| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * USB Host Controller Driver for IMX21 | 
 |  * | 
 |  * Copyright (C) 2006 Loping Dog Embedded Systems | 
 |  * Copyright (C) 2009 Martin Fuzzey | 
 |  * Originally written by Jay Monkman <jtm@lopingdog.com> | 
 |  * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey | 
 |  */ | 
 |  | 
 |  | 
 |  /* | 
 |   * The i.MX21 USB hardware contains | 
 |   *    * 32 transfer descriptors (called ETDs) | 
 |   *    * 4Kb of Data memory | 
 |   * | 
 |   * The data memory is shared between the host and function controllers | 
 |   * (but this driver only supports the host controller) | 
 |   * | 
 |   * So setting up a transfer involves: | 
 |   *    * Allocating a ETD | 
 |   *    * Fill in ETD with appropriate information | 
 |   *    * Allocating data memory (and putting the offset in the ETD) | 
 |   *    * Activate the ETD | 
 |   *    * Get interrupt when done. | 
 |   * | 
 |   * An ETD is assigned to each active endpoint. | 
 |   * | 
 |   * Low resource (ETD and Data memory) situations are handled differently for | 
 |   * isochronous and non insosynchronous transactions : | 
 |   * | 
 |   * Non ISOC transfers are queued if either ETDs or Data memory are unavailable | 
 |   * | 
 |   * ISOC transfers use 2 ETDs per endpoint to achieve double buffering. | 
 |   * They allocate both ETDs and Data memory during URB submission | 
 |   * (and fail if unavailable). | 
 |   */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/list.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/hcd.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include "imx21-hcd.h" | 
 |  | 
 | #ifdef CONFIG_DYNAMIC_DEBUG | 
 | #define DEBUG | 
 | #endif | 
 |  | 
 | #ifdef DEBUG | 
 | #define DEBUG_LOG_FRAME(imx21, etd, event) \ | 
 | 	(etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB) | 
 | #else | 
 | #define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0) | 
 | #endif | 
 |  | 
 | static const char hcd_name[] = "imx21-hcd"; | 
 |  | 
 | static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd) | 
 | { | 
 | 	return (struct imx21 *)hcd->hcd_priv; | 
 | } | 
 |  | 
 |  | 
 | /* =========================================== */ | 
 | /* Hardware access helpers			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask) | 
 | { | 
 | 	void __iomem *reg = imx21->regs + offset; | 
 | 	writel(readl(reg) | mask, reg); | 
 | } | 
 |  | 
 | static inline void clear_register_bits(struct imx21 *imx21, | 
 | 	u32 offset, u32 mask) | 
 | { | 
 | 	void __iomem *reg = imx21->regs + offset; | 
 | 	writel(readl(reg) & ~mask, reg); | 
 | } | 
 |  | 
 | static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) | 
 | { | 
 | 	void __iomem *reg = imx21->regs + offset; | 
 |  | 
 | 	if (readl(reg) & mask) | 
 | 		writel(mask, reg); | 
 | } | 
 |  | 
 | static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) | 
 | { | 
 | 	void __iomem *reg = imx21->regs + offset; | 
 |  | 
 | 	if (!(readl(reg) & mask)) | 
 | 		writel(mask, reg); | 
 | } | 
 |  | 
 | static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value) | 
 | { | 
 | 	writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword)); | 
 | } | 
 |  | 
 | static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword) | 
 | { | 
 | 	return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword)); | 
 | } | 
 |  | 
 | static inline int wrap_frame(int counter) | 
 | { | 
 | 	return counter & 0xFFFF; | 
 | } | 
 |  | 
 | static inline int frame_after(int frame, int after) | 
 | { | 
 | 	/* handle wrapping like jiffies time_afer */ | 
 | 	return (s16)((s16)after - (s16)frame) < 0; | 
 | } | 
 |  | 
 | static int imx21_hc_get_frame(struct usb_hcd *hcd) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 |  | 
 | 	return wrap_frame(readl(imx21->regs + USBH_FRMNUB)); | 
 | } | 
 |  | 
 | static inline bool unsuitable_for_dma(dma_addr_t addr) | 
 | { | 
 | 	return (addr & 3) != 0; | 
 | } | 
 |  | 
 | #include "imx21-dbg.c" | 
 |  | 
 | static void nonisoc_urb_completed_for_etd( | 
 | 	struct imx21 *imx21, struct etd_priv *etd, int status); | 
 | static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb); | 
 | static void free_dmem(struct imx21 *imx21, struct etd_priv *etd); | 
 |  | 
 | /* =========================================== */ | 
 | /* ETD management				*/ | 
 | /* ===========================================	*/ | 
 |  | 
 | static int alloc_etd(struct imx21 *imx21) | 
 | { | 
 | 	int i; | 
 | 	struct etd_priv *etd = imx21->etd; | 
 |  | 
 | 	for (i = 0; i < USB_NUM_ETD; i++, etd++) { | 
 | 		if (etd->alloc == 0) { | 
 | 			memset(etd, 0, sizeof(imx21->etd[0])); | 
 | 			etd->alloc = 1; | 
 | 			debug_etd_allocated(imx21); | 
 | 			return i; | 
 | 		} | 
 | 	} | 
 | 	return -1; | 
 | } | 
 |  | 
 | static void disactivate_etd(struct imx21 *imx21, int num) | 
 | { | 
 | 	int etd_mask = (1 << num); | 
 | 	struct etd_priv *etd = &imx21->etd[num]; | 
 |  | 
 | 	writel(etd_mask, imx21->regs + USBH_ETDENCLR); | 
 | 	clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask); | 
 | 	writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR); | 
 | 	clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); | 
 |  | 
 | 	etd->active_count = 0; | 
 |  | 
 | 	DEBUG_LOG_FRAME(imx21, etd, disactivated); | 
 | } | 
 |  | 
 | static void reset_etd(struct imx21 *imx21, int num) | 
 | { | 
 | 	struct etd_priv *etd = imx21->etd + num; | 
 | 	int i; | 
 |  | 
 | 	disactivate_etd(imx21, num); | 
 |  | 
 | 	for (i = 0; i < 4; i++) | 
 | 		etd_writel(imx21, num, i, 0); | 
 | 	etd->urb = NULL; | 
 | 	etd->ep = NULL; | 
 | 	etd->td = NULL; | 
 | 	etd->bounce_buffer = NULL; | 
 | } | 
 |  | 
 | static void free_etd(struct imx21 *imx21, int num) | 
 | { | 
 | 	if (num < 0) | 
 | 		return; | 
 |  | 
 | 	if (num >= USB_NUM_ETD) { | 
 | 		dev_err(imx21->dev, "BAD etd=%d!\n", num); | 
 | 		return; | 
 | 	} | 
 | 	if (imx21->etd[num].alloc == 0) { | 
 | 		dev_err(imx21->dev, "ETD %d already free!\n", num); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	debug_etd_freed(imx21); | 
 | 	reset_etd(imx21, num); | 
 | 	memset(&imx21->etd[num], 0, sizeof(imx21->etd[0])); | 
 | } | 
 |  | 
 |  | 
 | static void setup_etd_dword0(struct imx21 *imx21, | 
 | 	int etd_num, struct urb *urb,  u8 dir, u16 maxpacket) | 
 | { | 
 | 	etd_writel(imx21, etd_num, 0, | 
 | 		((u32) usb_pipedevice(urb->pipe)) <<  DW0_ADDRESS | | 
 | 		((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) | | 
 | 		((u32) dir << DW0_DIRECT) | | 
 | 		((u32) ((urb->dev->speed == USB_SPEED_LOW) ? | 
 | 			1 : 0) << DW0_SPEED) | | 
 | 		((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) | | 
 | 		((u32) maxpacket << DW0_MAXPKTSIZ)); | 
 | } | 
 |  | 
 | /** | 
 |  * Copy buffer to data controller data memory. | 
 |  * We cannot use memcpy_toio() because the hardware requires 32bit writes | 
 |  */ | 
 | static void copy_to_dmem( | 
 | 	struct imx21 *imx21, int dmem_offset, void *src, int count) | 
 | { | 
 | 	void __iomem *dmem = imx21->regs + USBOTG_DMEM + dmem_offset; | 
 | 	u32 word = 0; | 
 | 	u8 *p = src; | 
 | 	int byte = 0; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < count; i++) { | 
 | 		byte = i % 4; | 
 | 		word += (*p++ << (byte * 8)); | 
 | 		if (byte == 3) { | 
 | 			writel(word, dmem); | 
 | 			dmem += 4; | 
