| /** | 
 |  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI | 
 |  * | 
 |  * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com | 
 |  * Author: Keshava Munegowda <keshava_mgowda@ti.com> | 
 |  * Author: Roger Quadros <rogerq@ti.com> | 
 |  * | 
 |  * This program is free software: you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2  of | 
 |  * the License as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/platform_data/usb-omap.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/err.h> | 
 |  | 
 | #include "omap-usb.h" | 
 |  | 
 | #define USBHS_DRIVER_NAME	"usbhs_omap" | 
 | #define OMAP_EHCI_DEVICE	"ehci-omap" | 
 | #define OMAP_OHCI_DEVICE	"ohci-omap3" | 
 |  | 
 | /* OMAP USBHOST Register addresses  */ | 
 |  | 
 | /* UHH Register Set */ | 
 | #define	OMAP_UHH_REVISION				(0x00) | 
 | #define	OMAP_UHH_SYSCONFIG				(0x10) | 
 | #define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12) | 
 | #define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8) | 
 | #define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3) | 
 | #define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2) | 
 | #define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1) | 
 | #define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0) | 
 |  | 
 | #define	OMAP_UHH_SYSSTATUS				(0x14) | 
 | #define	OMAP_UHH_HOSTCONFIG				(0x40) | 
 | #define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0) | 
 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0) | 
 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11) | 
 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12) | 
 | #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2) | 
 | #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3) | 
 | #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4) | 
 | #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5) | 
 | #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8) | 
 | #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9) | 
 | #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10) | 
 | #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31) | 
 |  | 
 | /* OMAP4-specific defines */ | 
 | #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2) | 
 | #define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2) | 
 | #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4) | 
 | #define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4) | 
 | #define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0) | 
 |  | 
 | #define OMAP4_P1_MODE_CLEAR				(3 << 16) | 
 | #define OMAP4_P1_MODE_TLL				(1 << 16) | 
 | #define OMAP4_P1_MODE_HSIC				(3 << 16) | 
 | #define OMAP4_P2_MODE_CLEAR				(3 << 18) | 
 | #define OMAP4_P2_MODE_TLL				(1 << 18) | 
 | #define OMAP4_P2_MODE_HSIC				(3 << 18) | 
 |  | 
 | #define	OMAP_UHH_DEBUG_CSR				(0x44) | 
 |  | 
 | /* Values of UHH_REVISION - Note: these are not given in the TRM */ | 
 | #define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */ | 
 | #define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */ | 
 |  | 
 | #define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1) | 
 | #define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2) | 
 |  | 
 | #define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY) | 
 | #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL) | 
 | #define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC) | 
 |  | 
 |  | 
 | struct usbhs_hcd_omap { | 
 | 	int				nports; | 
 | 	struct clk			**utmi_clk; | 
 | 	struct clk			**hsic60m_clk; | 
 | 	struct clk			**hsic480m_clk; | 
 |  | 
 | 	struct clk			*xclk60mhsp1_ck; | 
 | 	struct clk			*xclk60mhsp2_ck; | 
 | 	struct clk			*utmi_p1_gfclk; | 
 | 	struct clk			*utmi_p2_gfclk; | 
 | 	struct clk			*init_60m_fclk; | 
 | 	struct clk			*ehci_logic_fck; | 
