| /* | 
 |  * HT handling | 
 |  * | 
 |  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi> | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
 |  * Copyright 2007-2010, Intel Corporation | 
 |  * Copyright(c) 2015-2017 Intel Deutschland GmbH | 
 |  * Copyright (C) 2018 - 2019 Intel Corporation | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/ieee80211.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/export.h> | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "wme.h" | 
 |  | 
 | /** | 
 |  * DOC: TX A-MPDU aggregation | 
 |  * | 
 |  * Aggregation on the TX side requires setting the hardware flag | 
 |  * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed | 
 |  * packets with a flag indicating A-MPDU aggregation. The driver | 
 |  * or device is responsible for actually aggregating the frames, | 
 |  * as well as deciding how many and which to aggregate. | 
 |  * | 
 |  * When TX aggregation is started by some subsystem (usually the rate | 
 |  * control algorithm would be appropriate) by calling the | 
 |  * ieee80211_start_tx_ba_session() function, the driver will be | 
 |  * notified via its @ampdu_action function, with the | 
 |  * %IEEE80211_AMPDU_TX_START action. | 
 |  * | 
 |  * In response to that, the driver is later required to call the | 
 |  * ieee80211_start_tx_ba_cb_irqsafe() function, which will really | 
 |  * start the aggregation session after the peer has also responded. | 
 |  * If the peer responds negatively, the session will be stopped | 
 |  * again right away. Note that it is possible for the aggregation | 
 |  * session to be stopped before the driver has indicated that it | 
 |  * is done setting it up, in which case it must not indicate the | 
 |  * setup completion. | 
 |  * | 
 |  * Also note that, since we also need to wait for a response from | 
 |  * the peer, the driver is notified of the completion of the | 
 |  * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the | 
 |  * @ampdu_action callback. | 
 |  * | 
 |  * Similarly, when the aggregation session is stopped by the peer | 
 |  * or something calling ieee80211_stop_tx_ba_session(), the driver's | 
 |  * @ampdu_action function will be called with the action | 
 |  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail, | 
 |  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe(). | 
 |  * Note that the sta can get destroyed before the BA tear down is | 
 |  * complete. | 
 |  */ | 
 |  | 
 | static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata, | 
 | 					 const u8 *da, u16 tid, | 
 | 					 u8 dialog_token, u16 start_seq_num, | 
 | 					 u16 agg_size, u16 timeout) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_mgmt *mgmt; | 
 | 	u16 capab; | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); | 
 |  | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	mgmt = skb_put_zero(skb, 24); | 
 | 	memcpy(mgmt->da, da, ETH_ALEN); | 
 | 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | 
 | 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | 
 | 	else if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
 | 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN); | 
 | 	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
 | 		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN); | 
 |  | 
 | 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 					  IEEE80211_STYPE_ACTION); | 
 |  | 
 | 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req)); | 
 |  | 
 | 	mgmt->u.action.category = WLAN_CATEGORY_BACK; | 
 | 	mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ; | 
 |  | 
 | 	mgmt->u.action.u.addba_req.dialog_token = dialog_token; | 
 | 	capab = (u16)(1 << 0);		/* bit 0 A-MSDU support */ | 
 | 	capab |= (u16)(1 << 1);		/* bit 1 aggregation policy */ | 
 | 	capab |= (u16)(tid << 2); 	/* bit 5:2 TID number */ | 
