| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Thunderbolt Cactus Ridge driver - bus logic (NHI independent) | 
 |  * | 
 |  * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> | 
 |  */ | 
 |  | 
 | #include <linux/slab.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/platform_data/x86/apple.h> | 
 |  | 
 | #include "tb.h" | 
 | #include "tb_regs.h" | 
 | #include "tunnel_pci.h" | 
 |  | 
 | /** | 
 |  * struct tb_cm - Simple Thunderbolt connection manager | 
 |  * @tunnel_list: List of active tunnels | 
 |  * @hotplug_active: tb_handle_hotplug will stop progressing plug | 
 |  *		    events and exit if this is not set (it needs to | 
 |  *		    acquire the lock one more time). Used to drain wq | 
 |  *		    after cfg has been paused. | 
 |  */ | 
 | struct tb_cm { | 
 | 	struct list_head tunnel_list; | 
 | 	bool hotplug_active; | 
 | }; | 
 |  | 
 | /* enumeration & hot plug handling */ | 
 |  | 
 |  | 
 | static void tb_scan_port(struct tb_port *port); | 
 |  | 
 | /** | 
 |  * tb_scan_switch() - scan for and initialize downstream switches | 
 |  */ | 
 | static void tb_scan_switch(struct tb_switch *sw) | 
 | { | 
 | 	int i; | 
 | 	for (i = 1; i <= sw->config.max_port_number; i++) | 
 | 		tb_scan_port(&sw->ports[i]); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_scan_port() - check for and initialize switches below port | 
 |  */ | 
 | static void tb_scan_port(struct tb_port *port) | 
 | { | 
 | 	struct tb_switch *sw; | 
 | 	if (tb_is_upstream_port(port)) | 
 | 		return; | 
 | 	if (port->config.type != TB_TYPE_PORT) | 
 | 		return; | 
 | 	if (port->dual_link_port && port->link_nr) | 
 | 		return; /* | 
 | 			 * Downstream switch is reachable through two ports. | 
 | 			 * Only scan on the primary port (link_nr == 0). | 
 | 			 */ | 
 | 	if (tb_wait_for_port(port, false) <= 0) | 
 | 		return; | 
 | 	if (port->remote) { | 
 | 		tb_port_WARN(port, "port already has a remote!\n"); | 
 | 		return; | 
 | 	} | 
 | 	sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, | 
 | 			     tb_downstream_route(port)); | 
 | 	if (!sw) | 
 | 		return; | 
 |  | 
 | 	if (tb_switch_configure(sw)) { | 
 | 		tb_switch_put(sw); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	sw->authorized = true; | 
 |  | 
 | 	if (tb_switch_add(sw)) { | 
 | 		tb_switch_put(sw); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	port->remote = tb_upstream_port(sw); | 
 | 	tb_upstream_port(sw)->remote = port; | 
 | 	tb_scan_switch(sw); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away | 
 |  */ | 
 | static void tb_free_invalid_tunnels(struct tb *tb) | 
 | { | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 | 	struct tb_pci_tunnel *tunnel; | 
 | 	struct tb_pci_tunnel *n; | 
 |  | 
 | 	list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { | 
 | 		if (tb_pci_is_invalid(tunnel)) { | 
 | 			tb_pci_deactivate(tunnel); | 
 | 			list_del(&tunnel->list); | 
 | 			tb_pci_free(tunnel); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * tb_free_unplugged_children() - traverse hierarchy and free unplugged switches | 
 |  */ | 
 | static void tb_free_unplugged_children(struct tb_switch *sw) | 
 | { | 
 | 	int i; | 
 | 	for (i = 1; i <= sw->config.max_port_number; i++) { | 
 | 		struct tb_port *port = &sw->ports[i]; | 
 | 		if (tb_is_upstream_port(port)) | 
 | 			continue; | 
 | 		if (!port->remote) | 
 | 			continue; | 
 | 		if (port->remote->sw->is_unplugged) { | 
 | 			tb_switch_remove(port->remote->sw); | 
 | 			port->remote = NULL; | 
 | 		} else { | 
