|  | /* | 
|  | * rio_cm - RapidIO Channelized Messaging Driver | 
|  | * | 
|  | * Copyright 2013-2016 Integrated Device Technology, Inc. | 
|  | * Copyright (c) 2015, Prodrive Technologies | 
|  | * Copyright (c) 2015, RapidIO Trade Association | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | * | 
|  | * THIS PROGRAM IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, | 
|  | * BUT WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED WARRANTY OF | 
|  | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  SEE THE | 
|  | * GNU GENERAL PUBLIC LICENSE FOR MORE DETAILS. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/rio.h> | 
|  | #include <linux/rio_drv.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/cdev.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/printk.h> | 
|  | #include <linux/rio_cm_cdev.h> | 
|  |  | 
|  | #define DRV_NAME        "rio_cm" | 
|  | #define DRV_VERSION     "1.0.0" | 
|  | #define DRV_AUTHOR      "Alexandre Bounine <alexandre.bounine@idt.com>" | 
|  | #define DRV_DESC        "RapidIO Channelized Messaging Driver" | 
|  | #define DEV_NAME	"rio_cm" | 
|  |  | 
|  | /* Debug output filtering masks */ | 
|  | enum { | 
|  | DBG_NONE	= 0, | 
|  | DBG_INIT	= BIT(0), /* driver init */ | 
|  | DBG_EXIT	= BIT(1), /* driver exit */ | 
|  | DBG_MPORT	= BIT(2), /* mport add/remove */ | 
|  | DBG_RDEV	= BIT(3), /* RapidIO device add/remove */ | 
|  | DBG_CHOP	= BIT(4), /* channel operations */ | 
|  | DBG_WAIT	= BIT(5), /* waiting for events */ | 
|  | DBG_TX		= BIT(6), /* message TX */ | 
|  | DBG_TX_EVENT	= BIT(7), /* message TX event */ | 
|  | DBG_RX_DATA	= BIT(8), /* inbound data messages */ | 
|  | DBG_RX_CMD	= BIT(9), /* inbound REQ/ACK/NACK messages */ | 
|  | DBG_ALL		= ~0, | 
|  | }; | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define riocm_debug(level, fmt, arg...) \ | 
|  | do { \ | 
|  | if (DBG_##level & dbg_level) \ | 
|  | pr_debug(DRV_NAME ": %s " fmt "\n", \ | 
|  | __func__, ##arg); \ | 
|  | } while (0) | 
|  | #else | 
|  | #define riocm_debug(level, fmt, arg...) \ | 
|  | no_printk(KERN_DEBUG pr_fmt(DRV_NAME fmt "\n"), ##arg) | 
|  | #endif | 
|  |  | 
|  | #define riocm_warn(fmt, arg...) \ | 
|  | pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg) | 
|  |  | 
|  | #define riocm_error(fmt, arg...) \ | 
|  | pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg) | 
|  |  | 
|  |  | 
|  | static int cmbox = 1; | 
|  | module_param(cmbox, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(cmbox, "RapidIO Mailbox number (default 1)"); | 
|  |  | 
|  | static int chstart = 256; | 
|  | module_param(chstart, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(chstart, | 
|  | "Start channel number for dynamic allocation (default 256)"); | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static u32 dbg_level = DBG_NONE; | 
|  | module_param(dbg_level, uint, S_IWUSR | S_IRUGO); | 
|  | MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)"); | 
|  | #endif | 
|  |  | 
|  | MODULE_AUTHOR(DRV_AUTHOR); | 
|  | MODULE_DESCRIPTION(DRV_DESC); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  |  | 
|  | #define RIOCM_TX_RING_SIZE	128 | 
|  | #define RIOCM_RX_RING_SIZE	128 | 
|  | #define RIOCM_CONNECT_TO	3 /* connect response TO (in sec) */ | 
|  |  | 
|  | #define RIOCM_MAX_CHNUM		0xffff /* Use full range of u16 field */ | 
|  | #define RIOCM_CHNUM_AUTO	0 | 
|  | #define RIOCM_MAX_EP_COUNT	0x10000 /* Max number of endpoints */ | 
|  |  | 
|  | enum rio_cm_state { | 
|  | RIO_CM_IDLE, | 
|  | RIO_CM_CONNECT, | 
|  | RIO_CM_CONNECTED, | 
|  | RIO_CM_DISCONNECT, | 
|  | RIO_CM_CHAN_BOUND, | 
|  | RIO_CM_LISTEN, | 
|  | RIO_CM_DESTROYING, | 
|  | }; | 
|  |  | 
|  | enum rio_cm_pkt_type { | 
|  | RIO_CM_SYS	= 0xaa, | 
|  | RIO_CM_CHAN	= 0x55, | 
|  | }; | 
|  |  | 
|  | enum rio_cm_chop { | 
|  | CM_CONN_REQ, | 
|  | CM_CONN_ACK, | 
|  | CM_CONN_CLOSE, | 
|  | CM_DATA_MSG, | 
|  | }; | 
|  |  | 
|  | struct rio_ch_base_bhdr { | 
|  | u32 src_id; | 
|  | u32 dst_id; | 
|  | #define RIO_HDR_LETTER_MASK 0xffff0000 | 
|  | #define RIO_HDR_MBOX_MASK   0x0000ffff | 
|  | u8  src_mbox; | 
|  | u8  dst_mbox; | 
|  | u8  type; | 
|  | } __attribute__((__packed__)); | 
|  |  | 
|  | struct rio_ch_chan_hdr { | 
|  | struct rio_ch_base_bhdr bhdr; | 
|  | u8 ch_op; | 
|  | u16 dst_ch; | 
|  | u16 src_ch; | 
|  | u16 msg_len; | 
|  | u16 rsrvd; | 
|  | } __attribute__((__packed__)); | 
|  |  | 
|  | struct tx_req { | 
|  | struct list_head node; | 
|  | struct rio_dev   *rdev; | 
|  | void		 *buffer; | 
|  | size_t		 len; | 
|  | }; | 
|  |  | 
|  | struct cm_dev { | 
|  | struct list_head	list; | 
|  | struct rio_mport	*mport; | 
|  | void			*rx_buf[RIOCM_RX_RING_SIZE]; | 
|  | int			rx_slots; | 
|  | struct mutex		rx_lock; | 
|  |  | 
|  | void			*tx_buf[RIOCM_TX_RING_SIZE]; | 
|  | int			tx_slot; | 
|  | int			tx_cnt; | 
|  | int			tx_ack_slot; | 
|  | struct list_head	tx_reqs; | 
|  | spinlock_t		tx_lock; | 
|  |  | 
|  | struct list_head	peers; | 
|  | u32			npeers; | 
|  | struct workqueue_struct *rx_wq; | 
|  | struct work_struct	rx_work; | 
|  | }; | 
|  |  | 
|  | struct chan_rx_ring { | 
|  | void	*buf[RIOCM_RX_RING_SIZE]; | 
|  | int	head; | 
|  | int	tail; | 
|  | int	count; | 
|  |  | 
|  | /* Tracking RX buffers reported to upper level */ | 
|  | void	*inuse[RIOCM_RX_RING_SIZE]; | 
|  | int	inuse_cnt; | 
|  | }; | 
|  |  | 
|  | struct rio_channel { | 
|  | u16			id;	/* local channel ID */ | 
|  | struct kref		ref;	/* channel refcount */ | 
|  | struct file		*filp; | 
|  | struct cm_dev		*cmdev;	/* associated CM device object */ | 
|  | struct rio_dev		*rdev;	/* remote RapidIO device */ | 
|  | enum rio_cm_state	state; | 
|  | int			error; | 
|  | spinlock_t		lock; | 
|  | void			*context; | 
|  | u32			loc_destid;	/* local destID */ | 
|  | u32			rem_destid;	/* remote destID */ | 
|  | u16			rem_channel;	/* remote channel ID */ | 
|  | struct list_head	accept_queue; | 
|  | struct list_head	ch_node; | 
|  | struct completion	comp; | 
|  | struct completion	comp_close; | 
|  | struct chan_rx_ring	rx_ring; | 
|  | }; | 
|  |  | 
|  | struct cm_peer { | 
|  | struct list_head node; | 
|  | struct rio_dev *rdev; | 
|  | }; | 
|  |  | 
|  | struct rio_cm_work { | 
|  | struct work_struct work; | 
|  | struct cm_dev *cm; | 
|  | void *data; | 
|  | }; | 
|  |  | 
|  | struct conn_req { | 
|  | struct list_head node; | 
|  | u32 destid;	/* requester destID */ | 
|  | u16 chan;	/* requester channel ID */ | 
|  | struct cm_dev *cmdev; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * A channel_dev structure represents a CM_CDEV | 
|  | * @cdev	Character device | 
|  | * @dev		Associated device object | 
|  | */ | 
|  | struct channel_dev { | 
|  | struct cdev	cdev; | 
|  | struct device	*dev; | 
|  | }; | 
|  |  | 
|  | static struct rio_channel *riocm_ch_alloc(u16 ch_num); | 
|  | static void riocm_ch_free(struct kref *ref); | 
|  | static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, | 
|  | void *buffer, size_t len); | 
|  | static int riocm_ch_close(struct rio_channel *ch); | 
|  |  | 
|  | static DEFINE_SPINLOCK(idr_lock); | 
|  | static DEFINE_IDR(ch_idr); | 
|  |  | 
|  | static LIST_HEAD(cm_dev_list); | 
|  | static DECLARE_RWSEM(rdev_sem); | 
|  |  | 
|  | static struct class *dev_class; | 
|  | static unsigned int dev_major; | 
|  | static unsigned int dev_minor_base; | 
|  | static dev_t dev_number; | 
|  | static struct channel_dev riocm_cdev; | 
|  |  | 
|  | #define is_msg_capable(src_ops, dst_ops)			\ | 
|  | ((src_ops & RIO_SRC_OPS_DATA_MSG) &&	\ | 
|  | (dst_ops & RIO_DST_OPS_DATA_MSG)) | 
|  | #define dev_cm_capable(dev) \ | 
|  | is_msg_capable(dev->src_ops, dev->dst_ops) | 
|  |  | 
|  | static int riocm_cmp(struct rio_channel *ch, enum rio_cm_state cmp) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  | ret = (ch->state == cmp); | 
|  | spin_unlock_bh(&ch->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int riocm_cmp_exch(struct rio_channel *ch, | 
|  | enum rio_cm_state cmp, enum rio_cm_state exch) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  | ret = (ch->state == cmp); | 
|  | if (ret) | 
|  | ch->state = exch; | 
|  | spin_unlock_bh(&ch->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static enum rio_cm_state riocm_exch(struct rio_channel *ch, | 
|  | enum rio_cm_state exch) | 
|  | { | 
|  | enum rio_cm_state old; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  | old = ch->state; | 
|  | ch->state = exch; | 
|  | spin_unlock_bh(&ch->lock); | 
|  | return old; | 
|  | } | 
|  |  | 
|  | static struct rio_channel *riocm_get_channel(u16 nr) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | spin_lock_bh(&idr_lock); | 
|  | ch = idr_find(&ch_idr, nr); | 
|  | if (ch) | 
|  | kref_get(&ch->ref); | 