 | 	capab |= (u16)(agg_size << 6);	/* bit 15:6 max size of aggergation */ | 
 |  | 
 | 	mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab); | 
 |  | 
 | 	mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout); | 
 | 	mgmt->u.action.u.addba_req.start_seq_num = | 
 | 					cpu_to_le16(start_seq_num << 4); | 
 |  | 
 | 	ieee80211_tx_skb(sdata, skb); | 
 | } | 
 |  | 
 | void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_bar *bar; | 
 | 	u16 bar_control = 0; | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	bar = skb_put_zero(skb, sizeof(*bar)); | 
 | 	bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | | 
 | 					 IEEE80211_STYPE_BACK_REQ); | 
 | 	memcpy(bar->ra, ra, ETH_ALEN); | 
 | 	memcpy(bar->ta, sdata->vif.addr, ETH_ALEN); | 
 | 	bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL; | 
 | 	bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA; | 
 | 	bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT); | 
 | 	bar->control = cpu_to_le16(bar_control); | 
 | 	bar->start_seq_num = cpu_to_le16(ssn); | 
 |  | 
 | 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | | 
 | 					IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 	ieee80211_tx_skb_tid(sdata, skb, tid); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_send_bar); | 
 |  | 
 | void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, | 
 | 			     struct tid_ampdu_tx *tid_tx) | 
 | { | 
 | 	lockdep_assert_held(&sta->ampdu_mlme.mtx); | 
 | 	lockdep_assert_held(&sta->lock); | 
 | 	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx); | 
 | } | 
 |  | 
 | /* | 
 |  * When multiple aggregation sessions on multiple stations | 
 |  * are being created/destroyed simultaneously, we need to | 
 |  * refcount the global queue stop caused by that in order | 
 |  * to not get into a situation where one of the aggregation | 
 |  * setup or teardown re-enables queues before the other is | 
 |  * ready to handle that. | 
 |  * | 
 |  * These two functions take care of this issue by keeping | 
 |  * a global "agg_queue_stop" refcount. | 
 |  */ | 
 | static void __acquires(agg_queue) | 
 | ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) | 
 | { | 
 | 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; | 
 |  | 
 | 	/* we do refcounting here, so don't use the queue reason refcounting */ | 
 |  | 
 | 	if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1) | 
 | 		ieee80211_stop_queue_by_reason( | 
 | 			&sdata->local->hw, queue, | 
 | 			IEEE80211_QUEUE_STOP_REASON_AGGREGATION, | 
 | 			false); | 
 | 	__acquire(agg_queue); | 
 | } | 
 |  | 
 | static void __releases(agg_queue) | 
 | ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) | 
 | { | 
 | 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; | 
 |  | 
 | 	if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0) | 
 | 		ieee80211_wake_queue_by_reason( | 
 | 			&sdata->local->hw, queue, | 
 | 			IEEE80211_QUEUE_STOP_REASON_AGGREGATION, | 
 | 			false); | 
 | 	__release(agg_queue); | 
 | } | 
 |  | 
 | static void | 
 | ieee80211_agg_stop_txq(struct sta_info *sta, int tid) | 
 | { | 
 | 	struct ieee80211_txq *txq = sta->sta.txq[tid]; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct fq *fq; | 
 | 	struct txq_info *txqi; | 
 |  | 
 | 	if (!txq) | 
 | 		return; | 
 |  | 
 | 	txqi = to_txq_info(txq); | 
 | 	sdata = vif_to_sdata(txq->vif); | 
 | 	fq = &sdata->local->fq; | 
 |  | 
 | 	/* Lock here to protect against further seqno updates on dequeue */ | 
 | 	spin_lock_bh(&fq->lock); | 
 | 	set_bit(IEEE80211_TXQ_STOP, &txqi->flags); | 
 | 	spin_unlock_bh(&fq->lock); | 
 | } | 
 |  | 
 | static void | 
 | ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable) | 
 | { | 
 | 	struct ieee80211_txq *txq = sta->sta.txq[tid]; | 
 | 	struct txq_info *txqi; | 
 |  | 
 | 	if (!txq) | 
 | 		return; | 
 |  | 
 | 	txqi = to_txq_info(txq); | 
 |  | 
