| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs | 
 |  * | 
 |  * Copyright (C) 2010 Google, Inc. | 
 |  * Copyright (C) 2009 - 2013 NVIDIA Corporation | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/err.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/io.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/of_gpio.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/reset.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/usb/ehci_def.h> | 
 | #include <linux/usb/tegra_usb_phy.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/hcd.h> | 
 | #include <linux/usb/otg.h> | 
 |  | 
 | #include "ehci.h" | 
 |  | 
 | #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) | 
 |  | 
 | #define TEGRA_USB_DMA_ALIGN 32 | 
 |  | 
 | #define DRIVER_DESC "Tegra EHCI driver" | 
 | #define DRV_NAME "tegra-ehci" | 
 |  | 
 | static struct hc_driver __read_mostly tegra_ehci_hc_driver; | 
 |  | 
 | struct tegra_ehci_soc_config { | 
 | 	bool has_hostpc; | 
 | }; | 
 |  | 
 | struct tegra_ehci_hcd { | 
 | 	struct tegra_usb_phy *phy; | 
 | 	struct clk *clk; | 
 | 	struct reset_control *rst; | 
 | 	int port_resuming; | 
 | 	bool needs_double_reset; | 
 | 	enum tegra_usb_phy_port_speed port_speed; | 
 | }; | 
 |  | 
 | static int tegra_reset_usb_controller(struct platform_device *pdev) | 
 | { | 
 | 	struct device_node *phy_np; | 
 | 	struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
 | 	struct tegra_ehci_hcd *tegra = | 
 | 		(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; | 
 | 	struct reset_control *rst; | 
 | 	int err; | 
 |  | 
 | 	phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0); | 
 | 	if (!phy_np) | 
 | 		return -ENOENT; | 
 |  | 
 | 	/* | 
 | 	 * The 1st USB controller contains some UTMI pad registers that are | 
 | 	 * global for all the controllers on the chip. Those registers are | 
 | 	 * also cleared when reset is asserted to the 1st controller. | 
 | 	 */ | 
 | 	rst = of_reset_control_get_shared(phy_np, "utmi-pads"); | 
 | 	if (IS_ERR(rst)) { | 
 | 		dev_warn(&pdev->dev, | 
 | 			 "can't get utmi-pads reset from the PHY\n"); | 
 | 		dev_warn(&pdev->dev, | 
 | 			 "continuing, but please update your DT\n"); | 
 | 	} else { | 
 | 		/* | 
 | 		 * PHY driver performs UTMI-pads reset in a case of | 
 | 		 * non-legacy DT. | 
 | 		 */ | 
 | 		reset_control_put(rst); | 
 | 	} | 
 |  | 
 | 	of_node_put(phy_np); | 
 |  | 
 | 	/* reset control is shared, hence initialize it first */ | 
 | 	err = reset_control_deassert(tegra->rst); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	err = reset_control_assert(tegra->rst); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	udelay(1); | 
 |  | 
 | 	err = reset_control_deassert(tegra->rst); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tegra_ehci_internal_port_reset( | 
 | 	struct ehci_hcd	*ehci, | 
 | 	u32 __iomem	*portsc_reg | 
 | ) | 
 | { | 
 | 	u32		temp; | 
 | 	unsigned long	flags; | 
 | 	int		retval = 0; | 
 | 	int		i, tries; | 
 | 	u32		saved_usbintr; | 
 |  | 
 | 	spin_lock_irqsave(&ehci->lock, flags); | 
 | 	saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable); | 
 | 	/* disable USB interrupt */ | 
 | 	ehci_writel(ehci, 0, &ehci->regs->intr_enable); | 
 | 	spin_unlock_irqrestore(&ehci->lock, flags); | 
 |  | 
 | 	/* | 
 | 	 * Here we have to do Port Reset at most twice for | 
 | 	 * Port Enable bit to be set. | 
 | 	 */ | 
 | 	for (i = 0; i < 2; i++) { | 
 | 		temp = ehci_readl(ehci, portsc_reg); | 
 | 		temp |= PORT_RESET; | 
 | 		ehci_writel(ehci, temp, portsc_reg); | 
 | 		mdelay(10); | 
 | 		temp &= ~PORT_RESET; | 
 | 		ehci_writel(ehci, temp, portsc_reg); | 
 | 		mdelay(1); | 
 | 		tries = 100; | 
 | 		do { | 
