src/kernel/linux/v4.19/drivers/usb/host/ehci-pci.c - T800 - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * EHCI HCD (Host Controller Driver) PCI Bus Glue.
  *
  * Copyright (c) 2000-2004 by David Brownell
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>

 #include "ehci.h"
 #include "pci-quirks.h"

 #define DRIVER_DESC "EHCI PCI platform driver"

 static const char hcd_name[] = "ehci-pci";

 /* defined here to avoid adding to pci_ids.h for single instance use */
 #define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70

 /*-------------------------------------------------------------------------*/
 #define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939
 static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
 {
 	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
 }

 /*
  * This is the list of PCI IDs for the devices that have EHCI USB class and
  * specific drivers for that. One of the example is a ChipIdea device installed
  * on some Intel MID platforms.
  */
 static const struct pci_device_id bypass_pci_id_table[] = {
 	/* ChipIdea on Intel MID platform */
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
 	{}
 };

 static inline bool is_bypassed_id(struct pci_dev *pdev)
 {
 	return !!pci_match_id(bypass_pci_id_table, pdev);
 }

 /*
  * 0x84 is the offset of in/out threshold register,
  * and it is the same offset as the register of 'hostpc'.
  */
 #define	intel_quark_x1000_insnreg01	hostpc

 /* Maximum usable threshold value is 0x7f dwords for both IN and OUT */
 #define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD	0x007f007f

 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 {
 	int			retval;

 	/* we expect static quirk code to handle the "extended capabilities"
 	 * (currently just BIOS handoff) allowed starting with EHCI 0.96
 	 */

 	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
 	retval = pci_set_mwi(pdev);
 	if (!retval)
 		ehci_dbg(ehci, "MWI active\n");

 	/* Reset the threshold limit */
 	if (is_intel_quark_x1000(pdev)) {
 		/*
 		 * For the Intel QUARK X1000, raise the I/O threshold to the
 		 * maximum usable value in order to improve performance.
 		 */
 		ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
 			ehci->regs->intel_quark_x1000_insnreg01);
 	}

 	return 0;
 }

 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	u32			temp;
 	int			retval;

 	ehci->caps = hcd->regs;

 	/*
 	 * ehci_init() causes memory for DMA transfers to be
 	 * allocated.  Thus, any vendor-specific workarounds based on
 	 * limiting the type of memory used for DMA transfers must
 	 * happen before ehci_setup() is called.
 	 *
 	 * Most other workarounds can be done either before or after
 	 * init and reset; they are located here too.
 	 */
 	switch (pdev->vendor) {
 	case PCI_VENDOR_ID_TOSHIBA_2:
 		/* celleb's companion chip */
 		if (pdev->device == 0x01b5) {
 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
 			ehci->big_endian_mmio = 1;
 #else
 			ehci_warn(ehci,
 				  "unsupported big endian Toshiba quirk\n");
 #endif
 		}
 		break;
 	case PCI_VENDOR_ID_NVIDIA:
 		/* NVidia reports that certain chips don't handle
 		 * QH, ITD, or SITD addresses above 2GB.  (But TD,
 		 * data buffer, and periodic schedule are normal.)
 		 */
 		switch (pdev->device) {
 		case 0x003c:	/* MCP04 */
 		case 0x005b:	/* CK804 */
 		case 0x00d8:	/* CK8 */
 		case 0x00e8:	/* CK8S */
 			if (pci_set_consistent_dma_mask(pdev,
 						DMA_BIT_MASK(31)) < 0)
 				ehci_warn(ehci, "can't enable NVidia "
 					"workaround for >2GB RAM\n");
 			break;

 		/* Some NForce2 chips have problems with selective suspend;
 		 * fixed in newer silicon.
 		 */
 		case 0x0068:
 			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
 		}
 		break;
 	case PCI_VENDOR_ID_INTEL:
 		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
 			hcd->has_tt = 1;
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI)
 			hcd->has_tt = 1;
 		break;
 	case PCI_VENDOR_ID_AMD:
 		/* AMD PLL quirk */
 		if (usb_amd_find_chipset_info())
 			ehci->amd_pll_fix = 1;
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
 			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
 			retval = -EIO;
 			goto done;
 		}

