| /* | 
 |   SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying | 
 |   file Documentation/scsi/st.txt for more information. | 
 |  | 
 |   History: | 
 |  | 
 |   OnStream SCSI Tape support (osst) cloned from st.c by | 
 |   Willem Riede (osst@riede.org) Feb 2000 | 
 |   Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000 | 
 |  | 
 |   Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara. | 
 |   Contribution and ideas from several people including (in alphabetical | 
 |   order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer, | 
 |   Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale. | 
 |  | 
 |   Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede | 
 | 	 email osst@riede.org | 
 |  | 
 |   $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ | 
 |  | 
 |   Microscopic alterations - Rik Ling, 2000/12/21 | 
 |   Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara | 
 |   Some small formal changes - aeb, 950809 | 
 | */ | 
 |  | 
 | static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $"; | 
 | static const char * osst_version = "0.99.4"; | 
 |  | 
 | /* The "failure to reconnect" firmware bug */ | 
 | #define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/ | 
 | #define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/ | 
 | #define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7) | 
 |  | 
 | #include <linux/module.h> | 
 |  | 
 | #include <linux/fs.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/sched/signal.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/init.h> | 
 | #include <linux/string.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/mtio.h> | 
 | #include <linux/ioctl.h> | 
 | #include <linux/fcntl.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/vmalloc.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/dma.h> | 
 |  | 
 | /* The driver prints some debugging information on the console if DEBUG | 
 |    is defined and non-zero. */ | 
 | #define DEBUG 0 | 
 |  | 
 | /* The message level for the debug messages is currently set to KERN_NOTICE | 
 |    so that people can easily see the messages. Later when the debugging messages | 
 |    in the drivers are more widely classified, this may be changed to KERN_DEBUG. */ | 
 | #define OSST_DEB_MSG  KERN_NOTICE | 
 |  | 
 | #include <scsi/scsi.h> | 
 | #include <scsi/scsi_dbg.h> | 
 | #include <scsi/scsi_device.h> | 
 | #include <scsi/scsi_driver.h> | 
 | #include <scsi/scsi_eh.h> | 
 | #include <scsi/scsi_host.h> | 
 | #include <scsi/scsi_ioctl.h> | 
 |  | 
 | #define ST_KILOBYTE 1024 | 
 |  | 
 | #include "st.h" | 
 | #include "osst.h" | 
 | #include "osst_options.h" | 
 | #include "osst_detect.h" | 
 |  | 
 | static DEFINE_MUTEX(osst_int_mutex); | 
 | static int max_dev = 0; | 
 | static int write_threshold_kbs = 0; | 
 | static int max_sg_segs = 0; | 
 |  | 
 | #ifdef MODULE | 
 | MODULE_AUTHOR("Willem Riede"); | 
 | MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR); | 
 | MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE); | 
 |  | 
 | module_param(max_dev, int, 0444); | 
 | MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)"); | 
 |  | 
 | module_param(write_threshold_kbs, int, 0644); | 
 | MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)"); | 
 |  | 
 | module_param(max_sg_segs, int, 0644); | 
 | MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)"); | 
 | #else | 
 | static struct osst_dev_parm { | 
 |        char   *name; | 
 |        int    *val; | 
 | } parms[] __initdata = { | 
 |        { "max_dev",             &max_dev             }, | 
 |        { "write_threshold_kbs", &write_threshold_kbs }, | 
 |        { "max_sg_segs",         &max_sg_segs         } | 
 | }; | 
 | #endif | 
 |  | 
 | /* Some default definitions have been moved to osst_options.h */ | 
 | #define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE) | 
 | #define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE) | 
 |  | 
 | /* The buffer size should fit into the 24 bits for length in the | 
 |    6-byte SCSI read and write commands. */ | 
 | #if OSST_BUFFER_SIZE >= (2 << 24 - 1) | 
 | #error "Buffer size should not exceed (2 << 24 - 1) bytes!" | 
 | #endif | 
 |  | 
 | #if DEBUG | 
 | static int debugging = 1; | 
 | /* uncomment define below to test error recovery */ | 
 | // #define OSST_INJECT_ERRORS 1  | 
 | #endif | 
 |  | 
 | /* Do not retry! The drive firmware already retries when appropriate, | 
 |    and when it tries to tell us something, we had better listen... */ | 
 | #define MAX_RETRIES 0 | 
 |  | 
 | #define NO_TAPE  NOT_READY | 
 |  | 
 | #define OSST_WAIT_POSITION_COMPLETE   (HZ > 200 ? HZ / 200 : 1) | 
 | #define OSST_WAIT_WRITE_COMPLETE      (HZ / 12) | 
 | #define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2) | 
 | 	 | 
 | #define OSST_TIMEOUT (200 * HZ) | 
 | #define OSST_LONG_TIMEOUT (1800 * HZ) | 
 |  | 
 | #define TAPE_NR(x) (iminor(x) & ~(-1 << ST_MODE_SHIFT)) | 
 | #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT) | 
 | #define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0) | 
 | #define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1)) | 
 |  | 
 | /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower | 
 |    24 bits) */ | 
 | #define SET_DENS_AND_BLK 0x10001 | 
 |  | 
 | static int osst_buffer_size       = OSST_BUFFER_SIZE; | 
 | static int osst_write_threshold   = OSST_WRITE_THRESHOLD; | 
 | static int osst_max_sg_segs       = OSST_MAX_SG; | 
 | static int osst_max_dev           = OSST_MAX_TAPES; | 
 | static int osst_nr_dev; | 
 |  | 
 | static struct osst_tape **os_scsi_tapes = NULL; | 
 | static DEFINE_RWLOCK(os_scsi_tapes_lock); | 
 |  | 
 | static int modes_defined = 0; | 
 |  | 
 | static struct osst_buffer *new_tape_buffer(int, int, int); | 
 | static int enlarge_buffer(struct osst_buffer *, int); | 
 | static void normalize_buffer(struct osst_buffer *); | 
 | static int append_to_buffer(const char __user *, struct osst_buffer *, int); | 
 | static int from_buffer(struct osst_buffer *, char __user *, int); | 
 | static int osst_zero_buffer_tail(struct osst_buffer *); | 
 | static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *); | 
 | static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *); | 
 |  | 
 | static int osst_probe(struct device *); | 
 | static int osst_remove(struct device *); | 
 |  | 
 | static struct scsi_driver osst_template = { | 
 | 	.gendrv = { | 
 | 		.name		=  "osst", | 
 | 		.owner		= THIS_MODULE, | 
 | 		.probe		= osst_probe, | 
 | 		.remove		= osst_remove, | 
 | 	} | 
 | }; | 
 |  | 
 | static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt, | 
 | 			    unsigned int cmd_in, unsigned long arg); | 
 |  | 
 | static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip); | 
 |  | 
 | static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt); | 
 |  | 
 | static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt); | 
 |  | 
 | static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending); | 
 |  | 
 | static inline char *tape_name(struct osst_tape *tape) | 
 | { | 
 | 	return tape->drive->disk_name; | 
 | } | 
 |  | 
 | /* Routines that handle the interaction with mid-layer SCSI routines */ | 
 |  | 
 |  | 
 | /* Normalize Sense */ | 
 | static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s) | 
 | { | 
 | 	const u8 *ucp; | 
 | 	const u8 *sense = SRpnt->sense; | 
 |  | 
 | 	s->have_sense = scsi_normalize_sense(SRpnt->sense, | 
 | 				SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); | 
 | 	s->flags = 0; | 
 |  | 
 | 	if (s->have_sense) { | 
 | 		s->deferred = 0; | 
 | 		s->remainder_valid = | 
 | 			scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64); | 
 | 		switch (sense[0] & 0x7f) { | 
 | 		case 0x71: | 
 | 			s->deferred = 1; | 
 | 		case 0x70: | 
 | 			s->fixed_format = 1; | 
 | 			s->flags = sense[2] & 0xe0; | 
 | 			break; | 
 | 		case 0x73: | 
 | 			s->deferred = 1; | 
 | 		case 0x72: | 
 | 			s->fixed_format = 0; | 
 | 			ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4); | 
 | 			s->flags = ucp ? (ucp[3] & 0xe0) : 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Convert the result to success code */ | 
 | static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) | 
 | { | 
 | 	char *name = tape_name(STp); | 
 | 	int result = SRpnt->result; | 
 | 	u8 * sense = SRpnt->sense, scode; | 
 | #if DEBUG | 
 | 	const char *stp; | 
 | #endif | 
 | 	struct st_cmdstatus *cmdstatp; | 
 |  | 
 | 	if (!result) | 
 | 		return 0; | 
 |  | 
 | 	cmdstatp = &STp->buffer->cmdstat; | 
 | 	osst_analyze_sense(SRpnt, cmdstatp); | 
 |  | 
 | 	if (cmdstatp->have_sense) | 
 | 		scode = STp->buffer->cmdstat.sense_hdr.sense_key; | 
 | 	else | 
 | 		scode = 0; | 
 | #if DEBUG | 
 | 	if (debugging) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n", | 
 | 		   name, result, | 
 | 		   SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], | 
 | 		   SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); | 
 | 		if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n", | 
 | 				  name, scode, sense[12], sense[13]); | 
 | 		if (cmdstatp->have_sense) | 
 | 			__scsi_print_sense(STp->device, name, | 
 | 					   SRpnt->sense, SCSI_SENSE_BUFFERSIZE); | 
 | 	} | 
 | 	else | 
 | #endif | 
 | 	if (cmdstatp->have_sense && ( | 
 | 		 scode != NO_SENSE && | 
 | 		 scode != RECOVERED_ERROR && | 
 | /*      	 scode != UNIT_ATTENTION && */ | 
 | 		 scode != BLANK_CHECK && | 
 | 		 scode != VOLUME_OVERFLOW && | 
 | 		 SRpnt->cmd[0] != MODE_SENSE && | 
 | 		 SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */ | 
 | 		if (cmdstatp->have_sense) { | 
 | 			printk(KERN_WARNING "%s:W: Command with sense data:\n", name); | 
 | 			__scsi_print_sense(STp->device, name, | 
 | 					   SRpnt->sense, SCSI_SENSE_BUFFERSIZE); | 
 | 		} | 
 | 		else { | 
 | 			static	int	notyetprinted = 1; | 
 |  | 
 | 			printk(KERN_WARNING | 
 | 			     "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n", | 
 | 			     name, result, driver_byte(result), | 
 | 			     host_byte(result)); | 
 | 			if (notyetprinted) { | 
 | 				notyetprinted = 0; | 
 | 				printk(KERN_INFO | 
 | 					"%s:I: This warning may be caused by your scsi controller,\n", name); | 
 | 				printk(KERN_INFO | 
 | 					"%s:I: it has been reported with some Buslogic cards.\n", name); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	STp->pos_unknown |= STp->device->was_reset; | 
 |  | 
 | 	if (cmdstatp->have_sense && scode == RECOVERED_ERROR) { | 
 | 		STp->recover_count++; | 
 | 		STp->recover_erreg++; | 
 | #if DEBUG | 
 | 		if (debugging) { | 
 | 			if (SRpnt->cmd[0] == READ_6) | 
 | 				stp = "read"; | 
 | 			else if (SRpnt->cmd[0] == WRITE_6) | 
 | 				stp = "write"; | 
 | 			else | 
 | 				stp = "ioctl"; | 
 | 			printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp, | 
 | 					     STp->recover_count); | 
 | 		} | 
 | #endif | 
 | 		if ((sense[2] & 0xe0) == 0) | 
 | 			return 0; | 
 | 	} | 
 | 	return (-EIO); | 
 | } | 
 |  | 
 |  | 
 | /* Wakeup from interrupt */ | 
 | static void osst_end_async(struct request *req, blk_status_t status) | 
 | { | 
 | 	struct scsi_request *rq = scsi_req(req); | 
 | 	struct osst_request *SRpnt = req->end_io_data; | 
 | 	struct osst_tape *STp = SRpnt->stp; | 
 | 	struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; | 
 |  | 
 | 	STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result; | 
 | #if DEBUG | 
 | 	STp->write_pending = 0; | 
 | #endif | 
 | 	if (rq->sense_len) | 
 | 		memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE); | 
 | 	if (SRpnt->waiting) | 
 | 		complete(SRpnt->waiting); | 
 |  | 
 | 	if (SRpnt->bio) { | 
 | 		kfree(mdata->pages); | 
 | 		blk_rq_unmap_user(SRpnt->bio); | 
 | 	} | 
 |  | 
 | 	__blk_put_request(req->q, req); | 
 | } | 
 |  | 
 | /* osst_request memory management */ | 
 | static struct osst_request *osst_allocate_request(void) | 
 | { | 
 | 	return kzalloc(sizeof(struct osst_request), GFP_KERNEL); | 
 | } | 
 |  | 
 | static void osst_release_request(struct osst_request *streq) | 
 | { | 
 | 	kfree(streq); | 
 | } | 
 |  | 
 | static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd, | 
 | 			int cmd_len, int data_direction, void *buffer, unsigned bufflen, | 
 | 			int use_sg, int timeout, int retries) | 
 | { | 
 | 	struct request *req; | 
 | 	struct scsi_request *rq; | 
 | 	struct page **pages = NULL; | 
 | 	struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; | 
 |  | 
 | 	int err = 0; | 
 | 	int write = (data_direction == DMA_TO_DEVICE); | 
 |  | 
 | 	req = blk_get_request(SRpnt->stp->device->request_queue, | 
 | 			write ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0); | 
 | 	if (IS_ERR(req)) | 
 | 		return DRIVER_ERROR << 24; | 
 |  | 
 | 	rq = scsi_req(req); | 
 | 	req->rq_flags |= RQF_QUIET; | 
 |  | 
 | 	SRpnt->bio = NULL; | 
 |  | 
 | 	if (use_sg) { | 
 | 		struct scatterlist *sg, *sgl = (struct scatterlist *)buffer; | 
 | 		int i; | 
 |  | 
 | 		pages = kcalloc(use_sg, sizeof(struct page *), GFP_KERNEL); | 
 | 		if (!pages) | 
 | 			goto free_req; | 
 |  | 
 | 		for_each_sg(sgl, sg, use_sg, i) | 
 | 			pages[i] = sg_page(sg); | 
 |  | 
 | 		mdata->null_mapped = 1; | 
 |  | 
 | 		mdata->page_order = get_order(sgl[0].length); | 
 | 		mdata->nr_entries = | 
 | 			DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order); | 
 | 		mdata->offset = 0; | 
 |  | 
 | 		err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL); | 
 | 		if (err) { | 
 | 			kfree(pages); | 
 | 			goto free_req; | 
 | 		} | 
 | 		SRpnt->bio = req->bio; | 
 | 		mdata->pages = pages; | 
 |  | 
 | 	} else if (bufflen) { | 
 | 		err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL); | 
 | 		if (err) | 
 | 			goto free_req; | 
 | 	} | 
 |  | 
 | 	rq->cmd_len = cmd_len; | 
 | 	memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ | 
 | 	memcpy(rq->cmd, cmd, rq->cmd_len); | 
 | 	req->timeout = timeout; | 
 | 	rq->retries = retries; | 
 | 	req->end_io_data = SRpnt; | 
 |  | 
 | 	blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async); | 
 | 	return 0; | 
 | free_req: | 
 | 	blk_put_request(req); | 
 | 	return DRIVER_ERROR << 24; | 
 | } | 
 |  | 
 | /* Do the scsi command. Waits until command performed if do_wait is true. | 
 |    Otherwise osst_write_behind_check() is used to check that the command | 
 |    has finished. */ | 
 | static	struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp,  | 
 | 	unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait) | 
 | { | 
 | 	unsigned char *bp; | 
 | 	unsigned short use_sg; | 
 | #ifdef OSST_INJECT_ERRORS | 
 | 	static   int   inject = 0; | 
 | 	static   int   repeat = 0; | 
 | #endif | 
 | 	struct completion *waiting; | 
 |  | 
 | 	/* if async, make sure there's no command outstanding */ | 
 | 	if (!do_wait && ((STp->buffer)->last_SRpnt)) { | 
 | 		printk(KERN_ERR "%s: Async command already active.\n", | 
 | 		       tape_name(STp)); | 
 | 		if (signal_pending(current)) | 
 | 			(STp->buffer)->syscall_result = (-EINTR); | 
 | 		else | 
 | 			(STp->buffer)->syscall_result = (-EBUSY); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	if (SRpnt == NULL) { | 
 | 		SRpnt = osst_allocate_request(); | 
 | 		if (SRpnt == NULL) { | 
 | 			printk(KERN_ERR "%s: Can't allocate SCSI request.\n", | 
 | 				     tape_name(STp)); | 
 | 			if (signal_pending(current)) | 
 | 				(STp->buffer)->syscall_result = (-EINTR); | 
 | 			else | 
 | 				(STp->buffer)->syscall_result = (-EBUSY); | 
 | 			return NULL; | 
 | 		} | 
 | 		SRpnt->stp = STp; | 
 | 	} | 
 |  | 
 | 	/* If async IO, set last_SRpnt. This ptr tells write_behind_check | 
 | 	   which IO is outstanding. It's nulled out when the IO completes. */ | 
 | 	if (!do_wait) | 
 | 		(STp->buffer)->last_SRpnt = SRpnt; | 
 |  | 
 | 	waiting = &STp->wait; | 
 | 	init_completion(waiting); | 
 | 	SRpnt->waiting = waiting; | 
 |  | 
 | 	use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0; | 
 | 	if (use_sg) { | 
 | 		bp = (char *)&(STp->buffer->sg[0]); | 
 | 		if (STp->buffer->sg_segs < use_sg) | 
 | 			use_sg = STp->buffer->sg_segs; | 
 | 	} | 
 | 	else | 
 | 		bp = (STp->buffer)->b_data; | 
 |  | 
 | 	memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); | 
 | 	STp->buffer->cmdstat.have_sense = 0; | 
 | 	STp->buffer->syscall_result = 0; | 
 |  | 
 | 	if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, | 
 | 			 use_sg, timeout, retries)) | 
 | 		/* could not allocate the buffer or request was too large */ | 
 | 		(STp->buffer)->syscall_result = (-EBUSY); | 
 | 	else if (do_wait) { | 
 | 		wait_for_completion(waiting); | 
 | 		SRpnt->waiting = NULL; | 
 | 		STp->buffer->syscall_result = osst_chk_result(STp, SRpnt); | 
 | #ifdef OSST_INJECT_ERRORS | 
 | 		if (STp->buffer->syscall_result == 0 && | 
 | 		    cmd[0] == READ_6 && | 
 | 		    cmd[4] &&  | 
 | 		    ( (++ inject % 83) == 29  || | 
 | 		      (STp->first_frame_position == 240  | 
 | 			         /* or STp->read_error_frame to fail again on the block calculated above */ && | 
 | 				 ++repeat < 3))) { | 
 | 			printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp)); | 
 | 			STp->buffer->last_result_fatal = 1; | 
 | 		} | 
 | #endif | 
 | 	} | 
 | 	return SRpnt; | 
 | } | 
 |  | 
 |  | 
 | /* Handle the write-behind checking (downs the semaphore) */ | 
 | static void osst_write_behind_check(struct osst_tape *STp) | 
 | { | 
 | 	struct osst_buffer * STbuffer; | 
 |  | 
 | 	STbuffer = STp->buffer; | 
 |  | 
 | #if DEBUG | 
 | 	if (STp->write_pending) | 
 | 		STp->nbr_waits++; | 
 | 	else | 
 | 		STp->nbr_finished++; | 
 | #endif | 
 | 	wait_for_completion(&(STp->wait)); | 
 | 	STp->buffer->last_SRpnt->waiting = NULL; | 
 |  | 
 | 	STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt); | 
 |  | 
 | 	if (STp->buffer->syscall_result) | 
 | 		STp->buffer->syscall_result = | 
 | 			osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1); | 
 | 	else | 
 | 		STp->first_frame_position++; | 
 |  | 
 | 	osst_release_request(STp->buffer->last_SRpnt); | 
 |  | 
 | 	if (STbuffer->writing < STbuffer->buffer_bytes) | 
 | 		printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n"); | 
 |  | 
 | 	STbuffer->last_SRpnt = NULL; | 
 | 	STbuffer->buffer_bytes -= STbuffer->writing; | 
 | 	STbuffer->writing = 0; | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* Onstream specific Routines */ | 
 | /* | 
 |  * Initialize the OnStream AUX | 
 |  */ | 
 | static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number, | 
 | 					 int logical_blk_num, int blk_sz, int blk_cnt) | 
 | { | 
 | 	os_aux_t       *aux = STp->buffer->aux; | 
 | 	os_partition_t *par = &aux->partition; | 
 | 	os_dat_t       *dat = &aux->dat; | 
 |  | 
 | 	if (STp->raw) return; | 
 |  | 
 | 	memset(aux, 0, sizeof(*aux)); | 
 | 	aux->format_id = htonl(0); | 
 | 	memcpy(aux->application_sig, "LIN4", 4); | 
 | 	aux->hdwr = htonl(0); | 
 | 	aux->frame_type = frame_type; | 
 |  | 
 | 	switch (frame_type) { | 
 | 	  case	OS_FRAME_TYPE_HEADER: | 
 | 		aux->update_frame_cntr    = htonl(STp->update_frame_cntr); | 
 | 		par->partition_num        = OS_CONFIG_PARTITION; | 
 | 		par->par_desc_ver         = OS_PARTITION_VERSION; | 
 | 		par->wrt_pass_cntr        = htons(0xffff); | 
 | 		/* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */ | 
 | 		par->first_frame_ppos     = htonl(0); | 
 | 		par->last_frame_ppos      = htonl(0xbb7); | 
 | 		aux->frame_seq_num        = htonl(0); | 
 | 		aux->logical_blk_num_high = htonl(0); | 
 | 		aux->logical_blk_num      = htonl(0); | 
 | 		aux->next_mark_ppos       = htonl(STp->first_mark_ppos); | 
 | 		break; | 
 | 	  case	OS_FRAME_TYPE_DATA: | 
 | 	  case	OS_FRAME_TYPE_MARKER: | 
 | 		dat->dat_sz = 8; | 
 | 		dat->reserved1 = 0; | 
 | 		dat->entry_cnt = 1; | 
 | 		dat->reserved3 = 0; | 
 | 		dat->dat_list[0].blk_sz   = htonl(blk_sz); | 
 | 		dat->dat_list[0].blk_cnt  = htons(blk_cnt); | 
 | 		dat->dat_list[0].flags    = frame_type==OS_FRAME_TYPE_MARKER? | 
 | 							OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA; | 
 | 		dat->dat_list[0].reserved = 0; | 
 | 	  case	OS_FRAME_TYPE_EOD: | 
 | 		aux->update_frame_cntr    = htonl(0); | 
 | 		par->partition_num        = OS_DATA_PARTITION; | 
 | 		par->par_desc_ver         = OS_PARTITION_VERSION; | 
 | 		par->wrt_pass_cntr        = htons(STp->wrt_pass_cntr); | 
 | 		par->first_frame_ppos     = htonl(STp->first_data_ppos); | 
 | 		par->last_frame_ppos      = htonl(STp->capacity); | 
 | 		aux->frame_seq_num        = htonl(frame_seq_number); | 
 | 		aux->logical_blk_num_high = htonl(0); | 
 | 		aux->logical_blk_num      = htonl(logical_blk_num); | 
 | 		break; | 
 | 	  default: ; /* probably FILL */ | 
 | 	} | 
 | 	aux->filemark_cnt = htonl(STp->filemark_cnt); | 
 | 	aux->phys_fm = htonl(0xffffffff); | 
 | 	aux->last_mark_ppos = htonl(STp->last_mark_ppos); | 
 | 	aux->last_mark_lbn  = htonl(STp->last_mark_lbn); | 
 | } | 
 |  | 
 | /* | 
 |  * Verify that we have the correct tape frame | 
 |  */ | 
 | static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet) | 
 | { | 
 | 	char               * name = tape_name(STp); | 
 | 	os_aux_t           * aux  = STp->buffer->aux; | 
 | 	os_partition_t     * par  = &(aux->partition); | 
 | 	struct st_partstat * STps = &(STp->ps[STp->partition]); | 
 | 	unsigned int	     blk_cnt, blk_sz, i; | 
 |  | 
 | 	if (STp->raw) { | 
 | 		if (STp->buffer->syscall_result) { | 
 | 			for (i=0; i < STp->buffer->sg_segs; i++) | 
 | 				memset(page_address(sg_page(&STp->buffer->sg[i])), | 
 | 				       0, STp->buffer->sg[i].length); | 
 | 			strcpy(STp->buffer->b_data, "READ ERROR ON FRAME"); | 
 |                 } else | 
 | 			STp->buffer->buffer_bytes = OS_FRAME_SIZE; | 
 | 		return 1; | 
 | 	} | 
 | 	if (STp->buffer->syscall_result) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	if (ntohl(aux->format_id) != 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id)); | 
 | #endif | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 && | 
 | 	    (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name); | 
 | #endif | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (par->partition_num != OS_DATA_PARTITION) { | 
 | 		if (!STp->linux_media || STp->linux_media_version != 2) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n", | 
 | 					    name, par->partition_num); | 
 | #endif | 
 | 			goto err_out; | 
 | 		} | 
 | 	} | 
 | 	if (par->par_desc_ver != OS_PARTITION_VERSION) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver); | 
 | #endif | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n",  | 
 | 				    name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr); | 
 | #endif | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (aux->frame_type != OS_FRAME_TYPE_DATA && | 
 | 	    aux->frame_type != OS_FRAME_TYPE_EOD && | 
 | 	    aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 		if (!quiet) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type); | 
 | #endif | 
 | 		} | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (aux->frame_type == OS_FRAME_TYPE_EOD && | 
 | 	    STp->first_frame_position < STp->eod_frame_ppos) { | 
 | 		printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name, | 
 | 				 STp->first_frame_position); | 
 | 		goto err_out; | 
 | 	} | 
 |         if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) { | 
 | 		if (!quiet) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n",  | 
 | 					    name, ntohl(aux->frame_seq_num), frame_seq_number); | 
 | #endif | 
 | 		} | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (aux->frame_type == OS_FRAME_TYPE_MARKER) { | 
 | 		STps->eof = ST_FM_HIT; | 
 |  | 
 | 		i = ntohl(aux->filemark_cnt); | 
 | 		if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt || | 
 | 		    STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name, | 
 | 				  STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected", | 
 | 				  i, STp->first_frame_position - 1); | 
 | #endif | 
 | 			STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1); | 
 | 			if (i >= STp->filemark_cnt) | 
 | 				 STp->filemark_cnt = i+1; | 
 | 		} | 
 | 	} | 
 | 	if (aux->frame_type == OS_FRAME_TYPE_EOD) { | 
 | 		STps->eof = ST_EOD_1; | 
 | 		STp->frame_in_buffer = 1; | 
 | 	} | 
 | 	if (aux->frame_type == OS_FRAME_TYPE_DATA) { | 
 |                 blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt); | 
 | 		blk_sz  = ntohl(aux->dat.dat_list[0].blk_sz); | 
 | 		STp->buffer->buffer_bytes = blk_cnt * blk_sz; | 
 | 		STp->buffer->read_pointer = 0; | 
 | 		STp->frame_in_buffer = 1; | 
 |  | 
 | 		/* See what block size was used to write file */ | 
 | 		if (STp->block_size != blk_sz && blk_sz > 0) { | 
 | 			printk(KERN_INFO | 
 | 	    	"%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n", | 
 |        				name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k', | 
 | 				STp->block_size<1024?STp->block_size:STp->block_size/1024, | 
 | 				STp->block_size<1024?'b':'k'); | 
 | 			STp->block_size            = blk_sz; | 
 | 			STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz; | 
 | 		} | 
 | 		STps->eof = ST_NOEOF; | 
 | 	} | 
 |         STp->frame_seq_number = ntohl(aux->frame_seq_num); | 
 | 	STp->logical_blk_num  = ntohl(aux->logical_blk_num); | 
 | 	return 1; | 
 |  | 
 | err_out: | 
 | 	if (STp->read_error_frame == 0) | 
 | 		STp->read_error_frame = STp->first_frame_position - 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait for the unit to become Ready | 
 |  */ | 
