|  | /* | 
|  | * RapidIO Tsi57x switch family support | 
|  | * | 
|  | * Copyright 2009-2010 Integrated Device Technology, Inc. | 
|  | * Alexandre Bounine <alexandre.bounine@idt.com> | 
|  | *  - Added EM support | 
|  | *  - Modified switch operations initialization. | 
|  | * | 
|  | * Copyright 2005 MontaVista Software, Inc. | 
|  | * Matt Porter <mporter@kernel.crashing.org> | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/rio.h> | 
|  | #include <linux/rio_drv.h> | 
|  | #include <linux/rio_ids.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/module.h> | 
|  | #include "../rio.h" | 
|  |  | 
|  | /* Global (broadcast) route registers */ | 
|  | #define SPBC_ROUTE_CFG_DESTID	0x10070 | 
|  | #define SPBC_ROUTE_CFG_PORT	0x10074 | 
|  |  | 
|  | /* Per port route registers */ | 
|  | #define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n) | 
|  | #define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n) | 
|  |  | 
|  | #define TSI578_SP_MODE(n)	(0x11004 + n*0x100) | 
|  | #define TSI578_SP_MODE_GLBL	0x10004 | 
|  | #define  TSI578_SP_MODE_PW_DIS	0x08000000 | 
|  | #define  TSI578_SP_MODE_LUT_512	0x01000000 | 
|  |  | 
|  | #define TSI578_SP_CTL_INDEP(n)	(0x13004 + n*0x100) | 
|  | #define TSI578_SP_LUT_PEINF(n)	(0x13010 + n*0x100) | 
|  | #define TSI578_SP_CS_TX(n)	(0x13014 + n*0x100) | 
|  | #define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100) | 
|  |  | 
|  | #define TSI578_GLBL_ROUTE_BASE	0x10078 | 
|  |  | 
|  | static int | 
|  | tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, | 
|  | u16 table, u16 route_destid, u8 route_port) | 
|  | { | 
|  | if (table == RIO_GLOBAL_TABLE) { | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPBC_ROUTE_CFG_DESTID, route_destid); | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPBC_ROUTE_CFG_PORT, route_port); | 
|  | } else { | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_DESTID(table), route_destid); | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_PORT(table), route_port); | 
|  | } | 
|  |  | 
|  | udelay(10); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, | 
|  | u16 table, u16 route_destid, u8 *route_port) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 result; | 
|  |  | 
|  | if (table == RIO_GLOBAL_TABLE) { | 
|  | /* Use local RT of the ingress port to avoid possible | 
|  | race condition */ | 
|  | rio_mport_read_config_32(mport, destid, hopcount, | 
|  | RIO_SWP_INFO_CAR, &result); | 
|  | table = (result & RIO_SWP_INFO_PORT_NUM_MASK); | 
|  | } | 
|  |  | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_DESTID(table), route_destid); | 
|  | rio_mport_read_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_PORT(table), &result); | 
|  |  | 
|  | *route_port = (u8)result; | 
|  | if (*route_port > 15) | 
|  | ret = -1; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, | 
|  | u16 table) | 
|  | { | 
|  | u32 route_idx; | 
|  | u32 lut_size; | 
|  |  | 
|  | lut_size = (mport->sys_size) ? 0x1ff : 0xff; | 
|  |  | 
|  | if (table == RIO_GLOBAL_TABLE) { | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPBC_ROUTE_CFG_DESTID, 0x80000000); | 
|  | for (route_idx = 0; route_idx <= lut_size; route_idx++) | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPBC_ROUTE_CFG_PORT, | 
|  | RIO_INVALID_ROUTE); | 
|  | } else { | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_DESTID(table), 0x80000000); | 
|  | for (route_idx = 0; route_idx <= lut_size; route_idx++) | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, | 
|  | u8 sw_domain) | 
|  | { | 
|  | u32 regval; | 
|  |  | 
|  | /* | 
|  | * Switch domain configuration operates only at global level | 
|  | */ | 
|  |  | 
|  | /* Turn off flat (LUT_512) mode */ | 
