| /* | 
 |  * Copyright (C) 2013  Intel Corporation. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along with | 
 |  * this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
 |  * | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "nci_spi: %s: " fmt, __func__ | 
 |  | 
 | #include <linux/module.h> | 
 |  | 
 | #include <linux/export.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/crc-ccitt.h> | 
 | #include <net/nfc/nci_core.h> | 
 |  | 
 | #define NCI_SPI_ACK_SHIFT		6 | 
 | #define NCI_SPI_MSB_PAYLOAD_MASK	0x3F | 
 |  | 
 | #define NCI_SPI_SEND_TIMEOUT	(NCI_CMD_TIMEOUT > NCI_DATA_TIMEOUT ? \ | 
 | 					NCI_CMD_TIMEOUT : NCI_DATA_TIMEOUT) | 
 |  | 
 | #define NCI_SPI_DIRECT_WRITE	0x01 | 
 | #define NCI_SPI_DIRECT_READ	0x02 | 
 |  | 
 | #define ACKNOWLEDGE_NONE	0 | 
 | #define ACKNOWLEDGE_ACK		1 | 
 | #define ACKNOWLEDGE_NACK	2 | 
 |  | 
 | #define CRC_INIT		0xFFFF | 
 |  | 
 | static int __nci_spi_send(struct nci_spi *nspi, struct sk_buff *skb, | 
 | 			  int cs_change) | 
 | { | 
 | 	struct spi_message m; | 
 | 	struct spi_transfer t; | 
 |  | 
 | 	memset(&t, 0, sizeof(struct spi_transfer)); | 
 | 	/* a NULL skb means we just want the SPI chip select line to raise */ | 
 | 	if (skb) { | 
 | 		t.tx_buf = skb->data; | 
 | 		t.len = skb->len; | 
 | 	} else { | 
 | 		/* still set tx_buf non NULL to make the driver happy */ | 
 | 		t.tx_buf = &t; | 
 | 		t.len = 0; | 
 | 	} | 
 | 	t.cs_change = cs_change; | 
 | 	t.delay_usecs = nspi->xfer_udelay; | 
 | 	t.speed_hz = nspi->xfer_speed_hz; | 
 |  | 
 | 	spi_message_init(&m); | 
 | 	spi_message_add_tail(&t, &m); | 
 |  | 
 | 	return spi_sync(nspi->spi, &m); | 
 | } | 
 |  | 
 | int nci_spi_send(struct nci_spi *nspi, | 
 | 		 struct completion *write_handshake_completion, | 
 | 		 struct sk_buff *skb) | 
 | { | 
 | 	unsigned int payload_len = skb->len; | 
 | 	unsigned char *hdr; | 
 | 	int ret; | 
 | 	long completion_rc; | 
 |  | 
 | 	/* add the NCI SPI header to the start of the buffer */ | 
 | 	hdr = skb_push(skb, NCI_SPI_HDR_LEN); | 
 | 	hdr[0] = NCI_SPI_DIRECT_WRITE; | 
 | 	hdr[1] = nspi->acknowledge_mode; | 
 | 	hdr[2] = payload_len >> 8; | 
 | 	hdr[3] = payload_len & 0xFF; | 
 |  | 
 | 	if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { | 
 | 		u16 crc; | 
 |  | 
 | 		crc = crc_ccitt(CRC_INIT, skb->data, skb->len); | 
 | 		skb_put_u8(skb, crc >> 8); | 
 | 		skb_put_u8(skb, crc & 0xFF); | 
 | 	} | 
 |  | 
 | 	if (write_handshake_completion)	{ | 
 | 		/* Trick SPI driver to raise chip select */ | 
 | 		ret = __nci_spi_send(nspi, NULL, 1); | 
 | 		if (ret) | 
 | 			goto done; | 
 |  | 
 | 		/* wait for NFC chip hardware handshake to complete */ | 
 | 		if (wait_for_completion_timeout(write_handshake_completion, | 
 | 						msecs_to_jiffies(1000)) == 0) { | 
 | 			ret = -ETIME; | 
 | 			goto done; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = __nci_spi_send(nspi, skb, 0); | 
 | 	if (ret != 0 || nspi->acknowledge_mode == NCI_SPI_CRC_DISABLED) | 
 | 		goto done; | 
 |  | 
 | 	reinit_completion(&nspi->req_completion); | 