 | 			mdelay(1); | 
 | 			/* | 
 | 			 * Up to this point, Port Enable bit is | 
 | 			 * expected to be set after 2 ms waiting. | 
 | 			 * USB1 usually takes extra 45 ms, for safety, | 
 | 			 * we take 100 ms as timeout. | 
 | 			 */ | 
 | 			temp = ehci_readl(ehci, portsc_reg); | 
 | 		} while (!(temp & PORT_PE) && tries--); | 
 | 		if (temp & PORT_PE) | 
 | 			break; | 
 | 	} | 
 | 	if (i == 2) | 
 | 		retval = -ETIMEDOUT; | 
 |  | 
 | 	/* | 
 | 	 * Clear Connect Status Change bit if it's set. | 
 | 	 * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared. | 
 | 	 */ | 
 | 	if (temp & PORT_CSC) | 
 | 		ehci_writel(ehci, PORT_CSC, portsc_reg); | 
 |  | 
 | 	/* | 
 | 	 * Write to clear any interrupt status bits that might be set | 
 | 	 * during port reset. | 
 | 	 */ | 
 | 	temp = ehci_readl(ehci, &ehci->regs->status); | 
 | 	ehci_writel(ehci, temp, &ehci->regs->status); | 
 |  | 
 | 	/* restore original interrupt enable bits */ | 
 | 	ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int tegra_ehci_hub_control( | 
 | 	struct usb_hcd	*hcd, | 
 | 	u16		typeReq, | 
 | 	u16		wValue, | 
 | 	u16		wIndex, | 
 | 	char		*buf, | 
 | 	u16		wLength | 
 | ) | 
 | { | 
 | 	struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
 | 	struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)ehci->priv; | 
 | 	u32 __iomem	*status_reg; | 
 | 	u32		temp; | 
 | 	unsigned long	flags; | 
 | 	int		retval = 0; | 
 |  | 
 | 	status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; | 
 |  | 
 | 	spin_lock_irqsave(&ehci->lock, flags); | 
 |  | 
 | 	if (typeReq == GetPortStatus) { | 
 | 		temp = ehci_readl(ehci, status_reg); | 
 | 		if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { | 
 | 			/* Resume completed, re-enable disconnect detection */ | 
 | 			tegra->port_resuming = 0; | 
 | 			tegra_usb_phy_postresume(hcd->usb_phy); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { | 
 | 		temp = ehci_readl(ehci, status_reg); | 
 | 		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { | 
 | 			retval = -EPIPE; | 
 | 			goto done; | 
 | 		} | 
 |  | 
 | 		temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); | 
 | 		temp |= PORT_WKDISC_E | PORT_WKOC_E; | 
 | 		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); | 
 |  | 
 | 		/* | 
 | 		 * If a transaction is in progress, there may be a delay in | 
 | 		 * suspending the port. Poll until the port is suspended. | 
 | 		 */ | 
 | 		if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, | 
 | 						PORT_SUSPEND, 5000)) | 
 | 			pr_err("%s: timeout waiting for SUSPEND\n", __func__); | 
 |  | 
 | 		set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* For USB1 port we need to issue Port Reset twice internally */ | 
 | 	if (tegra->needs_double_reset && | 
 | 	   (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) { | 
 | 		spin_unlock_irqrestore(&ehci->lock, flags); | 
 | 		return tegra_ehci_internal_port_reset(ehci, status_reg); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Tegra host controller will time the resume operation to clear the bit | 
 | 	 * when the port control state switches to HS or FS Idle. This behavior | 
 | 	 * is different from EHCI where the host controller driver is required | 
 | 	 * to set this bit to a zero after the resume duration is timed in the | 
 | 	 * driver. | 
 | 	 */ | 
 | 	else if (typeReq == ClearPortFeature && | 
 | 					wValue == USB_PORT_FEAT_SUSPEND) { | 
 | 		temp = ehci_readl(ehci, status_reg); | 
 | 		if ((temp & PORT_RESET) || !(temp & PORT_PE)) { | 
 | 			retval = -EPIPE; | 
 | 			goto done; | 
 | 		} | 
 |  | 
 | 		if (!(temp & PORT_SUSPEND)) | 
 | 			goto done; | 
 |  | 
 | 		/* Disable disconnect detection during port resume */ | 
