|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Freescale QUICC Engine USB Host Controller Driver | 
|  | * | 
|  | * Copyright (c) Freescale Semicondutor, Inc. 2006. | 
|  | *               Shlomi Gridish <gridish@freescale.com> | 
|  | *               Jerry Huang <Chang-Ming.Huang@freescale.com> | 
|  | * Copyright (c) Logic Product Development, Inc. 2007 | 
|  | *               Peter Barada <peterb@logicpd.com> | 
|  | * Copyright (c) MontaVista Software, Inc. 2008. | 
|  | *               Anton Vorontsov <avorontsov@ru.mvista.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/hcd.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/slab.h> | 
|  | #include <soc/fsl/qe/qe.h> | 
|  | #include <asm/fsl_gtm.h> | 
|  | #include "fhci.h" | 
|  |  | 
|  | void fhci_start_sof_timer(struct fhci_hcd *fhci) | 
|  | { | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | /* clear frame_n */ | 
|  | out_be16(&fhci->pram->frame_num, 0); | 
|  |  | 
|  | out_be16(&fhci->regs->usb_ussft, 0); | 
|  | setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | void fhci_stop_sof_timer(struct fhci_hcd *fhci) | 
|  | { | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | clrbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); | 
|  | gtm_stop_timer16(fhci->timer); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | u16 fhci_get_sof_timer_count(struct fhci_usb *usb) | 
|  | { | 
|  | return be16_to_cpu(in_be16(&usb->fhci->regs->usb_ussft) / 12); | 
|  | } | 
|  |  | 
|  | /* initialize the endpoint zero */ | 
|  | static u32 endpoint_zero_init(struct fhci_usb *usb, | 
|  | enum fhci_mem_alloc data_mem, | 
|  | u32 ring_len) | 
|  | { | 
|  | u32 rc; | 
|  |  | 
|  | rc = fhci_create_ep(usb, data_mem, ring_len); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | /* inilialize endpoint registers */ | 
|  | fhci_init_ep_registers(usb, usb->ep0, data_mem); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* enable the USB interrupts */ | 
|  | void fhci_usb_enable_interrupt(struct fhci_usb *usb) | 
|  | { | 
|  | struct fhci_hcd *fhci = usb->fhci; | 
|  |  | 
|  | if (usb->intr_nesting_cnt == 1) { | 
|  | /* initialize the USB interrupt */ | 
|  | enable_irq(fhci_to_hcd(fhci)->irq); | 
|  |  | 
|  | /* initialize the event register and mask register */ | 
|  | out_be16(&usb->fhci->regs->usb_usber, 0xffff); | 
|  | out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); | 
|  |  | 
|  | /* enable the timer interrupts */ | 
|  | enable_irq(fhci->timer->irq); | 
|  | } else if (usb->intr_nesting_cnt > 1) | 
|  | fhci_info(fhci, "unbalanced USB interrupts nesting\n"); | 
|  | usb->intr_nesting_cnt--; | 
|  | } | 
|  |  | 
|  | /* disable the usb interrupt */ | 
|  | void fhci_usb_disable_interrupt(struct fhci_usb *usb) | 
|  | { | 
|  | struct fhci_hcd *fhci = usb->fhci; | 
|  |  | 
|  | if (usb->intr_nesting_cnt == 0) { | 
|  | /* disable the timer interrupt */ | 
|  | disable_irq_nosync(fhci->timer->irq); | 
|  |  | 
|  | /* disable the usb interrupt */ | 
|  | disable_irq_nosync(fhci_to_hcd(fhci)->irq); | 
|  | out_be16(&usb->fhci->regs->usb_usbmr, 0); | 
|  | } | 
|  | usb->intr_nesting_cnt++; | 
|  | } | 
|  |  | 
|  | /* enable the USB controller */ | 
|  | static u32 fhci_usb_enable(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct fhci_usb *usb = fhci->usb_lld; | 
|  |  | 
|  | out_be16(&usb->fhci->regs->usb_usber, 0xffff); | 