 | 			word = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (count && byte != 3) | 
 | 		writel(word, dmem); | 
 | } | 
 |  | 
 | static void activate_etd(struct imx21 *imx21, int etd_num, u8 dir) | 
 | { | 
 | 	u32 etd_mask = 1 << etd_num; | 
 | 	struct etd_priv *etd = &imx21->etd[etd_num]; | 
 |  | 
 | 	if (etd->dma_handle && unsuitable_for_dma(etd->dma_handle)) { | 
 | 		/* For non aligned isoc the condition below is always true */ | 
 | 		if (etd->len <= etd->dmem_size) { | 
 | 			/* Fits into data memory, use PIO */ | 
 | 			if (dir != TD_DIR_IN) { | 
 | 				copy_to_dmem(imx21, | 
 | 						etd->dmem_offset, | 
 | 						etd->cpu_buffer, etd->len); | 
 | 			} | 
 | 			etd->dma_handle = 0; | 
 |  | 
 | 		} else { | 
 | 			/* Too big for data memory, use bounce buffer */ | 
 | 			enum dma_data_direction dmadir; | 
 |  | 
 | 			if (dir == TD_DIR_IN) { | 
 | 				dmadir = DMA_FROM_DEVICE; | 
 | 				etd->bounce_buffer = kmalloc(etd->len, | 
 | 								GFP_ATOMIC); | 
 | 			} else { | 
 | 				dmadir = DMA_TO_DEVICE; | 
 | 				etd->bounce_buffer = kmemdup(etd->cpu_buffer, | 
 | 								etd->len, | 
 | 								GFP_ATOMIC); | 
 | 			} | 
 | 			if (!etd->bounce_buffer) { | 
 | 				dev_err(imx21->dev, "failed bounce alloc\n"); | 
 | 				goto err_bounce_alloc; | 
 | 			} | 
 |  | 
 | 			etd->dma_handle = | 
 | 				dma_map_single(imx21->dev, | 
 | 						etd->bounce_buffer, | 
 | 						etd->len, | 
 | 						dmadir); | 
 | 			if (dma_mapping_error(imx21->dev, etd->dma_handle)) { | 
 | 				dev_err(imx21->dev, "failed bounce map\n"); | 
 | 				goto err_bounce_map; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); | 
 | 	set_register_bits(imx21, USBH_ETDDONEEN, etd_mask); | 
 | 	clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); | 
 | 	clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); | 
 |  | 
 | 	if (etd->dma_handle) { | 
 | 		set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask); | 
 | 		clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask); | 
 | 		clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask); | 
 | 		writel(etd->dma_handle, imx21->regs + USB_ETDSMSA(etd_num)); | 
 | 		set_register_bits(imx21, USB_ETDDMAEN, etd_mask); | 
 | 	} else { | 
 | 		if (dir != TD_DIR_IN) { | 
 | 			/* need to set for ZLP and PIO */ | 
 | 			set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); | 
 | 			set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	DEBUG_LOG_FRAME(imx21, etd, activated); | 
 |  | 
 | #ifdef DEBUG | 
 | 	if (!etd->active_count) { | 
 | 		int i; | 
 | 		etd->activated_frame = readl(imx21->regs + USBH_FRMNUB); | 
 | 		etd->disactivated_frame = -1; | 
 | 		etd->last_int_frame = -1; | 
 | 		etd->last_req_frame = -1; | 
 |  | 
 | 		for (i = 0; i < 4; i++) | 
 | 			etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	etd->active_count = 1; | 
 | 	writel(etd_mask, imx21->regs + USBH_ETDENSET); | 
 | 	return; | 
 |  | 
 | err_bounce_map: | 
 | 	kfree(etd->bounce_buffer); | 
 |  | 
 | err_bounce_alloc: | 
 | 	free_dmem(imx21, etd); | 
 | 	nonisoc_urb_completed_for_etd(imx21, etd, -ENOMEM); | 
 | } | 
 |  | 
 | /* ===========================================	*/ | 
 | /* Data memory management			*/ | 
 | /* ===========================================	*/ | 
 |  | 
 | static int alloc_dmem(struct imx21 *imx21, unsigned int size, | 
 | 		      struct usb_host_endpoint *ep) | 
 | { | 
 | 	unsigned int offset = 0; | 
 | 	struct imx21_dmem_area *area; | 
 | 	struct imx21_dmem_area *tmp; | 
 |  | 
 | 	size += (~size + 1) & 0x3; /* Round to 4 byte multiple */ | 
 |  | 
 | 	if (size > DMEM_SIZE) { | 
 | 		dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n", | 
 | 			size, DMEM_SIZE); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(tmp, &imx21->dmem_list, list) { | 
 | 		if ((size + offset) < offset) | 
 | 			goto fail; | 
 | 		if ((size + offset) <= tmp->offset) | 
 | 			break; | 
 | 		offset = tmp->size + tmp->offset; | 
 | 		if ((offset + size) > DMEM_SIZE) | 
 | 			goto fail; | 
 | 	} | 
 |  | 
 | 	area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC); | 
 | 	if (area == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	area->ep = ep; | 
 | 	area->offset = offset; | 
 | 	area->size = size; | 
 | 	list_add_tail(&area->list, &tmp->list); | 
 | 	debug_dmem_allocated(imx21, size); | 
 | 	return offset; | 
 |  | 
 | fail: | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | /* Memory now available for a queued ETD - activate it */ | 
 | static void activate_queued_etd(struct imx21 *imx21, | 
 | 	struct etd_priv *etd, u32 dmem_offset) | 
 | { | 
 | 	struct urb_priv *urb_priv = etd->urb->hcpriv; | 
 | 	int etd_num = etd - &imx21->etd[0]; | 
 | 	u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD; | 
 | 	u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03; | 
 |  | 
 | 	dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n", | 
 | 		etd_num); | 
 | 	etd_writel(imx21, etd_num, 1, | 
 | 	    ((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset); | 
 |  | 
 | 	etd->dmem_offset = dmem_offset; | 
 | 	urb_priv->active = 1; | 
 | 	activate_etd(imx21, etd_num, dir); | 
 | } | 
 |  | 
 | static void free_dmem(struct imx21 *imx21, struct etd_priv *etd) | 
 | { | 
 | 	struct imx21_dmem_area *area; | 
 | 	struct etd_priv *tmp; | 
 | 	int found = 0; | 
 | 	int offset; | 
 |  | 
 | 	if (!etd->dmem_size) | 
 | 		return; | 
 | 	etd->dmem_size = 0; | 
 |  | 
 | 	offset = etd->dmem_offset; | 
 | 	list_for_each_entry(area, &imx21->dmem_list, list) { | 
 | 		if (area->offset == offset) { | 
 | 			debug_dmem_freed(imx21, area->size); | 
 | 			list_del(&area->list); | 
 | 			kfree(area); | 
 | 			found = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!found)  { | 
 | 		dev_err(imx21->dev, | 
 | 			"Trying to free unallocated DMEM %d\n", offset); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Try again to allocate memory for anything we've queued */ | 
 | 	list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) { | 
 | 		offset = alloc_dmem(imx21, etd->dmem_size, etd->ep); | 
 | 		if (offset >= 0) { | 
 | 			list_del(&etd->queue); | 
 | 			activate_queued_etd(imx21, etd, (u32)offset); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) | 
 | { | 
 | 	struct imx21_dmem_area *area, *tmp; | 
 |  | 
 | 	list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) { | 
 | 		if (area->ep == ep) { | 
 | 			dev_err(imx21->dev, | 
 | 				"Active DMEM %d for disabled ep=%p\n", | 
 | 				area->offset, ep); | 
 | 			list_del(&area->list); | 
 | 			kfree(area); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* ===========================================	*/ | 
 | /* End handling 				*/ | 
 | /* ===========================================	*/ | 
 |  | 
 | /* Endpoint now idle - release its ETD(s) or assign to queued request */ | 
 | static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | 		int etd_num = ep_priv->etd[i]; | 
 | 		struct etd_priv *etd; | 
 | 		if (etd_num < 0) | 
 | 			continue; | 
 |  | 
 | 		etd = &imx21->etd[etd_num]; | 
 | 		ep_priv->etd[i] = -1; | 
 |  | 
 | 		free_dmem(imx21, etd); /* for isoc */ | 
 |  | 
 | 		if (list_empty(&imx21->queue_for_etd)) { | 
 | 			free_etd(imx21, etd_num); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		dev_dbg(imx21->dev, | 
 | 			"assigning idle etd %d for queued request\n", etd_num); | 
 | 		ep_priv = list_first_entry(&imx21->queue_for_etd, | 
