|  | /* | 
|  | * Copyright (C) 2010 Marvell International Ltd. | 
|  | *		Zhangfei Gao <zhangfei.gao@marvell.com> | 
|  | *		Kevin Wang <dwang4@marvell.com> | 
|  | *		Jun Nie <njun@marvell.com> | 
|  | *		Qiming Wu <wuqm@marvell.com> | 
|  | *		Philip Rakity <prakity@marvell.com> | 
|  | * | 
|  | * This software is licensed under the terms of the GNU General Public | 
|  | * License version 2, as published by the Free Software Foundation, and | 
|  | * may be copied, distributed, and modified under those terms. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/platform_data/pxa_sdhci.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  |  | 
|  | #include "sdhci.h" | 
|  | #include "sdhci-pltfm.h" | 
|  |  | 
|  | #define SD_FIFO_PARAM		0xe0 | 
|  | #define DIS_PAD_SD_CLK_GATE	0x0400 /* Turn on/off Dynamic SD Clock Gating */ | 
|  | #define CLK_GATE_ON		0x0200 /* Disable/enable Clock Gate */ | 
|  | #define CLK_GATE_CTL		0x0100 /* Clock Gate Control */ | 
|  | #define CLK_GATE_SETTING_BITS	(DIS_PAD_SD_CLK_GATE | \ | 
|  | CLK_GATE_ON | CLK_GATE_CTL) | 
|  |  | 
|  | #define SD_CLOCK_BURST_SIZE_SETUP	0xe6 | 
|  | #define SDCLK_SEL_SHIFT		8 | 
|  | #define SDCLK_SEL_MASK		0x3 | 
|  | #define SDCLK_DELAY_SHIFT	10 | 
|  | #define SDCLK_DELAY_MASK	0x3c | 
|  |  | 
|  | #define SD_CE_ATA_2		0xea | 
|  | #define MMC_CARD		0x1000 | 
|  | #define MMC_WIDTH		0x0100 | 
|  |  | 
|  | static void pxav2_reset(struct sdhci_host *host, u8 mask) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); | 
|  | struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; | 
|  |  | 
|  | sdhci_reset(host, mask); | 
|  |  | 
|  | if (mask == SDHCI_RESET_ALL) { | 
|  | u16 tmp = 0; | 
|  |  | 
|  | /* | 
|  | * tune timing of read data/command when crc error happen | 
|  | * no performance impact | 
|  | */ | 
|  | if (pdata && pdata->clk_delay_sel == 1) { | 
|  | tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); | 
|  |  | 
|  | tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT); | 
|  | tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) | 
|  | << SDCLK_DELAY_SHIFT; | 
|  | tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT); | 
|  | tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT; | 
|  |  | 
|  | writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); | 
|  | } | 
|  |  | 
|  | if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) { | 
|  | tmp = readw(host->ioaddr + SD_FIFO_PARAM); | 
|  | tmp &= ~CLK_GATE_SETTING_BITS; | 
|  | writew(tmp, host->ioaddr + SD_FIFO_PARAM); | 
|  | } else { | 
|  | tmp = readw(host->ioaddr + SD_FIFO_PARAM); | 
|  | tmp &= ~CLK_GATE_SETTING_BITS; | 
|  | tmp |= CLK_GATE_SETTING_BITS; | 
|  | writew(tmp, host->ioaddr + SD_FIFO_PARAM); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width) | 
|  | { | 
|  | u8 ctrl; | 
|  | u16 tmp; | 
|  |  | 
|  | ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); | 
|  | tmp = readw(host->ioaddr + SD_CE_ATA_2); | 
|  | if (width == MMC_BUS_WIDTH_8) { | 
|  | ctrl &= ~SDHCI_CTRL_4BITBUS; | 
|  | tmp |= MMC_CARD | MMC_WIDTH; | 
|  | } else { | 
|  | tmp &= ~(MMC_CARD | MMC_WIDTH); | 
|  | if (width == MMC_BUS_WIDTH_4) | 
|  | ctrl |= SDHCI_CTRL_4BITBUS; | 
|  | else | 
|  | ctrl &= ~SDHCI_CTRL_4BITBUS; | 
|  | } | 
|  | writew(tmp, host->ioaddr + SD_CE_ATA_2); | 
|  | writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); | 
|  | } | 
|  |  | 
|  | static const struct sdhci_ops pxav2_sdhci_ops = { | 
|  | .set_clock     = sdhci_set_clock, | 
|  | .get_max_clock = sdhci_pltfm_clk_get_max_clock, | 
|  | .set_bus_width = pxav2_mmc_set_bus_width, | 
|  | .reset         = pxav2_reset, | 
|  | .set_uhs_signaling = sdhci_set_uhs_signaling, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id sdhci_pxav2_of_match[] = { | 
