| // SPDX-License-Identifier: GPL-1.0+ | 
 | /* generic HDLC line discipline for Linux | 
 |  * | 
 |  * Written by Paul Fulghum paulkf@microgate.com | 
 |  * for Microgate Corporation | 
 |  * | 
 |  * Microgate and SyncLink are registered trademarks of Microgate Corporation | 
 |  * | 
 |  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>, | 
 |  *	Al Longyear <longyear@netcom.com>, | 
 |  *	Paul Mackerras <Paul.Mackerras@cs.anu.edu.au> | 
 |  * | 
 |  * Original release 01/11/99 | 
 |  * | 
 |  * This module implements the tty line discipline N_HDLC for use with | 
 |  * tty device drivers that support bit-synchronous HDLC communications. | 
 |  * | 
 |  * All HDLC data is frame oriented which means: | 
 |  * | 
 |  * 1. tty write calls represent one complete transmit frame of data | 
 |  *    The device driver should accept the complete frame or none of  | 
 |  *    the frame (busy) in the write method. Each write call should have | 
 |  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame | 
 |  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535 | 
 |  *    should include any crc bytes required. For example, when using | 
 |  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame | 
 |  *    the application may transmit is limited to 65531 bytes. For CCITT | 
 |  *    CRC16, the maximum application frame size would be 65533. | 
 |  * | 
 |  * | 
 |  * 2. receive callbacks from the device driver represents | 
 |  *    one received frame. The device driver should bypass | 
 |  *    the tty flip buffer and call the line discipline receive | 
 |  *    callback directly to avoid fragmenting or concatenating | 
 |  *    multiple frames into a single receive callback. | 
 |  * | 
 |  *    The HDLC line discipline queues the receive frames in separate | 
 |  *    buffers so complete receive frames can be returned by the | 
 |  *    tty read calls. | 
 |  * | 
 |  * 3. tty read calls returns an entire frame of data or nothing. | 
 |  *     | 
 |  * 4. all send and receive data is considered raw. No processing | 
 |  *    or translation is performed by the line discipline, regardless | 
 |  *    of the tty flags | 
 |  * | 
 |  * 5. When line discipline is queried for the amount of receive | 
 |  *    data available (FIOC), 0 is returned if no data available, | 
 |  *    otherwise the count of the next available frame is returned. | 
 |  *    (instead of the sum of all received frame counts). | 
 |  * | 
 |  * These conventions allow the standard tty programming interface | 
 |  * to be used for synchronous HDLC applications when used with | 
 |  * this line discipline (or another line discipline that is frame | 
 |  * oriented such as N_PPP). | 
 |  * | 
 |  * The SyncLink driver (synclink.c) implements both asynchronous | 
 |  * (using standard line discipline N_TTY) and synchronous HDLC | 
 |  * (using N_HDLC) communications, with the latter using the above | 
 |  * conventions. | 
 |  * | 
 |  * This implementation is very basic and does not maintain | 
 |  * any statistics. The main point is to enforce the raw data | 
 |  * and frame orientation of HDLC communications. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
 |  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
 |  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | 
 |  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | 
 |  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | 
 |  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | 
 |  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
 |  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | 
 |  * OF THE POSSIBILITY OF SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #define HDLC_MAGIC 0x239e | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/types.h> | 
 | #include <linux/fcntl.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/ptrace.h> | 
 |  | 
 | #undef VERSION | 
 | #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch)) | 
 |  | 
 | #include <linux/poll.h> | 
 | #include <linux/in.h> | 