 | 			struct ep_priv, queue); | 
 | 		list_del(&ep_priv->queue); | 
 | 		reset_etd(imx21, etd_num); | 
 | 		ep_priv->waiting_etd = 0; | 
 | 		ep_priv->etd[i] = etd_num; | 
 |  | 
 | 		if (list_empty(&ep_priv->ep->urb_list)) { | 
 | 			dev_err(imx21->dev, "No urb for queued ep!\n"); | 
 | 			continue; | 
 | 		} | 
 | 		schedule_nonisoc_etd(imx21, list_first_entry( | 
 | 			&ep_priv->ep->urb_list, struct urb, urb_list)); | 
 | 	} | 
 | } | 
 |  | 
 | static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status) | 
 | __releases(imx21->lock) | 
 | __acquires(imx21->lock) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct ep_priv *ep_priv = urb->ep->hcpriv; | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 |  | 
 | 	debug_urb_completed(imx21, urb, status); | 
 | 	dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status); | 
 |  | 
 | 	kfree(urb_priv->isoc_td); | 
 | 	kfree(urb->hcpriv); | 
 | 	urb->hcpriv = NULL; | 
 | 	usb_hcd_unlink_urb_from_ep(hcd, urb); | 
 | 	spin_unlock(&imx21->lock); | 
 | 	usb_hcd_giveback_urb(hcd, urb, status); | 
 | 	spin_lock(&imx21->lock); | 
 | 	if (list_empty(&ep_priv->ep->urb_list)) | 
 | 		ep_idle(imx21, ep_priv); | 
 | } | 
 |  | 
 | static void nonisoc_urb_completed_for_etd( | 
 | 	struct imx21 *imx21, struct etd_priv *etd, int status) | 
 | { | 
 | 	struct usb_host_endpoint *ep = etd->ep; | 
 |  | 
 | 	urb_done(imx21->hcd, etd->urb, status); | 
 | 	etd->urb = NULL; | 
 |  | 
 | 	if (!list_empty(&ep->urb_list)) { | 
 | 		struct urb *urb = list_first_entry( | 
 | 					&ep->urb_list, struct urb, urb_list); | 
 |  | 
 | 		dev_vdbg(imx21->dev, "next URB %p\n", urb); | 
 | 		schedule_nonisoc_etd(imx21, urb); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* ===========================================	*/ | 
 | /* ISOC Handling ... 				*/ | 
 | /* ===========================================	*/ | 
 |  | 
 | static void schedule_isoc_etds(struct usb_hcd *hcd, | 
 | 	struct usb_host_endpoint *ep) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct ep_priv *ep_priv = ep->hcpriv; | 
 | 	struct etd_priv *etd; | 
 | 	struct urb_priv *urb_priv; | 
 | 	struct td *td; | 
 | 	int etd_num; | 
 | 	int i; | 
 | 	int cur_frame; | 
 | 	u8 dir; | 
 |  | 
 | 	for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | too_late: | 
 | 		if (list_empty(&ep_priv->td_list)) | 
 | 			break; | 
 |  | 
 | 		etd_num = ep_priv->etd[i]; | 
 | 		if (etd_num < 0) | 
 | 			break; | 
 |  | 
 | 		etd = &imx21->etd[etd_num]; | 
 | 		if (etd->urb) | 
 | 			continue; | 
 |  | 
 | 		td = list_entry(ep_priv->td_list.next, struct td, list); | 
 | 		list_del(&td->list); | 
 | 		urb_priv = td->urb->hcpriv; | 
 |  | 
 | 		cur_frame = imx21_hc_get_frame(hcd); | 
 | 		if (frame_after(cur_frame, td->frame)) { | 
 | 			dev_dbg(imx21->dev, "isoc too late frame %d > %d\n", | 
 | 				cur_frame, td->frame); | 
 | 			urb_priv->isoc_status = -EXDEV; | 
 | 			td->urb->iso_frame_desc[ | 
 | 				td->isoc_index].actual_length = 0; | 
 | 			td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV; | 
 | 			if (--urb_priv->isoc_remaining == 0) | 
 | 				urb_done(hcd, td->urb, urb_priv->isoc_status); | 
 | 			goto too_late; | 
 | 		} | 
 |  | 
 | 		urb_priv->active = 1; | 
 | 		etd->td = td; | 
 | 		etd->ep = td->ep; | 
 | 		etd->urb = td->urb; | 
 | 		etd->len = td->len; | 
 | 		etd->dma_handle = td->dma_handle; | 
 | 		etd->cpu_buffer = td->cpu_buffer; | 
 |  | 
 | 		debug_isoc_submitted(imx21, cur_frame, td); | 
 |  | 
 | 		dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN; | 
 | 		setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size); | 
 | 		etd_writel(imx21, etd_num, 1, etd->dmem_offset); | 
 | 		etd_writel(imx21, etd_num, 2, | 
 | 			(TD_NOTACCESSED << DW2_COMPCODE) | | 
 | 			((td->frame & 0xFFFF) << DW2_STARTFRM)); | 
 | 		etd_writel(imx21, etd_num, 3, | 
 | 			(TD_NOTACCESSED << DW3_COMPCODE0) | | 
 | 			(td->len << DW3_PKTLEN0)); | 
 |  | 
 | 		activate_etd(imx21, etd_num, dir); | 
 | 	} | 
 | } | 
 |  | 
 | static void isoc_etd_done(struct usb_hcd *hcd, int etd_num) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	int etd_mask = 1 << etd_num; | 
 | 	struct etd_priv *etd = imx21->etd + etd_num; | 
 | 	struct urb *urb = etd->urb; | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 | 	struct td *td = etd->td; | 
 | 	struct usb_host_endpoint *ep = etd->ep; | 
 | 	int isoc_index = td->isoc_index; | 
 | 	unsigned int pipe = urb->pipe; | 
 | 	int dir_in = usb_pipein(pipe); | 
 | 	int cc; | 
 | 	int bytes_xfrd; | 
 |  | 
 | 	disactivate_etd(imx21, etd_num); | 
 |  | 
 | 	cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf; | 
 | 	bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff; | 
 |  | 
 | 	/* Input doesn't always fill the buffer, don't generate an error | 
 | 	 * when this happens. | 
 | 	 */ | 
 | 	if (dir_in && (cc == TD_DATAUNDERRUN)) | 
 | 		cc = TD_CC_NOERROR; | 
 |  | 
 | 	if (cc == TD_NOTACCESSED) | 
 | 		bytes_xfrd = 0; | 
 |  | 
 | 	debug_isoc_completed(imx21, | 
 | 		imx21_hc_get_frame(hcd), td, cc, bytes_xfrd); | 
 | 	if (cc) { | 
 | 		urb_priv->isoc_status = -EXDEV; | 
 | 		dev_dbg(imx21->dev, | 
 | 			"bad iso cc=0x%X frame=%d sched frame=%d " | 
 | 			"cnt=%d len=%d urb=%p etd=%d index=%d\n", | 
 | 			cc,  imx21_hc_get_frame(hcd), td->frame, | 
 | 			bytes_xfrd, td->len, urb, etd_num, isoc_index); | 
 | 	} | 
 |  | 
 | 	if (dir_in) { | 
 | 		clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); | 
 | 		if (!etd->dma_handle) | 
 | 			memcpy_fromio(etd->cpu_buffer, | 
 | 				imx21->regs + USBOTG_DMEM + etd->dmem_offset, | 
 | 				bytes_xfrd); | 
 | 	} | 
 |  | 
 | 	urb->actual_length += bytes_xfrd; | 
 | 	urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd; | 
 | 	urb->iso_frame_desc[isoc_index].status = cc_to_error[cc]; | 
 |  | 
 | 	etd->td = NULL; | 
 | 	etd->urb = NULL; | 
 | 	etd->ep = NULL; | 
 |  | 
 | 	if (--urb_priv->isoc_remaining == 0) | 
 | 		urb_done(hcd, urb, urb_priv->isoc_status); | 
 |  | 
 | 	schedule_isoc_etds(hcd, ep); | 
 | } | 
 |  | 
 | static struct ep_priv *alloc_isoc_ep( | 
 | 	struct imx21 *imx21, struct usb_host_endpoint *ep) | 
 | { | 
 | 	struct ep_priv *ep_priv; | 
 | 	int i; | 
 |  | 
 | 	ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); | 
 | 	if (!ep_priv) | 
 | 		return NULL; | 
 |  | 
 | 	for (i = 0; i < NUM_ISO_ETDS; i++) | 
 | 		ep_priv->etd[i] = -1; | 
 |  | 
 | 	INIT_LIST_HEAD(&ep_priv->td_list); | 
 | 	ep_priv->ep = ep; | 
 | 	ep->hcpriv = ep_priv; | 
 | 	return ep_priv; | 
 | } | 
 |  | 
 | static int alloc_isoc_etds(struct imx21 *imx21, struct ep_priv *ep_priv) | 
 | { | 
 | 	int i, j; | 
 | 	int etd_num; | 
 |  | 
 | 	/* Allocate the ETDs if required */ | 
 | 	for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | 		if (ep_priv->etd[i] < 0) { | 
 | 			etd_num = alloc_etd(imx21); | 
 | 			if (etd_num < 0) | 
 | 				goto alloc_etd_failed; | 
 |  | 
 | 			ep_priv->etd[i] = etd_num; | 
 | 			imx21->etd[etd_num].ep = ep_priv->ep; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | alloc_etd_failed: | 
 | 	dev_err(imx21->dev, "isoc: Couldn't allocate etd\n"); | 
 | 	for (j = 0; j < i; j++) { | 
 | 		free_etd(imx21, ep_priv->etd[j]); | 
 | 		ep_priv->etd[j] = -1; | 
 | 	} | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, | 
 | 				     struct usb_host_endpoint *ep, | 