 		/*
 		 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
 		 * read/write memory space which does not belong to it when
 		 * there is NULL pointer with T-bit set to 1 in the frame list
 		 * table. To avoid the issue, the frame list link pointer
 		 * should always contain a valid pointer to a inactive qh.
 		 */
 		if (pdev->device == 0x7808) {
 			ehci->use_dummy_qh = 1;
 			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
 		}
 		break;
 	case PCI_VENDOR_ID_VIA:
 		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
 			u8 tmp;

 			/* The VT6212 defaults to a 1 usec EHCI sleep time which
 			 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
 			 * that sleep time use the conventional 10 usec.
 			 */
 			pci_read_config_byte(pdev, 0x4b, &tmp);
 			if (tmp & 0x20)
 				break;
 			pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
 		}
 		break;
 	case PCI_VENDOR_ID_ATI:
 		/* AMD PLL quirk */
 		if (usb_amd_find_chipset_info())
 			ehci->amd_pll_fix = 1;

 		/*
 		 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
 		 * read/write memory space which does not belong to it when
 		 * there is NULL pointer with T-bit set to 1 in the frame list
 		 * table. To avoid the issue, the frame list link pointer
 		 * should always contain a valid pointer to a inactive qh.
 		 */
 		if (pdev->device == 0x4396) {
 			ehci->use_dummy_qh = 1;
 			ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
 		}
 		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
 		if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
 				usb_amd_hang_symptom_quirk()) {
 			u8 tmp;
 			ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
 			pci_read_config_byte(pdev, 0x53, &tmp);
 			pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
 		}
 		break;
 	case PCI_VENDOR_ID_NETMOS:
 		/* MosChip frame-index-register bug */
 		ehci_info(ehci, "applying MosChip frame-index workaround\n");
 		ehci->frame_index_bug = 1;
 		break;
 	}

 	/* optional debug port, normally in the first BAR */
 	temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
 	if (temp) {
 		pci_read_config_dword(pdev, temp, &temp);
 		temp >>= 16;
 		if (((temp >> 13) & 7) == 1) {
 			u32 hcs_params = ehci_readl(ehci,
 						    &ehci->caps->hcs_params);

 			temp &= 0x1fff;
 			ehci->debug = hcd->regs + temp;
 			temp = ehci_readl(ehci, &ehci->debug->control);
 			ehci_info(ehci, "debug port %d%s\n",
 				  HCS_DEBUG_PORT(hcs_params),
 				  (temp & DBGP_ENABLED) ? " IN USE" : "");
 			if (!(temp & DBGP_ENABLED))
 				ehci->debug = NULL;
 		}
 	}

 	retval = ehci_setup(hcd);
 	if (retval)
 		return retval;

 	/* These workarounds need to be applied after ehci_setup() */
 	switch (pdev->vendor) {
 	case PCI_VENDOR_ID_NEC:
 	case PCI_VENDOR_ID_INTEL:
 	case PCI_VENDOR_ID_AMD:
 		ehci->need_io_watchdog = 0;
 		break;
 	case PCI_VENDOR_ID_NVIDIA:
 		switch (pdev->device) {
 		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
 		 * fetching device descriptors unless LPM is disabled.
 		 * There are also intermittent problems enumerating
 		 * devices with PPCD enabled.
 		 */
 		case 0x0d9d:
 			ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
 			ehci->has_ppcd = 0;
 			ehci->command &= ~CMD_PPCEE;
 			break;
 		}
 		break;
 	}