 | 	if (enable) | 
 | 		set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags); | 
 | 	else | 
 | 		clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags); | 
 |  | 
 | 	clear_bit(IEEE80211_TXQ_STOP, &txqi->flags); | 
 | 	local_bh_disable(); | 
 | 	rcu_read_lock(); | 
 | 	drv_wake_tx_queue(sta->sdata->local, txqi); | 
 | 	rcu_read_unlock(); | 
 | 	local_bh_enable(); | 
 | } | 
 |  | 
 | /* | 
 |  * splice packets from the STA's pending to the local pending, | 
 |  * requires a call to ieee80211_agg_splice_finish later | 
 |  */ | 
 | static void __acquires(agg_queue) | 
 | ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata, | 
 | 			     struct tid_ampdu_tx *tid_tx, u16 tid) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; | 
 | 	unsigned long flags; | 
 |  | 
 | 	ieee80211_stop_queue_agg(sdata, tid); | 
 |  | 
 | 	if (WARN(!tid_tx, | 
 | 		 "TID %d gone but expected when splicing aggregates from the pending queue\n", | 
 | 		 tid)) | 
 | 		return; | 
 |  | 
 | 	if (!skb_queue_empty(&tid_tx->pending)) { | 
 | 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
 | 		/* copy over remaining packets */ | 
 | 		skb_queue_splice_tail_init(&tid_tx->pending, | 
 | 					   &local->pending[queue]); | 
 | 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
 | 	} | 
 | } | 
 |  | 
 | static void __releases(agg_queue) | 
 | ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid) | 
 | { | 
 | 	ieee80211_wake_queue_agg(sdata, tid); | 
 | } | 
 |  | 
 | static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 	lockdep_assert_held(&sta->ampdu_mlme.mtx); | 
 | 	lockdep_assert_held(&sta->lock); | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 |  | 
 | 	/* | 
 | 	 * When we get here, the TX path will not be lockless any more wrt. | 
 | 	 * aggregation, since the OPERATIONAL bit has long been cleared. | 
 | 	 * Thus it will block on getting the lock, if it occurs. So if we | 
 | 	 * stop the queue now, we will not get any more packets, and any | 
 | 	 * that might be being processed will wait for us here, thereby | 
 | 	 * guaranteeing that no packets go to the tid_tx pending queue any | 
 | 	 * more. | 
 | 	 */ | 
 |  | 
 | 	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); | 
 |  | 
 | 	/* future packets must not find the tid_tx struct any more */ | 
 | 	ieee80211_assign_tid_tx(sta, tid, NULL); | 
 |  | 
 | 	ieee80211_agg_splice_finish(sta->sdata, tid); | 
 | 	ieee80211_agg_start_txq(sta, tid, false); | 
 |  | 
 | 	kfree_rcu(tid_tx, rcu_head); | 
 | } | 
 |  | 
 | int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, | 
 | 				    enum ieee80211_agg_stop_reason reason) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct ieee80211_ampdu_params params = { | 
 | 		.sta = &sta->sta, | 
 | 		.tid = tid, | 
 | 		.buf_size = 0, | 
 | 		.amsdu = false, | 
 | 		.timeout = 0, | 
 | 		.ssn = 0, | 
 | 	}; | 
 | 	int ret; | 
 |  | 
 | 	lockdep_assert_held(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	switch (reason) { | 
 | 	case AGG_STOP_DECLINED: | 
 | 	case AGG_STOP_LOCAL_REQUEST: | 
 | 	case AGG_STOP_PEER_REQUEST: | 
 | 		params.action = IEEE80211_AMPDU_TX_STOP_CONT; | 
 | 		break; | 
 | 	case AGG_STOP_DESTROY_STA: | 
 | 		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH; | 
 | 		break; | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 |  | 
 | 	/* free struct pending for start, if present */ | 
 | 	tid_tx = sta->ampdu_mlme.tid_start_tx[tid]; | 
 | 	kfree(tid_tx); | 
 | 	sta->ampdu_mlme.tid_start_tx[tid] = NULL; | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 | 	if (!tid_tx) { | 
 | 		spin_unlock_bh(&sta->lock); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * if we're already stopping ignore any new requests to stop | 
 | 	 * unless we're destroying it in which case notify the driver | 
 | 	 */ | 
 | 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { | 