 | 				     struct urb *urb, gfp_t mem_flags) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct urb_priv *urb_priv; | 
 | 	unsigned long flags; | 
 | 	struct ep_priv *ep_priv; | 
 | 	struct td *td = NULL; | 
 | 	int i; | 
 | 	int ret; | 
 | 	int cur_frame; | 
 | 	u16 maxpacket; | 
 |  | 
 | 	urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); | 
 | 	if (urb_priv == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	urb_priv->isoc_td = kcalloc(urb->number_of_packets, sizeof(struct td), | 
 | 				    mem_flags); | 
 | 	if (urb_priv->isoc_td == NULL) { | 
 | 		ret = -ENOMEM; | 
 | 		goto alloc_td_failed; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	if (ep->hcpriv == NULL) { | 
 | 		ep_priv = alloc_isoc_ep(imx21, ep); | 
 | 		if (ep_priv == NULL) { | 
 | 			ret = -ENOMEM; | 
 | 			goto alloc_ep_failed; | 
 | 		} | 
 | 	} else { | 
 | 		ep_priv = ep->hcpriv; | 
 | 	} | 
 |  | 
 | 	ret = alloc_isoc_etds(imx21, ep_priv); | 
 | 	if (ret) | 
 | 		goto alloc_etd_failed; | 
 |  | 
 | 	ret = usb_hcd_link_urb_to_ep(hcd, urb); | 
 | 	if (ret) | 
 | 		goto link_failed; | 
 |  | 
 | 	urb->status = -EINPROGRESS; | 
 | 	urb->actual_length = 0; | 
 | 	urb->error_count = 0; | 
 | 	urb->hcpriv = urb_priv; | 
 | 	urb_priv->ep = ep; | 
 |  | 
 | 	/* allocate data memory for largest packets if not already done */ | 
 | 	maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); | 
 | 	for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | 		struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]]; | 
 |  | 
 | 		if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) { | 
 | 			/* not sure if this can really occur.... */ | 
 | 			dev_err(imx21->dev, "increasing isoc buffer %d->%d\n", | 
 | 				etd->dmem_size, maxpacket); | 
 | 			ret = -EMSGSIZE; | 
 | 			goto alloc_dmem_failed; | 
 | 		} | 
 |  | 
 | 		if (etd->dmem_size == 0) { | 
 | 			etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep); | 
 | 			if (etd->dmem_offset < 0) { | 
 | 				dev_dbg(imx21->dev, "failed alloc isoc dmem\n"); | 
 | 				ret = -EAGAIN; | 
 | 				goto alloc_dmem_failed; | 
 | 			} | 
 | 			etd->dmem_size = maxpacket; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* calculate frame */ | 
 | 	cur_frame = imx21_hc_get_frame(hcd); | 
 | 	i = 0; | 
 | 	if (list_empty(&ep_priv->td_list)) { | 
 | 		urb->start_frame = wrap_frame(cur_frame + 5); | 
 | 	} else { | 
 | 		urb->start_frame = wrap_frame(list_entry(ep_priv->td_list.prev, | 
 | 				struct td, list)->frame + urb->interval); | 
 |  | 
 | 		if (frame_after(cur_frame, urb->start_frame)) { | 
 | 			dev_dbg(imx21->dev, | 
 | 				"enqueue: adjusting iso start %d (cur=%d) asap=%d\n", | 
 | 				urb->start_frame, cur_frame, | 
 | 				(urb->transfer_flags & URB_ISO_ASAP) != 0); | 
 | 			i = DIV_ROUND_UP(wrap_frame( | 
 | 					cur_frame - urb->start_frame), | 
 | 					urb->interval); | 
 |  | 
 | 			/* Treat underruns as if URB_ISO_ASAP was set */ | 
 | 			if ((urb->transfer_flags & URB_ISO_ASAP) || | 
 | 					i >= urb->number_of_packets) { | 
 | 				urb->start_frame = wrap_frame(urb->start_frame | 
 | 						+ i * urb->interval); | 
 | 				i = 0; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* set up transfers */ | 
 | 	urb_priv->isoc_remaining = urb->number_of_packets - i; | 
 | 	td = urb_priv->isoc_td; | 
 | 	for (; i < urb->number_of_packets; i++, td++) { | 
 | 		unsigned int offset = urb->iso_frame_desc[i].offset; | 
 | 		td->ep = ep; | 
 | 		td->urb = urb; | 
 | 		td->len = urb->iso_frame_desc[i].length; | 
 | 		td->isoc_index = i; | 
 | 		td->frame = wrap_frame(urb->start_frame + urb->interval * i); | 
 | 		td->dma_handle = urb->transfer_dma + offset; | 
 | 		td->cpu_buffer = urb->transfer_buffer + offset; | 
 | 		list_add_tail(&td->list, &ep_priv->td_list); | 
 | 	} | 
 |  | 
 | 	dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n", | 
 | 		urb->number_of_packets, urb->start_frame, td->frame); | 
 |  | 
 | 	debug_urb_submitted(imx21, urb); | 
 | 	schedule_isoc_etds(hcd, ep); | 
 |  | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	return 0; | 
 |  | 
 | alloc_dmem_failed: | 
 | 	usb_hcd_unlink_urb_from_ep(hcd, urb); | 
 |  | 
 | link_failed: | 
 | alloc_etd_failed: | 
 | alloc_ep_failed: | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	kfree(urb_priv->isoc_td); | 
 |  | 
 | alloc_td_failed: | 
 | 	kfree(urb_priv); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void dequeue_isoc_urb(struct imx21 *imx21, | 
 | 	struct urb *urb, struct ep_priv *ep_priv) | 
 | { | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 | 	struct td *td, *tmp; | 
 | 	int i; | 
 |  | 
 | 	if (urb_priv->active) { | 
 | 		for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | 			int etd_num = ep_priv->etd[i]; | 
 | 			if (etd_num != -1 && imx21->etd[etd_num].urb == urb) { | 
 | 				struct etd_priv *etd = imx21->etd + etd_num; | 
 |  | 
 | 				reset_etd(imx21, etd_num); | 
 | 				free_dmem(imx21, etd); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) { | 
 | 		if (td->urb == urb) { | 
 | 			dev_vdbg(imx21->dev, "removing td %p\n", td); | 
 | 			list_del(&td->list); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* =========================================== */ | 
 | /* NON ISOC Handling ... 			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) | 
 | { | 
 | 	unsigned int pipe = urb->pipe; | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 | 	struct ep_priv *ep_priv = urb_priv->ep->hcpriv; | 
 | 	int state = urb_priv->state; | 
 | 	int etd_num = ep_priv->etd[0]; | 
 | 	struct etd_priv *etd; | 
 | 	u32 count; | 
 | 	u16 etd_buf_size; | 
 | 	u16 maxpacket; | 
 | 	u8 dir; | 
 | 	u8 bufround; | 
 | 	u8 datatoggle; | 
 | 	u8 interval = 0; | 
 | 	u8 relpolpos = 0; | 
 |  | 
 | 	if (etd_num < 0) { | 
 | 		dev_err(imx21->dev, "No valid ETD\n"); | 
 | 		return; | 
 | 	} | 
 | 	if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num)) | 
 | 		dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num); | 
 |  | 
 | 	etd = &imx21->etd[etd_num]; | 
 | 	maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)); | 
 | 	if (!maxpacket) | 
 | 		maxpacket = 8; | 
 |  | 
 | 	if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) { | 
 | 		if (state == US_CTRL_SETUP) { | 
 | 			dir = TD_DIR_SETUP; | 
 | 			if (unsuitable_for_dma(urb->setup_dma)) | 
 | 				usb_hcd_unmap_urb_setup_for_dma(imx21->hcd, | 
 | 					urb); | 
 | 			etd->dma_handle = urb->setup_dma; | 
 | 			etd->cpu_buffer = urb->setup_packet; | 
 | 			bufround = 0; | 
 | 			count = 8; | 
 | 			datatoggle = TD_TOGGLE_DATA0; | 
 | 		} else {	/* US_CTRL_ACK */ | 
 | 			dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT; | 
 | 			bufround = 0; | 
 | 			count = 0; | 
 | 			datatoggle = TD_TOGGLE_DATA1; | 
 | 		} | 
 | 	} else { | 
 | 		dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; | 
 | 		bufround = (dir == TD_DIR_IN) ? 1 : 0; | 
 | 		if (unsuitable_for_dma(urb->transfer_dma)) | 
 | 			usb_hcd_unmap_urb_for_dma(imx21->hcd, urb); | 
 |  | 
 | 		etd->dma_handle = urb->transfer_dma; | 
 | 		etd->cpu_buffer = urb->transfer_buffer; | 
 | 		if (usb_pipebulk(pipe) && (state == US_BULK0)) | 
 | 			count = 0; | 
 | 		else | 
 | 			count = urb->transfer_buffer_length; | 
 |  | 
 | 		if (usb_pipecontrol(pipe)) { | 
 | 			datatoggle = TD_TOGGLE_DATA1; | 
 | 		} else { | 
 | 			if (usb_gettoggle( | 
 | 					urb->dev, | 