|  | out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); | 
|  | setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); | 
|  |  | 
|  | mdelay(100); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* disable the USB controller */ | 
|  | static u32 fhci_usb_disable(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct fhci_usb *usb = fhci->usb_lld; | 
|  |  | 
|  | fhci_usb_disable_interrupt(usb); | 
|  | fhci_port_disable(fhci); | 
|  |  | 
|  | /* disable the usb controller */ | 
|  | if (usb->port_status == FHCI_PORT_FULL || | 
|  | usb->port_status == FHCI_PORT_LOW) | 
|  | fhci_device_disconnected_interrupt(fhci); | 
|  |  | 
|  | clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* check the bus state by polling the QE bit on the IO ports */ | 
|  | int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) | 
|  | { | 
|  | u8 bits = 0; | 
|  |  | 
|  | /* check USBOE,if transmitting,exit */ | 
|  | if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) | 
|  | return -1; | 
|  |  | 
|  | /* check USBRP */ | 
|  | if (gpio_get_value(fhci->gpios[GPIO_USBRP])) | 
|  | bits |= 0x2; | 
|  |  | 
|  | /* check USBRN */ | 
|  | if (gpio_get_value(fhci->gpios[GPIO_USBRN])) | 
|  | bits |= 0x1; | 
|  |  | 
|  | return bits; | 
|  | } | 
|  |  | 
|  | static void fhci_mem_free(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct ed *ed; | 
|  | struct ed *next_ed; | 
|  | struct td *td; | 
|  | struct td *next_td; | 
|  |  | 
|  | list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { | 
|  | list_del(&ed->node); | 
|  | kfree(ed); | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { | 
|  | list_del(&td->node); | 
|  | kfree(td); | 
|  | } | 
|  |  | 
|  | kfree(fhci->vroot_hub); | 
|  | fhci->vroot_hub = NULL; | 
|  |  | 
|  | kfree(fhci->hc_list); | 
|  | fhci->hc_list = NULL; | 
|  | } | 
|  |  | 
|  | static int fhci_mem_init(struct fhci_hcd *fhci) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); | 
|  | if (!fhci->hc_list) | 
|  | goto err; | 
|  |  | 
|  | INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); | 
|  | INIT_LIST_HEAD(&fhci->hc_list->bulk_list); | 
|  | INIT_LIST_HEAD(&fhci->hc_list->iso_list); | 
|  | INIT_LIST_HEAD(&fhci->hc_list->intr_list); | 
|  | INIT_LIST_HEAD(&fhci->hc_list->done_list); | 
|  |  | 
|  | fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); | 
|  | if (!fhci->vroot_hub) | 
|  | goto err; | 
|  |  | 
|  | INIT_LIST_HEAD(&fhci->empty_eds); | 
|  | INIT_LIST_HEAD(&fhci->empty_tds); | 
|  |  | 
|  | /* initialize work queue to handle done list */ | 
|  | fhci_tasklet.data = (unsigned long)fhci; | 
|  | fhci->process_done_task = &fhci_tasklet; | 
|  |  | 
|  | for (i = 0; i < MAX_TDS; i++) { | 
|  | struct td *td; | 
|  |  | 
|  | td = kmalloc(sizeof(*td), GFP_KERNEL); | 
|  | if (!td) | 
|  | goto err; | 
|  | fhci_recycle_empty_td(fhci, td); | 
|  | } | 
|  | for (i = 0; i < MAX_EDS; i++) { | 
|  | struct ed *ed; | 
|  |  | 
|  | ed = kmalloc(sizeof(*ed), GFP_KERNEL); | 
|  | if (!ed) | 
|  | goto err; | 
|  | fhci_recycle_empty_ed(fhci, ed); | 
|  | } | 
|  |  | 
|  | fhci->active_urbs = 0; | 
|  | return 0; | 
|  | err: | 
|  | fhci_mem_free(fhci); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* destroy the fhci_usb structure */ | 
|  | static void fhci_usb_free(void *lld) | 
|  | { | 
|  | struct fhci_usb *usb = lld; | 
|  | struct fhci_hcd *fhci; | 
|  |  | 
|  | if (usb) { | 