 | static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 				 unsigned timeout, int initial_delay) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	unsigned long		startwait = jiffies; | 
 | #if DEBUG | 
 | 	int			dbg  = debugging; | 
 | 	char    	      * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name); | 
 | #endif | 
 |  | 
 | 	if (initial_delay > 0) | 
 | 		msleep(jiffies_to_msecs(initial_delay)); | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	*aSRpnt = SRpnt; | 
 | 	if (!SRpnt) return (-EBUSY); | 
 |  | 
 | 	while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && | 
 | 	       (( SRpnt->sense[2]  == 2 && SRpnt->sense[12] == 4    && | 
 | 		 (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)    ) || | 
 | 		( SRpnt->sense[2]  == 6 && SRpnt->sense[12] == 0x28 && | 
 | 		  SRpnt->sense[13] == 0                                        )  )) { | 
 | #if DEBUG | 
 | 	    if (debugging) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name); | 
 | 		printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); | 
 | 		debugging = 0; | 
 | 	    } | 
 | #endif | 
 | 	    msleep(100); | 
 |  | 
 | 	    memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	    cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 	    SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 | #if DEBUG | 
 | 	debugging = dbg; | 
 | #endif | 
 | 	if ( STp->buffer->syscall_result && | 
 | 	     osst_write_error_recovery(STp, aSRpnt, 0) ) { | 
 | #if DEBUG | 
 | 	    printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name); | 
 | 	    printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, | 
 | 			STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], | 
 | 			SRpnt->sense[12], SRpnt->sense[13]); | 
 | #endif | 
 | 	    return (-EIO); | 
 | 	} | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait for a tape to be inserted in the unit | 
 |  */ | 
 | static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	unsigned long		startwait = jiffies; | 
 | #if DEBUG | 
 | 	int			dbg = debugging; | 
 | 	char    	      * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name); | 
 | #endif | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	*aSRpnt = SRpnt; | 
 | 	if (!SRpnt) return (-EBUSY); | 
 |  | 
 | 	while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) && | 
 | 		SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0  ) { | 
 | #if DEBUG | 
 | 	    if (debugging) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name); | 
 | 		printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); | 
 | 		debugging = 0; | 
 | 	    } | 
 | #endif | 
 | 	    msleep(100); | 
 |  | 
 | 	    memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	    cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 	    SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 | #if DEBUG | 
 | 	debugging = dbg; | 
 | #endif | 
 | 	if ( STp->buffer->syscall_result     && SRpnt->sense[2]  != 2 && | 
 | 	     SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) { | 
 | #if DEBUG | 
 | 	    printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name); | 
 | 	    printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name, | 
 | 			STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2], | 
 | 			SRpnt->sense[12], SRpnt->sense[13]); | 
 | #endif | 
 | 	    return 0; | 
 | 	} | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name); | 
 | #endif | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame) | 
 | { | 
 | 	int	retval; | 
 |  | 
 | 	osst_wait_ready(STp, aSRpnt, 15 * 60, 0);			/* TODO - can this catch a write error? */ | 
 | 	retval = osst_set_frame_position(STp, aSRpnt, frame, 0); | 
 | 	if (retval) return (retval); | 
 | 	osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE); | 
 | 	return (osst_get_frame_position(STp, aSRpnt)); | 
 | } | 
 |  | 
 | /* | 
 |  * Wait for write(s) to complete | 
 |  */ | 
 | static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	int			result = 0; | 
 | 	int			delay  = OSST_WAIT_WRITE_COMPLETE; | 
 | #if DEBUG | 
 | 	char		      * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name); | 
 | #endif | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = WRITE_FILEMARKS; | 
 | 	cmd[1] = 1; | 
 |  | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	*aSRpnt = SRpnt; | 
 | 	if (!SRpnt) return (-EBUSY); | 
 | 	if (STp->buffer->syscall_result) { | 
 | 		if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) { | 
 | 			if (SRpnt->sense[13] == 8) { | 
 | 				delay = OSST_WAIT_LONG_WRITE_COMPLETE; | 
 | 			} | 
 | 		} else | 
 | 			result = osst_write_error_recovery(STp, aSRpnt, 0); | 
 | 	} | 
 | 	result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay); | 
 | 	STp->ps[STp->partition].rw = OS_WRITING_COMPLETE; | 
 |  | 
 | 	return (result); | 
 | } | 
 |  | 
 | #define OSST_POLL_PER_SEC 10 | 
 | static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to) | 
 | { | 
 | 	unsigned long	startwait = jiffies; | 
 | 	char	      * name      = tape_name(STp); | 
 | #if DEBUG | 
 | 	char	   notyetprinted  = 1; | 
 | #endif | 
 | 	if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING) | 
 | 		printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name); | 
 |  | 
 | 	while (time_before (jiffies, startwait + to*HZ)) | 
 | 	{  | 
 | 		int result; | 
 | 		result = osst_get_frame_position(STp, aSRpnt); | 
 | 		if (result == -EIO) | 
 | 			if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0) | 
 | 				return 0;	/* successful recovery leaves drive ready for frame */ | 
 | 		if (result < 0) break; | 
 | 		if (STp->first_frame_position == curr && | 
 | 		    ((minlast < 0 && | 
 | 		      (signed)STp->last_frame_position > (signed)curr + minlast) || | 
 | 		     (minlast >= 0 && STp->cur_frames > minlast) | 
 | 		    ) && result >= 0) | 
 | 		{ | 
 | #if DEBUG			 | 
 | 			if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC)) | 
 | 				printk (OSST_DEB_MSG | 
 | 					"%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n", | 
 | 					name, curr, curr+minlast, STp->first_frame_position, | 
 | 					STp->last_frame_position, STp->cur_frames, | 
 | 					result, (jiffies-startwait)/HZ,  | 
 | 					(((jiffies-startwait)%HZ)*10)/HZ); | 
 | #endif | 
 | 			return 0; | 
 | 		} | 
 | #if DEBUG | 
 | 		if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted) | 
 | 		{ | 
 | 			printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n", | 
 | 				name, curr, curr+minlast, STp->first_frame_position, | 
 | 				STp->last_frame_position, STp->cur_frames, result); | 
 | 			notyetprinted--; | 
 | 		} | 
 | #endif | 
 | 		msleep(1000 / OSST_POLL_PER_SEC); | 
 | 	} | 
 | #if DEBUG | 
 | 	printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n", | 
 | 		name, curr, curr+minlast, STp->first_frame_position, | 
 | 		STp->last_frame_position, STp->cur_frames, | 
 | 		(jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ); | 
 | #endif	 | 
 | 	return -EBUSY; | 
 | } | 
 |  | 
 | static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing) | 
 | { | 
 | 	struct osst_request   * SRpnt; | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	unsigned long   	startwait = jiffies; | 
 | 	int			retval    = 1; | 
 |         char		      * name      = tape_name(STp); | 
 |                                                                                                                                  | 
 | 	if (writing) { | 
 | 		char	mybuf[24]; | 
 | 		char  * olddata = STp->buffer->b_data; | 
 | 		int	oldsize = STp->buffer->buffer_size; | 
 |  | 
 | 		/* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */ | 
 |  | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = WRITE_FILEMARKS; | 
 | 		cmd[1] = 1; | 
 | 		SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, | 
 | 								MAX_RETRIES, 1); | 
 |  | 
 | 		while (retval && time_before (jiffies, startwait + 5*60*HZ)) { | 
 |  | 
 | 			if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) { | 
 |  | 
 | 				/* some failure - not just not-ready */ | 
 | 				retval = osst_write_error_recovery(STp, aSRpnt, 0); | 
 | 				break; | 
 | 			} | 
 | 			schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC); | 
 |  | 
 | 			STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; | 
 | 			memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 			cmd[0] = READ_POSITION; | 
 |  | 
 | 			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout, | 
 | 										MAX_RETRIES, 1); | 
 |  | 
 | 			retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 ); | 
 | 			STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; | 
 | 		} | 
 | 		if (retval) | 
 | 			printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name); | 
 | 	} else | 
 | 		/* TODO - figure out which error conditions can be handled */ | 
 | 		if (STp->buffer->syscall_result) | 
 | 			printk(KERN_WARNING | 
 | 				"%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name, | 
 | 					(*aSRpnt)->sense[ 2] & 0x0f, | 
 | 					(*aSRpnt)->sense[12], | 
 | 					(*aSRpnt)->sense[13]); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the next OnStream tape frame at the current location | 
 |  */ | 
 | static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	int			retval = 0; | 
 | #if DEBUG | 
 | 	os_aux_t	      * aux    = STp->buffer->aux; | 
 | 	char		      * name   = tape_name(STp); | 
 | #endif | 
 |  | 
 | 	if (STp->poll) | 
 | 		if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout)) | 
 | 			retval = osst_recover_wait_frame(STp, aSRpnt, 0); | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = READ_6; | 
 | 	cmd[1] = 1; | 
 | 	cmd[4] = 1; | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name); | 
 | #endif | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, | 
 | 				      STp->timeout, MAX_RETRIES, 1); | 
 | 	*aSRpnt = SRpnt; | 
 | 	if (!SRpnt) | 
 | 		return (-EBUSY); | 
 |  | 
 | 	if ((STp->buffer)->syscall_result) { | 
 | 	    retval = 1; | 
 | 	    if (STp->read_error_frame == 0) { | 
 | 		STp->read_error_frame = STp->first_frame_position; | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame); | 
 | #endif | 
 | 	    } | 
 | #if DEBUG | 
 | 	    if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", | 
 | 		   name, | 
 | 		   SRpnt->sense[0], SRpnt->sense[1], | 
 | 		   SRpnt->sense[2], SRpnt->sense[3], | 
 | 		   SRpnt->sense[4], SRpnt->sense[5], | 
 | 		   SRpnt->sense[6], SRpnt->sense[7]); | 
 | #endif | 
 | 	} | 
 | 	else | 
 | 	    STp->first_frame_position++; | 
 | #if DEBUG | 
 | 	if (debugging) { | 
 | 	   char sig[8]; int i; | 
 | 	   for (i=0;i<4;i++) | 
 | 		   sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i]; | 
 | 	   sig[4] = '\0'; | 
 | 	   printk(OSST_DEB_MSG  | 
 | 		"%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig, | 
 | 			ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr), | 
 | 			aux->frame_type==1?"EOD":aux->frame_type==2?"MARK": | 
 | 			aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL",  | 
 | 			ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), | 
 | 			ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) ); | 
 | 	   if (aux->frame_type==2) | 
 | 		printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name, | 
 | 			ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn)); | 
 | 	   printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval); | 
 | 	} | 
 | #endif | 
 | 	return (retval); | 
 | } | 
 |  | 
 | static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	struct st_partstat    * STps   = &(STp->ps[STp->partition]); | 
 | 	struct osst_request   * SRpnt  ; | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	int			retval = 0; | 
 | 	char		      * name   = tape_name(STp); | 
 |  | 
 | 	if (STps->rw != ST_READING) {         /* Initialize read operation */ | 
 | 		if (STps->rw == ST_WRITING || STp->dirty) { | 
 | 			STp->write_type = OS_WRITE_DATA; | 
 |                         osst_flush_write_buffer(STp, aSRpnt); | 
 | 			osst_flush_drive_buffer(STp, aSRpnt); | 
 | 		} | 
 | 		STps->rw = ST_READING; | 
 | 		STp->frame_in_buffer = 0; | 
 |  | 
 | 		/* | 
 | 		 *      Issue a read 0 command to get the OnStream drive | 
 |                  *      read frames into its buffer. | 
 | 		 */ | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = READ_6; | 
 | 		cmd[1] = 1; | 
 |  | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name); | 
 | #endif | 
 | 		SRpnt   = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 		*aSRpnt = SRpnt; | 
 | 		if ((retval = STp->buffer->syscall_result)) | 
 | 			printk(KERN_WARNING "%s:W: Error starting read ahead\n", name); | 
 | 	} | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 						int frame_seq_number, int quiet) | 
 | { | 
 | 	struct st_partstat * STps  = &(STp->ps[STp->partition]); | 
 | 	char		   * name  = tape_name(STp); | 
 | 	int		     cnt   = 0, | 
 | 			     bad   = 0, | 
 | 			     past  = 0, | 
 | 			     x, | 
 | 			     position; | 
 |  | 
 | 	/* | 
 | 	 * If we want just any frame (-1) and there is a frame in the buffer, return it | 
 | 	 */ | 
 | 	if (frame_seq_number == -1 && STp->frame_in_buffer) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number); | 
 | #endif | 
 | 		return (STps->eof); | 
 | 	} | 
 | 	/* | 
 |          * Search and wait for the next logical tape frame | 
 | 	 */ | 
 | 	while (1) { | 
 | 		if (cnt++ > 400) { | 
 |                         printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n", | 
 | 					    name, frame_seq_number); | 
 | 			if (STp->read_error_frame) { | 
 | 				osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0); | 
 | #if DEBUG | 
 |                         	printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n", | 
 | 						    name, STp->read_error_frame); | 
 | #endif | 
 | 				STp->read_error_frame = 0; | 
 | 				STp->abort_count++; | 
 | 			} | 
 | 			return (-EIO); | 
 | 		} | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n", | 
 | 					  name, frame_seq_number, cnt); | 
 | #endif | 
 | 		if ( osst_initiate_read(STp, aSRpnt) | 
 |                 || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) { | 
 | 			if (STp->raw) | 
 | 				return (-EIO); | 
 | 			position = osst_get_frame_position(STp, aSRpnt); | 
 | 			if (position >= 0xbae && position < 0xbb8) | 
 | 				position = 0xbb8; | 
 | 			else if (position > STp->eod_frame_ppos || ++bad == 10) { | 
 | 				position = STp->read_error_frame - 1; | 
 | 				bad = 0; | 
 | 			} | 
 | 			else { | 
 | 				position += 29; | 
 | 				cnt      += 19; | 
 | 			} | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n", | 
 | 					 name, position); | 
 | #endif | 
 | 			osst_set_frame_position(STp, aSRpnt, position, 0); | 
 | 			continue; | 
 | 		} | 
 | 		if (osst_verify_frame(STp, frame_seq_number, quiet)) | 
 | 			break; | 
 | 		if (osst_verify_frame(STp, -1, quiet)) { | 
 | 			x = ntohl(STp->buffer->aux->frame_seq_num); | 
 | 			if (STp->fast_open) { | 
 | 				printk(KERN_WARNING | 
 | 				       "%s:W: Found logical frame %d instead of %d after fast open\n", | 
 | 				       name, x, frame_seq_number); | 
 | 				STp->header_ok = 0; | 
 | 				STp->read_error_frame = 0; | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (x > frame_seq_number) { | 
 | 				if (++past > 3) { | 
 | 					/* positioning backwards did not bring us to the desired frame */ | 
 | 					position = STp->read_error_frame - 1; | 
 | 				} | 
 | 				else { | 
 | 			        	position = osst_get_frame_position(STp, aSRpnt) | 
 | 					         + frame_seq_number - x - 1; | 
 |  | 
 | 					if (STp->first_frame_position >= 3000 && position < 3000) | 
 | 						position -= 10; | 
 | 				} | 
 | #if DEBUG | 
 |                                 printk(OSST_DEB_MSG | 
 | 				       "%s:D: Found logical frame %d while looking for %d: back up %d\n", | 
 | 						name, x, frame_seq_number, | 
 | 					       	STp->first_frame_position - position); | 
 | #endif | 
 |                         	osst_set_frame_position(STp, aSRpnt, position, 0); | 
 | 				cnt += 10; | 
 | 			} | 
 | 			else | 
 | 				past = 0; | 
 | 		} | 
 | 		if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name); | 
 | #endif | 
 | 			osst_set_frame_position(STp, aSRpnt, 0xbb8, 0); | 
 | 			cnt--; | 
 | 		} | 
 | 		STp->frame_in_buffer = 0; | 
 | 	} | 
 | 	if (cnt > 1) { | 
 | 		STp->recover_count++; | 
 | 		STp->recover_erreg++; | 
 | 		printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n",  | 
 | 					name, STp->read_error_frame); | 
 |  	} | 
 | 	STp->read_count++; | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging || STps->eof) | 
 | 		printk(OSST_DEB_MSG | 
 | 			"%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n", | 
 | 			name, frame_seq_number, STp->frame_seq_number, STps->eof); | 
 | #endif | 
 | 	STp->fast_open = 0; | 
 | 	STp->read_error_frame = 0; | 
 | 	return (STps->eof); | 
 | } | 
 |  | 
 | static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num) | 
 | { | 
 |         struct st_partstat * STps = &(STp->ps[STp->partition]); | 
 | 	char		   * name = tape_name(STp); | 
 | 	int	retries    = 0; | 
 | 	int	frame_seq_estimate, ppos_estimate, move; | 
 | 	 | 
 | 	if (logical_blk_num < 0) logical_blk_num = 0; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n", | 
 | 				name, logical_blk_num, STp->logical_blk_num,  | 
 | 				STp->block_size<1024?STp->block_size:STp->block_size/1024, | 
 | 				STp->block_size<1024?'b':'k'); | 
 | #endif | 
 | 	/* Do we know where we are? */ | 
 | 	if (STps->drv_block >= 0) { | 
 | 		move                = logical_blk_num - STp->logical_blk_num; | 
 | 		if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; | 
 | 		move               /= (OS_DATA_SIZE / STp->block_size); | 
 | 		frame_seq_estimate  = STp->frame_seq_number + move; | 
 | 	} else | 
 | 		frame_seq_estimate  = logical_blk_num * STp->block_size / OS_DATA_SIZE; | 
 |  | 
 | 	if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10; | 
 | 	else			       ppos_estimate = frame_seq_estimate + 20; | 
 | 	while (++retries < 10) { | 
 | 	   if (ppos_estimate > STp->eod_frame_ppos-2) { | 
 | 	       frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate; | 
 | 	       ppos_estimate       = STp->eod_frame_ppos - 2; | 
 | 	   } | 
 | 	   if (frame_seq_estimate < 0) { | 
 | 	       frame_seq_estimate = 0; | 
 | 	       ppos_estimate      = 10; | 
 | 	   } | 
 | 	   osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0); | 
 | 	   if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) { | 
 | 	      /* we've located the estimated frame, now does it have our block? */ | 
 | 	      if (logical_blk_num <  STp->logical_blk_num || | 
 | 	          logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) { | 
 | 		 if (STps->eof == ST_FM_HIT) | 
 | 		    move = logical_blk_num < STp->logical_blk_num? -2 : 1; | 
 | 		 else { | 
 | 		    move                = logical_blk_num - STp->logical_blk_num; | 
 | 		    if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1; | 
 | 		    move               /= (OS_DATA_SIZE / STp->block_size); | 
 | 		 } | 
 | 		 if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1; | 
 | #if DEBUG | 
 | 		 printk(OSST_DEB_MSG | 
 | 			"%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n", | 
 | 				name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,  | 
 | 				STp->logical_blk_num, logical_blk_num, move); | 
 | #endif | 
 | 		 frame_seq_estimate += move; | 
 | 		 ppos_estimate      += move; | 
 | 		 continue; | 
 | 	      } else { | 
 | 		 STp->buffer->read_pointer  = (logical_blk_num - STp->logical_blk_num) * STp->block_size; | 
 | 		 STp->buffer->buffer_bytes -= STp->buffer->read_pointer; | 
 | 		 STp->logical_blk_num       =  logical_blk_num; | 
 | #if DEBUG | 
 | 		 printk(OSST_DEB_MSG  | 
 | 			"%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n", | 
 | 				name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer,  | 
 | 				STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size,  | 
 | 				STp->block_size); | 
 | #endif | 
 | 		 STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); | 
 | 		 if (STps->eof == ST_FM_HIT) { | 
 | 		     STps->drv_file++; | 
 | 		     STps->drv_block = 0; | 
 | 		 } else { | 
 | 		     STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? | 
 | 					  STp->logical_blk_num - | 
 | 					     (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): | 
 | 					-1; | 
 | 		 } | 
 | 		 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; | 
 | 		 return 0; | 
 | 	      } | 
 | 	   } | 
 | 	   if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0) | 
 | 	      goto error; | 
 | 	   /* we are not yet at the estimated frame, adjust our estimate of its physical position */ | 
 | #if DEBUG | 
 | 	   printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n",  | 
 | 			   name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,  | 
 | 			   STp->logical_blk_num, logical_blk_num); | 
 | #endif | 
 | 	   if (frame_seq_estimate != STp->frame_seq_number) | 
 | 	      ppos_estimate += frame_seq_estimate - STp->frame_seq_number; | 
 | 	   else | 
 | 	      break; | 
 | 	} | 
 | error: | 
 | 	printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n",  | 
 | 			    name, logical_blk_num, STp->logical_blk_num, retries); | 
 | 	return (-EIO); | 
 | } | 
 |  | 
 | /* The values below are based on the OnStream frame payload size of 32K == 2**15, | 
 |  * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block | 
 |  * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions | 
 |  * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1. | 
 |  */ | 
 | #define OSST_FRAME_SHIFT  6 | 
 | #define OSST_SECTOR_SHIFT 9 | 
 | #define OSST_SECTOR_MASK  0x03F | 
 |  | 
 | static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int	sector; | 
 | #if DEBUG | 
 | 	char  * name = tape_name(STp); | 
 | 	 | 
 | 	printk(OSST_DEB_MSG  | 
 | 		"%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n", | 
 | 		name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, | 
 | 		STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block,  | 
 | 		STp->ps[STp->partition].rw == ST_WRITING?'w':'r', | 
 | 		STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes: | 
 | 		STp->buffer->read_pointer, STp->ps[STp->partition].eof); | 
 | #endif | 
 | 	/* do we know where we are inside a file? */ | 
 | 	if (STp->ps[STp->partition].drv_block >= 0) { | 
 | 		sector = (STp->frame_in_buffer ? STp->first_frame_position-1 : | 
 | 				STp->first_frame_position) << OSST_FRAME_SHIFT; | 
 | 		if (STp->ps[STp->partition].rw == ST_WRITING) | 
 | 		       	sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; | 
 | 		else | 
 | 	       		sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK; | 
 | 	} else { | 
 | 		sector = osst_get_frame_position(STp, aSRpnt); | 
 | 		if (sector > 0) | 
 | 			sector <<= OSST_FRAME_SHIFT; | 
 | 	} | 
 | 	return sector; | 
 | } | 
 |  | 
 | static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector) | 
 | { | 
 |         struct st_partstat * STps   = &(STp->ps[STp->partition]); | 
 | 	int		     frame  = sector >> OSST_FRAME_SHIFT, | 
 | 			     offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT,  | 
 | 			     r; | 
 | #if DEBUG | 
 | 	char          * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n", | 
 | 				name, sector, frame, offset); | 
 | #endif | 
 | 	if (frame < 0 || frame >= STp->capacity) return (-ENXIO); | 
 |  | 
 | 	if (frame <= STp->first_data_ppos) { | 
 | 		STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0; | 
 | 		return (osst_set_frame_position(STp, aSRpnt, frame, 0)); | 
 | 	} | 
 | 	r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0); | 
 | 	if (r < 0) return r; | 
 |  | 
 | 	r = osst_get_logical_frame(STp, aSRpnt, -1, 1); | 
 | 	if (r < 0) return r; | 
 |  | 
 | 	if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO); | 
 |  | 
 | 	if (offset) { | 
 | 		STp->logical_blk_num      += offset / STp->block_size; | 
 | 		STp->buffer->read_pointer  = offset; | 
 | 		STp->buffer->buffer_bytes -= offset; | 
 | 	} else { | 
 | 		STp->frame_seq_number++; | 
 | 		STp->frame_in_buffer       = 0; | 
 | 		STp->logical_blk_num      += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); | 
 | 		STp->buffer->buffer_bytes  = STp->buffer->read_pointer = 0; | 
 | 	} | 
 | 	STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt); | 
 | 	if (STps->eof == ST_FM_HIT) { | 
 | 		STps->drv_file++; | 
 | 		STps->drv_block = 0; | 
 | 	} else { | 
 | 		STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)? | 
 | 				    STp->logical_blk_num - | 
 | 					(STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0): | 
 | 				  -1; | 
 | 	} | 
 | 	STps->eof       = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG  | 
 | 		"%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n", | 
 | 		name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num, | 
 | 		STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Read back the drive's internal buffer contents, as a part | 
 |  * of the write error recovery mechanism for old OnStream | 
 |  * firmware revisions. | 
 |  * Precondition for this function to work: all frames in the | 
 |  * drive's buffer must be of one type (DATA, MARK or EOD)! | 
 |  */ | 
 | static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 						unsigned int frame, unsigned int skip, int pending) | 
 | { | 
 | 	struct osst_request   * SRpnt = * aSRpnt; | 
 | 	unsigned char	      * buffer, * p; | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	int			flag, new_frame, i; | 