 | 					usb_pipeendpoint(urb->pipe), | 
 | 					usb_pipeout(urb->pipe))) | 
 | 				datatoggle = TD_TOGGLE_DATA1; | 
 | 			else | 
 | 				datatoggle = TD_TOGGLE_DATA0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	etd->urb = urb; | 
 | 	etd->ep = urb_priv->ep; | 
 | 	etd->len = count; | 
 |  | 
 | 	if (usb_pipeint(pipe)) { | 
 | 		interval = urb->interval; | 
 | 		relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff; | 
 | 	} | 
 |  | 
 | 	/* Write ETD to device memory */ | 
 | 	setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket); | 
 |  | 
 | 	etd_writel(imx21, etd_num, 2, | 
 | 		(u32) interval << DW2_POLINTERV | | 
 | 		((u32) relpolpos << DW2_RELPOLPOS) | | 
 | 		((u32) dir << DW2_DIRPID) | | 
 | 		((u32) bufround << DW2_BUFROUND) | | 
 | 		((u32) datatoggle << DW2_DATATOG) | | 
 | 		((u32) TD_NOTACCESSED << DW2_COMPCODE)); | 
 |  | 
 | 	/* DMA will always transfer buffer size even if TOBYCNT in DWORD3 | 
 | 	   is smaller. Make sure we don't overrun the buffer! | 
 | 	 */ | 
 | 	if (count && count < maxpacket) | 
 | 		etd_buf_size = count; | 
 | 	else | 
 | 		etd_buf_size = maxpacket; | 
 |  | 
 | 	etd_writel(imx21, etd_num, 3, | 
 | 		((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count); | 
 |  | 
 | 	if (!count) | 
 | 		etd->dma_handle = 0; | 
 |  | 
 | 	/* allocate x and y buffer space at once */ | 
 | 	etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket; | 
 | 	etd->dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep); | 
 | 	if (etd->dmem_offset < 0) { | 
 | 		/* Setup everything we can in HW and update when we get DMEM */ | 
 | 		etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16); | 
 |  | 
 | 		dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num); | 
 | 		debug_urb_queued_for_dmem(imx21, urb); | 
 | 		list_add_tail(&etd->queue, &imx21->queue_for_dmem); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	etd_writel(imx21, etd_num, 1, | 
 | 		(((u32) etd->dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) | | 
 | 		(u32) etd->dmem_offset); | 
 |  | 
 | 	urb_priv->active = 1; | 
 |  | 
 | 	/* enable the ETD to kick off transfer */ | 
 | 	dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n", | 
 | 		etd_num, count, dir != TD_DIR_IN ? "out" : "in"); | 
 | 	activate_etd(imx21, etd_num, dir); | 
 |  | 
 | } | 
 |  | 
 | static void nonisoc_etd_done(struct usb_hcd *hcd, int etd_num) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct etd_priv *etd = &imx21->etd[etd_num]; | 
 | 	struct urb *urb = etd->urb; | 
 | 	u32 etd_mask = 1 << etd_num; | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 | 	int dir; | 
 | 	int cc; | 
 | 	u32 bytes_xfrd; | 
 | 	int etd_done; | 
 |  | 
 | 	disactivate_etd(imx21, etd_num); | 
 |  | 
 | 	dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3; | 
 | 	cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf; | 
 | 	bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff); | 
 |  | 
 | 	/* save toggle carry */ | 
 | 	usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), | 
 | 		      usb_pipeout(urb->pipe), | 
 | 		      (etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1); | 
 |  | 
 | 	if (dir == TD_DIR_IN) { | 
 | 		clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); | 
 | 		clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); | 
 |  | 
 | 		if (etd->bounce_buffer) { | 
 | 			memcpy(etd->cpu_buffer, etd->bounce_buffer, bytes_xfrd); | 
 | 			dma_unmap_single(imx21->dev, | 
 | 				etd->dma_handle, etd->len, DMA_FROM_DEVICE); | 
 | 		} else if (!etd->dma_handle && bytes_xfrd) {/* PIO */ | 
 | 			memcpy_fromio(etd->cpu_buffer, | 
 | 				imx21->regs + USBOTG_DMEM + etd->dmem_offset, | 
 | 				bytes_xfrd); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	kfree(etd->bounce_buffer); | 
 | 	etd->bounce_buffer = NULL; | 
 | 	free_dmem(imx21, etd); | 
 |  | 
 | 	urb->error_count = 0; | 
 | 	if (!(urb->transfer_flags & URB_SHORT_NOT_OK) | 
 | 			&& (cc == TD_DATAUNDERRUN)) | 
 | 		cc = TD_CC_NOERROR; | 
 |  | 
 | 	if (cc != 0) | 
 | 		dev_vdbg(imx21->dev, "cc is 0x%x\n", cc); | 
 |  | 
 | 	etd_done = (cc_to_error[cc] != 0);	/* stop if error */ | 
 |  | 
 | 	switch (usb_pipetype(urb->pipe)) { | 
 | 	case PIPE_CONTROL: | 
 | 		switch (urb_priv->state) { | 
 | 		case US_CTRL_SETUP: | 
 | 			if (urb->transfer_buffer_length > 0) | 
 | 				urb_priv->state = US_CTRL_DATA; | 
 | 			else | 
 | 				urb_priv->state = US_CTRL_ACK; | 
 | 			break; | 
 | 		case US_CTRL_DATA: | 
 | 			urb->actual_length += bytes_xfrd; | 
 | 			urb_priv->state = US_CTRL_ACK; | 
 | 			break; | 
 | 		case US_CTRL_ACK: | 
 | 			etd_done = 1; | 
 | 			break; | 
 | 		default: | 
 | 			dev_err(imx21->dev, | 
 | 				"Invalid pipe state %d\n", urb_priv->state); | 
 | 			etd_done = 1; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case PIPE_BULK: | 
 | 		urb->actual_length += bytes_xfrd; | 
 | 		if ((urb_priv->state == US_BULK) | 
 | 		    && (urb->transfer_flags & URB_ZERO_PACKET) | 
 | 		    && urb->transfer_buffer_length > 0 | 
 | 		    && ((urb->transfer_buffer_length % | 
 | 			 usb_maxpacket(urb->dev, urb->pipe, | 
 | 				       usb_pipeout(urb->pipe))) == 0)) { | 
 | 			/* need a 0-packet */ | 
 | 			urb_priv->state = US_BULK0; | 
 | 		} else { | 
 | 			etd_done = 1; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case PIPE_INTERRUPT: | 
 | 		urb->actual_length += bytes_xfrd; | 
 | 		etd_done = 1; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (etd_done) | 
 | 		nonisoc_urb_completed_for_etd(imx21, etd, cc_to_error[cc]); | 
 | 	else { | 
 | 		dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state); | 
 | 		schedule_nonisoc_etd(imx21, urb); | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | static struct ep_priv *alloc_ep(void) | 
 | { | 
 | 	int i; | 
 | 	struct ep_priv *ep_priv; | 
 |  | 
 | 	ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); | 
 | 	if (!ep_priv) | 
 | 		return NULL; | 
 |  | 
 | 	for (i = 0; i < NUM_ISO_ETDS; ++i) | 
 | 		ep_priv->etd[i] = -1; | 
 |  | 
 | 	return ep_priv; | 
 | } | 
 |  | 
 | static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, | 
 | 				struct urb *urb, gfp_t mem_flags) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct usb_host_endpoint *ep = urb->ep; | 
 | 	struct urb_priv *urb_priv; | 
 | 	struct ep_priv *ep_priv; | 
 | 	struct etd_priv *etd; | 
 | 	int ret; | 
 | 	unsigned long flags; | 
 |  | 
 | 	dev_vdbg(imx21->dev, | 
 | 		"enqueue urb=%p ep=%p len=%d " | 
 | 		"buffer=%p dma=%pad setupBuf=%p setupDma=%pad\n", | 
 | 		urb, ep, | 
 | 		urb->transfer_buffer_length, | 
 | 		urb->transfer_buffer, &urb->transfer_dma, | 
 | 		urb->setup_packet, &urb->setup_dma); | 
 |  | 
 | 	if (usb_pipeisoc(urb->pipe)) | 
 | 		return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); | 
 |  | 
 | 	urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); | 
 | 	if (!urb_priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	ep_priv = ep->hcpriv; | 
 | 	if (ep_priv == NULL) { | 
 | 		ep_priv = alloc_ep(); | 
 | 		if (!ep_priv) { | 
 | 			ret = -ENOMEM; | 
 | 			goto failed_alloc_ep; | 
 | 		} | 
 | 		ep->hcpriv = ep_priv; | 
 | 		ep_priv->ep = ep; | 
 | 	} | 
 |  | 
 | 	ret = usb_hcd_link_urb_to_ep(hcd, urb); | 
 | 	if (ret) | 
 | 		goto failed_link; | 
 |  | 
 | 	urb->status = -EINPROGRESS; | 
 | 	urb->actual_length = 0; | 
 | 	urb->error_count = 0; | 
