| /* | 
 |  * HT handling | 
 |  * | 
 |  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi> | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
 |  * Copyright 2007-2010, Intel Corporation | 
 |  * Copyright 2017	Intel Deutschland GmbH | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/ieee80211.h> | 
 | #include <linux/export.h> | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "rate.h" | 
 |  | 
 | static void __check_htcap_disable(struct ieee80211_ht_cap *ht_capa, | 
 | 				  struct ieee80211_ht_cap *ht_capa_mask, | 
 | 				  struct ieee80211_sta_ht_cap *ht_cap, | 
 | 				  u16 flag) | 
 | { | 
 | 	__le16 le_flag = cpu_to_le16(flag); | 
 | 	if (ht_capa_mask->cap_info & le_flag) { | 
 | 		if (!(ht_capa->cap_info & le_flag)) | 
 | 			ht_cap->cap &= ~flag; | 
 | 	} | 
 | } | 
 |  | 
 | static void __check_htcap_enable(struct ieee80211_ht_cap *ht_capa, | 
 | 				  struct ieee80211_ht_cap *ht_capa_mask, | 
 | 				  struct ieee80211_sta_ht_cap *ht_cap, | 
 | 				  u16 flag) | 
 | { | 
 | 	__le16 le_flag = cpu_to_le16(flag); | 
 |  | 
 | 	if ((ht_capa_mask->cap_info & le_flag) && | 
 | 	    (ht_capa->cap_info & le_flag)) | 
 | 		ht_cap->cap |= flag; | 
 | } | 
 |  | 
 | void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, | 
 | 				     struct ieee80211_sta_ht_cap *ht_cap) | 
 | { | 
 | 	struct ieee80211_ht_cap *ht_capa, *ht_capa_mask; | 
 | 	u8 *scaps, *smask; | 
 | 	int i; | 
 |  | 
 | 	if (!ht_cap->ht_supported) | 
 | 		return; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		ht_capa = &sdata->u.mgd.ht_capa; | 
 | 		ht_capa_mask = &sdata->u.mgd.ht_capa_mask; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		ht_capa = &sdata->u.ibss.ht_capa; | 
 | 		ht_capa_mask = &sdata->u.ibss.ht_capa_mask; | 
 | 		break; | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	scaps = (u8 *)(&ht_capa->mcs.rx_mask); | 
 | 	smask = (u8 *)(&ht_capa_mask->mcs.rx_mask); | 
 |  | 
 | 	/* NOTE:  If you add more over-rides here, update register_hw | 
 | 	 * ht_capa_mod_mask logic in main.c as well. | 
 | 	 * And, if this method can ever change ht_cap.ht_supported, fix | 
 | 	 * the check in ieee80211_add_ht_ie. | 
 | 	 */ | 
 |  | 
 | 	/* check for HT over-rides, MCS rates first. */ | 
 | 	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) { | 
 | 		u8 m = smask[i]; | 
 | 		ht_cap->mcs.rx_mask[i] &= ~m; /* turn off all masked bits */ | 
 | 		/* Add back rates that are supported */ | 
 | 		ht_cap->mcs.rx_mask[i] |= (m & scaps[i]); | 
 | 	} | 
 |  | 
 | 	/* Force removal of HT-40 capabilities? */ | 
 | 	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			      IEEE80211_HT_CAP_SUP_WIDTH_20_40); | 
 | 	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			      IEEE80211_HT_CAP_SGI_40); | 
 |  | 
 | 	/* Allow user to disable SGI-20 (SGI-40 is handled above) */ | 
 | 	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			      IEEE80211_HT_CAP_SGI_20); | 
 |  | 
 | 	/* Allow user to disable the max-AMSDU bit. */ | 
 | 	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			      IEEE80211_HT_CAP_MAX_AMSDU); | 
 |  | 
 | 	/* Allow user to disable LDPC */ | 
 | 	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			      IEEE80211_HT_CAP_LDPC_CODING); | 
 |  | 
 | 	/* Allow user to enable 40 MHz intolerant bit. */ | 
 | 	__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap, | 
