| /* | 
 |  * ds1621.c - Part of lm_sensors, Linux kernel modules for hardware | 
 |  *	      monitoring | 
 |  * Christian W. Zuckschwerdt  <zany@triq.net>  2000-11-23 | 
 |  * based on lm75.c by Frodo Looijaard <frodol@dds.nl> | 
 |  * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with | 
 |  * the help of Jean Delvare <jdelvare@suse.de> | 
 |  * | 
 |  * The DS1621 device is a digital temperature/thermometer with 9-bit | 
 |  * resolution, a thermal alarm output (Tout), and user-defined minimum | 
 |  * and maximum temperature thresholds (TH and TL). | 
 |  * | 
 |  * The DS1625, DS1631, DS1721, and DS1731 are pin compatible with the DS1621 | 
 |  * and similar in operation, with slight variations as noted in the device | 
 |  * datasheets (please refer to www.maximintegrated.com for specific | 
 |  * device information). | 
 |  * | 
 |  * Since the DS1621 was the first chipset supported by this driver, | 
 |  * most comments will refer to this chipset, but are actually general | 
 |  * and concern all supported chipsets, unless mentioned otherwise. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/sysfs.h> | 
 | #include <linux/kernel.h> | 
 |  | 
 | /* Supported devices */ | 
 | enum chips { ds1621, ds1625, ds1631, ds1721, ds1731 }; | 
 |  | 
 | /* Insmod parameters */ | 
 | static int polarity = -1; | 
 | module_param(polarity, int, 0); | 
 | MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low"); | 
 |  | 
 | /* | 
 |  * The Configuration/Status register | 
 |  * | 
 |  * - DS1621: | 
 |  *   7    6    5    4    3    2    1    0 | 
 |  * |Done|THF |TLF |NVB | X  | X  |POL |1SHOT| | 
 |  * | 
 |  * - DS1625: | 
 |  *   7    6    5    4    3    2    1    0 | 
 |  * |Done|THF |TLF |NVB | 1  | 0  |POL |1SHOT| | 
 |  * | 
 |  * - DS1631, DS1731: | 
 |  *   7    6    5    4    3    2    1    0 | 
 |  * |Done|THF |TLF |NVB | R1 | R0 |POL |1SHOT| | 
 |  * | 
 |  * - DS1721: | 
 |  *   7    6    5    4    3    2    1    0 | 
 |  * |Done| X  | X  | U  | R1 | R0 |POL |1SHOT| | 
 |  * | 
 |  * Where: | 
 |  * - 'X' is Reserved | 
 |  * - 'U' is Undefined | 
 |  */ | 
 | #define DS1621_REG_CONFIG_NVB		0x10 | 
 | #define DS1621_REG_CONFIG_RESOL		0x0C | 
 | #define DS1621_REG_CONFIG_POLARITY	0x02 | 
 | #define DS1621_REG_CONFIG_1SHOT		0x01 | 
 | #define DS1621_REG_CONFIG_DONE		0x80 | 
 |  | 
 | #define DS1621_REG_CONFIG_RESOL_SHIFT	2 | 
 |  | 
 | /* ds1721 conversion rates: {C/LSB, time(ms), resolution bit setting} */ | 
 | static const unsigned short ds1721_convrates[] = { | 
 | 	94,	/*  9-bits (0.5,  93.75, RES[0..1] = 0 */ | 
 | 	188,	/* 10-bits (0.25, 187.5, RES[0..1] = 1 */ | 
 | 	375,	/* 11-bits (0.125,  375, RES[0..1] = 2 */ | 
 | 	750,	/* 12-bits (0.0625, 750, RES[0..1] = 3 */ | 
 | }; | 
 |  | 
 | #define DS1621_CONVERSION_MAX	750 | 
 | #define DS1625_CONVERSION_MAX	500 | 
 |  | 
 | #define DS1621_TEMP_MAX	125000 | 
 | #define DS1621_TEMP_MIN	(-55000) | 
 |  | 
 | /* The DS1621 temperature registers */ | 
 | static const u8 DS1621_REG_TEMP[3] = { | 
 | 	0xAA,		/* input, word, RO */ | 
 | 	0xA2,		/* min, word, RW */ | 
 | 	0xA1,		/* max, word, RW */ | 
 | }; | 
 | #define DS1621_REG_CONF			0xAC /* byte, RW */ | 
 | #define DS1621_COM_START		0xEE /* no data */ | 
