| /* | 
 |  * Copyright (c) 2016, Mellanox Technologies. All rights reserved. | 
 |  * | 
 |  * This software is available to you under a choice of one of two | 
 |  * licenses.  You may choose to be licensed under the terms of the GNU | 
 |  * General Public License (GPL) Version 2, available from the file | 
 |  * COPYING in the main directory of this source tree, or the | 
 |  * OpenIB.org BSD license below: | 
 |  * | 
 |  *     Redistribution and use in source and binary forms, with or | 
 |  *     without modification, are permitted provided that the following | 
 |  *     conditions are met: | 
 |  * | 
 |  *      - Redistributions of source code must retain the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer. | 
 |  * | 
 |  *      - Redistributions in binary form must reproduce the above | 
 |  *        copyright notice, this list of conditions and the following | 
 |  *        disclaimer in the documentation and/or other materials | 
 |  *        provided with the distribution. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
 |  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
 |  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
 |  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | 
 |  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | 
 |  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | 
 |  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | 
 |  * SOFTWARE. | 
 |  */ | 
 |  | 
 | #include <linux/interrupt.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/clockchips.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/cpu.h> | 
 | #include <soc/nps/common.h> | 
 |  | 
 | #define NPS_MSU_TICK_LOW	0xC8 | 
 | #define NPS_CLUSTER_OFFSET	8 | 
 | #define NPS_CLUSTER_NUM		16 | 
 |  | 
 | /* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */ | 
 | static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly; | 
 |  | 
 | static int __init nps_get_timer_clk(struct device_node *node, | 
 | 			     unsigned long *timer_freq, | 
 | 			     struct clk **clk) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	*clk = of_clk_get(node, 0); | 
 | 	ret = PTR_ERR_OR_ZERO(*clk); | 
 | 	if (ret) { | 
 | 		pr_err("timer missing clk\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(*clk); | 
 | 	if (ret) { | 
 | 		pr_err("Couldn't enable parent clk\n"); | 
 | 		clk_put(*clk); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	*timer_freq = clk_get_rate(*clk); | 
 | 	if (!(*timer_freq)) { | 
 | 		pr_err("Couldn't get clk rate\n"); | 
 | 		clk_disable_unprepare(*clk); | 
 | 		clk_put(*clk); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u64 nps_clksrc_read(struct clocksource *clksrc) | 
 | { | 
 | 	int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET; | 
 |  | 
 | 	return (u64)ioread32be(nps_msu_reg_low_addr[cluster]); | 
 | } | 
 |  | 
 | static int __init nps_setup_clocksource(struct device_node *node) | 
 | { | 
 | 	int ret, cluster; | 
 | 	struct clk *clk; | 
 | 	unsigned long nps_timer1_freq; | 
 |  | 
 |  | 
 | 	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++) | 
 | 		nps_msu_reg_low_addr[cluster] = | 
 | 			nps_host_reg((cluster << NPS_CLUSTER_OFFSET), | 
 | 				     NPS_MSU_BLKID, NPS_MSU_TICK_LOW); | 
 |  | 
 | 	ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick", | 
 | 				    nps_timer1_freq, 300, 32, nps_clksrc_read); | 
 | 	if (ret) { | 
 | 		pr_err("Couldn't register clock source.\n"); | 
 | 		clk_disable_unprepare(clk); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer", | 
 | 		       nps_setup_clocksource); | 
 | TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1", | 
 | 		       nps_setup_clocksource); | 
 |  | 
 | #ifdef CONFIG_EZNPS_MTM_EXT | 
 | #include <soc/nps/mtm.h> | 
 |  | 
 | /* Timer related Aux registers */ | 
 | #define NPS_REG_TIMER0_TSI	0xFFFFF850 | 
 | #define NPS_REG_TIMER0_LIMIT	0x23 | 
 | #define NPS_REG_TIMER0_CTRL	0x22 | 
 | #define NPS_REG_TIMER0_CNT	0x21 | 
 |  | 
 | /* | 
 |  * Interrupt Enabled (IE) - re-arm the timer | 
 |  * Not Halted (NH) - is cleared when working with JTAG (for debug) | 
 |  */ | 
 | #define TIMER0_CTRL_IE		BIT(0) | 
 | #define TIMER0_CTRL_NH		BIT(1) | 
 |  | 