 | 		tegra_usb_phy_preresume(hcd->usb_phy); | 
 |  | 
 | 		ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); | 
 |  | 
 | 		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); | 
 | 		/* start resume signalling */ | 
 | 		ehci_writel(ehci, temp | PORT_RESUME, status_reg); | 
 | 		set_bit(wIndex-1, &ehci->resuming_ports); | 
 |  | 
 | 		spin_unlock_irqrestore(&ehci->lock, flags); | 
 | 		msleep(20); | 
 | 		spin_lock_irqsave(&ehci->lock, flags); | 
 |  | 
 | 		/* Poll until the controller clears RESUME and SUSPEND */ | 
 | 		if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000)) | 
 | 			pr_err("%s: timeout waiting for RESUME\n", __func__); | 
 | 		if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000)) | 
 | 			pr_err("%s: timeout waiting for SUSPEND\n", __func__); | 
 |  | 
 | 		ehci->reset_done[wIndex-1] = 0; | 
 | 		clear_bit(wIndex-1, &ehci->resuming_ports); | 
 |  | 
 | 		tegra->port_resuming = 1; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&ehci->lock, flags); | 
 |  | 
 | 	/* Handle the hub control events here */ | 
 | 	return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); | 
 |  | 
 | done: | 
 | 	spin_unlock_irqrestore(&ehci->lock, flags); | 
 | 	return retval; | 
 | } | 
 |  | 
 | struct dma_aligned_buffer { | 
 | 	void *kmalloc_ptr; | 
 | 	void *old_xfer_buffer; | 
 | 	u8 data[0]; | 
 | }; | 
 |  | 
 | static void free_dma_aligned_buffer(struct urb *urb) | 
 | { | 
 | 	struct dma_aligned_buffer *temp; | 
 | 	size_t length; | 
 |  | 
 | 	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) | 
 | 		return; | 
 |  | 
 | 	temp = container_of(urb->transfer_buffer, | 
 | 		struct dma_aligned_buffer, data); | 
 |  | 
 | 	if (usb_urb_dir_in(urb)) { | 
 | 		if (usb_pipeisoc(urb->pipe)) | 
 | 			length = urb->transfer_buffer_length; | 
 | 		else | 
 | 			length = urb->actual_length; | 
 |  | 
 | 		memcpy(temp->old_xfer_buffer, temp->data, length); | 
 | 	} | 
 | 	urb->transfer_buffer = temp->old_xfer_buffer; | 
 | 	kfree(temp->kmalloc_ptr); | 
 |  | 
 | 	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; | 
 | } | 
 |  | 
 | static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) | 
 | { | 
 | 	struct dma_aligned_buffer *temp, *kmalloc_ptr; | 
 | 	size_t kmalloc_size; | 
 |  | 
 | 	if (urb->num_sgs || urb->sg || | 
 | 	    urb->transfer_buffer_length == 0 || | 
 | 	    !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) | 
 | 		return 0; | 
 |  | 
 | 	/* Allocate a buffer with enough padding for alignment */ | 
 | 	kmalloc_size = urb->transfer_buffer_length + | 
 | 		sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1; | 
 |  | 
 | 	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); | 
 | 	if (!kmalloc_ptr) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Position our struct dma_aligned_buffer such that data is aligned */ | 
 | 	temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; | 
 | 	temp->kmalloc_ptr = kmalloc_ptr; | 
 | 	temp->old_xfer_buffer = urb->transfer_buffer; | 
 | 	if (usb_urb_dir_out(urb)) | 
 | 		memcpy(temp->data, urb->transfer_buffer, | 
 | 		       urb->transfer_buffer_length); | 
 | 	urb->transfer_buffer = temp->data; | 
 |  | 
 | 	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, | 
 | 				      gfp_t mem_flags) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = alloc_dma_aligned_buffer(urb, mem_flags); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); | 
 | 	if (ret) | 
 | 		free_dma_aligned_buffer(urb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) | 
 | { | 
 | 	usb_hcd_unmap_urb_for_dma(hcd, urb); | 
 | 	free_dma_aligned_buffer(urb); | 
 | } | 
 |  | 
 | static const struct tegra_ehci_soc_config tegra30_soc_config = { | 
