| /* | 
 |  * Copyright (c) 2015, Sony Mobile Communications AB. | 
 |  * Copyright (c) 2013, The Linux Foundation. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 and | 
 |  * only version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pinctrl/pinctrl.h> | 
 | #include <linux/pinctrl/pinmux.h> | 
 | #include <linux/pinctrl/pinconf.h> | 
 | #include <linux/pinctrl/pinconf-generic.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/of_irq.h> | 
 |  | 
 | #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> | 
 |  | 
 | #include "../core.h" | 
 | #include "../pinctrl-utils.h" | 
 |  | 
 | /* MPP registers */ | 
 | #define SSBI_REG_ADDR_MPP_BASE		0x50 | 
 | #define SSBI_REG_ADDR_MPP(n)		(SSBI_REG_ADDR_MPP_BASE + n) | 
 |  | 
 | /* MPP Type: type */ | 
 | #define PM8XXX_MPP_TYPE_D_INPUT         0 | 
 | #define PM8XXX_MPP_TYPE_D_OUTPUT        1 | 
 | #define PM8XXX_MPP_TYPE_D_BI_DIR        2 | 
 | #define PM8XXX_MPP_TYPE_A_INPUT         3 | 
 | #define PM8XXX_MPP_TYPE_A_OUTPUT        4 | 
 | #define PM8XXX_MPP_TYPE_SINK            5 | 
 | #define PM8XXX_MPP_TYPE_DTEST_SINK      6 | 
 | #define PM8XXX_MPP_TYPE_DTEST_OUTPUT    7 | 
 |  | 
 | /* Digital Input: control */ | 
 | #define PM8XXX_MPP_DIN_TO_INT           0 | 
 | #define PM8XXX_MPP_DIN_TO_DBUS1         1 | 
 | #define PM8XXX_MPP_DIN_TO_DBUS2         2 | 
 | #define PM8XXX_MPP_DIN_TO_DBUS3         3 | 
 |  | 
 | /* Digital Output: control */ | 
 | #define PM8XXX_MPP_DOUT_CTRL_LOW        0 | 
 | #define PM8XXX_MPP_DOUT_CTRL_HIGH       1 | 
 | #define PM8XXX_MPP_DOUT_CTRL_MPP        2 | 
 | #define PM8XXX_MPP_DOUT_CTRL_INV_MPP    3 | 
 |  | 
 | /* Bidirectional: control */ | 
 | #define PM8XXX_MPP_BI_PULLUP_1KOHM      0 | 
 | #define PM8XXX_MPP_BI_PULLUP_OPEN       1 | 
 | #define PM8XXX_MPP_BI_PULLUP_10KOHM     2 | 
 | #define PM8XXX_MPP_BI_PULLUP_30KOHM     3 | 
 |  | 
 | /* Analog Output: control */ | 
 | #define PM8XXX_MPP_AOUT_CTRL_DISABLE            0 | 
 | #define PM8XXX_MPP_AOUT_CTRL_ENABLE             1 | 
 | #define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN        2 | 
 | #define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN         3 | 
 |  | 
 | /* Current Sink: control */ | 
 | #define PM8XXX_MPP_CS_CTRL_DISABLE      0 | 
 | #define PM8XXX_MPP_CS_CTRL_ENABLE       1 | 
 | #define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN  2 | 
 | #define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN   3 | 
 |  | 
 | /* DTEST Current Sink: control */ | 
 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN1    0 | 
 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN2    1 | 
 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN3    2 | 
 | #define PM8XXX_MPP_DTEST_CS_CTRL_EN4    3 | 
 |  | 
 | /* DTEST Digital Output: control */ | 
 | #define PM8XXX_MPP_DTEST_DBUS1          0 | 
 | #define PM8XXX_MPP_DTEST_DBUS2          1 | 
 | #define PM8XXX_MPP_DTEST_DBUS3          2 | 
 | #define PM8XXX_MPP_DTEST_DBUS4          3 | 
 |  | 
 | /* custom pinconf parameters */ | 
 | #define PM8XXX_CONFIG_AMUX		(PIN_CONFIG_END + 1) | 
 | #define PM8XXX_CONFIG_DTEST_SELECTOR	(PIN_CONFIG_END + 2) | 
