|  | /* | 
|  | * HD-audio stream operations | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/clocksource.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/hdaudio.h> | 
|  | #include <sound/hda_register.h> | 
|  | #include "trace.h" | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_init - initialize each stream (aka device) | 
|  | * @bus: HD-audio core bus | 
|  | * @azx_dev: HD-audio core stream object to initialize | 
|  | * @idx: stream index number | 
|  | * @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) | 
|  | * @tag: the tag id to assign | 
|  | * | 
|  | * Assign the starting bdl address to each stream (device) and initialize. | 
|  | */ | 
|  | void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, | 
|  | int idx, int direction, int tag) | 
|  | { | 
|  | azx_dev->bus = bus; | 
|  | /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ | 
|  | azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); | 
|  | /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ | 
|  | azx_dev->sd_int_sta_mask = 1 << idx; | 
|  | azx_dev->index = idx; | 
|  | azx_dev->direction = direction; | 
|  | azx_dev->stream_tag = tag; | 
|  | snd_hdac_dsp_lock_init(azx_dev); | 
|  | list_add_tail(&azx_dev->list, &bus->stream_list); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_init); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_start - start a stream | 
|  | * @azx_dev: HD-audio core stream to start | 
|  | * @fresh_start: false = wallclock timestamp relative to period wallclock | 
|  | * | 
|  | * Start a stream, set start_wallclk and set the running flag. | 
|  | */ | 
|  | void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  |  | 
|  | trace_snd_hdac_stream_start(bus, azx_dev); | 
|  |  | 
|  | azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); | 
|  | if (!fresh_start) | 
|  | azx_dev->start_wallclk -= azx_dev->period_wallclk; | 
|  |  | 
|  | /* enable SIE */ | 
|  | snd_hdac_chip_updatel(bus, INTCTL, 0, 1 << azx_dev->index); | 
|  | /* set DMA start and interrupt mask */ | 
|  | snd_hdac_stream_updateb(azx_dev, SD_CTL, | 
|  | 0, SD_CTL_DMA_START | SD_INT_MASK); | 
|  | azx_dev->running = true; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_start); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_clear - stop a stream DMA | 
|  | * @azx_dev: HD-audio core stream to stop | 
|  | */ | 
|  | void snd_hdac_stream_clear(struct hdac_stream *azx_dev) | 
|  | { | 
|  | snd_hdac_stream_updateb(azx_dev, SD_CTL, | 
|  | SD_CTL_DMA_START | SD_INT_MASK, 0); | 
|  | snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ | 
|  | azx_dev->running = false; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_clear); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_stop - stop a stream | 
|  | * @azx_dev: HD-audio core stream to stop | 
|  | * | 
|  | * Stop a stream DMA and disable stream interrupt | 
|  | */ | 
|  | void snd_hdac_stream_stop(struct hdac_stream *azx_dev) | 
|  | { | 
|  | trace_snd_hdac_stream_stop(azx_dev->bus, azx_dev); | 
|  |  | 
|  | snd_hdac_stream_clear(azx_dev); | 
|  | /* disable SIE */ | 
|  | snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_reset - reset a stream | 
|  | * @azx_dev: HD-audio core stream to reset | 
|  | */ | 
|  | void snd_hdac_stream_reset(struct hdac_stream *azx_dev) | 
|  | { | 
|  | unsigned char val; | 
|  | int timeout; | 
|  |  | 
|  | snd_hdac_stream_clear(azx_dev); | 
|  |  | 
|  | snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); | 
|  | udelay(3); | 
|  | timeout = 300; | 
|  | do { | 
|  | val = snd_hdac_stream_readb(azx_dev, SD_CTL) & | 
|  | SD_CTL_STREAM_RESET; | 
|  | if (val) | 
|  | break; | 
|  | } while (--timeout); | 
|  | val &= ~SD_CTL_STREAM_RESET; | 
|  | snd_hdac_stream_writeb(azx_dev, SD_CTL, val); | 
|  | udelay(3); | 
|  |  | 
