| /* | 
 |  * OCB mode implementation | 
 |  * | 
 |  * Copyright: (c) 2014 Czech Technical University in Prague | 
 |  *            (c) 2014 Volkswagen Group Research | 
 |  * Author:    Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> | 
 |  * Funded by: Volkswagen Group Research | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/if_ether.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/rtnetlink.h> | 
 | #include <net/mac80211.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "rate.h" | 
 |  | 
 | #define IEEE80211_OCB_HOUSEKEEPING_INTERVAL		(60 * HZ) | 
 | #define IEEE80211_OCB_PEER_INACTIVITY_LIMIT		(240 * HZ) | 
 | #define IEEE80211_OCB_MAX_STA_ENTRIES			128 | 
 |  | 
 | /** | 
 |  * enum ocb_deferred_task_flags - mac80211 OCB deferred tasks | 
 |  * @OCB_WORK_HOUSEKEEPING: run the periodic OCB housekeeping tasks | 
 |  * | 
 |  * These flags are used in @wrkq_flags field of &struct ieee80211_if_ocb | 
 |  */ | 
 | enum ocb_deferred_task_flags { | 
 | 	OCB_WORK_HOUSEKEEPING, | 
 | }; | 
 |  | 
 | void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata, | 
 | 			     const u8 *bssid, const u8 *addr, | 
 | 			     u32 supp_rates) | 
 | { | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	enum nl80211_bss_scan_width scan_width; | 
 | 	struct sta_info *sta; | 
 | 	int band; | 
 |  | 
 | 	/* XXX: Consider removing the least recently used entry and | 
 | 	 *      allow new one to be added. | 
 | 	 */ | 
 | 	if (local->num_sta >= IEEE80211_OCB_MAX_STA_ENTRIES) { | 
 | 		net_info_ratelimited("%s: No room for a new OCB STA entry %pM\n", | 
 | 				     sdata->name, addr); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ocb_dbg(sdata, "Adding new OCB station %pM\n", addr); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 	if (WARN_ON_ONCE(!chanctx_conf)) { | 
 | 		rcu_read_unlock(); | 
 | 		return; | 
 | 	} | 
 | 	band = chanctx_conf->def.chan->band; | 
 | 	scan_width = cfg80211_chandef_to_scan_width(&chanctx_conf->def); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	sta = sta_info_alloc(sdata, addr, GFP_ATOMIC); | 
 | 	if (!sta) | 
 | 		return; | 
 |  | 
 | 	/* Add only mandatory rates for now */ | 
 | 	sband = local->hw.wiphy->bands[band]; | 
 | 	sta->sta.supp_rates[band] = | 
 | 		ieee80211_mandatory_rates(sband, scan_width); | 
 |  | 
 | 	spin_lock(&ifocb->incomplete_lock); | 
 | 	list_add(&sta->list, &ifocb->incomplete_stations); | 
 | 	spin_unlock(&ifocb->incomplete_lock); | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | } | 
 |  | 
 | static struct sta_info *ieee80211_ocb_finish_sta(struct sta_info *sta) | 
 | 	__acquires(RCU) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	u8 addr[ETH_ALEN]; | 
 |  | 
 | 	memcpy(addr, sta->sta.addr, ETH_ALEN); | 
 |  | 
 | 	ocb_dbg(sdata, "Adding new IBSS station %pM (dev=%s)\n", | 
 | 		addr, sdata->name); | 
 |  | 
 | 	sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
 | 	sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
 | 	sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); | 
 |  | 
 | 	rate_control_rate_init(sta); | 
 |  | 
 | 	/* If it fails, maybe we raced another insertion? */ | 
 | 	if (sta_info_insert_rcu(sta)) | 
 | 		return sta_info_get(sdata, addr); | 
 | 	return sta; | 
 | } | 
 |  | 
 | static void ieee80211_ocb_housekeeping(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 |  | 
 | 	ocb_dbg(sdata, "Running ocb housekeeping\n"); | 
 |  | 
 | 	ieee80211_sta_expire(sdata, IEEE80211_OCB_PEER_INACTIVITY_LIMIT); | 
 |  | 
 | 	mod_timer(&ifocb->housekeeping_timer, | 
 | 		  round_jiffies(jiffies + IEEE80211_OCB_HOUSEKEEPING_INTERVAL)); | 
 | } | 
 |  | 