 | 	int			nframes          = STp->cur_frames; | 
 | 	int			blks_per_frame   = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); | 
 | 	int			frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num) | 
 | 						- (nframes + pending - 1); | 
 | 	int			logical_blk_num  = ntohl(STp->buffer->aux->logical_blk_num)  | 
 | 						- (nframes + pending - 1) * blks_per_frame; | 
 | 	char		      * name             = tape_name(STp); | 
 | 	unsigned long		startwait        = jiffies; | 
 | #if DEBUG | 
 | 	int			dbg              = debugging; | 
 | #endif | 
 |  | 
 | 	if ((buffer = vmalloc(array_size((nframes + 1), OS_DATA_SIZE))) == NULL) | 
 | 		return (-EIO); | 
 |  | 
 | 	printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n", | 
 | 			 name, nframes, pending?" and one that was pending":""); | 
 |  | 
 | 	osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE])); | 
 | #if DEBUG | 
 | 	if (pending && debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n", | 
 | 				name, frame_seq_number + nframes, | 
 | 			       	logical_blk_num + nframes * blks_per_frame, | 
 | 			       	p[0], p[1], p[2], p[3]); | 
 | #endif | 
 | 	for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) { | 
 |  | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = 0x3C;		/* Buffer Read           */ | 
 | 		cmd[1] = 6;		/* Retrieve Faulty Block */ | 
 | 		cmd[7] = 32768 >> 8; | 
 | 		cmd[8] = 32768 & 0xff; | 
 |  | 
 | 		SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE, | 
 | 					    STp->timeout, MAX_RETRIES, 1); | 
 | 	 | 
 | 		if ((STp->buffer)->syscall_result || !SRpnt) { | 
 | 			printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name); | 
 | 			vfree(buffer); | 
 | 			*aSRpnt = SRpnt; | 
 | 			return (-EIO); | 
 | 		} | 
 | 		osst_copy_from_buffer(STp->buffer, p); | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n", | 
 | 					  name, frame_seq_number + i, p[0], p[1], p[2], p[3]); | 
 | #endif | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 | 	osst_get_frame_position(STp, aSRpnt); | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames); | 
 | #endif | 
 | 	/* Write synchronously so we can be sure we're OK again and don't have to recover recursively */ | 
 | 	/* In the header we don't actually re-write the frames that fail, just the ones after them */ | 
 |  | 
 | 	for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) { | 
 |  | 
 | 		if (flag) { | 
 | 			if (STp->write_type == OS_WRITE_HEADER) { | 
 | 				i += skip; | 
 | 				p += skip * OS_DATA_SIZE; | 
 | 			} | 
 | 			else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990) | 
 | 				new_frame = 3000-i; | 
 | 			else | 
 | 				new_frame += skip; | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n", | 
 | 						name, new_frame+i, frame_seq_number+i); | 
 | #endif | 
 | 			osst_set_frame_position(STp, aSRpnt, new_frame + i, 0); | 
 | 			osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE); | 
 | 			osst_get_frame_position(STp, aSRpnt); | 
 | 			SRpnt = * aSRpnt; | 
 |  | 
 | 			if (new_frame > frame + 1000) { | 
 | 				printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name); | 
 | 				vfree(buffer); | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if ( i >= nframes + pending ) break; | 
 | 			flag = 0; | 
 | 		} | 
 | 		osst_copy_to_buffer(STp->buffer, p); | 
 | 		/* | 
 | 		 * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type! | 
 | 		 */ | 
 | 		osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i, | 
 | 			       	logical_blk_num + i*blks_per_frame, | 
 | 			       	ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame); | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = WRITE_6; | 
 | 		cmd[1] = 1; | 
 | 		cmd[4] = 1; | 
 |  | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG | 
 | 				"%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n", | 
 | 				name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame, | 
 | 				p[0], p[1], p[2], p[3]); | 
 | #endif | 
 | 		SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, | 
 | 					    STp->timeout, MAX_RETRIES, 1); | 
 |  | 
 | 		if (STp->buffer->syscall_result) | 
 | 			flag = 1; | 
 | 		else { | 
 | 			p += OS_DATA_SIZE; i++; | 
 |  | 
 | 			/* if we just sent the last frame, wait till all successfully written */ | 
 | 			if ( i == nframes + pending ) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name); | 
 | #endif | 
 | 				memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 				cmd[0] = WRITE_FILEMARKS; | 
 | 				cmd[1] = 1; | 
 | 				SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, | 
 | 							    STp->timeout, MAX_RETRIES, 1); | 
 | #if DEBUG | 
 | 				if (debugging) { | 
 | 					printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); | 
 | 					printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); | 
 | 					debugging = 0; | 
 | 				} | 
 | #endif | 
 | 				flag = STp->buffer->syscall_result; | 
 | 				while ( !flag && time_before(jiffies, startwait + 60*HZ) ) { | 
 |  | 
 | 					memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 					cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 					SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, | 
 | 												MAX_RETRIES, 1); | 
 |  | 
 | 					if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 && | 
 | 					    (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) { | 
 | 						/* in the process of becoming ready */ | 
 | 						msleep(100); | 
 | 						continue; | 
 | 					} | 
 | 					if (STp->buffer->syscall_result) | 
 | 						flag = 1; | 
 | 					break; | 
 | 				} | 
 | #if DEBUG | 
 | 				debugging = dbg; | 
 | 				printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); | 
 | #endif | 
 | 			} | 
 | 		} | 
 | 		*aSRpnt = SRpnt; | 
 | 		if (flag) { | 
 | 			if ((SRpnt->sense[ 2] & 0x0f) == 13 && | 
 | 			     SRpnt->sense[12]         ==  0 && | 
 | 			     SRpnt->sense[13]         ==  2) { | 
 | 				printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name); | 
 | 				vfree(buffer); | 
 | 				return (-EIO);			/* hit end of tape = fail */ | 
 | 			} | 
 | 			i = ((SRpnt->sense[3] << 24) | | 
 | 			     (SRpnt->sense[4] << 16) | | 
 | 			     (SRpnt->sense[5] <<  8) | | 
 | 			      SRpnt->sense[6]        ) - new_frame; | 
 | 			p = &buffer[i * OS_DATA_SIZE]; | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i); | 
 | #endif | 
 | 			osst_get_frame_position(STp, aSRpnt); | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n", | 
 | 					  name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames); | 
 | #endif | 
 | 		} | 
 | 	} | 
 | 	if (flag) { | 
 | 		/* error recovery did not successfully complete */ | 
 | 		printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name, | 
 | 				STp->write_type == OS_WRITE_HEADER?"header":"body"); | 
 | 	} | 
 | 	if (!pending) | 
 | 		osst_copy_to_buffer(STp->buffer, p);	/* so buffer content == at entry in all cases */ | 
 | 	vfree(buffer); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 					unsigned int frame, unsigned int skip, int pending) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	char		      * name      = tape_name(STp); | 
 | 	int			expected  = 0; | 
 | 	int			attempts  = 1000 / skip; | 
 | 	int			flag      = 1; | 
 | 	unsigned long		startwait = jiffies; | 
 | #if DEBUG | 
 | 	int			dbg       = debugging; | 
 | #endif | 
 |  | 
 | 	while (attempts && time_before(jiffies, startwait + 60*HZ)) { | 
 | 		if (flag) { | 
 | #if DEBUG | 
 | 			debugging = dbg; | 
 | #endif | 
 | 			if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990) | 
 | 				frame = 3000-skip; | 
 | 			expected = frame+skip+STp->cur_frames+pending; | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n", | 
 | 					  name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending); | 
 | #endif | 
 | 			osst_set_frame_position(STp, aSRpnt, frame + skip, 1); | 
 | 			flag = 0; | 
 | 			attempts--; | 
 | 			schedule_timeout_interruptible(msecs_to_jiffies(100)); | 
 | 		} | 
 | 		if (osst_get_frame_position(STp, aSRpnt) < 0) {		/* additional write error */ | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n", | 
 | 					  name, STp->first_frame_position, | 
 | 					  STp->last_frame_position, STp->cur_frames); | 
 | #endif | 
 | 			frame = STp->last_frame_position; | 
 | 			flag = 1; | 
 | 			continue; | 
 | 		} | 
 | 		if (pending && STp->cur_frames < 50) { | 
 |  | 
 | 			memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 			cmd[0] = WRITE_6; | 
 | 			cmd[1] = 1; | 
 | 			cmd[4] = 1; | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n", | 
 | 					  name, STp->frame_seq_number-1, STp->first_frame_position); | 
 | #endif | 
 | 			SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, | 
 | 						      STp->timeout, MAX_RETRIES, 1); | 
 | 			*aSRpnt = SRpnt; | 
 |  | 
 | 			if (STp->buffer->syscall_result) {		/* additional write error */ | 
 | 				if ((SRpnt->sense[ 2] & 0x0f) == 13 && | 
 | 				     SRpnt->sense[12]         ==  0 && | 
 | 				     SRpnt->sense[13]         ==  2) { | 
 | 					printk(KERN_ERR | 
 | 					       "%s:E: Volume overflow in write error recovery\n", | 
 | 					       name); | 
 | 					break;				/* hit end of tape = fail */ | 
 | 				} | 
 | 				flag = 1; | 
 | 			} | 
 | 			else | 
 | 				pending = 0; | 
 |  | 
 | 			continue; | 
 | 		} | 
 | 		if (STp->cur_frames == 0) { | 
 | #if DEBUG | 
 | 			debugging = dbg; | 
 | 			printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name); | 
 | #endif | 
 | 			if (STp->first_frame_position != expected) { | 
 | 				printk(KERN_ERR "%s:A: Actual position %d - expected %d\n",  | 
 | 						name, STp->first_frame_position, expected); | 
 | 				return (-EIO); | 
 | 			} | 
 | 			return 0; | 
 | 		} | 
 | #if DEBUG | 
 | 		if (debugging) { | 
 | 			printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name); | 
 | 			printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name); | 
 | 			debugging = 0; | 
 | 		} | 
 | #endif | 
 | 		schedule_timeout_interruptible(msecs_to_jiffies(100)); | 
 | 	} | 
 | 	printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name); | 
 | #if DEBUG | 
 | 	debugging = dbg; | 
 | #endif | 
 | 	return (-EIO); | 
 | } | 
 |  | 
 | /* | 
 |  * Error recovery algorithm for the OnStream tape. | 
 |  */ | 
 |  | 
 | static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending) | 
 | { | 
 | 	struct osst_request * SRpnt  = * aSRpnt; | 
 | 	struct st_partstat  * STps   = & STp->ps[STp->partition]; | 
 | 	char		    * name   = tape_name(STp); | 
 | 	int		      retval = 0; | 
 | 	int		      rw_state; | 
 | 	unsigned int	      frame, skip; | 
 |  | 
 | 	rw_state = STps->rw; | 
 |  | 
 | 	if ((SRpnt->sense[ 2] & 0x0f) != 3 | 
 | 	  || SRpnt->sense[12]         != 12 | 
 | 	  || SRpnt->sense[13]         != 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name, | 
 | 			SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]); | 
 | #endif | 
 | 		return (-EIO); | 
 | 	} | 
 | 	frame =	(SRpnt->sense[3] << 24) | | 
 | 		(SRpnt->sense[4] << 16) | | 
 | 		(SRpnt->sense[5] <<  8) | | 
 | 		 SRpnt->sense[6]; | 
 | 	skip  =  SRpnt->sense[9]; | 
 |   | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip); | 
 | #endif | 
 | 	osst_get_frame_position(STp, aSRpnt); | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n", | 
 | 			name, STp->first_frame_position, STp->last_frame_position); | 
 | #endif | 
 | 	switch (STp->write_type) { | 
 | 	   case OS_WRITE_DATA: | 
 | 	   case OS_WRITE_EOD: | 
 | 	   case OS_WRITE_NEW_MARK: | 
 | 		printk(KERN_WARNING  | 
 | 			"%s:I: Relocating %d buffered logical frames from position %u to %u\n", | 
 | 			name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip); | 
 | 		if (STp->os_fw_rev >= 10600) | 
 | 			retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending); | 
 | 		else | 
 | 			retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending); | 
 | 		printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name, | 
 | 			       	retval?"E"    :"I", | 
 | 			       	retval?""     :"Don't worry, ", | 
 | 			       	retval?" not ":" "); | 
 | 		break; | 
 | 	   case OS_WRITE_LAST_MARK: | 
 | 		printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name); | 
 | 		osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); | 
 | 		retval = -EIO; | 
 | 		break; | 
 | 	   case OS_WRITE_HEADER: | 
 | 		printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name); | 
 | 		retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending); | 
 | 		break; | 
 | 	   default: | 
 | 		printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name); | 
 | 		osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0); | 
 | 	} | 
 | 	osst_get_frame_position(STp, aSRpnt); | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n",  | 
 | 			name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position); | 
 | 	printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num); | 
 | #endif | 
 | 	if (retval == 0) { | 
 | 		STp->recover_count++; | 
 | 		STp->recover_erreg++; | 
 | 	} else | 
 | 		STp->abort_count++; | 
 |  | 
 | 	STps->rw = rw_state; | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 								 int mt_op, int mt_count) | 
 | { | 
 | 	char  * name = tape_name(STp); | 
 | 	int     cnt; | 
 | 	int     last_mark_ppos = -1; | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count); | 
 | #endif | 
 | 	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name); | 
 | #endif | 
 | 		return -EIO; | 
 | 	} | 
 | 	if (STp->linux_media_version >= 4) { | 
 | 		/* | 
 | 		 * direct lookup in header filemark list | 
 | 		 */ | 
 | 		cnt = ntohl(STp->buffer->aux->filemark_cnt); | 
 | 		if (STp->header_ok                         &&  | 
 | 		    STp->header_cache != NULL              && | 
 | 		    (cnt - mt_count)  >= 0                 && | 
 | 		    (cnt - mt_count)   < OS_FM_TAB_MAX     && | 
 | 		    (cnt - mt_count)   < STp->filemark_cnt && | 
 | 		    STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos) | 
 |  | 
 | 			last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]); | 
 | #if DEBUG | 
 | 		if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX) | 
 | 			printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, | 
 | 			       STp->header_cache == NULL?"lack of header cache":"count out of range"); | 
 | 		else | 
 | 			printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", | 
 | 				name, cnt, | 
 | 				((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || | 
 | 				 (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == | 
 | 					 STp->buffer->aux->last_mark_ppos))?"match":"error", | 
 | 			       mt_count, last_mark_ppos); | 
 | #endif | 
 | 		if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) { | 
 | 			osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); | 
 | 			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG  | 
 | 					"%s:D: Couldn't get logical blk num in space_filemarks\n", name); | 
 | #endif | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", | 
 | 						 name, last_mark_ppos); | 
 | 				return (-EIO); | 
 | 			} | 
 | 			goto found; | 
 | 		} | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name); | 
 | #endif | 
 | 	} | 
 | 	cnt = 0; | 
 | 	while (cnt != mt_count) { | 
 | 		last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos); | 
 | 		if (last_mark_ppos == -1) | 
 | 			return (-EIO); | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos); | 
 | #endif | 
 | 		osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos); | 
 | 		cnt++; | 
 | 		if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); | 
 | #endif | 
 | 			return (-EIO); | 
 | 		} | 
 | 		if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 			printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", | 
 | 					 name, last_mark_ppos); | 
 | 			return (-EIO); | 
 | 		} | 
 | 	} | 
 | found: | 
 | 	if (mt_op == MTBSFM) { | 
 | 		STp->frame_seq_number++; | 
 | 		STp->frame_in_buffer      = 0; | 
 | 		STp->buffer->buffer_bytes = 0; | 
 | 		STp->buffer->read_pointer = 0; | 
 | 		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * ADRL 1.1 compatible "slow" space filemarks fwd version | 
 |  * | 
 |  * Just scans for the filemark sequentially. | 
 |  */ | 
 | static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 								     int mt_op, int mt_count) | 
 | { | 
 | 	int	cnt = 0; | 
 | #if DEBUG | 
 | 	char  * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count); | 
 | #endif | 
 | 	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); | 
 | #endif | 
 | 		return (-EIO); | 
 | 	} | 
 | 	while (1) { | 
 | 		if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name); | 
 | #endif | 
 | 			return (-EIO); | 
 | 		} | 
 | 		if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) | 
 | 			cnt++; | 
 | 		if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); | 
 | #endif | 
 | 			if (STp->first_frame_position > STp->eod_frame_ppos+1) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n", | 
 | 					       	name, STp->eod_frame_ppos, STp->first_frame_position-1); | 
 | #endif | 
 | 				STp->eod_frame_ppos = STp->first_frame_position-1; | 
 | 			} | 
 | 			return (-EIO); | 
 | 		} | 
 | 		if (cnt == mt_count) | 
 | 			break; | 
 | 		STp->frame_in_buffer = 0; | 
 | 	} | 
 | 	if (mt_op == MTFSF) { | 
 | 		STp->frame_seq_number++; | 
 | 		STp->frame_in_buffer      = 0; | 
 | 		STp->buffer->buffer_bytes = 0; | 
 | 		STp->buffer->read_pointer = 0; | 
 | 		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Fast linux specific version of OnStream FSF | 
 |  */ | 
 | static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 								     int mt_op, int mt_count) | 
 | { | 
 | 	char  * name = tape_name(STp); | 
 | 	int	cnt  = 0, | 
 | 		next_mark_ppos = -1; | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count); | 
 | #endif | 
 | 	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name); | 
 | #endif | 
 | 		return (-EIO); | 
 | 	} | 
 |  | 
 | 	if (STp->linux_media_version >= 4) { | 
 | 		/* | 
 | 		 * direct lookup in header filemark list | 
 | 		 */ | 
 | 		cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1; | 
 | 		if (STp->header_ok                         &&  | 
 | 		    STp->header_cache != NULL              && | 
 | 		    (cnt + mt_count)   < OS_FM_TAB_MAX     && | 
 | 		    (cnt + mt_count)   < STp->filemark_cnt && | 
 | 		    ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || | 
 | 		     (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos))) | 
 |  | 
 | 			next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]); | 
 | #if DEBUG | 
 | 		if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX) | 
 | 			printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name, | 
 | 			       STp->header_cache == NULL?"lack of header cache":"count out of range"); | 
 | 		else | 
 | 			printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n", | 
 | 			       name, cnt, | 
 | 			       ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) || | 
 | 				(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == | 
 | 					 STp->buffer->aux->last_mark_ppos))?"match":"error", | 
 | 			       mt_count, next_mark_ppos); | 
 | #endif | 
 | 		if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); | 
 | #endif | 
 | 			return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); | 
 | 		} else { | 
 | 			osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); | 
 | 			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", | 
 | 						 name); | 
 | #endif | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", | 
 | 						 name, next_mark_ppos); | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) { | 
 | 				printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n", | 
 | 						 name, cnt+mt_count, next_mark_ppos, | 
 | 						 ntohl(STp->buffer->aux->filemark_cnt)); | 
 |        				return (-EIO); | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		/* | 
 | 		 * Find nearest (usually previous) marker, then jump from marker to marker | 
 | 		 */ | 
 | 		while (1) { | 
 | 			if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER) | 
 | 				break; | 
 | 			if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name); | 
 | #endif | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (ntohl(STp->buffer->aux->filemark_cnt) == 0) { | 
 | 				if (STp->first_mark_ppos == -1) { | 
 | #if DEBUG | 
 | 					printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); | 
 | #endif | 
 | 					return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count); | 
 | 				} | 
 | 				osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos); | 
 | 				if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 					printk(OSST_DEB_MSG | 
 | 					       "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n", | 
 | 					       name); | 
 | #endif | 
 | 					return (-EIO); | 
 | 				} | 
 | 				if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 					printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n", | 
 | 							 name, STp->first_mark_ppos); | 
 | 					return (-EIO); | 
 | 				} | 
 | 			} else { | 
 | 				if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0) | 
 | 					return (-EIO); | 
 | 				mt_count++; | 
 | 			} | 
 | 		} | 
 | 		cnt++; | 
 | 		while (cnt != mt_count) { | 
 | 			next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos); | 
 | 			if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name); | 
 | #endif | 
 | 				return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt); | 
 | 			} | 
 | #if DEBUG | 
 | 			else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos); | 
 | #endif | 
 | 			osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos); | 
 | 			cnt++; | 
 | 			if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", | 
 | 						 name); | 
 | #endif | 
 | 				return (-EIO); | 
 | 			} | 
 | 			if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) { | 
 | 				printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n", | 
 | 						 name, next_mark_ppos); | 
 | 				return (-EIO); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	if (mt_op == MTFSF) { | 
 | 		STp->frame_seq_number++; | 
 | 		STp->frame_in_buffer      = 0; | 
 | 		STp->buffer->buffer_bytes = 0; | 
 | 		STp->buffer->read_pointer = 0; | 
 | 		STp->logical_blk_num     += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * In debug mode, we want to see as many errors as possible | 
 |  * to test the error recovery mechanism. | 
 |  */ | 
 | #if DEBUG | 
 | static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt  = * aSRpnt; | 
 | 	char		      * name   = tape_name(STp); | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SELECT; | 
 | 	cmd[1] = 0x10; | 
 | 	cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	(STp->buffer)->b_data[0] = cmd[4] - 1; | 
 | 	(STp->buffer)->b_data[1] = 0;			/* Medium Type - ignoring */ | 
 | 	(STp->buffer)->b_data[2] = 0;			/* Reserved */ | 
 | 	(STp->buffer)->b_data[3] = 0;			/* Block Descriptor Length */ | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7); | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries; | 
 |  | 
 | 	if (debugging) | 
 | 	    printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries); | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if ((STp->buffer)->syscall_result) | 
 | 	    printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries); | 
 | } | 
 | #endif | 
 |  | 
 |  | 
 | static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int	result; | 
 | 	int	this_mark_ppos = STp->first_frame_position; | 
 | 	int	this_mark_lbn  = STp->logical_blk_num; | 
 | #if DEBUG | 
 | 	char  * name = tape_name(STp); | 
 | #endif | 
 |  | 
 | 	if (STp->raw) return 0; | 
 |  | 
 | 	STp->write_type = OS_WRITE_NEW_MARK; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n",  | 
 | 	       name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn); | 
 | #endif | 
 | 	STp->dirty = 1; | 
 | 	result  = osst_flush_write_buffer(STp, aSRpnt); | 
 | 	result |= osst_flush_drive_buffer(STp, aSRpnt); | 
 | 	STp->last_mark_ppos = this_mark_ppos; | 
 | 	STp->last_mark_lbn  = this_mark_lbn; | 
 | 	if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX) | 
 | 		STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos); | 
 | 	if (STp->filemark_cnt++ == 0) | 
 | 		STp->first_mark_ppos = this_mark_ppos; | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int	result; | 
 | #if DEBUG | 
 | 	char  * name = tape_name(STp); | 
 | #endif | 
 |  | 
 | 	if (STp->raw) return 0; | 
 |  | 
 | 	STp->write_type = OS_WRITE_EOD; | 
 | 	STp->eod_frame_ppos = STp->first_frame_position; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name, | 
 | 			STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num); | 
 | #endif | 
 | 	STp->dirty = 1; | 
 |  | 
 | 	result  = osst_flush_write_buffer(STp, aSRpnt);	 | 
 | 	result |= osst_flush_drive_buffer(STp, aSRpnt); | 
 | 	STp->eod_frame_lfa = --(STp->frame_seq_number); | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) | 
 | { | 
 | 	char * name = tape_name(STp); | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where); | 
 | #endif | 
 | 	osst_wait_ready(STp, aSRpnt, 60 * 5, 0); | 
 | 	osst_set_frame_position(STp, aSRpnt, where, 0); | 
 | 	STp->write_type = OS_WRITE_FILLER; | 
 | 	while (count--) { | 
 | 		memcpy(STp->buffer->b_data, "Filler", 6); | 
 | 		STp->buffer->buffer_bytes = 6; | 
 | 		STp->dirty = 1; | 
 | 		if (osst_flush_write_buffer(STp, aSRpnt)) { | 