 |  | 
 | 	void __iomem			*uhh_base; | 
 |  | 
 | 	struct usbhs_omap_platform_data	*pdata; | 
 |  | 
 | 	u32				usbhs_rev; | 
 | }; | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static const char usbhs_driver_name[] = USBHS_DRIVER_NAME; | 
 | static u64 usbhs_dmamask = DMA_BIT_MASK(32); | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) | 
 | { | 
 | 	writel_relaxed(val, base + reg); | 
 | } | 
 |  | 
 | static inline u32 usbhs_read(void __iomem *base, u32 reg) | 
 | { | 
 | 	return readl_relaxed(base + reg); | 
 | } | 
 |  | 
 | /*-------------------------------------------------------------------------*/ | 
 |  | 
 | /** | 
 |  * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h> | 
 |  * to the device tree binding portN-mode found in | 
 |  * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' | 
 |  */ | 
 | static const char * const port_modes[] = { | 
 | 	[OMAP_USBHS_PORT_MODE_UNUSED]	= "", | 
 | 	[OMAP_EHCI_PORT_MODE_PHY]	= "ehci-phy", | 
 | 	[OMAP_EHCI_PORT_MODE_TLL]	= "ehci-tll", | 
 | 	[OMAP_EHCI_PORT_MODE_HSIC]	= "ehci-hsic", | 
 | 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]	= "ohci-phy-6pin-datse0", | 
 | 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]	= "ohci-phy-6pin-dpdm", | 
 | 	[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]	= "ohci-phy-3pin-datse0", | 
 | 	[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]	= "ohci-phy-4pin-dpdm", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]	= "ohci-tll-6pin-datse0", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]	= "ohci-tll-6pin-dpdm", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]	= "ohci-tll-3pin-datse0", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]	= "ohci-tll-4pin-dpdm", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]	= "ohci-tll-2pin-datse0", | 
 | 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]	= "ohci-tll-2pin-dpdm", | 
 | }; | 
 |  | 
 | static struct platform_device *omap_usbhs_alloc_child(const char *name, | 
 | 			struct resource	*res, int num_resources, void *pdata, | 
 | 			size_t pdata_size, struct device *dev) | 
 | { | 
 | 	struct platform_device	*child; | 
 | 	int			ret; | 
 |  | 
 | 	child = platform_device_alloc(name, 0); | 
 |  | 
 | 	if (!child) { | 
 | 		dev_err(dev, "platform_device_alloc %s failed\n", name); | 
 | 		goto err_end; | 
 | 	} | 
 |  | 
 | 	ret = platform_device_add_resources(child, res, num_resources); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "platform_device_add_resources failed\n"); | 
 | 		goto err_alloc; | 
 | 	} | 
 |  | 
 | 	ret = platform_device_add_data(child, pdata, pdata_size); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "platform_device_add_data failed\n"); | 
 | 		goto err_alloc; | 
 | 	} | 
 |  | 
 | 	child->dev.dma_mask		= &usbhs_dmamask; | 
 | 	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); | 
 | 	child->dev.parent		= dev; | 
 |  | 
 | 	ret = platform_device_add(child); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "platform_device_add failed\n"); | 
 | 		goto err_alloc; | 
 | 	} | 
 |  | 
 | 	return child; | 
 |  | 
 | err_alloc: | 
 | 	platform_device_put(child); | 
 |  | 
 | err_end: | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int omap_usbhs_alloc_children(struct platform_device *pdev) | 
 | { | 
 | 	struct device				*dev = &pdev->dev; | 
 | 	struct usbhs_omap_platform_data		*pdata = dev_get_platdata(dev); | 
 | 	struct platform_device			*ehci; | 
 | 	struct platform_device			*ohci; | 
 | 	struct resource				*res; | 
 | 	struct resource				resources[2]; | 
 | 	int					ret; | 
 |  | 
 | 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); | 
 | 	if (!res) { | 
 | 		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_end; | 
 | 	} | 
 | 	resources[0] = *res; | 
 |  | 
 | 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); | 