|  | spin_unlock_bh(&idr_lock); | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | static void riocm_put_channel(struct rio_channel *ch) | 
|  | { | 
|  | kref_put(&ch->ref, riocm_ch_free); | 
|  | } | 
|  |  | 
|  | static void *riocm_rx_get_msg(struct cm_dev *cm) | 
|  | { | 
|  | void *msg; | 
|  | int i; | 
|  |  | 
|  | msg = rio_get_inb_message(cm->mport, cmbox); | 
|  | if (msg) { | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { | 
|  | if (cm->rx_buf[i] == msg) { | 
|  | cm->rx_buf[i] = NULL; | 
|  | cm->rx_slots++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i == RIOCM_RX_RING_SIZE) | 
|  | riocm_warn("no record for buffer 0x%p", msg); | 
|  | } | 
|  |  | 
|  | return msg; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_rx_fill - fills a ring of receive buffers for given cm device | 
|  | * @cm: cm_dev object | 
|  | * @nent: max number of entries to fill | 
|  | * | 
|  | * Returns: none | 
|  | */ | 
|  | static void riocm_rx_fill(struct cm_dev *cm, int nent) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (cm->rx_slots == 0) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE && cm->rx_slots && nent; i++) { | 
|  | if (cm->rx_buf[i] == NULL) { | 
|  | cm->rx_buf[i] = kmalloc(RIO_MAX_MSG_SIZE, GFP_KERNEL); | 
|  | if (cm->rx_buf[i] == NULL) | 
|  | break; | 
|  | rio_add_inb_buffer(cm->mport, cmbox, cm->rx_buf[i]); | 
|  | cm->rx_slots--; | 
|  | nent--; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_rx_free - frees all receive buffers associated with given cm device | 
|  | * @cm: cm_dev object | 
|  | * | 
|  | * Returns: none | 
|  | */ | 
|  | static void riocm_rx_free(struct cm_dev *cm) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { | 
|  | if (cm->rx_buf[i] != NULL) { | 
|  | kfree(cm->rx_buf[i]); | 
|  | cm->rx_buf[i] = NULL; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_req_handler - connection request handler | 
|  | * @cm: cm_dev object | 
|  | * @req_data: pointer to the request packet | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -EINVAL if channel is not in correct state, | 
|  | *          -ENODEV if cannot find a channel with specified ID, | 
|  | *          -ENOMEM if unable to allocate memory to store the request | 
|  | */ | 
|  | static int riocm_req_handler(struct cm_dev *cm, void *req_data) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | struct conn_req *req; | 
|  | struct rio_ch_chan_hdr *hh = req_data; | 
|  | u16 chnum; | 
|  |  | 
|  | chnum = ntohs(hh->dst_ch); | 
|  |  | 
|  | ch = riocm_get_channel(chnum); | 
|  |  | 
|  | if (!ch) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (ch->state != RIO_CM_LISTEN) { | 
|  | riocm_debug(RX_CMD, "channel %d is not in listen state", chnum); | 
|  | riocm_put_channel(ch); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | req = kzalloc(sizeof(*req), GFP_KERNEL); | 
|  | if (!req) { | 
|  | riocm_put_channel(ch); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | req->destid = ntohl(hh->bhdr.src_id); | 
|  | req->chan = ntohs(hh->src_ch); | 
|  | req->cmdev = cm; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  | list_add_tail(&req->node, &ch->accept_queue); | 
|  | spin_unlock_bh(&ch->lock); | 
|  | complete(&ch->comp); | 
|  | riocm_put_channel(ch); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_resp_handler - response to connection request handler | 
|  | * @resp_data: pointer to the response packet | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -EINVAL if channel is not in correct state, | 
|  | *          -ENODEV if cannot find a channel with specified ID, | 
|  | */ | 
|  | static int riocm_resp_handler(void *resp_data) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | struct rio_ch_chan_hdr *hh = resp_data; | 
|  | u16 chnum; | 
|  |  | 
|  | chnum = ntohs(hh->dst_ch); | 
|  | ch = riocm_get_channel(chnum); | 
|  | if (!ch) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (ch->state != RIO_CM_CONNECT) { | 
|  | riocm_put_channel(ch); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | riocm_exch(ch, RIO_CM_CONNECTED); | 
|  | ch->rem_channel = ntohs(hh->src_ch); | 
|  | complete(&ch->comp); | 
|  | riocm_put_channel(ch); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_close_handler - channel close request handler | 
|  | * @req_data: pointer to the request packet | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -ENODEV if cannot find a channel with specified ID, | 
|  | *            + error codes returned by riocm_ch_close. | 
|  | */ | 
|  | static int riocm_close_handler(void *data) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | struct rio_ch_chan_hdr *hh = data; | 
|  | int ret; | 
|  |  | 
|  | riocm_debug(RX_CMD, "for ch=%d", ntohs(hh->dst_ch)); | 
|  |  | 
|  | spin_lock_bh(&idr_lock); | 
|  | ch = idr_find(&ch_idr, ntohs(hh->dst_ch)); | 
|  | if (!ch) { | 
|  | spin_unlock_bh(&idr_lock); | 
|  | return -ENODEV; | 
|  | } | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | riocm_exch(ch, RIO_CM_DISCONNECT); | 
|  |  | 
|  | ret = riocm_ch_close(ch); | 
|  | if (ret) | 
|  | riocm_debug(RX_CMD, "riocm_ch_close() returned %d", ret); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rio_cm_handler - function that services request (non-data) packets | 
|  | * @cm: cm_dev object | 
|  | * @data: pointer to the packet | 
|  | */ | 
|  | static void rio_cm_handler(struct cm_dev *cm, void *data) | 
|  | { | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  |  | 
|  | if (!rio_mport_is_running(cm->mport)) | 
|  | goto out; | 
|  |  | 
|  | hdr = data; | 
|  |  | 
|  | riocm_debug(RX_CMD, "OP=%x for ch=%d from %d", | 
|  | hdr->ch_op, ntohs(hdr->dst_ch), ntohs(hdr->src_ch)); | 
|  |  | 
|  | switch (hdr->ch_op) { | 
|  | case CM_CONN_REQ: | 
|  | riocm_req_handler(cm, data); | 
|  | break; | 
|  | case CM_CONN_ACK: | 
|  | riocm_resp_handler(data); | 
|  | break; | 
|  | case CM_CONN_CLOSE: | 
|  | riocm_close_handler(data); | 
|  | break; | 
|  | default: | 
|  | riocm_error("Invalid packet header"); | 
|  | break; | 
|  | } | 
|  | out: | 
|  | kfree(data); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rio_rx_data_handler - received data packet handler | 
|  | * @cm: cm_dev object | 
|  | * @buf: data packet | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -ENODEV if cannot find a channel with specified ID, | 
|  | *          -EIO if channel is not in CONNECTED state, | 
|  | *          -ENOMEM if channel RX queue is full (packet discarded) | 
|  | */ | 
|  | static int rio_rx_data_handler(struct cm_dev *cm, void *buf) | 
|  | { | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | hdr = buf; | 
|  |  | 
|  | riocm_debug(RX_DATA, "for ch=%d", ntohs(hdr->dst_ch)); | 
|  |  | 
|  | ch = riocm_get_channel(ntohs(hdr->dst_ch)); | 
|  | if (!ch) { | 
|  | /* Discard data message for non-existing channel */ | 
|  | kfree(buf); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* Place pointer to the buffer into channel's RX queue */ | 
|  | spin_lock(&ch->lock); | 
|  |  | 
|  | if (ch->state != RIO_CM_CONNECTED) { | 
|  | /* Channel is not ready to receive data, discard a packet */ | 
|  | riocm_debug(RX_DATA, "ch=%d is in wrong state=%d", | 
|  | ch->id, ch->state); | 
|  | spin_unlock(&ch->lock); | 
|  | kfree(buf); | 
|  | riocm_put_channel(ch); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (ch->rx_ring.count == RIOCM_RX_RING_SIZE) { | 
|  | /* If RX ring is full, discard a packet */ | 
|  | riocm_debug(RX_DATA, "ch=%d is full", ch->id); | 
|  | spin_unlock(&ch->lock); | 
|  | kfree(buf); | 
|  | riocm_put_channel(ch); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ch->rx_ring.buf[ch->rx_ring.head] = buf; | 
|  | ch->rx_ring.head++; | 
|  | ch->rx_ring.count++; | 
|  | ch->rx_ring.head %= RIOCM_RX_RING_SIZE; | 
|  |  | 
|  | complete(&ch->comp); | 
|  |  | 
|  | spin_unlock(&ch->lock); | 
|  | riocm_put_channel(ch); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rio_ibmsg_handler - inbound message packet handler | 
|  | */ | 
|  | static void rio_ibmsg_handler(struct work_struct *work) | 
|  | { | 
|  | struct cm_dev *cm = container_of(work, struct cm_dev, rx_work); | 
|  | void *data; | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  |  | 
|  | if (!rio_mport_is_running(cm->mport)) | 
|  | return; | 
|  |  | 
|  | while (1) { | 
|  | mutex_lock(&cm->rx_lock); | 
|  | data = riocm_rx_get_msg(cm); | 
|  | if (data) | 
|  | riocm_rx_fill(cm, 1); | 
|  | mutex_unlock(&cm->rx_lock); | 
|  |  | 
|  | if (data == NULL) | 
|  | break; | 
|  |  | 
|  | hdr = data; | 
|  |  | 
|  | if (hdr->bhdr.type != RIO_CM_CHAN) { | 
|  | /* For now simply discard packets other than channel */ | 
|  | riocm_error("Unsupported TYPE code (0x%x). Msg dropped", | 
|  | hdr->bhdr.type); | 
|  | kfree(data); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Process a channel message */ | 