 | 			printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name); | 
 | 			return (-EIO); | 
 | 		} | 
 | 	} | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name); | 
 | #endif | 
 | 	return osst_flush_drive_buffer(STp, aSRpnt); | 
 | } | 
 |  | 
 | static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count) | 
 | { | 
 | 	char * name = tape_name(STp); | 
 | 	int     result; | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where); | 
 | #endif | 
 | 	osst_wait_ready(STp, aSRpnt, 60 * 5, 0); | 
 | 	osst_set_frame_position(STp, aSRpnt, where, 0); | 
 | 	STp->write_type = OS_WRITE_HEADER; | 
 | 	while (count--) { | 
 | 		osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache); | 
 | 		STp->buffer->buffer_bytes = sizeof(os_header_t); | 
 | 		STp->dirty = 1; | 
 | 		if (osst_flush_write_buffer(STp, aSRpnt)) { | 
 | 			printk(KERN_INFO "%s:I: Couldn't write header frame\n", name); | 
 | 			return (-EIO); | 
 | 		} | 
 | 	} | 
 | 	result = osst_flush_drive_buffer(STp, aSRpnt); | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done"); | 
 | #endif | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod) | 
 | { | 
 | 	os_header_t * header; | 
 | 	int	      result; | 
 | 	char        * name = tape_name(STp); | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name); | 
 | #endif | 
 | 	if (STp->raw) return 0; | 
 |  | 
 | 	if (STp->header_cache == NULL) { | 
 | 		if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { | 
 | 			printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); | 
 | 			return (-ENOMEM); | 
 | 		} | 
 | 		memset(STp->header_cache, 0, sizeof(os_header_t)); | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name); | 
 | #endif | 
 | 	} | 
 | 	if (STp->header_ok) STp->update_frame_cntr++; | 
 | 	else                STp->update_frame_cntr = 0; | 
 |  | 
 | 	header = STp->header_cache; | 
 | 	strcpy(header->ident_str, "ADR_SEQ"); | 
 | 	header->major_rev      = 1; | 
 | 	header->minor_rev      = 4; | 
 | 	header->ext_trk_tb_off = htons(17192); | 
 | 	header->pt_par_num     = 1; | 
 | 	header->partition[0].partition_num              = OS_DATA_PARTITION; | 
 | 	header->partition[0].par_desc_ver               = OS_PARTITION_VERSION; | 
 | 	header->partition[0].wrt_pass_cntr              = htons(STp->wrt_pass_cntr); | 
 | 	header->partition[0].first_frame_ppos           = htonl(STp->first_data_ppos); | 
 | 	header->partition[0].last_frame_ppos            = htonl(STp->capacity); | 
 | 	header->partition[0].eod_frame_ppos             = htonl(STp->eod_frame_ppos); | 
 | 	header->cfg_col_width                           = htonl(20); | 
 | 	header->dat_col_width                           = htonl(1500); | 
 | 	header->qfa_col_width                           = htonl(0); | 
 | 	header->ext_track_tb.nr_stream_part             = 1; | 
 | 	header->ext_track_tb.et_ent_sz                  = 32; | 
 | 	header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0; | 
 | 	header->ext_track_tb.dat_ext_trk_ey.fmt         = 1; | 
 | 	header->ext_track_tb.dat_ext_trk_ey.fm_tab_off  = htons(17736); | 
 | 	header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0; | 
 | 	header->ext_track_tb.dat_ext_trk_ey.last_hlb    = htonl(STp->eod_frame_lfa); | 
 | 	header->ext_track_tb.dat_ext_trk_ey.last_pp	= htonl(STp->eod_frame_ppos); | 
 | 	header->dat_fm_tab.fm_part_num                  = 0; | 
 | 	header->dat_fm_tab.fm_tab_ent_sz                = 4; | 
 | 	header->dat_fm_tab.fm_tab_ent_cnt               = htons(STp->filemark_cnt<OS_FM_TAB_MAX? | 
 | 								STp->filemark_cnt:OS_FM_TAB_MAX); | 
 |  | 
 | 	result  = __osst_write_header(STp, aSRpnt, 0xbae, 5); | 
 | 	if (STp->update_frame_cntr == 0) | 
 | 		    osst_write_filler(STp, aSRpnt, 0xbb3, 5); | 
 | 	result &= __osst_write_header(STp, aSRpnt,     5, 5); | 
 |  | 
 | 	if (locate_eod) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos); | 
 | #endif | 
 | 		osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0); | 
 | 	} | 
 | 	if (result) | 
 | 		printk(KERN_ERR "%s:E: Write header failed\n", name); | 
 | 	else { | 
 | 		memcpy(STp->application_sig, "LIN4", 4); | 
 | 		STp->linux_media         = 1; | 
 | 		STp->linux_media_version = 4; | 
 | 		STp->header_ok           = 1; | 
 | 	} | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	if (STp->header_cache != NULL) | 
 | 		memset(STp->header_cache, 0, sizeof(os_header_t)); | 
 |  | 
 | 	STp->logical_blk_num = STp->frame_seq_number = 0; | 
 | 	STp->frame_in_buffer = 0; | 
 | 	STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A; | 
 | 	STp->filemark_cnt = 0; | 
 | 	STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; | 
 | 	return osst_write_header(STp, aSRpnt, 1); | 
 | } | 
 |  | 
 | static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos) | 
 | { | 
 | 	char        * name = tape_name(STp); | 
 | 	os_header_t * header; | 
 | 	os_aux_t    * aux; | 
 | 	char          id_string[8]; | 
 | 	int	      linux_media_version, | 
 | 		      update_frame_cntr; | 
 |  | 
 | 	if (STp->raw) | 
 | 		return 1; | 
 |  | 
 | 	if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) { | 
 | 		if (osst_set_frame_position(STp, aSRpnt, ppos, 0)) | 
 | 			printk(KERN_WARNING "%s:W: Couldn't position tape\n", name); | 
 | 		osst_wait_ready(STp, aSRpnt, 60 * 15, 0); | 
 | 		if (osst_initiate_read (STp, aSRpnt)) { | 
 | 			printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | 	if (osst_read_frame(STp, aSRpnt, 180)) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	header = (os_header_t *) STp->buffer->b_data;	/* warning: only first segment addressable */ | 
 | 	aux = STp->buffer->aux; | 
 | 	if (aux->frame_type != OS_FRAME_TYPE_HEADER) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	if (ntohl(aux->frame_seq_num)              != 0                   || | 
 | 	    ntohl(aux->logical_blk_num)            != 0                   || | 
 | 	          aux->partition.partition_num     != OS_CONFIG_PARTITION || | 
 | 	    ntohl(aux->partition.first_frame_ppos) != 0                   || | 
 | 	    ntohl(aux->partition.last_frame_ppos)  != 0xbb7               ) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name, | 
 | 				ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num), | 
 | 			       	aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos), | 
 | 			       	ntohl(aux->partition.last_frame_ppos)); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 && | 
 | 	    strncmp(header->ident_str, "ADR-SEQ", 7) != 0) { | 
 | 		strlcpy(id_string, header->ident_str, 8); | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	update_frame_cntr = ntohl(aux->update_frame_cntr); | 
 | 	if (update_frame_cntr < STp->update_frame_cntr) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n", | 
 | 				   name, ppos, update_frame_cntr, STp->update_frame_cntr); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	if (header->major_rev != 1 || header->minor_rev != 4 ) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n",  | 
 | 				 name, (header->major_rev != 1 || header->minor_rev < 2 ||  | 
 | 				       header->minor_rev  > 4 )? "Invalid" : "Warning:", | 
 | 				 header->major_rev, header->minor_rev); | 
 | #endif | 
 | 		if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4) | 
 | 			return 0; | 
 | 	} | 
 | #if DEBUG | 
 | 	if (header->pt_par_num != 1) | 
 | 		printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n",  | 
 | 				 name, header->pt_par_num); | 
 | #endif | 
 | 	memcpy(id_string, aux->application_sig, 4); | 
 | 	id_string[4] = 0; | 
 | 	if (memcmp(id_string, "LIN", 3) == 0) { | 
 | 		STp->linux_media = 1; | 
 | 		linux_media_version = id_string[3] - '0'; | 
 | 		if (linux_media_version != 4) | 
 | 			printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n", | 
 | 					 name, linux_media_version); | 
 | 	} else { | 
 | 		printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string); | 
 | 		return 0; | 
 | 	} | 
 | 	if (linux_media_version < STp->linux_media_version) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n", | 
 | 				  name, ppos, linux_media_version); | 
 | #endif | 
 | 		return 0; | 
 | 	} | 
 | 	if (linux_media_version > STp->linux_media_version) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n", | 
 | 				   name, ppos, linux_media_version); | 
 | #endif | 
 | 		memcpy(STp->application_sig, id_string, 5); | 
 | 		STp->linux_media_version = linux_media_version; | 
 | 		STp->update_frame_cntr = -1; | 
 | 	} | 
 | 	if (update_frame_cntr > STp->update_frame_cntr) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n", | 
 | 				   name, ppos, update_frame_cntr); | 
 | #endif | 
 | 		if (STp->header_cache == NULL) { | 
 | 			if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { | 
 | 				printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); | 
 | 				return 0; | 
 | 			} | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name); | 
 | #endif | 
 | 		} | 
 | 		osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache); | 
 | 		header = STp->header_cache;	/* further accesses from cached (full) copy */ | 
 |  | 
 | 		STp->wrt_pass_cntr     = ntohs(header->partition[0].wrt_pass_cntr); | 
 | 		STp->first_data_ppos   = ntohl(header->partition[0].first_frame_ppos); | 
 | 		STp->eod_frame_ppos    = ntohl(header->partition[0].eod_frame_ppos); | 
 | 		STp->eod_frame_lfa     = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb); | 
 | 		STp->filemark_cnt      = ntohl(aux->filemark_cnt); | 
 | 		STp->first_mark_ppos   = ntohl(aux->next_mark_ppos); | 
 | 		STp->last_mark_ppos    = ntohl(aux->last_mark_ppos); | 
 | 		STp->last_mark_lbn     = ntohl(aux->last_mark_lbn); | 
 | 		STp->update_frame_cntr = update_frame_cntr; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n", | 
 | 			  name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt); | 
 | 	printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name, | 
 | 			  STp->first_data_ppos, | 
 | 			  ntohl(header->partition[0].last_frame_ppos), | 
 | 			  ntohl(header->partition[0].eod_frame_ppos)); | 
 | 	printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n",  | 
 | 			  name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos); | 
 | #endif | 
 | 		if (header->minor_rev < 4 && STp->linux_media_version == 4) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name); | 
 | #endif | 
 | 			memcpy((void *)header->dat_fm_tab.fm_tab_ent,  | 
 | 			       (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent)); | 
 | 			memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list)); | 
 | 		} | 
 | 		if (header->minor_rev == 4   && | 
 | 		    (header->ext_trk_tb_off                          != htons(17192)               || | 
 | 		     header->partition[0].partition_num              != OS_DATA_PARTITION          || | 
 | 		     header->partition[0].par_desc_ver               != OS_PARTITION_VERSION       || | 
 | 		     header->partition[0].last_frame_ppos            != htonl(STp->capacity)       || | 
 | 		     header->cfg_col_width                           != htonl(20)                  || | 
 | 		     header->dat_col_width                           != htonl(1500)                || | 
 | 		     header->qfa_col_width                           != htonl(0)                   || | 
 | 		     header->ext_track_tb.nr_stream_part             != 1                          || | 
 | 		     header->ext_track_tb.et_ent_sz                  != 32                         || | 
 | 		     header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION          || | 
 | 		     header->ext_track_tb.dat_ext_trk_ey.fmt         != 1                          || | 
 | 		     header->ext_track_tb.dat_ext_trk_ey.fm_tab_off  != htons(17736)               || | 
 | 		     header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0                          || | 
 | 		     header->ext_track_tb.dat_ext_trk_ey.last_pp     != htonl(STp->eod_frame_ppos) || | 
 | 		     header->dat_fm_tab.fm_part_num                  != OS_DATA_PARTITION          || | 
 | 		     header->dat_fm_tab.fm_tab_ent_sz                != 4                          || | 
 | 		     header->dat_fm_tab.fm_tab_ent_cnt               != | 
 | 			     htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX))) | 
 | 			printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name); | 
 |  | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int	position, ppos; | 
 | 	int	first, last; | 
 | 	int	valid = 0; | 
 | 	char  * name  = tape_name(STp); | 
 |  | 
 | 	position = osst_get_frame_position(STp, aSRpnt); | 
 |  | 
 | 	if (STp->raw) { | 
 | 		STp->header_ok = STp->linux_media = 1; | 
 | 		STp->linux_media_version = 0; | 
 | 		return 1; | 
 | 	} | 
 | 	STp->header_ok = STp->linux_media = STp->linux_media_version = 0; | 
 | 	STp->wrt_pass_cntr = STp->update_frame_cntr = -1; | 
 | 	STp->eod_frame_ppos = STp->first_data_ppos = -1; | 
 | 	STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1; | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reading header\n", name); | 
 | #endif | 
 |  | 
 | 	/* optimization for speed - if we are positioned at ppos 10, read second group first  */	 | 
 | 	/* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */ | 
 |  | 
 | 	first = position==10?0xbae: 5; | 
 | 	last  = position==10?0xbb3:10; | 
 |  | 
 | 	for (ppos = first; ppos < last; ppos++) | 
 | 		if (__osst_analyze_headers(STp, aSRpnt, ppos)) | 
 | 			valid = 1; | 
 |  | 
 | 	first = position==10? 5:0xbae; | 
 | 	last  = position==10?10:0xbb3; | 
 |  | 
 | 	for (ppos = first; ppos < last; ppos++) | 
 | 		if (__osst_analyze_headers(STp, aSRpnt, ppos)) | 
 | 			valid = 1; | 
 |  | 
 | 	if (!valid) { | 
 | 		printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name); | 
 | 		STp->eod_frame_ppos = STp->first_data_ppos = 0; | 
 | 		osst_set_frame_position(STp, aSRpnt, 10, 0); | 
 | 		return 0; | 
 | 	} | 
 | 	if (position <= STp->first_data_ppos) { | 
 | 		position = STp->first_data_ppos; | 
 | 		STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; | 
 | 	} | 
 | 	osst_set_frame_position(STp, aSRpnt, position, 0); | 
 | 	STp->header_ok = 1; | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int	frame_position  = STp->first_frame_position; | 
 | 	int	frame_seq_numbr = STp->frame_seq_number; | 
 | 	int	logical_blk_num = STp->logical_blk_num; | 
 |        	int	halfway_frame   = STp->frame_in_buffer; | 
 | 	int	read_pointer    = STp->buffer->read_pointer; | 
 | 	int	prev_mark_ppos  = -1; | 
 | 	int	actual_mark_ppos, i, n; | 
 | #if DEBUG | 
 | 	char  * name = tape_name(STp); | 
 |  | 
 | 	printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name); | 
 | #endif | 
 | 	osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); | 
 | 	if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name); | 
 | #endif | 
 | 		return (-EIO); | 
 | 	} | 
 | 	if (STp->linux_media_version >= 4) { | 
 | 		for (i=0; i<STp->filemark_cnt; i++) | 
 | 			if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position) | 
 | 				prev_mark_ppos = n; | 
 | 	} else | 
 | 		prev_mark_ppos = frame_position - 1;  /* usually - we don't really know */ | 
 | 	actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ? | 
 | 				frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos); | 
 | 	if (frame_position  != STp->first_frame_position                   || | 
 | 	    frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) || | 
 | 	    prev_mark_ppos  != actual_mark_ppos                            ) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name, | 
 | 				  STp->first_frame_position, frame_position,  | 
 | 				  STp->frame_seq_number + (halfway_frame?0:1), | 
 | 				  frame_seq_numbr, actual_mark_ppos, prev_mark_ppos); | 
 | #endif | 
 | 		return (-EIO); | 
 | 	} | 
 | 	if (halfway_frame) { | 
 | 		/* prepare buffer for append and rewrite on top of original */ | 
 | 		osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0); | 
 | 		STp->buffer->buffer_bytes  = read_pointer; | 
 | 		STp->ps[STp->partition].rw = ST_WRITING; | 
 | 		STp->dirty                 = 1; | 
 | 	} | 
 | 	STp->frame_in_buffer  = halfway_frame; | 
 | 	STp->frame_seq_number = frame_seq_numbr; | 
 | 	STp->logical_blk_num  = logical_blk_num; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Acc. to OnStream, the vers. numbering is the following: | 
 |  * X.XX for released versions (X=digit),  | 
 |  * XXXY for unreleased versions (Y=letter) | 
 |  * Ordering 1.05 < 106A < 106B < ...  < 106a < ... < 1.06 | 
 |  * This fn makes monoton numbers out of this scheme ... | 
 |  */ | 
 | static unsigned int osst_parse_firmware_rev (const char * str) | 
 | { | 
 | 	if (str[1] == '.') { | 
 | 		return (str[0]-'0')*10000 | 
 | 			+(str[2]-'0')*1000 | 
 | 			+(str[3]-'0')*100; | 
 | 	} else { | 
 | 		return (str[0]-'0')*10000 | 
 | 			+(str[1]-'0')*1000 | 
 | 			+(str[2]-'0')*100 - 100 | 
 | 			+(str[3]-'@'); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Configure the OnStream SCII tape drive for default operation | 
 |  */ | 
 | static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	unsigned char                  cmd[MAX_COMMAND_SIZE]; | 
 | 	char                         * name = tape_name(STp); | 
 | 	struct osst_request          * SRpnt = * aSRpnt; | 
 | 	osst_mode_parameter_header_t * header; | 
 | 	osst_block_size_page_t       * bs; | 
 | 	osst_capabilities_page_t     * cp; | 
 | 	osst_tape_paramtr_page_t     * prm; | 
 | 	int                            drive_buffer_size; | 
 |  | 
 | 	if (STp->ready != ST_READY) { | 
 | #if DEBUG | 
 | 	    printk(OSST_DEB_MSG "%s:D: Not Ready\n", name); | 
 | #endif | 
 | 	    return (-EIO); | 
 | 	} | 
 | 	 | 
 | 	if (STp->os_fw_rev < 10600) { | 
 | 	    printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev); | 
 | 	    printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Configure 32.5KB (data+aux) frame size. | 
 |          * Get the current frame size from the block size mode page | 
 | 	 */ | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SENSE; | 
 | 	cmd[1] = 8; | 
 | 	cmd[2] = BLOCK_SIZE_PAGE; | 
 | 	cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); | 
 | 	if (SRpnt == NULL) { | 
 | #if DEBUG | 
 |  	    printk(OSST_DEB_MSG "osst :D: Busy\n"); | 
 | #endif | 
 | 	    return (-EBUSY); | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 	    printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name); | 
 | 	    return (-EIO); | 
 | 	} | 
 |  | 
 | 	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; | 
 | 	bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl); | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n",   name, bs->play32     ? "Yes" : "No"); | 
 | 	printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5   ? "Yes" : "No"); | 
 | 	printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n",      name, bs->record32   ? "Yes" : "No"); | 
 | 	printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n",    name, bs->record32_5 ? "Yes" : "No"); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Configure default auto columns mode, 32.5KB transfer mode | 
 | 	 */  | 
 | 	bs->one = 1; | 
 | 	bs->play32 = 0; | 
 | 	bs->play32_5 = 1; | 
 | 	bs->record32 = 0; | 
 | 	bs->record32_5 = 1; | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SELECT; | 
 | 	cmd[1] = 0x10; | 
 | 	cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); | 
 | 	*aSRpnt = SRpnt; | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 	    printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name); | 
 | 	    return (-EIO); | 
 | 	} | 
 |  | 
 | #if DEBUG | 
 | 	printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name); | 
 | 	 /* | 
 | 	 * In debug mode, we want to see as many errors as possible | 
 | 	 * to test the error recovery mechanism. | 
 | 	 */ | 
 | 	osst_set_retries(STp, aSRpnt, 0); | 
 | 	SRpnt = * aSRpnt; | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Set vendor name to 'LIN4' for "Linux support version 4". | 
 | 	 */ | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SELECT; | 
 | 	cmd[1] = 0x10; | 
 | 	cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1; | 
 | 	header->medium_type      = 0;	/* Medium Type - ignoring */ | 
 | 	header->dsp              = 0;	/* Reserved */ | 
 | 	header->bdl              = 0;	/* Block Descriptor Length */ | 
 | 	 | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7); | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L'; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I'; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N'; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4'; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0; | 
 | 	(STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0; | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 	    printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name,  | 
 | 			(char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2)); | 
 | 	    return (-EIO); | 
 | 	} | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SENSE; | 
 | 	cmd[1] = 8; | 
 | 	cmd[2] = CAPABILITIES_PAGE; | 
 | 	cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 	    printk (KERN_ERR "%s:E: Can't get capabilities page\n", name); | 
 | 	    return (-EIO); | 
 | 	} | 
 |  | 
 | 	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; | 
 | 	cp     = (osst_capabilities_page_t    *) ((STp->buffer)->b_data + | 
 | 		 sizeof(osst_mode_parameter_header_t) + header->bdl); | 
 |  | 
 | 	drive_buffer_size = ntohs(cp->buffer_size) / 2; | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = MODE_SENSE; | 
 | 	cmd[1] = 8; | 
 | 	cmd[2] = TAPE_PARAMTR_PAGE; | 
 | 	cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 	    printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name); | 
 | 	    return (-EIO); | 
 | 	} | 
 |  | 
 | 	header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data; | 
 | 	prm    = (osst_tape_paramtr_page_t    *) ((STp->buffer)->b_data + | 
 | 		 sizeof(osst_mode_parameter_header_t) + header->bdl); | 
 |  | 
 | 	STp->density  = prm->density; | 
 | 	STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks); | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n", | 
 | 			  name, STp->density, STp->capacity / 32, drive_buffer_size); | 
 | #endif | 
 |  | 
 | 	return 0; | 
 | 	 | 
 | } | 
 |  | 
 |  | 
 | /* Step over EOF if it has been inadvertently crossed (ioctl not used because | 
 |    it messes up the block number). */ | 
 | static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward) | 
 | { | 
 | 	int	result; | 
 | 	char  * name = tape_name(STp); | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n", | 
 | 	   			  name, forward ? "forward" : "backward"); | 
 | #endif | 
 |  | 
 | 	if (forward) { | 
 | 	   /* assumes that the filemark is already read by the drive, so this is low cost */ | 
 | 	   result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1); | 
 | 	} | 
 | 	else | 
 | 	   /* assumes this is only called if we just read the filemark! */ | 
 | 	   result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1); | 
 |  | 
 | 	if (result < 0) | 
 | 	   printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n", | 
 | 				name, forward ? "forward" : "backward"); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 |  | 
 | /* Get the tape position. */ | 
 |  | 
 | static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	unsigned char		scmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	int			result = 0; | 
 | 	char    	      * name   = tape_name(STp); | 
 |  | 
 | 	/* KG: We want to be able to use it for checking Write Buffer availability | 
 | 	 *  and thus don't want to risk to overwrite anything. Exchange buffers ... */ | 
 | 	char		mybuf[24]; | 
 | 	char	      * olddata = STp->buffer->b_data; | 
 | 	int		oldsize = STp->buffer->buffer_size; | 
 |  | 
 | 	if (STp->ready != ST_READY) return (-EIO); | 
 |  | 
 | 	memset (scmd, 0, MAX_COMMAND_SIZE); | 
 | 	scmd[0] = READ_POSITION; | 
 |  | 
 | 	STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE, | 
 | 				      STp->timeout, MAX_RETRIES, 1); | 
 | 	if (!SRpnt) { | 
 | 		STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; | 
 | 		return (-EBUSY); | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if (STp->buffer->syscall_result) | 
 | 		result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL;	/* 3: Write Error */ | 
 |  | 
 | 	if (result == -EINVAL) | 
 | 		printk(KERN_ERR "%s:E: Can't read tape position.\n", name); | 
 | 	else { | 
 | 		if (result == -EIO) {	/* re-read position - this needs to preserve media errors */ | 
 | 			unsigned char mysense[16]; | 
 | 			memcpy (mysense, SRpnt->sense, 16); | 
 | 			memset (scmd, 0, MAX_COMMAND_SIZE); | 
 | 			scmd[0] = READ_POSITION; | 
 | 			STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24; | 
 | 			SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE, | 
 | 						    STp->timeout, MAX_RETRIES, 1); | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n", | 
 | 					name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:", | 
 | 					SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]); | 
 | #endif | 
 | 			if (!STp->buffer->syscall_result) | 
 | 				memcpy (SRpnt->sense, mysense, 16); | 
 | 			else | 
 | 				printk(KERN_WARNING "%s:W: Double error in get position\n", name); | 
 | 		} | 
 | 		STp->first_frame_position = ((STp->buffer)->b_data[4] << 24) | 
 | 					  + ((STp->buffer)->b_data[5] << 16) | 
 | 					  + ((STp->buffer)->b_data[6] << 8) | 
 | 					  +  (STp->buffer)->b_data[7]; | 