 | #include <linux/ioctl.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/string.h>	/* used in new tty drivers */ | 
 | #include <linux/signal.h>	/* used in new tty drivers */ | 
 | #include <linux/if.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include <asm/termios.h> | 
 | #include <linux/uaccess.h> | 
 |  | 
 | /* | 
 |  * Buffers for individual HDLC frames | 
 |  */ | 
 | #define MAX_HDLC_FRAME_SIZE 65535  | 
 | #define DEFAULT_RX_BUF_COUNT 10 | 
 | #define MAX_RX_BUF_COUNT 60 | 
 | #define DEFAULT_TX_BUF_COUNT 3 | 
 |  | 
 | struct n_hdlc_buf { | 
 | 	struct list_head  list_item; | 
 | 	int		  count; | 
 | 	char		  buf[1]; | 
 | }; | 
 |  | 
 | #define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe) | 
 |  | 
 | struct n_hdlc_buf_list { | 
 | 	struct list_head  list; | 
 | 	int		  count; | 
 | 	spinlock_t	  spinlock; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct n_hdlc - per device instance data structure | 
 |  * @magic - magic value for structure | 
 |  * @flags - miscellaneous control flags | 
 |  * @tty - ptr to TTY structure | 
 |  * @backup_tty - TTY to use if tty gets closed | 
 |  * @tbusy - reentrancy flag for tx wakeup code | 
 |  * @woke_up - FIXME: describe this field | 
 |  * @tx_buf_list - list of pending transmit frame buffers | 
 |  * @rx_buf_list - list of received frame buffers | 
 |  * @tx_free_buf_list - list unused transmit frame buffers | 
 |  * @rx_free_buf_list - list unused received frame buffers | 
 |  */ | 
 | struct n_hdlc { | 
 | 	int			magic; | 
 | 	__u32			flags; | 
 | 	struct tty_struct	*tty; | 
 | 	struct tty_struct	*backup_tty; | 
 | 	int			tbusy; | 
 | 	int			woke_up; | 
 | 	struct n_hdlc_buf_list	tx_buf_list; | 
 | 	struct n_hdlc_buf_list	rx_buf_list; | 
 | 	struct n_hdlc_buf_list	tx_free_buf_list; | 
 | 	struct n_hdlc_buf_list	rx_free_buf_list; | 
 | }; | 
 |  | 
 | /* | 
 |  * HDLC buffer list manipulation functions | 
 |  */ | 
 | static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, | 
 | 						struct n_hdlc_buf *buf); | 
 | static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, | 
 | 			   struct n_hdlc_buf *buf); | 
 | static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list); | 
 |  | 
 | /* Local functions */ | 
 |  | 
 | static struct n_hdlc *n_hdlc_alloc (void); | 
 |  | 
 | /* debug level can be set by insmod for debugging purposes */ | 
 | #define DEBUG_LEVEL_INFO	1 | 
 | static int debuglevel; | 
 |  | 
 | /* max frame size for memory allocations */ | 
 | static int maxframe = 4096; | 
 |  | 
 | /* TTY callbacks */ | 
 |  | 
 | static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, | 
 | 			   __u8 __user *buf, size_t nr); | 
 | static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, | 
 | 			    const unsigned char *buf, size_t nr); | 
 | static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, | 
 | 			    unsigned int cmd, unsigned long arg); | 
 | static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, | 
 | 				    poll_table *wait); | 
 | static int n_hdlc_tty_open(struct tty_struct *tty); | 
 | static void n_hdlc_tty_close(struct tty_struct *tty); | 
 | static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, | 
 | 			       char *fp, int count); | 
 | static void n_hdlc_tty_wakeup(struct tty_struct *tty); | 
 |  | 
 | #define bset(p,b)	((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) | 
 |  | 
 | #define tty2n_hdlc(tty)	((struct n_hdlc *) ((tty)->disc_data)) | 
 | #define n_hdlc2tty(n_hdlc)	((n_hdlc)->tty) | 
 |  | 
 | static void flush_rx_queue(struct tty_struct *tty) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | 
 | 	struct n_hdlc_buf *buf; | 
 |  | 
 | 	while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list))) | 
 | 		n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf); | 
 | } | 
 |  | 
 | static void flush_tx_queue(struct tty_struct *tty) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | 
 | 	struct n_hdlc_buf *buf; | 
 |  | 
 | 	while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list))) | 
 | 		n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf); | 
 | } | 
 |  | 