|  | { | 
|  | .compatible = "mrvl,pxav2-mmc", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match); | 
|  |  | 
|  | static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) | 
|  | { | 
|  | struct sdhci_pxa_platdata *pdata; | 
|  | struct device_node *np = dev->of_node; | 
|  | u32 bus_width; | 
|  | u32 clk_delay_cycles; | 
|  |  | 
|  | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return NULL; | 
|  |  | 
|  | if (of_find_property(np, "non-removable", NULL)) | 
|  | pdata->flags |= PXA_FLAG_CARD_PERMANENT; | 
|  |  | 
|  | of_property_read_u32(np, "bus-width", &bus_width); | 
|  | if (bus_width == 8) | 
|  | pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT; | 
|  |  | 
|  | of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); | 
|  | if (clk_delay_cycles > 0) { | 
|  | pdata->clk_delay_sel = 1; | 
|  | pdata->clk_delay_cycles = clk_delay_cycles; | 
|  | } | 
|  |  | 
|  | return pdata; | 
|  | } | 
|  | #else | 
|  | static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int sdhci_pxav2_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct sdhci_pltfm_host *pltfm_host; | 
|  | struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct sdhci_host *host = NULL; | 
|  | const struct of_device_id *match; | 
|  |  | 
|  | int ret; | 
|  | struct clk *clk; | 
|  |  | 
|  | host = sdhci_pltfm_init(pdev, NULL, 0); | 
|  | if (IS_ERR(host)) | 
|  | return PTR_ERR(host); | 
|  |  | 
|  | pltfm_host = sdhci_priv(host); | 
|  |  | 
|  | clk = devm_clk_get(dev, "PXA-SDHCLK"); | 
|  | if (IS_ERR(clk)) { | 
|  | dev_err(dev, "failed to get io clock\n"); | 
|  | ret = PTR_ERR(clk); | 
|  | goto free; | 
|  | } | 
|  | pltfm_host->clk = clk; | 
|  | ret = clk_prepare_enable(clk); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "failed to enable io clock\n"); | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | host->quirks = SDHCI_QUIRK_BROKEN_ADMA | 
|  | | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | 
|  | | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; | 
|  |  | 
|  | match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev); | 
|  | if (match) { | 
|  | pdata = pxav2_get_mmc_pdata(dev); | 
|  | } | 
|  | if (pdata) { | 
|  | if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { | 
|  | /* on-chip device */ | 
|  | host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; | 
|  | host->mmc->caps |= MMC_CAP_NONREMOVABLE; | 
|  | } | 
|  |  | 
|  | /* If slot design supports 8 bit data, indicate this to MMC. */ | 
|  | if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) | 
|  | host->mmc->caps |= MMC_CAP_8_BIT_DATA; | 
|  |  | 
|  | if (pdata->quirks) | 
|  | host->quirks |= pdata->quirks; | 
|  | if (pdata->host_caps) | 
|  | host->mmc->caps |= pdata->host_caps; | 
|  | if (pdata->pm_caps) | 
|  | host->mmc->pm_caps |= pdata->pm_caps; | 
|  | } | 
|  |  | 
|  | host->ops = &pxav2_sdhci_ops; | 
|  |  | 
|  | ret = sdhci_add_host(host); | 
|  | if (ret) | 
|  | goto disable_clk; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | disable_clk: | 
|  | clk_disable_unprepare(clk); | 
|  | free: | 
|  | sdhci_pltfm_free(pdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct platform_driver sdhci_pxav2_driver = { | 
|  | .driver		= { | 
|  | .name	= "sdhci-pxav2", | 
|  | .of_match_table = of_match_ptr(sdhci_pxav2_of_match), | 
|  | .pm	= &sdhci_pltfm_pmops, | 
|  | }, | 
|  | .probe		= sdhci_pxav2_probe, | 
|  | .remove		= sdhci_pltfm_unregister, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(sdhci_pxav2_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("SDHCI driver for pxav2"); | 
|  | MODULE_AUTHOR("Marvell International Ltd."); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  |  |