 | #define DS1721_COM_START		0x51 /* no data */ | 
 | #define DS1621_COM_STOP			0x22 /* no data */ | 
 |  | 
 | /* The DS1621 configuration register */ | 
 | #define DS1621_ALARM_TEMP_HIGH		0x40 | 
 | #define DS1621_ALARM_TEMP_LOW		0x20 | 
 |  | 
 | /* Conversions */ | 
 | #define ALARMS_FROM_REG(val) ((val) & \ | 
 | 			(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) | 
 |  | 
 | /* Each client has this additional data */ | 
 | struct ds1621_data { | 
 | 	struct i2c_client *client; | 
 | 	struct mutex update_lock; | 
 | 	char valid;			/* !=0 if following fields are valid */ | 
 | 	unsigned long last_updated;	/* In jiffies */ | 
 | 	enum chips kind;		/* device type */ | 
 |  | 
 | 	u16 temp[3];			/* Register values, word */ | 
 | 	u8 conf;			/* Register encoding, combined */ | 
 | 	u8 zbits;			/* Resolution encoded as number of | 
 | 					 * zero bits */ | 
 | 	u16 update_interval;		/* Conversion rate in milliseconds */ | 
 | }; | 
 |  | 
 | static inline int DS1621_TEMP_FROM_REG(u16 reg) | 
 | { | 
 | 	return DIV_ROUND_CLOSEST(((s16)reg / 16) * 625, 10); | 
 | } | 
 |  | 
 | /* | 
 |  * TEMP: 0.001C/bit (-55C to +125C) | 
 |  * REG: | 
 |  *  - 1621, 1625: 0.5C/bit, 7 zero-bits | 
 |  *  - 1631, 1721, 1731: 0.0625C/bit, 4 zero-bits | 
 |  */ | 
 | static inline u16 DS1621_TEMP_TO_REG(long temp, u8 zbits) | 
 | { | 
 | 	temp = clamp_val(temp, DS1621_TEMP_MIN, DS1621_TEMP_MAX); | 
 | 	temp = DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits; | 
 | 	return temp; | 
 | } | 
 |  | 
 | static void ds1621_init_client(struct ds1621_data *data, | 
 | 			       struct i2c_client *client) | 
 | { | 
 | 	u8 conf, new_conf, sreg, resol; | 
 |  | 
 | 	new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | 
 | 	/* switch to continuous conversion mode */ | 
 | 	new_conf &= ~DS1621_REG_CONFIG_1SHOT; | 
 |  | 
 | 	/* setup output polarity */ | 
 | 	if (polarity == 0) | 
 | 		new_conf &= ~DS1621_REG_CONFIG_POLARITY; | 
 | 	else if (polarity == 1) | 
 | 		new_conf |= DS1621_REG_CONFIG_POLARITY; | 
 |  | 
 | 	if (conf != new_conf) | 
 | 		i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf); | 
 |  | 
 | 	switch (data->kind) { | 
 | 	case ds1625: | 
 | 		data->update_interval = DS1625_CONVERSION_MAX; | 
 | 		data->zbits = 7; | 
 | 		sreg = DS1621_COM_START; | 
 | 		break; | 
 | 	case ds1631: | 
 | 	case ds1721: | 
 | 	case ds1731: | 
 | 		resol = (new_conf & DS1621_REG_CONFIG_RESOL) >> | 
 | 			 DS1621_REG_CONFIG_RESOL_SHIFT; | 
 | 		data->update_interval = ds1721_convrates[resol]; | 
 | 		data->zbits = 7 - resol; | 
 | 		sreg = DS1721_COM_START; | 
 | 		break; | 
 | 	default: | 
 | 		data->update_interval = DS1621_CONVERSION_MAX; | 
 | 		data->zbits = 7; | 
 | 		sreg = DS1621_COM_START; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* start conversion */ | 
 | 	i2c_smbus_write_byte(client, sreg); | 
 | } | 
 |  | 
 | static struct ds1621_data *ds1621_update_client(struct device *dev) | 
 | { | 
 | 	struct ds1621_data *data = dev_get_drvdata(dev); | 
 | 	struct i2c_client *client = data->client; | 
 | 	u8 new_conf; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (time_after(jiffies, data->last_updated + data->update_interval) || | 
 | 	    !data->valid) { | 