 	/* at least the Genesys GL880S needs fixup here */
 	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
 	temp &= 0x0f;
 	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
 		ehci_dbg(ehci, "bogus port configuration: "
 			"cc=%d x pcc=%d < ports=%d\n",
 			HCS_N_CC(ehci->hcs_params),
 			HCS_N_PCC(ehci->hcs_params),
 			HCS_N_PORTS(ehci->hcs_params));

 		switch (pdev->vendor) {
 		case 0x17a0:		/* GENESYS */
 			/* GL880S: should be PORTS=2 */
 			temp |= (ehci->hcs_params & ~0xf);
 			ehci->hcs_params = temp;
 			break;
 		case PCI_VENDOR_ID_NVIDIA:
 			/* NF4: should be PCC=10 */
 			break;
 		}
 	}

 	/* Serial Bus Release Number is at PCI 0x60 offset */
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
 	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
 		;	/* ConneXT has no sbrn register */
 	else
 		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);

 	/* Keep this around for a while just in case some EHCI
 	 * implementation uses legacy PCI PM support.  This test
 	 * can be removed on 17 Dec 2009 if the dev_warn() hasn't
 	 * been triggered by then.
 	 */
 	if (!device_can_wakeup(&pdev->dev)) {
 		u16	port_wake;

 		pci_read_config_word(pdev, 0x62, &port_wake);
 		if (port_wake & 0x0001) {
 			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
 			device_set_wakeup_capable(&pdev->dev, 1);
 		}
 	}

 #ifdef	CONFIG_PM
 	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
 		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 #endif

 	retval = ehci_pci_reinit(ehci, pdev);
 done:
 	return retval;
 }

 /*-------------------------------------------------------------------------*/

 #ifdef	CONFIG_PM

 /* suspend/resume, section 4.3 */

 /* These routines rely on the PCI bus glue
  * to handle powerdown and wakeup, and currently also on
  * transceivers that don't need any software attention to set up
  * the right sort of wakeup.
  * Also they depend on separate root hub suspend/resume.
  */

 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);

 	if (ehci_resume(hcd, hibernated) != 0)
 		(void) ehci_pci_reinit(ehci, pdev);
 	return 0;
 }

 #else

 #define ehci_suspend		NULL
 #define ehci_pci_resume		NULL
 #endif	/* CONFIG_PM */

 static struct hc_driver __read_mostly ehci_pci_hc_driver;

 static const struct ehci_driver_overrides pci_overrides __initconst = {
 	.reset =		ehci_pci_setup,
 };

 /*-------------------------------------------------------------------------*/

 static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	if (is_bypassed_id(pdev))
 		return -ENODEV;
 	return usb_hcd_pci_probe(pdev, id);
 }

 static void ehci_pci_remove(struct pci_dev *pdev)
 {
 	pci_clear_mwi(pdev);
 	usb_hcd_pci_remove(pdev);
 }

 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
 	}, {
 	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
 	.driver_data = (unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);

 /* pci driver glue; this is a "new style" PCI driver module */
 static struct pci_driver ehci_pci_driver = {
 	.name =		(char *) hcd_name,
 	.id_table =	pci_ids,

 	.probe =	ehci_pci_probe,
 	.remove =	ehci_pci_remove,
 	.shutdown = 	usb_hcd_pci_shutdown,

 #ifdef CONFIG_PM
 	.driver =	{
 		.pm =	&usb_hcd_pci_pm_ops
 	},
 #endif
 };

 static int __init ehci_pci_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;

 	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

 	ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);

 	/* Entries for the PCI suspend/resume callbacks are special */
 	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
 	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;

 	return pci_register_driver(&ehci_pci_driver);
 }
 module_init(ehci_pci_init);

 static void __exit ehci_pci_cleanup(void)
 {
 	pci_unregister_driver(&ehci_pci_driver);
 }
 module_exit(ehci_pci_cleanup);

 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("David Brownell");
 MODULE_AUTHOR("Alan Stern");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* EHCI HCD (Host Controller Driver) PCI Bus Glue.
	*
	* Copyright (c) 2000-2004 by David Brownell
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/usb.h>
	#include <linux/usb/hcd.h>

	#include "ehci.h"
	#include "pci-quirks.h"

	#define DRIVER_DESC "EHCI PCI platform driver"

	static const char hcd_name[] = "ehci-pci";