|  | rio_mport_read_config_32(mport, destid, hopcount, | 
|  | TSI578_SP_MODE_GLBL, ®val); | 
|  | rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL, | 
|  | regval & ~TSI578_SP_MODE_LUT_512); | 
|  | /* Set switch domain base */ | 
|  | rio_mport_write_config_32(mport, destid, hopcount, | 
|  | TSI578_GLBL_ROUTE_BASE, | 
|  | (u32)(sw_domain << 24)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, | 
|  | u8 *sw_domain) | 
|  | { | 
|  | u32 regval; | 
|  |  | 
|  | /* | 
|  | * Switch domain configuration operates only at global level | 
|  | */ | 
|  | rio_mport_read_config_32(mport, destid, hopcount, | 
|  | TSI578_GLBL_ROUTE_BASE, ®val); | 
|  |  | 
|  | *sw_domain = (u8)(regval >> 24); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_em_init(struct rio_dev *rdev) | 
|  | { | 
|  | u32 regval; | 
|  | int portnum; | 
|  |  | 
|  | pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); | 
|  |  | 
|  | for (portnum = 0; | 
|  | portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) { | 
|  | /* Make sure that Port-Writes are enabled (for all ports) */ | 
|  | rio_read_config_32(rdev, | 
|  | TSI578_SP_MODE(portnum), ®val); | 
|  | rio_write_config_32(rdev, | 
|  | TSI578_SP_MODE(portnum), | 
|  | regval & ~TSI578_SP_MODE_PW_DIS); | 
|  |  | 
|  | /* Clear all pending interrupts */ | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), | 
|  | ®val); | 
|  | rio_write_config_32(rdev, | 
|  | RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), | 
|  | regval & 0x07120214); | 
|  |  | 
|  | rio_read_config_32(rdev, | 
|  | TSI578_SP_INT_STATUS(portnum), ®val); | 
|  | rio_write_config_32(rdev, | 
|  | TSI578_SP_INT_STATUS(portnum), | 
|  | regval & 0x000700bd); | 
|  |  | 
|  | /* Enable all interrupts to allow ports to send a port-write */ | 
|  | rio_read_config_32(rdev, | 
|  | TSI578_SP_CTL_INDEP(portnum), ®val); | 
|  | rio_write_config_32(rdev, | 
|  | TSI578_SP_CTL_INDEP(portnum), | 
|  | regval | 0x000b0000); | 
|  |  | 
|  | /* Skip next (odd) port if the current port is in x4 mode */ | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), | 
|  | ®val); | 
|  | if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) | 
|  | portnum++; | 
|  | } | 
|  |  | 
|  | /* set TVAL = ~50us */ | 
|  | rio_write_config_32(rdev, | 
|  | rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) | 
|  | { | 
|  | struct rio_mport *mport = rdev->net->hport; | 
|  | u32 intstat, err_status; | 
|  | int sendcount, checkcount; | 
|  | u8 route_port; | 
|  | u32 regval; | 
|  |  | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), | 
|  | &err_status); | 
|  |  | 
|  | if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && | 
|  | (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | | 
|  | RIO_PORT_N_ERR_STS_INP_ES))) { | 
|  | /* Remove any queued packets by locking/unlocking port */ | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), | 
|  | ®val); | 
|  | if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { | 
|  | rio_write_config_32(rdev, | 
|  | RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), | 
|  | regval | RIO_PORT_N_CTL_LOCKOUT); | 
|  | udelay(50); | 
|  | rio_write_config_32(rdev, | 
|  | RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), | 
|  | regval); | 
|  | } | 
|  |  | 
|  | /* Read from link maintenance response register to clear | 
|  | * valid bit | 
|  | */ | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum), | 
|  | ®val); | 
|  |  | 
|  | /* Send a Packet-Not-Accepted/Link-Request-Input-Status control | 
|  | * symbol to recover from IES/OES | 
|  | */ | 
|  | sendcount = 3; | 
|  | while (sendcount) { | 
|  | rio_write_config_32(rdev, | 
|  | TSI578_SP_CS_TX(portnum), 0x40fc8000); | 