 | void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	if (ifocb->joined != true) | 
 | 		return; | 
 |  | 
 | 	sdata_lock(sdata); | 
 |  | 
 | 	spin_lock_bh(&ifocb->incomplete_lock); | 
 | 	while (!list_empty(&ifocb->incomplete_stations)) { | 
 | 		sta = list_first_entry(&ifocb->incomplete_stations, | 
 | 				       struct sta_info, list); | 
 | 		list_del(&sta->list); | 
 | 		spin_unlock_bh(&ifocb->incomplete_lock); | 
 |  | 
 | 		ieee80211_ocb_finish_sta(sta); | 
 | 		rcu_read_unlock(); | 
 | 		spin_lock_bh(&ifocb->incomplete_lock); | 
 | 	} | 
 | 	spin_unlock_bh(&ifocb->incomplete_lock); | 
 |  | 
 | 	if (test_and_clear_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags)) | 
 | 		ieee80211_ocb_housekeeping(sdata); | 
 |  | 
 | 	sdata_unlock(sdata); | 
 | } | 
 |  | 
 | static void ieee80211_ocb_housekeeping_timer(struct timer_list *t) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		from_timer(sdata, t, u.ocb.housekeeping_timer); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 |  | 
 | 	set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags); | 
 |  | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 | } | 
 |  | 
 | void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 |  | 
 | 	timer_setup(&ifocb->housekeeping_timer, | 
 | 		    ieee80211_ocb_housekeeping_timer, 0); | 
 | 	INIT_LIST_HEAD(&ifocb->incomplete_stations); | 
 | 	spin_lock_init(&ifocb->incomplete_lock); | 
 | } | 
 |  | 
 | int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata, | 
 | 		       struct ocb_setup *setup) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 | 	u32 changed = BSS_CHANGED_OCB | BSS_CHANGED_BSSID; | 
 | 	int err; | 
 |  | 
 | 	if (ifocb->joined == true) | 
 | 		return -EINVAL; | 
 |  | 
 | 	sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; | 
 | 	sdata->smps_mode = IEEE80211_SMPS_OFF; | 
 | 	sdata->needed_rx_chains = sdata->local->rx_chains; | 
 |  | 
 | 	mutex_lock(&sdata->local->mtx); | 
 | 	err = ieee80211_vif_use_channel(sdata, &setup->chandef, | 
 | 					IEEE80211_CHANCTX_SHARED); | 
 | 	mutex_unlock(&sdata->local->mtx); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	ifocb->joined = true; | 
 |  | 
 | 	set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags); | 
 | 	ieee80211_queue_work(&local->hw, &sdata->work); | 
 |  | 
 | 	netif_carrier_on(sdata->dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_if_ocb *ifocb = &sdata->u.ocb; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	ifocb->joined = false; | 
 | 	sta_info_flush(sdata); | 
 |  | 
 | 	spin_lock_bh(&ifocb->incomplete_lock); | 
 | 	while (!list_empty(&ifocb->incomplete_stations)) { | 
 | 		sta = list_first_entry(&ifocb->incomplete_stations, | 
 | 				       struct sta_info, list); | 
 | 		list_del(&sta->list); | 
 | 		spin_unlock_bh(&ifocb->incomplete_lock); | 
 |  | 
 | 		sta_info_free(local, sta); | 
 | 		spin_lock_bh(&ifocb->incomplete_lock); | 
 | 	} | 
 | 	spin_unlock_bh(&ifocb->incomplete_lock); | 
 |  | 
 | 	netif_carrier_off(sdata->dev); | 
 | 	clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_OCB); | 
 |  | 
 | 	mutex_lock(&sdata->local->mtx); | 
 | 	ieee80211_vif_release_channel(sdata); | 
 | 	mutex_unlock(&sdata->local->mtx); | 
 |  | 
 | 	skb_queue_purge(&sdata->skb_queue); | 
 |  | 
 | 	del_timer_sync(&sdata->u.ocb.housekeeping_timer); | 
 | 	/* If the timer fired while we waited for it, it will have | 
 | 	 * requeued the work. Now the work will be running again | 
 | 	 * but will not rearm the timer again because it checks | 
 | 	 * whether we are connected to the network or not -- at this | 
 | 	 * point we shouldn't be anymore. | 
 | 	 */ | 
 |  | 
 | 	return 0; | 
 | } |