	/* defined here to avoid adding to pci_ids.h for single instance use */
	#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70

	/-------------------------------------------------------------------------/
	#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939
	static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
	{
	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
	pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
	}

	/*
	* This is the list of PCI IDs for the devices that have EHCI USB class and
	* specific drivers for that. One of the example is a ChipIdea device installed
	* on some Intel MID platforms.
	*/
	static const struct pci_device_id bypass_pci_id_table[] = {
	/* ChipIdea on Intel MID platform */
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
	{}
	};

	static inline bool is_bypassed_id(struct pci_dev *pdev)
	{
	return !!pci_match_id(bypass_pci_id_table, pdev);
	}

	/*
	* 0x84 is the offset of in/out threshold register,
	* and it is the same offset as the register of 'hostpc'.
	*/
	#define intel_quark_x1000_insnreg01 hostpc

	/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */
	#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f

	/* called after powerup, by probe or system-pm "wakeup" */
	static int ehci_pci_reinit(struct ehci_hcd ehci, struct pci_dev pdev)
	{
	int retval;

	/* we expect static quirk code to handle the "extended capabilities"
	* (currently just BIOS handoff) allowed starting with EHCI 0.96
	*/

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	retval = pci_set_mwi(pdev);
	if (!retval)
	ehci_dbg(ehci, "MWI active\n");

	/* Reset the threshold limit */
	if (is_intel_quark_x1000(pdev)) {
	/*
	* For the Intel QUARK X1000, raise the I/O threshold to the
	* maximum usable value in order to improve performance.
	*/
	ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
	ehci->regs->intel_quark_x1000_insnreg01);
	}

	return 0;
	}

	/* called during probe() after chip reset completes */
	static int ehci_pci_setup(struct usb_hcd *hcd)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	u32 temp;
	int retval;

	ehci->caps = hcd->regs;

	/*
	* ehci_init() causes memory for DMA transfers to be
	* allocated. Thus, any vendor-specific workarounds based on
	* limiting the type of memory used for DMA transfers must
	* happen before ehci_setup() is called.
	*
	* Most other workarounds can be done either before or after
	* init and reset; they are located here too.
	*/
	switch (pdev->vendor) {
	case PCI_VENDOR_ID_TOSHIBA_2:
	/* celleb's companion chip */
	if (pdev->device == 0x01b5) {
	#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
	ehci->big_endian_mmio = 1;
	#else
	ehci_warn(ehci,
	"unsupported big endian Toshiba quirk\n");
	#endif
	}
	break;
	case PCI_VENDOR_ID_NVIDIA:
	/* NVidia reports that certain chips don't handle
	* QH, ITD, or SITD addresses above 2GB. (But TD,
	* data buffer, and periodic schedule are normal.)
	*/
	switch (pdev->device) {
	case 0x003c: /* MCP04 */
	case 0x005b: /* CK804 */
	case 0x00d8: /* CK8 */
	case 0x00e8: /* CK8S */
	if (pci_set_consistent_dma_mask(pdev,
	DMA_BIT_MASK(31)) < 0)
	ehci_warn(ehci, "can't enable NVidia "
	"workaround for >2GB RAM\n");
	break;

	/* Some NForce2 chips have problems with selective suspend;
	* fixed in newer silicon.
	*/
	case 0x0068:
	if (pdev->revision < 0xa4)
	ehci->no_selective_suspend = 1;
	break;
	}
	break;
	case PCI_VENDOR_ID_INTEL:
	if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
	hcd->has_tt = 1;
	break;
	case PCI_VENDOR_ID_TDI:
	if (pdev->device == PCI_DEVICE_ID_TDI_EHCI)
	hcd->has_tt = 1;
	break;
	case PCI_VENDOR_ID_AMD:
	/* AMD PLL quirk */
	if (usb_amd_find_chipset_info())
	ehci->amd_pll_fix = 1;
	/* AMD8111 EHCI doesn't work, according to AMD errata */
	if (pdev->device == 0x7463) {
	ehci_info(ehci, "ignoring AMD8111 (errata)\n");
	retval = -EIO;
	goto done;
	}