|  | fhci = usb->fhci; | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | 
|  | fhci_ep0_free(usb); | 
|  | kfree(usb->actual_frame); | 
|  | kfree(usb); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* initialize the USB */ | 
|  | static int fhci_usb_init(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct fhci_usb *usb = fhci->usb_lld; | 
|  |  | 
|  | memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); | 
|  |  | 
|  | usb->port_status = FHCI_PORT_DISABLED; | 
|  | usb->max_frame_usage = FRAME_TIME_USAGE; | 
|  | usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; | 
|  |  | 
|  | usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); | 
|  | if (!usb->actual_frame) { | 
|  | fhci_usb_free(usb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&usb->actual_frame->tds_list); | 
|  |  | 
|  | /* initializing registers on chip, clear frame number */ | 
|  | out_be16(&fhci->pram->frame_num, 0); | 
|  |  | 
|  | /* clear rx state */ | 
|  | out_be32(&fhci->pram->rx_state, 0); | 
|  |  | 
|  | /* set mask register */ | 
|  | usb->saved_msk = (USB_E_TXB_MASK | | 
|  | USB_E_TXE1_MASK | | 
|  | USB_E_IDLE_MASK | | 
|  | USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); | 
|  |  | 
|  | out_8(&usb->fhci->regs->usb_usmod, USB_MODE_HOST | USB_MODE_EN); | 
|  |  | 
|  | /* clearing the mask register */ | 
|  | out_be16(&usb->fhci->regs->usb_usbmr, 0); | 
|  |  | 
|  | /* initialing the event register */ | 
|  | out_be16(&usb->fhci->regs->usb_usber, 0xffff); | 
|  |  | 
|  | if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { | 
|  | fhci_usb_free(usb); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* initialize the fhci_usb struct and the corresponding data staruct */ | 
|  | static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct fhci_usb *usb; | 
|  |  | 
|  | /* allocate memory for SCC data structure */ | 
|  | usb = kzalloc(sizeof(*usb), GFP_KERNEL); | 
|  | if (!usb) | 
|  | return NULL; | 
|  |  | 
|  | usb->fhci = fhci; | 
|  | usb->hc_list = fhci->hc_list; | 
|  | usb->vroot_hub = fhci->vroot_hub; | 
|  |  | 
|  | usb->transfer_confirm = fhci_transfer_confirm_callback; | 
|  |  | 
|  | return usb; | 
|  | } | 
|  |  | 
|  | static int fhci_start(struct usb_hcd *hcd) | 
|  | { | 
|  | int ret; | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  |  | 
|  | ret = fhci_mem_init(fhci); | 
|  | if (ret) { | 
|  | fhci_err(fhci, "failed to allocate memory\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | fhci->usb_lld = fhci_create_lld(fhci); | 
|  | if (!fhci->usb_lld) { | 
|  | fhci_err(fhci, "low level driver config failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = fhci_usb_init(fhci); | 
|  | if (ret) { | 
|  | fhci_err(fhci, "low level driver initialize failed\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&fhci->lock); | 
|  |  | 
|  | /* connect the virtual root hub */ | 
|  | fhci->vroot_hub->dev_num = 1;	/* this field may be needed to fix */ | 
|  | fhci->vroot_hub->hub.wHubStatus = 0; | 
|  | fhci->vroot_hub->hub.wHubChange = 0; | 
|  | fhci->vroot_hub->port.wPortStatus = 0; | 
|  | fhci->vroot_hub->port.wPortChange = 0; | 
|  |  | 
|  | hcd->state = HC_STATE_RUNNING; | 
|  |  | 
|  | /* | 
|  | * From here on, hub_wq concurrently accesses the root | 
|  | * hub; drivers will be talking to enumerated devices. | 
|  | * (On restart paths, hub_wq already knows about the root | 
|  | * hub and could find work as soon as we wrote FLAG_CF.) | 
