| /* | 
 |  *  Copyright Intel Corporation (C) 2017. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along with | 
 |  * this program.  If not, see <http://www.gnu.org/licenses/>. | 
 |  * | 
 |  * Based on the i2c-axxia.c driver. | 
 |  */ | 
 | #include <linux/clk.h> | 
 | #include <linux/clkdev.h> | 
 | #include <linux/err.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/iopoll.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #define ALTR_I2C_TFR_CMD	0x00	/* Transfer Command register */ | 
 | #define     ALTR_I2C_TFR_CMD_STA	BIT(9)	/* send START before byte */ | 
 | #define     ALTR_I2C_TFR_CMD_STO	BIT(8)	/* send STOP after byte */ | 
 | #define     ALTR_I2C_TFR_CMD_RW_D	BIT(0)	/* Direction of transfer */ | 
 | #define ALTR_I2C_RX_DATA	0x04	/* RX data FIFO register */ | 
 | #define ALTR_I2C_CTRL		0x08	/* Control register */ | 
 | #define     ALTR_I2C_CTRL_RXT_SHFT	4	/* RX FIFO Threshold */ | 
 | #define     ALTR_I2C_CTRL_TCT_SHFT	2	/* TFER CMD FIFO Threshold */ | 
 | #define     ALTR_I2C_CTRL_BSPEED	BIT(1)	/* Bus Speed (1=Fast) */ | 
 | #define     ALTR_I2C_CTRL_EN	BIT(0)	/* Enable Core (1=Enable) */ | 
 | #define ALTR_I2C_ISER		0x0C	/* Interrupt Status Enable register */ | 
 | #define     ALTR_I2C_ISER_RXOF_EN	BIT(4)	/* Enable RX OVERFLOW IRQ */ | 
 | #define     ALTR_I2C_ISER_ARB_EN	BIT(3)	/* Enable ARB LOST IRQ */ | 
 | #define     ALTR_I2C_ISER_NACK_EN	BIT(2)	/* Enable NACK DET IRQ */ | 
 | #define     ALTR_I2C_ISER_RXRDY_EN	BIT(1)	/* Enable RX Ready IRQ */ | 
 | #define     ALTR_I2C_ISER_TXRDY_EN	BIT(0)	/* Enable TX Ready IRQ */ | 
 | #define ALTR_I2C_ISR		0x10	/* Interrupt Status register */ | 
 | #define     ALTR_I2C_ISR_RXOF		BIT(4)	/* RX OVERFLOW IRQ */ | 
 | #define     ALTR_I2C_ISR_ARB		BIT(3)	/* ARB LOST IRQ */ | 
 | #define     ALTR_I2C_ISR_NACK		BIT(2)	/* NACK DET IRQ */ | 
 | #define     ALTR_I2C_ISR_RXRDY		BIT(1)	/* RX Ready IRQ */ | 
 | #define     ALTR_I2C_ISR_TXRDY		BIT(0)	/* TX Ready IRQ */ | 
 | #define ALTR_I2C_STATUS		0x14	/* Status register */ | 
 | #define     ALTR_I2C_STAT_CORE		BIT(0)	/* Core Status (0=idle) */ | 
 | #define ALTR_I2C_TC_FIFO_LVL	0x18	/* Transfer FIFO LVL register */ | 
 | #define ALTR_I2C_RX_FIFO_LVL	0x1C	/* Receive FIFO LVL register */ | 
 | #define ALTR_I2C_SCL_LOW	0x20	/* SCL low count register */ | 
 | #define ALTR_I2C_SCL_HIGH	0x24	/* SCL high count register */ | 
 | #define ALTR_I2C_SDA_HOLD	0x28	/* SDA hold count register */ | 
 |  | 
 | #define ALTR_I2C_ALL_IRQ	(ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \ | 
 | 				 ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \ | 
 | 				 ALTR_I2C_ISR_TXRDY) | 
 |  | 
 | #define ALTR_I2C_THRESHOLD	0	/* IRQ Threshold at 1 element */ | 
 | #define ALTR_I2C_DFLT_FIFO_SZ	4 | 
 | #define ALTR_I2C_TIMEOUT	100000	/* 100ms */ | 
 | #define ALTR_I2C_XFER_TIMEOUT	(msecs_to_jiffies(250)) | 
 |  | 
 | /** | 
 |  * altr_i2c_dev - I2C device context | 
 |  * @base: pointer to register struct | 
 |  * @msg: pointer to current message | 
 |  * @msg_len: number of bytes transferred in msg | 
 |  * @msg_err: error code for completed message | 
 |  * @msg_complete: xfer completion object | 
 |  * @dev: device reference | 
 |  * @adapter: core i2c abstraction | 