 | 		STp->last_frame_position  = ((STp->buffer)->b_data[ 8] << 24) | 
 | 					  + ((STp->buffer)->b_data[ 9] << 16) | 
 | 					  + ((STp->buffer)->b_data[10] <<  8) | 
 | 					  +  (STp->buffer)->b_data[11]; | 
 | 		STp->cur_frames           =  (STp->buffer)->b_data[15]; | 
 | #if DEBUG | 
 | 		if (debugging) { | 
 | 			printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name, | 
 | 					    STp->first_frame_position, STp->last_frame_position, | 
 | 					    ((STp->buffer)->b_data[0]&0x80)?" (BOP)": | 
 | 					    ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"", | 
 | 					    STp->cur_frames); | 
 | 		} | 
 | #endif | 
 | 		if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name, | 
 | 					STp->first_frame_position, STp->last_frame_position, STp->cur_frames); | 
 | #endif | 
 | 			STp->first_frame_position = STp->last_frame_position; | 
 | 		} | 
 | 	} | 
 | 	STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize; | 
 |  | 
 | 	return (result == 0 ? STp->first_frame_position : result); | 
 | } | 
 |  | 
 |  | 
 | /* Set the tape block */ | 
 | static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip) | 
 | { | 
 | 	unsigned char		scmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	struct st_partstat    * STps; | 
 | 	int			result = 0; | 
 | 	int			pp     = (ppos == 3000 && !skip)? 0 : ppos; | 
 | 	char		      * name   = tape_name(STp); | 
 |  | 
 | 	if (STp->ready != ST_READY) return (-EIO); | 
 |  | 
 | 	STps = &(STp->ps[STp->partition]); | 
 |  | 
 | 	if (ppos < 0 || ppos > STp->capacity) { | 
 | 		printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos); | 
 | 		pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1); | 
 | 		result = (-EINVAL); | 
 | 	} | 
 |  | 
 | 	do { | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp); | 
 | #endif | 
 | 		memset (scmd, 0, MAX_COMMAND_SIZE); | 
 | 		scmd[0] = SEEK_10; | 
 | 		scmd[1] = 1; | 
 | 		scmd[3] = (pp >> 24); | 
 | 		scmd[4] = (pp >> 16); | 
 | 		scmd[5] = (pp >> 8); | 
 | 		scmd[6] =  pp; | 
 | 		if (skip) | 
 | 			scmd[9] = 0x80; | 
 |  | 
 | 		SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout, | 
 | 								MAX_RETRIES, 1); | 
 | 		if (!SRpnt) | 
 | 			return (-EBUSY); | 
 | 		*aSRpnt  = SRpnt; | 
 |  | 
 | 		if ((STp->buffer)->syscall_result != 0) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n", | 
 | 					name, STp->first_frame_position, pp); | 
 | #endif | 
 | 			result = (-EIO); | 
 | 		} | 
 | 		if (pp != ppos) | 
 | 			osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); | 
 | 	} while ((pp != ppos) && (pp = ppos)); | 
 | 	STp->first_frame_position = STp->last_frame_position = ppos; | 
 | 	STps->eof = ST_NOEOF; | 
 | 	STps->at_sm = 0; | 
 | 	STps->rw = ST_IDLE; | 
 | 	STp->frame_in_buffer = 0; | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT) | 
 | { | 
 | 	struct st_partstat * STps = &(STp->ps[STp->partition]); | 
 | 	int result = 0; | 
 |  | 
 | 	if (STp->write_type != OS_WRITE_NEW_MARK) { | 
 | 		/* true unless the user wrote the filemark for us */ | 
 | 		result = osst_flush_drive_buffer(STp, aSRpnt); | 
 | 		if (result < 0) goto out; | 
 | 		result = osst_write_filemark(STp, aSRpnt); | 
 | 		if (result < 0) goto out; | 
 |  | 
 | 		if (STps->drv_file >= 0) | 
 | 			STps->drv_file++ ; | 
 | 		STps->drv_block = 0; | 
 | 	} | 
 | 	result = osst_write_eod(STp, aSRpnt); | 
 | 	osst_write_header(STp, aSRpnt, leave_at_EOT); | 
 |  | 
 | 	STps->eof = ST_FM; | 
 | out: | 
 | 	return result; | 
 | } | 
 |  | 
 | /* osst versions of st functions - augmented and stripped to suit OnStream only */ | 
 |  | 
 | /* Flush the write buffer (never need to write if variable blocksize). */ | 
 | static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt) | 
 | { | 
 | 	int			offset, transfer, blks = 0; | 
 | 	int			result = 0; | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt = *aSRpnt; | 
 | 	struct st_partstat    * STps; | 
 | 	char		      * name = tape_name(STp); | 
 |  | 
 | 	if ((STp->buffer)->writing) { | 
 | 		if (SRpnt == (STp->buffer)->last_SRpnt) | 
 | #if DEBUG | 
 | 			{ printk(OSST_DEB_MSG | 
 | 	 "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name); | 
 | #endif | 
 | 			*aSRpnt = SRpnt = NULL; | 
 | #if DEBUG | 
 | 			} else if (SRpnt) | 
 | 				printk(OSST_DEB_MSG | 
 | 	 "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name); | 
 | #endif	 | 
 | 		osst_write_behind_check(STp); | 
 | 		if ((STp->buffer)->syscall_result) { | 
 | #if DEBUG | 
 | 			if (debugging) | 
 | 				printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n", | 
 | 				       name, (STp->buffer)->midlevel_result); | 
 | #endif | 
 | 			if ((STp->buffer)->midlevel_result == INT_MAX) | 
 | 				return (-ENOSPC); | 
 | 			return (-EIO); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	result = 0; | 
 | 	if (STp->dirty == 1) { | 
 |  | 
 | 		STp->write_count++; | 
 | 		STps     = &(STp->ps[STp->partition]); | 
 | 		STps->rw = ST_WRITING; | 
 | 		offset   = STp->buffer->buffer_bytes; | 
 | 		blks     = (offset + STp->block_size - 1) / STp->block_size; | 
 | 		transfer = OS_FRAME_SIZE; | 
 | 		 | 
 | 		if (offset < OS_DATA_SIZE) | 
 | 			osst_zero_buffer_tail(STp->buffer); | 
 |  | 
 | 		if (STp->poll) | 
 | 			if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120)) | 
 | 				result = osst_recover_wait_frame(STp, aSRpnt, 1); | 
 |  | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = WRITE_6; | 
 | 		cmd[1] = 1; | 
 | 		cmd[4] = 1; | 
 |  | 
 | 		switch	(STp->write_type) { | 
 | 		   case OS_WRITE_DATA: | 
 | #if DEBUG | 
 |    			if (debugging) | 
 | 				printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", | 
 | 					name, blks, STp->frame_seq_number,  | 
 | 					STp->logical_blk_num - blks, STp->logical_blk_num - 1); | 
 | #endif | 
 | 			osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, | 
 | 				      STp->logical_blk_num - blks, STp->block_size, blks); | 
 | 			break; | 
 | 		   case OS_WRITE_EOD: | 
 | 			osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++, | 
 | 				      STp->logical_blk_num, 0, 0); | 
 | 			break; | 
 | 		   case OS_WRITE_NEW_MARK: | 
 | 			osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++, | 
 | 				      STp->logical_blk_num++, 0, blks=1); | 
 | 			break; | 
 | 		   case OS_WRITE_HEADER: | 
 | 			osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0); | 
 | 			break; | 
 | 		default: /* probably FILLER */ | 
 | 			osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0); | 
 | 		} | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n", | 
 | 			  			 name, offset, transfer, blks); | 
 | #endif | 
 |  | 
 | 		SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE, | 
 | 					      STp->timeout, MAX_RETRIES, 1); | 
 | 		*aSRpnt = SRpnt; | 
 | 		if (!SRpnt) | 
 | 			return (-EBUSY); | 
 |  | 
 | 		if ((STp->buffer)->syscall_result != 0) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG | 
 | 				"%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n", | 
 | 				name, SRpnt->sense[0], SRpnt->sense[2], | 
 | 				SRpnt->sense[12], SRpnt->sense[13]); | 
 | #endif | 
 | 			if ((SRpnt->sense[0] & 0x70) == 0x70 && | 
 | 			    (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */ | 
 | 			    (SRpnt->sense[2] & 0x0f) == NO_SENSE) { | 
 | 				STp->dirty = 0; | 
 | 				(STp->buffer)->buffer_bytes = 0; | 
 | 				result = (-ENOSPC); | 
 | 			} | 
 | 			else { | 
 | 				if (osst_write_error_recovery(STp, aSRpnt, 1)) { | 
 | 					printk(KERN_ERR "%s:E: Error on flush write.\n", name); | 
 | 					result = (-EIO); | 
 | 				} | 
 | 			} | 
 | 			STps->drv_block = (-1);		/* FIXME - even if write recovery succeeds? */ | 
 | 		} | 
 | 		else { | 
 | 			STp->first_frame_position++; | 
 | 			STp->dirty = 0; | 
 | 			(STp->buffer)->buffer_bytes = 0; | 
 | 		} | 
 | 	} | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result); | 
 | #endif | 
 | 	return result; | 
 | } | 
 |  | 
 |  | 
 | /* Flush the tape buffer. The tape will be positioned correctly unless | 
 |    seek_next is true. */ | 
 | static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next) | 
 | { | 
 | 	struct st_partstat * STps; | 
 | 	int    backspace = 0, result = 0; | 
 | #if DEBUG | 
 | 	char * name = tape_name(STp); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * If there was a bus reset, block further access | 
 | 	 * to this device. | 
 | 	 */ | 
 | 	if( STp->pos_unknown) | 
 | 		return (-EIO); | 
 |  | 
 | 	if (STp->ready != ST_READY) | 
 | 		return 0; | 
 |  | 
 | 	STps = &(STp->ps[STp->partition]); | 
 | 	if (STps->rw == ST_WRITING || STp->dirty) {	/* Writing */ | 
 | 		STp->write_type = OS_WRITE_DATA; | 
 | 		return osst_flush_write_buffer(STp, aSRpnt); | 
 | 	} | 
 | 	if (STp->block_size == 0) | 
 | 		return 0; | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name); | 
 | #endif | 
 |  | 
 | 	if (!STp->can_bsr) { | 
 | 		backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size - | 
 | 			    ((STp->buffer)->read_pointer + STp->block_size - 1        ) / STp->block_size ; | 
 | 		(STp->buffer)->buffer_bytes = 0; | 
 | 		(STp->buffer)->read_pointer = 0; | 
 | 		STp->frame_in_buffer = 0;		/* FIXME is this relevant w. OSST? */ | 
 | 	} | 
 |  | 
 | 	if (!seek_next) { | 
 | 		if (STps->eof == ST_FM_HIT) { | 
 | 			result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */ | 
 | 			if (!result) | 
 | 				STps->eof = ST_NOEOF; | 
 | 			else { | 
 | 				if (STps->drv_file >= 0) | 
 | 					STps->drv_file++; | 
 | 				STps->drv_block = 0; | 
 | 			} | 
 | 		} | 
 | 		if (!result && backspace > 0)	/* TODO -- design and run a test case for this */ | 
 | 			result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace); | 
 | 	} | 
 | 	else if (STps->eof == ST_FM_HIT) { | 
 | 		if (STps->drv_file >= 0) | 
 | 			STps->drv_file++; | 
 | 		STps->drv_block = 0; | 
 | 		STps->eof = ST_NOEOF; | 
 | 	} | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous) | 
 | { | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt; | 
 | 	int			blks; | 
 | #if DEBUG | 
 | 	char		      * name = tape_name(STp); | 
 | #endif | 
 |  | 
 | 	if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */ | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name); | 
 | #endif | 
 | 		if (osst_flush_drive_buffer(STp, aSRpnt) < 0) { | 
 | 			return (-EIO); | 
 | 		} | 
 | 		/* error recovery may have bumped us past the header partition */ | 
 | 		if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name); | 
 | #endif | 
 | 		osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (STp->poll) | 
 | 		if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120)) | 
 | 			if (osst_recover_wait_frame(STp, aSRpnt, 1)) | 
 | 				return (-EIO); | 
 |  | 
 | //	osst_build_stats(STp, &SRpnt); | 
 |  | 
 | 	STp->ps[STp->partition].rw = ST_WRITING; | 
 | 	STp->write_type            = OS_WRITE_DATA; | 
 | 			 | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0]   = WRITE_6; | 
 | 	cmd[1]   = 1; | 
 | 	cmd[4]   = 1;						/* one frame at a time... */ | 
 | 	blks     = STp->buffer->buffer_bytes / STp->block_size; | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks,  | 
 | 			STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1); | 
 | #endif | 
 | 	osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++, | 
 | 		      STp->logical_blk_num - blks, STp->block_size, blks); | 
 |  | 
 | #if DEBUG | 
 | 	if (!synchronous) | 
 | 		STp->write_pending = 1; | 
 | #endif | 
 | 	SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout, | 
 | 									MAX_RETRIES, synchronous); | 
 | 	if (!SRpnt) | 
 | 		return (-EBUSY); | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	if (synchronous) { | 
 | 		if (STp->buffer->syscall_result != 0) { | 
 | #if DEBUG | 
 | 			if (debugging) | 
 | 				printk(OSST_DEB_MSG "%s:D: Error on write:\n", name); | 
 | #endif | 
 | 			if ((SRpnt->sense[0] & 0x70) == 0x70 && | 
 | 			    (SRpnt->sense[2] & 0x40)) { | 
 | 				if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW) | 
 | 					return (-ENOSPC); | 
 | 			} | 
 | 			else { | 
 | 				if (osst_write_error_recovery(STp, aSRpnt, 1)) | 
 | 					return (-EIO); | 
 | 			} | 
 | 		} | 
 | 		else | 
 | 			STp->first_frame_position++; | 
 | 	} | 
 |  | 
 | 	STp->write_count++; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Lock or unlock the drive door. Don't use when struct osst_request allocated. */ | 
 | static int do_door_lock(struct osst_tape * STp, int do_lock) | 
 | { | 
 | 	int retval; | 
 |  | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl"); | 
 | #endif | 
 |  | 
 | 	retval = scsi_set_medium_removal(STp->device, | 
 | 			do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); | 
 | 	if (!retval) | 
 | 		STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED; | 
 | 	else | 
 | 		STp->door_locked = ST_LOCK_FAILS; | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* Set the internal state after reset */ | 
 | static void reset_state(struct osst_tape *STp) | 
 | { | 
 | 	int i; | 
 | 	struct st_partstat *STps; | 
 |  | 
 | 	STp->pos_unknown = 0; | 
 | 	for (i = 0; i < ST_NBR_PARTITIONS; i++) { | 
 | 		STps = &(STp->ps[i]); | 
 | 		STps->rw = ST_IDLE; | 
 | 		STps->eof = ST_NOEOF; | 
 | 		STps->at_sm = 0; | 
 | 		STps->last_block_valid = 0; | 
 | 		STps->drv_block = -1; | 
 | 		STps->drv_file = -1; | 
 | 	} | 
 | } | 
 | 				 | 
 |  | 
 | /* Entry points to osst */ | 
 |  | 
 | /* Write command */ | 
 | static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos) | 
 | { | 
 | 	ssize_t		      total, retval = 0; | 
 | 	ssize_t		      i, do_count, blks, transfer; | 
 | 	int		      write_threshold; | 
 | 	int		      doing_write = 0; | 
 | 	const char   __user * b_point; | 
 | 	struct osst_request * SRpnt = NULL; | 
 | 	struct st_modedef   * STm; | 
 | 	struct st_partstat  * STps; | 
 | 	struct osst_tape    * STp  = filp->private_data; | 
 | 	char		    * name = tape_name(STp); | 
 |  | 
 |  | 
 | 	if (mutex_lock_interruptible(&STp->lock)) | 
 | 		return (-ERESTARTSYS); | 
 |  | 
 | 	/* | 
 | 	 * If we are in the middle of error recovery, don't let anyone | 
 | 	 * else try and use this device.  Also, if error recovery fails, it | 
 | 	 * may try and take the device offline, in which case all further | 
 | 	 * access to the device is prohibited. | 
 | 	 */ | 
 | 	if( !scsi_block_when_processing_errors(STp->device) ) { | 
 | 		retval = (-ENXIO); | 
 | 		goto out; | 
 | 	} | 
 | 	 | 
 | 	if (STp->ready != ST_READY) { | 
 | 		if (STp->ready == ST_NO_TAPE) | 
 | 			retval = (-ENOMEDIUM); | 
 | 		else | 
 | 			retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 | 	STm = &(STp->modes[STp->current_mode]); | 
 | 	if (!STm->defined) { | 
 | 		retval = (-ENXIO); | 
 | 		goto out; | 
 | 	} | 
 | 	if (count == 0) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * If there was a bus reset, block further access | 
 | 	 * to this device. | 
 | 	 */ | 
 | 	if (STp->pos_unknown) { | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | #if DEBUG | 
 | 	if (!STp->in_use) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (STp->write_prot) { | 
 | 		retval = (-EACCES); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Write must be integral number of blocks */ | 
 | 	if (STp->block_size != 0 && (count % STp->block_size) != 0) { | 
 | 		printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n", | 
 | 				       name, count, STp->block_size<1024? | 
 | 				       STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); | 
 | 		retval = (-EINVAL); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) { | 
 | 		printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n", | 
 | 				       name, STp->first_frame_position); | 
 | 		retval = (-ENOSPC); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) | 
 | 		STp->door_locked = ST_LOCKED_AUTO; | 
 |  | 
 | 	STps = &(STp->ps[STp->partition]); | 
 |  | 
 | 	if (STps->rw == ST_READING) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name,  | 
 | 					STps->drv_file, STps->drv_block); | 
 | #endif | 
 | 		retval = osst_flush_buffer(STp, &SRpnt, 0); | 
 | 		if (retval) | 
 | 			goto out; | 
 | 		STps->rw = ST_IDLE; | 
 | 	} | 
 | 	if (STps->rw != ST_WRITING) { | 
 | 		/* Are we totally rewriting this tape? */ | 
 | 		if (!STp->header_ok || | 
 | 		    (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) || | 
 | 		    (STps->drv_file == 0 && STps->drv_block == 0)) { | 
 | 			STp->wrt_pass_cntr++; | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n", | 
 | 						  name, STp->wrt_pass_cntr); | 
 | #endif | 
 | 			osst_reset_header(STp, &SRpnt); | 
 | 			STps->drv_file = STps->drv_block = 0; | 
 | 		} | 
 | 		/* Do we know where we'll be writing on the tape? */ | 
 | 		else { | 
 | 			if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) || | 
 | 			  		STps->drv_file < 0 || STps->drv_block < 0) { | 
 | 				if (STp->first_frame_position == STp->eod_frame_ppos) {	/* at EOD */ | 
 | 			  		STps->drv_file = STp->filemark_cnt; | 
 | 			  		STps->drv_block = 0; | 
 | 				} | 
 | 				else { | 
 | 					/* We have no idea where the tape is positioned - give up */ | 
 | #if DEBUG | 
 | 					printk(OSST_DEB_MSG | 
 | 						"%s:D: Cannot write at indeterminate position.\n", name); | 
 | #endif | 
 | 					retval = (-EIO); | 
 | 					goto out; | 
 | 				} | 
 |       			}	   | 
 | 			if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) { | 
 | 				STp->filemark_cnt = STps->drv_file; | 
 | 				STp->last_mark_ppos = | 
 | 				       	ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]); | 
 | 				printk(KERN_WARNING | 
 | 					"%s:W: Overwriting file %d with old write pass counter %d\n", | 
 | 						name, STps->drv_file, STp->wrt_pass_cntr); | 
 | 				printk(KERN_WARNING | 
 | 					"%s:W: may lead to stale data being accepted on reading back!\n", | 
 | 						name); | 
 | #if DEBUG | 
 | 				printk(OSST_DEB_MSG | 
 | 				  "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n", | 
 | 					name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn); | 
 | #endif | 
 | 			} | 
 | 		} | 
 | 		STp->fast_open = 0; | 
 | 	} | 
 | 	if (!STp->header_ok) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name); | 
 | #endif | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if ((STp->buffer)->writing) { | 
 | if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__); | 
 | 		osst_write_behind_check(STp); | 
 | 		if ((STp->buffer)->syscall_result) { | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name, | 
 | 						 (STp->buffer)->midlevel_result); | 
 | #endif | 
 | 		if ((STp->buffer)->midlevel_result == INT_MAX) | 
 | 			STps->eof = ST_EOM_OK; | 
 | 		else | 
 | 			STps->eof = ST_EOM_ERROR; | 
 | 		} | 
 | 	} | 
 | 	if (STps->eof == ST_EOM_OK) { | 
 | 		retval = (-ENOSPC); | 
 | 		goto out; | 
 | 	} | 
 | 	else if (STps->eof == ST_EOM_ERROR) { | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Check the buffer readability in cases where copy_user might catch | 
 | 		 the problems after some tape movement. */ | 
 | 	if ((copy_from_user(&i, buf, 1) != 0 || | 
 | 	     copy_from_user(&i, buf + count - 1, 1) != 0)) { | 
 | 		retval = (-EFAULT); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!STm->do_buffer_writes) { | 
 | 		write_threshold = 1; | 
 | 	} | 
 | 	else | 
 | 		write_threshold = (STp->buffer)->buffer_blocks * STp->block_size; | 
 | 	if (!STm->do_async_writes) | 
 | 		write_threshold--; | 
 |  | 
 | 	total = count; | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n", | 
 | 				name, (int) count, STps->drv_file, STps->drv_block, | 
 | 				STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position); | 
 | #endif | 
 | 	b_point = buf; | 
 | 	while ((STp->buffer)->buffer_bytes + count > write_threshold) | 
 | 	{ | 
 | 		doing_write = 1; | 
 | 		do_count = (STp->buffer)->buffer_blocks * STp->block_size - | 
 | 			   (STp->buffer)->buffer_bytes; | 
 | 		if (do_count > count) | 
 | 			do_count = count; | 
 |  | 
 | 		i = append_to_buffer(b_point, STp->buffer, do_count); | 
 | 		if (i) { | 
 | 			retval = i; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		blks = do_count / STp->block_size; | 
 | 		STp->logical_blk_num += blks;  /* logical_blk_num is incremented as data is moved from user */ | 
 |    | 
 | 		i = osst_write_frame(STp, &SRpnt, 1); | 
 |  | 
 | 		if (i == (-ENOSPC)) { | 
 | 			transfer = STp->buffer->writing;	/* FIXME -- check this logic */ | 
 | 			if (transfer <= do_count) { | 
 | 				*ppos += do_count - transfer; | 
 | 				count -= do_count - transfer; | 
 | 				if (STps->drv_block >= 0) { | 
 | 					STps->drv_block += (do_count - transfer) / STp->block_size; | 
 | 				} | 
 | 				STps->eof = ST_EOM_OK; | 
 | 				retval = (-ENOSPC);		/* EOM within current request */ | 
 | #if DEBUG | 
 | 				if (debugging) | 
 | 				      printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n", | 
 | 							     name, (int) transfer); | 
 | #endif | 
 | 			} | 
 | 			else { | 
 | 				STps->eof = ST_EOM_ERROR; | 
 | 				STps->drv_block = (-1);		/* Too cautious? */ | 
 | 				retval = (-EIO);		/* EOM for old data */ | 
 | #if DEBUG | 
 | 				if (debugging) | 
 | 				      printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name); | 
 | #endif | 
 | 			} | 
 | 		} | 
 | 		else | 
 | 			retval = i; | 
 | 			 | 
 | 		if (retval < 0) { | 
 | 			if (SRpnt != NULL) { | 
 | 				osst_release_request(SRpnt); | 
 | 				SRpnt = NULL; | 
 | 			} | 
 | 			STp->buffer->buffer_bytes = 0; | 
 | 			STp->dirty = 0; | 
 | 			if (count < total) | 
 | 				retval = total - count; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		*ppos += do_count; | 
 | 		b_point += do_count; | 
 | 		count -= do_count; | 
 | 		if (STps->drv_block >= 0) { | 
 | 			STps->drv_block += blks; | 
 | 		} | 
 | 		STp->buffer->buffer_bytes = 0; | 
 | 		STp->dirty = 0; | 
 | 	}  /* end while write threshold exceeded */ | 
 |  | 
 | 	if (count != 0) { | 
 | 		STp->dirty = 1; | 
 | 		i = append_to_buffer(b_point, STp->buffer, count); | 
 | 		if (i) { | 
 | 			retval = i; | 
 | 			goto out; | 
 | 		} | 
 | 		blks = count / STp->block_size; | 
 | 		STp->logical_blk_num += blks; | 
 | 		if (STps->drv_block >= 0) { | 
 | 			STps->drv_block += blks; | 
 | 		} | 
 | 		*ppos += count; | 
 | 		count = 0; | 
 | 	} | 
 |  | 
 | 	if (doing_write && (STp->buffer)->syscall_result != 0) { | 
 | 		retval = (STp->buffer)->syscall_result; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) {  | 
 | 		/* Schedule an asynchronous write */ | 
 | 		(STp->buffer)->writing = ((STp->buffer)->buffer_bytes / | 
 | 					   STp->block_size) * STp->block_size; | 
 | 		STp->dirty = !((STp->buffer)->writing == | 
 | 				          (STp->buffer)->buffer_bytes); | 
 |  | 
 | 		i = osst_write_frame(STp, &SRpnt, 0); | 
 | 		if (i < 0) { | 
 | 			retval = (-EIO); | 
 | 			goto out; | 
 | 		} | 
 | 		SRpnt = NULL;			/* Prevent releasing this request! */ | 
 | 	} | 
 | 	STps->at_sm &= (total == 0); | 
 | 	if (total > 0) | 
 | 		STps->eof = ST_NOEOF; | 
 |  | 
 | 	retval = total; | 
 |  | 
 | out: | 
 | 	if (SRpnt != NULL) osst_release_request(SRpnt); | 
 |  | 
 | 	mutex_unlock(&STp->lock); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 | /* Read command */ | 
 | static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos) | 
 | { | 
 | 	ssize_t		      total, retval = 0; | 
 | 	ssize_t		      i, transfer; | 
 | 	int		      special; | 
 | 	struct st_modedef   * STm; | 
 | 	struct st_partstat  * STps; | 
 | 	struct osst_request * SRpnt = NULL; | 
 | 	struct osst_tape    * STp   = filp->private_data; | 
 | 	char		    * name  = tape_name(STp); | 
 |  | 
 |  | 
 | 	if (mutex_lock_interruptible(&STp->lock)) | 
 | 		return (-ERESTARTSYS); | 
 |  | 
 | 	/* | 
 | 	 * If we are in the middle of error recovery, don't let anyone | 
 | 	 * else try and use this device.  Also, if error recovery fails, it | 
 | 	 * may try and take the device offline, in which case all further | 
 | 	 * access to the device is prohibited. | 
 | 	 */ | 
 | 	if( !scsi_block_when_processing_errors(STp->device) ) { | 
 | 		retval = (-ENXIO); | 
 | 		goto out; | 
 | 	} | 
 | 	 | 
 | 	if (STp->ready != ST_READY) { | 
 | 		if (STp->ready == ST_NO_TAPE) | 
 | 			retval = (-ENOMEDIUM); | 
 | 		else | 
 | 			retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 | 	STm = &(STp->modes[STp->current_mode]); | 
 | 	if (!STm->defined) { | 
 | 		retval = (-ENXIO); | 
 | 		goto out; | 
 | 	} | 
 | #if DEBUG | 
 | 	if (!STp->in_use) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 | #endif | 
 | 	/* Must have initialized medium */ | 
 | 	if (!STp->header_ok) { | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1)) | 
 | 		STp->door_locked = ST_LOCKED_AUTO; | 
 |  | 
 | 	STps = &(STp->ps[STp->partition]); | 
 | 	if (STps->rw == ST_WRITING) { | 
 | 		retval = osst_flush_buffer(STp, &SRpnt, 0); | 
 | 		if (retval) | 
 | 			goto out; | 
 | 		STps->rw = ST_IDLE; | 
 | 		/* FIXME -- this may leave the tape without EOD and up2date headers */ | 
 | 	} | 
 |  | 
 | 	if ((count % STp->block_size) != 0) { | 
 | 		printk(KERN_WARNING | 
 | 		    "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count, | 
 | 		    STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k'); | 
 | 	} | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging && STps->eof != ST_NOEOF) | 
 | 		printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name, | 
 | 				     STps->eof, (STp->buffer)->buffer_bytes); | 
 | #endif | 
 | 	if ((STp->buffer)->buffer_bytes == 0 && | 
 | 	     STps->eof >= ST_EOD_1) { | 