 | static struct tty_ldisc_ops n_hdlc_ldisc = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.magic		= TTY_LDISC_MAGIC, | 
 | 	.name		= "hdlc", | 
 | 	.open		= n_hdlc_tty_open, | 
 | 	.close		= n_hdlc_tty_close, | 
 | 	.read		= n_hdlc_tty_read, | 
 | 	.write		= n_hdlc_tty_write, | 
 | 	.ioctl		= n_hdlc_tty_ioctl, | 
 | 	.poll		= n_hdlc_tty_poll, | 
 | 	.receive_buf	= n_hdlc_tty_receive, | 
 | 	.write_wakeup	= n_hdlc_tty_wakeup, | 
 | 	.flush_buffer   = flush_rx_queue, | 
 | }; | 
 |  | 
 | /** | 
 |  * n_hdlc_release - release an n_hdlc per device line discipline info structure | 
 |  * @n_hdlc - per device line discipline info structure | 
 |  */ | 
 | static void n_hdlc_release(struct n_hdlc *n_hdlc) | 
 | { | 
 | 	struct tty_struct *tty = n_hdlc2tty (n_hdlc); | 
 | 	struct n_hdlc_buf *buf; | 
 | 	 | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	/* Ensure that the n_hdlcd process is not hanging on select()/poll() */ | 
 | 	wake_up_interruptible (&tty->read_wait); | 
 | 	wake_up_interruptible (&tty->write_wait); | 
 |  | 
 | 	if (tty->disc_data == n_hdlc) | 
 | 		tty->disc_data = NULL;	/* Break the tty->n_hdlc link */ | 
 |  | 
 | 	/* Release transmit and receive buffers */ | 
 | 	for(;;) { | 
 | 		buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); | 
 | 		if (buf) { | 
 | 			kfree(buf); | 
 | 		} else | 
 | 			break; | 
 | 	} | 
 | 	for(;;) { | 
 | 		buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); | 
 | 		if (buf) { | 
 | 			kfree(buf); | 
 | 		} else | 
 | 			break; | 
 | 	} | 
 | 	for(;;) { | 
 | 		buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); | 
 | 		if (buf) { | 
 | 			kfree(buf); | 
 | 		} else | 
 | 			break; | 
 | 	} | 
 | 	for(;;) { | 
 | 		buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | 
 | 		if (buf) { | 
 | 			kfree(buf); | 
 | 		} else | 
 | 			break; | 
 | 	} | 
 | 	kfree(n_hdlc); | 
 | 	 | 
 | }	/* end of n_hdlc_release() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_close - line discipline close | 
 |  * @tty - pointer to tty info structure | 
 |  * | 
 |  * Called when the line discipline is changed to something | 
 |  * else, the tty is closed, or the tty detects a hangup. | 
 |  */ | 
 | static void n_hdlc_tty_close(struct tty_struct *tty) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	if (n_hdlc != NULL) { | 
 | 		if (n_hdlc->magic != HDLC_MAGIC) { | 
 | 			printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n"); | 
 | 			return; | 
 | 		} | 
 | #if defined(TTY_NO_WRITE_SPLIT) | 
 | 		clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags); | 
 | #endif | 
 | 		tty->disc_data = NULL; | 
 | 		if (tty == n_hdlc->backup_tty) | 
 | 			n_hdlc->backup_tty = NULL; | 
 | 		if (tty != n_hdlc->tty) | 
 | 			return; | 
 | 		if (n_hdlc->backup_tty) { | 
 | 			n_hdlc->tty = n_hdlc->backup_tty; | 
 | 		} else { | 
 | 			n_hdlc_release (n_hdlc); | 
 | 		} | 
 | 	} | 
 | 	 | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__); | 
 | 		 | 
 | }	/* end of n_hdlc_tty_close() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_open - called when line discipline changed to n_hdlc | 
 |  * @tty - pointer to tty info structure | 
 |  * | 
 |  * Returns 0 if success, otherwise error code | 
 |  */ | 
 | static int n_hdlc_tty_open (struct tty_struct *tty) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n", | 
 | 		__FILE__,__LINE__, | 
 | 		tty->name); | 
 | 		 | 
 | 	/* There should not be an existing table for this slot. */ | 
 | 	if (n_hdlc) { | 
 | 		printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" ); | 
 | 		return -EEXIST; | 
 | 	} | 
 | 	 | 
 | 	n_hdlc = n_hdlc_alloc(); | 
 | 	if (!n_hdlc) { | 
 | 		printk (KERN_ERR "n_hdlc_alloc failed\n"); | 
 | 		return -ENFILE; | 
 | 	} | 
 | 		 | 
 | 	tty->disc_data = n_hdlc; | 
 | 	n_hdlc->tty    = tty; | 
 | 	tty->receive_room = 65536; | 
 | 	 | 
 | #if defined(TTY_NO_WRITE_SPLIT) | 
 | 	/* change tty_io write() to not split large writes into 8K chunks */ | 
 | 	set_bit(TTY_NO_WRITE_SPLIT,&tty->flags); | 
 | #endif | 
 | 	 | 
 | 	/* flush receive data from driver */ | 
 | 	tty_driver_flush_buffer(tty); | 