 |  * @i2c_clk: clock reference for i2c input clock | 
 |  * @bus_clk_rate: current i2c bus clock rate | 
 |  * @buf: ptr to msg buffer for easier use. | 
 |  * @fifo_size: size of the FIFO passed in. | 
 |  * @isr_mask: cached copy of local ISR enables. | 
 |  * @isr_status: cached copy of local ISR status. | 
 |  * @lock: spinlock for IRQ synchronization. | 
 |  */ | 
 | struct altr_i2c_dev { | 
 | 	void __iomem *base; | 
 | 	struct i2c_msg *msg; | 
 | 	size_t msg_len; | 
 | 	int msg_err; | 
 | 	struct completion msg_complete; | 
 | 	struct device *dev; | 
 | 	struct i2c_adapter adapter; | 
 | 	struct clk *i2c_clk; | 
 | 	u32 bus_clk_rate; | 
 | 	u8 *buf; | 
 | 	u32 fifo_size; | 
 | 	u32 isr_mask; | 
 | 	u32 isr_status; | 
 | 	spinlock_t lock;	/* IRQ synchronization */ | 
 | }; | 
 |  | 
 | static void | 
 | altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 int_en; | 
 |  | 
 | 	spin_lock_irqsave(&idev->lock, flags); | 
 |  | 
 | 	int_en = readl(idev->base + ALTR_I2C_ISER); | 
 | 	if (enable) | 
 | 		idev->isr_mask = int_en | mask; | 
 | 	else | 
 | 		idev->isr_mask = int_en & ~mask; | 
 |  | 
 | 	writel(idev->isr_mask, idev->base + ALTR_I2C_ISER); | 
 |  | 
 | 	spin_unlock_irqrestore(&idev->lock, flags); | 
 | } | 
 |  | 
 | static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask) | 
 | { | 
 | 	u32 int_en = readl(idev->base + ALTR_I2C_ISR); | 
 |  | 
 | 	writel(int_en | mask, idev->base + ALTR_I2C_ISR); | 
 | } | 
 |  | 
 | static void altr_i2c_core_disable(struct altr_i2c_dev *idev) | 
 | { | 
 | 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL); | 
 |  | 
 | 	writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL); | 
 | } | 
 |  | 
 | static void altr_i2c_core_enable(struct altr_i2c_dev *idev) | 
 | { | 
 | 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL); | 
 |  | 
 | 	writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL); | 
 | } | 
 |  | 
 | static void altr_i2c_reset(struct altr_i2c_dev *idev) | 
 | { | 
 | 	altr_i2c_core_disable(idev); | 
 | 	altr_i2c_core_enable(idev); | 
 | } | 
 |  | 
 | static inline void altr_i2c_stop(struct altr_i2c_dev *idev) | 
 | { | 
 | 	writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD); | 
 | } | 
 |  | 
 | static void altr_i2c_init(struct altr_i2c_dev *idev) | 
 | { | 
 | 	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate; | 
 | 	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000; | 
 | 	u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) | | 
 | 		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT); | 
 | 	u32 t_high, t_low; | 
 |  | 
 | 	if (idev->bus_clk_rate <= 100000) { | 
 | 		tmp &= ~ALTR_I2C_CTRL_BSPEED; | 
 | 		/* Standard mode SCL 50/50 */ | 
 | 		t_high = divisor * 1 / 2; | 
 | 		t_low = divisor * 1 / 2; | 
 | 	} else { | 
 | 		tmp |= ALTR_I2C_CTRL_BSPEED; | 
 | 		/* Fast mode SCL 33/66 */ | 
 | 		t_high = divisor * 1 / 3; | 
 | 		t_low = divisor * 2 / 3; | 
 | 	} | 
 | 	writel(tmp, idev->base + ALTR_I2C_CTRL); | 
 |  | 
 | 	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n", | 
 | 		idev->bus_clk_rate, clk_mhz, divisor); | 
 |  | 
 | 	/* Reset controller */ | 
 | 	altr_i2c_reset(idev); | 
 |  | 
 | 	/* SCL High Time */ | 
 | 	writel(t_high, idev->base + ALTR_I2C_SCL_HIGH); | 
 | 	/* SCL Low Time */ | 