 | 	urb->hcpriv = urb_priv; | 
 | 	urb_priv->ep = ep; | 
 |  | 
 | 	switch (usb_pipetype(urb->pipe)) { | 
 | 	case PIPE_CONTROL: | 
 | 		urb_priv->state = US_CTRL_SETUP; | 
 | 		break; | 
 | 	case PIPE_BULK: | 
 | 		urb_priv->state = US_BULK; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	debug_urb_submitted(imx21, urb); | 
 | 	if (ep_priv->etd[0] < 0) { | 
 | 		if (ep_priv->waiting_etd) { | 
 | 			dev_dbg(imx21->dev, | 
 | 				"no ETD available already queued %p\n", | 
 | 				ep_priv); | 
 | 			debug_urb_queued_for_etd(imx21, urb); | 
 | 			goto out; | 
 | 		} | 
 | 		ep_priv->etd[0] = alloc_etd(imx21); | 
 | 		if (ep_priv->etd[0] < 0) { | 
 | 			dev_dbg(imx21->dev, | 
 | 				"no ETD available queueing %p\n", ep_priv); | 
 | 			debug_urb_queued_for_etd(imx21, urb); | 
 | 			list_add_tail(&ep_priv->queue, &imx21->queue_for_etd); | 
 | 			ep_priv->waiting_etd = 1; | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Schedule if no URB already active for this endpoint */ | 
 | 	etd = &imx21->etd[ep_priv->etd[0]]; | 
 | 	if (etd->urb == NULL) { | 
 | 		DEBUG_LOG_FRAME(imx21, etd, last_req); | 
 | 		schedule_nonisoc_etd(imx21, urb); | 
 | 	} | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	return 0; | 
 |  | 
 | failed_link: | 
 | failed_alloc_ep: | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	kfree(urb_priv); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, | 
 | 				int status) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	unsigned long flags; | 
 | 	struct usb_host_endpoint *ep; | 
 | 	struct ep_priv *ep_priv; | 
 | 	struct urb_priv *urb_priv = urb->hcpriv; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n", | 
 | 		urb, usb_pipeisoc(urb->pipe), status); | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	ret = usb_hcd_check_unlink_urb(hcd, urb, status); | 
 | 	if (ret) | 
 | 		goto fail; | 
 | 	ep = urb_priv->ep; | 
 | 	ep_priv = ep->hcpriv; | 
 |  | 
 | 	debug_urb_unlinked(imx21, urb); | 
 |  | 
 | 	if (usb_pipeisoc(urb->pipe)) { | 
 | 		dequeue_isoc_urb(imx21, urb, ep_priv); | 
 | 		schedule_isoc_etds(hcd, ep); | 
 | 	} else if (urb_priv->active) { | 
 | 		int etd_num = ep_priv->etd[0]; | 
 | 		if (etd_num != -1) { | 
 | 			struct etd_priv *etd = &imx21->etd[etd_num]; | 
 |  | 
 | 			disactivate_etd(imx21, etd_num); | 
 | 			free_dmem(imx21, etd); | 
 | 			etd->urb = NULL; | 
 | 			kfree(etd->bounce_buffer); | 
 | 			etd->bounce_buffer = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	urb_done(hcd, urb, status); | 
 |  | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	return 0; | 
 |  | 
 | fail: | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* =========================================== */ | 
 | /* Interrupt dispatch	 			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof) | 
 | { | 
 | 	int etd_num; | 
 | 	int enable_sof_int = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) { | 
 | 		u32 etd_mask = 1 << etd_num; | 
 | 		u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask; | 
 | 		u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask; | 
 | 		struct etd_priv *etd = &imx21->etd[etd_num]; | 
 |  | 
 |  | 
 | 		if (done) { | 
 | 			DEBUG_LOG_FRAME(imx21, etd, last_int); | 
 | 		} else { | 
 | /* | 
 |  * Kludge warning! | 
 |  * | 
 |  * When multiple transfers are using the bus we sometimes get into a state | 
 |  * where the transfer has completed (the CC field of the ETD is != 0x0F), | 
 |  * the ETD has self disabled but the ETDDONESTAT flag is not set | 
 |  * (and hence no interrupt occurs). | 
 |  * This causes the transfer in question to hang. | 
 |  * The kludge below checks for this condition at each SOF and processes any | 
 |  * blocked ETDs (after an arbitrary 10 frame wait) | 
 |  * | 
 |  * With a single active transfer the usbtest test suite will run for days | 
 |  * without the kludge. | 
 |  * With other bus activity (eg mass storage) even just test1 will hang without | 
 |  * the kludge. | 
 |  */ | 
 | 			u32 dword0; | 
 | 			int cc; | 
 |  | 
 | 			if (etd->active_count && !enabled) /* suspicious... */ | 
 | 				enable_sof_int = 1; | 
 |  | 
 | 			if (!sof || enabled || !etd->active_count) | 
 | 				continue; | 
 |  | 
 | 			cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE; | 
 | 			if (cc == TD_NOTACCESSED) | 
 | 				continue; | 
 |  | 
 | 			if (++etd->active_count < 10) | 
 | 				continue; | 
 |  | 
 | 			dword0 = etd_readl(imx21, etd_num, 0); | 
 | 			dev_dbg(imx21->dev, | 
 | 				"unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n", | 
 | 				etd_num, dword0 & 0x7F, | 
 | 				(dword0 >> DW0_ENDPNT) & 0x0F, | 
 | 				cc); | 
 |  | 
 | #ifdef DEBUG | 
 | 			dev_dbg(imx21->dev, | 
 | 				"frame: act=%d disact=%d" | 
 | 				" int=%d req=%d cur=%d\n", | 
 | 				etd->activated_frame, | 
 | 				etd->disactivated_frame, | 
 | 				etd->last_int_frame, | 
 | 				etd->last_req_frame, | 
 | 				readl(imx21->regs + USBH_FRMNUB)); | 
 | 			imx21->debug_unblocks++; | 
 | #endif | 
 | 			etd->active_count = 0; | 
 | /* End of kludge */ | 
 | 		} | 
 |  | 
 | 		if (etd->ep == NULL || etd->urb == NULL) { | 
 | 			dev_dbg(imx21->dev, | 
 | 				"Interrupt for unexpected etd %d" | 
 | 				" ep=%p urb=%p\n", | 
 | 				etd_num, etd->ep, etd->urb); | 
 | 			disactivate_etd(imx21, etd_num); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (usb_pipeisoc(etd->urb->pipe)) | 
 | 			isoc_etd_done(hcd, etd_num); | 
 | 		else | 
 | 			nonisoc_etd_done(hcd, etd_num); | 
 | 	} | 
 |  | 
 | 	/* only enable SOF interrupt if it may be needed for the kludge */ | 
 | 	if (enable_sof_int) | 
 | 		set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); | 
 | 	else | 
 | 		clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); | 
 |  | 
 |  | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | } | 
 |  | 
 | static irqreturn_t imx21_irq(struct usb_hcd *hcd) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	u32 ints = readl(imx21->regs + USBH_SYSISR); | 
 |  | 
 | 	if (ints & USBH_SYSIEN_HERRINT) | 
 | 		dev_dbg(imx21->dev, "Scheduling error\n"); | 
 |  | 
 | 	if (ints & USBH_SYSIEN_SORINT) | 
 | 		dev_dbg(imx21->dev, "Scheduling overrun\n"); | 
 |  | 
 | 	if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT)) | 
 | 		process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT); | 
 |  | 
 | 	writel(ints, imx21->regs + USBH_SYSISR); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static void imx21_hc_endpoint_disable(struct usb_hcd *hcd, | 
 | 				      struct usb_host_endpoint *ep) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	unsigned long flags; | 
 | 	struct ep_priv *ep_priv; | 
 | 	int i; | 
 |  | 
 | 	if (ep == NULL) | 
 | 		return; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 | 	ep_priv = ep->hcpriv; | 
 | 	dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv); | 
 |  | 
 | 	if (!list_empty(&ep->urb_list)) | 
 | 		dev_dbg(imx21->dev, "ep's URB list is not empty\n"); | 
 |  | 
 | 	if (ep_priv != NULL) { | 
 | 		for (i = 0; i < NUM_ISO_ETDS; i++) { | 
 | 			if (ep_priv->etd[i] > -1) | 
 | 				dev_dbg(imx21->dev, "free etd %d for disable\n", | 
 | 					ep_priv->etd[i]); | 
 |  | 
 | 			free_etd(imx21, ep_priv->etd[i]); | 
 | 		} | 
 | 		kfree(ep_priv); | 
 | 		ep->hcpriv = NULL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < USB_NUM_ETD; i++) { | 