|  | * | 
|  | * Before this point the HC was idle/ready.  After, hub_wq | 
|  | * and device drivers may start it running. | 
|  | */ | 
|  | fhci_usb_enable(fhci); | 
|  | return 0; | 
|  | err: | 
|  | fhci_mem_free(fhci); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void fhci_stop(struct usb_hcd *hcd) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  |  | 
|  | fhci_usb_disable_interrupt(fhci->usb_lld); | 
|  | fhci_usb_disable(fhci); | 
|  |  | 
|  | fhci_usb_free(fhci->usb_lld); | 
|  | fhci->usb_lld = NULL; | 
|  | fhci_mem_free(fhci); | 
|  | } | 
|  |  | 
|  | static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, | 
|  | gfp_t mem_flags) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | u32 pipe = urb->pipe; | 
|  | int ret; | 
|  | int i; | 
|  | int size = 0; | 
|  | struct urb_priv *urb_priv; | 
|  | unsigned long flags; | 
|  |  | 
|  | switch (usb_pipetype(pipe)) { | 
|  | case PIPE_CONTROL: | 
|  | /* 1 td fro setup,1 for ack */ | 
|  | size = 2; | 
|  | case PIPE_BULK: | 
|  | /* one td for every 4096 bytes(can be up to 8k) */ | 
|  | size += urb->transfer_buffer_length / 4096; | 
|  | /* ...add for any remaining bytes... */ | 
|  | if ((urb->transfer_buffer_length % 4096) != 0) | 
|  | size++; | 
|  | /* ..and maybe a zero length packet to wrap it up */ | 
|  | if (size == 0) | 
|  | size++; | 
|  | else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 | 
|  | && (urb->transfer_buffer_length | 
|  | % usb_maxpacket(urb->dev, pipe, | 
|  | usb_pipeout(pipe))) != 0) | 
|  | size++; | 
|  | break; | 
|  | case PIPE_ISOCHRONOUS: | 
|  | size = urb->number_of_packets; | 
|  | if (size <= 0) | 
|  | return -EINVAL; | 
|  | for (i = 0; i < urb->number_of_packets; i++) { | 
|  | urb->iso_frame_desc[i].actual_length = 0; | 
|  | urb->iso_frame_desc[i].status = (u32) (-EXDEV); | 
|  | } | 
|  | break; | 
|  | case PIPE_INTERRUPT: | 
|  | size = 1; | 
|  | } | 
|  |  | 
|  | /* allocate the private part of the URB */ | 
|  | urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); | 
|  | if (!urb_priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* allocate the private part of the URB */ | 
|  | urb_priv->tds = kcalloc(size, sizeof(*urb_priv->tds), mem_flags); | 
|  | if (!urb_priv->tds) { | 
|  | kfree(urb_priv); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&fhci->lock, flags); | 
|  |  | 
|  | ret = usb_hcd_link_urb_to_ep(hcd, urb); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | /* fill the private part of the URB */ | 
|  | urb_priv->num_of_tds = size; | 
|  |  | 
|  | urb->status = -EINPROGRESS; | 
|  | urb->actual_length = 0; | 
|  | urb->error_count = 0; | 
|  | urb->hcpriv = urb_priv; | 
|  |  | 
|  | fhci_queue_urb(fhci, urb); | 
|  | err: | 
|  | if (ret) { | 
|  | kfree(urb_priv->tds); | 
|  | kfree(urb_priv); | 
|  | } | 
|  | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* dequeue FHCI URB */ | 
|  | static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | struct fhci_usb *usb = fhci->usb_lld; | 
|  | int ret = -EINVAL; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!urb || !urb->dev || !urb->dev->bus) | 
|  | goto out; | 
|  |  | 
|  | spin_lock_irqsave(&fhci->lock, flags); | 
|  |  | 
|  | ret = usb_hcd_check_unlink_urb(hcd, urb, status); | 
|  | if (ret) | 
|  | goto out2; | 
|  |  | 
|  | if (usb->port_status != FHCI_PORT_DISABLED) { | 
|  | struct urb_priv *urb_priv; | 