 | #define PM8XXX_CONFIG_ALEVEL		(PIN_CONFIG_END + 3) | 
 | #define PM8XXX_CONFIG_PAIRED		(PIN_CONFIG_END + 4) | 
 |  | 
 | /** | 
 |  * struct pm8xxx_pin_data - dynamic configuration for a pin | 
 |  * @reg:		address of the control register | 
 |  * @irq:		IRQ from the PMIC interrupt controller | 
 |  * @mode:		operating mode for the pin (digital, analog or current sink) | 
 |  * @input:		pin is input | 
 |  * @output:		pin is output | 
 |  * @high_z:		pin is floating | 
 |  * @paired:		mpp operates in paired mode | 
 |  * @output_value:	logical output value of the mpp | 
 |  * @power_source:	selected power source | 
 |  * @dtest:		DTEST route selector | 
 |  * @amux:		input muxing in analog mode | 
 |  * @aout_level:		selector of the output in analog mode | 
 |  * @drive_strength:	drive strength of the current sink | 
 |  * @pullup:		pull up value, when in digital bidirectional mode | 
 |  */ | 
 | struct pm8xxx_pin_data { | 
 | 	unsigned reg; | 
 | 	int irq; | 
 |  | 
 | 	u8 mode; | 
 |  | 
 | 	bool input; | 
 | 	bool output; | 
 | 	bool high_z; | 
 | 	bool paired; | 
 | 	bool output_value; | 
 |  | 
 | 	u8 power_source; | 
 | 	u8 dtest; | 
 | 	u8 amux; | 
 | 	u8 aout_level; | 
 | 	u8 drive_strength; | 
 | 	unsigned pullup; | 
 | }; | 
 |  | 
 | struct pm8xxx_mpp { | 
 | 	struct device *dev; | 
 | 	struct regmap *regmap; | 
 | 	struct pinctrl_dev *pctrl; | 
 | 	struct gpio_chip chip; | 
 |  | 
 | 	struct pinctrl_desc desc; | 
 | 	unsigned npins; | 
 | }; | 
 |  | 
 | static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = { | 
 | 	{"qcom,amux-route",	PM8XXX_CONFIG_AMUX,		0}, | 
 | 	{"qcom,analog-level",	PM8XXX_CONFIG_ALEVEL,		0}, | 
 | 	{"qcom,dtest",		PM8XXX_CONFIG_DTEST_SELECTOR,	0}, | 
 | 	{"qcom,paired",		PM8XXX_CONFIG_PAIRED,		0}, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | static const struct pin_config_item pm8xxx_conf_items[] = { | 
 | 	PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true), | 
 | 	PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true), | 
 | 	PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true), | 
 | 	PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false), | 
 | }; | 
 | #endif | 
 |  | 
 | #define PM8XXX_MAX_MPPS	12 | 
 | static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = { | 
 | 	"mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", | 
 | 	"mpp9", "mpp10", "mpp11", "mpp12", | 
 | }; | 
 |  | 
 | #define PM8XXX_MPP_DIGITAL	0 | 
 | #define PM8XXX_MPP_ANALOG	1 | 
 | #define PM8XXX_MPP_SINK		2 | 
 |  | 
 | static const char * const pm8xxx_mpp_functions[] = { | 
 | 	"digital", "analog", "sink", | 
 | }; | 
 |  | 
 | static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl, | 
 | 			     struct pm8xxx_pin_data *pin) | 
 | { | 
 | 	unsigned level; | 
 | 	unsigned ctrl; | 
 | 	unsigned type; | 
 | 	int ret; | 
 | 	u8 val; | 
 |  | 
 | 	switch (pin->mode) { | 
 | 	case PM8XXX_MPP_DIGITAL: | 
 | 		if (pin->dtest) { | 
 | 			type = PM8XXX_MPP_TYPE_DTEST_OUTPUT; | 
 | 			ctrl = pin->dtest - 1; | 
 | 		} else if (pin->input && pin->output) { | 
 | 			type = PM8XXX_MPP_TYPE_D_BI_DIR; | 
 | 			if (pin->high_z) | 