|  | if (hdr->ch_op == CM_DATA_MSG) | 
|  | rio_rx_data_handler(cm, data); | 
|  | else | 
|  | rio_cm_handler(cm, data); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void riocm_inb_msg_event(struct rio_mport *mport, void *dev_id, | 
|  | int mbox, int slot) | 
|  | { | 
|  | struct cm_dev *cm = dev_id; | 
|  |  | 
|  | if (rio_mport_is_running(cm->mport) && !work_pending(&cm->rx_work)) | 
|  | queue_work(cm->rx_wq, &cm->rx_work); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * rio_txcq_handler - TX completion handler | 
|  | * @cm: cm_dev object | 
|  | * @slot: TX queue slot | 
|  | * | 
|  | * TX completion handler also ensures that pending request packets are placed | 
|  | * into transmit queue as soon as a free slot becomes available. This is done | 
|  | * to give higher priority to request packets during high intensity data flow. | 
|  | */ | 
|  | static void rio_txcq_handler(struct cm_dev *cm, int slot) | 
|  | { | 
|  | int ack_slot; | 
|  |  | 
|  | /* ATTN: Add TX completion notification if/when direct buffer | 
|  | * transfer is implemented. At this moment only correct tracking | 
|  | * of tx_count is important. | 
|  | */ | 
|  | riocm_debug(TX_EVENT, "for mport_%d slot %d tx_cnt %d", | 
|  | cm->mport->id, slot, cm->tx_cnt); | 
|  |  | 
|  | spin_lock(&cm->tx_lock); | 
|  | ack_slot = cm->tx_ack_slot; | 
|  |  | 
|  | if (ack_slot == slot) | 
|  | riocm_debug(TX_EVENT, "slot == ack_slot"); | 
|  |  | 
|  | while (cm->tx_cnt && ((ack_slot != slot) || | 
|  | (cm->tx_cnt == RIOCM_TX_RING_SIZE))) { | 
|  |  | 
|  | cm->tx_buf[ack_slot] = NULL; | 
|  | ++ack_slot; | 
|  | ack_slot &= (RIOCM_TX_RING_SIZE - 1); | 
|  | cm->tx_cnt--; | 
|  | } | 
|  |  | 
|  | if (cm->tx_cnt < 0 || cm->tx_cnt > RIOCM_TX_RING_SIZE) | 
|  | riocm_error("tx_cnt %d out of sync", cm->tx_cnt); | 
|  |  | 
|  | WARN_ON((cm->tx_cnt < 0) || (cm->tx_cnt > RIOCM_TX_RING_SIZE)); | 
|  |  | 
|  | cm->tx_ack_slot = ack_slot; | 
|  |  | 
|  | /* | 
|  | * If there are pending requests, insert them into transmit queue | 
|  | */ | 
|  | if (!list_empty(&cm->tx_reqs) && (cm->tx_cnt < RIOCM_TX_RING_SIZE)) { | 
|  | struct tx_req *req, *_req; | 
|  | int rc; | 
|  |  | 
|  | list_for_each_entry_safe(req, _req, &cm->tx_reqs, node) { | 
|  | list_del(&req->node); | 
|  | cm->tx_buf[cm->tx_slot] = req->buffer; | 
|  | rc = rio_add_outb_message(cm->mport, req->rdev, cmbox, | 
|  | req->buffer, req->len); | 
|  | kfree(req->buffer); | 
|  | kfree(req); | 
|  |  | 
|  | ++cm->tx_cnt; | 
|  | ++cm->tx_slot; | 
|  | cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); | 
|  | if (cm->tx_cnt == RIOCM_TX_RING_SIZE) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock(&cm->tx_lock); | 
|  | } | 
|  |  | 
|  | static void riocm_outb_msg_event(struct rio_mport *mport, void *dev_id, | 
|  | int mbox, int slot) | 
|  | { | 
|  | struct cm_dev *cm = dev_id; | 
|  |  | 
|  | if (cm && rio_mport_is_running(cm->mport)) | 
|  | rio_txcq_handler(cm, slot); | 
|  | } | 
|  |  | 
|  | static int riocm_queue_req(struct cm_dev *cm, struct rio_dev *rdev, | 
|  | void *buffer, size_t len) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct tx_req *treq; | 
|  |  | 
|  | treq = kzalloc(sizeof(*treq), GFP_KERNEL); | 
|  | if (treq == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | treq->rdev = rdev; | 
|  | treq->buffer = buffer; | 
|  | treq->len = len; | 
|  |  | 
|  | spin_lock_irqsave(&cm->tx_lock, flags); | 
|  | list_add_tail(&treq->node, &cm->tx_reqs); | 
|  | spin_unlock_irqrestore(&cm->tx_lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_post_send - helper function that places packet into msg TX queue | 
|  | * @cm: cm_dev object | 
|  | * @rdev: target RapidIO device object (required by outbound msg interface) | 
|  | * @buffer: pointer to a packet buffer to send | 
|  | * @len: length of data to transfer | 
|  | * @req: request priority flag | 
|  | * | 
|  | * Returns: 0 if success, or error code otherwise. | 
|  | */ | 
|  | static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev, | 
|  | void *buffer, size_t len) | 
|  | { | 
|  | int rc; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&cm->tx_lock, flags); | 
|  |  | 
|  | if (cm->mport == NULL) { | 
|  | rc = -ENODEV; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | if (cm->tx_cnt == RIOCM_TX_RING_SIZE) { | 
|  | riocm_debug(TX, "Tx Queue is full"); | 
|  | rc = -EBUSY; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | cm->tx_buf[cm->tx_slot] = buffer; | 
|  | rc = rio_add_outb_message(cm->mport, rdev, cmbox, buffer, len); | 
|  |  | 
|  | riocm_debug(TX, "Add buf@%p destid=%x tx_slot=%d tx_cnt=%d", | 
|  | buffer, rdev->destid, cm->tx_slot, cm->tx_cnt); | 
|  |  | 
|  | ++cm->tx_cnt; | 
|  | ++cm->tx_slot; | 
|  | cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1); | 
|  |  | 
|  | err_out: | 
|  | spin_unlock_irqrestore(&cm->tx_lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_send - sends a data packet to a remote device | 
|  | * @ch_id: local channel ID | 
|  | * @buf: pointer to a data buffer to send (including CM header) | 
|  | * @len: length of data to transfer (including CM header) | 
|  | * | 
|  | * ATTN: ASSUMES THAT THE HEADER SPACE IS RESERVED PART OF THE DATA PACKET | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -EINVAL if one or more input parameters is/are not valid, | 
|  | *          -ENODEV if cannot find a channel with specified ID, | 
|  | *          -EAGAIN if a channel is not in CONNECTED state, | 
|  | *	    + error codes returned by HW send routine. | 
|  | */ | 
|  | static int riocm_ch_send(u16 ch_id, void *buf, int len) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  | int ret; | 
|  |  | 
|  | if (buf == NULL || ch_id == 0 || len == 0 || len > RIO_MAX_MSG_SIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | ch = riocm_get_channel(ch_id); | 
|  | if (!ch) { | 
|  | riocm_error("%s(%d) ch_%d not found", current->comm, | 
|  | task_pid_nr(current), ch_id); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { | 
|  | ret = -EAGAIN; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fill buffer header section with corresponding channel data | 
|  | */ | 
|  | hdr = buf; | 
|  |  | 
|  | hdr->bhdr.src_id = htonl(ch->loc_destid); | 
|  | hdr->bhdr.dst_id = htonl(ch->rem_destid); | 
|  | hdr->bhdr.src_mbox = cmbox; | 
|  | hdr->bhdr.dst_mbox = cmbox; | 
|  | hdr->bhdr.type = RIO_CM_CHAN; | 
|  | hdr->ch_op = CM_DATA_MSG; | 
|  | hdr->dst_ch = htons(ch->rem_channel); | 
|  | hdr->src_ch = htons(ch->id); | 
|  | hdr->msg_len = htons((u16)len); | 
|  |  | 
|  | /* ATTN: the function call below relies on the fact that underlying | 
|  | * HW-specific add_outb_message() routine copies TX data into its own | 
|  | * internal transfer buffer (true for all RIONET compatible mport | 
|  | * drivers). Must be reviewed if mport driver uses the buffer directly. | 
|  | */ | 
|  |  | 
|  | ret = riocm_post_send(ch->cmdev, ch->rdev, buf, len); | 
|  | if (ret) | 
|  | riocm_debug(TX, "ch %d send_err=%d", ch->id, ret); | 
|  | err_out: | 
|  | riocm_put_channel(ch); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int riocm_ch_free_rxbuf(struct rio_channel *ch, void *buf) | 
|  | { | 
|  | int i, ret = -EINVAL; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  |  | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { | 
|  | if (ch->rx_ring.inuse[i] == buf) { | 
|  | ch->rx_ring.inuse[i] = NULL; | 
|  | ch->rx_ring.inuse_cnt--; | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ch->lock); | 
|  |  | 
|  | if (!ret) | 
|  | kfree(buf); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_receive - fetch a data packet received for the specified channel | 
|  | * @ch: local channel ID | 
|  | * @buf: pointer to a packet buffer | 
|  | * @timeout: timeout to wait for incoming packet (in jiffies) | 
|  | * | 
|  | * Returns: 0 and valid buffer pointer if success, or NULL pointer and one of: | 
|  | *          -EAGAIN if a channel is not in CONNECTED state, | 
|  | *          -ENOMEM if in-use tracking queue is full, | 
|  | *          -ETIME if wait timeout expired, | 
|  | *	    -EINTR if wait was interrupted. | 
|  | */ | 
|  | static int riocm_ch_receive(struct rio_channel *ch, void **buf, long timeout) | 
|  | { | 
|  | void *rxmsg = NULL; | 
|  | int i, ret = 0; | 
|  | long wret; | 
|  |  | 
|  | if (!riocm_cmp(ch, RIO_CM_CONNECTED)) { | 
|  | ret = -EAGAIN; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ch->rx_ring.inuse_cnt == RIOCM_RX_RING_SIZE) { | 
|  | /* If we do not have entries to track buffers given to upper | 
|  | * layer, reject request. | 
|  | */ | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wret = wait_for_completion_interruptible_timeout(&ch->comp, timeout); | 
|  |  | 
|  | riocm_debug(WAIT, "wait on %d returned %ld", ch->id, wret); | 