 | 		spin_unlock_bh(&sta->lock); | 
 | 		if (reason != AGG_STOP_DESTROY_STA) | 
 | 			return -EALREADY; | 
 | 		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH_CONT; | 
 | 		ret = drv_ampdu_action(local, sta->sdata, ¶ms); | 
 | 		WARN_ON_ONCE(ret); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { | 
 | 		/* not even started yet! */ | 
 | 		ieee80211_assign_tid_tx(sta, tid, NULL); | 
 | 		spin_unlock_bh(&sta->lock); | 
 | 		kfree_rcu(tid_tx, rcu_head); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); | 
 |  | 
 | 	ieee80211_agg_stop_txq(sta, tid); | 
 |  | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	del_timer_sync(&tid_tx->addba_resp_timer); | 
 | 	del_timer_sync(&tid_tx->session_timer); | 
 |  | 
 | 	/* | 
 | 	 * After this packets are no longer handed right through | 
 | 	 * to the driver but are put onto tid_tx->pending instead, | 
 | 	 * with locking to ensure proper access. | 
 | 	 */ | 
 | 	clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); | 
 |  | 
 | 	/* | 
 | 	 * There might be a few packets being processed right now (on | 
 | 	 * another CPU) that have already gotten past the aggregation | 
 | 	 * check when it was still OPERATIONAL and consequently have | 
 | 	 * IEEE80211_TX_CTL_AMPDU set. In that case, this code might | 
 | 	 * call into the driver at the same time or even before the | 
 | 	 * TX paths calls into it, which could confuse the driver. | 
 | 	 * | 
 | 	 * Wait for all currently running TX paths to finish before | 
 | 	 * telling the driver. New packets will not go through since | 
 | 	 * the aggregation session is no longer OPERATIONAL. | 
 | 	 */ | 
 | 	if (!local->in_reconfig) | 
 | 		synchronize_net(); | 
 |  | 
 | 	tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ? | 
 | 					WLAN_BACK_RECIPIENT : | 
 | 					WLAN_BACK_INITIATOR; | 
 | 	tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST; | 
 |  | 
 | 	ret = drv_ampdu_action(local, sta->sdata, ¶ms); | 
 |  | 
 | 	/* HW shall not deny going back to legacy */ | 
 | 	if (WARN_ON(ret)) { | 
 | 		/* | 
 | 		 * We may have pending packets get stuck in this case... | 
 | 		 * Not bothering with a workaround for now. | 
 | 		 */ | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * In the case of AGG_STOP_DESTROY_STA, the driver won't | 
 | 	 * necessarily call ieee80211_stop_tx_ba_cb(), so this may | 
 | 	 * seem like we can leave the tid_tx data pending forever. | 
 | 	 * This is true, in a way, but "forever" is only until the | 
 | 	 * station struct is actually destroyed. In the meantime, | 
 | 	 * leaving it around ensures that we don't transmit packets | 
 | 	 * to the driver on this TID which might confuse it. | 
 | 	 */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * After sending add Block Ack request we activated a timer until | 
 |  * add Block Ack response will arrive from the recipient. | 
 |  * If this timer expires sta_addba_resp_timer_expired will be executed. | 
 |  */ | 
 | static void sta_addba_resp_timer_expired(struct timer_list *t) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, addba_resp_timer); | 
 | 	struct sta_info *sta = tid_tx->sta; | 
 | 	u8 tid = tid_tx->tid; | 
 |  | 
 | 	/* check if the TID waits for addBA response */ | 
 | 	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) { | 
 | 		ht_dbg(sta->sdata, | 
 | 		       "timer expired on %pM tid %d not expecting addBA response\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	ieee80211_stop_tx_ba_session(&sta->sta, tid); | 
 | } | 
 |  | 
 | void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_ampdu_params params = { | 
 | 		.sta = &sta->sta, | 
 | 		.action = IEEE80211_AMPDU_TX_START, | 
 | 		.tid = tid, | 
 | 		.buf_size = 0, | 
 | 		.amsdu = false, | 
 | 		.timeout = 0, | 
 | 	}; | 
 | 	int ret; | 
 | 	u16 buf_size; | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 |  | 
