto err; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The following sequence is prescribed in the SISlite spec | 
|  | * for syncing up with the AFU when adding LXT entries. | 
|  | */ | 
|  | dma_wmb(); /* Make LXT updates are visible */ | 
|  |  | 
|  | rhte->lxt_start = lxt; | 
|  | dma_wmb(); /* Make RHT entry's LXT table update visible */ | 
|  |  | 
|  | rhte->lxt_cnt = rhte_src->lxt_cnt; | 
|  | dma_wmb(); /* Make RHT entry's LXT table size update visible */ | 
|  |  | 
|  | rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_LW_SYNC); | 
|  | if (unlikely(rc)) { | 
|  | rc = -EAGAIN; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (locked) | 
|  | mutex_unlock(&blka->mutex); | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  | err2: | 
|  | /* Reset the RHTE */ | 
|  | rhte->lxt_cnt = 0; | 
|  | dma_wmb(); | 
|  | rhte->lxt_start = NULL; | 
|  | dma_wmb(); | 
|  | err: | 
|  | /* free the clones already made */ | 
|  | for (j = 0; j < i; j++) { | 
|  | aun = (lxt[j].rlba_base >> MC_CHUNK_SHIFT); | 
|  | ba_free(&blka->ba_lun, aun); | 
|  | } | 
|  | kfree(lxt); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cxlflash_disk_clone() - clone a context by making snapshot of another | 
|  | * @sdev:	SCSI device associated with LUN owning virtual LUN. | 
|  | * @clone:	Clone ioctl data structure. | 
|  | * | 
|  | * This routine effectively performs cxlflash_disk_open operation for each | 
|  | * in-use virtual resource in the source context. Note that the destination | 
|  | * context must be in pristine state and cannot have any resource handles | 
|  | * open at the time of the clone. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | int cxlflash_disk_clone(struct scsi_device *sdev, | 
|  | struct dk_cxlflash_clone *clone) | 
|  | { | 
|  | struct cxlflash_cfg *cfg = shost_priv(sdev->host); | 
|  | struct device *dev = &cfg->dev->dev; | 
|  | struct llun_info *lli = sdev->hostdata; | 
|  | struct glun_info *gli = lli->parent; | 
|  | struct blka *blka = &gli->blka; | 
|  | struct afu *afu = cfg->afu; | 
|  | struct dk_cxlflash_release release = { { 0 }, 0 }; | 
|  |  | 
|  | struct ctx_info *ctxi_src = NULL, | 
|  | *ctxi_dst = NULL; | 
|  | struct lun_access *lun_access_src, *lun_access_dst; | 
|  | u32 perms; | 
|  | u64 ctxid_src = DECODE_CTXID(clone->context_id_src), | 
|  | ctxid_dst = DECODE_CTXID(clone->context_id_dst), | 
|  | rctxid_src = clone->context_id_src, | 
|  | rctxid_dst = clone->context_id_dst; | 
|  | int i, j; | 
|  | int rc = 0; | 
|  | bool found; | 
|  | LIST_HEAD(sidecar); | 
|  |  | 
|  | dev_dbg(dev, "%s: ctxid_src=%llu ctxid_dst=%llu\n", | 
|  | __func__, ctxid_src, ctxid_dst); | 
|  |  | 
|  | /* Do not clone yourself */ | 
|  | if (unlikely(rctxid_src == rctxid_dst)) { | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (unlikely(gli->mode != MODE_VIRTUAL)) { | 
|  | rc = -EINVAL; | 
|  | dev_dbg(dev, "%s: Only supported on virtual LUNs mode=%u\n", | 
|  | __func__, gli->mode); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ctxi_src = get_context(cfg, rctxid_src, lli, CTX_CTRL_CLONE); | 
|  | ctxi_dst = get_context(cfg, rctxid_dst, lli, 0); | 
|  | if (unlikely(!ctxi_src || !ctxi_dst)) { | 
|  | dev_dbg(dev, "%s: Bad context ctxid_src=%llu ctxid_dst=%llu\n", | 