	/*
	* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
	* read/write memory space which does not belong to it when
	* there is NULL pointer with T-bit set to 1 in the frame list
	* table. To avoid the issue, the frame list link pointer
	* should always contain a valid pointer to a inactive qh.
	*/
	if (pdev->device == 0x7808) {
	ehci->use_dummy_qh = 1;
	ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
	}
	break;
	case PCI_VENDOR_ID_VIA:
	if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
	u8 tmp;

	/* The VT6212 defaults to a 1 usec EHCI sleep time which
	* hogs the PCI bus badly. Setting bit 5 of 0x4B makes
	* that sleep time use the conventional 10 usec.
	*/
	pci_read_config_byte(pdev, 0x4b, &tmp);
	if (tmp & 0x20)
	break;
	pci_write_config_byte(pdev, 0x4b, tmp \| 0x20);
	}
	break;
	case PCI_VENDOR_ID_ATI:
	/* AMD PLL quirk */
	if (usb_amd_find_chipset_info())
	ehci->amd_pll_fix = 1;

	/*
	* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
	* read/write memory space which does not belong to it when
	* there is NULL pointer with T-bit set to 1 in the frame list
	* table. To avoid the issue, the frame list link pointer
	* should always contain a valid pointer to a inactive qh.
	*/
	if (pdev->device == 0x4396) {
	ehci->use_dummy_qh = 1;
	ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
	}
	/* SB600 and old version of SB700 have a bug in EHCI controller,
	* which causes usb devices lose response in some cases.
	*/
	if ((pdev->device == 0x4386 \|\| pdev->device == 0x4396) &&
	usb_amd_hang_symptom_quirk()) {
	u8 tmp;
	ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
	pci_read_config_byte(pdev, 0x53, &tmp);
	pci_write_config_byte(pdev, 0x53, tmp \| (1<<3));
	}
	break;
	case PCI_VENDOR_ID_NETMOS:
	/* MosChip frame-index-register bug */
	ehci_info(ehci, "applying MosChip frame-index workaround\n");
	ehci->frame_index_bug = 1;
	break;
	}

	/* optional debug port, normally in the first BAR */
	temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
	if (temp) {
	pci_read_config_dword(pdev, temp, &temp);
	temp >>= 16;
	if (((temp >> 13) & 7) == 1) {
	u32 hcs_params = ehci_readl(ehci,
	&ehci->caps->hcs_params);

	temp &= 0x1fff;
	ehci->debug = hcd->regs + temp;
	temp = ehci_readl(ehci, &ehci->debug->control);
	ehci_info(ehci, "debug port %d%s\n",
	HCS_DEBUG_PORT(hcs_params),
	(temp & DBGP_ENABLED) ? " IN USE" : "");
	if (!(temp & DBGP_ENABLED))
	ehci->debug = NULL;
	}
	}

	retval = ehci_setup(hcd);
	if (retval)
	return retval;

	/* These workarounds need to be applied after ehci_setup() */
	switch (pdev->vendor) {
	case PCI_VENDOR_ID_NEC:
	case PCI_VENDOR_ID_INTEL:
	case PCI_VENDOR_ID_AMD:
	ehci->need_io_watchdog = 0;
	break;
	case PCI_VENDOR_ID_NVIDIA:
	switch (pdev->device) {
	/* MCP89 chips on the MacBookAir3,1 give EPROTO when
	* fetching device descriptors unless LPM is disabled.
	* There are also intermittent problems enumerating
	* devices with PPCD enabled.
	*/
	case 0x0d9d:
	ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
	ehci->has_ppcd = 0;
	ehci->command &= ~CMD_PPCEE;
	break;
	}
	break;
	}