 | 	if (!res) { | 
 | 		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_end; | 
 | 	} | 
 | 	resources[1] = *res; | 
 |  | 
 | 	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata, | 
 | 		sizeof(*pdata), dev); | 
 |  | 
 | 	if (!ehci) { | 
 | 		dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_end; | 
 | 	} | 
 |  | 
 | 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); | 
 | 	if (!res) { | 
 | 		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_ehci; | 
 | 	} | 
 | 	resources[0] = *res; | 
 |  | 
 | 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); | 
 | 	if (!res) { | 
 | 		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_ehci; | 
 | 	} | 
 | 	resources[1] = *res; | 
 |  | 
 | 	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata, | 
 | 		sizeof(*pdata), dev); | 
 | 	if (!ohci) { | 
 | 		dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_ehci; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_ehci: | 
 | 	platform_device_unregister(ehci); | 
 |  | 
 | err_end: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static bool is_ohci_port(enum usbhs_omap_port_mode pmode) | 
 | { | 
 | 	switch (pmode) { | 
 | 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
 | 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
 | 	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
 | 	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
 | 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
 | 		return true; | 
 |  | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static int usbhs_runtime_resume(struct device *dev) | 
 | { | 
 | 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
 | 	struct usbhs_omap_platform_data	*pdata = omap->pdata; | 
 | 	int i, r; | 
 |  | 
 | 	dev_dbg(dev, "usbhs_runtime_resume\n"); | 
 |  | 
 | 	omap_tll_enable(pdata); | 
 |  | 
 | 	if (!IS_ERR(omap->ehci_logic_fck)) | 
 | 		clk_prepare_enable(omap->ehci_logic_fck); | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		switch (pdata->port_mode[i]) { | 
 | 		case OMAP_EHCI_PORT_MODE_HSIC: | 
 | 			if (!IS_ERR(omap->hsic60m_clk[i])) { | 
 | 				r = clk_prepare_enable(omap->hsic60m_clk[i]); | 
 | 				if (r) { | 
 | 					dev_err(dev, | 
 | 					 "Can't enable port %d hsic60m clk:%d\n", | 
 | 					 i, r); | 
 | 				} | 
 | 			} | 
 |  | 
 | 			if (!IS_ERR(omap->hsic480m_clk[i])) { | 
 | 				r = clk_prepare_enable(omap->hsic480m_clk[i]); | 
 | 				if (r) { | 
 | 					dev_err(dev, | 
 | 					 "Can't enable port %d hsic480m clk:%d\n", | 
 | 					 i, r); | 
 | 				} | 
 | 			} | 
 | 		/* Fall through as HSIC mode needs utmi_clk */ | 
 |  | 
 | 		case OMAP_EHCI_PORT_MODE_TLL: | 
 | 			if (!IS_ERR(omap->utmi_clk[i])) { | 
 | 				r = clk_prepare_enable(omap->utmi_clk[i]); | 
 | 				if (r) { | 
 | 					dev_err(dev, | 
 | 					 "Can't enable port %d clk : %d\n", | 
 | 					 i, r); | 
 | 				} | 
 | 			} | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int usbhs_runtime_suspend(struct device *dev) | 
 | { | 
 | 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
 | 	struct usbhs_omap_platform_data	*pdata = omap->pdata; | 
 | 	int i; | 
 |  | 
 | 	dev_dbg(dev, "usbhs_runtime_suspend\n"); | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		switch (pdata->port_mode[i]) { | 
 | 		case OMAP_EHCI_PORT_MODE_HSIC: | 
 | 			if (!IS_ERR(omap->hsic60m_clk[i])) | 
 | 				clk_disable_unprepare(omap->hsic60m_clk[i]); | 
 |  | 
 | 			if (!IS_ERR(omap->hsic480m_clk[i])) | 
 | 				clk_disable_unprepare(omap->hsic480m_clk[i]); | 
 | 		/* Fall through as utmi_clks were used in HSIC mode */ | 
 |  | 
 | 		case OMAP_EHCI_PORT_MODE_TLL: | 
 | 			if (!IS_ERR(omap->utmi_clk[i])) | 
 | 				clk_disable_unprepare(omap->utmi_clk[i]); | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!IS_ERR(omap->ehci_logic_fck)) | 