 | 	.has_hostpc = true, | 
 | }; | 
 |  | 
 | static const struct tegra_ehci_soc_config tegra20_soc_config = { | 
 | 	.has_hostpc = false, | 
 | }; | 
 |  | 
 | static const struct of_device_id tegra_ehci_of_match[] = { | 
 | 	{ .compatible = "nvidia,tegra30-ehci", .data = &tegra30_soc_config }, | 
 | 	{ .compatible = "nvidia,tegra20-ehci", .data = &tegra20_soc_config }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static int tegra_ehci_probe(struct platform_device *pdev) | 
 | { | 
 | 	const struct of_device_id *match; | 
 | 	const struct tegra_ehci_soc_config *soc_config; | 
 | 	struct resource *res; | 
 | 	struct usb_hcd *hcd; | 
 | 	struct ehci_hcd *ehci; | 
 | 	struct tegra_ehci_hcd *tegra; | 
 | 	int err = 0; | 
 | 	int irq; | 
 | 	struct usb_phy *u_phy; | 
 |  | 
 | 	match = of_match_device(tegra_ehci_of_match, &pdev->dev); | 
 | 	if (!match) { | 
 | 		dev_err(&pdev->dev, "Error: No device match found\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	soc_config = match->data; | 
 |  | 
 | 	/* Right now device-tree probed devices don't get dma_mask set. | 
 | 	 * Since shared usb code relies on it, set it here for now. | 
 | 	 * Once we have dma capability bindings this can go away. | 
 | 	 */ | 
 | 	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, | 
 | 					dev_name(&pdev->dev)); | 
 | 	if (!hcd) { | 
 | 		dev_err(&pdev->dev, "Unable to create HCD\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	platform_set_drvdata(pdev, hcd); | 
 | 	ehci = hcd_to_ehci(hcd); | 
 | 	tegra = (struct tegra_ehci_hcd *)ehci->priv; | 
 |  | 
 | 	hcd->has_tt = 1; | 
 |  | 
 | 	tegra->clk = devm_clk_get(&pdev->dev, NULL); | 
 | 	if (IS_ERR(tegra->clk)) { | 
 | 		dev_err(&pdev->dev, "Can't get ehci clock\n"); | 
 | 		err = PTR_ERR(tegra->clk); | 
 | 		goto cleanup_hcd_create; | 
 | 	} | 
 |  | 
 | 	tegra->rst = devm_reset_control_get_shared(&pdev->dev, "usb"); | 
 | 	if (IS_ERR(tegra->rst)) { | 
 | 		dev_err(&pdev->dev, "Can't get ehci reset\n"); | 
 | 		err = PTR_ERR(tegra->rst); | 
 | 		goto cleanup_hcd_create; | 
 | 	} | 
 |  | 
 | 	err = clk_prepare_enable(tegra->clk); | 
 | 	if (err) | 
 | 		goto cleanup_hcd_create; | 
 |  | 
 | 	err = tegra_reset_usb_controller(pdev); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to reset controller\n"); | 
 | 		goto cleanup_clk_en; | 
 | 	} | 
 |  | 
 | 	u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); | 
 | 	if (IS_ERR(u_phy)) { | 
 | 		err = -EPROBE_DEFER; | 
 | 		goto cleanup_clk_en; | 
 | 	} | 
 | 	hcd->usb_phy = u_phy; | 
 | 	hcd->skip_phy_initialization = 1; | 
 |  | 
 | 	tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node, | 
 | 		"nvidia,needs-double-reset"); | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	hcd->regs = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(hcd->regs)) { | 
 | 		err = PTR_ERR(hcd->regs); | 
 | 		goto cleanup_clk_en; | 
 | 	} | 
 | 	hcd->rsrc_start = res->start; | 
 | 	hcd->rsrc_len = resource_size(res); | 
 |  | 
 | 	ehci->caps = hcd->regs + 0x100; | 
 | 	ehci->has_hostpc = soc_config->has_hostpc; | 
 |  | 
 | 	err = usb_phy_init(hcd->usb_phy); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to initialize phy\n"); | 
 | 		goto cleanup_clk_en; | 
 | 	} | 
 |  | 
 | 	u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), | 
 | 			     GFP_KERNEL); | 
 | 	if (!u_phy->otg) { | 
 | 		err = -ENOMEM; | 
 | 		goto cleanup_phy; | 
 | 	} | 
 | 	u_phy->otg->host = hcd_to_bus(hcd); | 
 |  | 
 | 	err = usb_phy_set_suspend(hcd->usb_phy, 0); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to power on the phy\n"); | 
 | 		goto cleanup_phy; | 
 | 	} | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (!irq) { | 