 | 			tb_free_unplugged_children(port->remote->sw); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * find_pci_up_port() - return the first PCIe up port on @sw or NULL | 
 |  */ | 
 | static struct tb_port *tb_find_pci_up_port(struct tb_switch *sw) | 
 | { | 
 | 	int i; | 
 | 	for (i = 1; i <= sw->config.max_port_number; i++) | 
 | 		if (sw->ports[i].config.type == TB_TYPE_PCIE_UP) | 
 | 			return &sw->ports[i]; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * find_unused_down_port() - return the first inactive PCIe down port on @sw | 
 |  */ | 
 | static struct tb_port *tb_find_unused_down_port(struct tb_switch *sw) | 
 | { | 
 | 	int i; | 
 | 	int cap; | 
 | 	int res; | 
 | 	int data; | 
 | 	for (i = 1; i <= sw->config.max_port_number; i++) { | 
 | 		if (tb_is_upstream_port(&sw->ports[i])) | 
 | 			continue; | 
 | 		if (sw->ports[i].config.type != TB_TYPE_PCIE_DOWN) | 
 | 			continue; | 
 | 		cap = tb_port_find_cap(&sw->ports[i], TB_PORT_CAP_ADAP); | 
 | 		if (cap < 0) | 
 | 			continue; | 
 | 		res = tb_port_read(&sw->ports[i], &data, TB_CFG_PORT, cap, 1); | 
 | 		if (res < 0) | 
 | 			continue; | 
 | 		if (data & 0x80000000) | 
 | 			continue; | 
 | 		return &sw->ports[i]; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_activate_pcie_devices() - scan for and activate PCIe devices | 
 |  * | 
 |  * This method is somewhat ad hoc. For now it only supports one device | 
 |  * per port and only devices at depth 1. | 
 |  */ | 
 | static void tb_activate_pcie_devices(struct tb *tb) | 
 | { | 
 | 	int i; | 
 | 	int cap; | 
 | 	u32 data; | 
 | 	struct tb_switch *sw; | 
 | 	struct tb_port *up_port; | 
 | 	struct tb_port *down_port; | 
 | 	struct tb_pci_tunnel *tunnel; | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 |  | 
 | 	/* scan for pcie devices at depth 1*/ | 
 | 	for (i = 1; i <= tb->root_switch->config.max_port_number; i++) { | 
 | 		if (tb_is_upstream_port(&tb->root_switch->ports[i])) | 
 | 			continue; | 
 | 		if (tb->root_switch->ports[i].config.type != TB_TYPE_PORT) | 
 | 			continue; | 
 | 		if (!tb->root_switch->ports[i].remote) | 
 | 			continue; | 
 | 		sw = tb->root_switch->ports[i].remote->sw; | 
 | 		up_port = tb_find_pci_up_port(sw); | 
 | 		if (!up_port) { | 
 | 			tb_sw_info(sw, "no PCIe devices found, aborting\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* check whether port is already activated */ | 
 | 		cap = tb_port_find_cap(up_port, TB_PORT_CAP_ADAP); | 
 | 		if (cap < 0) | 
 | 			continue; | 
 | 		if (tb_port_read(up_port, &data, TB_CFG_PORT, cap, 1)) | 
 | 			continue; | 
 | 		if (data & 0x80000000) { | 
 | 			tb_port_info(up_port, | 
 | 				     "PCIe port already activated, aborting\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		down_port = tb_find_unused_down_port(tb->root_switch); | 
 | 		if (!down_port) { | 
 | 			tb_port_info(up_port, | 
 | 				     "All PCIe down ports are occupied, aborting\n"); | 
 | 			continue; | 
 | 		} | 
 | 		tunnel = tb_pci_alloc(tb, up_port, down_port); | 
 | 		if (!tunnel) { | 
 | 			tb_port_info(up_port, | 
 | 				     "PCIe tunnel allocation failed, aborting\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (tb_pci_activate(tunnel)) { | 
 | 			tb_port_info(up_port, | 
 | 				     "PCIe tunnel activation failed, aborting\n"); | 
 | 			tb_pci_free(tunnel); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		list_add(&tunnel->list, &tcm->tunnel_list); | 
 | 	} | 
 | } | 
 |  | 
 | /* hotplug handling */ | 
 |  | 
 | struct tb_hotplug_event { | 
