| /* | 
 |  * LP5521/LP5523/LP55231/LP5562 Common Driver | 
 |  * | 
 |  * Copyright 2012 Texas Instruments | 
 |  * | 
 |  * Author: Milo(Woogyom) Kim <milo.kim@ti.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * Derived from leds-lp5521.c, leds-lp5523.c | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_data/leds-lp55xx.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/of_gpio.h> | 
 |  | 
 | #include "leds-lp55xx-common.h" | 
 |  | 
 | /* External clock rate */ | 
 | #define LP55XX_CLK_32K			32768 | 
 |  | 
 | static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) | 
 | { | 
 | 	return container_of(cdev, struct lp55xx_led, cdev); | 
 | } | 
 |  | 
 | static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) | 
 | { | 
 | 	return cdev_to_lp55xx_led(dev_get_drvdata(dev)); | 
 | } | 
 |  | 
 | static void lp55xx_reset_device(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 | 	u8 addr = cfg->reset.addr; | 
 | 	u8 val  = cfg->reset.val; | 
 |  | 
 | 	/* no error checking here because no ACK from the device after reset */ | 
 | 	lp55xx_write(chip, addr, val); | 
 | } | 
 |  | 
 | static int lp55xx_detect_device(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 | 	u8 addr = cfg->enable.addr; | 
 | 	u8 val  = cfg->enable.val; | 
 | 	int ret; | 
 |  | 
 | 	ret = lp55xx_write(chip, addr, val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	usleep_range(1000, 2000); | 
 |  | 
 | 	ret = lp55xx_read(chip, addr, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (val != cfg->enable.val) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lp55xx_post_init_device(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 |  | 
 | 	if (!cfg->post_init_device) | 
 | 		return 0; | 
 |  | 
 | 	return cfg->post_init_device(chip); | 
 | } | 
 |  | 
 | static ssize_t lp55xx_show_current(struct device *dev, | 
 | 			    struct device_attribute *attr, | 
 | 			    char *buf) | 
 | { | 
 | 	struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
 |  | 
 | 	return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current); | 
 | } | 
 |  | 
 | static ssize_t lp55xx_store_current(struct device *dev, | 
 | 			     struct device_attribute *attr, | 
 | 			     const char *buf, size_t len) | 
 | { | 
 | 	struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
 | 	struct lp55xx_chip *chip = led->chip; | 
 | 	unsigned long curr; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &curr)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (curr > led->max_current) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!chip->cfg->set_led_current) | 
 | 		return len; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 | 	chip->cfg->set_led_current(led, (u8)curr); | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t lp55xx_show_max_current(struct device *dev, | 
 | 			    struct device_attribute *attr, | 
 | 			    char *buf) | 
 | { | 
 | 	struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
 |  | 
 | 	return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current, | 
 | 		lp55xx_store_current); | 
 | static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL); | 
 |  | 
 | static struct attribute *lp55xx_led_attrs[] = { | 
 | 	&dev_attr_led_current.attr, | 
 | 	&dev_attr_max_current.attr, | 
 | 	NULL, | 
 | }; | 
 | ATTRIBUTE_GROUPS(lp55xx_led); | 
 |  | 
 | static int lp55xx_set_brightness(struct led_classdev *cdev, | 
 | 			     enum led_brightness brightness) | 
 | { | 
 | 	struct lp55xx_led *led = cdev_to_lp55xx_led(cdev); | 
 | 	struct lp55xx_device_config *cfg = led->chip->cfg; | 
 |  | 
 | 	led->brightness = (u8)brightness; | 
 | 	return cfg->brightness_fn(led); | 
 | } | 
 |  | 
 | static int lp55xx_init_led(struct lp55xx_led *led, | 
 | 			struct lp55xx_chip *chip, int chan) | 
 | { | 
 | 	struct lp55xx_platform_data *pdata = chip->pdata; | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 | 	struct device *dev = &chip->cl->dev; | 
 | 	char name[32]; | 
 | 	int ret; | 
 | 	int max_channel = cfg->max_channel; | 
 |  | 
 | 	if (chan >= max_channel) { | 
 | 		dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (pdata->led_config[chan].led_current == 0) | 