 | 				ctrl = PM8XXX_MPP_BI_PULLUP_OPEN; | 
 | 			else if (pin->pullup == 600) | 
 | 				ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM; | 
 | 			else if (pin->pullup == 10000) | 
 | 				ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM; | 
 | 			else | 
 | 				ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM; | 
 | 		} else if (pin->input) { | 
 | 			type = PM8XXX_MPP_TYPE_D_INPUT; | 
 | 			if (pin->dtest) | 
 | 				ctrl = pin->dtest; | 
 | 			else | 
 | 				ctrl = PM8XXX_MPP_DIN_TO_INT; | 
 | 		} else { | 
 | 			type = PM8XXX_MPP_TYPE_D_OUTPUT; | 
 | 			ctrl = !!pin->output_value; | 
 | 			if (pin->paired) | 
 | 				ctrl |= BIT(1); | 
 | 		} | 
 |  | 
 | 		level = pin->power_source; | 
 | 		break; | 
 | 	case PM8XXX_MPP_ANALOG: | 
 | 		if (pin->output) { | 
 | 			type = PM8XXX_MPP_TYPE_A_OUTPUT; | 
 | 			level = pin->aout_level; | 
 | 			ctrl = pin->output_value; | 
 | 			if (pin->paired) | 
 | 				ctrl |= BIT(1); | 
 | 		} else { | 
 | 			type = PM8XXX_MPP_TYPE_A_INPUT; | 
 | 			level = pin->amux; | 
 | 			ctrl = 0; | 
 | 		} | 
 | 		break; | 
 | 	case PM8XXX_MPP_SINK: | 
 | 		level = (pin->drive_strength / 5) - 1; | 
 | 		if (pin->dtest) { | 
 | 			type = PM8XXX_MPP_TYPE_DTEST_SINK; | 
 | 			ctrl = pin->dtest - 1; | 
 | 		} else { | 
 | 			type = PM8XXX_MPP_TYPE_SINK; | 
 | 			ctrl = pin->output_value; | 
 | 			if (pin->paired) | 
 | 				ctrl |= BIT(1); | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	val = type << 5 | level << 2 | ctrl; | 
 | 	ret = regmap_write(pctrl->regmap, pin->reg, val); | 
 | 	if (ret) | 
 | 		dev_err(pctrl->dev, "failed to write register\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	return pctrl->npins; | 
 | } | 
 |  | 
 | static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev, | 
 | 					 unsigned group) | 
 | { | 
 | 	return pm8xxx_groups[group]; | 
 | } | 
 |  | 
 |  | 
 | static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev, | 
 | 				 unsigned group, | 
 | 				 const unsigned **pins, | 
 | 				 unsigned *num_pins) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	*pins = &pctrl->desc.pins[group].number; | 
 | 	*num_pins = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct pinctrl_ops pm8xxx_pinctrl_ops = { | 
 | 	.get_groups_count	= pm8xxx_get_groups_count, | 
 | 	.get_group_name		= pm8xxx_get_group_name, | 
 | 	.get_group_pins         = pm8xxx_get_group_pins, | 
 | 	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group, | 
 | 	.dt_free_map		= pinctrl_utils_free_map, | 
 | }; | 
 |  | 
 | static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) | 
 | { | 
 | 	return ARRAY_SIZE(pm8xxx_mpp_functions); | 
 | } | 
 |  | 
 | static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, | 
 | 					    unsigned function) | 
 | { | 
 | 	return pm8xxx_mpp_functions[function]; | 
 | } | 
 |  | 
 | static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, | 
 | 				      unsigned function, | 
 | 				      const char * const **groups, | 
 | 				      unsigned * const num_groups) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	*groups = pm8xxx_groups; | 