|  | timeout = 300; | 
|  | /* waiting for hardware to report that the stream is out of reset */ | 
|  | do { | 
|  | val = snd_hdac_stream_readb(azx_dev, SD_CTL) & | 
|  | SD_CTL_STREAM_RESET; | 
|  | if (!val) | 
|  | break; | 
|  | } while (--timeout); | 
|  |  | 
|  | /* reset first position - may not be synced with hw at this time */ | 
|  | if (azx_dev->posbuf) | 
|  | *azx_dev->posbuf = 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_setup -  set up the SD for streaming | 
|  | * @azx_dev: HD-audio core stream to set up | 
|  | */ | 
|  | int snd_hdac_stream_setup(struct hdac_stream *azx_dev) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | struct snd_pcm_runtime *runtime; | 
|  | unsigned int val; | 
|  |  | 
|  | if (azx_dev->substream) | 
|  | runtime = azx_dev->substream->runtime; | 
|  | else | 
|  | runtime = NULL; | 
|  | /* make sure the run bit is zero for SD */ | 
|  | snd_hdac_stream_clear(azx_dev); | 
|  | /* program the stream_tag */ | 
|  | val = snd_hdac_stream_readl(azx_dev, SD_CTL); | 
|  | val = (val & ~SD_CTL_STREAM_TAG_MASK) | | 
|  | (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); | 
|  | if (!bus->snoop) | 
|  | val |= SD_CTL_TRAFFIC_PRIO; | 
|  | snd_hdac_stream_writel(azx_dev, SD_CTL, val); | 
|  |  | 
|  | /* program the length of samples in cyclic buffer */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); | 
|  |  | 
|  | /* program the stream format */ | 
|  | /* this value needs to be the same as the one programmed */ | 
|  | snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); | 
|  |  | 
|  | /* program the stream LVI (last valid index) of the BDL */ | 
|  | snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); | 
|  |  | 
|  | /* program the BDL address */ | 
|  | /* lower BDL address */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr); | 
|  | /* upper BDL address */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPU, | 
|  | upper_32_bits(azx_dev->bdl.addr)); | 
|  |  | 
|  | /* enable the position buffer */ | 
|  | if (bus->use_posbuf && bus->posbuf.addr) { | 
|  | if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) | 
|  | snd_hdac_chip_writel(bus, DPLBASE, | 
|  | (u32)bus->posbuf.addr | AZX_DPLBASE_ENABLE); | 
|  | } | 
|  |  | 
|  | /* set the interrupt enable bits in the descriptor control register */ | 
|  | snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); | 
|  |  | 
|  | if (azx_dev->direction == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | azx_dev->fifo_size = | 
|  | snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1; | 
|  | else | 
|  | azx_dev->fifo_size = 0; | 
|  |  | 
|  | /* when LPIB delay correction gives a small negative value, | 
|  | * we ignore it; currently set the threshold statically to | 
|  | * 64 frames | 
|  | */ | 
|  | if (runtime && runtime->period_size > 64) | 
|  | azx_dev->delay_negative_threshold = | 
|  | -frames_to_bytes(runtime, 64); | 
|  | else | 
|  | azx_dev->delay_negative_threshold = 0; | 
|  |  | 
|  | /* wallclk has 24Mhz clock source */ | 
|  | if (runtime) | 
|  | azx_dev->period_wallclk = (((runtime->period_size * 24000) / | 
|  | runtime->rate) * 1000); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_cleanup - cleanup a stream | 
|  | * @azx_dev: HD-audio core stream to clean up | 
|  | */ | 
|  | void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) | 
|  | { | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_CTL, 0); | 
|  | azx_dev->bufsize = 0; | 
|  | azx_dev->period_bytes = 0; | 
|  | azx_dev->format_val = 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_assign - assign a stream for the PCM | 
|  | * @bus: HD-audio core bus | 
|  | * @substream: PCM substream to assign | 
|  | * | 
|  | * Look for an unused stream for the given PCM substream, assign it | 