|  |  | 
|  | if (!wret) | 
|  | ret = -ETIME; | 
|  | else if (wret == -ERESTARTSYS) | 
|  | ret = -EINTR; | 
|  | else | 
|  | ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -ECONNRESET; | 
|  |  | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  |  | 
|  | rxmsg = ch->rx_ring.buf[ch->rx_ring.tail]; | 
|  | ch->rx_ring.buf[ch->rx_ring.tail] = NULL; | 
|  | ch->rx_ring.count--; | 
|  | ch->rx_ring.tail++; | 
|  | ch->rx_ring.tail %= RIOCM_RX_RING_SIZE; | 
|  | ret = -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE; i++) { | 
|  | if (ch->rx_ring.inuse[i] == NULL) { | 
|  | ch->rx_ring.inuse[i] = rxmsg; | 
|  | ch->rx_ring.inuse_cnt++; | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | /* We have no entry to store pending message: drop it */ | 
|  | kfree(rxmsg); | 
|  | rxmsg = NULL; | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ch->lock); | 
|  | out: | 
|  | *buf = rxmsg; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_connect - sends a connect request to a remote device | 
|  | * @loc_ch: local channel ID | 
|  | * @cm: CM device to send connect request | 
|  | * @peer: target RapidIO device | 
|  | * @rem_ch: remote channel ID | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -EINVAL if the channel is not in IDLE state, | 
|  | *          -EAGAIN if no connection request available immediately, | 
|  | *          -ETIME if ACK response timeout expired, | 
|  | *          -EINTR if wait for response was interrupted. | 
|  | */ | 
|  | static int riocm_ch_connect(u16 loc_ch, struct cm_dev *cm, | 
|  | struct cm_peer *peer, u16 rem_ch) | 
|  | { | 
|  | struct rio_channel *ch = NULL; | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  | int ret; | 
|  | long wret; | 
|  |  | 
|  | ch = riocm_get_channel(loc_ch); | 
|  | if (!ch) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!riocm_cmp_exch(ch, RIO_CM_IDLE, RIO_CM_CONNECT)) { | 
|  | ret = -EINVAL; | 
|  | goto conn_done; | 
|  | } | 
|  |  | 
|  | ch->cmdev = cm; | 
|  | ch->rdev = peer->rdev; | 
|  | ch->context = NULL; | 
|  | ch->loc_destid = cm->mport->host_deviceid; | 
|  | ch->rem_channel = rem_ch; | 
|  |  | 
|  | /* | 
|  | * Send connect request to the remote RapidIO device | 
|  | */ | 
|  |  | 
|  | hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); | 
|  | if (hdr == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto conn_done; | 
|  | } | 
|  |  | 
|  | hdr->bhdr.src_id = htonl(ch->loc_destid); | 
|  | hdr->bhdr.dst_id = htonl(peer->rdev->destid); | 
|  | hdr->bhdr.src_mbox = cmbox; | 
|  | hdr->bhdr.dst_mbox = cmbox; | 
|  | hdr->bhdr.type = RIO_CM_CHAN; | 
|  | hdr->ch_op = CM_CONN_REQ; | 
|  | hdr->dst_ch = htons(rem_ch); | 
|  | hdr->src_ch = htons(loc_ch); | 
|  |  | 
|  | /* ATTN: the function call below relies on the fact that underlying | 
|  | * HW-specific add_outb_message() routine copies TX data into its | 
|  | * internal transfer buffer. Must be reviewed if mport driver uses | 
|  | * this buffer directly. | 
|  | */ | 
|  | ret = riocm_post_send(cm, peer->rdev, hdr, sizeof(*hdr)); | 
|  |  | 
|  | if (ret != -EBUSY) { | 
|  | kfree(hdr); | 
|  | } else { | 
|  | ret = riocm_queue_req(cm, peer->rdev, hdr, sizeof(*hdr)); | 
|  | if (ret) | 
|  | kfree(hdr); | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | riocm_cmp_exch(ch, RIO_CM_CONNECT, RIO_CM_IDLE); | 
|  | goto conn_done; | 
|  | } | 
|  |  | 
|  | /* Wait for connect response from the remote device */ | 
|  | wret = wait_for_completion_interruptible_timeout(&ch->comp, | 
|  | RIOCM_CONNECT_TO * HZ); | 
|  | riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); | 
|  |  | 
|  | if (!wret) | 
|  | ret = -ETIME; | 
|  | else if (wret == -ERESTARTSYS) | 
|  | ret = -EINTR; | 
|  | else | 
|  | ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -1; | 
|  |  | 
|  | conn_done: | 
|  | riocm_put_channel(ch); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int riocm_send_ack(struct rio_channel *ch) | 
|  | { | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  | int ret; | 
|  |  | 
|  | hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); | 
|  | if (hdr == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hdr->bhdr.src_id = htonl(ch->loc_destid); | 
|  | hdr->bhdr.dst_id = htonl(ch->rem_destid); | 
|  | hdr->dst_ch = htons(ch->rem_channel); | 
|  | hdr->src_ch = htons(ch->id); | 
|  | hdr->bhdr.src_mbox = cmbox; | 
|  | hdr->bhdr.dst_mbox = cmbox; | 
|  | hdr->bhdr.type = RIO_CM_CHAN; | 
|  | hdr->ch_op = CM_CONN_ACK; | 
|  |  | 
|  | /* ATTN: the function call below relies on the fact that underlying | 
|  | * add_outb_message() routine copies TX data into its internal transfer | 
|  | * buffer. Review if switching to direct buffer version. | 
|  | */ | 
|  | ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); | 
|  |  | 
|  | if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, | 
|  | ch->rdev, hdr, sizeof(*hdr))) | 
|  | return 0; | 
|  | kfree(hdr); | 
|  |  | 
|  | if (ret) | 
|  | riocm_error("send ACK to ch_%d on %s failed (ret=%d)", | 
|  | ch->id, rio_name(ch->rdev), ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_accept - accept incoming connection request | 
|  | * @ch_id: channel ID | 
|  | * @new_ch_id: local mport device | 
|  | * @timeout: wait timeout (if 0 non-blocking call, do not wait if connection | 
|  | *           request is not available). | 
|  | * | 
|  | * Returns: pointer to new channel struct if success, or error-valued pointer: | 
|  | *          -ENODEV - cannot find specified channel or mport, | 
|  | *          -EINVAL - the channel is not in IDLE state, | 
|  | *          -EAGAIN - no connection request available immediately (timeout=0), | 
|  | *          -ENOMEM - unable to allocate new channel, | 
|  | *          -ETIME - wait timeout expired, | 
|  | *          -EINTR - wait was interrupted. | 
|  | */ | 
|  | static struct rio_channel *riocm_ch_accept(u16 ch_id, u16 *new_ch_id, | 
|  | long timeout) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | struct rio_channel *new_ch; | 
|  | struct conn_req *req; | 
|  | struct cm_peer *peer; | 
|  | int found = 0; | 
|  | int err = 0; | 
|  | long wret; | 
|  |  | 
|  | ch = riocm_get_channel(ch_id); | 
|  | if (!ch) | 
|  | return ERR_PTR(-EINVAL); | 
|  |  | 
|  | if (!riocm_cmp(ch, RIO_CM_LISTEN)) { | 
|  | err = -EINVAL; | 
|  | goto err_put; | 
|  | } | 
|  |  | 
|  | /* Don't sleep if this is a non blocking call */ | 
|  | if (!timeout) { | 
|  | if (!try_wait_for_completion(&ch->comp)) { | 
|  | err = -EAGAIN; | 
|  | goto err_put; | 
|  | } | 
|  | } else { | 
|  | riocm_debug(WAIT, "on %d", ch->id); | 
|  |  | 
|  | wret = wait_for_completion_interruptible_timeout(&ch->comp, | 
|  | timeout); | 
|  | if (!wret) { | 
|  | err = -ETIME; | 
|  | goto err_put; | 
|  | } else if (wret == -ERESTARTSYS) { | 
|  | err = -EINTR; | 
|  | goto err_put; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  |  | 
|  | if (ch->state != RIO_CM_LISTEN) { | 
|  | err = -ECANCELED; | 
|  | } else if (list_empty(&ch->accept_queue)) { | 
|  | riocm_debug(WAIT, "on %d accept_queue is empty on completion", | 
|  | ch->id); | 
|  | err = -EIO; | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ch->lock); | 
|  |  | 
|  | if (err) { | 
|  | riocm_debug(WAIT, "on %d returns %d", ch->id, err); | 
|  | goto err_put; | 
|  | } | 
|  |  | 
|  | /* Create new channel for this connection */ | 
|  | new_ch = riocm_ch_alloc(RIOCM_CHNUM_AUTO); | 
|  |  | 
|  | if (IS_ERR(new_ch)) { | 
|  | riocm_error("failed to get channel for new req (%ld)", | 
|  | PTR_ERR(new_ch)); | 
|  | err = -ENOMEM; | 
|  | goto err_put; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  |  | 
|  | req = list_first_entry(&ch->accept_queue, struct conn_req, node); | 
|  | list_del(&req->node); | 
|  | new_ch->cmdev = ch->cmdev; | 
|  | new_ch->loc_destid = ch->loc_destid; | 
|  | new_ch->rem_destid = req->destid; | 
|  | new_ch->rem_channel = req->chan; | 
|  |  | 
|  | spin_unlock_bh(&ch->lock); | 
|  | riocm_put_channel(ch); | 
|  | ch = NULL; | 
|  | kfree(req); | 
|  |  | 
|  | down_read(&rdev_sem); | 
|  | /* Find requester's device object */ | 
|  | list_for_each_entry(peer, &new_ch->cmdev->peers, node) { | 
|  | if (peer->rdev->destid == new_ch->rem_destid) { | 
|  | riocm_debug(RX_CMD, "found matching device(%s)", | 
|  | rio_name(peer->rdev)); | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | up_read(&rdev_sem); | 
|  |  | 
|  | if (!found) { | 
|  | /* If peer device object not found, simply ignore the request */ | 
|  | err = -ENODEV; | 
|  | goto err_put_new_ch; | 
|  | } | 
|  |  | 
|  | new_ch->rdev = peer->rdev; | 
|  | new_ch->state = RIO_CM_CONNECTED; | 
|  | spin_lock_init(&new_ch->lock); | 
|  |  | 
|  | /* Acknowledge the connection request. */ | 