 | 	struct work_struct work; | 
 | 	struct tb *tb; | 
 | 	u64 route; | 
 | 	u8 port; | 
 | 	bool unplug; | 
 | }; | 
 |  | 
 | /** | 
 |  * tb_handle_hotplug() - handle hotplug event | 
 |  * | 
 |  * Executes on tb->wq. | 
 |  */ | 
 | static void tb_handle_hotplug(struct work_struct *work) | 
 | { | 
 | 	struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); | 
 | 	struct tb *tb = ev->tb; | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 | 	struct tb_switch *sw; | 
 | 	struct tb_port *port; | 
 | 	mutex_lock(&tb->lock); | 
 | 	if (!tcm->hotplug_active) | 
 | 		goto out; /* during init, suspend or shutdown */ | 
 |  | 
 | 	sw = get_switch_at_route(tb->root_switch, ev->route); | 
 | 	if (!sw) { | 
 | 		tb_warn(tb, | 
 | 			"hotplug event from non existent switch %llx:%x (unplug: %d)\n", | 
 | 			ev->route, ev->port, ev->unplug); | 
 | 		goto out; | 
 | 	} | 
 | 	if (ev->port > sw->config.max_port_number) { | 
 | 		tb_warn(tb, | 
 | 			"hotplug event from non existent port %llx:%x (unplug: %d)\n", | 
 | 			ev->route, ev->port, ev->unplug); | 
 | 		goto out; | 
 | 	} | 
 | 	port = &sw->ports[ev->port]; | 
 | 	if (tb_is_upstream_port(port)) { | 
 | 		tb_warn(tb, | 
 | 			"hotplug event for upstream port %llx:%x (unplug: %d)\n", | 
 | 			ev->route, ev->port, ev->unplug); | 
 | 		goto out; | 
 | 	} | 
 | 	if (ev->unplug) { | 
 | 		if (port->remote) { | 
 | 			tb_port_info(port, "unplugged\n"); | 
 | 			tb_sw_set_unplugged(port->remote->sw); | 
 | 			tb_free_invalid_tunnels(tb); | 
 | 			tb_switch_remove(port->remote->sw); | 
 | 			port->remote = NULL; | 
 | 		} else { | 
 | 			tb_port_info(port, | 
 | 				     "got unplug event for disconnected port, ignoring\n"); | 
 | 		} | 
 | 	} else if (port->remote) { | 
 | 		tb_port_info(port, | 
 | 			     "got plug event for connected port, ignoring\n"); | 
 | 	} else { | 
 | 		tb_port_info(port, "hotplug: scanning\n"); | 
 | 		tb_scan_port(port); | 
 | 		if (!port->remote) { | 
 | 			tb_port_info(port, "hotplug: no switch found\n"); | 
 | 		} else if (port->remote->sw->config.depth > 1) { | 
 | 			tb_sw_warn(port->remote->sw, | 
 | 				   "hotplug: chaining not supported\n"); | 
 | 		} else { | 
 | 			tb_sw_info(port->remote->sw, | 
 | 				   "hotplug: activating pcie devices\n"); | 
 | 			tb_activate_pcie_devices(tb); | 
 | 		} | 
 | 	} | 
 | out: | 
 | 	mutex_unlock(&tb->lock); | 
 | 	kfree(ev); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_schedule_hotplug_handler() - callback function for the control channel | 
 |  * | 
 |  * Delegates to tb_handle_hotplug. | 
 |  */ | 
 | static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, | 
 | 			    const void *buf, size_t size) | 
 | { | 
 | 	const struct cfg_event_pkg *pkg = buf; | 
 | 	struct tb_hotplug_event *ev; | 
 | 	u64 route; | 
 |  | 
 | 	if (type != TB_CFG_PKG_EVENT) { | 
 | 		tb_warn(tb, "unexpected event %#x, ignoring\n", type); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	route = tb_cfg_get_route(&pkg->header); | 
 |  | 
 | 	if (tb_cfg_error(tb->ctl, route, pkg->port, | 
 | 			 TB_CFG_ERROR_ACK_PLUG_EVENT)) { | 
 | 		tb_warn(tb, "could not ack plug event on %llx:%x\n", route, | 
 | 			pkg->port); | 
 | 	} | 
 |  | 
 | 	ev = kmalloc(sizeof(*ev), GFP_KERNEL); | 
 | 	if (!ev) | 
 | 		return; | 
 | 	INIT_WORK(&ev->work, tb_handle_hotplug); | 
 | 	ev->tb = tb; | 
 | 	ev->route = route; | 
 | 	ev->port = pkg->port; | 
 | 	ev->unplug = pkg->unplug; | 
 | 	queue_work(tb->wq, &ev->work); | 
 | } | 
 |  | 
 | static void tb_stop(struct tb *tb) | 
 | { | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 | 	struct tb_pci_tunnel *tunnel; | 
 | 	struct tb_pci_tunnel *n; | 
 |  | 
 | 	/* tunnels are only present after everything has been initialized */ | 
 | 	list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { | 
 | 		tb_pci_deactivate(tunnel); | 
 | 		tb_pci_free(tunnel); | 
 | 	} | 
 | 	tb_switch_remove(tb->root_switch); | 
 | 	tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ | 
 | } | 
 |  | 
 | static int tb_start(struct tb *tb) | 
 | { | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 | 	int ret; | 
 |  | 
 | 	tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); | 
 | 	if (!tb->root_switch) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * ICM firmware upgrade needs running firmware and in native | 
 | 	 * mode that is not available so disable firmware upgrade of the | 
 | 	 * root switch. | 
 | 	 */ | 
 | 	tb->root_switch->no_nvm_upgrade = true; | 
 |  | 
 | 	ret = tb_switch_configure(tb->root_switch); | 
 | 	if (ret) { | 
 | 		tb_switch_put(tb->root_switch); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Announce the switch to the world */ | 
 | 	ret = tb_switch_add(tb->root_switch); | 
 | 	if (ret) { | 
 | 		tb_switch_put(tb->root_switch); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Full scan to discover devices added before the driver was loaded. */ | 
 | 	tb_scan_switch(tb->root_switch); | 
 | 	tb_activate_pcie_devices(tb); | 
 |  | 
 | 	/* Allow tb_handle_hotplug to progress events */ | 
 | 	tcm->hotplug_active = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_suspend_noirq(struct tb *tb) | 
 | { | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 |  | 
 | 	tb_info(tb, "suspending...\n"); | 
 | 	tb_switch_suspend(tb->root_switch); | 
 | 	tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ | 
 | 	tb_info(tb, "suspend finished\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_resume_noirq(struct tb *tb) | 
 | { | 
 | 	struct tb_cm *tcm = tb_priv(tb); | 
 | 	struct tb_pci_tunnel *tunnel, *n; | 
 |  | 
 | 	tb_info(tb, "resuming...\n"); | 
 |  | 
 | 	/* remove any pci devices the firmware might have setup */ | 
 | 	tb_switch_reset(tb, 0); | 
 |  | 
 | 	tb_switch_resume(tb->root_switch); | 
 | 	tb_free_invalid_tunnels(tb); | 
 | 	tb_free_unplugged_children(tb->root_switch); | 
 | 	list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) | 
 | 		tb_pci_restart(tunnel); | 
 | 	if (!list_empty(&tcm->tunnel_list)) { | 
 | 		/* | 
 | 		 * the pcie links need some time to get going. | 
 | 		 * 100ms works for me... | 
 | 		 */ | 
 | 		tb_info(tb, "tunnels restarted, sleeping for 100ms\n"); | 
 | 		msleep(100); | 
 | 	} | 
 | 	 /* Allow tb_handle_hotplug to progress events */ | 
 | 	tcm->hotplug_active = true; | 
 | 	tb_info(tb, "resume finished\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct tb_cm_ops tb_cm_ops = { | 
 | 	.start = tb_start, | 
 | 	.stop = tb_stop, | 
 | 	.suspend_noirq = tb_suspend_noirq, | 
 | 	.resume_noirq = tb_resume_noirq, | 
 | 	.handle_event = tb_handle_event, | 
 | }; | 
 |  | 
 | struct tb *tb_probe(struct tb_nhi *nhi) | 
 | { | 
 | 	struct tb_cm *tcm; | 
 | 	struct tb *tb; | 
 |  | 
 | 	if (!x86_apple_machine) | 
 | 		return NULL; | 
 |  | 
 | 	tb = tb_domain_alloc(nhi, sizeof(*tcm)); | 
 | 	if (!tb) | 
 | 		return NULL; | 
 |  | 
 | 	tb->security_level = TB_SECURITY_NONE; | 
 | 	tb->cm_ops = &tb_cm_ops; | 
 |  | 
 | 	tcm = tb_priv(tb); | 
 | 	INIT_LIST_HEAD(&tcm->tunnel_list); | 
 |  | 
 | 	return tb; | 
 | } |