 | static unsigned long nps_timer0_freq; | 
 | static unsigned long nps_timer0_irq; | 
 |  | 
 | static void nps_clkevent_rm_thread(void) | 
 | { | 
 | 	int thread; | 
 | 	unsigned int cflags, enabled_threads; | 
 |  | 
 | 	hw_schd_save(&cflags); | 
 |  | 
 | 	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); | 
 |  | 
 | 	/* remove thread from TSI1 */ | 
 | 	thread = read_aux_reg(CTOP_AUX_THREAD_ID); | 
 | 	enabled_threads &= ~(1 << thread); | 
 | 	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); | 
 |  | 
 | 	/* Acknowledge and if needed re-arm the timer */ | 
 | 	if (!enabled_threads) | 
 | 		write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH); | 
 | 	else | 
 | 		write_aux_reg(NPS_REG_TIMER0_CTRL, | 
 | 			      TIMER0_CTRL_IE | TIMER0_CTRL_NH); | 
 |  | 
 | 	hw_schd_restore(cflags); | 
 | } | 
 |  | 
 | static void nps_clkevent_add_thread(unsigned long delta) | 
 | { | 
 | 	int thread; | 
 | 	unsigned int cflags, enabled_threads; | 
 |  | 
 | 	hw_schd_save(&cflags); | 
 |  | 
 | 	/* add thread to TSI1 */ | 
 | 	thread = read_aux_reg(CTOP_AUX_THREAD_ID); | 
 | 	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); | 
 | 	enabled_threads |= (1 << thread); | 
 | 	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); | 
 |  | 
 | 	/* set next timer event */ | 
 | 	write_aux_reg(NPS_REG_TIMER0_LIMIT, delta); | 
 | 	write_aux_reg(NPS_REG_TIMER0_CNT, 0); | 
 | 	write_aux_reg(NPS_REG_TIMER0_CTRL, | 
 | 		      TIMER0_CTRL_IE | TIMER0_CTRL_NH); | 
 |  | 
 | 	hw_schd_restore(cflags); | 
 | } | 
 |  | 
 | /* | 
 |  * Whenever anyone tries to change modes, we just mask interrupts | 
 |  * and wait for the next event to get set. | 
 |  */ | 
 | static int nps_clkevent_set_state(struct clock_event_device *dev) | 
 | { | 
 | 	nps_clkevent_rm_thread(); | 
 | 	disable_percpu_irq(nps_timer0_irq); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nps_clkevent_set_next_event(unsigned long delta, | 
 | 				       struct clock_event_device *dev) | 
 | { | 
 | 	nps_clkevent_add_thread(delta); | 
 | 	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = { | 
 | 	.name				=	"NPS Timer0", | 
 | 	.features			=	CLOCK_EVT_FEAT_ONESHOT, | 
 | 	.rating				=	300, | 
 | 	.set_next_event			=	nps_clkevent_set_next_event, | 
 | 	.set_state_oneshot		=	nps_clkevent_set_state, | 
 | 	.set_state_oneshot_stopped	=	nps_clkevent_set_state, | 
 | 	.set_state_shutdown		=	nps_clkevent_set_state, | 
 | 	.tick_resume			=	nps_clkevent_set_state, | 
 | }; | 
 |  | 
 | static irqreturn_t timer_irq_handler(int irq, void *dev_id) | 
 | { | 
 | 	struct clock_event_device *evt = dev_id; | 
 |  | 
 | 	nps_clkevent_rm_thread(); | 
 | 	evt->event_handler(evt); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int nps_timer_starting_cpu(unsigned int cpu) | 
 | { | 
 | 	struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device); | 
 |  | 
 | 	evt->cpumask = cpumask_of(smp_processor_id()); | 
 |  | 
 | 	clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX); | 
 | 	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nps_timer_dying_cpu(unsigned int cpu) | 
 | { | 
 | 	disable_percpu_irq(nps_timer0_irq); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init nps_setup_clockevent(struct device_node *node) | 
 | { | 
 | 	struct clk *clk; | 
 | 	int ret; | 
 |  | 
 | 	nps_timer0_irq = irq_of_parse_and_map(node, 0); | 
 | 	if (nps_timer0_irq <= 0) { | 
 | 		pr_err("clockevent: missing irq\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Needs apriori irq_set_percpu_devid() done in intc map function */ | 
 | 	ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler, | 
 | 				 "Timer0 (per-cpu-tick)", | 
 | 				 &nps_clockevent_device); | 
 | 	if (ret) { | 
 | 		pr_err("Couldn't request irq\n"); | 
 | 		clk_disable_unprepare(clk); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING, | 
 | 				"clockevents/nps:starting", | 
 | 				nps_timer_starting_cpu, | 
 | 				nps_timer_dying_cpu); | 
 | 	if (ret) { | 
 | 		pr_err("Failed to setup hotplug state\n"); | 
 | 		clk_disable_unprepare(clk); | 
 | 		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0", | 
 | 		       nps_setup_clockevent); | 
 | #endif /* CONFIG_EZNPS_MTM_EXT */ |