 | 		clk_disable_unprepare(omap->ehci_logic_fck); | 
 |  | 
 | 	omap_tll_disable(pdata); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap, | 
 | 						unsigned reg) | 
 | { | 
 | 	struct usbhs_omap_platform_data	*pdata = omap->pdata; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		switch (pdata->port_mode[i]) { | 
 | 		case OMAP_USBHS_PORT_MODE_UNUSED: | 
 | 			reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i); | 
 | 			break; | 
 | 		case OMAP_EHCI_PORT_MODE_PHY: | 
 | 			if (pdata->single_ulpi_bypass) | 
 | 				break; | 
 |  | 
 | 			if (i == 0) | 
 | 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
 | 			else | 
 | 				reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS | 
 | 								<< (i-1)); | 
 | 			break; | 
 | 		default: | 
 | 			if (pdata->single_ulpi_bypass) | 
 | 				break; | 
 |  | 
 | 			if (i == 0) | 
 | 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
 | 			else | 
 | 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS | 
 | 								<< (i-1); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (pdata->single_ulpi_bypass) { | 
 | 		/* bypass ULPI only if none of the ports use PHY mode */ | 
 | 		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
 |  | 
 | 		for (i = 0; i < omap->nports; i++) { | 
 | 			if (is_ehci_phy_mode(pdata->port_mode[i])) { | 
 | 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return reg; | 
 | } | 
 |  | 
 | static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap, | 
 | 						unsigned reg) | 
 | { | 
 | 	struct usbhs_omap_platform_data	*pdata = omap->pdata; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		/* Clear port mode fields for PHY mode */ | 
 | 		reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i); | 
 |  | 
 | 		if (is_ehci_tll_mode(pdata->port_mode[i]) || | 
 | 				(is_ohci_port(pdata->port_mode[i]))) | 
 | 			reg |= OMAP4_P1_MODE_TLL << 2 * i; | 
 | 		else if (is_ehci_hsic_mode(pdata->port_mode[i])) | 
 | 			reg |= OMAP4_P1_MODE_HSIC << 2 * i; | 
 | 	} | 
 |  | 
 | 	return reg; | 
 | } | 
 |  | 
 | static void omap_usbhs_init(struct device *dev) | 
 | { | 
 | 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
 | 	unsigned			reg; | 
 |  | 
 | 	dev_dbg(dev, "starting TI HSUSB Controller\n"); | 
 |  | 
 | 	pm_runtime_get_sync(dev); | 
 |  | 
 | 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); | 
 | 	/* setup ULPI bypass and burst configurations */ | 
 | 	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN | 
 | 			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN | 
 | 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); | 
 | 	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; | 
 | 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; | 
 |  | 
 | 	switch (omap->usbhs_rev) { | 
 | 	case OMAP_USBHS_REV1: | 
 | 		reg = omap_usbhs_rev1_hostconfig(omap, reg); | 
 | 		break; | 
 |  | 
 | 	case OMAP_USBHS_REV2: | 
 | 		reg = omap_usbhs_rev2_hostconfig(omap, reg); | 
 | 		break; | 
 |  | 
 | 	default:	/* newer revisions */ | 
 | 		reg = omap_usbhs_rev2_hostconfig(omap, reg); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); | 
 | 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); | 
 |  | 
 | 	pm_runtime_put_sync(dev); | 
 | } | 
 |  | 
 | static int usbhs_omap_get_dt_pdata(struct device *dev, | 
 | 					struct usbhs_omap_platform_data *pdata) | 
 | { | 
 | 	int ret, i; | 
 | 	struct device_node *node = dev->of_node; | 
 |  | 
 | 	ret = of_property_read_u32(node, "num-ports", &pdata->nports); | 
 | 	if (ret) | 
 | 		pdata->nports = 0; | 
 |  | 
 | 	if (pdata->nports > OMAP3_HS_USB_PORTS) { | 
 | 		dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n", | 
 | 				pdata->nports, OMAP3_HS_USB_PORTS); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* get port modes */ | 
 | 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { | 