 | 		 | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	return 0; | 
 | 	 | 
 | }	/* end of n_tty_hdlc_open() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_send_frames - send frames on pending send buffer list | 
 |  * @n_hdlc - pointer to ldisc instance data | 
 |  * @tty - pointer to tty instance data | 
 |  * | 
 |  * Send frames on pending send buffer list until the driver does not accept a | 
 |  * frame (busy) this function is called after adding a frame to the send buffer | 
 |  * list and by the tty wakeup callback. | 
 |  */ | 
 | static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) | 
 | { | 
 | 	register int actual; | 
 | 	unsigned long flags; | 
 | 	struct n_hdlc_buf *tbuf; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__); | 
 |  check_again: | 
 | 		 | 
 |  	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); | 
 | 	if (n_hdlc->tbusy) { | 
 | 		n_hdlc->woke_up = 1; | 
 |  		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); | 
 | 		return; | 
 | 	} | 
 | 	n_hdlc->tbusy = 1; | 
 | 	n_hdlc->woke_up = 0; | 
 | 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); | 
 |  | 
 | 	tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | 
 | 	while (tbuf) { | 
 | 		if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 			printk("%s(%d)sending frame %p, count=%d\n", | 
 | 				__FILE__,__LINE__,tbuf,tbuf->count); | 
 | 			 | 
 | 		/* Send the next block of data to device */ | 
 | 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | 
 | 		actual = tty->ops->write(tty, tbuf->buf, tbuf->count); | 
 |  | 
 | 		/* rollback was possible and has been done */ | 
 | 		if (actual == -ERESTARTSYS) { | 
 | 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); | 
 | 			break; | 
 | 		} | 
 | 		/* if transmit error, throw frame away by */ | 
 | 		/* pretending it was accepted by driver */ | 
 | 		if (actual < 0) | 
 | 			actual = tbuf->count; | 
 | 		 | 
 | 		if (actual == tbuf->count) { | 
 | 			if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 				printk("%s(%d)frame %p completed\n", | 
 | 					__FILE__,__LINE__,tbuf); | 
 | 					 | 
 | 			/* free current transmit buffer */ | 
 | 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf); | 
 |  | 
 | 			/* wait up sleeping writers */ | 
 | 			wake_up_interruptible(&tty->write_wait); | 
 | 	 | 
 | 			/* get next pending transmit buffer */ | 
 | 			tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | 
 | 		} else { | 
 | 			if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 				printk("%s(%d)frame %p pending\n", | 
 | 					__FILE__,__LINE__,tbuf); | 
 |  | 
 | 			/* | 
 | 			 * the buffer was not accepted by driver, | 
 | 			 * return it back into tx queue | 
 | 			 */ | 
 | 			n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	 | 
 | 	if (!tbuf) | 
 | 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | 
 | 	 | 
 | 	/* Clear the re-entry flag */ | 
 | 	spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); | 
 | 	n_hdlc->tbusy = 0; | 
 | 	spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);  | 
 | 	 | 
 |         if (n_hdlc->woke_up) | 
 | 	  goto check_again; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__); | 
 | 		 | 
 | }	/* end of n_hdlc_send_frames() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_wakeup - Callback for transmit wakeup | 
 |  * @tty	- pointer to associated tty instance data | 
 |  * | 
 |  * Called when low level device driver can accept more send data. | 
 |  */ | 
 | static void n_hdlc_tty_wakeup(struct tty_struct *tty) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	if (!n_hdlc) | 
 | 		return; | 
 |  | 
 | 	if (tty != n_hdlc->tty) { | 
 | 		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	n_hdlc_send_frames (n_hdlc, tty); | 
 | 		 | 
 | }	/* end of n_hdlc_tty_wakeup() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_receive - Called by tty driver when receive data is available | 
 |  * @tty	- pointer to tty instance data | 
 |  * @data - pointer to received data | 
 |  * @flags - pointer to flags for data | 
 |  * @count - count of received data in bytes | 