 | 		if (STps->eof < ST_EOD) { | 
 | 			STps->eof += 1; | 
 | 			retval = 0; | 
 | 			goto out; | 
 | 		} | 
 | 		retval = (-EIO);  /* EOM or Blank Check */ | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Check the buffer writability before any tape movement. Don't alter | 
 | 		 buffer data. */ | 
 | 	if (copy_from_user(&i, buf, 1)             != 0 || | 
 | 	    copy_to_user  (buf, &i, 1)             != 0 || | 
 | 	    copy_from_user(&i, buf + count - 1, 1) != 0 || | 
 | 	    copy_to_user  (buf + count - 1, &i, 1) != 0) { | 
 | 		retval = (-EFAULT); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Loop until enough data in buffer or a special condition found */ | 
 | 	for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) { | 
 |  | 
 | 		/* Get new data if the buffer is empty */ | 
 | 		if ((STp->buffer)->buffer_bytes == 0) { | 
 | 			if (STps->eof == ST_FM_HIT) | 
 | 				break; | 
 | 			special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0); | 
 | 			if (special < 0) { 			/* No need to continue read */ | 
 | 				STp->frame_in_buffer = 0; | 
 | 				retval = special; | 
 | 				goto out; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Move the data from driver buffer to user buffer */ | 
 | 		if ((STp->buffer)->buffer_bytes > 0) { | 
 | #if DEBUG | 
 | 			if (debugging && STps->eof != ST_NOEOF) | 
 | 			    printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name, | 
 | 						 STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total)); | 
 | #endif | 
 | 		       	/* force multiple of block size, note block_size may have been adjusted */ | 
 | 			transfer = (((STp->buffer)->buffer_bytes < count - total ? | 
 | 				     (STp->buffer)->buffer_bytes : count - total)/ | 
 | 					STp->block_size) * STp->block_size; | 
 |  | 
 | 			if (transfer == 0) { | 
 | 				printk(KERN_WARNING | 
 | 				  "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n", | 
 | 			   		name, count, STp->block_size < 1024? | 
 | 					STp->block_size:STp->block_size/1024, | 
 | 				       	STp->block_size<1024?'b':'k'); | 
 | 				break; | 
 | 			} | 
 | 			i = from_buffer(STp->buffer, buf, transfer); | 
 | 			if (i)  { | 
 | 				retval = i; | 
 | 				goto out; | 
 | 			} | 
 | 			STp->logical_blk_num += transfer / STp->block_size; | 
 | 			STps->drv_block      += transfer / STp->block_size; | 
 | 			*ppos          += transfer; | 
 | 			buf                  += transfer; | 
 | 			total                += transfer; | 
 | 		} | 
 |   | 
 | 		if ((STp->buffer)->buffer_bytes == 0) { | 
 | #if DEBUG | 
 | 			if (debugging) | 
 | 				printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n", | 
 | 					       	name, STp->frame_seq_number); | 
 | #endif | 
 | 			STp->frame_in_buffer = 0; | 
 | 			STp->frame_seq_number++;              /* frame to look for next time */ | 
 | 		} | 
 | 	} /* for (total = 0, special = 0; total < count && !special; ) */ | 
 |  | 
 | 	/* Change the eof state if no data from tape or buffer */ | 
 | 	if (total == 0) { | 
 | 		if (STps->eof == ST_FM_HIT) { | 
 | 			STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM; | 
 | 			STps->drv_block = 0; | 
 | 			if (STps->drv_file >= 0) | 
 | 				STps->drv_file++; | 
 | 		} | 
 | 		else if (STps->eof == ST_EOD_1) { | 
 | 			STps->eof = ST_EOD_2; | 
 | 			if (STps->drv_block > 0 && STps->drv_file >= 0) | 
 | 				STps->drv_file++; | 
 | 			STps->drv_block = 0; | 
 | 		} | 
 | 		else if (STps->eof == ST_EOD_2) | 
 | 			STps->eof = ST_EOD; | 
 | 	} | 
 | 	else if (STps->eof == ST_FM) | 
 | 		STps->eof = ST_NOEOF; | 
 |  | 
 | 	retval = total; | 
 |  | 
 | out: | 
 | 	if (SRpnt != NULL) osst_release_request(SRpnt); | 
 |  | 
 | 	mutex_unlock(&STp->lock); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 |  | 
 | /* Set the driver options */ | 
 | static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name) | 
 | { | 
 |   printk(KERN_INFO | 
 | "%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n", | 
 | 	 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes, | 
 | 	 STm->do_read_ahead); | 
 |   printk(KERN_INFO | 
 | "%s:I:    can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n", | 
 | 	 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock); | 
 |   printk(KERN_INFO | 
 | "%s:I:    defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n", | 
 | 	 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, | 
 | 	 STp->scsi2_logical); | 
 |   printk(KERN_INFO | 
 | "%s:I:    sysv: %d\n", name, STm->sysv); | 
 | #if DEBUG | 
 |   printk(KERN_INFO | 
 | 	 "%s:D:    debugging: %d\n", | 
 | 	 name, debugging); | 
 | #endif | 
 | } | 
 |  | 
 |  | 
 | static int osst_set_options(struct osst_tape *STp, long options) | 
 | { | 
 | 	int		    value; | 
 | 	long		    code; | 
 | 	struct st_modedef * STm; | 
 | 	char		  * name = tape_name(STp); | 
 |  | 
 | 	STm = &(STp->modes[STp->current_mode]); | 
 | 	if (!STm->defined) { | 
 | 		memcpy(STm, &(STp->modes[0]), sizeof(*STm)); | 
 | 		modes_defined = 1; | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n", | 
 | 					     name, STp->current_mode); | 
 | #endif | 
 | 	} | 
 |  | 
 | 	code = options & MT_ST_OPTIONS; | 
 | 	if (code == MT_ST_BOOLEANS) { | 
 | 		STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0; | 
 | 		STm->do_async_writes  = (options & MT_ST_ASYNC_WRITES) != 0; | 
 | 		STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0; | 
 | 		STm->do_read_ahead    = (options & MT_ST_READ_AHEAD) != 0; | 
 | 		STp->two_fm	      = (options & MT_ST_TWO_FM) != 0; | 
 | 		STp->fast_mteom	      = (options & MT_ST_FAST_MTEOM) != 0; | 
 | 		STp->do_auto_lock     = (options & MT_ST_AUTO_LOCK) != 0; | 
 | 		STp->can_bsr          = (options & MT_ST_CAN_BSR) != 0; | 
 | 		STp->omit_blklims     = (options & MT_ST_NO_BLKLIMS) != 0; | 
 | 		if ((STp->device)->scsi_level >= SCSI_2) | 
 | 			STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; | 
 | 		STp->scsi2_logical    = (options & MT_ST_SCSI2LOGICAL) != 0; | 
 | 		STm->sysv	      = (options & MT_ST_SYSV) != 0; | 
 | #if DEBUG | 
 | 		debugging = (options & MT_ST_DEBUGGING) != 0; | 
 | #endif | 
 | 		osst_log_options(STp, STm, name); | 
 | 	} | 
 | 	else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) { | 
 | 		value = (code == MT_ST_SETBOOLEANS); | 
 | 		if ((options & MT_ST_BUFFER_WRITES) != 0) | 
 | 			STm->do_buffer_writes = value; | 
 | 		if ((options & MT_ST_ASYNC_WRITES) != 0) | 
 | 			STm->do_async_writes = value; | 
 | 		if ((options & MT_ST_DEF_WRITES) != 0) | 
 | 			STm->defaults_for_writes = value; | 
 | 		if ((options & MT_ST_READ_AHEAD) != 0) | 
 | 			STm->do_read_ahead = value; | 
 | 		if ((options & MT_ST_TWO_FM) != 0) | 
 | 			STp->two_fm = value; | 
 | 		if ((options & MT_ST_FAST_MTEOM) != 0) | 
 | 			STp->fast_mteom = value; | 
 | 		if ((options & MT_ST_AUTO_LOCK) != 0) | 
 | 			STp->do_auto_lock = value; | 
 | 		if ((options & MT_ST_CAN_BSR) != 0) | 
 | 			STp->can_bsr = value; | 
 | 		if ((options & MT_ST_NO_BLKLIMS) != 0) | 
 | 			STp->omit_blklims = value; | 
 | 		if ((STp->device)->scsi_level >= SCSI_2 && | 
 | 		    (options & MT_ST_CAN_PARTITIONS) != 0) | 
 | 			STp->can_partitions = value; | 
 | 		if ((options & MT_ST_SCSI2LOGICAL) != 0) | 
 | 			STp->scsi2_logical = value; | 
 | 		if ((options & MT_ST_SYSV) != 0) | 
 | 			STm->sysv = value; | 
 | #if DEBUG | 
 | 		if ((options & MT_ST_DEBUGGING) != 0) | 
 | 			debugging = value; | 
 | #endif | 
 | 		osst_log_options(STp, STm, name); | 
 | 	} | 
 | 	else if (code == MT_ST_WRITE_THRESHOLD) { | 
 | 		value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE; | 
 | 		if (value < 1 || value > osst_buffer_size) { | 
 | 			printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n", | 
 | 					     name, value); | 
 | 			return (-EIO); | 
 | 		} | 
 | 		STp->write_threshold = value; | 
 | 		printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n", | 
 | 				  name, value); | 
 | 	} | 
 | 	else if (code == MT_ST_DEF_BLKSIZE) { | 
 | 		value = (options & ~MT_ST_OPTIONS); | 
 | 		if (value == ~MT_ST_OPTIONS) { | 
 | 			STm->default_blksize = (-1); | 
 | 			printk(KERN_INFO "%s:I: Default block size disabled.\n", name); | 
 | 		} | 
 | 		else { | 
 | 			if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) { | 
 | 				printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n", | 
 | 							 name, value); | 
 | 				return (-EINVAL); | 
 | 			} | 
 | 			STm->default_blksize = value; | 
 | 			printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n", | 
 | 					  name, STm->default_blksize); | 
 | 		} | 
 | 	} | 
 | 	else if (code == MT_ST_TIMEOUTS) { | 
 | 		value = (options & ~MT_ST_OPTIONS); | 
 | 		if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) { | 
 | 			STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ; | 
 | 			printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name, | 
 | 					     (value & ~MT_ST_SET_LONG_TIMEOUT)); | 
 | 		} | 
 | 		else { | 
 | 			STp->timeout = value * HZ; | 
 | 			printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value); | 
 | 		} | 
 | 	} | 
 | 	else if (code == MT_ST_DEF_OPTIONS) { | 
 | 		code = (options & ~MT_ST_CLEAR_DEFAULT); | 
 | 		value = (options & MT_ST_CLEAR_DEFAULT); | 
 | 		if (code == MT_ST_DEF_DENSITY) { | 
 | 			if (value == MT_ST_CLEAR_DEFAULT) { | 
 | 				STm->default_density = (-1); | 
 | 				printk(KERN_INFO "%s:I: Density default disabled.\n", name); | 
 | 			} | 
 | 			else { | 
 | 				STm->default_density = value & 0xff; | 
 | 				printk(KERN_INFO "%s:I: Density default set to %x\n", | 
 | 						  name, STm->default_density); | 
 | 			} | 
 | 		} | 
 | 		else if (code == MT_ST_DEF_DRVBUFFER) { | 
 | 			if (value == MT_ST_CLEAR_DEFAULT) { | 
 | 				STp->default_drvbuffer = 0xff; | 
 | 				printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name); | 
 | 			} | 
 | 			else { | 
 | 				STp->default_drvbuffer = value & 7; | 
 | 				printk(KERN_INFO "%s:I: Drive buffer default set to %x\n", | 
 | 						  name, STp->default_drvbuffer); | 
 | 			} | 
 | 		} | 
 | 		else if (code == MT_ST_DEF_COMPRESSION) { | 
 | 			if (value == MT_ST_CLEAR_DEFAULT) { | 
 | 				STm->default_compression = ST_DONT_TOUCH; | 
 | 				printk(KERN_INFO "%s:I: Compression default disabled.\n", name); | 
 | 			} | 
 | 			else { | 
 | 				STm->default_compression = (value & 1 ? ST_YES : ST_NO); | 
 | 				printk(KERN_INFO "%s:I: Compression default set to %x\n", | 
 | 						  name, (value & 1)); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	else | 
 | 		return (-EIO); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* Internal ioctl function */ | 
 | static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt, | 
 | 			     unsigned int cmd_in, unsigned long arg) | 
 | { | 
 | 	int			timeout; | 
 | 	long			ltmp; | 
 | 	int			i, ioctl_result; | 
 | 	int			chg_eof = 1; | 
 | 	unsigned char		cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request   * SRpnt = * aSRpnt; | 
 | 	struct st_partstat    * STps; | 
 | 	int			fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num; | 
 | 	int			datalen = 0, direction = DMA_NONE; | 
 | 	char		      * name = tape_name(STp); | 
 |  | 
 | 	if (STp->ready != ST_READY && cmd_in != MTLOAD) { | 
 | 		if (STp->ready == ST_NO_TAPE) | 
 | 			return (-ENOMEDIUM); | 
 | 		else | 
 | 			return (-EIO); | 
 | 	} | 
 | 	timeout = STp->long_timeout; | 
 | 	STps = &(STp->ps[STp->partition]); | 
 | 	fileno = STps->drv_file; | 
 | 	blkno = STps->drv_block; | 
 | 	at_sm = STps->at_sm; | 
 | 	frame_seq_numbr = STp->frame_seq_number; | 
 | 	logical_blk_num = STp->logical_blk_num; | 
 |  | 
 | 	memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 	switch (cmd_in) { | 
 | 	 case MTFSFM: | 
 | 		chg_eof = 0; /* Changed from the FSF after this */ | 
 | 	 case MTFSF: | 
 | 		if (STp->raw) | 
 | 		   return (-EIO); | 
 | 		if (STp->linux_media) | 
 | 		   ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg); | 
 | 		else | 
 | 		   ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg); | 
 | 		if (fileno >= 0) | 
 | 		   fileno += arg; | 
 | 		blkno = 0; | 
 | 		at_sm &= (arg == 0); | 
 | 		goto os_bypass; | 
 |  | 
 | 	 case MTBSF: | 
 | 		chg_eof = 0; /* Changed from the FSF after this */ | 
 | 	 case MTBSFM: | 
 | 		if (STp->raw) | 
 | 		   return (-EIO); | 
 | 		ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg); | 
 | 		if (fileno >= 0) | 
 | 		   fileno -= arg; | 
 | 		blkno = (-1);  /* We can't know the block number */ | 
 | 		at_sm &= (arg == 0); | 
 | 		goto os_bypass; | 
 |  | 
 | 	 case MTFSR: | 
 | 	 case MTBSR: | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 		   printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n", | 
 | 				name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num); | 
 | #endif | 
 | 		if (cmd_in == MTFSR) { | 
 | 		   logical_blk_num += arg; | 
 | 		   if (blkno >= 0) blkno += arg; | 
 | 		} | 
 | 		else { | 
 | 		   logical_blk_num -= arg; | 
 | 		   if (blkno >= 0) blkno -= arg; | 
 | 		} | 
 | 		ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num); | 
 | 		fileno = STps->drv_file; | 
 | 		blkno  = STps->drv_block; | 
 | 		at_sm &= (arg == 0); | 
 | 		goto os_bypass; | 
 |  | 
 | 	 case MTFSS: | 
 | 		cmd[0] = SPACE; | 
 | 		cmd[1] = 0x04; /* Space Setmarks */   /* FIXME -- OS can't do this? */ | 
 | 		cmd[2] = (arg >> 16); | 
 | 		cmd[3] = (arg >> 8); | 
 | 		cmd[4] = arg; | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name, | 
 | 		cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); | 
 | #endif | 
 | 		if (arg != 0) { | 
 | 			blkno = fileno = (-1); | 
 | 			at_sm = 1; | 
 | 		} | 
 | 		break; | 
 | 	 case MTBSS: | 
 | 		cmd[0] = SPACE; | 
 | 		cmd[1] = 0x04; /* Space Setmarks */   /* FIXME -- OS can't do this? */ | 
 | 		ltmp = (-arg); | 
 | 		cmd[2] = (ltmp >> 16); | 
 | 		cmd[3] = (ltmp >> 8); | 
 | 		cmd[4] = ltmp; | 
 | #if DEBUG | 
 | 		if (debugging) { | 
 | 			if (cmd[2] & 0x80) | 
 | 			   ltmp = 0xff000000; | 
 | 			ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4]; | 
 | 			printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n", | 
 | 						name, (-ltmp)); | 
 | 		 } | 
 | #endif | 
 | 		 if (arg != 0) { | 
 | 			blkno = fileno = (-1); | 
 | 			at_sm = 1; | 
 | 		 } | 
 | 		 break; | 
 | 	 case MTWEOF: | 
 | 		 if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { | 
 | 			STp->write_type = OS_WRITE_DATA; | 
 | 			ioctl_result = osst_flush_write_buffer(STp, &SRpnt); | 
 | 		 } else | 
 | 			ioctl_result = 0; | 
 | #if DEBUG | 
 | 		 if (debugging)  | 
 | 			   printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg); | 
 | #endif | 
 | 		 for (i=0; i<arg; i++) | 
 | 			ioctl_result |= osst_write_filemark(STp, &SRpnt); | 
 | 		 if (fileno >= 0) fileno += arg; | 
 | 		 if (blkno  >= 0) blkno   = 0; | 
 | 		 goto os_bypass; | 
 |  | 
 | 	 case MTWSM: | 
 | 		 if (STp->write_prot) | 
 | 			return (-EACCES); | 
 | 		 if (!STp->raw) | 
 | 			return 0; | 
 | 		 cmd[0] = WRITE_FILEMARKS;   /* FIXME -- need OS version */ | 
 | 		 if (cmd_in == MTWSM) | 
 | 			 cmd[1] = 2; | 
 | 		 cmd[2] = (arg >> 16); | 
 | 		 cmd[3] = (arg >> 8); | 
 | 		 cmd[4] = arg; | 
 | 		 timeout = STp->timeout; | 
 | #if DEBUG | 
 | 		 if (debugging)  | 
 | 			   printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name, | 
 | 				  cmd[2] * 65536 + cmd[3] * 256 + cmd[4]); | 
 | #endif | 
 | 		 if (fileno >= 0) | 
 | 			fileno += arg; | 
 | 		 blkno = 0; | 
 | 		 at_sm = (cmd_in == MTWSM); | 
 | 		 break; | 
 | 	 case MTOFFL: | 
 | 	 case MTLOAD: | 
 | 	 case MTUNLOAD: | 
 | 	 case MTRETEN: | 
 | 		 cmd[0] = START_STOP; | 
 | 		 cmd[1] = 1;			/* Don't wait for completion */ | 
 | 		 if (cmd_in == MTLOAD) { | 
 | 		     if (STp->ready == ST_NO_TAPE) | 
 | 			 cmd[4] = 4;		/* open tray */ | 
 | 		      else | 
 | 			 cmd[4] = 1;		/* load */ | 
 | 		 } | 
 | 		 if (cmd_in == MTRETEN) | 
 | 			 cmd[4] = 3;		/* retension then mount */ | 
 | 		 if (cmd_in == MTOFFL) | 
 | 			 cmd[4] = 4;		/* rewind then eject */ | 
 | 		 timeout = STp->timeout; | 
 | #if DEBUG | 
 | 		 if (debugging) { | 
 | 			 switch (cmd_in) { | 
 | 				 case MTUNLOAD: | 
 | 					 printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name); | 
 | 					 break; | 
 | 				 case MTLOAD: | 
 | 					 printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name); | 
 | 					 break; | 
 | 				 case MTRETEN: | 
 | 					 printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name); | 
 | 					 break; | 
 | 				 case MTOFFL: | 
 | 					 printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name); | 
 | 					 break; | 
 | 			 } | 
 | 		 } | 
 | #endif | 
 |        fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; | 
 | 		 break; | 
 | 	 case MTNOP: | 
 | #if DEBUG | 
 | 		 if (debugging) | 
 | 			 printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name); | 
 | #endif | 
 | 		 return 0;  /* Should do something ? */ | 
 | 		 break; | 
 | 	 case MTEOM: | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 		   printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name); | 
 | #endif | 
 | 		if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) || | 
 | 			    (osst_get_logical_frame(STp, &SRpnt, -1, 0)               < 0)) { | 
 | 		   ioctl_result = -EIO; | 
 | 		   goto os_bypass; | 
 | 		} | 
 | 		if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) { | 
 | #if DEBUG | 
 | 		   printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name); | 
 | #endif | 
 | 		   ioctl_result = -EIO; | 
 | 		   goto os_bypass; | 
 | 		} | 
 | 		ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0); | 
 | 		fileno = STp->filemark_cnt; | 
 | 		blkno  = at_sm = 0; | 
 | 		goto os_bypass; | 
 |  | 
 | 	 case MTERASE: | 
 | 		if (STp->write_prot) | 
 | 		   return (-EACCES); | 
 | 		ioctl_result = osst_reset_header(STp, &SRpnt); | 
 | 		i = osst_write_eod(STp, &SRpnt); | 
 | 		if (i < ioctl_result) ioctl_result = i; | 
 | 		i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos); | 
 | 		if (i < ioctl_result) ioctl_result = i; | 
 | 		fileno = blkno = at_sm = 0 ; | 
 | 		goto os_bypass; | 
 |  | 
 | 	 case MTREW: | 
 | 		cmd[0] = REZERO_UNIT; /* rewind */ | 
 | 		cmd[1] = 1; | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 		   printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]); | 
 | #endif | 
 | 		fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ; | 
 | 		break; | 
 |  | 
 | 	 case MTSETBLK:           /* Set block length */ | 
 | 		 if ((STps->drv_block == 0 )			  && | 
 | 		     !STp->dirty				  && | 
 | 		     ((STp->buffer)->buffer_bytes == 0)		  && | 
 | 		     ((arg & MT_ST_BLKSIZE_MASK) >= 512 )	  &&  | 
 | 		     ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) && | 
 | 		     !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))  ) { | 
 | 			 /* | 
 | 			  * Only allowed to change the block size if you opened the | 
 | 			  * device at the beginning of a file before writing anything. | 
 | 			  * Note, that when reading, changing block_size is futile, | 
 | 			  * as the size used when writing overrides it. | 
 | 			  */ | 
 | 			 STp->block_size = (arg & MT_ST_BLKSIZE_MASK); | 
 | 			 printk(KERN_INFO "%s:I: Block size set to %d bytes.\n", | 
 | 					   name, STp->block_size); | 
 | 			 return 0; | 
 | 		 } | 
 | 	 case MTSETDENSITY:       /* Set tape density */ | 
 | 	 case MTSETDRVBUFFER:     /* Set drive buffering */ | 
 | 	 case SET_DENS_AND_BLK:   /* Set density and block size */ | 
 | 		 chg_eof = 0; | 
 | 		 if (STp->dirty || (STp->buffer)->buffer_bytes != 0) | 
 | 			 return (-EIO);       /* Not allowed if data in buffer */ | 
 | 		 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) && | 
 | 		     (arg & MT_ST_BLKSIZE_MASK) != 0                    && | 
 | 		     (arg & MT_ST_BLKSIZE_MASK) != STp->block_size       ) { | 
 | 			 printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n", | 
 | 						name, (int)(arg & MT_ST_BLKSIZE_MASK), | 
 | 						(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now"); | 
 | 			 return (-EINVAL); | 
 | 		 } | 
 | 		 return 0;  /* FIXME silently ignore if block size didn't change */ | 
 |  | 
 | 	 default: | 
 | 		return (-ENOSYS); | 
 | 	} | 
 |  | 
 | 	SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1); | 
 |  | 
 | 	ioctl_result = (STp->buffer)->syscall_result; | 
 |  | 
 | 	if (!SRpnt) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name); | 
 | #endif | 
 | 		return ioctl_result; | 
 | 	} | 
 |  | 
 | 	if (!ioctl_result) {  /* SCSI command successful */ | 
 | 		STp->frame_seq_number = frame_seq_numbr; | 
 | 		STp->logical_blk_num  = logical_blk_num; | 
 | 	} | 
 |  | 
 | os_bypass: | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result); | 
 | #endif | 
 |  | 
 | 	if (!ioctl_result) {				/* success */ | 
 |  | 
 | 		if (cmd_in == MTFSFM) { | 
 | 			 fileno--; | 
 | 			 blkno--; | 
 | 		} | 
 | 		if (cmd_in == MTBSFM) { | 
 | 			 fileno++; | 
 | 			 blkno++; | 
 | 		} | 
 | 		STps->drv_block = blkno; | 
 | 		STps->drv_file = fileno; | 
 | 		STps->at_sm = at_sm; | 
 |  | 
 | 		if (cmd_in == MTEOM) | 
 | 			STps->eof = ST_EOD; | 
 | 		else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) { | 
 | 			ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1); | 
 | 			STps->drv_block++; | 
 | 			STp->logical_blk_num++; | 
 | 			STp->frame_seq_number++; | 
 | 			STp->frame_in_buffer = 0; | 
 | 			STp->buffer->read_pointer = 0; | 
 | 		} | 
 | 		else if (cmd_in == MTFSF) | 
 | 			STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM; | 
 | 		else if (chg_eof) | 
 | 			STps->eof = ST_NOEOF; | 
 |  | 
 | 		if (cmd_in == MTOFFL || cmd_in == MTUNLOAD) | 
 | 			STp->rew_at_close = 0; | 
 | 		else if (cmd_in == MTLOAD) { | 
 | 			for (i=0; i < ST_NBR_PARTITIONS; i++) { | 
 | 			    STp->ps[i].rw = ST_IDLE; | 
 | 			    STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */ | 
 | 			} | 
 | 			STp->partition = 0; | 
 | 		} | 
 |  | 
 | 		if (cmd_in == MTREW) { | 
 | 			ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);  | 
 | 			if (ioctl_result > 0) | 
 | 				ioctl_result = 0; | 
 | 		} | 
 |  | 
 | 	} else if (cmd_in == MTBSF || cmd_in == MTBSFM ) { | 
 | 		if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0) | 
 | 			STps->drv_file = STps->drv_block = -1; | 
 | 		else | 
 | 			STps->drv_file = STps->drv_block = 0; | 
 | 		STps->eof = ST_NOEOF; | 
 | 	} else if (cmd_in == MTFSF || cmd_in == MTFSFM) { | 
 | 		if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) | 
 | 			STps->drv_file = STps->drv_block = -1; | 
 | 		else { | 
 | 			STps->drv_file  = STp->filemark_cnt; | 
 | 			STps->drv_block = 0; | 
 | 		} | 
 | 		STps->eof = ST_EOD; | 
 | 	} else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) { | 
 | 		STps->drv_file = STps->drv_block = (-1); | 
 | 		STps->eof = ST_NOEOF; | 
 | 		STp->header_ok = 0; | 
 | 	} else if (cmd_in == MTERASE) { | 
 | 		STp->header_ok = 0; | 
 | 	} else if (SRpnt) {  /* SCSI command was not completely successful. */ | 
 | 		if (SRpnt->sense[2] & 0x40) { | 
 | 			STps->eof = ST_EOM_OK; | 
 | 			STps->drv_block = 0; | 
 | 		} | 
 | 		if (chg_eof) | 
 | 			STps->eof = ST_NOEOF; | 
 |  | 
 | 		if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK) | 
 | 			STps->eof = ST_EOD; | 
 |  | 
 | 		if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60)) | 
 | 			ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE); | 
 | 	} | 
 | 	*aSRpnt = SRpnt; | 
 |  | 
 | 	return ioctl_result; | 
 | } | 
 |  | 
 |  | 
 | /* Open the device */ | 
 | static int __os_scsi_tape_open(struct inode * inode, struct file * filp) | 
 | { | 
 | 	unsigned short	      flags; | 
 | 	int		      i, b_size, new_session = 0, retval = 0; | 
 | 	unsigned char	      cmd[MAX_COMMAND_SIZE]; | 
 | 	struct osst_request * SRpnt = NULL; | 
 | 	struct osst_tape    * STp; | 
 | 	struct st_modedef   * STm; | 
 | 	struct st_partstat  * STps; | 
 | 	char		    * name; | 
 | 	int		      dev  = TAPE_NR(inode); | 
 | 	int		      mode = TAPE_MODE(inode); | 
 |  | 
 | 	/* | 
 | 	 * We really want to do nonseekable_open(inode, filp); here, but some | 
 | 	 * versions of tar incorrectly call lseek on tapes and bail out if that | 
 | 	 * fails.  So we disallow pread() and pwrite(), but permit lseeks. | 
 | 	 */ | 
 | 	filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); | 
 |  | 
 | 	write_lock(&os_scsi_tapes_lock); | 
 | 	if (dev >= osst_max_dev || os_scsi_tapes == NULL || | 
 | 	    (STp = os_scsi_tapes[dev]) == NULL || !STp->device) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | 		return (-ENXIO); | 
 | 	} | 
 |  | 
 | 	name = tape_name(STp); | 
 |  | 
 | 	if (STp->in_use) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name); | 
 | #endif | 
 | 		return (-EBUSY); | 
 | 	} | 
 | 	if (scsi_device_get(STp->device)) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | #if DEBUG | 
 |                 printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name); | 
 | #endif | 
 | 		return (-ENXIO); | 
 | 	} | 
 | 	filp->private_data = STp; | 
 | 	STp->in_use = 1; | 
 | 	write_unlock(&os_scsi_tapes_lock); | 
 | 	STp->rew_at_close = TAPE_REWIND(inode); | 
 |  | 
 | 	if( !scsi_block_when_processing_errors(STp->device) ) { | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	if (mode != STp->current_mode) { | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n", | 
 | 					       name, STp->current_mode, mode); | 
 | #endif | 
 | 		new_session = 1; | 
 | 		STp->current_mode = mode; | 
 | 	} | 
 | 	STm = &(STp->modes[STp->current_mode]); | 
 |  | 
 | 	flags = filp->f_flags; | 