|  | riocm_send_ack(new_ch); | 
|  |  | 
|  | *new_ch_id = new_ch->id; | 
|  | return new_ch; | 
|  |  | 
|  | err_put_new_ch: | 
|  | spin_lock_bh(&idr_lock); | 
|  | idr_remove(&ch_idr, new_ch->id); | 
|  | spin_unlock_bh(&idr_lock); | 
|  | riocm_put_channel(new_ch); | 
|  |  | 
|  | err_put: | 
|  | if (ch) | 
|  | riocm_put_channel(ch); | 
|  | *new_ch_id = 0; | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_listen - puts a channel into LISTEN state | 
|  | * @ch_id: channel ID | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -EINVAL if the specified channel does not exists or | 
|  | *                  is not in CHAN_BOUND state. | 
|  | */ | 
|  | static int riocm_ch_listen(u16 ch_id) | 
|  | { | 
|  | struct rio_channel *ch = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | riocm_debug(CHOP, "(ch_%d)", ch_id); | 
|  |  | 
|  | ch = riocm_get_channel(ch_id); | 
|  | if (!ch || !riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN)) | 
|  | ret = -EINVAL; | 
|  | riocm_put_channel(ch); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_bind - associate a channel object and an mport device | 
|  | * @ch_id: channel ID | 
|  | * @mport_id: local mport device ID | 
|  | * @context: pointer to the additional caller's context | 
|  | * | 
|  | * Returns: 0 if success, or | 
|  | *          -ENODEV if cannot find specified mport, | 
|  | *          -EINVAL if the specified channel does not exist or | 
|  | *                  is not in IDLE state. | 
|  | */ | 
|  | static int riocm_ch_bind(u16 ch_id, u8 mport_id, void *context) | 
|  | { | 
|  | struct rio_channel *ch = NULL; | 
|  | struct cm_dev *cm; | 
|  | int rc = -ENODEV; | 
|  |  | 
|  | riocm_debug(CHOP, "ch_%d to mport_%d", ch_id, mport_id); | 
|  |  | 
|  | /* Find matching cm_dev object */ | 
|  | down_read(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if ((cm->mport->id == mport_id) && | 
|  | rio_mport_is_running(cm->mport)) { | 
|  | rc = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rc) | 
|  | goto exit; | 
|  |  | 
|  | ch = riocm_get_channel(ch_id); | 
|  | if (!ch) { | 
|  | rc = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ch->lock); | 
|  | if (ch->state != RIO_CM_IDLE) { | 
|  | spin_unlock_bh(&ch->lock); | 
|  | rc = -EINVAL; | 
|  | goto err_put; | 
|  | } | 
|  |  | 
|  | ch->cmdev = cm; | 
|  | ch->loc_destid = cm->mport->host_deviceid; | 
|  | ch->context = context; | 
|  | ch->state = RIO_CM_CHAN_BOUND; | 
|  | spin_unlock_bh(&ch->lock); | 
|  | err_put: | 
|  | riocm_put_channel(ch); | 
|  | exit: | 
|  | up_read(&rdev_sem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_alloc - channel object allocation helper routine | 
|  | * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) | 
|  | * | 
|  | * Return value: pointer to newly created channel object, | 
|  | *               or error-valued pointer | 
|  | */ | 
|  | static struct rio_channel *riocm_ch_alloc(u16 ch_num) | 
|  | { | 
|  | int id; | 
|  | int start, end; | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | ch = kzalloc(sizeof(*ch), GFP_KERNEL); | 
|  | if (!ch) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | if (ch_num) { | 
|  | /* If requested, try to obtain the specified channel ID */ | 
|  | start = ch_num; | 
|  | end = ch_num + 1; | 
|  | } else { | 
|  | /* Obtain channel ID from the dynamic allocation range */ | 
|  | start = chstart; | 
|  | end = RIOCM_MAX_CHNUM + 1; | 
|  | } | 
|  |  | 
|  | idr_preload(GFP_KERNEL); | 
|  | spin_lock_bh(&idr_lock); | 
|  | id = idr_alloc_cyclic(&ch_idr, ch, start, end, GFP_NOWAIT); | 
|  | spin_unlock_bh(&idr_lock); | 
|  | idr_preload_end(); | 
|  |  | 
|  | if (id < 0) { | 
|  | kfree(ch); | 
|  | return ERR_PTR(id == -ENOSPC ? -EBUSY : id); | 
|  | } | 
|  |  | 
|  | ch->id = (u16)id; | 
|  | ch->state = RIO_CM_IDLE; | 
|  | spin_lock_init(&ch->lock); | 
|  | INIT_LIST_HEAD(&ch->accept_queue); | 
|  | INIT_LIST_HEAD(&ch->ch_node); | 
|  | init_completion(&ch->comp); | 
|  | init_completion(&ch->comp_close); | 
|  | kref_init(&ch->ref); | 
|  | ch->rx_ring.head = 0; | 
|  | ch->rx_ring.tail = 0; | 
|  | ch->rx_ring.count = 0; | 
|  | ch->rx_ring.inuse_cnt = 0; | 
|  |  | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_create - creates a new channel object and allocates ID for it | 
|  | * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic) | 
|  | * | 
|  | * Allocates and initializes a new channel object. If the parameter ch_num > 0 | 
|  | * and is within the valid range, riocm_ch_create tries to allocate the | 
|  | * specified ID for the new channel. If ch_num = 0, channel ID will be assigned | 
|  | * automatically from the range (chstart ... RIOCM_MAX_CHNUM). | 
|  | * Module parameter 'chstart' defines start of an ID range available for dynamic | 
|  | * allocation. Range below 'chstart' is reserved for pre-defined ID numbers. | 
|  | * Available channel numbers are limited by 16-bit size of channel numbers used | 
|  | * in the packet header. | 
|  | * | 
|  | * Return value: PTR to rio_channel structure if successful (with channel number | 
|  | *               updated via pointer) or error-valued pointer if error. | 
|  | */ | 
|  | static struct rio_channel *riocm_ch_create(u16 *ch_num) | 
|  | { | 
|  | struct rio_channel *ch = NULL; | 
|  |  | 
|  | ch = riocm_ch_alloc(*ch_num); | 
|  |  | 
|  | if (IS_ERR(ch)) | 
|  | riocm_debug(CHOP, "Failed to allocate channel %d (err=%ld)", | 
|  | *ch_num, PTR_ERR(ch)); | 
|  | else | 
|  | *ch_num = ch->id; | 
|  |  | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_free - channel object release routine | 
|  | * @ref: pointer to a channel's kref structure | 
|  | */ | 
|  | static void riocm_ch_free(struct kref *ref) | 
|  | { | 
|  | struct rio_channel *ch = container_of(ref, struct rio_channel, ref); | 
|  | int i; | 
|  |  | 
|  | riocm_debug(CHOP, "(ch_%d)", ch->id); | 
|  |  | 
|  | if (ch->rx_ring.inuse_cnt) { | 
|  | for (i = 0; | 
|  | i < RIOCM_RX_RING_SIZE && ch->rx_ring.inuse_cnt; i++) { | 
|  | if (ch->rx_ring.inuse[i] != NULL) { | 
|  | kfree(ch->rx_ring.inuse[i]); | 
|  | ch->rx_ring.inuse_cnt--; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ch->rx_ring.count) | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE && ch->rx_ring.count; i++) { | 
|  | if (ch->rx_ring.buf[i] != NULL) { | 
|  | kfree(ch->rx_ring.buf[i]); | 
|  | ch->rx_ring.count--; | 
|  | } | 
|  | } | 
|  |  | 
|  | complete(&ch->comp_close); | 
|  | } | 
|  |  | 
|  | static int riocm_send_close(struct rio_channel *ch) | 
|  | { | 
|  | struct rio_ch_chan_hdr *hdr; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Send CH_CLOSE notification to the remote RapidIO device | 
|  | */ | 
|  |  | 
|  | hdr = kzalloc(sizeof(*hdr), GFP_KERNEL); | 
|  | if (hdr == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hdr->bhdr.src_id = htonl(ch->loc_destid); | 
|  | hdr->bhdr.dst_id = htonl(ch->rem_destid); | 
|  | hdr->bhdr.src_mbox = cmbox; | 
|  | hdr->bhdr.dst_mbox = cmbox; | 
|  | hdr->bhdr.type = RIO_CM_CHAN; | 
|  | hdr->ch_op = CM_CONN_CLOSE; | 
|  | hdr->dst_ch = htons(ch->rem_channel); | 
|  | hdr->src_ch = htons(ch->id); | 
|  |  | 
|  | /* ATTN: the function call below relies on the fact that underlying | 
|  | * add_outb_message() routine copies TX data into its internal transfer | 
|  | * buffer. Needs to be reviewed if switched to direct buffer mode. | 
|  | */ | 
|  | ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr)); | 
|  |  | 
|  | if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, ch->rdev, | 
|  | hdr, sizeof(*hdr))) | 
|  | return 0; | 
|  | kfree(hdr); | 
|  |  | 
|  | if (ret) | 
|  | riocm_error("ch(%d) send CLOSE failed (ret=%d)", ch->id, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_ch_close - closes a channel object with specified ID (by local request) | 
|  | * @ch: channel to be closed | 
|  | */ | 
|  | static int riocm_ch_close(struct rio_channel *ch) | 
|  | { | 
|  | unsigned long tmo = msecs_to_jiffies(3000); | 
|  | enum rio_cm_state state; | 
|  | long wret; | 
|  | int ret = 0; | 
|  |  | 
|  | riocm_debug(CHOP, "ch_%d by %s(%d)", | 
|  | ch->id, current->comm, task_pid_nr(current)); | 
|  |  | 
|  | state = riocm_exch(ch, RIO_CM_DESTROYING); | 
|  | if (state == RIO_CM_CONNECTED) | 
|  | riocm_send_close(ch); | 
|  |  | 
|  | complete_all(&ch->comp); | 
|  |  | 
|  | riocm_put_channel(ch); | 
|  | wret = wait_for_completion_interruptible_timeout(&ch->comp_close, tmo); | 
|  |  | 
|  | riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret); | 
|  |  | 
|  | if (wret == 0) { | 
|  | /* Timeout on wait occurred */ | 
|  | riocm_debug(CHOP, "%s(%d) timed out waiting for ch %d", | 
|  | current->comm, task_pid_nr(current), ch->id); | 
|  | ret = -ETIMEDOUT; | 
|  | } else if (wret == -ERESTARTSYS) { | 