 |  * | 
 |  * Called by tty low level driver when receive data is available. Data is | 
 |  * interpreted as one HDLC frame. | 
 |  */ | 
 | static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, | 
 | 			       char *flags, int count) | 
 | { | 
 | 	register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 | 	register struct n_hdlc_buf *buf; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_receive() called count=%d\n", | 
 | 			__FILE__,__LINE__, count); | 
 | 		 | 
 | 	/* This can happen if stuff comes in on the backup tty */ | 
 | 	if (!n_hdlc || tty != n_hdlc->tty) | 
 | 		return; | 
 | 		 | 
 | 	/* verify line is using HDLC discipline */ | 
 | 	if (n_hdlc->magic != HDLC_MAGIC) { | 
 | 		printk("%s(%d) line not using HDLC discipline\n", | 
 | 			__FILE__,__LINE__); | 
 | 		return; | 
 | 	} | 
 | 	 | 
 | 	if ( count>maxframe ) { | 
 | 		if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 			printk("%s(%d) rx count>maxframesize, data discarded\n", | 
 | 			       __FILE__,__LINE__); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* get a free HDLC buffer */	 | 
 | 	buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); | 
 | 	if (!buf) { | 
 | 		/* no buffers in free list, attempt to allocate another rx buffer */ | 
 | 		/* unless the maximum count has been reached */ | 
 | 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT) | 
 | 			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC); | 
 | 	} | 
 | 	 | 
 | 	if (!buf) { | 
 | 		if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 			printk("%s(%d) no more rx buffers, data discarded\n", | 
 | 			       __FILE__,__LINE__); | 
 | 		return; | 
 | 	} | 
 | 		 | 
 | 	/* copy received data to HDLC buffer */ | 
 | 	memcpy(buf->buf,data,count); | 
 | 	buf->count=count; | 
 |  | 
 | 	/* add HDLC buffer to list of received frames */ | 
 | 	n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf); | 
 | 	 | 
 | 	/* wake up any blocked reads and perform async signalling */ | 
 | 	wake_up_interruptible (&tty->read_wait); | 
 | 	if (n_hdlc->tty->fasync != NULL) | 
 | 		kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); | 
 |  | 
 | }	/* end of n_hdlc_tty_receive() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_read - Called to retrieve one frame of data (if available) | 
 |  * @tty - pointer to tty instance data | 
 |  * @file - pointer to open file object | 
 |  * @buf - pointer to returned data buffer | 
 |  * @nr - size of returned data buffer | 
 |  * 	 | 
 |  * Returns the number of bytes returned or error code. | 
 |  */ | 
 | static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, | 
 | 			   __u8 __user *buf, size_t nr) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | 
 | 	int ret = 0; | 
 | 	struct n_hdlc_buf *rbuf; | 
 | 	DECLARE_WAITQUEUE(wait, current); | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	/* Validate the pointers */ | 
 | 	if (!n_hdlc) | 
 | 		return -EIO; | 
 |  | 
 | 	/* verify user access to buffer */ | 
 | 	if (!access_ok(VERIFY_WRITE, buf, nr)) { | 
 | 		printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user " | 
 | 		"buffer\n", __FILE__, __LINE__); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	add_wait_queue(&tty->read_wait, &wait); | 
 |  | 
 | 	for (;;) { | 
 | 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { | 
 | 			ret = -EIO; | 
 | 			break; | 
 | 		} | 
 | 		if (tty_hung_up_p(file)) | 
 | 			break; | 
 |  | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 |  | 
 | 		rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); | 
 | 		if (rbuf) { | 
 | 			if (rbuf->count > nr) { | 
 | 				/* too large for caller's buffer */ | 
 | 				ret = -EOVERFLOW; | 
 | 			} else { | 
 | 				__set_current_state(TASK_RUNNING); | 
 | 				if (copy_to_user(buf, rbuf->buf, rbuf->count)) | 
 | 					ret = -EFAULT; | 
 | 				else | 
 | 					ret = rbuf->count; | 
 | 			} | 
 |  | 
 | 			if (n_hdlc->rx_free_buf_list.count > | 
 | 			    DEFAULT_RX_BUF_COUNT) | 
 | 				kfree(rbuf); | 
 | 			else | 
 | 				n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); | 