 | 			     IEEE80211_HT_CAP_40MHZ_INTOLERANT); | 
 |  | 
 | 	/* Allow user to decrease AMPDU factor */ | 
 | 	if (ht_capa_mask->ampdu_params_info & | 
 | 	    IEEE80211_HT_AMPDU_PARM_FACTOR) { | 
 | 		u8 n = ht_capa->ampdu_params_info & | 
 | 		       IEEE80211_HT_AMPDU_PARM_FACTOR; | 
 | 		if (n < ht_cap->ampdu_factor) | 
 | 			ht_cap->ampdu_factor = n; | 
 | 	} | 
 |  | 
 | 	/* Allow the user to increase AMPDU density. */ | 
 | 	if (ht_capa_mask->ampdu_params_info & | 
 | 	    IEEE80211_HT_AMPDU_PARM_DENSITY) { | 
 | 		u8 n = (ht_capa->ampdu_params_info & | 
 | 			IEEE80211_HT_AMPDU_PARM_DENSITY) | 
 | 			>> IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT; | 
 | 		if (n > ht_cap->ampdu_density) | 
 | 			ht_cap->ampdu_density = n; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, | 
 | 				       struct ieee80211_supported_band *sband, | 
 | 				       const struct ieee80211_ht_cap *ht_cap_ie, | 
 | 				       struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sta_ht_cap ht_cap, own_cap; | 
 | 	u8 ampdu_info, tx_mcs_set_cap; | 
 | 	int i, max_tx_streams; | 
 | 	bool changed; | 
 | 	enum ieee80211_sta_rx_bandwidth bw; | 
 | 	enum ieee80211_smps_mode smps_mode; | 
 |  | 
 | 	memset(&ht_cap, 0, sizeof(ht_cap)); | 
 |  | 
 | 	if (!ht_cap_ie || !sband->ht_cap.ht_supported) | 
 | 		goto apply; | 
 |  | 
 | 	ht_cap.ht_supported = true; | 
 |  | 
 | 	own_cap = sband->ht_cap; | 
 |  | 
 | 	/* | 
 | 	 * If user has specified capability over-rides, take care | 
 | 	 * of that if the station we're setting up is the AP or TDLS peer that | 
 | 	 * we advertised a restricted capability set to. Override | 
 | 	 * our own capabilities and then use those below. | 
 | 	 */ | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
 | 		ieee80211_apply_htcap_overrides(sdata, &own_cap); | 
 |  | 
 | 	/* | 
 | 	 * The bits listed in this expression should be | 
 | 	 * the same for the peer and us, if the station | 
 | 	 * advertises more then we can't use those thus | 
 | 	 * we mask them out. | 
 | 	 */ | 
 | 	ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) & | 
 | 		(own_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING | | 
 | 				 IEEE80211_HT_CAP_SUP_WIDTH_20_40 | | 
 | 				 IEEE80211_HT_CAP_GRN_FLD | | 
 | 				 IEEE80211_HT_CAP_SGI_20 | | 
 | 				 IEEE80211_HT_CAP_SGI_40 | | 
 | 				 IEEE80211_HT_CAP_DSSSCCK40)); | 
 |  | 
 | 	/* | 
 | 	 * The STBC bits are asymmetric -- if we don't have | 
 | 	 * TX then mask out the peer's RX and vice versa. | 
 | 	 */ | 
 | 	if (!(own_cap.cap & IEEE80211_HT_CAP_TX_STBC)) | 
 | 		ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC; | 
 | 	if (!(own_cap.cap & IEEE80211_HT_CAP_RX_STBC)) | 
 | 		ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC; | 
 |  | 
 | 	ampdu_info = ht_cap_ie->ampdu_params_info; | 
 | 	ht_cap.ampdu_factor = | 
 | 		ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; | 
 | 	ht_cap.ampdu_density = | 
 | 		(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; | 
 |  | 
 | 	/* own MCS TX capabilities */ | 
 | 	tx_mcs_set_cap = own_cap.mcs.tx_params; | 
 |  | 
 | 	/* Copy peer MCS TX capabilities, the driver might need them. */ | 
 | 	ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params; | 
 |  | 
 | 	/* can we TX with MCS rates? */ | 
 | 	if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) | 