	/* at least the Genesys GL880S needs fixup here */
	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
	temp &= 0x0f;
	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
	ehci_dbg(ehci, "bogus port configuration: "
	"cc=%d x pcc=%d < ports=%d\n",
	HCS_N_CC(ehci->hcs_params),
	HCS_N_PCC(ehci->hcs_params),
	HCS_N_PORTS(ehci->hcs_params));

	switch (pdev->vendor) {
	case 0x17a0: /* GENESYS */
	/* GL880S: should be PORTS=2 */
	temp \|= (ehci->hcs_params & ~0xf);
	ehci->hcs_params = temp;
	break;
	case PCI_VENDOR_ID_NVIDIA:
	/* NF4: should be PCC=10 */
	break;
	}
	}

	/* Serial Bus Release Number is at PCI 0x60 offset */
	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
	&& pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
	; /* ConneXT has no sbrn register */
	else
	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);

	/* Keep this around for a while just in case some EHCI
	* implementation uses legacy PCI PM support. This test
	* can be removed on 17 Dec 2009 if the dev_warn() hasn't
	* been triggered by then.
	*/
	if (!device_can_wakeup(&pdev->dev)) {
	u16 port_wake;

	pci_read_config_word(pdev, 0x62, &port_wake);
	if (port_wake & 0x0001) {
	dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
	device_set_wakeup_capable(&pdev->dev, 1);
	}
	}

	#ifdef CONFIG_PM
	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
	ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
	#endif

	retval = ehci_pci_reinit(ehci, pdev);
	done:
	return retval;
	}

	/-------------------------------------------------------------------------/

	#ifdef CONFIG_PM

	/* suspend/resume, section 4.3 */

	/* These routines rely on the PCI bus glue
	* to handle powerdown and wakeup, and currently also on
	* transceivers that don't need any software attention to set up
	* the right sort of wakeup.
	* Also they depend on separate root hub suspend/resume.
	*/

	static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);

	if (ehci_resume(hcd, hibernated) != 0)
	(void) ehci_pci_reinit(ehci, pdev);
	return 0;
	}

	#else

	#define ehci_suspend NULL
	#define ehci_pci_resume NULL
	#endif /* CONFIG_PM */

	static struct hc_driver __read_mostly ehci_pci_hc_driver;

	static const struct ehci_driver_overrides pci_overrides __initconst = {
	.reset = ehci_pci_setup,
	};

	/-------------------------------------------------------------------------/

	static int ehci_pci_probe(struct pci_dev pdev, const struct pci_device_id id)
	{
	if (is_bypassed_id(pdev))
	return -ENODEV;
	return usb_hcd_pci_probe(pdev, id);
	}

	static void ehci_pci_remove(struct pci_dev *pdev)
	{
	pci_clear_mwi(pdev);
	usb_hcd_pci_remove(pdev);
	}

	/* PCI driver selection metadata; PCI hotplugging uses this */
	static const struct pci_device_id pci_ids [] = { {
	/* handle any USB 2.0 EHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
	.driver_data = (unsigned long) &ehci_pci_hc_driver,
	}, {
	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
	.driver_data = (unsigned long) &ehci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
	};
	MODULE_DEVICE_TABLE(pci, pci_ids);

	/* pci driver glue; this is a "new style" PCI driver module */
	static struct pci_driver ehci_pci_driver = {
	.name = (char *) hcd_name,
	.id_table = pci_ids,

	.probe = ehci_pci_probe,
	.remove = ehci_pci_remove,
	.shutdown = usb_hcd_pci_shutdown,

	#ifdef CONFIG_PM
	.driver = {
	.pm = &usb_hcd_pci_pm_ops
	},
	#endif
	};

	static int __init ehci_pci_init(void)
	{
	if (usb_disabled())
	return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

	ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);

	/* Entries for the PCI suspend/resume callbacks are special */
	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;

	return pci_register_driver(&ehci_pci_driver);
	}
	module_init(ehci_pci_init);

	static void __exit ehci_pci_cleanup(void)
	{
	pci_unregister_driver(&ehci_pci_driver);
	}
	module_exit(ehci_pci_cleanup);

	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_AUTHOR("David Brownell");
	MODULE_AUTHOR("Alan Stern");
	MODULE_LICENSE("GPL");