 | 		int i; | 
 |  | 
 | 		dev_dbg(&client->dev, "Starting ds1621 update\n"); | 
 |  | 
 | 		data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | 
 |  | 
 | 		for (i = 0; i < ARRAY_SIZE(data->temp); i++) | 
 | 			data->temp[i] = i2c_smbus_read_word_swapped(client, | 
 | 							 DS1621_REG_TEMP[i]); | 
 |  | 
 | 		/* reset alarms if necessary */ | 
 | 		new_conf = data->conf; | 
 | 		if (data->temp[0] > data->temp[1])	/* input > min */ | 
 | 			new_conf &= ~DS1621_ALARM_TEMP_LOW; | 
 | 		if (data->temp[0] < data->temp[2])	/* input < max */ | 
 | 			new_conf &= ~DS1621_ALARM_TEMP_HIGH; | 
 | 		if (data->conf != new_conf) | 
 | 			i2c_smbus_write_byte_data(client, DS1621_REG_CONF, | 
 | 						  new_conf); | 
 |  | 
 | 		data->last_updated = jiffies; | 
 | 		data->valid = 1; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return data; | 
 | } | 
 |  | 
 | static ssize_t show_temp(struct device *dev, struct device_attribute *da, | 
 | 			 char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
 | 	struct ds1621_data *data = ds1621_update_client(dev); | 
 | 	return sprintf(buf, "%d\n", | 
 | 		       DS1621_TEMP_FROM_REG(data->temp[attr->index])); | 
 | } | 
 |  | 
 | static ssize_t set_temp(struct device *dev, struct device_attribute *da, | 
 | 			const char *buf, size_t count) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
 | 	struct ds1621_data *data = dev_get_drvdata(dev); | 
 | 	long val; | 
 | 	int err; | 
 |  | 
 | 	err = kstrtol(buf, 10, &val); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 | 	data->temp[attr->index] = DS1621_TEMP_TO_REG(val, data->zbits); | 
 | 	i2c_smbus_write_word_swapped(data->client, DS1621_REG_TEMP[attr->index], | 
 | 				     data->temp[attr->index]); | 
 | 	mutex_unlock(&data->update_lock); | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t alarms_show(struct device *dev, struct device_attribute *da, | 
 | 			   char *buf) | 
 | { | 
 | 	struct ds1621_data *data = ds1621_update_client(dev); | 
 | 	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); | 
 | } | 
 |  | 
 | static ssize_t show_alarm(struct device *dev, struct device_attribute *da, | 
 | 			  char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
 | 	struct ds1621_data *data = ds1621_update_client(dev); | 
 | 	return sprintf(buf, "%d\n", !!(data->conf & attr->index)); | 
 | } | 
 |  | 
 | static ssize_t update_interval_show(struct device *dev, | 
 | 				    struct device_attribute *da, char *buf) | 
 | { | 
 | 	struct ds1621_data *data = dev_get_drvdata(dev); | 
 | 	return scnprintf(buf, PAGE_SIZE, "%hu\n", data->update_interval); | 
 | } | 
 |  | 
 | static ssize_t update_interval_store(struct device *dev, | 
 | 				     struct device_attribute *da, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	struct ds1621_data *data = dev_get_drvdata(dev); | 
 | 	struct i2c_client *client = data->client; | 
 | 	unsigned long convrate; | 
 | 	s32 err; | 
 | 	int resol = 0; | 
 |  | 
 | 	err = kstrtoul(buf, 10, &convrate); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* Convert rate into resolution bits */ | 
 | 	while (resol < (ARRAY_SIZE(ds1721_convrates) - 1) && | 
 | 	       convrate > ds1721_convrates[resol]) | 