|  | /* Wait_for_completion was interrupted by a signal */ | 
|  | riocm_debug(CHOP, "%s(%d) wait for ch %d was interrupted", | 
|  | current->comm, task_pid_nr(current), ch->id); | 
|  | ret = -EINTR; | 
|  | } | 
|  |  | 
|  | if (!ret) { | 
|  | riocm_debug(CHOP, "ch_%d resources released", ch->id); | 
|  | kfree(ch); | 
|  | } else { | 
|  | riocm_debug(CHOP, "failed to release ch_%d resources", ch->id); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_cdev_open() - Open character device | 
|  | */ | 
|  | static int riocm_cdev_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | riocm_debug(INIT, "by %s(%d) filp=%p ", | 
|  | current->comm, task_pid_nr(current), filp); | 
|  |  | 
|  | if (list_empty(&cm_dev_list)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_cdev_release() - Release character device | 
|  | */ | 
|  | static int riocm_cdev_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct rio_channel *ch, *_c; | 
|  | unsigned int i; | 
|  | LIST_HEAD(list); | 
|  |  | 
|  | riocm_debug(EXIT, "by %s(%d) filp=%p", | 
|  | current->comm, task_pid_nr(current), filp); | 
|  |  | 
|  | /* Check if there are channels associated with this file descriptor */ | 
|  | spin_lock_bh(&idr_lock); | 
|  | idr_for_each_entry(&ch_idr, ch, i) { | 
|  | if (ch && ch->filp == filp) { | 
|  | riocm_debug(EXIT, "ch_%d not released by %s(%d)", | 
|  | ch->id, current->comm, | 
|  | task_pid_nr(current)); | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | list_add(&ch->ch_node, &list); | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | if (!list_empty(&list)) { | 
|  | list_for_each_entry_safe(ch, _c, &list, ch_node) { | 
|  | list_del(&ch->ch_node); | 
|  | riocm_ch_close(ch); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_ep_get_list_size() - Reports number of endpoints in the network | 
|  | */ | 
|  | static int cm_ep_get_list_size(void __user *arg) | 
|  | { | 
|  | u32 __user *p = arg; | 
|  | u32 mport_id; | 
|  | u32 count = 0; | 
|  | struct cm_dev *cm; | 
|  |  | 
|  | if (get_user(mport_id, p)) | 
|  | return -EFAULT; | 
|  | if (mport_id >= RIO_MAX_MPORTS) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Find a matching cm_dev object */ | 
|  | down_read(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (cm->mport->id == mport_id) { | 
|  | count = cm->npeers; | 
|  | up_read(&rdev_sem); | 
|  | if (copy_to_user(arg, &count, sizeof(u32))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | up_read(&rdev_sem); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_ep_get_list() - Returns list of attached endpoints | 
|  | */ | 
|  | static int cm_ep_get_list(void __user *arg) | 
|  | { | 
|  | struct cm_dev *cm; | 
|  | struct cm_peer *peer; | 
|  | u32 info[2]; | 
|  | void *buf; | 
|  | u32 nent; | 
|  | u32 *entry_ptr; | 
|  | u32 i = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | if (copy_from_user(&info, arg, sizeof(info))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (info[1] >= RIO_MAX_MPORTS || info[0] > RIOCM_MAX_EP_COUNT) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Find a matching cm_dev object */ | 
|  | down_read(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) | 
|  | if (cm->mport->id == (u8)info[1]) | 
|  | goto found; | 
|  |  | 
|  | up_read(&rdev_sem); | 
|  | return -ENODEV; | 
|  |  | 
|  | found: | 
|  | nent = min(info[0], cm->npeers); | 
|  | buf = kcalloc(nent + 2, sizeof(u32), GFP_KERNEL); | 
|  | if (!buf) { | 
|  | up_read(&rdev_sem); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | entry_ptr = (u32 *)((uintptr_t)buf + 2*sizeof(u32)); | 
|  |  | 
|  | list_for_each_entry(peer, &cm->peers, node) { | 
|  | *entry_ptr = (u32)peer->rdev->destid; | 
|  | entry_ptr++; | 
|  | if (++i == nent) | 
|  | break; | 
|  | } | 
|  | up_read(&rdev_sem); | 
|  |  | 
|  | ((u32 *)buf)[0] = i; /* report an updated number of entries */ | 
|  | ((u32 *)buf)[1] = info[1]; /* put back an mport ID */ | 
|  | if (copy_to_user(arg, buf, sizeof(u32) * (info[0] + 2))) | 
|  | ret = -EFAULT; | 
|  |  | 
|  | kfree(buf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_mport_get_list() - Returns list of available local mport devices | 
|  | */ | 
|  | static int cm_mport_get_list(void __user *arg) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 entries; | 
|  | void *buf; | 
|  | struct cm_dev *cm; | 
|  | u32 *entry_ptr; | 
|  | int count = 0; | 
|  |  | 
|  | if (copy_from_user(&entries, arg, sizeof(entries))) | 
|  | return -EFAULT; | 
|  | if (entries == 0 || entries > RIO_MAX_MPORTS) | 
|  | return -EINVAL; | 
|  | buf = kcalloc(entries + 1, sizeof(u32), GFP_KERNEL); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Scan all registered cm_dev objects */ | 
|  | entry_ptr = (u32 *)((uintptr_t)buf + sizeof(u32)); | 
|  | down_read(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (count++ < entries) { | 
|  | *entry_ptr = (cm->mport->id << 16) | | 
|  | cm->mport->host_deviceid; | 
|  | entry_ptr++; | 
|  | } | 
|  | } | 
|  | up_read(&rdev_sem); | 
|  |  | 
|  | *((u32 *)buf) = count; /* report a real number of entries */ | 
|  | if (copy_to_user(arg, buf, sizeof(u32) * (count + 1))) | 
|  | ret = -EFAULT; | 
|  |  | 
|  | kfree(buf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_create() - Create a message exchange channel | 
|  | */ | 
|  | static int cm_chan_create(struct file *filp, void __user *arg) | 
|  | { | 
|  | u16 __user *p = arg; | 
|  | u16 ch_num; | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | if (get_user(ch_num, p)) | 
|  | return -EFAULT; | 
|  |  | 
|  | riocm_debug(CHOP, "ch_%d requested by %s(%d)", | 
|  | ch_num, current->comm, task_pid_nr(current)); | 
|  | ch = riocm_ch_create(&ch_num); | 
|  | if (IS_ERR(ch)) | 
|  | return PTR_ERR(ch); | 
|  |  | 
|  | ch->filp = filp; | 
|  | riocm_debug(CHOP, "ch_%d created by %s(%d)", | 
|  | ch_num, current->comm, task_pid_nr(current)); | 
|  | return put_user(ch_num, p); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_close() - Close channel | 
|  | * @filp:	Pointer to file object | 
|  | * @arg:	Channel to close | 
|  | */ | 
|  | static int cm_chan_close(struct file *filp, void __user *arg) | 
|  | { | 
|  | u16 __user *p = arg; | 
|  | u16 ch_num; | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | if (get_user(ch_num, p)) | 
|  | return -EFAULT; | 
|  |  | 
|  | riocm_debug(CHOP, "ch_%d by %s(%d)", | 
|  | ch_num, current->comm, task_pid_nr(current)); | 
|  |  | 
|  | spin_lock_bh(&idr_lock); | 
|  | ch = idr_find(&ch_idr, ch_num); | 
|  | if (!ch) { | 
|  | spin_unlock_bh(&idr_lock); | 
|  | return 0; | 
|  | } | 
|  | if (ch->filp != filp) { | 
|  | spin_unlock_bh(&idr_lock); | 
|  | return -EINVAL; | 
|  | } | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | return riocm_ch_close(ch); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_bind() - Bind channel | 
|  | * @arg:	Channel number | 
|  | */ | 
|  | static int cm_chan_bind(void __user *arg) | 
|  | { | 
|  | struct rio_cm_channel chan; | 
|  |  | 
|  | if (copy_from_user(&chan, arg, sizeof(chan))) | 
|  | return -EFAULT; | 
|  | if (chan.mport_id >= RIO_MAX_MPORTS) | 
|  | return -EINVAL; | 
|  |  | 
|  | return riocm_ch_bind(chan.id, chan.mport_id, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_listen() - Listen on channel | 
|  | * @arg:	Channel number | 
|  | */ | 
|  | static int cm_chan_listen(void __user *arg) | 
|  | { | 
|  | u16 __user *p = arg; | 
|  | u16 ch_num; | 
|  |  | 
|  | if (get_user(ch_num, p)) | 
|  | return -EFAULT; | 
|  |  | 
|  | return riocm_ch_listen(ch_num); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_accept() - Accept incoming connection | 
|  | * @filp:	Pointer to file object | 
|  | * @arg:	Channel number | 
|  | */ | 
|  | static int cm_chan_accept(struct file *filp, void __user *arg) | 
|  | { | 
|  | struct rio_cm_accept param; | 
|  | long accept_to; | 
|  | struct rio_channel *ch; | 
|  |  | 
|  | if (copy_from_user(¶m, arg, sizeof(param))) | 
|  | return -EFAULT; | 
|  |  | 
|  | riocm_debug(CHOP, "on ch_%d by %s(%d)", | 
|  | param.ch_num, current->comm, task_pid_nr(current)); | 
|  |  | 
|  | accept_to = param.wait_to ? | 
|  | msecs_to_jiffies(param.wait_to) : 0; | 
|  |  | 
|  | ch = riocm_ch_accept(param.ch_num, ¶m.ch_num, accept_to); | 
|  | if (IS_ERR(ch)) | 
|  | return PTR_ERR(ch); | 
|  | ch->filp = filp; | 
|  |  | 
|  | riocm_debug(CHOP, "new ch_%d for %s(%d)", | 
|  | ch->id, current->comm, task_pid_nr(current)); | 
|  |  | 
|  | if (copy_to_user(arg, ¶m, sizeof(param))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_connect() - Connect on channel | 
|  | * @arg:	Channel information | 
|  | */ | 
|  | static int cm_chan_connect(void __user *arg) | 
|  | { | 
|  | struct rio_cm_channel chan; | 
|  | struct cm_dev *cm; | 