|  | * and return the stream object.  If no stream is free, returns NULL. | 
|  | * The function tries to keep using the same stream object when it's used | 
|  | * beforehand.  Also, when bus->reverse_assign flag is set, the last free | 
|  | * or matching entry is returned.  This is needed for some strange codecs. | 
|  | */ | 
|  | struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, | 
|  | struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct hdac_stream *azx_dev; | 
|  | struct hdac_stream *res = NULL; | 
|  |  | 
|  | /* make a non-zero unique key for the substream */ | 
|  | int key = (substream->pcm->device << 16) | (substream->number << 2) | | 
|  | (substream->stream + 1); | 
|  |  | 
|  | list_for_each_entry(azx_dev, &bus->stream_list, list) { | 
|  | if (azx_dev->direction != substream->stream) | 
|  | continue; | 
|  | if (azx_dev->opened) | 
|  | continue; | 
|  | if (azx_dev->assigned_key == key) { | 
|  | res = azx_dev; | 
|  | break; | 
|  | } | 
|  | if (!res || bus->reverse_assign) | 
|  | res = azx_dev; | 
|  | } | 
|  | if (res) { | 
|  | spin_lock_irq(&bus->reg_lock); | 
|  | res->opened = 1; | 
|  | res->running = 0; | 
|  | res->assigned_key = key; | 
|  | res->substream = substream; | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  | } | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_release - release the assigned stream | 
|  | * @azx_dev: HD-audio core stream to release | 
|  | * | 
|  | * Release the stream that has been assigned by snd_hdac_stream_assign(). | 
|  | */ | 
|  | void snd_hdac_stream_release(struct hdac_stream *azx_dev) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  |  | 
|  | spin_lock_irq(&bus->reg_lock); | 
|  | azx_dev->opened = 0; | 
|  | azx_dev->running = 0; | 
|  | azx_dev->substream = NULL; | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_release); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_get_stream - return hdac_stream based on stream_tag and | 
|  | * direction | 
|  | * | 
|  | * @bus: HD-audio core bus | 
|  | * @dir: direction for the stream to be found | 
|  | * @stream_tag: stream tag for stream to be found | 
|  | */ | 
|  | struct hdac_stream *snd_hdac_get_stream(struct hdac_bus *bus, | 
|  | int dir, int stream_tag) | 
|  | { | 
|  | struct hdac_stream *s; | 
|  |  | 
|  | list_for_each_entry(s, &bus->stream_list, list) { | 
|  | if (s->direction == dir && s->stream_tag == stream_tag) | 
|  | return s; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_get_stream); | 
|  |  | 
|  | /* | 
|  | * set up a BDL entry | 
|  | */ | 
|  | static int setup_bdle(struct hdac_bus *bus, | 
|  | struct snd_dma_buffer *dmab, | 
|  | struct hdac_stream *azx_dev, __le32 **bdlp, | 
|  | int ofs, int size, int with_ioc) | 
|  | { | 
|  | __le32 *bdl = *bdlp; | 
|  |  | 
|  | while (size > 0) { | 
|  | dma_addr_t addr; | 
|  | int chunk; | 
|  |  | 
|  | if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr = snd_sgbuf_get_addr(dmab, ofs); | 
|  | /* program the address field of the BDL entry */ | 
|  | bdl[0] = cpu_to_le32((u32)addr); | 
|  | bdl[1] = cpu_to_le32(upper_32_bits(addr)); | 
|  | /* program the size field of the BDL entry */ | 
|  | chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); | 
|  | /* one BDLE cannot cross 4K boundary on CTHDA chips */ | 
|  | if (bus->align_bdle_4k) { | 
|  | u32 remain = 0x1000 - (ofs & 0xfff); | 
|  |  | 
|  | if (chunk > remain) | 
|  | chunk = remain; | 
|  | } | 
|  | bdl[2] = cpu_to_le32(chunk); | 
|  | /* program the IOC to enable interrupt | 
|  | * only when the whole fragment is processed | 
|  | */ | 
|  | size -= chunk; | 
|  | bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); | 
|  | bdl += 4; | 
|  | azx_dev->frags++; | 
|  | ofs += chunk; | 
|  | } | 
|  | *bdlp = bdl; | 
|  | return ofs; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_setup_periods - set up BDL entries | 