|  |  | 
|  | /* | 
|  | * flag the urb's data for deletion in some upcoming | 
|  | * SF interrupt's delete list processing | 
|  | */ | 
|  | urb_priv = urb->hcpriv; | 
|  |  | 
|  | if (!urb_priv || (urb_priv->state == URB_DEL)) | 
|  | goto out2; | 
|  |  | 
|  | urb_priv->state = URB_DEL; | 
|  |  | 
|  | /* already pending? */ | 
|  | urb_priv->ed->state = FHCI_ED_URB_DEL; | 
|  | } else { | 
|  | fhci_urb_complete_free(fhci, urb); | 
|  | } | 
|  |  | 
|  | out2: | 
|  | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void fhci_endpoint_disable(struct usb_hcd *hcd, | 
|  | struct usb_host_endpoint *ep) | 
|  | { | 
|  | struct fhci_hcd *fhci; | 
|  | struct ed *ed; | 
|  | unsigned long flags; | 
|  |  | 
|  | fhci = hcd_to_fhci(hcd); | 
|  | spin_lock_irqsave(&fhci->lock, flags); | 
|  | ed = ep->hcpriv; | 
|  | if (ed) { | 
|  | while (ed->td_head != NULL) { | 
|  | struct td *td = fhci_remove_td_from_ed(ed); | 
|  | fhci_urb_complete_free(fhci, td->urb); | 
|  | } | 
|  | fhci_recycle_empty_ed(fhci, ed); | 
|  | ep->hcpriv = NULL; | 
|  | } | 
|  | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  | } | 
|  |  | 
|  | static int fhci_get_frame_number(struct usb_hcd *hcd) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  |  | 
|  | return get_frame_num(fhci); | 
|  | } | 
|  |  | 
|  | static const struct hc_driver fhci_driver = { | 
|  | .description = "fsl,usb-fhci", | 
|  | .product_desc = "FHCI HOST Controller", | 
|  | .hcd_priv_size = sizeof(struct fhci_hcd), | 
|  |  | 
|  | /* generic hardware linkage */ | 
|  | .irq = fhci_irq, | 
|  | .flags = HCD_USB11 | HCD_MEMORY, | 
|  |  | 
|  | /* basic lifecycle operation */ | 
|  | .start = fhci_start, | 
|  | .stop = fhci_stop, | 
|  |  | 
|  | /* managing i/o requests and associated device resources */ | 
|  | .urb_enqueue = fhci_urb_enqueue, | 
|  | .urb_dequeue = fhci_urb_dequeue, | 
|  | .endpoint_disable = fhci_endpoint_disable, | 
|  |  | 
|  | /* scheduling support */ | 
|  | .get_frame_number = fhci_get_frame_number, | 
|  |  | 
|  | /* root hub support */ | 
|  | .hub_status_data = fhci_hub_status_data, | 
|  | .hub_control = fhci_hub_control, | 
|  | }; | 
|  |  | 
|  | static int of_fhci_probe(struct platform_device *ofdev) | 
|  | { | 
|  | struct device *dev = &ofdev->dev; | 
|  | struct device_node *node = dev->of_node; | 
|  | struct usb_hcd *hcd; | 
|  | struct fhci_hcd *fhci; | 
|  | struct resource usb_regs; | 
|  | unsigned long pram_addr; | 
|  | unsigned int usb_irq; | 
|  | const char *sprop; | 
|  | const u32 *iprop; | 
|  | int size; | 
|  | int ret; | 
|  | int i; | 
|  | int j; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | sprop = of_get_property(node, "mode", NULL); | 
|  | if (sprop && strcmp(sprop, "host")) | 
|  | return -ENODEV; | 
|  |  | 
|  | hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev)); | 
|  | if (!hcd) { | 
|  | dev_err(dev, "could not create hcd\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | fhci = hcd_to_fhci(hcd); | 
|  | hcd->self.controller = dev; | 
|  | dev_set_drvdata(dev, hcd); | 
|  |  | 
|  | iprop = of_get_property(node, "hub-power-budget", &size); | 
|  | if (iprop && size == sizeof(*iprop)) | 
|  | hcd->power_budget = *iprop; | 
|  |  | 
|  | /* FHCI registers. */ | 
|  | ret = of_address_to_resource(node, 0, &usb_regs); | 
|  | if (ret) { | 
|  | dev_err(dev, "could not get regs\n"); | 
|  | goto err_regs; | 
|  | } | 