 | 		resol++; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 | 	data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); | 
 | 	data->conf &= ~DS1621_REG_CONFIG_RESOL; | 
 | 	data->conf |= (resol << DS1621_REG_CONFIG_RESOL_SHIFT); | 
 | 	i2c_smbus_write_byte_data(client, DS1621_REG_CONF, data->conf); | 
 | 	data->update_interval = ds1721_convrates[resol]; | 
 | 	data->zbits = 7 - resol; | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RO(alarms); | 
 | static DEVICE_ATTR_RW(update_interval); | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | 
 | static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1); | 
 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); | 
 | static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, | 
 | 		DS1621_ALARM_TEMP_LOW); | 
 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, | 
 | 		DS1621_ALARM_TEMP_HIGH); | 
 |  | 
 | static struct attribute *ds1621_attributes[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_min.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | 
 | 	&dev_attr_alarms.attr, | 
 | 	&dev_attr_update_interval.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static umode_t ds1621_attribute_visible(struct kobject *kobj, | 
 | 					struct attribute *attr, int index) | 
 | { | 
 | 	struct device *dev = container_of(kobj, struct device, kobj); | 
 | 	struct ds1621_data *data = dev_get_drvdata(dev); | 
 |  | 
 | 	if (attr == &dev_attr_update_interval.attr) | 
 | 		if (data->kind == ds1621 || data->kind == ds1625) | 
 | 			/* shhh, we're hiding update_interval */ | 
 | 			return 0; | 
 | 	return attr->mode; | 
 | } | 
 |  | 
 | static const struct attribute_group ds1621_group = { | 
 | 	.attrs = ds1621_attributes, | 
 | 	.is_visible = ds1621_attribute_visible | 
 | }; | 
 | __ATTRIBUTE_GROUPS(ds1621); | 
 |  | 
 | static int ds1621_probe(struct i2c_client *client, | 
 | 			const struct i2c_device_id *id) | 
 | { | 
 | 	struct ds1621_data *data; | 
 | 	struct device *hwmon_dev; | 
 |  | 
 | 	data = devm_kzalloc(&client->dev, sizeof(struct ds1621_data), | 
 | 			    GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_init(&data->update_lock); | 
 |  | 
 | 	data->kind = id->driver_data; | 
 | 	data->client = client; | 
 |  | 
 | 	/* Initialize the DS1621 chip */ | 
 | 	ds1621_init_client(data, client); | 
 |  | 
 | 	hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, | 
 | 							   client->name, data, | 
 | 							   ds1621_groups); | 
 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | } | 
 |  | 
 | static const struct i2c_device_id ds1621_id[] = { | 
 | 	{ "ds1621", ds1621 }, | 
 | 	{ "ds1625", ds1625 }, | 
 | 	{ "ds1631", ds1631 }, | 
 | 	{ "ds1721", ds1721 }, | 
 | 	{ "ds1731", ds1731 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, ds1621_id); | 
 |  | 
 | /* This is the driver that will be inserted */ | 
 | static struct i2c_driver ds1621_driver = { | 
 | 	.class		= I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= "ds1621", | 
 | 	}, | 
 | 	.probe		= ds1621_probe, | 
 | 	.id_table	= ds1621_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(ds1621_driver); | 
 |  | 
 | MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>"); | 
 | MODULE_DESCRIPTION("DS1621 driver"); | 
 | MODULE_LICENSE("GPL"); |