 | 		return 0; | 
 |  | 
 | 	led->led_current = pdata->led_config[chan].led_current; | 
 | 	led->max_current = pdata->led_config[chan].max_current; | 
 | 	led->chan_nr = pdata->led_config[chan].chan_nr; | 
 | 	led->cdev.default_trigger = pdata->led_config[chan].default_trigger; | 
 |  | 
 | 	if (led->chan_nr >= max_channel) { | 
 | 		dev_err(dev, "Use channel numbers between 0 and %d\n", | 
 | 			max_channel - 1); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	led->cdev.brightness_set_blocking = lp55xx_set_brightness; | 
 | 	led->cdev.groups = lp55xx_led_groups; | 
 |  | 
 | 	if (pdata->led_config[chan].name) { | 
 | 		led->cdev.name = pdata->led_config[chan].name; | 
 | 	} else { | 
 | 		snprintf(name, sizeof(name), "%s:channel%d", | 
 | 			pdata->label ? : chip->cl->name, chan); | 
 | 		led->cdev.name = name; | 
 | 	} | 
 |  | 
 | 	ret = led_classdev_register(dev, &led->cdev); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "led register err: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) | 
 | { | 
 | 	struct lp55xx_chip *chip = context; | 
 | 	struct device *dev = &chip->cl->dev; | 
 | 	enum lp55xx_engine_index idx = chip->engine_idx; | 
 |  | 
 | 	if (!fw) { | 
 | 		dev_err(dev, "firmware request failed\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* handling firmware data is chip dependent */ | 
 | 	mutex_lock(&chip->lock); | 
 |  | 
 | 	chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD; | 
 | 	chip->fw = fw; | 
 | 	if (chip->cfg->firmware_cb) | 
 | 		chip->cfg->firmware_cb(chip); | 
 |  | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	/* firmware should be released for other channel use */ | 
 | 	release_firmware(chip->fw); | 
 | 	chip->fw = NULL; | 
 | } | 
 |  | 
 | static int lp55xx_request_firmware(struct lp55xx_chip *chip) | 
 | { | 
 | 	const char *name = chip->cl->name; | 
 | 	struct device *dev = &chip->cl->dev; | 
 |  | 
 | 	return request_firmware_nowait(THIS_MODULE, false, name, dev, | 
 | 				GFP_KERNEL, chip, lp55xx_firmware_loaded); | 
 | } | 
 |  | 
 | static ssize_t lp55xx_show_engine_select(struct device *dev, | 
 | 			    struct device_attribute *attr, | 
 | 			    char *buf) | 
 | { | 
 | 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
 | 	struct lp55xx_chip *chip = led->chip; | 
 |  | 
 | 	return sprintf(buf, "%d\n", chip->engine_idx); | 
 | } | 
 |  | 
 | static ssize_t lp55xx_store_engine_select(struct device *dev, | 
 | 			     struct device_attribute *attr, | 
 | 			     const char *buf, size_t len) | 
 | { | 
 | 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
 | 	struct lp55xx_chip *chip = led->chip; | 
 | 	unsigned long val; | 
 | 	int ret; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &val)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* select the engine to be run */ | 
 |  | 
 | 	switch (val) { | 
 | 	case LP55XX_ENGINE_1: | 
 | 	case LP55XX_ENGINE_2: | 
 | 	case LP55XX_ENGINE_3: | 
 | 		mutex_lock(&chip->lock); | 
 | 		chip->engine_idx = val; | 
 | 		ret = lp55xx_request_firmware(chip); | 
 | 		mutex_unlock(&chip->lock); | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (ret) { | 
 | 		dev_err(dev, "request firmware err: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start) | 
 | { | 
 | 	if (chip->cfg->run_engine) | 
 | 		chip->cfg->run_engine(chip, start); | 
 | } | 
 |  | 
 | static ssize_t lp55xx_store_engine_run(struct device *dev, | 
 | 			     struct device_attribute *attr, | 
 | 			     const char *buf, size_t len) | 
 | { | 
 | 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
 | 	struct lp55xx_chip *chip = led->chip; | 
 | 	unsigned long val; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &val)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* run or stop the selected engine */ | 
 |  | 
 | 	if (val <= 0) { | 
 | 		lp55xx_run_engine(chip, false); | 
 | 		return len; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 | 	lp55xx_run_engine(chip, true); | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR, | 
 | 		   lp55xx_show_engine_select, lp55xx_store_engine_select); | 