 | 		goto apply; | 
 |  | 
 | 	/* Counting from 0, therefore +1 */ | 
 | 	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) | 
 | 		max_tx_streams = | 
 | 			((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) | 
 | 				>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1; | 
 | 	else | 
 | 		max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS; | 
 |  | 
 | 	/* | 
 | 	 * 802.11n-2009 20.3.5 / 20.6 says: | 
 | 	 * - indices 0 to 7 and 32 are single spatial stream | 
 | 	 * - 8 to 31 are multiple spatial streams using equal modulation | 
 | 	 *   [8..15 for two streams, 16..23 for three and 24..31 for four] | 
 | 	 * - remainder are multiple spatial streams using unequal modulation | 
 | 	 */ | 
 | 	for (i = 0; i < max_tx_streams; i++) | 
 | 		ht_cap.mcs.rx_mask[i] = | 
 | 			own_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; | 
 |  | 
 | 	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) | 
 | 		for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; | 
 | 		     i < IEEE80211_HT_MCS_MASK_LEN; i++) | 
 | 			ht_cap.mcs.rx_mask[i] = | 
 | 				own_cap.mcs.rx_mask[i] & | 
 | 					ht_cap_ie->mcs.rx_mask[i]; | 
 |  | 
 | 	/* handle MCS rate 32 too */ | 
 | 	if (own_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) | 
 | 		ht_cap.mcs.rx_mask[32/8] |= 1; | 
 |  | 
 | 	/* set Rx highest rate */ | 
 | 	ht_cap.mcs.rx_highest = ht_cap_ie->mcs.rx_highest; | 
 |  | 
 | 	if (ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU) | 
 | 		sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_7935; | 
 | 	else | 
 | 		sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_3839; | 
 |  | 
 |  apply: | 
 | 	changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); | 
 |  | 
 | 	memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); | 
 |  | 
 | 	switch (sdata->vif.bss_conf.chandef.width) { | 
 | 	default: | 
 | 		WARN_ON_ONCE(1); | 
 | 		/* fall through */ | 
 | 	case NL80211_CHAN_WIDTH_20_NOHT: | 
 | 	case NL80211_CHAN_WIDTH_20: | 
 | 		bw = IEEE80211_STA_RX_BW_20; | 
 | 		break; | 
 | 	case NL80211_CHAN_WIDTH_40: | 
 | 	case NL80211_CHAN_WIDTH_80: | 
 | 	case NL80211_CHAN_WIDTH_80P80: | 
 | 	case NL80211_CHAN_WIDTH_160: | 
 | 		bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | 
 | 				IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	sta->sta.bandwidth = bw; | 
 |  | 
 | 	sta->cur_max_bandwidth = | 
 | 		ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | 
 | 				IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; | 
 |  | 
 | 	switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS) | 
 | 			>> IEEE80211_HT_CAP_SM_PS_SHIFT) { | 
 | 	case WLAN_HT_CAP_SM_PS_INVALID: | 
 | 	case WLAN_HT_CAP_SM_PS_STATIC: | 
 | 		smps_mode = IEEE80211_SMPS_STATIC; | 
 | 		break; | 
 | 	case WLAN_HT_CAP_SM_PS_DYNAMIC: | 
 | 		smps_mode = IEEE80211_SMPS_DYNAMIC; | 
 | 		break; | 
 | 	case WLAN_HT_CAP_SM_PS_DISABLED: | 
 | 		smps_mode = IEEE80211_SMPS_OFF; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (smps_mode != sta->sta.smps_mode) | 
 | 		changed = true; | 
 | 	sta->sta.smps_mode = smps_mode; | 
 |  | 
 | 	return changed; | 
 | } | 
 |  | 
 | void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, | 
 | 					 enum ieee80211_agg_stop_reason reason) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 | 	for (i = 0; i <  IEEE80211_NUM_TIDS; i++) | 