 | 	*num_groups = pctrl->npins; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev, | 
 | 				 unsigned function, | 
 | 				 unsigned group) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data; | 
 |  | 
 | 	pin->mode = function; | 
 | 	pm8xxx_mpp_update(pctrl, pin); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct pinmux_ops pm8xxx_pinmux_ops = { | 
 | 	.get_functions_count	= pm8xxx_get_functions_count, | 
 | 	.get_function_name	= pm8xxx_get_function_name, | 
 | 	.get_function_groups	= pm8xxx_get_function_groups, | 
 | 	.set_mux		= pm8xxx_pinmux_set_mux, | 
 | }; | 
 |  | 
 | static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev, | 
 | 				 unsigned int offset, | 
 | 				 unsigned long *config) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 | 	unsigned param = pinconf_to_config_param(*config); | 
 | 	unsigned arg; | 
 |  | 
 | 	switch (param) { | 
 | 	case PIN_CONFIG_BIAS_PULL_UP: | 
 | 		arg = pin->pullup; | 
 | 		break; | 
 | 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: | 
 | 		arg = pin->high_z; | 
 | 		break; | 
 | 	case PIN_CONFIG_INPUT_ENABLE: | 
 | 		arg = pin->input; | 
 | 		break; | 
 | 	case PIN_CONFIG_OUTPUT: | 
 | 		arg = pin->output_value; | 
 | 		break; | 
 | 	case PIN_CONFIG_POWER_SOURCE: | 
 | 		arg = pin->power_source; | 
 | 		break; | 
 | 	case PIN_CONFIG_DRIVE_STRENGTH: | 
 | 		arg = pin->drive_strength; | 
 | 		break; | 
 | 	case PM8XXX_CONFIG_DTEST_SELECTOR: | 
 | 		arg = pin->dtest; | 
 | 		break; | 
 | 	case PM8XXX_CONFIG_AMUX: | 
 | 		arg = pin->amux; | 
 | 		break; | 
 | 	case PM8XXX_CONFIG_ALEVEL: | 
 | 		arg = pin->aout_level; | 
 | 		break; | 
 | 	case PM8XXX_CONFIG_PAIRED: | 
 | 		arg = pin->paired; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	*config = pinconf_to_config_packed(param, arg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev, | 
 | 				 unsigned int offset, | 
 | 				 unsigned long *configs, | 
 | 				 unsigned num_configs) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 | 	unsigned param; | 
 | 	unsigned arg; | 
 | 	unsigned i; | 
 |  | 
 | 	for (i = 0; i < num_configs; i++) { | 
 | 		param = pinconf_to_config_param(configs[i]); | 
 | 		arg = pinconf_to_config_argument(configs[i]); | 
 |  | 
 | 		switch (param) { | 
 | 		case PIN_CONFIG_BIAS_PULL_UP: | 
 | 			pin->pullup = arg; | 
 | 			break; | 
 | 		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: | 
 | 			pin->high_z = true; | 
 | 			break; | 
 | 		case PIN_CONFIG_INPUT_ENABLE: | 
 | 			pin->input = true; | 
 | 			break; | 
 | 		case PIN_CONFIG_OUTPUT: | 
 | 			pin->output = true; | 
 | 			pin->output_value = !!arg; | 
 | 			break; | 
 | 		case PIN_CONFIG_POWER_SOURCE: | 
 | 			pin->power_source = arg; | 
 | 			break; | 
 | 		case PIN_CONFIG_DRIVE_STRENGTH: | 
 | 			pin->drive_strength = arg; | 
 | 			break; | 
 | 		case PM8XXX_CONFIG_DTEST_SELECTOR: | 
 | 			pin->dtest = arg; | 
 | 			break; | 
 | 		case PM8XXX_CONFIG_AMUX: | 
 | 			pin->amux = arg; | 
 | 			break; | 
 | 		case PM8XXX_CONFIG_ALEVEL: | 
 | 			pin->aout_level = arg; | 
 | 			break; | 
 | 		case PM8XXX_CONFIG_PAIRED: | 
 | 			pin->paired = !!arg; | 
 | 			break; | 
 | 		default: | 