 | 		dev_err(&pdev->dev, "Failed to get IRQ\n"); | 
 | 		err = -ENODEV; | 
 | 		goto cleanup_phy; | 
 | 	} | 
 |  | 
 | 	otg_set_host(u_phy->otg, &hcd->self); | 
 |  | 
 | 	err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "Failed to add USB HCD\n"); | 
 | 		goto cleanup_otg_set_host; | 
 | 	} | 
 | 	device_wakeup_enable(hcd->self.controller); | 
 |  | 
 | 	return err; | 
 |  | 
 | cleanup_otg_set_host: | 
 | 	otg_set_host(u_phy->otg, NULL); | 
 | cleanup_phy: | 
 | 	usb_phy_shutdown(hcd->usb_phy); | 
 | cleanup_clk_en: | 
 | 	clk_disable_unprepare(tegra->clk); | 
 | cleanup_hcd_create: | 
 | 	usb_put_hcd(hcd); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int tegra_ehci_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
 | 	struct tegra_ehci_hcd *tegra = | 
 | 		(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; | 
 |  | 
 | 	otg_set_host(hcd->usb_phy->otg, NULL); | 
 |  | 
 | 	usb_phy_shutdown(hcd->usb_phy); | 
 | 	usb_remove_hcd(hcd); | 
 |  | 
 | 	reset_control_assert(tegra->rst); | 
 | 	udelay(1); | 
 |  | 
 | 	clk_disable_unprepare(tegra->clk); | 
 |  | 
 | 	usb_put_hcd(hcd); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
 |  | 
 | 	if (hcd->driver->shutdown) | 
 | 		hcd->driver->shutdown(hcd); | 
 | } | 
 |  | 
 | static struct platform_driver tegra_ehci_driver = { | 
 | 	.probe		= tegra_ehci_probe, | 
 | 	.remove		= tegra_ehci_remove, | 
 | 	.shutdown	= tegra_ehci_hcd_shutdown, | 
 | 	.driver		= { | 
 | 		.name	= DRV_NAME, | 
 | 		.of_match_table = tegra_ehci_of_match, | 
 | 	} | 
 | }; | 
 |  | 
 | static int tegra_ehci_reset(struct usb_hcd *hcd) | 
 | { | 
 | 	struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
 | 	int retval; | 
 | 	int txfifothresh; | 
 |  | 
 | 	retval = ehci_setup(hcd); | 
 | 	if (retval) | 
 | 		return retval; | 
 |  | 
 | 	/* | 
 | 	 * We should really pull this value out of tegra_ehci_soc_config, but | 
 | 	 * to avoid needing access to it, make use of the fact that Tegra20 is | 
 | 	 * the only one so far that needs a value of 10, and Tegra20 is the | 
 | 	 * only one which doesn't set has_hostpc. | 
 | 	 */ | 
 | 	txfifothresh = ehci->has_hostpc ? 0x10 : 10; | 
 | 	ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct ehci_driver_overrides tegra_overrides __initconst = { | 
 | 	.extra_priv_size	= sizeof(struct tegra_ehci_hcd), | 
 | 	.reset			= tegra_ehci_reset, | 
 | }; | 
 |  | 
 | static int __init ehci_tegra_init(void) | 
 | { | 
 | 	if (usb_disabled()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	pr_info(DRV_NAME ": " DRIVER_DESC "\n"); | 
 |  | 
 | 	ehci_init_driver(&tegra_ehci_hc_driver, &tegra_overrides); | 
 |  | 
 | 	/* | 
 | 	 * The Tegra HW has some unusual quirks, which require Tegra-specific | 
 | 	 * workarounds. We override certain hc_driver functions here to | 
 | 	 * achieve that. We explicitly do not enhance ehci_driver_overrides to | 
 | 	 * allow this more easily, since this is an unusual case, and we don't | 
 | 	 * want to encourage others to override these functions by making it | 
 | 	 * too easy. | 
 | 	 */ | 
 |  | 
 | 	tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma; | 
 | 	tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma; | 
 | 	tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control; | 
 |  | 
 | 	return platform_driver_register(&tegra_ehci_driver); | 
 | } | 
 | module_init(ehci_tegra_init); | 
 |  | 
 | static void __exit ehci_tegra_cleanup(void) | 
 | { | 
 | 	platform_driver_unregister(&tegra_ehci_driver); | 
 | } | 
 | module_exit(ehci_tegra_cleanup); | 
 |  | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:" DRV_NAME); | 
 | MODULE_DEVICE_TABLE(of, tegra_ehci_of_match); |