|  | __func__, ctxid_src, ctxid_dst); | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Verify there is no open resource handle in the destination context */ | 
|  | for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) | 
|  | if (ctxi_dst->rht_start[i].nmask != 0) { | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Clone LUN access list */ | 
|  | list_for_each_entry(lun_access_src, &ctxi_src->luns, list) { | 
|  | found = false; | 
|  | list_for_each_entry(lun_access_dst, &ctxi_dst->luns, list) | 
|  | if (lun_access_dst->sdev == lun_access_src->sdev) { | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | lun_access_dst = kzalloc(sizeof(*lun_access_dst), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!lun_access_dst)) { | 
|  | dev_err(dev, "%s: lun_access allocation fail\n", | 
|  | __func__); | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | *lun_access_dst = *lun_access_src; | 
|  | list_add(&lun_access_dst->list, &sidecar); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (unlikely(!ctxi_src->rht_out)) { | 
|  | dev_dbg(dev, "%s: Nothing to clone\n", __func__); | 
|  | goto out_success; | 
|  | } | 
|  |  | 
|  | /* User specified permission on attach */ | 
|  | perms = ctxi_dst->rht_perms; | 
|  |  | 
|  | /* | 
|  | * Copy over checked-out RHT (and their associated LXT) entries by | 
|  | * hand, stopping after we've copied all outstanding entries and | 
|  | * cleaning up if the clone fails. | 
|  | * | 
|  | * Note: This loop is equivalent to performing cxlflash_disk_open and | 
|  | * cxlflash_vlun_resize. As such, LUN accounting needs to be taken into | 
|  | * account by attaching after each successful RHT entry clone. In the | 
|  | * event that a clone failure is experienced, the LUN detach is handled | 
|  | * via the cleanup performed by _cxlflash_disk_release. | 
|  | */ | 
|  | for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) { | 
|  | if (ctxi_src->rht_out == ctxi_dst->rht_out) | 
|  | break; | 
|  | if (ctxi_src->rht_start[i].nmask == 0) | 
|  | continue; | 
|  |  | 
|  | /* Consume a destination RHT entry */ | 
|  | ctxi_dst->rht_out++; | 
|  | ctxi_dst->rht_start[i].nmask = ctxi_src->rht_start[i].nmask; | 
|  | ctxi_dst->rht_start[i].fp = | 
|  | SISL_RHT_FP_CLONE(ctxi_src->rht_start[i].fp, perms); | 
|  | ctxi_dst->rht_lun[i] = ctxi_src->rht_lun[i]; | 
|  |  | 
|  | rc = clone_lxt(afu, blka, ctxid_dst, i, | 
|  | &ctxi_dst->rht_start[i], | 
|  | &ctxi_src->rht_start[i]); | 
|  | if (rc) { | 
|  | marshal_clone_to_rele(clone, &release); | 
|  | for (j = 0; j < i; j++) { | 
|  | release.rsrc_handle = j; | 
|  | _cxlflash_disk_release(sdev, ctxi_dst, | 
|  | &release); | 
|  | } | 
|  |  | 
|  | /* Put back the one we failed on */ | 
|  | rhte_checkin(ctxi_dst, &ctxi_dst->rht_start[i]); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | cxlflash_lun_attach(gli, gli->mode, false); | 
|  | } | 
|  |  | 
|  | out_success: | 
|  | list_splice(&sidecar, &ctxi_dst->luns); | 
|  |  | 
|  | /* fall through */ | 
|  | out: | 
|  | if (ctxi_src) | 
|  | put_context(ctxi_src); | 
|  | if (ctxi_dst) | 
|  | put_context(ctxi_dst); | 
|  | dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); | 
|  | return rc; | 
|  |  | 
|  | err: | 
|  | list_for_each_entry_safe(lun_access_src, lun_access_dst, &sidecar, list) | 
|  | kfree(lun_access_src); | 
|  | goto out; | 
|  | } |