 | 		char prop[11]; | 
 | 		const char *mode; | 
 |  | 
 | 		pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED; | 
 |  | 
 | 		snprintf(prop, sizeof(prop), "port%d-mode", i + 1); | 
 | 		ret = of_property_read_string(node, prop, &mode); | 
 | 		if (ret < 0) | 
 | 			continue; | 
 |  | 
 | 		/* get 'enum usbhs_omap_port_mode' from port mode string */ | 
 | 		ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode); | 
 | 		if (ret < 0) { | 
 | 			dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", | 
 | 					i, mode); | 
 | 			return -ENODEV; | 
 | 		} | 
 |  | 
 | 		dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret); | 
 | 		pdata->port_mode[i] = ret; | 
 | 	} | 
 |  | 
 | 	/* get flags */ | 
 | 	pdata->single_ulpi_bypass = of_property_read_bool(node, | 
 | 						"single-ulpi-bypass"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id usbhs_child_match_table[] = { | 
 | 	{ .compatible = "ti,ehci-omap", }, | 
 | 	{ .compatible = "ti,ohci-omap3", }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | /** | 
 |  * usbhs_omap_probe - initialize TI-based HCDs | 
 |  * | 
 |  * Allocates basic resources for this USB host controller. | 
 |  */ | 
 | static int usbhs_omap_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device			*dev =  &pdev->dev; | 
 | 	struct usbhs_omap_platform_data	*pdata = dev_get_platdata(dev); | 
 | 	struct usbhs_hcd_omap		*omap; | 
 | 	struct resource			*res; | 
 | 	int				ret = 0; | 
 | 	int				i; | 
 | 	bool				need_logic_fck; | 
 |  | 
 | 	if (dev->of_node) { | 
 | 		/* For DT boot we populate platform data from OF node */ | 
 | 		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
 | 		if (!pdata) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		ret = usbhs_omap_get_dt_pdata(dev, pdata); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		dev->platform_data = pdata; | 
 | 	} | 
 |  | 
 | 	if (!pdata) { | 
 | 		dev_err(dev, "Missing platform data\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (pdata->nports > OMAP3_HS_USB_PORTS) { | 
 | 		dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n", | 
 | 				pdata->nports, OMAP3_HS_USB_PORTS); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); | 
 | 	if (!omap) { | 
 | 		dev_err(dev, "Memory allocation failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	omap->uhh_base = devm_ioremap_resource(dev, res); | 
 | 	if (IS_ERR(omap->uhh_base)) | 
 | 		return PTR_ERR(omap->uhh_base); | 
 |  | 
 | 	omap->pdata = pdata; | 
 |  | 
 | 	/* Initialize the TLL subsystem */ | 
 | 	omap_tll_init(pdata); | 
 |  | 
 | 	pm_runtime_enable(dev); | 
 |  | 
 | 	platform_set_drvdata(pdev, omap); | 
 | 	pm_runtime_get_sync(dev); | 
 |  | 
 | 	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); | 
 |  | 
 | 	/* we need to call runtime suspend before we update omap->nports | 
 | 	 * to prevent unbalanced clk_disable() | 
 | 	 */ | 
 | 	pm_runtime_put_sync(dev); | 
 |  | 
 | 	/* | 
 | 	 * If platform data contains nports then use that | 
 | 	 * else make out number of ports from USBHS revision | 
 | 	 */ | 
 | 	if (pdata->nports) { | 
 | 		omap->nports = pdata->nports; | 
 | 	} else { | 
 | 		switch (omap->usbhs_rev) { | 
 | 		case OMAP_USBHS_REV1: | 
 | 			omap->nports = 3; | 
 | 			break; | 
 | 		case OMAP_USBHS_REV2: | 
 | 			omap->nports = 2; | 
 | 			break; | 
 | 		default: | 
 | 			omap->nports = OMAP3_HS_USB_PORTS; | 
 | 			dev_dbg(dev, | 
 | 			 "USB HOST Rev:0x%x not recognized, assuming %d ports\n", | 
 | 			 omap->usbhs_rev, omap->nports); | 
 | 			break; | 
 | 		} | 
 | 		pdata->nports = omap->nports; | 
 | 	} | 
 |  | 
 | 	i = sizeof(struct clk *) * omap->nports; | 
 | 	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL); | 
 | 	omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL); | 