 | 		___ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT, | 
 | 						WLAN_REASON_QSTA_LEAVE_QBSS, | 
 | 						reason != AGG_STOP_DESTROY_STA && | 
 | 						reason != AGG_STOP_PEER_REQUEST); | 
 |  | 
 | 	for (i = 0; i <  IEEE80211_NUM_TIDS; i++) | 
 | 		___ieee80211_stop_tx_ba_session(sta, i, reason); | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	/* | 
 | 	 * In case the tear down is part of a reconfigure due to HW restart | 
 | 	 * request, it is possible that the low level driver requested to stop | 
 | 	 * the BA session, so handle it to properly clean tid_tx data. | 
 | 	 */ | 
 | 	if(reason == AGG_STOP_DESTROY_STA) { | 
 | 		cancel_work_sync(&sta->ampdu_mlme.work); | 
 |  | 
 | 		mutex_lock(&sta->ampdu_mlme.mtx); | 
 | 		for (i = 0; i < IEEE80211_NUM_TIDS; i++) { | 
 | 			struct tid_ampdu_tx *tid_tx = | 
 | 				rcu_dereference_protected_tid_tx(sta, i); | 
 |  | 
 | 			if (!tid_tx) | 
 | 				continue; | 
 |  | 
 | 			if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state)) | 
 | 				ieee80211_stop_tx_ba_cb(sta, i, tid_tx); | 
 | 		} | 
 | 		mutex_unlock(&sta->ampdu_mlme.mtx); | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_ba_session_work(struct work_struct *work) | 
 | { | 
 | 	struct sta_info *sta = | 
 | 		container_of(work, struct sta_info, ampdu_mlme.work); | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	bool blocked; | 
 | 	int tid; | 
 |  | 
 | 	/* When this flag is set, new sessions should be blocked. */ | 
 | 	blocked = test_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
 |  | 
 | 	mutex_lock(&sta->ampdu_mlme.mtx); | 
 | 	for (tid = 0; tid < IEEE80211_NUM_TIDS; tid++) { | 
 | 		if (test_and_clear_bit(tid, sta->ampdu_mlme.tid_rx_timer_expired)) | 
 | 			___ieee80211_stop_rx_ba_session( | 
 | 				sta, tid, WLAN_BACK_RECIPIENT, | 
 | 				WLAN_REASON_QSTA_TIMEOUT, true); | 
 |  | 
 | 		if (test_and_clear_bit(tid, | 
 | 				       sta->ampdu_mlme.tid_rx_stop_requested)) | 
 | 			___ieee80211_stop_rx_ba_session( | 
 | 				sta, tid, WLAN_BACK_RECIPIENT, | 
 | 				WLAN_REASON_UNSPECIFIED, true); | 
 |  | 
 | 		if (!blocked && | 
 | 		    test_and_clear_bit(tid, | 
 | 				       sta->ampdu_mlme.tid_rx_manage_offl)) | 
 | 			___ieee80211_start_rx_ba_session(sta, 0, 0, 0, 1, tid, | 
 | 							 IEEE80211_MAX_AMPDU_BUF_HT, | 
 | 							 false, true); | 
 |  | 
 | 		if (test_and_clear_bit(tid + IEEE80211_NUM_TIDS, | 
 | 				       sta->ampdu_mlme.tid_rx_manage_offl)) | 
 | 			___ieee80211_stop_rx_ba_session( | 
 | 				sta, tid, WLAN_BACK_RECIPIENT, | 
 | 				0, false); | 
 |  | 
 | 		spin_lock_bh(&sta->lock); | 
 |  | 
 | 		tid_tx = sta->ampdu_mlme.tid_start_tx[tid]; | 
 | 		if (!blocked && tid_tx) { | 
 | 			/* | 
 | 			 * Assign it over to the normal tid_tx array | 
 | 			 * where it "goes live". | 
 | 			 */ | 
 |  | 
 | 			sta->ampdu_mlme.tid_start_tx[tid] = NULL; | 
 | 			/* could there be a race? */ | 
 | 			if (sta->ampdu_mlme.tid_tx[tid]) | 
 | 				kfree(tid_tx); | 
 | 			else | 
 | 				ieee80211_assign_tid_tx(sta, tid, tid_tx); | 
 | 			spin_unlock_bh(&sta->lock); | 
 |  | 
 | 			ieee80211_tx_ba_session_handle_start(sta, tid); | 
 | 			continue; | 
 | 		} | 
 | 		spin_unlock_bh(&sta->lock); | 
 |  | 
 | 		tid_tx = rcu_dereference_protected_tid_tx(sta, tid); | 
 | 		if (!tid_tx) | 
