| /* |
| * nv_tco: TCO timer driver for nVidia chipsets. |
| * |
| * (c) Copyright 2005 Google Inc., All Rights Reserved. |
| * |
| * Supported Chipsets: |
| * - MCP51/MCP55 |
| * |
| * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights |
| * Reserved. |
| * http://www.kernelconcepts.de |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither kernel concepts nor Nils Faerber admit liability nor provide |
| * warranty for any of this software. This material is provided |
| * "AS-IS" and at no charge. |
| * |
| * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de> |
| * developed for |
| * Jentro AG, Haar/Munich (Germany) |
| * |
| * TCO timer driver for NV chipsets |
| * based on softdog.c by Alan Cox <alan@redhat.com> |
| */ |
| |
| /* |
| * Some address definitions for the TCO |
| */ |
| |
| #define TCO_RLD(base) ((base) + 0x00) /* TCO Timer Reload and Current Value */ |
| #define TCO_TMR(base) ((base) + 0x01) /* TCO Timer Initial Value */ |
| |
| #define TCO_STS(base) ((base) + 0x04) /* TCO Status Register */ |
| /* |
| * TCO Boot Status bit: set on TCO reset, reset by software or standby |
| * power-good (survives reboots), unfortunately this bit is never |
| * set. |
| */ |
| # define TCO_STS_BOOT_STS (1 << 9) |
| /* |
| * first and 2nd timeout status bits, these also survive a warm boot, |
| * and they work, so we use them. |
| */ |
| # define TCO_STS_TCO_INT_STS (1 << 1) |
| # define TCO_STS_TCO2TO_STS (1 << 10) |
| # define TCO_STS_RESET (TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \ |
| TCO_STS_TCO_INT_STS) |
| |
| #define TCO_CNT(base) ((base) + 0x08) /* TCO Control Register */ |
| # define TCO_CNT_TCOHALT (1 << 12) |
| |
| #define MCP51_SMBUS_SETUP_B 0xe8 |
| # define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25) |
| |
| /* |
| * The SMI_EN register is at the base io address + 0x04, |
| * while TCOBASE is + 0x40. |
| */ |
| #define MCP51_SMI_EN(base) ((base) - 0x40 + 0x04) |
| # define MCP51_SMI_EN_TCO ((1 << 4) | (1 << 5)) |