 | 			break; | 
 | 		} | 
 | 			 | 
 | 		/* no data */ | 
 | 		if (tty_io_nonblock(tty, file)) { | 
 | 			ret = -EAGAIN; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		schedule(); | 
 |  | 
 | 		if (signal_pending(current)) { | 
 | 			ret = -EINTR; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	remove_wait_queue(&tty->read_wait, &wait); | 
 | 	__set_current_state(TASK_RUNNING); | 
 |  | 
 | 	return ret; | 
 | 	 | 
 | }	/* end of n_hdlc_tty_read() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_write - write a single frame of data to device | 
 |  * @tty	- pointer to associated tty device instance data | 
 |  * @file - pointer to file object data | 
 |  * @data - pointer to transmit data (one frame) | 
 |  * @count - size of transmit frame in bytes | 
 |  * 		 | 
 |  * Returns the number of bytes written (or error code). | 
 |  */ | 
 | static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, | 
 | 			    const unsigned char *data, size_t count) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 | 	int error = 0; | 
 | 	DECLARE_WAITQUEUE(wait, current); | 
 | 	struct n_hdlc_buf *tbuf; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_write() called count=%zd\n", | 
 | 			__FILE__,__LINE__,count); | 
 | 		 | 
 | 	/* Verify pointers */ | 
 | 	if (!n_hdlc) | 
 | 		return -EIO; | 
 |  | 
 | 	if (n_hdlc->magic != HDLC_MAGIC) | 
 | 		return -EIO; | 
 |  | 
 | 	/* verify frame size */ | 
 | 	if (count > maxframe ) { | 
 | 		if (debuglevel & DEBUG_LEVEL_INFO) | 
 | 			printk (KERN_WARNING | 
 | 				"n_hdlc_tty_write: truncating user packet " | 
 | 				"from %lu to %d\n", (unsigned long) count, | 
 | 				maxframe ); | 
 | 		count = maxframe; | 
 | 	} | 
 | 	 | 
 | 	add_wait_queue(&tty->write_wait, &wait); | 
 |  | 
 | 	for (;;) { | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 | 	 | 
 | 		tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); | 
 | 		if (tbuf) | 
 | 			break; | 
 |  | 
 | 		if (tty_io_nonblock(tty, file)) { | 
 | 			error = -EAGAIN; | 
 | 			break; | 
 | 		} | 
 | 		schedule(); | 
 | 			 | 
 | 		n_hdlc = tty2n_hdlc (tty); | 
 | 		if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||  | 
 | 		    tty != n_hdlc->tty) { | 
 | 			printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc); | 
 | 			error = -EIO; | 
 | 			break; | 
 | 		} | 
 | 			 | 
 | 		if (signal_pending(current)) { | 
 | 			error = -EINTR; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	__set_current_state(TASK_RUNNING); | 
 | 	remove_wait_queue(&tty->write_wait, &wait); | 
 |  | 
 | 	if (!error) {		 | 
 | 		/* Retrieve the user's buffer */ | 
 | 		memcpy(tbuf->buf, data, count); | 
 |  | 
 | 		/* Send the data */ | 
 | 		tbuf->count = error = count; | 
 | 		n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); | 
 | 		n_hdlc_send_frames(n_hdlc,tty); | 
 | 	} | 
 |  | 
 | 	return error; | 
 | 	 | 
 | }	/* end of n_hdlc_tty_write() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device. | 
 |  * @tty - pointer to tty instance data | 
 |  * @file - pointer to open file object for device | 
 |  * @cmd - IOCTL command code | 
 |  * @arg - argument for IOCTL call (cmd dependent) | 
 |  * | 
 |  * Returns command dependent result. | 
 |  */ | 
 | static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, | 
 | 			    unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 | 	int error = 0; | 
 | 	int count; | 
 | 	unsigned long flags; | 
 | 	struct n_hdlc_buf *buf = NULL; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_ioctl() called %d\n", | 
 | 			__FILE__,__LINE__,cmd); | 
 | 		 | 
 | 	/* Verify the status of the device */ | 
 | 	if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC) | 
 | 		return -EBADF; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case FIONREAD: | 
 | 		/* report count of read data available */ | 
 | 		/* in next available frame (if any) */ | 
 | 		spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags); | 
 | 		buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list, | 
 | 						struct n_hdlc_buf, list_item); | 
 | 		if (buf) | 