|  |  | 
|  | hcd->regs = ioremap(usb_regs.start, resource_size(&usb_regs)); | 
|  | if (!hcd->regs) { | 
|  | dev_err(dev, "could not ioremap regs\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_regs; | 
|  | } | 
|  | fhci->regs = hcd->regs; | 
|  |  | 
|  | /* Parameter RAM. */ | 
|  | iprop = of_get_property(node, "reg", &size); | 
|  | if (!iprop || size < sizeof(*iprop) * 4) { | 
|  | dev_err(dev, "can't get pram offset\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_pram; | 
|  | } | 
|  |  | 
|  | pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64); | 
|  | if (IS_ERR_VALUE(pram_addr)) { | 
|  | dev_err(dev, "failed to allocate usb pram\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_pram; | 
|  | } | 
|  |  | 
|  | qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB, | 
|  | QE_CR_PROTOCOL_UNSPECIFIED, pram_addr); | 
|  | fhci->pram = cpm_muram_addr(pram_addr); | 
|  |  | 
|  | /* GPIOs and pins */ | 
|  | for (i = 0; i < NUM_GPIOS; i++) { | 
|  | int gpio; | 
|  | enum of_gpio_flags flags; | 
|  |  | 
|  | gpio = of_get_gpio_flags(node, i, &flags); | 
|  | fhci->gpios[i] = gpio; | 
|  | fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; | 
|  |  | 
|  | if (!gpio_is_valid(gpio)) { | 
|  | if (i < GPIO_SPEED) { | 
|  | dev_err(dev, "incorrect GPIO%d: %d\n", | 
|  | i, gpio); | 
|  | goto err_gpios; | 
|  | } else { | 
|  | dev_info(dev, "assuming board doesn't have " | 
|  | "%s gpio\n", i == GPIO_SPEED ? | 
|  | "speed" : "power"); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = gpio_request(gpio, dev_name(dev)); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to request gpio %d", i); | 
|  | goto err_gpios; | 
|  | } | 
|  |  | 
|  | if (i >= GPIO_SPEED) { | 
|  | ret = gpio_direction_output(gpio, 0); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to set gpio %d as " | 
|  | "an output\n", i); | 
|  | i++; | 
|  | goto err_gpios; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for (j = 0; j < NUM_PINS; j++) { | 
|  | fhci->pins[j] = qe_pin_request(node, j); | 
|  | if (IS_ERR(fhci->pins[j])) { | 
|  | ret = PTR_ERR(fhci->pins[j]); | 
|  | dev_err(dev, "can't get pin %d: %d\n", j, ret); | 
|  | goto err_pins; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Frame limit timer and its interrupt. */ | 
|  | fhci->timer = gtm_get_timer16(); | 
|  | if (IS_ERR(fhci->timer)) { | 
|  | ret = PTR_ERR(fhci->timer); | 
|  | dev_err(dev, "failed to request qe timer: %i", ret); | 
|  | goto err_get_timer; | 
|  | } | 
|  |  | 
|  | ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, | 
|  | 0, "qe timer (usb)", hcd); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to request timer irq"); | 
|  | goto err_timer_irq; | 
|  | } | 
|  |  | 
|  | /* USB Host interrupt. */ | 
|  | usb_irq = irq_of_parse_and_map(node, 0); | 
|  | if (usb_irq == NO_IRQ) { | 
|  | dev_err(dev, "could not get usb irq\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_usb_irq; | 
|  | } | 
|  |  | 
|  | /* Clocks. */ | 
|  | sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); | 
|  | if (sprop) { | 
|  | fhci->fullspeed_clk = qe_clock_source(sprop); | 
|  | if (fhci->fullspeed_clk == QE_CLK_DUMMY) { | 
|  | dev_err(dev, "wrong fullspeed-clock\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_clocks; | 
|  | } | 
|  | } | 
|  |  | 
|  | sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); | 
|  | if (sprop) { | 