 | 			dev_err(pctrl->dev, | 
 | 				"unsupported config parameter: %x\n", | 
 | 				param); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pm8xxx_mpp_update(pctrl, pin); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct pinconf_ops pm8xxx_pinconf_ops = { | 
 | 	.is_generic = true, | 
 | 	.pin_config_group_get = pm8xxx_pin_config_get, | 
 | 	.pin_config_group_set = pm8xxx_pin_config_set, | 
 | }; | 
 |  | 
 | static struct pinctrl_desc pm8xxx_pinctrl_desc = { | 
 | 	.name = "pm8xxx_mpp", | 
 | 	.pctlops = &pm8xxx_pinctrl_ops, | 
 | 	.pmxops = &pm8xxx_pinmux_ops, | 
 | 	.confops = &pm8xxx_pinconf_ops, | 
 | 	.owner = THIS_MODULE, | 
 | }; | 
 |  | 
 | static int pm8xxx_mpp_direction_input(struct gpio_chip *chip, | 
 | 				       unsigned offset) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 |  | 
 | 	switch (pin->mode) { | 
 | 	case PM8XXX_MPP_DIGITAL: | 
 | 		pin->input = true; | 
 | 		break; | 
 | 	case PM8XXX_MPP_ANALOG: | 
 | 		pin->input = true; | 
 | 		pin->output = true; | 
 | 		break; | 
 | 	case PM8XXX_MPP_SINK: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	pm8xxx_mpp_update(pctrl, pin); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pm8xxx_mpp_direction_output(struct gpio_chip *chip, | 
 | 					unsigned offset, | 
 | 					int value) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 |  | 
 | 	switch (pin->mode) { | 
 | 	case PM8XXX_MPP_DIGITAL: | 
 | 		pin->output = true; | 
 | 		break; | 
 | 	case PM8XXX_MPP_ANALOG: | 
 | 		pin->input = false; | 
 | 		pin->output = true; | 
 | 		break; | 
 | 	case PM8XXX_MPP_SINK: | 
 | 		pin->input = false; | 
 | 		pin->output = true; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	pm8xxx_mpp_update(pctrl, pin); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 | 	bool state; | 
 | 	int ret; | 
 |  | 
 | 	if (!pin->input) | 
 | 		return !!pin->output_value; | 
 |  | 
 | 	ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state); | 
 | 	if (!ret) | 
 | 		ret = !!state; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 |  | 
 | 	pin->output_value = !!value; | 
 |  | 
 | 	pm8xxx_mpp_update(pctrl, pin); | 
 | } | 
 |  | 
 | static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip, | 
 | 				const struct of_phandle_args *gpio_desc, | 
 | 				u32 *flags) | 
 | { | 
 | 	if (chip->of_gpio_n_cells < 2) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (flags) | 
 | 		*flags = gpio_desc->args[1]; | 
 |  | 
 | 	return gpio_desc->args[0] - 1; | 
 | } | 
 |  | 
 |  | 
 | static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 |  | 
 | 	return pin->irq; | 
 | } | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | #include <linux/seq_file.h> | 
 |  | 
 | static void pm8xxx_mpp_dbg_show_one(struct seq_file *s, | 
 | 				  struct pinctrl_dev *pctldev, | 
 | 				  struct gpio_chip *chip, | 
 | 				  unsigned offset, | 
 | 				  unsigned gpio) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip); | 
 | 	struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data; | 
 |  | 
 | 	static const char * const aout_lvls[] = { | 
 | 		"1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2", | 
 | 		"abus3" | 