 | 			count = buf->count; | 
 | 		else | 
 | 			count = 0; | 
 | 		spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags); | 
 | 		error = put_user(count, (int __user *)arg); | 
 | 		break; | 
 |  | 
 | 	case TIOCOUTQ: | 
 | 		/* get the pending tx byte count in the driver */ | 
 | 		count = tty_chars_in_buffer(tty); | 
 | 		/* add size of next output frame in queue */ | 
 | 		spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags); | 
 | 		buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list, | 
 | 						struct n_hdlc_buf, list_item); | 
 | 		if (buf) | 
 | 			count += buf->count; | 
 | 		spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags); | 
 | 		error = put_user(count, (int __user *)arg); | 
 | 		break; | 
 |  | 
 | 	case TCFLSH: | 
 | 		switch (arg) { | 
 | 		case TCIOFLUSH: | 
 | 		case TCOFLUSH: | 
 | 			flush_tx_queue(tty); | 
 | 		} | 
 | 		/* fall through to default */ | 
 |  | 
 | 	default: | 
 | 		error = n_tty_ioctl_helper(tty, file, cmd, arg); | 
 | 		break; | 
 | 	} | 
 | 	return error; | 
 | 	 | 
 | }	/* end of n_hdlc_tty_ioctl() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_tty_poll - TTY callback for poll system call | 
 |  * @tty - pointer to tty instance data | 
 |  * @filp - pointer to open file object for device | 
 |  * @poll_table - wait queue for operations | 
 |  *  | 
 |  * Determine which operations (read/write) will not block and return info | 
 |  * to caller. | 
 |  * Returns a bit mask containing info on which ops will not block. | 
 |  */ | 
 | static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, | 
 | 				    poll_table *wait) | 
 | { | 
 | 	struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | 
 | 	__poll_t mask = 0; | 
 |  | 
 | 	if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 		printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__); | 
 | 		 | 
 | 	if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) { | 
 | 		/* queue current process into any wait queue that */ | 
 | 		/* may awaken in the future (read and write) */ | 
 |  | 
 | 		poll_wait(filp, &tty->read_wait, wait); | 
 | 		poll_wait(filp, &tty->write_wait, wait); | 
 |  | 
 | 		/* set bits for operations that won't block */ | 
 | 		if (!list_empty(&n_hdlc->rx_buf_list.list)) | 
 | 			mask |= EPOLLIN | EPOLLRDNORM;	/* readable */ | 
 | 		if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) | 
 | 			mask |= EPOLLHUP; | 
 | 		if (tty_hung_up_p(filp)) | 
 | 			mask |= EPOLLHUP; | 
 | 		if (!tty_is_writelocked(tty) && | 
 | 				!list_empty(&n_hdlc->tx_free_buf_list.list)) | 
 | 			mask |= EPOLLOUT | EPOLLWRNORM;	/* writable */ | 
 | 	} | 
 | 	return mask; | 
 | }	/* end of n_hdlc_tty_poll() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_alloc - allocate an n_hdlc instance data structure | 
 |  * | 
 |  * Returns a pointer to newly created structure if success, otherwise %NULL | 
 |  */ | 
 | static struct n_hdlc *n_hdlc_alloc(void) | 
 | { | 
 | 	struct n_hdlc_buf *buf; | 
 | 	int i; | 
 | 	struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL); | 
 |  | 
 | 	if (!n_hdlc) | 
 | 		return NULL; | 
 |  | 
 | 	spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock); | 
 | 	spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock); | 
 | 	spin_lock_init(&n_hdlc->rx_buf_list.spinlock); | 
 | 	spin_lock_init(&n_hdlc->tx_buf_list.spinlock); | 
 |  | 
 | 	INIT_LIST_HEAD(&n_hdlc->rx_free_buf_list.list); | 
 | 	INIT_LIST_HEAD(&n_hdlc->tx_free_buf_list.list); | 
 | 	INIT_LIST_HEAD(&n_hdlc->rx_buf_list.list); | 
 | 	INIT_LIST_HEAD(&n_hdlc->tx_buf_list.list); | 
 |  | 
 | 	/* allocate free rx buffer list */ | 
 | 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) { | 
 | 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); | 
 | 		if (buf) | 
 | 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf); | 
 | 		else if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i); | 
 | 	} | 
 | 	 | 
 | 	/* allocate free tx buffer list */ | 
 | 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) { | 
 | 		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); | 