 | 	/* | 
 | 	 * Start queuing up packets for this aggregation session. | 
 | 	 * We're going to release them once the driver is OK with | 
 | 	 * that. | 
 | 	 */ | 
 | 	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); | 
 |  | 
 | 	ieee80211_agg_stop_txq(sta, tid); | 
 |  | 
 | 	/* | 
 | 	 * Make sure no packets are being processed. This ensures that | 
 | 	 * we have a valid starting sequence number and that in-flight | 
 | 	 * packets have been flushed out and no packets for this TID | 
 | 	 * will go into the driver during the ampdu_action call. | 
 | 	 */ | 
 | 	synchronize_net(); | 
 |  | 
 | 	params.ssn = sta->tid_seq[tid] >> 4; | 
 | 	ret = drv_ampdu_action(local, sdata, ¶ms); | 
 | 	if (ret) { | 
 | 		ht_dbg(sdata, | 
 | 		       "BA request denied - HW unavailable for %pM tid %d\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		spin_lock_bh(&sta->lock); | 
 | 		ieee80211_agg_splice_packets(sdata, tid_tx, tid); | 
 | 		ieee80211_assign_tid_tx(sta, tid, NULL); | 
 | 		ieee80211_agg_splice_finish(sdata, tid); | 
 | 		spin_unlock_bh(&sta->lock); | 
 |  | 
 | 		ieee80211_agg_start_txq(sta, tid, false); | 
 |  | 
 | 		kfree_rcu(tid_tx, rcu_head); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* activate the timer for the recipient's addBA response */ | 
 | 	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL); | 
 | 	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 | 	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies; | 
 | 	sta->ampdu_mlme.addba_req_num[tid]++; | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	if (sta->sta.he_cap.has_he) { | 
 | 		buf_size = local->hw.max_tx_aggregation_subframes; | 
 | 	} else { | 
 | 		/* | 
 | 		 * We really should use what the driver told us it will | 
 | 		 * transmit as the maximum, but certain APs (e.g. the | 
 | 		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012) | 
 | 		 * will crash when we use a lower number. | 
 | 		 */ | 
 | 		buf_size = IEEE80211_MAX_AMPDU_BUF_HT; | 
 | 	} | 
 |  | 
 | 	/* send AddBA request */ | 
 | 	ieee80211_send_addba_request(sdata, sta->sta.addr, tid, | 
 | 				     tid_tx->dialog_token, params.ssn, | 
 | 				     buf_size, tid_tx->timeout); | 
 | } | 
 |  | 
 | /* | 
 |  * After accepting the AddBA Response we activated a timer, | 
 |  * resetting it after each frame that we send. | 
 |  */ | 
 | static void sta_tx_agg_session_timer_expired(struct timer_list *t) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, session_timer); | 
 | 	struct sta_info *sta = tid_tx->sta; | 
 | 	u8 tid = tid_tx->tid; | 
 | 	unsigned long timeout; | 
 |  | 
 | 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout); | 
 | 	if (time_is_after_jiffies(timeout)) { | 
 | 		mod_timer(&tid_tx->session_timer, timeout); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	ieee80211_stop_tx_ba_session(&sta->sta, tid); | 
 | } | 
 |  | 
 | int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, | 
 | 				  u16 timeout) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	int ret = 0; | 
 |  | 
 | 	trace_api_start_tx_ba_session(pubsta, tid); | 
 |  | 
 | 	if (WARN(sta->reserved_tid == tid, | 
 | 		 "Requested to start BA session on reserved tid=%d", tid)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!pubsta->ht_cap.ht_supported) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (WARN_ON_ONCE(!local->ops->ampdu_action)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((tid >= IEEE80211_NUM_TIDS) || | 
 | 	    !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) || | 
 | 	    ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (WARN_ON(tid >= IEEE80211_FIRST_TSPEC_TSID)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ht_dbg(sdata, "Open BA session requested for %pM tid %u\n", | 
 | 	       pubsta->addr, tid); | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_AP && | 