|  | struct cm_peer *peer; | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | if (copy_from_user(&chan, arg, sizeof(chan))) | 
|  | return -EFAULT; | 
|  | if (chan.mport_id >= RIO_MAX_MPORTS) | 
|  | return -EINVAL; | 
|  |  | 
|  | down_read(&rdev_sem); | 
|  |  | 
|  | /* Find matching cm_dev object */ | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (cm->mport->id == chan.mport_id) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | goto err_out; | 
|  |  | 
|  | if (chan.remote_destid >= RIO_ANY_DESTID(cm->mport->sys_size)) { | 
|  | ret = -EINVAL; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | /* Find corresponding RapidIO endpoint device object */ | 
|  | ret = -ENODEV; | 
|  |  | 
|  | list_for_each_entry(peer, &cm->peers, node) { | 
|  | if (peer->rdev->destid == chan.remote_destid) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | goto err_out; | 
|  |  | 
|  | up_read(&rdev_sem); | 
|  |  | 
|  | return riocm_ch_connect(chan.id, cm, peer, chan.remote_channel); | 
|  | err_out: | 
|  | up_read(&rdev_sem); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_msg_send() - Send a message through channel | 
|  | * @arg:	Outbound message information | 
|  | */ | 
|  | static int cm_chan_msg_send(void __user *arg) | 
|  | { | 
|  | struct rio_cm_msg msg; | 
|  | void *buf; | 
|  | int ret; | 
|  |  | 
|  | if (copy_from_user(&msg, arg, sizeof(msg))) | 
|  | return -EFAULT; | 
|  | if (msg.size > RIO_MAX_MSG_SIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | buf = memdup_user((void __user *)(uintptr_t)msg.msg, msg.size); | 
|  | if (IS_ERR(buf)) | 
|  | return PTR_ERR(buf); | 
|  |  | 
|  | ret = riocm_ch_send(msg.ch_num, buf, msg.size); | 
|  |  | 
|  | kfree(buf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cm_chan_msg_rcv() - Receive a message through channel | 
|  | * @arg:	Inbound message information | 
|  | */ | 
|  | static int cm_chan_msg_rcv(void __user *arg) | 
|  | { | 
|  | struct rio_cm_msg msg; | 
|  | struct rio_channel *ch; | 
|  | void *buf; | 
|  | long rxto; | 
|  | int ret = 0, msg_size; | 
|  |  | 
|  | if (copy_from_user(&msg, arg, sizeof(msg))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (msg.ch_num == 0 || msg.size == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | ch = riocm_get_channel(msg.ch_num); | 
|  | if (!ch) | 
|  | return -ENODEV; | 
|  |  | 
|  | rxto = msg.rxto ? msecs_to_jiffies(msg.rxto) : MAX_SCHEDULE_TIMEOUT; | 
|  |  | 
|  | ret = riocm_ch_receive(ch, &buf, rxto); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | msg_size = min(msg.size, (u16)(RIO_MAX_MSG_SIZE)); | 
|  |  | 
|  | if (copy_to_user((void __user *)(uintptr_t)msg.msg, buf, msg_size)) | 
|  | ret = -EFAULT; | 
|  |  | 
|  | riocm_ch_free_rxbuf(ch, buf); | 
|  | out: | 
|  | riocm_put_channel(ch); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_cdev_ioctl() - IOCTL requests handler | 
|  | */ | 
|  | static long | 
|  | riocm_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | switch (cmd) { | 
|  | case RIO_CM_EP_GET_LIST_SIZE: | 
|  | return cm_ep_get_list_size((void __user *)arg); | 
|  | case RIO_CM_EP_GET_LIST: | 
|  | return cm_ep_get_list((void __user *)arg); | 
|  | case RIO_CM_CHAN_CREATE: | 
|  | return cm_chan_create(filp, (void __user *)arg); | 
|  | case RIO_CM_CHAN_CLOSE: | 
|  | return cm_chan_close(filp, (void __user *)arg); | 
|  | case RIO_CM_CHAN_BIND: | 
|  | return cm_chan_bind((void __user *)arg); | 
|  | case RIO_CM_CHAN_LISTEN: | 
|  | return cm_chan_listen((void __user *)arg); | 
|  | case RIO_CM_CHAN_ACCEPT: | 
|  | return cm_chan_accept(filp, (void __user *)arg); | 
|  | case RIO_CM_CHAN_CONNECT: | 
|  | return cm_chan_connect((void __user *)arg); | 
|  | case RIO_CM_CHAN_SEND: | 
|  | return cm_chan_msg_send((void __user *)arg); | 
|  | case RIO_CM_CHAN_RECEIVE: | 
|  | return cm_chan_msg_rcv((void __user *)arg); | 
|  | case RIO_CM_MPORT_GET_LIST: | 
|  | return cm_mport_get_list((void __user *)arg); | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static const struct file_operations riocm_cdev_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= riocm_cdev_open, | 
|  | .release	= riocm_cdev_release, | 
|  | .unlocked_ioctl = riocm_cdev_ioctl, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * riocm_add_dev - add new remote RapidIO device into channel management core | 
|  | * @dev: device object associated with RapidIO device | 
|  | * @sif: subsystem interface | 
|  | * | 
|  | * Adds the specified RapidIO device (if applicable) into peers list of | 
|  | * the corresponding channel management device (cm_dev). | 
|  | */ | 
|  | static int riocm_add_dev(struct device *dev, struct subsys_interface *sif) | 
|  | { | 
|  | struct cm_peer *peer; | 
|  | struct rio_dev *rdev = to_rio_dev(dev); | 
|  | struct cm_dev *cm; | 
|  |  | 
|  | /* Check if the remote device has capabilities required to support CM */ | 
|  | if (!dev_cm_capable(rdev)) | 
|  | return 0; | 
|  |  | 
|  | riocm_debug(RDEV, "(%s)", rio_name(rdev)); | 
|  |  | 
|  | peer = kmalloc(sizeof(*peer), GFP_KERNEL); | 
|  | if (!peer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Find a corresponding cm_dev object */ | 
|  | down_write(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (cm->mport == rdev->net->hport) | 
|  | goto found; | 
|  | } | 
|  |  | 
|  | up_write(&rdev_sem); | 
|  | kfree(peer); | 
|  | return -ENODEV; | 
|  |  | 
|  | found: | 
|  | peer->rdev = rdev; | 
|  | list_add_tail(&peer->node, &cm->peers); | 
|  | cm->npeers++; | 
|  |  | 
|  | up_write(&rdev_sem); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_remove_dev - remove remote RapidIO device from channel management core | 
|  | * @dev: device object associated with RapidIO device | 
|  | * @sif: subsystem interface | 
|  | * | 
|  | * Removes the specified RapidIO device (if applicable) from peers list of | 
|  | * the corresponding channel management device (cm_dev). | 
|  | */ | 
|  | static void riocm_remove_dev(struct device *dev, struct subsys_interface *sif) | 
|  | { | 
|  | struct rio_dev *rdev = to_rio_dev(dev); | 
|  | struct cm_dev *cm; | 
|  | struct cm_peer *peer; | 
|  | struct rio_channel *ch, *_c; | 
|  | unsigned int i; | 
|  | bool found = false; | 
|  | LIST_HEAD(list); | 
|  |  | 
|  | /* Check if the remote device has capabilities required to support CM */ | 
|  | if (!dev_cm_capable(rdev)) | 
|  | return; | 
|  |  | 
|  | riocm_debug(RDEV, "(%s)", rio_name(rdev)); | 
|  |  | 
|  | /* Find matching cm_dev object */ | 
|  | down_write(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (cm->mport == rdev->net->hport) { | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | up_write(&rdev_sem); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Remove remote device from the list of peers */ | 
|  | found = false; | 
|  | list_for_each_entry(peer, &cm->peers, node) { | 
|  | if (peer->rdev == rdev) { | 
|  | riocm_debug(RDEV, "removing peer %s", rio_name(rdev)); | 
|  | found = true; | 
|  | list_del(&peer->node); | 
|  | cm->npeers--; | 
|  | kfree(peer); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | up_write(&rdev_sem); | 
|  |  | 
|  | if (!found) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Release channels associated with this peer | 
|  | */ | 
|  |  | 
|  | spin_lock_bh(&idr_lock); | 
|  | idr_for_each_entry(&ch_idr, ch, i) { | 
|  | if (ch && ch->rdev == rdev) { | 
|  | if (atomic_read(&rdev->state) != RIO_DEVICE_SHUTDOWN) | 
|  | riocm_exch(ch, RIO_CM_DISCONNECT); | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | list_add(&ch->ch_node, &list); | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | if (!list_empty(&list)) { | 
|  | list_for_each_entry_safe(ch, _c, &list, ch_node) { | 
|  | list_del(&ch->ch_node); | 
|  | riocm_ch_close(ch); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_cdev_add() - Create rio_cm char device | 
|  | * @devno: device number assigned to device (MAJ + MIN) | 
|  | */ | 
|  | static int riocm_cdev_add(dev_t devno) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | cdev_init(&riocm_cdev.cdev, &riocm_cdev_fops); | 
|  | riocm_cdev.cdev.owner = THIS_MODULE; | 
|  | ret = cdev_add(&riocm_cdev.cdev, devno, 1); | 
|  | if (ret < 0) { | 
|  | riocm_error("Cannot register a device with error %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | riocm_cdev.dev = device_create(dev_class, NULL, devno, NULL, DEV_NAME); | 
|  | if (IS_ERR(riocm_cdev.dev)) { | 
|  | cdev_del(&riocm_cdev.cdev); | 
|  | return PTR_ERR(riocm_cdev.dev); | 
|  | } | 
|  |  | 
|  | riocm_debug(MPORT, "Added %s cdev(%d:%d)", | 
|  | DEV_NAME, MAJOR(devno), MINOR(devno)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_add_mport - add new local mport device into channel management core | 
|  | * @dev: device object associated with mport | 
|  | * @class_intf: class interface | 
|  | * | 
