| /* | 
 |  * arch/arm/mach-ixp4xx/nas100d-pci.c | 
 |  * | 
 |  * NAS 100d board-level PCI initialization | 
 |  * | 
 |  * based on ixdp425-pci.c: | 
 |  *	Copyright (C) 2002 Intel Corporation. | 
 |  *	Copyright (C) 2003-2004 MontaVista Software, Inc. | 
 |  * | 
 |  * Maintainer: http://www.nslu2-linux.org/ | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/init.h> | 
 | #include <linux/irq.h> | 
 | #include <asm/mach/pci.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | #define MAX_DEV		3 | 
 | #define IRQ_LINES	3 | 
 |  | 
 | /* PCI controller GPIO to IRQ pin mappings */ | 
 | #define INTA		11 | 
 | #define INTB		10 | 
 | #define INTC		9 | 
 | #define INTD		8 | 
 | #define INTE		7 | 
 |  | 
 | void __init nas100d_pci_preinit(void) | 
 | { | 
 | 	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); | 
 | 	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); | 
 | 	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); | 
 | 	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); | 
 | 	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); | 
 | 	ixp4xx_pci_preinit(); | 
 | } | 
 |  | 
 | static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) | 
 | { | 
 | 	static int pci_irq_table[MAX_DEV][IRQ_LINES] = { | 
 | 		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 }, | 
 | 		{ IXP4XX_GPIO_IRQ(INTB), -1, -1 }, | 
 | 		{ IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD), | 
 | 		  IXP4XX_GPIO_IRQ(INTE) }, | 
 | 	}; | 
 |  | 
 | 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) | 
 | 		return pci_irq_table[slot - 1][pin - 1]; | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | struct hw_pci __initdata nas100d_pci = { | 
 | 	.nr_controllers = 1, | 
 | 	.ops		= &ixp4xx_ops, | 
 | 	.preinit	= nas100d_pci_preinit, | 
 | 	.setup		= ixp4xx_setup, | 
 | 	.map_irq	= nas100d_map_irq, | 
 | }; | 
 |  | 
 | int __init nas100d_pci_init(void) | 
 | { | 
 | 	if (machine_is_nas100d()) | 
 | 		pci_common_init(&nas100d_pci); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | subsys_initcall(nas100d_pci_init); |