|  | * @azx_dev: HD-audio core stream to set up | 
|  | * | 
|  | * Set up the buffer descriptor table of the given stream based on the | 
|  | * period and buffer sizes of the assigned PCM substream. | 
|  | */ | 
|  | int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | struct snd_pcm_substream *substream = azx_dev->substream; | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | __le32 *bdl; | 
|  | int i, ofs, periods, period_bytes; | 
|  | int pos_adj, pos_align; | 
|  |  | 
|  | /* reset BDL address */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | 
|  |  | 
|  | period_bytes = azx_dev->period_bytes; | 
|  | periods = azx_dev->bufsize / period_bytes; | 
|  |  | 
|  | /* program the initial BDL entries */ | 
|  | bdl = (__le32 *)azx_dev->bdl.area; | 
|  | ofs = 0; | 
|  | azx_dev->frags = 0; | 
|  |  | 
|  | pos_adj = bus->bdl_pos_adj; | 
|  | if (!azx_dev->no_period_wakeup && pos_adj > 0) { | 
|  | pos_align = pos_adj; | 
|  | pos_adj = (pos_adj * runtime->rate + 47999) / 48000; | 
|  | if (!pos_adj) | 
|  | pos_adj = pos_align; | 
|  | else | 
|  | pos_adj = ((pos_adj + pos_align - 1) / pos_align) * | 
|  | pos_align; | 
|  | pos_adj = frames_to_bytes(runtime, pos_adj); | 
|  | if (pos_adj >= period_bytes) { | 
|  | dev_warn(bus->dev, "Too big adjustment %d\n", | 
|  | pos_adj); | 
|  | pos_adj = 0; | 
|  | } else { | 
|  | ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), | 
|  | azx_dev, | 
|  | &bdl, ofs, pos_adj, true); | 
|  | if (ofs < 0) | 
|  | goto error; | 
|  | } | 
|  | } else | 
|  | pos_adj = 0; | 
|  |  | 
|  | for (i = 0; i < periods; i++) { | 
|  | if (i == periods - 1 && pos_adj) | 
|  | ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), | 
|  | azx_dev, &bdl, ofs, | 
|  | period_bytes - pos_adj, 0); | 
|  | else | 
|  | ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), | 
|  | azx_dev, &bdl, ofs, | 
|  | period_bytes, | 
|  | !azx_dev->no_period_wakeup); | 
|  | if (ofs < 0) | 
|  | goto error; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | dev_err(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", | 
|  | azx_dev->bufsize, period_bytes); | 
|  | return -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_set_params - set stream parameters | 
|  | * @azx_dev: HD-audio core stream for which parameters are to be set | 
|  | * @format_val: format value parameter | 
|  | * | 
|  | * Setup the HD-audio core stream parameters from substream of the stream | 
|  | * and passed format value | 
|  | */ | 
|  | int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, | 
|  | unsigned int format_val) | 
|  | { | 
|  |  | 
|  | unsigned int bufsize, period_bytes; | 
|  | struct snd_pcm_substream *substream = azx_dev->substream; | 
|  | struct snd_pcm_runtime *runtime; | 
|  | int err; | 
|  |  | 
|  | if (!substream) | 
|  | return -EINVAL; | 
|  | runtime = substream->runtime; | 
|  | bufsize = snd_pcm_lib_buffer_bytes(substream); | 
|  | period_bytes = snd_pcm_lib_period_bytes(substream); | 
|  |  | 
|  | if (bufsize != azx_dev->bufsize || | 
|  | period_bytes != azx_dev->period_bytes || | 
|  | format_val != azx_dev->format_val || | 
|  | runtime->no_period_wakeup != azx_dev->no_period_wakeup) { | 
|  | azx_dev->bufsize = bufsize; | 
|  | azx_dev->period_bytes = period_bytes; | 
|  | azx_dev->format_val = format_val; | 
|  | azx_dev->no_period_wakeup = runtime->no_period_wakeup; | 
|  | err = snd_hdac_stream_setup_periods(azx_dev); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); | 
|  |  | 
|  | static u64 azx_cc_read(const struct cyclecounter *cc) | 
|  | { | 
|  | struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); | 
|  |  | 
|  | return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); | 
|  | } | 
|  |  | 
|  | static void azx_timecounter_init(struct hdac_stream *azx_dev, | 
