| |
| What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms |
| Date: May 2010 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Indicates whether the batman protocol messages of the |
| mesh <mesh_iface> shall be aggregated or not. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation |
| Date: May 2011 |
| Contact: Antonio Quartulli <a@unstable.cc> |
| Description: |
| Indicates whether the data traffic going from a |
| wireless client to another wireless client will be |
| silently dropped. <vlan_subdir> is empty when referring |
| to the untagged lan. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/bonding |
| Date: June 2010 |
| Contact: Simon Wunderlich <sw@simonwunderlich.de> |
| Description: |
| Indicates whether the data traffic going through the |
| mesh will be sent using multiple interfaces at the |
| same time (if available). |
| |
| What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance |
| Date: November 2011 |
| Contact: Simon Wunderlich <sw@simonwunderlich.de> |
| Description: |
| Indicates whether the bridge loop avoidance feature |
| is enabled. This feature detects and avoids loops |
| between the mesh and devices bridged with the soft |
| interface <mesh_iface>. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/fragmentation |
| Date: October 2010 |
| Contact: Andreas Langer <an.langer@gmx.de> |
| Description: |
| Indicates whether the data traffic going through the |
| mesh will be fragmented or silently discarded if the |
| packet size exceeds the outgoing interface MTU. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth |
| Date: October 2010 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Defines the bandwidth which is propagated by this |
| node if gw_mode was set to 'server'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_mode |
| Date: October 2010 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Defines the state of the gateway features. Can be |
| either 'off', 'client' or 'server'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class |
| Date: October 2010 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Defines the selection criteria this node will use |
| to choose a gateway if gw_mode was set to 'client'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/hop_penalty |
| Date: Oct 2010 |
| Contact: Linus Lüssing <linus.luessing@web.de> |
| Description: |
| Defines the penalty which will be applied to an |
| originator message's tq-field on every hop. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/isolation_mark |
| Date: Nov 2013 |
| Contact: Antonio Quartulli <a@unstable.cc> |
| Description: |
| Defines the isolation mark (and its bitmask) which |
| is used to classify clients as "isolated" by the |
| Extended Isolation feature. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/multicast_mode |
| Date: Feb 2014 |
| Contact: Linus Lüssing <linus.luessing@web.de> |
| Description: |
| Indicates whether multicast optimizations are enabled |
| or disabled. If set to zero then all nodes in the |
| mesh are going to use classic flooding for any |
| multicast packet with no optimizations. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/network_coding |
| Date: Nov 2012 |
| Contact: Martin Hundeboll <martin@hundeboll.net> |
| Description: |
| Controls whether Network Coding (using some magic |
| to send fewer wifi packets but still the same |
| content) is enabled or not. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/orig_interval |
| Date: May 2010 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Defines the interval in milliseconds in which batman |
| sends its protocol messages. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/routing_algo |
| Date: Dec 2011 |
| Contact: Marek Lindner <mareklindner@neomailbox.ch> |
| Description: |
| Defines the routing procotol this mesh instance |
| uses to find the optimal paths through the mesh. |