 | 	omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL); | 
 |  | 
 | 	if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) { | 
 | 		dev_err(dev, "Memory allocation failed\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	/* Set all clocks as invalid to begin with */ | 
 | 	omap->ehci_logic_fck = ERR_PTR(-ENODEV); | 
 | 	omap->init_60m_fclk = ERR_PTR(-ENODEV); | 
 | 	omap->utmi_p1_gfclk = ERR_PTR(-ENODEV); | 
 | 	omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); | 
 | 	omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV); | 
 | 	omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		omap->utmi_clk[i] = ERR_PTR(-ENODEV); | 
 | 		omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); | 
 | 		omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); | 
 | 	} | 
 |  | 
 | 	/* for OMAP3 i.e. USBHS REV1 */ | 
 | 	if (omap->usbhs_rev == OMAP_USBHS_REV1) { | 
 | 		need_logic_fck = false; | 
 | 		for (i = 0; i < omap->nports; i++) { | 
 | 			if (is_ehci_phy_mode(pdata->port_mode[i]) || | 
 | 			    is_ehci_tll_mode(pdata->port_mode[i]) || | 
 | 			    is_ehci_hsic_mode(pdata->port_mode[i])) | 
 |  | 
 | 				need_logic_fck |= true; | 
 | 		} | 
 |  | 
 | 		if (need_logic_fck) { | 
 | 			omap->ehci_logic_fck = devm_clk_get(dev, | 
 | 							    "usbhost_120m_fck"); | 
 | 			if (IS_ERR(omap->ehci_logic_fck)) { | 
 | 				ret = PTR_ERR(omap->ehci_logic_fck); | 
 | 				dev_err(dev, "usbhost_120m_fck failed:%d\n", | 
 | 					ret); | 
 | 				goto err_mem; | 
 | 			} | 
 | 		} | 
 | 		goto initialize; | 
 | 	} | 
 |  | 
 | 	/* for OMAP4+ i.e. USBHS REV2+ */ | 
 | 	omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk"); | 
 | 	if (IS_ERR(omap->utmi_p1_gfclk)) { | 
 | 		ret = PTR_ERR(omap->utmi_p1_gfclk); | 
 | 		dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk"); | 
 | 	if (IS_ERR(omap->utmi_p2_gfclk)) { | 
 | 		ret = PTR_ERR(omap->utmi_p2_gfclk); | 
 | 		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1"); | 
 | 	if (IS_ERR(omap->xclk60mhsp1_ck)) { | 
 | 		ret = PTR_ERR(omap->xclk60mhsp1_ck); | 
 | 		dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret); | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2"); | 
 | 	if (IS_ERR(omap->xclk60mhsp2_ck)) { | 
 | 		ret = PTR_ERR(omap->xclk60mhsp2_ck); | 
 | 		dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret); | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int"); | 
 | 	if (IS_ERR(omap->init_60m_fclk)) { | 
 | 		ret = PTR_ERR(omap->init_60m_fclk); | 
 | 		dev_err(dev, "refclk_60m_int failed error:%d\n", ret); | 
 | 		goto err_mem; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < omap->nports; i++) { | 
 | 		char clkname[30]; | 
 |  | 
 | 		/* clock names are indexed from 1*/ | 
 | 		snprintf(clkname, sizeof(clkname), | 
 | 				"usb_host_hs_utmi_p%d_clk", i + 1); | 
 |  | 
 | 		/* If a clock is not found we won't bail out as not all | 
 | 		 * platforms have all clocks and we can function without | 
 | 		 * them | 
 | 		 */ | 
 | 		omap->utmi_clk[i] = devm_clk_get(dev, clkname); | 
 | 		if (IS_ERR(omap->utmi_clk[i])) { | 
 | 			ret = PTR_ERR(omap->utmi_clk[i]); | 
 | 			dev_err(dev, "Failed to get clock : %s : %d\n", | 
 | 				clkname, ret); | 
 | 			goto err_mem; | 
 | 		} | 
 |  | 
 | 		snprintf(clkname, sizeof(clkname), | 
 | 				"usb_host_hs_hsic480m_p%d_clk", i + 1); | 
 | 		omap->hsic480m_clk[i] = devm_clk_get(dev, clkname); | 
 | 		if (IS_ERR(omap->hsic480m_clk[i])) { | 
 | 			ret = PTR_ERR(omap->hsic480m_clk[i]); | 
 | 			dev_err(dev, "Failed to get clock : %s : %d\n", | 
 | 				clkname, ret); | 
 | 			goto err_mem; | 
 | 		} | 
 |  | 
 | 		snprintf(clkname, sizeof(clkname), | 
 | 				"usb_host_hs_hsic60m_p%d_clk", i + 1); | 
 | 		omap->hsic60m_clk[i] = devm_clk_get(dev, clkname); | 
 | 		if (IS_ERR(omap->hsic60m_clk[i])) { | 
 | 			ret = PTR_ERR(omap->hsic60m_clk[i]); | 