|  | bool force, u64 last) | 
|  | { | 
|  | struct timecounter *tc = &azx_dev->tc; | 
|  | struct cyclecounter *cc = &azx_dev->cc; | 
|  | u64 nsec; | 
|  |  | 
|  | cc->read = azx_cc_read; | 
|  | cc->mask = CLOCKSOURCE_MASK(32); | 
|  |  | 
|  | /* | 
|  | * Converting from 24 MHz to ns means applying a 125/3 factor. | 
|  | * To avoid any saturation issues in intermediate operations, | 
|  | * the 125 factor is applied first. The division is applied | 
|  | * last after reading the timecounter value. | 
|  | * Applying the 1/3 factor as part of the multiplication | 
|  | * requires at least 20 bits for a decent precision, however | 
|  | * overflows occur after about 4 hours or less, not a option. | 
|  | */ | 
|  |  | 
|  | cc->mult = 125; /* saturation after 195 years */ | 
|  | cc->shift = 0; | 
|  |  | 
|  | nsec = 0; /* audio time is elapsed time since trigger */ | 
|  | timecounter_init(tc, cc, nsec); | 
|  | if (force) { | 
|  | /* | 
|  | * force timecounter to use predefined value, | 
|  | * used for synchronized starts | 
|  | */ | 
|  | tc->cycle_last = last; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_timecounter_init - initialize time counter | 
|  | * @azx_dev: HD-audio core stream (master stream) | 
|  | * @streams: bit flags of streams to set up | 
|  | * | 
|  | * Initializes the time counter of streams marked by the bit flags (each | 
|  | * bit corresponds to the stream index). | 
|  | * The trigger timestamp of PCM substream assigned to the given stream is | 
|  | * updated accordingly, too. | 
|  | */ | 
|  | void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, | 
|  | unsigned int streams) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; | 
|  | struct hdac_stream *s; | 
|  | bool inited = false; | 
|  | u64 cycle_last = 0; | 
|  | int i = 0; | 
|  |  | 
|  | list_for_each_entry(s, &bus->stream_list, list) { | 
|  | if (streams & (1 << i)) { | 
|  | azx_timecounter_init(s, inited, cycle_last); | 
|  | if (!inited) { | 
|  | inited = true; | 
|  | cycle_last = s->tc.cycle_last; | 
|  | } | 
|  | } | 
|  | i++; | 
|  | } | 
|  |  | 
|  | snd_pcm_gettime(runtime, &runtime->trigger_tstamp); | 
|  | runtime->trigger_tstamp_latched = true; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_sync_trigger - turn on/off stream sync register | 
|  | * @azx_dev: HD-audio core stream (master stream) | 
|  | * @streams: bit flags of streams to sync | 
|  | */ | 
|  | void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, | 
|  | unsigned int streams, unsigned int reg) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | unsigned int val; | 
|  |  | 
|  | if (!reg) | 
|  | reg = AZX_REG_SSYNC; | 
|  | val = _snd_hdac_chip_readl(bus, reg); | 
|  | if (set) | 
|  | val |= streams; | 
|  | else | 
|  | val &= ~streams; | 
|  | _snd_hdac_chip_writel(bus, reg, val); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_stream_sync - sync with start/strop trigger operation | 
|  | * @azx_dev: HD-audio core stream (master stream) | 
|  | * @start: true = start, false = stop | 
|  | * @streams: bit flags of streams to sync | 
|  | * | 
|  | * For @start = true, wait until all FIFOs get ready. | 
|  | * For @start = false, wait until all RUN bits are cleared. | 
|  | */ | 
|  | void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, | 
|  | unsigned int streams) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | int i, nwait, timeout; | 
|  | struct hdac_stream *s; | 
|  |  | 
|  | for (timeout = 5000; timeout; timeout--) { | 
|  | nwait = 0; | 
|  | i = 0; | 
|  | list_for_each_entry(s, &bus->stream_list, list) { | 
|  | if (streams & (1 << i)) { | 
|  | if (start) { | 
|  | /* check FIFO gets ready */ | 
|  | if (!(snd_hdac_stream_readb(s, SD_STS) & | 
|  | SD_STS_FIFO_READY)) | 
|  | nwait++; | 
|  | } else { | 