 | 	}; | 
 |  | 
 | 	static const char * const amuxs[] = { | 
 | 		"amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2", | 
 | 		"abus3", | 
 | 	}; | 
 |  | 
 | 	seq_printf(s, " mpp%-2d:", offset + 1); | 
 |  | 
 | 	switch (pin->mode) { | 
 | 	case PM8XXX_MPP_DIGITAL: | 
 | 		seq_puts(s, " digital "); | 
 | 		if (pin->dtest) { | 
 | 			seq_printf(s, "dtest%d\n", pin->dtest); | 
 | 		} else if (pin->input && pin->output) { | 
 | 			if (pin->high_z) | 
 | 				seq_puts(s, "bi-dir high-z"); | 
 | 			else | 
 | 				seq_printf(s, "bi-dir %dOhm", pin->pullup); | 
 | 		} else if (pin->input) { | 
 | 			if (pin->dtest) | 
 | 				seq_printf(s, "in dtest%d", pin->dtest); | 
 | 			else | 
 | 				seq_puts(s, "in gpio"); | 
 | 		} else if (pin->output) { | 
 | 			seq_puts(s, "out "); | 
 |  | 
 | 			if (!pin->paired) { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "high" : "low"); | 
 | 			} else { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "inverted" : "follow"); | 
 | 			} | 
 | 		} | 
 | 		break; | 
 | 	case PM8XXX_MPP_ANALOG: | 
 | 		seq_puts(s, " analog "); | 
 | 		if (pin->output) { | 
 | 			seq_printf(s, "out %s ", aout_lvls[pin->aout_level]); | 
 | 			if (!pin->paired) { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "high" : "low"); | 
 | 			} else { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "inverted" : "follow"); | 
 | 			} | 
 | 		} else { | 
 | 			seq_printf(s, "input mux %s", amuxs[pin->amux]); | 
 | 		} | 
 | 		break; | 
 | 	case PM8XXX_MPP_SINK: | 
 | 		seq_printf(s, " sink %dmA ", pin->drive_strength); | 
 | 		if (pin->dtest) { | 
 | 			seq_printf(s, "dtest%d", pin->dtest); | 
 | 		} else { | 
 | 			if (!pin->paired) { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "high" : "low"); | 
 | 			} else { | 
 | 				seq_puts(s, pin->output_value ? | 
 | 					 "inverted" : "follow"); | 
 | 			} | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip) | 
 | { | 
 | 	unsigned gpio = chip->base; | 
 | 	unsigned i; | 
 |  | 
 | 	for (i = 0; i < chip->ngpio; i++, gpio++) { | 
 | 		pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio); | 
 | 		seq_puts(s, "\n"); | 
 | 	} | 
 | } | 
 |  | 
 | #else | 
 | #define pm8xxx_mpp_dbg_show NULL | 
 | #endif | 
 |  | 
 | static const struct gpio_chip pm8xxx_mpp_template = { | 
 | 	.direction_input = pm8xxx_mpp_direction_input, | 
 | 	.direction_output = pm8xxx_mpp_direction_output, | 
 | 	.get = pm8xxx_mpp_get, | 
 | 	.set = pm8xxx_mpp_set, | 
 | 	.of_xlate = pm8xxx_mpp_of_xlate, | 
 | 	.to_irq = pm8xxx_mpp_to_irq, | 
 | 	.dbg_show = pm8xxx_mpp_dbg_show, | 
 | 	.owner = THIS_MODULE, | 
 | }; | 
 |  | 
 | static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl, | 
 | 			       struct pm8xxx_pin_data *pin) | 
 | { | 
 | 	unsigned int val; | 
 | 	unsigned level; | 
 | 	unsigned ctrl; | 
 | 	unsigned type; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(pctrl->regmap, pin->reg, &val); | 
 | 	if (ret) { | 
 | 		dev_err(pctrl->dev, "failed to read register\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	type = (val >> 5) & 7; | 
 | 	level = (val >> 2) & 7; | 
 | 	ctrl = (val) & 3; | 
 |  | 