 | 			dev_err(dev, "Failed to get clock : %s : %d\n", | 
 | 				clkname, ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_ehci_phy_mode(pdata->port_mode[0])) { | 
 | 		ret = clk_set_parent(omap->utmi_p1_gfclk, | 
 | 					omap->xclk60mhsp1_ck); | 
 | 		if (ret != 0) { | 
 | 			dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n", | 
 | 				ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) { | 
 | 		ret = clk_set_parent(omap->utmi_p1_gfclk, | 
 | 					omap->init_60m_fclk); | 
 | 		if (ret != 0) { | 
 | 			dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n", | 
 | 				ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_ehci_phy_mode(pdata->port_mode[1])) { | 
 | 		ret = clk_set_parent(omap->utmi_p2_gfclk, | 
 | 					omap->xclk60mhsp2_ck); | 
 | 		if (ret != 0) { | 
 | 			dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n", | 
 | 				ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) { | 
 | 		ret = clk_set_parent(omap->utmi_p2_gfclk, | 
 | 						omap->init_60m_fclk); | 
 | 		if (ret != 0) { | 
 | 			dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n", | 
 | 				ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} | 
 |  | 
 | initialize: | 
 | 	omap_usbhs_init(dev); | 
 |  | 
 | 	if (dev->of_node) { | 
 | 		ret = of_platform_populate(dev->of_node, | 
 | 				usbhs_child_match_table, NULL, dev); | 
 |  | 
 | 		if (ret) { | 
 | 			dev_err(dev, "Failed to create DT children: %d\n", ret); | 
 | 			goto err_mem; | 
 | 		} | 
 |  | 
 | 	} else { | 
 | 		ret = omap_usbhs_alloc_children(pdev); | 
 | 		if (ret) { | 
 | 			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", | 
 | 						ret); | 
 | 			goto err_mem; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_mem: | 
 | 	pm_runtime_disable(dev); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int usbhs_omap_remove_child(struct device *dev, void *data) | 
 | { | 
 | 	dev_info(dev, "unregistering\n"); | 
 | 	platform_device_unregister(to_platform_device(dev)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs | 
 |  * @pdev: USB Host Controller being removed | 
 |  * | 
 |  * Reverses the effect of usbhs_omap_probe(). | 
 |  */ | 
 | static int usbhs_omap_remove(struct platform_device *pdev) | 
 | { | 
 | 	pm_runtime_disable(&pdev->dev); | 
 |  | 
 | 	/* remove children */ | 
 | 	device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dev_pm_ops usbhsomap_dev_pm_ops = { | 
 | 	.runtime_suspend	= usbhs_runtime_suspend, | 
 | 	.runtime_resume		= usbhs_runtime_resume, | 
 | }; | 
 |  | 
 | static const struct of_device_id usbhs_omap_dt_ids[] = { | 
 | 	{ .compatible = "ti,usbhs-host" }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids); | 
 |  | 
 |  | 
 | static struct platform_driver usbhs_omap_driver = { | 
 | 	.driver = { | 
 | 		.name		= (char *)usbhs_driver_name, | 
 | 		.pm		= &usbhsomap_dev_pm_ops, | 
 | 		.of_match_table = usbhs_omap_dt_ids, | 
 | 	}, | 
 | 	.probe		= usbhs_omap_probe, | 
 | 	.remove		= usbhs_omap_remove, | 
 | }; | 
 |  | 
 | MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); | 
 | MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); | 
 | MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); | 
 |  | 
 | static int omap_usbhs_drvinit(void) | 
 | { | 
 | 	return platform_driver_register(&usbhs_omap_driver); | 
 | } | 
 |  | 
 | /* | 
 |  * init before ehci and ohci drivers; | 
 |  * The usbhs core driver should be initialized much before | 
 |  * the omap ehci and ohci probe functions are called. | 
 |  * This usbhs core driver should be initialized after | 
 |  * usb tll driver | 
 |  */ | 
 | fs_initcall_sync(omap_usbhs_drvinit); | 
 |  | 
 | static void omap_usbhs_drvexit(void) | 
 | { | 
 | 	platform_driver_unregister(&usbhs_omap_driver); | 
 | } | 
 | module_exit(omap_usbhs_drvexit); |