 | static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run); | 
 |  | 
 | static struct attribute *lp55xx_engine_attributes[] = { | 
 | 	&dev_attr_select_engine.attr, | 
 | 	&dev_attr_run_engine.attr, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static const struct attribute_group lp55xx_engine_attr_group = { | 
 | 	.attrs = lp55xx_engine_attributes, | 
 | }; | 
 |  | 
 | int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) | 
 | { | 
 | 	return i2c_smbus_write_byte_data(chip->cl, reg, val); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_write); | 
 |  | 
 | int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val) | 
 | { | 
 | 	s32 ret; | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(chip->cl, reg); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = ret; | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_read); | 
 |  | 
 | int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) | 
 | { | 
 | 	int ret; | 
 | 	u8 tmp; | 
 |  | 
 | 	ret = lp55xx_read(chip, reg, &tmp); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	tmp &= ~mask; | 
 | 	tmp |= val & mask; | 
 |  | 
 | 	return lp55xx_write(chip, reg, tmp); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_update_bits); | 
 |  | 
 | bool lp55xx_is_extclk_used(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct clk *clk; | 
 | 	int err; | 
 |  | 
 | 	clk = devm_clk_get(&chip->cl->dev, "32k_clk"); | 
 | 	if (IS_ERR(clk)) | 
 | 		goto use_internal_clk; | 
 |  | 
 | 	err = clk_prepare_enable(clk); | 
 | 	if (err) | 
 | 		goto use_internal_clk; | 
 |  | 
 | 	if (clk_get_rate(clk) != LP55XX_CLK_32K) { | 
 | 		clk_disable_unprepare(clk); | 
 | 		goto use_internal_clk; | 
 | 	} | 
 |  | 
 | 	dev_info(&chip->cl->dev, "%dHz external clock used\n",	LP55XX_CLK_32K); | 
 |  | 
 | 	chip->clk = clk; | 
 | 	return true; | 
 |  | 
 | use_internal_clk: | 
 | 	dev_info(&chip->cl->dev, "internal clock used\n"); | 
 | 	return false; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used); | 
 |  | 
 | int lp55xx_init_device(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_platform_data *pdata; | 
 | 	struct lp55xx_device_config *cfg; | 
 | 	struct device *dev = &chip->cl->dev; | 
 | 	int ret = 0; | 
 |  | 
 | 	WARN_ON(!chip); | 
 |  | 
 | 	pdata = chip->pdata; | 
 | 	cfg = chip->cfg; | 
 |  | 
 | 	if (!pdata || !cfg) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (gpio_is_valid(pdata->enable_gpio)) { | 
 | 		ret = devm_gpio_request_one(dev, pdata->enable_gpio, | 
 | 					    GPIOF_DIR_OUT, "lp5523_enable"); | 
 | 		if (ret < 0) { | 
 | 			dev_err(dev, "could not acquire enable gpio (err=%d)\n", | 
 | 				ret); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		gpio_set_value(pdata->enable_gpio, 0); | 
 | 		usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | 
 | 		gpio_set_value(pdata->enable_gpio, 1); | 
 | 		usleep_range(1000, 2000); /* 500us abs min. */ | 
 | 	} | 
 |  | 
 | 	lp55xx_reset_device(chip); | 
 |  | 
 | 	/* | 
 | 	 * Exact value is not available. 10 - 20ms | 
 | 	 * appears to be enough for reset. | 
 | 	 */ | 
 | 	usleep_range(10000, 20000); | 
 |  | 
 | 	ret = lp55xx_detect_device(chip); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "device detection err: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* chip specific initialization */ | 
 | 	ret = lp55xx_post_init_device(chip); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "post init device err: %d\n", ret); | 
 | 		goto err_post_init; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_post_init: | 
 | 	lp55xx_deinit_device(chip); | 
 | err: | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_init_device); | 
 |  | 
 | void lp55xx_deinit_device(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_platform_data *pdata = chip->pdata; | 
 |  | 
 | 	if (chip->clk) | 
 | 		clk_disable_unprepare(chip->clk); | 
 |  | 
 | 	if (gpio_is_valid(pdata->enable_gpio)) | 
 | 		gpio_set_value(pdata->enable_gpio, 0); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_deinit_device); | 
 |  | 
 | int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) | 
 | { | 