|  | * When a new mport device is added, CM immediately reserves inbound and | 
|  | * outbound RapidIO mailboxes that will be used. | 
|  | */ | 
|  | static int riocm_add_mport(struct device *dev, | 
|  | struct class_interface *class_intf) | 
|  | { | 
|  | int rc; | 
|  | int i; | 
|  | struct cm_dev *cm; | 
|  | struct rio_mport *mport = to_rio_mport(dev); | 
|  |  | 
|  | riocm_debug(MPORT, "add mport %s", mport->name); | 
|  |  | 
|  | cm = kzalloc(sizeof(*cm), GFP_KERNEL); | 
|  | if (!cm) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cm->mport = mport; | 
|  |  | 
|  | rc = rio_request_outb_mbox(mport, cm, cmbox, | 
|  | RIOCM_TX_RING_SIZE, riocm_outb_msg_event); | 
|  | if (rc) { | 
|  | riocm_error("failed to allocate OBMBOX_%d on %s", | 
|  | cmbox, mport->name); | 
|  | kfree(cm); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | rc = rio_request_inb_mbox(mport, cm, cmbox, | 
|  | RIOCM_RX_RING_SIZE, riocm_inb_msg_event); | 
|  | if (rc) { | 
|  | riocm_error("failed to allocate IBMBOX_%d on %s", | 
|  | cmbox, mport->name); | 
|  | rio_release_outb_mbox(mport, cmbox); | 
|  | kfree(cm); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate and register inbound messaging buffers to be ready | 
|  | * to receive channel and system management requests | 
|  | */ | 
|  | for (i = 0; i < RIOCM_RX_RING_SIZE; i++) | 
|  | cm->rx_buf[i] = NULL; | 
|  |  | 
|  | cm->rx_slots = RIOCM_RX_RING_SIZE; | 
|  | mutex_init(&cm->rx_lock); | 
|  | riocm_rx_fill(cm, RIOCM_RX_RING_SIZE); | 
|  | cm->rx_wq = create_workqueue(DRV_NAME "/rxq"); | 
|  | if (!cm->rx_wq) { | 
|  | riocm_error("failed to allocate IBMBOX_%d on %s", | 
|  | cmbox, mport->name); | 
|  | rio_release_outb_mbox(mport, cmbox); | 
|  | kfree(cm); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | INIT_WORK(&cm->rx_work, rio_ibmsg_handler); | 
|  |  | 
|  | cm->tx_slot = 0; | 
|  | cm->tx_cnt = 0; | 
|  | cm->tx_ack_slot = 0; | 
|  | spin_lock_init(&cm->tx_lock); | 
|  |  | 
|  | INIT_LIST_HEAD(&cm->peers); | 
|  | cm->npeers = 0; | 
|  | INIT_LIST_HEAD(&cm->tx_reqs); | 
|  |  | 
|  | down_write(&rdev_sem); | 
|  | list_add_tail(&cm->list, &cm_dev_list); | 
|  | up_write(&rdev_sem); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_remove_mport - remove local mport device from channel management core | 
|  | * @dev: device object associated with mport | 
|  | * @class_intf: class interface | 
|  | * | 
|  | * Removes a local mport device from the list of registered devices that provide | 
|  | * channel management services. Returns an error if the specified mport is not | 
|  | * registered with the CM core. | 
|  | */ | 
|  | static void riocm_remove_mport(struct device *dev, | 
|  | struct class_interface *class_intf) | 
|  | { | 
|  | struct rio_mport *mport = to_rio_mport(dev); | 
|  | struct cm_dev *cm; | 
|  | struct cm_peer *peer, *temp; | 
|  | struct rio_channel *ch, *_c; | 
|  | unsigned int i; | 
|  | bool found = false; | 
|  | LIST_HEAD(list); | 
|  |  | 
|  | riocm_debug(MPORT, "%s", mport->name); | 
|  |  | 
|  | /* Find a matching cm_dev object */ | 
|  | down_write(&rdev_sem); | 
|  | list_for_each_entry(cm, &cm_dev_list, list) { | 
|  | if (cm->mport == mport) { | 
|  | list_del(&cm->list); | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  | up_write(&rdev_sem); | 
|  | if (!found) | 
|  | return; | 
|  |  | 
|  | flush_workqueue(cm->rx_wq); | 
|  | destroy_workqueue(cm->rx_wq); | 
|  |  | 
|  | /* Release channels bound to this mport */ | 
|  | spin_lock_bh(&idr_lock); | 
|  | idr_for_each_entry(&ch_idr, ch, i) { | 
|  | if (ch->cmdev == cm) { | 
|  | riocm_debug(RDEV, "%s drop ch_%d", | 
|  | mport->name, ch->id); | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | list_add(&ch->ch_node, &list); | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | if (!list_empty(&list)) { | 
|  | list_for_each_entry_safe(ch, _c, &list, ch_node) { | 
|  | list_del(&ch->ch_node); | 
|  | riocm_ch_close(ch); | 
|  | } | 
|  | } | 
|  |  | 
|  | rio_release_inb_mbox(mport, cmbox); | 
|  | rio_release_outb_mbox(mport, cmbox); | 
|  |  | 
|  | /* Remove and free peer entries */ | 
|  | if (!list_empty(&cm->peers)) | 
|  | riocm_debug(RDEV, "ATTN: peer list not empty"); | 
|  | list_for_each_entry_safe(peer, temp, &cm->peers, node) { | 
|  | riocm_debug(RDEV, "removing peer %s", rio_name(peer->rdev)); | 
|  | list_del(&peer->node); | 
|  | kfree(peer); | 
|  | } | 
|  |  | 
|  | riocm_rx_free(cm); | 
|  | kfree(cm); | 
|  | riocm_debug(MPORT, "%s done", mport->name); | 
|  | } | 
|  |  | 
|  | static int rio_cm_shutdown(struct notifier_block *nb, unsigned long code, | 
|  | void *unused) | 
|  | { | 
|  | struct rio_channel *ch; | 
|  | unsigned int i; | 
|  | LIST_HEAD(list); | 
|  |  | 
|  | riocm_debug(EXIT, "."); | 
|  |  | 
|  | /* | 
|  | * If there are any channels left in connected state send | 
|  | * close notification to the connection partner. | 
|  | * First build a list of channels that require a closing | 
|  | * notification because function riocm_send_close() should | 
|  | * be called outside of spinlock protected code. | 
|  | */ | 
|  | spin_lock_bh(&idr_lock); | 
|  | idr_for_each_entry(&ch_idr, ch, i) { | 
|  | if (ch->state == RIO_CM_CONNECTED) { | 
|  | riocm_debug(EXIT, "close ch %d", ch->id); | 
|  | idr_remove(&ch_idr, ch->id); | 
|  | list_add(&ch->ch_node, &list); | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&idr_lock); | 
|  |  | 
|  | list_for_each_entry(ch, &list, ch_node) | 
|  | riocm_send_close(ch); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * riocm_interface handles addition/removal of remote RapidIO devices | 
|  | */ | 
|  | static struct subsys_interface riocm_interface = { | 
|  | .name		= "rio_cm", | 
|  | .subsys		= &rio_bus_type, | 
|  | .add_dev	= riocm_add_dev, | 
|  | .remove_dev	= riocm_remove_dev, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * rio_mport_interface handles addition/removal local mport devices | 
|  | */ | 
|  | static struct class_interface rio_mport_interface __refdata = { | 
|  | .class = &rio_mport_class, | 
|  | .add_dev = riocm_add_mport, | 
|  | .remove_dev = riocm_remove_mport, | 
|  | }; | 
|  |  | 
|  | static struct notifier_block rio_cm_notifier = { | 
|  | .notifier_call = rio_cm_shutdown, | 
|  | }; | 
|  |  | 
|  | static int __init riocm_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* Create device class needed by udev */ | 
|  | dev_class = class_create(THIS_MODULE, DRV_NAME); | 
|  | if (IS_ERR(dev_class)) { | 
|  | riocm_error("Cannot create " DRV_NAME " class"); | 
|  | return PTR_ERR(dev_class); | 
|  | } | 
|  |  | 
|  | ret = alloc_chrdev_region(&dev_number, 0, 1, DRV_NAME); | 
|  | if (ret) { | 
|  | class_destroy(dev_class); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | dev_major = MAJOR(dev_number); | 
|  | dev_minor_base = MINOR(dev_number); | 
|  | riocm_debug(INIT, "Registered class with %d major", dev_major); | 
|  |  | 
|  | /* | 
|  | * Register as rapidio_port class interface to get notifications about | 
|  | * mport additions and removals. | 
|  | */ | 
|  | ret = class_interface_register(&rio_mport_interface); | 
|  | if (ret) { | 
|  | riocm_error("class_interface_register error: %d", ret); | 
|  | goto err_reg; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Register as RapidIO bus interface to get notifications about | 
|  | * addition/removal of remote RapidIO devices. | 
|  | */ | 
|  | ret = subsys_interface_register(&riocm_interface); | 
|  | if (ret) { | 
|  | riocm_error("subsys_interface_register error: %d", ret); | 
|  | goto err_cl; | 
|  | } | 
|  |  | 
|  | ret = register_reboot_notifier(&rio_cm_notifier); | 
|  | if (ret) { | 
|  | riocm_error("failed to register reboot notifier (err=%d)", ret); | 
|  | goto err_sif; | 
|  | } | 
|  |  | 
|  | ret = riocm_cdev_add(dev_number); | 
|  | if (ret) { | 
|  | unregister_reboot_notifier(&rio_cm_notifier); | 
|  | ret = -ENODEV; | 
|  | goto err_sif; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | err_sif: | 
|  | subsys_interface_unregister(&riocm_interface); | 
|  | err_cl: | 
|  | class_interface_unregister(&rio_mport_interface); | 
|  | err_reg: | 
|  | unregister_chrdev_region(dev_number, 1); | 
|  | class_destroy(dev_class); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit riocm_exit(void) | 
|  | { | 
|  | riocm_debug(EXIT, "enter"); | 
|  | unregister_reboot_notifier(&rio_cm_notifier); | 
|  | subsys_interface_unregister(&riocm_interface); | 
|  | class_interface_unregister(&rio_mport_interface); | 
|  | idr_destroy(&ch_idr); | 
|  |  | 
|  | device_unregister(riocm_cdev.dev); | 
|  | cdev_del(&(riocm_cdev.cdev)); | 
|  |  | 
|  | class_destroy(dev_class); | 
|  | unregister_chrdev_region(dev_number, 1); | 
|  | } | 
|  |  | 
|  | late_initcall(riocm_init); | 
|  | module_exit(riocm_exit); |