 | 	    sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) { | 
 | 		ht_dbg(sdata, | 
 | 		       "BA sessions blocked - Denying BA session request %pM tid %d\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a | 
 | 	 * member of an IBSS, and has no other existing Block Ack agreement | 
 | 	 * with the recipient STA, then the initiating STA shall transmit a | 
 | 	 * Probe Request frame to the recipient STA and shall not transmit an | 
 | 	 * ADDBA Request frame unless it receives a Probe Response frame | 
 | 	 * from the recipient within dot11ADDBAFailureTimeout. | 
 | 	 * | 
 | 	 * The probe request mechanism for ADDBA is currently not implemented, | 
 | 	 * but we only build up Block Ack session with HT STAs. This information | 
 | 	 * is set when we receive a bss info from a probe response or a beacon. | 
 | 	 */ | 
 | 	if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC && | 
 | 	    !sta->sta.ht_cap.ht_supported) { | 
 | 		ht_dbg(sdata, | 
 | 		       "BA request denied - IBSS STA %pM does not advertise HT support\n", | 
 | 		       pubsta->addr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 |  | 
 | 	/* we have tried too many times, receiver does not want A-MPDU */ | 
 | 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) { | 
 | 		ret = -EBUSY; | 
 | 		goto err_unlock_sta; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * if we have tried more than HT_AGG_BURST_RETRIES times we | 
 | 	 * will spread our requests in time to avoid stalling connection | 
 | 	 * for too long | 
 | 	 */ | 
 | 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES && | 
 | 	    time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] + | 
 | 			HT_AGG_RETRIES_PERIOD)) { | 
 | 		ht_dbg(sdata, | 
 | 		       "BA request denied - %d failed requests on %pM tid %u\n", | 
 | 		       sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid); | 
 | 		ret = -EBUSY; | 
 | 		goto err_unlock_sta; | 
 | 	} | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 | 	/* check if the TID is not in aggregation flow already */ | 
 | 	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) { | 
 | 		ht_dbg(sdata, | 
 | 		       "BA request denied - session is not idle on %pM tid %u\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		ret = -EAGAIN; | 
 | 		goto err_unlock_sta; | 
 | 	} | 
 |  | 
 | 	/* prepare A-MPDU MLME for Tx aggregation */ | 
 | 	tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); | 
 | 	if (!tid_tx) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_unlock_sta; | 
 | 	} | 
 |  | 
 | 	skb_queue_head_init(&tid_tx->pending); | 
 | 	__set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); | 
 |  | 
 | 	tid_tx->timeout = timeout; | 
 | 	tid_tx->sta = sta; | 
 | 	tid_tx->tid = tid; | 
 |  | 
 | 	/* response timer */ | 
 | 	timer_setup(&tid_tx->addba_resp_timer, sta_addba_resp_timer_expired, 0); | 
 |  | 
 | 	/* tx timer */ | 
 | 	timer_setup(&tid_tx->session_timer, | 
 | 		    sta_tx_agg_session_timer_expired, TIMER_DEFERRABLE); | 
 |  | 
 | 	/* assign a dialog token */ | 
 | 	sta->ampdu_mlme.dialog_token_allocator++; | 
 | 	tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator; | 
 |  | 
 | 	/* | 
 | 	 * Finally, assign it to the start array; the work item will | 
 | 	 * collect it and move it to the normal array. | 
 | 	 */ | 
 | 	sta->ampdu_mlme.tid_start_tx[tid] = tid_tx; | 
 |  | 
 | 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); | 
 |  | 
 | 	/* this flow continues off the work */ | 
 |  err_unlock_sta: | 
 | 	spin_unlock_bh(&sta->lock); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_start_tx_ba_session); | 
 |  | 
 | static void ieee80211_agg_tx_operational(struct ieee80211_local *local, | 
 | 					 struct sta_info *sta, u16 tid) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct ieee80211_ampdu_params params = { | 