|  | /* check RUN bit is cleared */ | 
|  | if (snd_hdac_stream_readb(s, SD_CTL) & | 
|  | SD_CTL_DMA_START) | 
|  | nwait++; | 
|  | } | 
|  | } | 
|  | i++; | 
|  | } | 
|  | if (!nwait) | 
|  | break; | 
|  | cpu_relax(); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); | 
|  |  | 
|  | #ifdef CONFIG_SND_HDA_DSP_LOADER | 
|  | /** | 
|  | * snd_hdac_dsp_prepare - prepare for DSP loading | 
|  | * @azx_dev: HD-audio core stream used for DSP loading | 
|  | * @format: HD-audio stream format | 
|  | * @byte_size: data chunk byte size | 
|  | * @bufp: allocated buffer | 
|  | * | 
|  | * Allocate the buffer for the given size and set up the given stream for | 
|  | * DSP loading.  Returns the stream tag (>= 0), or a negative error code. | 
|  | */ | 
|  | int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, | 
|  | unsigned int byte_size, struct snd_dma_buffer *bufp) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  | __le32 *bdl; | 
|  | int err; | 
|  |  | 
|  | snd_hdac_dsp_lock(azx_dev); | 
|  | spin_lock_irq(&bus->reg_lock); | 
|  | if (azx_dev->running || azx_dev->locked) { | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  | err = -EBUSY; | 
|  | goto unlock; | 
|  | } | 
|  | azx_dev->locked = true; | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  |  | 
|  | err = bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV_SG, | 
|  | byte_size, bufp); | 
|  | if (err < 0) | 
|  | goto err_alloc; | 
|  |  | 
|  | azx_dev->substream = NULL; | 
|  | azx_dev->bufsize = byte_size; | 
|  | azx_dev->period_bytes = byte_size; | 
|  | azx_dev->format_val = format; | 
|  |  | 
|  | snd_hdac_stream_reset(azx_dev); | 
|  |  | 
|  | /* reset BDL address */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | 
|  |  | 
|  | azx_dev->frags = 0; | 
|  | bdl = (__le32 *)azx_dev->bdl.area; | 
|  | err = setup_bdle(bus, bufp, azx_dev, &bdl, 0, byte_size, 0); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | snd_hdac_stream_setup(azx_dev); | 
|  | snd_hdac_dsp_unlock(azx_dev); | 
|  | return azx_dev->stream_tag; | 
|  |  | 
|  | error: | 
|  | bus->io_ops->dma_free_pages(bus, bufp); | 
|  | err_alloc: | 
|  | spin_lock_irq(&bus->reg_lock); | 
|  | azx_dev->locked = false; | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  | unlock: | 
|  | snd_hdac_dsp_unlock(azx_dev); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_dsp_trigger - start / stop DSP loading | 
|  | * @azx_dev: HD-audio core stream used for DSP loading | 
|  | * @start: trigger start or stop | 
|  | */ | 
|  | void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) | 
|  | { | 
|  | if (start) | 
|  | snd_hdac_stream_start(azx_dev, true); | 
|  | else | 
|  | snd_hdac_stream_stop(azx_dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); | 
|  |  | 
|  | /** | 
|  | * snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal | 
|  | * @azx_dev: HD-audio core stream used for DSP loading | 
|  | * @dmab: buffer used by DSP loading | 
|  | */ | 
|  | void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, | 
|  | struct snd_dma_buffer *dmab) | 
|  | { | 
|  | struct hdac_bus *bus = azx_dev->bus; | 
|  |  | 
|  | if (!dmab->area || !azx_dev->locked) | 
|  | return; | 
|  |  | 
|  | snd_hdac_dsp_lock(azx_dev); | 
|  | /* reset BDL address */ | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | 
|  | snd_hdac_stream_writel(azx_dev, SD_CTL, 0); | 
|  | azx_dev->bufsize = 0; | 
|  | azx_dev->period_bytes = 0; | 
|  | azx_dev->format_val = 0; | 
|  |  | 
|  | bus->io_ops->dma_free_pages(bus, dmab); | 
|  | dmab->area = NULL; | 
|  |  | 
|  | spin_lock_irq(&bus->reg_lock); | 
|  | azx_dev->locked = false; | 
|  | spin_unlock_irq(&bus->reg_lock); | 
|  | snd_hdac_dsp_unlock(azx_dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); | 
|  | #endif /* CONFIG_SND_HDA_DSP_LOADER */ |