|  | fhci->lowspeed_clk = qe_clock_source(sprop); | 
|  | if (fhci->lowspeed_clk == QE_CLK_DUMMY) { | 
|  | dev_err(dev, "wrong lowspeed-clock\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_clocks; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fhci->fullspeed_clk == QE_CLK_NONE && | 
|  | fhci->lowspeed_clk == QE_CLK_NONE) { | 
|  | dev_err(dev, "no clocks specified\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_clocks; | 
|  | } | 
|  |  | 
|  | dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); | 
|  |  | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | 
|  |  | 
|  | /* Start with full-speed, if possible. */ | 
|  | if (fhci->fullspeed_clk != QE_CLK_NONE) { | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_FULL); | 
|  | qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); | 
|  | } else { | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_LOW); | 
|  | qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); | 
|  | } | 
|  |  | 
|  | /* Clear and disable any pending interrupts. */ | 
|  | out_be16(&fhci->regs->usb_usber, 0xffff); | 
|  | out_be16(&fhci->regs->usb_usbmr, 0); | 
|  |  | 
|  | ret = usb_add_hcd(hcd, usb_irq, 0); | 
|  | if (ret < 0) | 
|  | goto err_add_hcd; | 
|  |  | 
|  | device_wakeup_enable(hcd->self.controller); | 
|  |  | 
|  | fhci_dfs_create(fhci); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_add_hcd: | 
|  | err_clocks: | 
|  | irq_dispose_mapping(usb_irq); | 
|  | err_usb_irq: | 
|  | free_irq(fhci->timer->irq, hcd); | 
|  | err_timer_irq: | 
|  | gtm_put_timer16(fhci->timer); | 
|  | err_get_timer: | 
|  | err_pins: | 
|  | while (--j >= 0) | 
|  | qe_pin_free(fhci->pins[j]); | 
|  | err_gpios: | 
|  | while (--i >= 0) { | 
|  | if (gpio_is_valid(fhci->gpios[i])) | 
|  | gpio_free(fhci->gpios[i]); | 
|  | } | 
|  | cpm_muram_free(pram_addr); | 
|  | err_pram: | 
|  | iounmap(hcd->regs); | 
|  | err_regs: | 
|  | usb_put_hcd(hcd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int fhci_remove(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | int i; | 
|  | int j; | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  | free_irq(fhci->timer->irq, hcd); | 
|  | gtm_put_timer16(fhci->timer); | 
|  | cpm_muram_free(cpm_muram_offset(fhci->pram)); | 
|  | for (i = 0; i < NUM_GPIOS; i++) { | 
|  | if (!gpio_is_valid(fhci->gpios[i])) | 
|  | continue; | 
|  | gpio_free(fhci->gpios[i]); | 
|  | } | 
|  | for (j = 0; j < NUM_PINS; j++) | 
|  | qe_pin_free(fhci->pins[j]); | 
|  | fhci_dfs_destroy(fhci); | 
|  | usb_put_hcd(hcd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int of_fhci_remove(struct platform_device *ofdev) | 
|  | { | 
|  | return fhci_remove(&ofdev->dev); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id of_fhci_match[] = { | 
|  | { .compatible = "fsl,mpc8323-qe-usb", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, of_fhci_match); | 
|  |  | 
|  | static struct platform_driver of_fhci_driver = { | 
|  | .driver = { | 
|  | .name = "fsl,usb-fhci", | 
|  | .of_match_table = of_fhci_match, | 
|  | }, | 
|  | .probe		= of_fhci_probe, | 
|  | .remove		= of_fhci_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(of_fhci_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); | 
|  | MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, " | 
|  | "Jerry Huang <Chang-Ming.Huang@freescale.com>, " | 
|  | "Anton Vorontsov <avorontsov@ru.mvista.com>"); | 
|  | MODULE_LICENSE("GPL"); |