 | 		.sta = &sta->sta, | 
 | 		.action = IEEE80211_AMPDU_TX_OPERATIONAL, | 
 | 		.tid = tid, | 
 | 		.timeout = 0, | 
 | 		.ssn = 0, | 
 | 	}; | 
 |  | 
 | 	lockdep_assert_held(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 | 	params.buf_size = tid_tx->buf_size; | 
 | 	params.amsdu = tid_tx->amsdu; | 
 |  | 
 | 	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	drv_ampdu_action(local, sta->sdata, ¶ms); | 
 |  | 
 | 	/* | 
 | 	 * synchronize with TX path, while splicing the TX path | 
 | 	 * should block so it won't put more packets onto pending. | 
 | 	 */ | 
 | 	spin_lock_bh(&sta->lock); | 
 |  | 
 | 	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); | 
 | 	/* | 
 | 	 * Now mark as operational. This will be visible | 
 | 	 * in the TX path, and lets it go lock-free in | 
 | 	 * the common case. | 
 | 	 */ | 
 | 	set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); | 
 | 	ieee80211_agg_splice_finish(sta->sdata, tid); | 
 |  | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	ieee80211_agg_start_txq(sta, tid, true); | 
 | } | 
 |  | 
 | void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid, | 
 | 			      struct tid_ampdu_tx *tid_tx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))) | 
 | 		return; | 
 |  | 
 | 	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) | 
 | 		ieee80211_agg_tx_operational(local, sta, tid); | 
 | } | 
 |  | 
 | static struct tid_ampdu_tx * | 
 | ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata, | 
 | 			const u8 *ra, u16 tid, struct sta_info **sta) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 	if (tid >= IEEE80211_NUM_TIDS) { | 
 | 		ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n", | 
 | 		       tid, IEEE80211_NUM_TIDS); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	*sta = sta_info_get_bss(sdata, ra); | 
 | 	if (!*sta) { | 
 | 		ht_dbg(sdata, "Could not find station: %pM\n", ra); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]); | 
 |  | 
 | 	if (WARN_ON(!tid_tx)) | 
 | 		ht_dbg(sdata, "addBA was not requested!\n"); | 
 |  | 
 | 	return tid_tx; | 
 | } | 
 |  | 
 | void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, | 
 | 				      const u8 *ra, u16 tid) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 	trace_api_start_tx_ba_cb(sdata, ra, tid); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta); | 
 | 	if (!tid_tx) | 
 | 		goto out; | 
 |  | 
 | 	set_bit(HT_AGG_STATE_START_CB, &tid_tx->state); | 
 | 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); | 
 |  | 
 | int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, | 
 | 				   enum ieee80211_agg_stop_reason reason) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason); | 
 |  | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	int ret = 0; | 
 |  | 
 | 	trace_api_stop_tx_ba_session(pubsta, tid); | 
 |  | 
 | 	if (!local->ops->ampdu_action) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (tid >= IEEE80211_NUM_TIDS) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 |  | 
 | 	if (!tid_tx) { | 
 | 		ret = -ENOENT; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	WARN(sta->reserved_tid == tid, | 
 | 	     "Requested to stop BA session on reserved tid=%d", tid); | 
 |  | 
 | 	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { | 
 | 		/* already in progress stopping it */ | 
 | 		ret = 0; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state); | 
 | 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); | 
 |  | 
 |  unlock: | 
 | 	spin_unlock_bh(&sta->lock); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); | 
 |  | 
 | void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid, | 
 | 			     struct tid_ampdu_tx *tid_tx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	bool send_delba = false; | 
 |  | 
 | 	ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	spin_lock_bh(&sta->lock); | 