 | 			continue; | 
 |  | 
 | 		if (!blocked && | 
 | 		    test_and_clear_bit(HT_AGG_STATE_START_CB, &tid_tx->state)) | 
 | 			ieee80211_start_tx_ba_cb(sta, tid, tid_tx); | 
 | 		if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state)) | 
 | 			___ieee80211_stop_tx_ba_session(sta, tid, | 
 | 							AGG_STOP_LOCAL_REQUEST); | 
 | 		if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state)) | 
 | 			ieee80211_stop_tx_ba_cb(sta, tid, tid_tx); | 
 | 	} | 
 | 	mutex_unlock(&sta->ampdu_mlme.mtx); | 
 | } | 
 |  | 
 | void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, | 
 | 			  const u8 *da, u16 tid, | 
 | 			  u16 initiator, u16 reason_code) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_mgmt *mgmt; | 
 | 	u16 params; | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	mgmt = skb_put_zero(skb, 24); | 
 | 	memcpy(mgmt->da, da, ETH_ALEN); | 
 | 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | 
 | 		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | 
 | 	else if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
 | 		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN); | 
 | 	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
 | 		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN); | 
 |  | 
 | 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 					  IEEE80211_STYPE_ACTION); | 
 |  | 
 | 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba)); | 
 |  | 
 | 	mgmt->u.action.category = WLAN_CATEGORY_BACK; | 
 | 	mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA; | 
 | 	params = (u16)(initiator << 11); 	/* bit 11 initiator */ | 
 | 	params |= (u16)(tid << 12); 		/* bit 15:12 TID number */ | 
 |  | 
 | 	mgmt->u.action.u.delba.params = cpu_to_le16(params); | 
 | 	mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code); | 
 |  | 
 | 	ieee80211_tx_skb(sdata, skb); | 
 | } | 
 |  | 
 | void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, | 
 | 			     struct sta_info *sta, | 
 | 			     struct ieee80211_mgmt *mgmt, size_t len) | 
 | { | 
 | 	u16 tid, params; | 
 | 	u16 initiator; | 
 |  | 
 | 	params = le16_to_cpu(mgmt->u.action.u.delba.params); | 
 | 	tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12; | 
 | 	initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11; | 
 |  | 
 | 	ht_dbg_ratelimited(sdata, "delba from %pM (%s) tid %d reason code %d\n", | 
 | 			   mgmt->sa, initiator ? "initiator" : "recipient", | 
 | 			   tid, | 
 | 			   le16_to_cpu(mgmt->u.action.u.delba.reason_code)); | 
 |  | 
 | 	if (initiator == WLAN_BACK_INITIATOR) | 
 | 		__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0, | 
 | 					       true); | 
 | 	else | 
 | 		__ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST); | 
 | } | 
 |  | 
 | enum nl80211_smps_mode | 
 | ieee80211_smps_mode_to_smps_mode(enum ieee80211_smps_mode smps) | 
 | { | 
 | 	switch (smps) { | 
 | 	case IEEE80211_SMPS_OFF: | 
 | 		return NL80211_SMPS_OFF; | 
 | 	case IEEE80211_SMPS_STATIC: | 
 | 		return NL80211_SMPS_STATIC; | 
 | 	case IEEE80211_SMPS_DYNAMIC: | 
 | 		return NL80211_SMPS_DYNAMIC; | 
 | 	default: | 
 | 		return NL80211_SMPS_OFF; | 
 | 	} | 
 | } | 
 |  | 
 | int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata, | 
 | 			       enum ieee80211_smps_mode smps, const u8 *da, | 
 | 			       const u8 *bssid) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_mgmt *action_frame; | 