 | 	STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY); | 
 |  | 
 | 	STp->raw = TAPE_IS_RAW(inode); | 
 | 	if (STp->raw) | 
 | 		STp->header_ok = 0; | 
 |  | 
 | 	/* Allocate data segments for this device's tape buffer */ | 
 | 	if (!enlarge_buffer(STp->buffer, STp->restr_dma)) { | 
 | 		printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name); | 
 | 		retval = (-EOVERFLOW); | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (STp->buffer->buffer_size >= OS_FRAME_SIZE) { | 
 | 		for (i = 0, b_size = 0;  | 
 | 		     (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE);  | 
 | 		     b_size += STp->buffer->sg[i++].length); | 
 | 		STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size); | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name, | 
 | 			STp->buffer->b_data, page_address(STp->buffer->sg[0].page)); | 
 | 		printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name, | 
 | 			 STp->buffer->aux, i, page_address(STp->buffer->sg[i].page)); | 
 | #endif | 
 | 	} else { | 
 | 		STp->buffer->aux = NULL; /* this had better never happen! */ | 
 | 		printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE); | 
 | 		retval = (-EIO); | 
 | 		goto err_out; | 
 | 	} | 
 | 	STp->buffer->writing = 0; | 
 | 	STp->buffer->syscall_result = 0; | 
 | 	STp->dirty = 0; | 
 | 	for (i=0; i < ST_NBR_PARTITIONS; i++) { | 
 | 		STps = &(STp->ps[i]); | 
 | 		STps->rw = ST_IDLE; | 
 | 	} | 
 | 	STp->ready = ST_READY; | 
 | #if DEBUG | 
 | 	STp->nbr_waits = STp->nbr_finished = 0; | 
 | #endif | 
 |  | 
 | 	memset (cmd, 0, MAX_COMMAND_SIZE); | 
 | 	cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 	SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1); | 
 | 	if (!SRpnt) { | 
 | 		retval = (STp->buffer)->syscall_result;		/* FIXME - valid? */ | 
 | 		goto err_out; | 
 | 	} | 
 | 	if ((SRpnt->sense[0] & 0x70) == 0x70      && | 
 | 	    (SRpnt->sense[2] & 0x0f) == NOT_READY && | 
 | 	     SRpnt->sense[12]        == 4         ) { | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]); | 
 | #endif | 
 | 		if (filp->f_flags & O_NONBLOCK) { | 
 | 			retval = -EAGAIN; | 
 | 			goto err_out; | 
 | 		} | 
 | 		if (SRpnt->sense[13] == 2) {	/* initialize command required (LOAD) */ | 
 | 			memset (cmd, 0, MAX_COMMAND_SIZE); | 
 |         		cmd[0] = START_STOP; | 
 | 			cmd[1] = 1; | 
 | 			cmd[4] = 1; | 
 | 			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, | 
 | 					     STp->timeout, MAX_RETRIES, 1); | 
 | 		} | 
 | 		osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0); | 
 | 	} | 
 | 	if ((SRpnt->sense[0] & 0x70) == 0x70 && | 
 | 	    (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */ | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name); | 
 | #endif | 
 | 		STp->header_ok = 0; | 
 |  | 
 | 		for (i=0; i < 10; i++) { | 
 |  | 
 | 			memset (cmd, 0, MAX_COMMAND_SIZE); | 
 | 			cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, | 
 | 					     STp->timeout, MAX_RETRIES, 1); | 
 | 			if ((SRpnt->sense[0] & 0x70) != 0x70 || | 
 | 			    (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		STp->pos_unknown = 0; | 
 | 		STp->partition = STp->new_partition = 0; | 
 | 		if (STp->can_partitions) | 
 | 			STp->nbr_partitions = 1;  /* This guess will be updated later if necessary */ | 
 | 		for (i=0; i < ST_NBR_PARTITIONS; i++) { | 
 | 			STps = &(STp->ps[i]); | 
 | 			STps->rw = ST_IDLE;		/* FIXME - seems to be redundant... */ | 
 | 			STps->eof = ST_NOEOF; | 
 | 			STps->at_sm = 0; | 
 | 			STps->last_block_valid = 0; | 
 | 			STps->drv_block = 0; | 
 | 			STps->drv_file = 0 ; | 
 | 		} | 
 | 		new_session = 1; | 
 | 		STp->recover_count = 0; | 
 | 		STp->abort_count = 0; | 
 | 	} | 
 | 	/* | 
 | 	 * if we have valid headers from before, and the drive/tape seem untouched, | 
 | 	 * open without reconfiguring and re-reading the headers | 
 | 	 */ | 
 | 	if (!STp->buffer->syscall_result && STp->header_ok && | 
 | 	    !SRpnt->result && SRpnt->sense[0] == 0) { | 
 |  | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = MODE_SENSE; | 
 | 		cmd[1] = 8; | 
 | 		cmd[2] = VENDOR_IDENT_PAGE; | 
 | 		cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH; | 
 |  | 
 | 		SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1); | 
 |  | 
 | 		if (STp->buffer->syscall_result                     || | 
 | 		    STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' || | 
 | 		    STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' || | 
 | 		    STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' || | 
 | 		    STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4'  ) { | 
 | #if DEBUG | 
 | 			printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name, | 
 | 			  STp->buffer->b_data[MODE_HEADER_LENGTH + 2], | 
 | 			  STp->buffer->b_data[MODE_HEADER_LENGTH + 3], | 
 | 			  STp->buffer->b_data[MODE_HEADER_LENGTH + 4], | 
 | 			  STp->buffer->b_data[MODE_HEADER_LENGTH + 5]); | 
 | #endif | 
 | 			STp->header_ok = 0; | 
 | 		} | 
 | 		i = STp->first_frame_position; | 
 | 		if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) { | 
 | 			if (STp->door_locked == ST_UNLOCKED) { | 
 | 				if (do_door_lock(STp, 1)) | 
 | 					printk(KERN_INFO "%s:I: Can't lock drive door\n", name); | 
 | 				else | 
 | 					STp->door_locked = ST_LOCKED_AUTO; | 
 | 			} | 
 | 			if (!STp->frame_in_buffer) { | 
 | 				STp->block_size = (STm->default_blksize > 0) ? | 
 | 							STm->default_blksize : OS_DATA_SIZE; | 
 | 				STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0; | 
 | 			} | 
 | 			STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size; | 
 | 			STp->fast_open = 1; | 
 | 			osst_release_request(SRpnt); | 
 | 			return 0; | 
 | 		} | 
 | #if DEBUG | 
 | 		if (i != STp->first_frame_position) | 
 | 			printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n", | 
 | 						name, i, STp->first_frame_position); | 
 | #endif | 
 | 		STp->header_ok = 0; | 
 | 	} | 
 | 	STp->fast_open = 0; | 
 |  | 
 | 	if ((STp->buffer)->syscall_result != 0 &&   /* in all error conditions except no medium */  | 
 | 	    (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) { | 
 |  | 
 | 		memset(cmd, 0, MAX_COMMAND_SIZE); | 
 | 		cmd[0] = MODE_SELECT; | 
 | 		cmd[1] = 0x10; | 
 | 		cmd[4] = 4 + MODE_HEADER_LENGTH; | 
 |  | 
 | 		(STp->buffer)->b_data[0] = cmd[4] - 1; | 
 | 		(STp->buffer)->b_data[1] = 0;			/* Medium Type - ignoring */ | 
 | 		(STp->buffer)->b_data[2] = 0;			/* Reserved */ | 
 | 		(STp->buffer)->b_data[3] = 0;			/* Block Descriptor Length */ | 
 | 		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f; | 
 | 		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1; | 
 | 		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2; | 
 | 		(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3; | 
 |  | 
 | #if DEBUG | 
 | 		printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name); | 
 | #endif | 
 | 		SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1); | 
 |  | 
 | 		STp->header_ok = 0; | 
 |  | 
 | 		for (i=0; i < 10; i++) { | 
 |  | 
 | 			memset (cmd, 0, MAX_COMMAND_SIZE); | 
 | 			cmd[0] = TEST_UNIT_READY; | 
 |  | 
 | 			SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, | 
 | 						    STp->timeout, MAX_RETRIES, 1); | 
 | 			if ((SRpnt->sense[0] & 0x70) != 0x70 || | 
 | 			    (SRpnt->sense[2] & 0x0f) == NOT_READY) | 
 | 			break; | 
 |  | 
 | 			if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { | 
 | 				int j; | 
 |  | 
 | 				STp->pos_unknown = 0; | 
 | 				STp->partition = STp->new_partition = 0; | 
 | 				if (STp->can_partitions) | 
 | 					STp->nbr_partitions = 1;  /* This guess will be updated later if necessary */ | 
 | 				for (j = 0; j < ST_NBR_PARTITIONS; j++) { | 
 | 					STps = &(STp->ps[j]); | 
 | 					STps->rw = ST_IDLE; | 
 | 					STps->eof = ST_NOEOF; | 
 | 					STps->at_sm = 0; | 
 | 					STps->last_block_valid = 0; | 
 | 					STps->drv_block = 0; | 
 | 					STps->drv_file = 0 ; | 
 | 				} | 
 | 				new_session = 1; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0))		/* FIXME - not allowed with NOBLOCK */ | 
 | 		 printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name); | 
 |  | 
 | 	if ((STp->buffer)->syscall_result != 0) { | 
 | 		if ((STp->device)->scsi_level >= SCSI_2 && | 
 | 		    (SRpnt->sense[0] & 0x70) == 0x70 && | 
 | 		    (SRpnt->sense[2] & 0x0f) == NOT_READY && | 
 | 		     SRpnt->sense[12] == 0x3a) { /* Check ASC */ | 
 | 			STp->ready = ST_NO_TAPE; | 
 | 		} else | 
 | 			STp->ready = ST_NOT_READY; | 
 | 		osst_release_request(SRpnt); | 
 | 		SRpnt = NULL; | 
 | 		STp->density = 0;   	/* Clear the erroneous "residue" */ | 
 | 		STp->write_prot = 0; | 
 | 		STp->block_size = 0; | 
 | 		STp->ps[0].drv_file = STp->ps[0].drv_block = (-1); | 
 | 		STp->partition = STp->new_partition = 0; | 
 | 		STp->door_locked = ST_UNLOCKED; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	osst_configure_onstream(STp, &SRpnt); | 
 |  | 
 | 	STp->block_size = STp->raw ? OS_FRAME_SIZE : ( | 
 | 			     (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE); | 
 | 	STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size; | 
 | 	STp->buffer->buffer_bytes  = | 
 | 	STp->buffer->read_pointer  = | 
 | 	STp->frame_in_buffer       = 0; | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging) | 
 | 		printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n", | 
 | 		     name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size, | 
 | 		     (STp->buffer)->buffer_blocks); | 
 | #endif | 
 |  | 
 | 	if (STp->drv_write_prot) { | 
 | 		STp->write_prot = 1; | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Write protected\n", name); | 
 | #endif | 
 | 		if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) { | 
 | 			retval = (-EROFS); | 
 | 			goto err_out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (new_session) {  /* Change the drive parameters for the new mode */ | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 	printk(OSST_DEB_MSG "%s:D: New Session\n", name); | 
 | #endif | 
 | 		STp->density_changed = STp->blksize_changed = 0; | 
 | 		STp->compression_changed = 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * properly position the tape and check the ADR headers | 
 | 	 */ | 
 | 	if (STp->door_locked == ST_UNLOCKED) { | 
 | 		 if (do_door_lock(STp, 1)) | 
 | 			printk(KERN_INFO "%s:I: Can't lock drive door\n", name); | 
 | 		 else | 
 | 			STp->door_locked = ST_LOCKED_AUTO; | 
 | 	} | 
 |  | 
 | 	osst_analyze_headers(STp, &SRpnt); | 
 |  | 
 | 	osst_release_request(SRpnt); | 
 | 	SRpnt = NULL; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out: | 
 | 	if (SRpnt != NULL) | 
 | 		osst_release_request(SRpnt); | 
 | 	normalize_buffer(STp->buffer); | 
 | 	STp->header_ok = 0; | 
 | 	STp->in_use = 0; | 
 | 	scsi_device_put(STp->device); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* BKL pushdown: spaghetti avoidance wrapper */ | 
 | static int os_scsi_tape_open(struct inode * inode, struct file * filp) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&osst_int_mutex); | 
 | 	ret = __os_scsi_tape_open(inode, filp); | 
 | 	mutex_unlock(&osst_int_mutex); | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* Flush the tape buffer before close */ | 
 | static int os_scsi_tape_flush(struct file * filp, fl_owner_t id) | 
 | { | 
 | 	int		      result = 0, result2; | 
 | 	struct osst_tape    * STp    = filp->private_data; | 
 | 	struct st_modedef   * STm    = &(STp->modes[STp->current_mode]); | 
 | 	struct st_partstat  * STps   = &(STp->ps[STp->partition]); | 
 | 	struct osst_request * SRpnt  = NULL; | 
 | 	char		    * name   = tape_name(STp); | 
 |  | 
 | 	if (file_count(filp) > 1) | 
 | 		return 0; | 
 |  | 
 | 	if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) { | 
 | 		STp->write_type = OS_WRITE_DATA; | 
 | 		result = osst_flush_write_buffer(STp, &SRpnt); | 
 | 		if (result != 0 && result != (-ENOSPC)) | 
 | 			goto out; | 
 | 	} | 
 | 	if ( STps->rw >= ST_WRITING && !STp->pos_unknown) { | 
 |  | 
 | #if DEBUG | 
 | 		if (debugging) { | 
 | 			printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n", | 
 | 					       name, (long)(filp->f_pos)); | 
 | 			printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n", | 
 | 					       name, STp->nbr_waits, STp->nbr_finished); | 
 | 		} | 
 | #endif | 
 | 		result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close)); | 
 | #if DEBUG | 
 | 		if (debugging) | 
 | 			printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n", | 
 | 					       name, 1+STp->two_fm); | 
 | #endif | 
 | 	} | 
 | 	else if (!STp->rew_at_close) { | 
 | 		STps = &(STp->ps[STp->partition]); | 
 | 		if (!STm->sysv || STps->rw != ST_READING) { | 
 | 			if (STp->can_bsr) | 
 | 				result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */ | 
 | 			else if (STps->eof == ST_FM_HIT) { | 
 | 				result = cross_eof(STp, &SRpnt, 0); | 
 | 					if (result) { | 
 | 						if (STps->drv_file >= 0) | 
 | 							STps->drv_file++; | 
 | 						STps->drv_block = 0; | 
 | 						STps->eof = ST_FM; | 
 | 					} | 
 | 					else | 
 | 						STps->eof = ST_NOEOF; | 
 | 			} | 
 | 		} | 
 | 		else if ((STps->eof == ST_NOEOF && | 
 | 			  !(result = cross_eof(STp, &SRpnt, 1))) || | 
 | 			 STps->eof == ST_FM_HIT) { | 
 | 			if (STps->drv_file >= 0) | 
 | 				STps->drv_file++; | 
 | 			STps->drv_block = 0; | 
 | 			STps->eof = ST_FM; | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	if (STp->rew_at_close) { | 
 | 		result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos); | 
 | 		STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0; | 
 | 		if (result == 0 && result2 < 0) | 
 | 			result = result2; | 
 | 	} | 
 | 	if (SRpnt) osst_release_request(SRpnt); | 
 |  | 
 | 	if (STp->abort_count || STp->recover_count) { | 
 | 		printk(KERN_INFO "%s:I:", name); | 
 | 		if (STp->abort_count) | 
 | 			printk(" %d unrecovered errors", STp->abort_count); | 
 | 		if (STp->recover_count) | 
 | 			printk(" %d recovered errors", STp->recover_count); | 
 | 		if (STp->write_count) | 
 | 			printk(" in %d frames written", STp->write_count); | 
 | 		if (STp->read_count) | 
 | 			printk(" in %d frames read", STp->read_count); | 
 | 		printk("\n"); | 
 | 		STp->recover_count = 0; | 
 | 		STp->abort_count   = 0; | 
 | 	} | 
 | 	STp->write_count = 0; | 
 | 	STp->read_count  = 0; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 |  | 
 | /* Close the device and release it */ | 
 | static int os_scsi_tape_close(struct inode * inode, struct file * filp) | 
 | { | 
 | 	int		      result = 0; | 
 | 	struct osst_tape    * STp    = filp->private_data; | 
 |  | 
 | 	if (STp->door_locked == ST_LOCKED_AUTO) | 
 | 		do_door_lock(STp, 0); | 
 |  | 
 | 	if (STp->raw) | 
 | 		STp->header_ok = 0; | 
 | 	 | 
 | 	normalize_buffer(STp->buffer); | 
 | 	write_lock(&os_scsi_tapes_lock); | 
 | 	STp->in_use = 0; | 
 | 	write_unlock(&os_scsi_tapes_lock); | 
 |  | 
 | 	scsi_device_put(STp->device); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 |  | 
 | /* The ioctl command */ | 
 | static long osst_ioctl(struct file * file, | 
 | 	 unsigned int cmd_in, unsigned long arg) | 
 | { | 
 | 	int		      i, cmd_nr, cmd_type, blk, retval = 0; | 
 | 	struct st_modedef   * STm; | 
 | 	struct st_partstat  * STps; | 
 | 	struct osst_request * SRpnt = NULL; | 
 | 	struct osst_tape    * STp   = file->private_data; | 
 | 	char		    * name  = tape_name(STp); | 
 | 	void	    __user  * p     = (void __user *)arg; | 
 |  | 
 | 	mutex_lock(&osst_int_mutex); | 
 | 	if (mutex_lock_interruptible(&STp->lock)) { | 
 | 		mutex_unlock(&osst_int_mutex); | 
 | 		return -ERESTARTSYS; | 
 | 	} | 
 |  | 
 | #if DEBUG | 
 | 	if (debugging && !STp->in_use) { | 
 | 		printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name); | 
 | 		retval = (-EIO); | 
 | 		goto out; | 
 | 	} | 
 | #endif | 
 | 	STm = &(STp->modes[STp->current_mode]); | 
 | 	STps = &(STp->ps[STp->partition]); | 
 |  | 
 | 	/* | 
 | 	 * If we are in the middle of error recovery, don't let anyone | 
 | 	 * else try and use this device.  Also, if error recovery fails, it | 
 | 	 * may try and take the device offline, in which case all further | 
 | 	 * access to the device is prohibited. | 
 | 	 */ | 
 | 	retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in, | 
 | 			file->f_flags & O_NDELAY); | 
 | 	if (retval) | 
 | 		goto out; | 
 |  | 
 | 	cmd_type = _IOC_TYPE(cmd_in); | 
 | 	cmd_nr   = _IOC_NR(cmd_in); | 
 | #if DEBUG | 
 | 	printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name, | 
 | 			    cmd_type, cmd_nr, STp->raw?"raw":"normal"); | 
 | #endif | 
 | 	if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) { | 
 | 		struct mtop mtc; | 
 | 		int    auto_weof = 0; | 
 |  | 
 | 		if (_IOC_SIZE(cmd_in) != sizeof(mtc)) { | 
 | 			retval = (-EINVAL); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		i = copy_from_user((char *) &mtc, p, sizeof(struct mtop)); | 
 | 		if (i) { | 
 | 			retval = (-EFAULT); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) { | 
 | 			printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name); | 
 | 			retval = (-EPERM); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) { | 
 | 			retval = (-ENXIO); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (!STp->pos_unknown) { | 
 |  | 
 | 			if (STps->eof == ST_FM_HIT) { | 
 | 				if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) { | 
 | 					mtc.mt_count -= 1; | 
 | 					if (STps->drv_file >= 0) | 
 | 						STps->drv_file += 1; | 
 | 				} | 
 | 				else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) { | 
 | 					mtc.mt_count += 1; | 
 | 					if (STps->drv_file >= 0) | 
 | 						STps->drv_file += 1; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			if (mtc.mt_op == MTSEEK) { | 
 | 				/* Old position must be restored if partition will be changed */ | 
 | 				i = !STp->can_partitions || (STp->new_partition != STp->partition); | 
 | 			} | 
 | 			else { | 
 | 				i = mtc.mt_op == MTREW   || mtc.mt_op == MTOFFL || | 
 | 				    mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM  || | 
 | 				    mtc.mt_op == MTLOCK  || mtc.mt_op == MTLOAD || | 
 | 				    mtc.mt_op == MTFSF   || mtc.mt_op == MTFSFM || | 
 | 				    mtc.mt_op == MTBSF   || mtc.mt_op == MTBSFM || | 
 | 				    mtc.mt_op == MTCOMPRESSION; | 
 | 			} | 
 | 			i = osst_flush_buffer(STp, &SRpnt, i); | 
 | 			if (i < 0) { | 
 | 				retval = i; | 
 | 				goto out; | 
 | 			} | 
 | 		} | 
 | 		else { | 
 | 			/* | 
 | 			 * If there was a bus reset, block further access | 
 | 			 * to this device.  If the user wants to rewind the tape, | 
 | 			 * then reset the flag and allow access again. | 
 | 			 */ | 
 | 			if(mtc.mt_op != MTREW   && | 
 | 			   mtc.mt_op != MTOFFL  && | 
 | 			   mtc.mt_op != MTRETEN && | 
 | 			   mtc.mt_op != MTERASE && | 
 | 			   mtc.mt_op != MTSEEK  && | 
 | 			   mtc.mt_op != MTEOM)   { | 
 | 				retval = (-EIO); | 
 | 				goto out; | 
 | 			} | 
 | 			reset_state(STp); | 
 | 			/* remove this when the midlevel properly clears was_reset */ | 
 | 			STp->device->was_reset = 0; | 
 | 		} | 
 |  | 
 | 		if (mtc.mt_op != MTCOMPRESSION  && mtc.mt_op != MTLOCK         && | 
 | 		    mtc.mt_op != MTNOP          && mtc.mt_op != MTSETBLK       && | 
 | 		    mtc.mt_op != MTSETDENSITY   && mtc.mt_op != MTSETDRVBUFFER &&  | 
 | 		    mtc.mt_op != MTMKPART       && mtc.mt_op != MTSETPART      && | 
 | 		    mtc.mt_op != MTWEOF         && mtc.mt_op != MTWSM           ) { | 
 |  | 
 | 			/* | 
 | 			 * The user tells us to move to another position on the tape. | 
 | 			 * If we were appending to the tape content, that would leave | 
 | 			 * the tape without proper end, in that case write EOD and | 
 | 			 * update the header to reflect its position. | 
 | 			 */ | 
 | #if DEBUG | 
 | 			printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name, | 
 | 					STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle", | 
 | 					STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number, | 
 | 					STp->logical_blk_num, STps->drv_file, STps->drv_block ); | 
 | #endif | 
 | 			if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) { | 
 | 				auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) && | 
 | 							!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); | 
 | 				i = osst_write_trailer(STp, &SRpnt, | 
 | 							!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL)); | 
 | #if DEBUG | 
 | 				printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", | 
 | 						name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos, | 
 | 						STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block ); | 
 | #endif | 
 | 				if (i < 0) { | 
 | 					retval = i; | 
 | 					goto out; | 
 | 				} | 
 | 			} | 
 | 			STps->rw = ST_IDLE; | 
 | 		} | 
 |  | 
 | 		if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED) | 
 | 			do_door_lock(STp, 0);  /* Ignore result! */ | 
 |  | 
 | 		if (mtc.mt_op == MTSETDRVBUFFER && | 
 | 		   (mtc.mt_count & MT_ST_OPTIONS) != 0) { | 
 | 			retval = osst_set_options(STp, mtc.mt_count); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (mtc.mt_op == MTSETPART) { | 
 | 			if (mtc.mt_count >= STp->nbr_partitions) | 
 | 				retval = -EINVAL; | 
 | 			else { | 
 | 				STp->new_partition = mtc.mt_count; | 
 | 				retval = 0; | 
 | 			} | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (mtc.mt_op == MTMKPART) { | 
 | 			if (!STp->can_partitions) { | 
 | 				retval = (-EINVAL); | 
 | 				goto out; | 
 | 			} | 
 | 			if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*|| | 
 | 			    (i = partition_tape(inode, mtc.mt_count)) < 0*/) { | 
 | 				retval = i; | 
 | 				goto out; | 
 | 			} | 
 | 			for (i=0; i < ST_NBR_PARTITIONS; i++) { | 
 | 				STp->ps[i].rw = ST_IDLE; | 
 | 				STp->ps[i].at_sm = 0; | 
 | 				STp->ps[i].last_block_valid = 0; | 
 | 			} | 
 | 			STp->partition = STp->new_partition = 0; | 
 | 			STp->nbr_partitions = 1;  /* Bad guess ?-) */ | 
 | 			STps->drv_block = STps->drv_file = 0; | 
 | 			retval = 0; | 
 | 			goto out; | 
 | 	 	} | 
 |  | 
 | 		if (mtc.mt_op == MTSEEK) { | 
 | 			if (STp->raw) | 
 | 				i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0); | 
 | 			else | 
 | 				i = osst_seek_sector(STp, &SRpnt, mtc.mt_count); | 
 | 			if (!STp->can_partitions) | 
 | 				STp->ps[0].rw = ST_IDLE; | 
 | 			retval = i; | 
 | 			goto out; | 
 | 		} | 
 |   | 
 | 		if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) { | 
 | 			retval = do_door_lock(STp, (mtc.mt_op == MTLOCK)); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (auto_weof) | 
 | 			cross_eof(STp, &SRpnt, 0); | 
 |  | 
 | 		if (mtc.mt_op == MTCOMPRESSION) | 
 | 			retval = -EINVAL;       /* OnStream drives don't have compression hardware */ | 
 | 		else | 
 | 			/* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS | 
 | 			 * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */ | 
 | 			retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!STm->defined) { | 
 | 		retval = (-ENXIO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) { | 
 | 		retval = i; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) { | 
 | 		struct mtget mt_status; | 
 |  | 
 | 		if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) { | 
 | 			 retval = (-EINVAL); | 
 | 			 goto out; | 
 | 		} | 
 |  | 
 | 		mt_status.mt_type = MT_ISONSTREAM_SC; | 
 | 		mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT; | 
 | 		mt_status.mt_dsreg = | 
 | 			((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) | | 
 | 			((STp->density    << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK); | 
 | 		mt_status.mt_blkno = STps->drv_block; | 
 | 		mt_status.mt_fileno = STps->drv_file; | 
 | 		if (STp->block_size != 0) { | 
 | 			if (STps->rw == ST_WRITING) | 
 | 				mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size; | 
 | 			else if (STps->rw == ST_READING) | 
 | 				mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes + | 
 | 							STp->block_size - 1) / STp->block_size; | 
 | 		} | 
 |  | 
 | 		mt_status.mt_gstat = 0; | 
 | 		if (STp->drv_write_prot) | 
 | 			mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff); | 
 | 		if (mt_status.mt_blkno == 0) { | 
 | 			if (mt_status.mt_fileno == 0) | 
 | 				mt_status.mt_gstat |= GMT_BOT(0xffffffff); | 
 | 			else | 
 | 				mt_status.mt_gstat |= GMT_EOF(0xffffffff); | 
 | 		} | 
 | 		mt_status.mt_resid = STp->partition; | 
 | 		if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR) | 
 | 			mt_status.mt_gstat |= GMT_EOT(0xffffffff); | 
 | 		else if (STps->eof >= ST_EOM_OK) | 
 | 			mt_status.mt_gstat |= GMT_EOD(0xffffffff); | 
 | 		if (STp->density == 1) | 
 | 			mt_status.mt_gstat |= GMT_D_800(0xffffffff); | 
 | 		else if (STp->density == 2) | 
 | 			mt_status.mt_gstat |= GMT_D_1600(0xffffffff); | 
 | 		else if (STp->density == 3) | 
 | 			mt_status.mt_gstat |= GMT_D_6250(0xffffffff); | 
 | 		if (STp->ready == ST_READY) | 
 | 			mt_status.mt_gstat |= GMT_ONLINE(0xffffffff); | 
 | 		if (STp->ready == ST_NO_TAPE) | 
 | 			mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff); | 
 | 		if (STps->at_sm) | 
 | 			mt_status.mt_gstat |= GMT_SM(0xffffffff); | 
 | 		if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) || | 
 | 		    STp->drv_buffer != 0) | 
 | 			mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff); | 
 |  | 
 | 		i = copy_to_user(p, &mt_status, sizeof(struct mtget)); | 
 | 		if (i) { | 
 | 			retval = (-EFAULT); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		STp->recover_erreg = 0;  /* Clear after read */ | 