 | 	struct lp55xx_platform_data *pdata = chip->pdata; | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 | 	int num_channels = pdata->num_channels; | 
 | 	struct lp55xx_led *each; | 
 | 	u8 led_current; | 
 | 	int ret; | 
 | 	int i; | 
 |  | 
 | 	if (!cfg->brightness_fn) { | 
 | 		dev_err(&chip->cl->dev, "empty brightness configuration\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < num_channels; i++) { | 
 |  | 
 | 		/* do not initialize channels that are not connected */ | 
 | 		if (pdata->led_config[i].led_current == 0) | 
 | 			continue; | 
 |  | 
 | 		led_current = pdata->led_config[i].led_current; | 
 | 		each = led + i; | 
 | 		ret = lp55xx_init_led(each, chip, i); | 
 | 		if (ret) | 
 | 			goto err_init_led; | 
 |  | 
 | 		chip->num_leds++; | 
 | 		each->chip = chip; | 
 |  | 
 | 		/* setting led current at each channel */ | 
 | 		if (cfg->set_led_current) | 
 | 			cfg->set_led_current(each, led_current); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_init_led: | 
 | 	lp55xx_unregister_leds(led, chip); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_register_leds); | 
 |  | 
 | void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) | 
 | { | 
 | 	int i; | 
 | 	struct lp55xx_led *each; | 
 |  | 
 | 	for (i = 0; i < chip->num_leds; i++) { | 
 | 		each = led + i; | 
 | 		led_classdev_unregister(&each->cdev); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_unregister_leds); | 
 |  | 
 | int lp55xx_register_sysfs(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct device *dev = &chip->cl->dev; | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 | 	int ret; | 
 |  | 
 | 	if (!cfg->run_engine || !cfg->firmware_cb) | 
 | 		goto dev_specific_attrs; | 
 |  | 
 | 	ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | dev_specific_attrs: | 
 | 	return cfg->dev_attr_group ? | 
 | 		sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_register_sysfs); | 
 |  | 
 | void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) | 
 | { | 
 | 	struct device *dev = &chip->cl->dev; | 
 | 	struct lp55xx_device_config *cfg = chip->cfg; | 
 |  | 
 | 	if (cfg->dev_attr_group) | 
 | 		sysfs_remove_group(&dev->kobj, cfg->dev_attr_group); | 
 |  | 
 | 	sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group); | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); | 
 |  | 
 | struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, | 
 | 						      struct device_node *np) | 
 | { | 
 | 	struct device_node *child; | 
 | 	struct lp55xx_platform_data *pdata; | 
 | 	struct lp55xx_led_config *cfg; | 
 | 	int num_channels; | 
 | 	int i = 0; | 
 |  | 
 | 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
 | 	if (!pdata) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	num_channels = of_get_child_count(np); | 
 | 	if (num_channels == 0) { | 
 | 		dev_err(dev, "no LED channels\n"); | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 |  | 
 | 	cfg = devm_kcalloc(dev, num_channels, sizeof(*cfg), GFP_KERNEL); | 
 | 	if (!cfg) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	pdata->led_config = &cfg[0]; | 
 | 	pdata->num_channels = num_channels; | 
 |  | 
 | 	for_each_child_of_node(np, child) { | 
 | 		cfg[i].chan_nr = i; | 
 |  | 
 | 		of_property_read_string(child, "chan-name", &cfg[i].name); | 
 | 		of_property_read_u8(child, "led-cur", &cfg[i].led_current); | 
 | 		of_property_read_u8(child, "max-cur", &cfg[i].max_current); | 
 | 		cfg[i].default_trigger = | 
 | 			of_get_property(child, "linux,default-trigger", NULL); | 
 |  | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	of_property_read_string(np, "label", &pdata->label); | 
 | 	of_property_read_u8(np, "clock-mode", &pdata->clock_mode); | 
 |  | 
 | 	pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); | 
 |  | 
 | 	/* LP8501 specific */ | 
 | 	of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel); | 
 |  | 
 | 	return pdata; | 
 | } | 
 | EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata); | 
 |  | 
 | MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); | 
 | MODULE_DESCRIPTION("LP55xx Common Driver"); | 
 | MODULE_LICENSE("GPL"); |