 | 	switch (type) { | 
 | 	case PM8XXX_MPP_TYPE_D_INPUT: | 
 | 		pin->mode = PM8XXX_MPP_DIGITAL; | 
 | 		pin->input = true; | 
 | 		pin->power_source = level; | 
 | 		pin->dtest = ctrl; | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_D_OUTPUT: | 
 | 		pin->mode = PM8XXX_MPP_DIGITAL; | 
 | 		pin->output = true; | 
 | 		pin->power_source = level; | 
 | 		pin->output_value = !!(ctrl & BIT(0)); | 
 | 		pin->paired = !!(ctrl & BIT(1)); | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_D_BI_DIR: | 
 | 		pin->mode = PM8XXX_MPP_DIGITAL; | 
 | 		pin->input = true; | 
 | 		pin->output = true; | 
 | 		pin->power_source = level; | 
 | 		switch (ctrl) { | 
 | 		case PM8XXX_MPP_BI_PULLUP_1KOHM: | 
 | 			pin->pullup = 600; | 
 | 			break; | 
 | 		case PM8XXX_MPP_BI_PULLUP_OPEN: | 
 | 			pin->high_z = true; | 
 | 			break; | 
 | 		case PM8XXX_MPP_BI_PULLUP_10KOHM: | 
 | 			pin->pullup = 10000; | 
 | 			break; | 
 | 		case PM8XXX_MPP_BI_PULLUP_30KOHM: | 
 | 			pin->pullup = 30000; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_A_INPUT: | 
 | 		pin->mode = PM8XXX_MPP_ANALOG; | 
 | 		pin->input = true; | 
 | 		pin->amux = level; | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_A_OUTPUT: | 
 | 		pin->mode = PM8XXX_MPP_ANALOG; | 
 | 		pin->output = true; | 
 | 		pin->aout_level = level; | 
 | 		pin->output_value = !!(ctrl & BIT(0)); | 
 | 		pin->paired = !!(ctrl & BIT(1)); | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_SINK: | 
 | 		pin->mode = PM8XXX_MPP_SINK; | 
 | 		pin->drive_strength = 5 * (level + 1); | 
 | 		pin->output_value = !!(ctrl & BIT(0)); | 
 | 		pin->paired = !!(ctrl & BIT(1)); | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_DTEST_SINK: | 
 | 		pin->mode = PM8XXX_MPP_SINK; | 
 | 		pin->dtest = ctrl + 1; | 
 | 		pin->drive_strength = 5 * (level + 1); | 
 | 		break; | 
 | 	case PM8XXX_MPP_TYPE_DTEST_OUTPUT: | 
 | 		pin->mode = PM8XXX_MPP_DIGITAL; | 
 | 		pin->power_source = level; | 
 | 		if (ctrl >= 1) | 
 | 			pin->dtest = ctrl; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id pm8xxx_mpp_of_match[] = { | 
 | 	{ .compatible = "qcom,pm8018-mpp" }, | 
 | 	{ .compatible = "qcom,pm8038-mpp" }, | 
 | 	{ .compatible = "qcom,pm8058-mpp" }, | 
 | 	{ .compatible = "qcom,pm8917-mpp" }, | 
 | 	{ .compatible = "qcom,pm8821-mpp" }, | 
 | 	{ .compatible = "qcom,pm8921-mpp" }, | 
 | 	{ .compatible = "qcom,ssbi-mpp" }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match); | 
 |  | 
 | static int pm8xxx_mpp_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct pm8xxx_pin_data *pin_data; | 
 | 	struct pinctrl_pin_desc *pins; | 
 | 	struct pm8xxx_mpp *pctrl; | 
 | 	int ret; | 
 | 	int i, npins; | 
 |  | 
 | 	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); | 
 | 	if (!pctrl) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pctrl->dev = &pdev->dev; | 
 | 	npins = platform_irq_count(pdev); | 
 | 	if (!npins) | 
 | 		return -EINVAL; | 
 | 	if (npins < 0) | 
 | 		return npins; | 
 | 	pctrl->npins = npins; | 
 |  | 
 | 	pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); | 
 | 	if (!pctrl->regmap) { | 