 | 	completion_rc =	wait_for_completion_interruptible_timeout( | 
 | 							&nspi->req_completion, | 
 | 							NCI_SPI_SEND_TIMEOUT); | 
 |  | 
 | 	if (completion_rc <= 0 || nspi->req_result == ACKNOWLEDGE_NACK) | 
 | 		ret = -EIO; | 
 |  | 
 | done: | 
 | 	kfree_skb(skb); | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(nci_spi_send); | 
 |  | 
 | /* ---- Interface to NCI SPI drivers ---- */ | 
 |  | 
 | /** | 
 |  * nci_spi_allocate_spi - allocate a new nci spi | 
 |  * | 
 |  * @spi: SPI device | 
 |  * @acknowledge_mode: Acknowledge mode used by the NFC device | 
 |  * @delay: delay between transactions in us | 
 |  * @ndev: nci dev to send incoming nci frames to | 
 |  */ | 
 | struct nci_spi *nci_spi_allocate_spi(struct spi_device *spi, | 
 | 				     u8 acknowledge_mode, unsigned int delay, | 
 | 				     struct nci_dev *ndev) | 
 | { | 
 | 	struct nci_spi *nspi; | 
 |  | 
 | 	nspi = devm_kzalloc(&spi->dev, sizeof(struct nci_spi), GFP_KERNEL); | 
 | 	if (!nspi) | 
 | 		return NULL; | 
 |  | 
 | 	nspi->acknowledge_mode = acknowledge_mode; | 
 | 	nspi->xfer_udelay = delay; | 
 | 	/* Use controller max SPI speed by default */ | 
 | 	nspi->xfer_speed_hz = 0; | 
 | 	nspi->spi = spi; | 
 | 	nspi->ndev = ndev; | 
 | 	init_completion(&nspi->req_completion); | 
 |  | 
 | 	return nspi; | 
 | } | 
 | EXPORT_SYMBOL_GPL(nci_spi_allocate_spi); | 
 |  | 
 | static int send_acknowledge(struct nci_spi *nspi, u8 acknowledge) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	unsigned char *hdr; | 
 | 	u16 crc; | 
 | 	int ret; | 
 |  | 
 | 	skb = nci_skb_alloc(nspi->ndev, 0, GFP_KERNEL); | 
 |  | 
 | 	/* add the NCI SPI header to the start of the buffer */ | 
 | 	hdr = skb_push(skb, NCI_SPI_HDR_LEN); | 
 | 	hdr[0] = NCI_SPI_DIRECT_WRITE; | 
 | 	hdr[1] = NCI_SPI_CRC_ENABLED; | 
 | 	hdr[2] = acknowledge << NCI_SPI_ACK_SHIFT; | 
 | 	hdr[3] = 0; | 
 |  | 
 | 	crc = crc_ccitt(CRC_INIT, skb->data, skb->len); | 
 | 	skb_put_u8(skb, crc >> 8); | 
 | 	skb_put_u8(skb, crc & 0xFF); | 
 |  | 
 | 	ret = __nci_spi_send(nspi, skb, 0); | 
 |  | 
 | 	kfree_skb(skb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct sk_buff *__nci_spi_read(struct nci_spi *nspi) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct spi_message m; | 
 | 	unsigned char req[2], resp_hdr[2]; | 
 | 	struct spi_transfer tx, rx; | 
 | 	unsigned short rx_len = 0; | 
 | 	int ret; | 
 |  | 
 | 	spi_message_init(&m); | 
 |  | 
 | 	memset(&tx, 0, sizeof(struct spi_transfer)); | 
 | 	req[0] = NCI_SPI_DIRECT_READ; | 
 | 	req[1] = nspi->acknowledge_mode; | 
 | 	tx.tx_buf = req; | 
 | 	tx.len = 2; | 
 | 	tx.cs_change = 0; | 
 | 	tx.speed_hz = nspi->xfer_speed_hz; | 
 | 	spi_message_add_tail(&tx, &m); | 
 |  | 
 | 	memset(&rx, 0, sizeof(struct spi_transfer)); | 
 | 	rx.rx_buf = resp_hdr; | 
 | 	rx.len = 2; | 
 | 	rx.cs_change = 1; | 
 | 	rx.speed_hz = nspi->xfer_speed_hz; | 
 | 	spi_message_add_tail(&rx, &m); | 
 |  | 
 | 	ret = spi_sync(nspi->spi, &m); | 
 | 	if (ret) | 
 | 		return NULL; | 
 |  | 
 | 	if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) | 