 |  | 
 | 	/* 27 = header + category + action + smps mode */ | 
 | 	skb = dev_alloc_skb(27 + local->hw.extra_tx_headroom); | 
 | 	if (!skb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 | 	action_frame = skb_put(skb, 27); | 
 | 	memcpy(action_frame->da, da, ETH_ALEN); | 
 | 	memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN); | 
 | 	memcpy(action_frame->bssid, bssid, ETH_ALEN); | 
 | 	action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 						  IEEE80211_STYPE_ACTION); | 
 | 	action_frame->u.action.category = WLAN_CATEGORY_HT; | 
 | 	action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS; | 
 | 	switch (smps) { | 
 | 	case IEEE80211_SMPS_AUTOMATIC: | 
 | 	case IEEE80211_SMPS_NUM_MODES: | 
 | 		WARN_ON(1); | 
 | 		/* fall through */ | 
 | 	case IEEE80211_SMPS_OFF: | 
 | 		action_frame->u.action.u.ht_smps.smps_control = | 
 | 				WLAN_HT_SMPS_CONTROL_DISABLED; | 
 | 		break; | 
 | 	case IEEE80211_SMPS_STATIC: | 
 | 		action_frame->u.action.u.ht_smps.smps_control = | 
 | 				WLAN_HT_SMPS_CONTROL_STATIC; | 
 | 		break; | 
 | 	case IEEE80211_SMPS_DYNAMIC: | 
 | 		action_frame->u.action.u.ht_smps.smps_control = | 
 | 				WLAN_HT_SMPS_CONTROL_DYNAMIC; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* we'll do more on status of this frame */ | 
 | 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 	ieee80211_tx_skb(sdata, skb); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ieee80211_request_smps_mgd_work(struct work_struct *work) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		container_of(work, struct ieee80211_sub_if_data, | 
 | 			     u.mgd.request_smps_work); | 
 |  | 
 | 	sdata_lock(sdata); | 
 | 	__ieee80211_request_smps_mgd(sdata, sdata->u.mgd.driver_smps_mode); | 
 | 	sdata_unlock(sdata); | 
 | } | 
 |  | 
 | void ieee80211_request_smps_ap_work(struct work_struct *work) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		container_of(work, struct ieee80211_sub_if_data, | 
 | 			     u.ap.request_smps_work); | 
 |  | 
 | 	sdata_lock(sdata); | 
 | 	if (sdata_dereference(sdata->u.ap.beacon, sdata)) | 
 | 		__ieee80211_request_smps_ap(sdata, | 
 | 					    sdata->u.ap.driver_smps_mode); | 
 | 	sdata_unlock(sdata); | 
 | } | 
 |  | 
 | void ieee80211_request_smps(struct ieee80211_vif *vif, | 
 | 			    enum ieee80211_smps_mode smps_mode) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 |  | 
 | 	if (WARN_ON_ONCE(vif->type != NL80211_IFTYPE_STATION && | 
 | 			 vif->type != NL80211_IFTYPE_AP)) | 
 | 		return; | 
 |  | 
 | 	if (vif->type == NL80211_IFTYPE_STATION) { | 
 | 		if (sdata->u.mgd.driver_smps_mode == smps_mode) | 
 | 			return; | 
 | 		sdata->u.mgd.driver_smps_mode = smps_mode; | 
 | 		ieee80211_queue_work(&sdata->local->hw, | 
 | 				     &sdata->u.mgd.request_smps_work); | 
 | 	} else { | 
 | 		/* AUTOMATIC is meaningless in AP mode */ | 
 | 		if (WARN_ON_ONCE(smps_mode == IEEE80211_SMPS_AUTOMATIC)) | 
 | 			return; | 
 | 		if (sdata->u.ap.driver_smps_mode == smps_mode) | 
 | 			return; | 
 | 		sdata->u.ap.driver_smps_mode = smps_mode; | 
 | 		ieee80211_queue_work(&sdata->local->hw, | 
 | 				     &sdata->u.ap.request_smps_work); | 
 | 	} | 
 | } | 
 | /* this might change ... don't want non-open drivers using it */ | 
 | EXPORT_SYMBOL_GPL(ieee80211_request_smps); |