 | 		dev_err(&pdev->dev, "parent regmap unavailable\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	pctrl->desc = pm8xxx_pinctrl_desc; | 
 | 	pctrl->desc.npins = pctrl->npins; | 
 |  | 
 | 	pins = devm_kcalloc(&pdev->dev, | 
 | 			    pctrl->desc.npins, | 
 | 			    sizeof(struct pinctrl_pin_desc), | 
 | 			    GFP_KERNEL); | 
 | 	if (!pins) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pin_data = devm_kcalloc(&pdev->dev, | 
 | 				pctrl->desc.npins, | 
 | 				sizeof(struct pm8xxx_pin_data), | 
 | 				GFP_KERNEL); | 
 | 	if (!pin_data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (i = 0; i < pctrl->desc.npins; i++) { | 
 | 		pin_data[i].reg = SSBI_REG_ADDR_MPP(i); | 
 | 		pin_data[i].irq = platform_get_irq(pdev, i); | 
 | 		if (pin_data[i].irq < 0) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"missing interrupts for pin %d\n", i); | 
 | 			return pin_data[i].irq; | 
 | 		} | 
 |  | 
 | 		ret = pm8xxx_pin_populate(pctrl, &pin_data[i]); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		pins[i].number = i; | 
 | 		pins[i].name = pm8xxx_groups[i]; | 
 | 		pins[i].drv_data = &pin_data[i]; | 
 | 	} | 
 | 	pctrl->desc.pins = pins; | 
 |  | 
 | 	pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings); | 
 | 	pctrl->desc.custom_params = pm8xxx_mpp_bindings; | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	pctrl->desc.custom_conf_items = pm8xxx_conf_items; | 
 | #endif | 
 |  | 
 | 	pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl); | 
 | 	if (IS_ERR(pctrl->pctrl)) { | 
 | 		dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n"); | 
 | 		return PTR_ERR(pctrl->pctrl); | 
 | 	} | 
 |  | 
 | 	pctrl->chip = pm8xxx_mpp_template; | 
 | 	pctrl->chip.base = -1; | 
 | 	pctrl->chip.parent = &pdev->dev; | 
 | 	pctrl->chip.of_node = pdev->dev.of_node; | 
 | 	pctrl->chip.of_gpio_n_cells = 2; | 
 | 	pctrl->chip.label = dev_name(pctrl->dev); | 
 | 	pctrl->chip.ngpio = pctrl->npins; | 
 | 	ret = gpiochip_add_data(&pctrl->chip, pctrl); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed register gpiochip\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = gpiochip_add_pin_range(&pctrl->chip, | 
 | 				     dev_name(pctrl->dev), | 
 | 				     0, 0, pctrl->chip.ngpio); | 
 | 	if (ret) { | 
 | 		dev_err(pctrl->dev, "failed to add pin range\n"); | 
 | 		goto unregister_gpiochip; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, pctrl); | 
 |  | 
 | 	dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | unregister_gpiochip: | 
 | 	gpiochip_remove(&pctrl->chip); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pm8xxx_mpp_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev); | 
 |  | 
 | 	gpiochip_remove(&pctrl->chip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver pm8xxx_mpp_driver = { | 
 | 	.driver = { | 
 | 		.name = "qcom-ssbi-mpp", | 
 | 		.of_match_table = pm8xxx_mpp_of_match, | 
 | 	}, | 
 | 	.probe = pm8xxx_mpp_probe, | 
 | 	.remove = pm8xxx_mpp_remove, | 
 | }; | 
 |  | 
 | module_platform_driver(pm8xxx_mpp_driver); | 
 |  | 
 | MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); | 
 | MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver"); | 
 | MODULE_LICENSE("GPL v2"); |