 | 		rx_len = ((resp_hdr[0] & NCI_SPI_MSB_PAYLOAD_MASK) << 8) + | 
 | 				resp_hdr[1] + NCI_SPI_CRC_LEN; | 
 | 	else | 
 | 		rx_len = (resp_hdr[0] << 8) | resp_hdr[1]; | 
 |  | 
 | 	skb = nci_skb_alloc(nspi->ndev, rx_len, GFP_KERNEL); | 
 | 	if (!skb) | 
 | 		return NULL; | 
 |  | 
 | 	spi_message_init(&m); | 
 |  | 
 | 	memset(&rx, 0, sizeof(struct spi_transfer)); | 
 | 	rx.rx_buf = skb_put(skb, rx_len); | 
 | 	rx.len = rx_len; | 
 | 	rx.cs_change = 0; | 
 | 	rx.delay_usecs = nspi->xfer_udelay; | 
 | 	rx.speed_hz = nspi->xfer_speed_hz; | 
 | 	spi_message_add_tail(&rx, &m); | 
 |  | 
 | 	ret = spi_sync(nspi->spi, &m); | 
 | 	if (ret) | 
 | 		goto receive_error; | 
 |  | 
 | 	if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { | 
 | 		*(u8 *)skb_push(skb, 1) = resp_hdr[1]; | 
 | 		*(u8 *)skb_push(skb, 1) = resp_hdr[0]; | 
 | 	} | 
 |  | 
 | 	return skb; | 
 |  | 
 | receive_error: | 
 | 	kfree_skb(skb); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int nci_spi_check_crc(struct sk_buff *skb) | 
 | { | 
 | 	u16 crc_data = (skb->data[skb->len - 2] << 8) | | 
 | 			skb->data[skb->len - 1]; | 
 | 	int ret; | 
 |  | 
 | 	ret = (crc_ccitt(CRC_INIT, skb->data, skb->len - NCI_SPI_CRC_LEN) | 
 | 			== crc_data); | 
 |  | 
 | 	skb_trim(skb, skb->len - NCI_SPI_CRC_LEN); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static u8 nci_spi_get_ack(struct sk_buff *skb) | 
 | { | 
 | 	u8 ret; | 
 |  | 
 | 	ret = skb->data[0] >> NCI_SPI_ACK_SHIFT; | 
 |  | 
 | 	/* Remove NFCC part of the header: ACK, NACK and MSB payload len */ | 
 | 	skb_pull(skb, 2); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * nci_spi_read - read frame from NCI SPI drivers | 
 |  * | 
 |  * @nspi: The nci spi | 
 |  * Context: can sleep | 
 |  * | 
 |  * This call may only be used from a context that may sleep.  The sleep | 
 |  * is non-interruptible, and has no timeout. | 
 |  * | 
 |  * It returns an allocated skb containing the frame on success, or NULL. | 
 |  */ | 
 | struct sk_buff *nci_spi_read(struct nci_spi *nspi) | 
 | { | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* Retrieve frame from SPI */ | 
 | 	skb = __nci_spi_read(nspi); | 
 | 	if (!skb) | 
 | 		goto done; | 
 |  | 
 | 	if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { | 
 | 		if (!nci_spi_check_crc(skb)) { | 
 | 			send_acknowledge(nspi, ACKNOWLEDGE_NACK); | 
 | 			goto done; | 
 | 		} | 
 |  | 
 | 		/* In case of acknowledged mode: if ACK or NACK received, | 
 | 		 * unblock completion of latest frame sent. | 
 | 		 */ | 
 | 		nspi->req_result = nci_spi_get_ack(skb); | 
 | 		if (nspi->req_result) | 
 | 			complete(&nspi->req_completion); | 
 | 	} | 
 |  | 
 | 	/* If there is no payload (ACK/NACK only frame), | 
 | 	 * free the socket buffer | 
 | 	 */ | 
 | 	if (!skb->len) { | 
 | 		kfree_skb(skb); | 
 | 		skb = NULL; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) | 
 | 		send_acknowledge(nspi, ACKNOWLEDGE_ACK); | 
 |  | 
 | done: | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL_GPL(nci_spi_read); | 
 |  | 
 | MODULE_LICENSE("GPL"); |