|  | checkcount = 3; | 
|  | while (checkcount--) { | 
|  | udelay(50); | 
|  | rio_read_config_32(rdev, | 
|  | RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, | 
|  | portnum), | 
|  | ®val); | 
|  | if (regval & RIO_PORT_N_MNT_RSP_RVAL) | 
|  | goto exit_es; | 
|  | } | 
|  |  | 
|  | sendcount--; | 
|  | } | 
|  | } | 
|  |  | 
|  | exit_es: | 
|  | /* Clear implementation specific error status bits */ | 
|  | rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat); | 
|  | pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n", | 
|  | rdev->destid, rdev->hopcount, portnum, intstat); | 
|  |  | 
|  | if (intstat & 0x10000) { | 
|  | rio_read_config_32(rdev, | 
|  | TSI578_SP_LUT_PEINF(portnum), ®val); | 
|  | regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24); | 
|  | route_port = rdev->rswitch->route_table[regval]; | 
|  | pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n", | 
|  | rio_name(rdev), portnum, regval); | 
|  | tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount, | 
|  | RIO_GLOBAL_TABLE, regval, route_port); | 
|  | } | 
|  |  | 
|  | rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum), | 
|  | intstat & 0x000700bd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct rio_switch_ops tsi57x_switch_ops = { | 
|  | .owner = THIS_MODULE, | 
|  | .add_entry = tsi57x_route_add_entry, | 
|  | .get_entry = tsi57x_route_get_entry, | 
|  | .clr_table = tsi57x_route_clr_table, | 
|  | .set_domain = tsi57x_set_domain, | 
|  | .get_domain = tsi57x_get_domain, | 
|  | .em_init = tsi57x_em_init, | 
|  | .em_handle = tsi57x_em_handler, | 
|  | }; | 
|  |  | 
|  | static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id) | 
|  | { | 
|  | pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); | 
|  |  | 
|  | spin_lock(&rdev->rswitch->lock); | 
|  |  | 
|  | if (rdev->rswitch->ops) { | 
|  | spin_unlock(&rdev->rswitch->lock); | 
|  | return -EINVAL; | 
|  | } | 
|  | rdev->rswitch->ops = &tsi57x_switch_ops; | 
|  |  | 
|  | if (rdev->do_enum) { | 
|  | /* Ensure that default routing is disabled on startup */ | 
|  | rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, | 
|  | RIO_INVALID_ROUTE); | 
|  | } | 
|  |  | 
|  | spin_unlock(&rdev->rswitch->lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tsi57x_remove(struct rio_dev *rdev) | 
|  | { | 
|  | pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); | 
|  | spin_lock(&rdev->rswitch->lock); | 
|  | if (rdev->rswitch->ops != &tsi57x_switch_ops) { | 
|  | spin_unlock(&rdev->rswitch->lock); | 
|  | return; | 
|  | } | 
|  | rdev->rswitch->ops = NULL; | 
|  | spin_unlock(&rdev->rswitch->lock); | 
|  | } | 
|  |  | 
|  | static const struct rio_device_id tsi57x_id_table[] = { | 
|  | {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)}, | 
|  | {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)}, | 
|  | {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)}, | 
|  | {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)}, | 
|  | { 0, }	/* terminate list */ | 
|  | }; | 
|  |  | 
|  | static struct rio_driver tsi57x_driver = { | 
|  | .name = "tsi57x", | 
|  | .id_table = tsi57x_id_table, | 
|  | .probe = tsi57x_probe, | 
|  | .remove = tsi57x_remove, | 
|  | }; | 
|  |  | 
|  | static int __init tsi57x_init(void) | 
|  | { | 
|  | return rio_register_driver(&tsi57x_driver); | 
|  | } | 
|  |  | 
|  | static void __exit tsi57x_exit(void) | 
|  | { | 
|  | rio_unregister_driver(&tsi57x_driver); | 
|  | } | 
|  |  | 
|  | device_initcall(tsi57x_init); | 
|  | module_exit(tsi57x_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver"); | 
|  | MODULE_AUTHOR("Integrated Device Technology, Inc."); | 
|  | MODULE_LICENSE("GPL"); |