 |  | 
 | 	if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { | 
 | 		ht_dbg(sdata, | 
 | 		       "unexpected callback to A-MPDU stop for %pM tid %d\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		goto unlock_sta; | 
 | 	} | 
 |  | 
 | 	if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop) | 
 | 		send_delba = true; | 
 |  | 
 | 	ieee80211_remove_tid_tx(sta, tid); | 
 |  | 
 |  unlock_sta: | 
 | 	spin_unlock_bh(&sta->lock); | 
 |  | 
 | 	if (send_delba) | 
 | 		ieee80211_send_delba(sdata, sta->sta.addr, tid, | 
 | 			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); | 
 | } | 
 |  | 
 | void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, | 
 | 				     const u8 *ra, u16 tid) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 	trace_api_stop_tx_ba_cb(sdata, ra, tid); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta); | 
 | 	if (!tid_tx) | 
 | 		goto out; | 
 |  | 
 | 	set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state); | 
 | 	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); | 
 |  | 
 |  | 
 | void ieee80211_process_addba_resp(struct ieee80211_local *local, | 
 | 				  struct sta_info *sta, | 
 | 				  struct ieee80211_mgmt *mgmt, | 
 | 				  size_t len) | 
 | { | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct ieee80211_txq *txq; | 
 | 	u16 capab, tid, buf_size; | 
 | 	bool amsdu; | 
 |  | 
 | 	capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab); | 
 | 	amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK; | 
 | 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2; | 
 | 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6; | 
 | 	buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes); | 
 |  | 
 | 	txq = sta->sta.txq[tid]; | 
 | 	if (!amsdu && txq) | 
 | 		set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags); | 
 |  | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 | 	if (!tid_tx) | 
 | 		goto out; | 
 |  | 
 | 	if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) { | 
 | 		ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	del_timer_sync(&tid_tx->addba_resp_timer); | 
 |  | 
 | 	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n", | 
 | 	       sta->sta.addr, tid); | 
 |  | 
 | 	/* | 
 | 	 * addba_resp_timer may have fired before we got here, and | 
 | 	 * caused WANT_STOP to be set. If the stop then was already | 
 | 	 * processed further, STOPPING might be set. | 
 | 	 */ | 
 | 	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) || | 
 | 	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { | 
 | 		ht_dbg(sta->sdata, | 
 | 		       "got addBA resp for %pM tid %d but we already gave up\n", | 
 | 		       sta->sta.addr, tid); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * IEEE 802.11-2007 7.3.1.14: | 
 | 	 * In an ADDBA Response frame, when the Status Code field | 
 | 	 * is set to 0, the Buffer Size subfield is set to a value | 
 | 	 * of at least 1. | 
 | 	 */ | 
 | 	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status) | 
 | 			== WLAN_STATUS_SUCCESS && buf_size) { | 
 | 		if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED, | 
 | 				     &tid_tx->state)) { | 
 | 			/* ignore duplicate response */ | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		tid_tx->buf_size = buf_size; | 
 | 		tid_tx->amsdu = amsdu; | 
 |  | 
 | 		if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)) | 
 | 			ieee80211_agg_tx_operational(local, sta, tid); | 
 |  | 
 | 		sta->ampdu_mlme.addba_req_num[tid] = 0; | 
 |  | 
 | 		tid_tx->timeout = | 
 | 			le16_to_cpu(mgmt->u.action.u.addba_resp.timeout); | 
 |  | 
 | 		if (tid_tx->timeout) { | 
 | 			mod_timer(&tid_tx->session_timer, | 
 | 				  TU_TO_EXP_TIME(tid_tx->timeout)); | 
 | 			tid_tx->last_tx = jiffies; | 
 | 		} | 
 |  | 
 | 	} else { | 
 | 		___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 | } |