 | 		retval = 0; | 
 | 		goto out; | 
 | 	} /* End of MTIOCGET */ | 
 |  | 
 | 	if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) { | 
 | 		struct mtpos mt_pos; | 
 |  | 
 | 		if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) { | 
 | 			retval = (-EINVAL); | 
 | 			goto out; | 
 | 		} | 
 | 		if (STp->raw) | 
 | 			blk = osst_get_frame_position(STp, &SRpnt); | 
 | 		else | 
 | 			blk = osst_get_sector(STp, &SRpnt); | 
 | 		if (blk < 0) { | 
 | 			retval = blk; | 
 | 			goto out; | 
 | 		} | 
 | 		mt_pos.mt_blkno = blk; | 
 | 		i = copy_to_user(p, &mt_pos, sizeof(struct mtpos)); | 
 | 		if (i) | 
 | 			retval = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 | 	if (SRpnt) osst_release_request(SRpnt); | 
 |  | 
 | 	mutex_unlock(&STp->lock); | 
 |  | 
 | 	retval = scsi_ioctl(STp->device, cmd_in, p); | 
 | 	mutex_unlock(&osst_int_mutex); | 
 | 	return retval; | 
 |  | 
 | out: | 
 | 	if (SRpnt) osst_release_request(SRpnt); | 
 |  | 
 | 	mutex_unlock(&STp->lock); | 
 | 	mutex_unlock(&osst_int_mutex); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg) | 
 | { | 
 | 	struct osst_tape *STp = file->private_data; | 
 | 	struct scsi_device *sdev = STp->device; | 
 | 	int ret = -ENOIOCTLCMD; | 
 | 	if (sdev->host->hostt->compat_ioctl) { | 
 |  | 
 | 		ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg); | 
 |  | 
 | 	} | 
 | 	return ret; | 
 | } | 
 | #endif | 
 |  | 
 |  | 
 |  | 
 | /* Memory handling routines */ | 
 |  | 
 | /* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ | 
 | static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) | 
 | { | 
 | 	int i; | 
 | 	gfp_t priority; | 
 | 	struct osst_buffer *tb; | 
 |  | 
 | 	if (from_initialization) | 
 | 		priority = GFP_ATOMIC; | 
 | 	else | 
 | 		priority = GFP_KERNEL; | 
 |  | 
 | 	i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist); | 
 | 	tb = kzalloc(i, priority); | 
 | 	if (!tb) { | 
 | 		printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	tb->sg_segs = tb->orig_sg_segs = 0; | 
 | 	tb->use_sg = max_sg; | 
 | 	tb->in_use = 1; | 
 | 	tb->dma = need_dma; | 
 | 	tb->buffer_size = 0; | 
 | #if DEBUG | 
 | 	if (debugging)  | 
 | 		printk(OSST_DEB_MSG | 
 | 			"osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n", | 
 | 			   i, max_sg, need_dma); | 
 | #endif | 
 | 	return tb; | 
 | } | 
 |  | 
 | /* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ | 
 | static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) | 
 | { | 
 | 	int segs, nbr, max_segs, b_size, order, got; | 
 | 	gfp_t priority; | 
 |  | 
 | 	if (STbuffer->buffer_size >= OS_FRAME_SIZE) | 
 | 		return 1; | 
 |  | 
 | 	if (STbuffer->sg_segs) { | 
 | 		printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n"); | 
 | 		normalize_buffer(STbuffer); | 
 | 	} | 
 | 	/* See how many segments we can use -- need at least two */ | 
 | 	nbr = max_segs = STbuffer->use_sg; | 
 | 	if (nbr <= 2) | 
 | 		return 0; | 
 |  | 
 | 	priority = GFP_KERNEL /* | __GFP_NOWARN */; | 
 | 	if (need_dma) | 
 | 		priority |= GFP_DMA; | 
 |  | 
 | 	/* Try to allocate the first segment up to OS_DATA_SIZE and the others | 
 | 	   big enough to reach the goal (code assumes no segments in place) */ | 
 | 	for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) { | 
 | 		struct page *page = alloc_pages(priority, order); | 
 |  | 
 | 		STbuffer->sg[0].offset = 0; | 
 | 		if (page != NULL) { | 
 | 		    sg_set_page(&STbuffer->sg[0], page, b_size, 0); | 
 | 		    STbuffer->b_data = page_address(page); | 
 | 		    break; | 
 | 		} | 
 | 	} | 
 | 	if (sg_page(&STbuffer->sg[0]) == NULL) { | 
 | 		printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n"); | 
 | 		return 0; | 
 | 	} | 
 | 	/* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */ | 
 | 	for (segs=STbuffer->sg_segs=1, got=b_size; | 
 | 	     segs < max_segs && got < OS_FRAME_SIZE; ) { | 
 | 		struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order); | 
 | 		STbuffer->sg[segs].offset = 0; | 
 | 		if (page == NULL) { | 
 | 			printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", | 
 | 						OS_FRAME_SIZE); | 
 | #if DEBUG | 
 | 			STbuffer->buffer_size = got; | 
 | #endif | 
 | 			normalize_buffer(STbuffer); | 
 | 			return 0; | 
 | 		} | 
 | 		sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0); | 
 | 		got += STbuffer->sg[segs].length; | 
 | 		STbuffer->buffer_size = got; | 
 | 		STbuffer->sg_segs = ++segs; | 
 | 	} | 
 | #if DEBUG | 
 | 	if (debugging) { | 
 | 		printk(OSST_DEB_MSG | 
 | 			   "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n", | 
 | 			   got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data); | 
 | 		printk(OSST_DEB_MSG | 
 | 			   "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n", | 
 | 			   STbuffer->sg[0].length, page_address(STbuffer->sg[0].page), | 
 | 			   STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page)); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 |  | 
 | /* Release the segments */ | 
 | static void normalize_buffer(struct osst_buffer *STbuffer) | 
 | { | 
 |   int i, order, b_size; | 
 |  | 
 | 	for (i=0; i < STbuffer->sg_segs; i++) { | 
 |  | 
 | 		for (b_size = PAGE_SIZE, order = 0; | 
 | 		     b_size < STbuffer->sg[i].length; | 
 | 		     b_size *= 2, order++); | 
 |  | 
 | 		__free_pages(sg_page(&STbuffer->sg[i]), order); | 
 | 		STbuffer->buffer_size -= STbuffer->sg[i].length; | 
 | 	} | 
 | #if DEBUG | 
 | 	if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs) | 
 | 		printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n", | 
 | 			     STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs); | 
 | #endif | 
 | 	STbuffer->sg_segs = STbuffer->orig_sg_segs = 0; | 
 | } | 
 |  | 
 |  | 
 | /* Move data from the user buffer to the tape buffer. Returns zero (success) or | 
 |    negative error code. */ | 
 | static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count) | 
 | { | 
 | 	int i, cnt, res, offset; | 
 |  | 
 | 	for (i=0, offset=st_bp->buffer_bytes; | 
 | 	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) | 
 | 		offset -= st_bp->sg[i].length; | 
 | 	if (i == st_bp->sg_segs) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n"); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	for ( ; i < st_bp->sg_segs && do_count > 0; i++) { | 
 | 		cnt = st_bp->sg[i].length - offset < do_count ? | 
 | 		      st_bp->sg[i].length - offset : do_count; | 
 | 		res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt); | 
 | 		if (res) | 
 | 			return (-EFAULT); | 
 | 		do_count -= cnt; | 
 | 		st_bp->buffer_bytes += cnt; | 
 | 		ubp += cnt; | 
 | 		offset = 0; | 
 | 	} | 
 | 	if (do_count) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n", | 
 | 		       do_count); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* Move data from the tape buffer to the user buffer. Returns zero (success) or | 
 |    negative error code. */ | 
 | static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count) | 
 | { | 
 | 	int i, cnt, res, offset; | 
 |  | 
 | 	for (i=0, offset=st_bp->read_pointer; | 
 | 	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) | 
 | 		offset -= st_bp->sg[i].length; | 
 | 	if (i == st_bp->sg_segs) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n"); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	for ( ; i < st_bp->sg_segs && do_count > 0; i++) { | 
 | 		cnt = st_bp->sg[i].length - offset < do_count ? | 
 | 		      st_bp->sg[i].length - offset : do_count; | 
 | 		res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt); | 
 | 		if (res) | 
 | 			return (-EFAULT); | 
 | 		do_count -= cnt; | 
 | 		st_bp->buffer_bytes -= cnt; | 
 | 		st_bp->read_pointer += cnt; | 
 | 		ubp += cnt; | 
 | 		offset = 0; | 
 | 	} | 
 | 	if (do_count) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Sets the tail of the buffer after fill point to zero. | 
 |    Returns zero (success) or negative error code.        */ | 
 | static int osst_zero_buffer_tail(struct osst_buffer *st_bp) | 
 | { | 
 | 	int	i, offset, do_count, cnt; | 
 |  | 
 | 	for (i = 0, offset = st_bp->buffer_bytes; | 
 | 	     i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++) | 
 | 		offset -= st_bp->sg[i].length; | 
 | 	if (i == st_bp->sg_segs) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n"); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes; | 
 | 	     i < st_bp->sg_segs && do_count > 0; i++) { | 
 | 		cnt = st_bp->sg[i].length - offset < do_count ? | 
 | 		      st_bp->sg[i].length - offset : do_count ; | 
 | 		memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt); | 
 | 		do_count -= cnt; | 
 | 		offset = 0; | 
 | 	} | 
 | 	if (do_count) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Copy a osst 32K chunk of memory into the buffer. | 
 |    Returns zero (success) or negative error code.  */ | 
 | static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr) | 
 | { | 
 | 	int	i, cnt, do_count = OS_DATA_SIZE; | 
 |  | 
 | 	for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { | 
 | 		cnt = st_bp->sg[i].length < do_count ? | 
 | 		      st_bp->sg[i].length : do_count ; | 
 | 		memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt); | 
 | 		do_count -= cnt; | 
 | 		ptr      += cnt; | 
 | 	} | 
 | 	if (do_count || i != st_bp->sg_segs-1) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n", | 
 | 					 do_count, i); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Copy a osst 32K chunk of memory from the buffer. | 
 |    Returns zero (success) or negative error code.  */ | 
 | static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr) | 
 | { | 
 | 	int	i, cnt, do_count = OS_DATA_SIZE; | 
 |  | 
 | 	for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) { | 
 | 		cnt = st_bp->sg[i].length < do_count ? | 
 | 		      st_bp->sg[i].length : do_count ; | 
 | 		memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt); | 
 | 		do_count -= cnt; | 
 | 		ptr      += cnt; | 
 | 	} | 
 | 	if (do_count || i != st_bp->sg_segs-1) {  /* Should never happen */ | 
 | 		printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n", | 
 | 					 do_count, i); | 
 | 		return (-EIO); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* Module housekeeping */ | 
 |  | 
 | static void validate_options (void) | 
 | { | 
 |   if (max_dev > 0) | 
 | 		osst_max_dev = max_dev;   | 
 |   if (write_threshold_kbs > 0) | 
 | 		osst_write_threshold = write_threshold_kbs * ST_KILOBYTE; | 
 |   if (osst_write_threshold > osst_buffer_size) | 
 | 		osst_write_threshold = osst_buffer_size; | 
 |   if (max_sg_segs >= OSST_FIRST_SG) | 
 | 		osst_max_sg_segs = max_sg_segs; | 
 | #if DEBUG | 
 |   printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n", | 
 | 			   osst_max_dev, osst_write_threshold, osst_max_sg_segs); | 
 | #endif | 
 | } | 
 | 	 | 
 | #ifndef MODULE | 
 | /* Set the boot options. Syntax: osst=xxx,yyy,... | 
 |    where xxx is write threshold in 1024 byte blocks, | 
 |    and   yyy is number of s/g segments to use. */ | 
 | static int __init osst_setup (char *str) | 
 | { | 
 |   int i, ints[5]; | 
 |   char *stp; | 
 |  | 
 |   stp = get_options(str, ARRAY_SIZE(ints), ints); | 
 |  | 
 |   if (ints[0] > 0) { | 
 | 	for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++) | 
 | 		  *parms[i].val = ints[i + 1]; | 
 |   } else { | 
 | 	while (stp != NULL) { | 
 | 		for (i = 0; i < ARRAY_SIZE(parms); i++) { | 
 | 			int len = strlen(parms[i].name); | 
 | 			if (!strncmp(stp, parms[i].name, len) && | 
 | 			    (*(stp + len) == ':' || *(stp + len) == '=')) { | 
 | 				*parms[i].val = | 
 | 					simple_strtoul(stp + len + 1, NULL, 0); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (i >= ARRAY_SIZE(parms)) | 
 | 			printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n", | 
 | 			       stp); | 
 | 		stp = strchr(stp, ','); | 
 | 		if (stp) | 
 | 			stp++; | 
 | 	} | 
 |   } | 
 |  | 
 |   return 1; | 
 | } | 
 |  | 
 | __setup("osst=", osst_setup); | 
 |  | 
 | #endif | 
 |  | 
 | static const struct file_operations osst_fops = { | 
 | 	.owner =        THIS_MODULE, | 
 | 	.read =         osst_read, | 
 | 	.write =        osst_write, | 
 | 	.unlocked_ioctl = osst_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl = osst_compat_ioctl, | 
 | #endif | 
 | 	.open =         os_scsi_tape_open, | 
 | 	.flush =        os_scsi_tape_flush, | 
 | 	.release =      os_scsi_tape_close, | 
 | 	.llseek =	noop_llseek, | 
 | }; | 
 |  | 
 | static int osst_supports(struct scsi_device * SDp) | 
 | { | 
 | 	struct	osst_support_data { | 
 | 		char *vendor; | 
 | 		char *model; | 
 | 		char *rev; | 
 | 		char *driver_hint; /* Name of the correct driver, NULL if unknown */ | 
 | 	}; | 
 |  | 
 | static	struct	osst_support_data support_list[] = { | 
 | 		/* {"XXX", "Yy-", "", NULL},  example */ | 
 | 		SIGS_FROM_OSST, | 
 | 		{NULL, }}; | 
 |  | 
 | 	struct	osst_support_data *rp; | 
 |  | 
 | 	/* We are willing to drive OnStream SC-x0 as well as the | 
 | 	 * 	 * IDE, ParPort, FireWire, USB variants, if accessible by | 
 | 	 * 	 	 * emulation layer (ide-scsi, usb-storage, ...) */ | 
 |  | 
 | 	for (rp=&(support_list[0]); rp->vendor != NULL; rp++) | 
 | 		if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) && | 
 | 		    !strncmp(rp->model, SDp->model, strlen(rp->model)) && | 
 | 		    !strncmp(rp->rev, SDp->rev, strlen(rp->rev)))  | 
 | 			return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * sysfs support for osst driver parameter information | 
 |  */ | 
 |  | 
 | static ssize_t version_show(struct device_driver *ddd, char *buf) | 
 | { | 
 | 	return snprintf(buf, PAGE_SIZE, "%s\n", osst_version); | 
 | } | 
 |  | 
 | static DRIVER_ATTR_RO(version); | 
 |  | 
 | static int osst_create_sysfs_files(struct device_driver *sysfs) | 
 | { | 
 | 	return driver_create_file(sysfs, &driver_attr_version); | 
 | } | 
 |  | 
 | static void osst_remove_sysfs_files(struct device_driver *sysfs) | 
 | { | 
 | 	driver_remove_file(sysfs, &driver_attr_version); | 
 | } | 
 |  | 
 | /* | 
 |  * sysfs support for accessing ADR header information | 
 |  */ | 
 |  | 
 | static ssize_t osst_adr_rev_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL); | 
 |  | 
 | static ssize_t osst_linux_media_version_show(struct device *dev, | 
 | 					     struct device_attribute *attr, | 
 | 					     char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL); | 
 |  | 
 | static ssize_t osst_capacity_show(struct device *dev, | 
 | 				  struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL); | 
 |  | 
 | static ssize_t osst_first_data_ppos_show(struct device *dev, | 
 | 					 struct device_attribute *attr, | 
 | 					 char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL); | 
 |  | 
 | static ssize_t osst_eod_frame_ppos_show(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL); | 
 |  | 
 | static ssize_t osst_filemark_cnt_show(struct device *dev, | 
 | 				      struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev); | 
 | 	ssize_t l = 0; | 
 |  | 
 | 	if (STp && STp->header_ok && STp->linux_media) | 
 | 		l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt); | 
 | 	return l; | 
 | } | 
 |  | 
 | DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL); | 
 |  | 
 | static struct class *osst_sysfs_class; | 
 |  | 
 | static int osst_sysfs_init(void) | 
 | { | 
 | 	osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape"); | 
 | 	if (IS_ERR(osst_sysfs_class)) { | 
 | 		printk(KERN_ERR "osst :W: Unable to register sysfs class\n"); | 
 | 		return PTR_ERR(osst_sysfs_class); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void osst_sysfs_destroy(dev_t dev) | 
 | { | 
 | 	device_destroy(osst_sysfs_class, dev); | 
 | } | 
 |  | 
 | static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name) | 
 | { | 
 | 	struct device *osst_member; | 
 | 	int err; | 
 |  | 
 | 	osst_member = device_create(osst_sysfs_class, device, dev, STp, | 
 | 				    "%s", name); | 
 | 	if (IS_ERR(osst_member)) { | 
 | 		printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); | 
 | 		return PTR_ERR(osst_member); | 
 | 	} | 
 |  | 
 | 	err = device_create_file(osst_member, &dev_attr_ADR_rev); | 
 | 	if (err) | 
 | 		goto err_out; | 
 | 	err = device_create_file(osst_member, &dev_attr_media_version); | 
 | 	if (err) | 
 | 		goto err_out; | 
 | 	err = device_create_file(osst_member, &dev_attr_capacity); | 
 | 	if (err) | 
 | 		goto err_out; | 
 | 	err = device_create_file(osst_member, &dev_attr_BOT_frame); | 
 | 	if (err) | 
 | 		goto err_out; | 
 | 	err = device_create_file(osst_member, &dev_attr_EOD_frame); | 
 | 	if (err) | 
 | 		goto err_out; | 
 | 	err = device_create_file(osst_member, &dev_attr_file_count); | 
 | 	if (err) | 
 | 		goto err_out; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out: | 
 | 	osst_sysfs_destroy(dev); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void osst_sysfs_cleanup(void) | 
 | { | 
 | 	class_destroy(osst_sysfs_class); | 
 | } | 
 |  | 
 | /* | 
 |  * osst startup / cleanup code | 
 |  */ | 
 |  | 
 | static int osst_probe(struct device *dev) | 
 | { | 
 | 	struct scsi_device * SDp = to_scsi_device(dev); | 
 | 	struct osst_tape   * tpnt; | 
 | 	struct st_modedef  * STm; | 
 | 	struct st_partstat * STps; | 
 | 	struct osst_buffer * buffer; | 
 | 	struct gendisk	   * drive; | 
 | 	int		     i, dev_num, err = -ENODEV; | 
 |  | 
 | 	if (SDp->type != TYPE_TAPE || !osst_supports(SDp)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	drive = alloc_disk(1); | 
 | 	if (!drive) { | 
 | 		printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* if this is the first attach, build the infrastructure */ | 
 | 	write_lock(&os_scsi_tapes_lock); | 
 | 	if (os_scsi_tapes == NULL) { | 
 | 		os_scsi_tapes = kmalloc_array(osst_max_dev, | 
 |                                               sizeof(struct osst_tape *), | 
 |                                               GFP_ATOMIC); | 
 | 		if (os_scsi_tapes == NULL) { | 
 | 			write_unlock(&os_scsi_tapes_lock); | 
 | 			printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n"); | 
 | 			goto out_put_disk; | 
 | 		} | 
 | 		for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL; | 
 | 	} | 
 | 	 | 
 | 	if (osst_nr_dev >= osst_max_dev) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | 		printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev); | 
 | 		goto out_put_disk; | 
 | 	} | 
 |  | 
 | 	/* find a free minor number */ | 
 | 	for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++) | 
 | 		; | 
 | 	if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)"); | 
 | 	dev_num = i; | 
 |  | 
 | 	/* allocate a struct osst_tape for this device */ | 
 | 	tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC); | 
 | 	if (!tpnt) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | 		printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n"); | 
 | 		goto out_put_disk; | 
 | 	} | 
 |  | 
 | 	/* allocate a buffer for this device */ | 
 | 	i = SDp->host->sg_tablesize; | 
 | 	if (osst_max_sg_segs < i) | 
 | 		i = osst_max_sg_segs; | 
 | 	buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i); | 
 | 	if (buffer == NULL) { | 
 | 		write_unlock(&os_scsi_tapes_lock); | 
 | 		printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n"); | 
 | 		kfree(tpnt); | 
 | 		goto out_put_disk; | 
 | 	} | 
 | 	os_scsi_tapes[dev_num] = tpnt; | 
 | 	tpnt->buffer = buffer; | 
 | 	tpnt->device = SDp; | 
 | 	drive->private_data = &tpnt->driver; | 
 | 	sprintf(drive->disk_name, "osst%d", dev_num); | 
 | 	tpnt->driver = &osst_template; | 
 | 	tpnt->drive = drive; | 
 | 	tpnt->in_use = 0; | 
 | 	tpnt->capacity = 0xfffff; | 
 | 	tpnt->dirty = 0; | 
 | 	tpnt->drv_buffer = 1;  /* Try buffering if no mode sense */ | 
 | 	tpnt->restr_dma = (SDp->host)->unchecked_isa_dma; | 
 | 	tpnt->density = 0; | 
 | 	tpnt->do_auto_lock = OSST_AUTO_LOCK; | 
 | 	tpnt->can_bsr = OSST_IN_FILE_POS; | 
 | 	tpnt->can_partitions = 0; | 
 | 	tpnt->two_fm = OSST_TWO_FM; | 
 | 	tpnt->fast_mteom = OSST_FAST_MTEOM; | 
 | 	tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */ | 
 | 	tpnt->write_threshold = osst_write_threshold; | 
 | 	tpnt->default_drvbuffer = 0xff; /* No forced buffering */ | 
 | 	tpnt->partition = 0; | 
 | 	tpnt->new_partition = 0; | 
 | 	tpnt->nbr_partitions = 0; | 
 | 	tpnt->min_block = 512; | 
 | 	tpnt->max_block = OS_DATA_SIZE; | 
 | 	tpnt->timeout = OSST_TIMEOUT; | 
 | 	tpnt->long_timeout = OSST_LONG_TIMEOUT; | 
 |  | 
 | 	/* Recognize OnStream tapes */ | 
 | 	/* We don't need to test for OnStream, as this has been done in detect () */ | 
 | 	tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev); | 
 | 	tpnt->omit_blklims = 1; | 
 |  | 
 | 	tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) ||  | 
 | 		     (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp); | 
 | 	tpnt->frame_in_buffer = 0; | 
 | 	tpnt->header_ok = 0; | 
 | 	tpnt->linux_media = 0; | 
 | 	tpnt->header_cache = NULL; | 
 |  | 
 | 	for (i=0; i < ST_NBR_MODES; i++) { | 
 | 		STm = &(tpnt->modes[i]); | 
 | 		STm->defined = 0; | 
 | 		STm->sysv = OSST_SYSV; | 
 | 		STm->defaults_for_writes = 0; | 
 | 		STm->do_async_writes = OSST_ASYNC_WRITES; | 
 | 		STm->do_buffer_writes = OSST_BUFFER_WRITES; | 
 | 		STm->do_read_ahead = OSST_READ_AHEAD; | 
 | 		STm->default_compression = ST_DONT_TOUCH; | 
 | 		STm->default_blksize = 512; | 
 | 		STm->default_density = (-1);  /* No forced density */ | 
 | 	} | 
 |  | 
 | 	for (i=0; i < ST_NBR_PARTITIONS; i++) { | 
 | 		STps = &(tpnt->ps[i]); | 
 | 		STps->rw = ST_IDLE; | 
 | 		STps->eof = ST_NOEOF; | 
 | 		STps->at_sm = 0; | 
 | 		STps->last_block_valid = 0; | 
 | 		STps->drv_block = (-1); | 
 | 		STps->drv_file = (-1); | 
 | 	} | 
 |  | 
 | 	tpnt->current_mode = 0; | 
 | 	tpnt->modes[0].defined = 1; | 
 | 	tpnt->modes[2].defined = 1; | 
 | 	tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0; | 
 |  | 
 | 	mutex_init(&tpnt->lock); | 
 | 	osst_nr_dev++; | 
 | 	write_unlock(&os_scsi_tapes_lock); | 
 |  | 
 | 	{ | 
 | 		char name[8]; | 
 |  | 
 | 		/*  Rewind entry  */ | 
 | 		err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt)); | 
 | 		if (err) | 
 | 			goto out_free_buffer; | 
 |  | 
 | 		/*  No-rewind entry  */ | 
 | 		snprintf(name, 8, "%s%s", "n", tape_name(tpnt)); | 
 | 		err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name); | 
 | 		if (err) | 
 | 			goto out_free_sysfs1; | 
 | 	} | 
 |  | 
 | 	sdev_printk(KERN_INFO, SDp, | 
 | 		"osst :I: Attached OnStream %.5s tape as %s\n", | 
 | 		SDp->model, tape_name(tpnt)); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_free_sysfs1: | 
 | 	osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num)); | 
 | out_free_buffer: | 
 | 	kfree(buffer); | 
 | out_put_disk: | 
 |         put_disk(drive); | 
 |         return err; | 
 | }; | 
 |  | 
 | static int osst_remove(struct device *dev) | 
 | { | 
 | 	struct scsi_device * SDp = to_scsi_device(dev); | 
 | 	struct osst_tape * tpnt; | 
 | 	int i; | 
 |  | 
 | 	if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0)) | 
 | 		return 0; | 
 |  | 
 | 	write_lock(&os_scsi_tapes_lock); | 
 | 	for(i=0; i < osst_max_dev; i++) { | 
 | 		if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) { | 
 | 			osst_sysfs_destroy(MKDEV(OSST_MAJOR, i)); | 
 | 			osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128)); | 
 | 			tpnt->device = NULL; | 
 | 			put_disk(tpnt->drive); | 
 | 			os_scsi_tapes[i] = NULL; | 
 | 			osst_nr_dev--; | 
 | 			write_unlock(&os_scsi_tapes_lock); | 
 | 			vfree(tpnt->header_cache); | 
 | 			if (tpnt->buffer) { | 
 | 				normalize_buffer(tpnt->buffer); | 
 | 				kfree(tpnt->buffer); | 
 | 			} | 
 | 			kfree(tpnt); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | 	write_unlock(&os_scsi_tapes_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init init_osst(void)  | 
 | { | 
 | 	int err; | 
 |  | 
 | 	printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid); | 
 |  | 
 | 	validate_options(); | 
 |  | 
 | 	err = osst_sysfs_init(); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	err = register_chrdev(OSST_MAJOR, "osst", &osst_fops); | 
 | 	if (err < 0) { | 
 | 		printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	err = scsi_register_driver(&osst_template.gendrv); | 
 | 	if (err) | 
 | 		goto err_out_chrdev; | 
 |  | 
 | 	err = osst_create_sysfs_files(&osst_template.gendrv); | 
 | 	if (err) | 
 | 		goto err_out_scsidrv; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out_scsidrv: | 
 | 	scsi_unregister_driver(&osst_template.gendrv); | 
 | err_out_chrdev: | 
 | 	unregister_chrdev(OSST_MAJOR, "osst"); | 
 | err_out: | 
 | 	osst_sysfs_cleanup(); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void __exit exit_osst (void) | 
 | { | 
 | 	int i; | 
 | 	struct osst_tape * STp; | 
 |  | 
 | 	osst_remove_sysfs_files(&osst_template.gendrv); | 
 | 	scsi_unregister_driver(&osst_template.gendrv); | 
 | 	unregister_chrdev(OSST_MAJOR, "osst"); | 
 | 	osst_sysfs_cleanup(); | 
 |  | 
 | 	if (os_scsi_tapes) { | 
 | 		for (i=0; i < osst_max_dev; ++i) { | 
 | 			if (!(STp = os_scsi_tapes[i])) continue; | 
 | 			/* This is defensive, supposed to happen during detach */ | 
 | 			vfree(STp->header_cache); | 
 | 			if (STp->buffer) { | 
 | 				normalize_buffer(STp->buffer); | 
 | 				kfree(STp->buffer); | 
 | 			} | 
 | 			put_disk(STp->drive); | 
 | 			kfree(STp); | 
 | 		} | 
 | 		kfree(os_scsi_tapes); | 
 | 	} | 
 | 	printk(KERN_INFO "osst :I: Unloaded.\n"); | 
 | } | 
 |  | 
 | module_init(init_osst); | 
 | module_exit(exit_osst); |