 | 		if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) { | 
 | 			dev_err(imx21->dev, | 
 | 				"Active etd %d for disabled ep=%p!\n", i, ep); | 
 | 			free_etd(imx21, i); | 
 | 		} | 
 | 	} | 
 | 	free_epdmem(imx21, ep); | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | } | 
 |  | 
 | /* =========================================== */ | 
 | /* Hub handling		 			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static int get_hub_descriptor(struct usb_hcd *hcd, | 
 | 			      struct usb_hub_descriptor *desc) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */ | 
 | 	desc->bHubContrCurrent = 0; | 
 |  | 
 | 	desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) | 
 | 		& USBH_ROOTHUBA_NDNSTMPRT_MASK; | 
 | 	desc->bDescLength = 9; | 
 | 	desc->bPwrOn2PwrGood = 0; | 
 | 	desc->wHubCharacteristics = (__force __u16) cpu_to_le16( | 
 | 		HUB_CHAR_NO_LPSM |	/* No power switching */ | 
 | 		HUB_CHAR_NO_OCPM);	/* No over current protection */ | 
 |  | 
 | 	desc->u.hs.DeviceRemovable[0] = 1 << 1; | 
 | 	desc->u.hs.DeviceRemovable[1] = ~0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	int ports; | 
 | 	int changed = 0; | 
 | 	int i; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 | 	ports = readl(imx21->regs + USBH_ROOTHUBA) | 
 | 		& USBH_ROOTHUBA_NDNSTMPRT_MASK; | 
 | 	if (ports > 7) { | 
 | 		ports = 7; | 
 | 		dev_err(imx21->dev, "ports %d > 7\n", ports); | 
 | 	} | 
 | 	for (i = 0; i < ports; i++) { | 
 | 		if (readl(imx21->regs + USBH_PORTSTAT(i)) & | 
 | 			(USBH_PORTSTAT_CONNECTSC | | 
 | 			USBH_PORTSTAT_PRTENBLSC | | 
 | 			USBH_PORTSTAT_PRTSTATSC | | 
 | 			USBH_PORTSTAT_OVRCURIC | | 
 | 			USBH_PORTSTAT_PRTRSTSC)) { | 
 |  | 
 | 			changed = 1; | 
 | 			buf[0] |= 1 << (i + 1); | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 |  | 
 | 	if (changed) | 
 | 		dev_info(imx21->dev, "Hub status changed\n"); | 
 | 	return changed; | 
 | } | 
 |  | 
 | static int imx21_hc_hub_control(struct usb_hcd *hcd, | 
 | 				u16 typeReq, | 
 | 				u16 wValue, u16 wIndex, char *buf, u16 wLength) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	int rc = 0; | 
 | 	u32 status_write = 0; | 
 |  | 
 | 	switch (typeReq) { | 
 | 	case ClearHubFeature: | 
 | 		dev_dbg(imx21->dev, "ClearHubFeature\n"); | 
 | 		switch (wValue) { | 
 | 		case C_HUB_OVER_CURRENT: | 
 | 			dev_dbg(imx21->dev, "    OVER_CURRENT\n"); | 
 | 			break; | 
 | 		case C_HUB_LOCAL_POWER: | 
 | 			dev_dbg(imx21->dev, "    LOCAL_POWER\n"); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(imx21->dev, "    unknown\n"); | 
 | 			rc = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case ClearPortFeature: | 
 | 		dev_dbg(imx21->dev, "ClearPortFeature\n"); | 
 | 		switch (wValue) { | 
 | 		case USB_PORT_FEAT_ENABLE: | 
 | 			dev_dbg(imx21->dev, "    ENABLE\n"); | 
 | 			status_write = USBH_PORTSTAT_CURCONST; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_SUSPEND: | 
 | 			dev_dbg(imx21->dev, "    SUSPEND\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTOVRCURI; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_POWER: | 
 | 			dev_dbg(imx21->dev, "    POWER\n"); | 
 | 			status_write = USBH_PORTSTAT_LSDEVCON; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_C_ENABLE: | 
 | 			dev_dbg(imx21->dev, "    C_ENABLE\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTENBLSC; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_C_SUSPEND: | 
 | 			dev_dbg(imx21->dev, "    C_SUSPEND\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTSTATSC; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_C_CONNECTION: | 
 | 			dev_dbg(imx21->dev, "    C_CONNECTION\n"); | 
 | 			status_write = USBH_PORTSTAT_CONNECTSC; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_C_OVER_CURRENT: | 
 | 			dev_dbg(imx21->dev, "    C_OVER_CURRENT\n"); | 
 | 			status_write = USBH_PORTSTAT_OVRCURIC; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_C_RESET: | 
 | 			dev_dbg(imx21->dev, "    C_RESET\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTRSTSC; | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(imx21->dev, "    unknown\n"); | 
 | 			rc = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 |  | 
 | 	case GetHubDescriptor: | 
 | 		dev_dbg(imx21->dev, "GetHubDescriptor\n"); | 
 | 		rc = get_hub_descriptor(hcd, (void *)buf); | 
 | 		break; | 
 |  | 
 | 	case GetHubStatus: | 
 | 		dev_dbg(imx21->dev, "  GetHubStatus\n"); | 
 | 		*(__le32 *) buf = 0; | 
 | 		break; | 
 |  | 
 | 	case GetPortStatus: | 
 | 		dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n", | 
 | 		    wIndex, USBH_PORTSTAT(wIndex - 1)); | 
 | 		*(__le32 *) buf = readl(imx21->regs + | 
 | 			USBH_PORTSTAT(wIndex - 1)); | 
 | 		break; | 
 |  | 
 | 	case SetHubFeature: | 
 | 		dev_dbg(imx21->dev, "SetHubFeature\n"); | 
 | 		switch (wValue) { | 
 | 		case C_HUB_OVER_CURRENT: | 
 | 			dev_dbg(imx21->dev, "    OVER_CURRENT\n"); | 
 | 			break; | 
 |  | 
 | 		case C_HUB_LOCAL_POWER: | 
 | 			dev_dbg(imx21->dev, "    LOCAL_POWER\n"); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(imx21->dev, "    unknown\n"); | 
 | 			rc = -EINVAL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		break; | 
 |  | 
 | 	case SetPortFeature: | 
 | 		dev_dbg(imx21->dev, "SetPortFeature\n"); | 
 | 		switch (wValue) { | 
 | 		case USB_PORT_FEAT_SUSPEND: | 
 | 			dev_dbg(imx21->dev, "    SUSPEND\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTSUSPST; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_POWER: | 
 | 			dev_dbg(imx21->dev, "    POWER\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTPWRST; | 
 | 			break; | 
 | 		case USB_PORT_FEAT_RESET: | 
 | 			dev_dbg(imx21->dev, "    RESET\n"); | 
 | 			status_write = USBH_PORTSTAT_PRTRSTST; | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(imx21->dev, "    unknown\n"); | 
 | 			rc = -EINVAL; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		dev_dbg(imx21->dev, "  unknown\n"); | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (status_write) | 
 | 		writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1)); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* =========================================== */ | 
 | /* Host controller management 			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static int imx21_hc_reset(struct usb_hcd *hcd) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	unsigned long timeout; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	/* Reset the Host controller modules */ | 
 | 	writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH | | 
 | 		USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC, | 
 | 		imx21->regs + USBOTG_RST_CTRL); | 
 |  | 
 | 	/* Wait for reset to finish */ | 
 | 	timeout = jiffies + HZ; | 
 | 	while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) { | 
 | 		if (time_after(jiffies, timeout)) { | 
 | 			spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 			dev_err(imx21->dev, "timeout waiting for reset\n"); | 
 | 			return -ETIMEDOUT; | 
 | 		} | 
 | 		spin_unlock_irq(&imx21->lock); | 
 | 		schedule_timeout_uninterruptible(1); | 
 | 		spin_lock_irq(&imx21->lock); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int imx21_hc_start(struct usb_hcd *hcd) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	unsigned long flags; | 
 | 	int i, j; | 
 | 	u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST; | 
 | 	u32 usb_control = 0; | 