 | 		if (buf) | 
 | 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf); | 
 | 		else if (debuglevel >= DEBUG_LEVEL_INFO)	 | 
 | 			printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i); | 
 | 	} | 
 | 	 | 
 | 	/* Initialize the control block */ | 
 | 	n_hdlc->magic  = HDLC_MAGIC; | 
 | 	n_hdlc->flags  = 0; | 
 | 	 | 
 | 	return n_hdlc; | 
 | 	 | 
 | }	/* end of n_hdlc_alloc() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_buf_return - put the HDLC buffer after the head of the specified list | 
 |  * @buf_list - pointer to the buffer list | 
 |  * @buf - pointer to the buffer | 
 |  */ | 
 | static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, | 
 | 						struct n_hdlc_buf *buf) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&buf_list->spinlock, flags); | 
 |  | 
 | 	list_add(&buf->list_item, &buf_list->list); | 
 | 	buf_list->count++; | 
 |  | 
 | 	spin_unlock_irqrestore(&buf_list->spinlock, flags); | 
 | } | 
 |  | 
 | /** | 
 |  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list | 
 |  * @buf_list - pointer to buffer list | 
 |  * @buf	- pointer to buffer | 
 |  */ | 
 | static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list, | 
 | 			   struct n_hdlc_buf *buf) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&buf_list->spinlock, flags); | 
 |  | 
 | 	list_add_tail(&buf->list_item, &buf_list->list); | 
 | 	buf_list->count++; | 
 |  | 
 | 	spin_unlock_irqrestore(&buf_list->spinlock, flags); | 
 | }	/* end of n_hdlc_buf_put() */ | 
 |  | 
 | /** | 
 |  * n_hdlc_buf_get - remove and return an HDLC buffer from list | 
 |  * @buf_list - pointer to HDLC buffer list | 
 |  *  | 
 |  * Remove and return an HDLC buffer from the head of the specified HDLC buffer | 
 |  * list. | 
 |  * Returns a pointer to HDLC buffer if available, otherwise %NULL. | 
 |  */ | 
 | static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct n_hdlc_buf *buf; | 
 |  | 
 | 	spin_lock_irqsave(&buf_list->spinlock, flags); | 
 |  | 
 | 	buf = list_first_entry_or_null(&buf_list->list, | 
 | 						struct n_hdlc_buf, list_item); | 
 | 	if (buf) { | 
 | 		list_del(&buf->list_item); | 
 | 		buf_list->count--; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&buf_list->spinlock, flags); | 
 | 	return buf; | 
 | }	/* end of n_hdlc_buf_get() */ | 
 |  | 
 | static const char hdlc_banner[] __initconst = | 
 | 	KERN_INFO "HDLC line discipline maxframe=%u\n"; | 
 | static const char hdlc_register_ok[] __initconst = | 
 | 	KERN_INFO "N_HDLC line discipline registered.\n"; | 
 | static const char hdlc_register_fail[] __initconst = | 
 | 	KERN_ERR "error registering line discipline: %d\n"; | 
 |  | 
 | static int __init n_hdlc_init(void) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	/* range check maxframe arg */ | 
 | 	if (maxframe < 4096) | 
 | 		maxframe = 4096; | 
 | 	else if (maxframe > 65535) | 
 | 		maxframe = 65535; | 
 |  | 
 | 	printk(hdlc_banner, maxframe); | 
 |  | 
 | 	status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); | 
 | 	if (!status) | 
 | 		printk(hdlc_register_ok); | 
 | 	else | 
 | 		printk(hdlc_register_fail, status); | 
 |  | 
 | 	return status; | 
 | 	 | 
 | }	/* end of init_module() */ | 
 |  | 
 | #ifdef CONFIG_SPARC | 
 | #undef __exitdata | 
 | #define __exitdata | 
 | #endif | 
 |  | 
 | static const char hdlc_unregister_ok[] __exitdata = | 
 | 	KERN_INFO "N_HDLC: line discipline unregistered\n"; | 
 | static const char hdlc_unregister_fail[] __exitdata = | 
 | 	KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n"; | 
 |  | 
 | static void __exit n_hdlc_exit(void) | 
 | { | 
 | 	/* Release tty registration of line discipline */ | 
 | 	int status = tty_unregister_ldisc(N_HDLC); | 
 |  | 
 | 	if (status) | 
 | 		printk(hdlc_unregister_fail, status); | 
 | 	else | 
 | 		printk(hdlc_unregister_ok); | 
 | } | 
 |  | 
 | module_init(n_hdlc_init); | 
 | module_exit(n_hdlc_exit); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com"); | 
 | module_param(debuglevel, int, 0); | 
 | module_param(maxframe, int, 0); | 
 | MODULE_ALIAS_LDISC(N_HDLC); |