 |  | 
 | 	hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) & | 
 | 			USBOTG_HWMODE_HOSTXCVR_MASK); | 
 | 	hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) & | 
 | 			USBOTG_HWMODE_OTGXCVR_MASK); | 
 |  | 
 | 	if (imx21->pdata->host1_txenoe) | 
 | 		usb_control |= USBCTRL_HOST1_TXEN_OE; | 
 |  | 
 | 	if (!imx21->pdata->host1_xcverless) | 
 | 		usb_control |= USBCTRL_HOST1_BYP_TLL; | 
 |  | 
 | 	if (imx21->pdata->otg_ext_xcvr) | 
 | 		usb_control |= USBCTRL_OTC_RCV_RXDP; | 
 |  | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN), | 
 | 		imx21->regs + USBOTG_CLK_CTRL); | 
 | 	writel(hw_mode, imx21->regs + USBOTG_HWMODE); | 
 | 	writel(usb_control, imx21->regs + USBCTRL); | 
 | 	writel(USB_MISCCONTROL_SKPRTRY  | USB_MISCCONTROL_ARBMODE, | 
 | 		imx21->regs + USB_MISCCONTROL); | 
 |  | 
 | 	/* Clear the ETDs */ | 
 | 	for (i = 0; i < USB_NUM_ETD; i++) | 
 | 		for (j = 0; j < 4; j++) | 
 | 			etd_writel(imx21, i, j, 0); | 
 |  | 
 | 	/* Take the HC out of reset */ | 
 | 	writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1, | 
 | 		imx21->regs + USBH_HOST_CTRL); | 
 |  | 
 | 	/* Enable ports */ | 
 | 	if (imx21->pdata->enable_otg_host) | 
 | 		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, | 
 | 			imx21->regs + USBH_PORTSTAT(0)); | 
 |  | 
 | 	if (imx21->pdata->enable_host1) | 
 | 		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, | 
 | 			imx21->regs + USBH_PORTSTAT(1)); | 
 |  | 
 | 	if (imx21->pdata->enable_host2) | 
 | 		writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, | 
 | 			imx21->regs + USBH_PORTSTAT(2)); | 
 |  | 
 |  | 
 | 	hcd->state = HC_STATE_RUNNING; | 
 |  | 
 | 	/* Enable host controller interrupts */ | 
 | 	set_register_bits(imx21, USBH_SYSIEN, | 
 | 		USBH_SYSIEN_HERRINT | | 
 | 		USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT); | 
 | 	set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); | 
 |  | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void imx21_hc_stop(struct usb_hcd *hcd) | 
 | { | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&imx21->lock, flags); | 
 |  | 
 | 	writel(0, imx21->regs + USBH_SYSIEN); | 
 | 	clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); | 
 | 	clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN, | 
 | 					USBOTG_CLK_CTRL); | 
 | 	spin_unlock_irqrestore(&imx21->lock, flags); | 
 | } | 
 |  | 
 | /* =========================================== */ | 
 | /* Driver glue		 			*/ | 
 | /* =========================================== */ | 
 |  | 
 | static const struct hc_driver imx21_hc_driver = { | 
 | 	.description = hcd_name, | 
 | 	.product_desc = "IMX21 USB Host Controller", | 
 | 	.hcd_priv_size = sizeof(struct imx21), | 
 |  | 
 | 	.flags = HCD_USB11, | 
 | 	.irq = imx21_irq, | 
 |  | 
 | 	.reset = imx21_hc_reset, | 
 | 	.start = imx21_hc_start, | 
 | 	.stop = imx21_hc_stop, | 
 |  | 
 | 	/* I/O requests */ | 
 | 	.urb_enqueue = imx21_hc_urb_enqueue, | 
 | 	.urb_dequeue = imx21_hc_urb_dequeue, | 
 | 	.endpoint_disable = imx21_hc_endpoint_disable, | 
 |  | 
 | 	/* scheduling support */ | 
 | 	.get_frame_number = imx21_hc_get_frame, | 
 |  | 
 | 	/* Root hub support */ | 
 | 	.hub_status_data = imx21_hc_hub_status_data, | 
 | 	.hub_control = imx21_hc_hub_control, | 
 |  | 
 | }; | 
 |  | 
 | static struct mx21_usbh_platform_data default_pdata = { | 
 | 	.host_xcvr = MX21_USBXCVR_TXDIF_RXDIF, | 
 | 	.otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF, | 
 | 	.enable_host1 = 1, | 
 | 	.enable_host2 = 1, | 
 | 	.enable_otg_host = 1, | 
 |  | 
 | }; | 
 |  | 
 | static int imx21_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
 | 	struct imx21 *imx21 = hcd_to_imx21(hcd); | 
 | 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 |  | 
 | 	remove_debug_files(imx21); | 
 | 	usb_remove_hcd(hcd); | 
 |  | 
 | 	if (res != NULL) { | 
 | 		clk_disable_unprepare(imx21->clk); | 
 | 		clk_put(imx21->clk); | 
 | 		iounmap(imx21->regs); | 
 | 		release_mem_region(res->start, resource_size(res)); | 
 | 	} | 
 |  | 
 | 	kfree(hcd); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int imx21_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct usb_hcd *hcd; | 
 | 	struct imx21 *imx21; | 
 | 	struct resource *res; | 
 | 	int ret; | 
 | 	int irq; | 
 |  | 
 | 	printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc); | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) | 
 | 		return -ENODEV; | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) { | 
 | 		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); | 
 | 		return irq; | 
 | 	} | 
 |  | 
 | 	hcd = usb_create_hcd(&imx21_hc_driver, | 
 | 		&pdev->dev, dev_name(&pdev->dev)); | 
 | 	if (hcd == NULL) { | 
 | 		dev_err(&pdev->dev, "Cannot create hcd (%s)\n", | 
 | 		    dev_name(&pdev->dev)); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	imx21 = hcd_to_imx21(hcd); | 
 | 	imx21->hcd = hcd; | 
 | 	imx21->dev = &pdev->dev; | 
 | 	imx21->pdata = dev_get_platdata(&pdev->dev); | 
 | 	if (!imx21->pdata) | 
 | 		imx21->pdata = &default_pdata; | 
 |  | 
 | 	spin_lock_init(&imx21->lock); | 
 | 	INIT_LIST_HEAD(&imx21->dmem_list); | 
 | 	INIT_LIST_HEAD(&imx21->queue_for_etd); | 
 | 	INIT_LIST_HEAD(&imx21->queue_for_dmem); | 
 | 	create_debug_files(imx21); | 
 |  | 
 | 	res = request_mem_region(res->start, resource_size(res), hcd_name); | 
 | 	if (!res) { | 
 | 		ret = -EBUSY; | 
 | 		goto failed_request_mem; | 
 | 	} | 
 |  | 
 | 	imx21->regs = ioremap(res->start, resource_size(res)); | 
 | 	if (imx21->regs == NULL) { | 
 | 		dev_err(imx21->dev, "Cannot map registers\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto failed_ioremap; | 
 | 	} | 
 |  | 
 | 	/* Enable clocks source */ | 
 | 	imx21->clk = clk_get(imx21->dev, NULL); | 
 | 	if (IS_ERR(imx21->clk)) { | 
 | 		dev_err(imx21->dev, "no clock found\n"); | 
 | 		ret = PTR_ERR(imx21->clk); | 
 | 		goto failed_clock_get; | 
 | 	} | 
 |  | 
 | 	ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000)); | 
 | 	if (ret) | 
 | 		goto failed_clock_set; | 
 | 	ret = clk_prepare_enable(imx21->clk); | 
 | 	if (ret) | 
 | 		goto failed_clock_enable; | 
 |  | 
 | 	dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n", | 
 | 		(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF); | 
 |  | 
 | 	ret = usb_add_hcd(hcd, irq, 0); | 
 | 	if (ret != 0) { | 
 | 		dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); | 
 | 		goto failed_add_hcd; | 
 | 	} | 
 | 	device_wakeup_enable(hcd->self.controller); | 
 |  | 
 | 	return 0; | 
 |  | 
 | failed_add_hcd: | 
 | 	clk_disable_unprepare(imx21->clk); | 
 | failed_clock_enable: | 
 | failed_clock_set: | 
 | 	clk_put(imx21->clk); | 
 | failed_clock_get: | 
 | 	iounmap(imx21->regs); | 
 | failed_ioremap: | 
 | 	release_mem_region(res->start, resource_size(res)); | 
 | failed_request_mem: | 
 | 	remove_debug_files(imx21); | 
 | 	usb_put_hcd(hcd); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct platform_driver imx21_hcd_driver = { | 
 | 	.driver = { | 
 | 		   .name = hcd_name, | 
 | 		   }, | 
 | 	.probe = imx21_probe, | 
 | 	.remove = imx21_remove, | 
 | 	.suspend = NULL, | 
 | 	.resume = NULL, | 
 | }; | 
 |  | 
 | module_platform_driver(imx21_hcd_driver); | 
 |  | 
 | MODULE_DESCRIPTION("i.MX21 USB Host controller"); | 
 | MODULE_AUTHOR("Martin Fuzzey"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:imx21-hcd"); |