 | 	writel(t_low, idev->base + ALTR_I2C_SCL_LOW); | 
 | 	/* SDA Hold Time, 300ns */ | 
 | 	writel(div_u64(300 * clk_mhz, 1000), idev->base + ALTR_I2C_SDA_HOLD); | 
 |  | 
 | 	/* Mask all master interrupt bits */ | 
 | 	altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false); | 
 | } | 
 |  | 
 | /** | 
 |  * altr_i2c_transfer - On the last byte to be transmitted, send | 
 |  * a Stop bit on the last byte. | 
 |  */ | 
 | static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data) | 
 | { | 
 | 	/* On the last byte to be transmitted, send STOP */ | 
 | 	if (idev->msg_len == 1) | 
 | 		data |= ALTR_I2C_TFR_CMD_STO; | 
 | 	if (idev->msg_len > 0) | 
 | 		writel(data, idev->base + ALTR_I2C_TFR_CMD); | 
 | } | 
 |  | 
 | /** | 
 |  * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of | 
 |  * transfer. Send a Stop bit on the last byte. | 
 |  */ | 
 | static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev) | 
 | { | 
 | 	size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL); | 
 | 	int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len); | 
 |  | 
 | 	while (bytes_to_transfer-- > 0) { | 
 | 		*idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA); | 
 | 		idev->msg_len--; | 
 | 		altr_i2c_transfer(idev, 0); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer. | 
 |  * @return: Number of bytes left to transfer. | 
 |  */ | 
 | static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev) | 
 | { | 
 | 	size_t tx_fifo_avail = idev->fifo_size - readl(idev->base + | 
 | 						       ALTR_I2C_TC_FIFO_LVL); | 
 | 	int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len); | 
 | 	int ret = idev->msg_len - bytes_to_transfer; | 
 |  | 
 | 	while (bytes_to_transfer-- > 0) { | 
 | 		altr_i2c_transfer(idev, *idev->buf++); | 
 | 		idev->msg_len--; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static irqreturn_t altr_i2c_isr_quick(int irq, void *_dev) | 
 | { | 
 | 	struct altr_i2c_dev *idev = _dev; | 
 | 	irqreturn_t ret = IRQ_HANDLED; | 
 |  | 
 | 	/* Read IRQ status but only interested in Enabled IRQs. */ | 
 | 	idev->isr_status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask; | 
 | 	if (idev->isr_status) | 
 | 		ret = IRQ_WAKE_THREAD; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static irqreturn_t altr_i2c_isr(int irq, void *_dev) | 
 | { | 
 | 	int ret; | 
 | 	bool read, finish = false; | 
 | 	struct altr_i2c_dev *idev = _dev; | 
 | 	u32 status = idev->isr_status; | 
 |  | 
 | 	if (!idev->msg) { | 
 | 		dev_warn(idev->dev, "unexpected interrupt\n"); | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); | 
 | 		return IRQ_HANDLED; | 
 | 	} | 
 | 	read = (idev->msg->flags & I2C_M_RD) != 0; | 
 |  | 
 | 	/* handle Lost Arbitration */ | 
 | 	if (unlikely(status & ALTR_I2C_ISR_ARB)) { | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_ARB); | 
 | 		idev->msg_err = -EAGAIN; | 
 | 		finish = true; | 
 | 	} else if (unlikely(status & ALTR_I2C_ISR_NACK)) { | 
 | 		dev_dbg(idev->dev, "Could not get ACK\n"); | 
 | 		idev->msg_err = -ENXIO; | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_NACK); | 
 | 		altr_i2c_stop(idev); | 
 | 		finish = true; | 
 | 	} else if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) { | 
 | 		/* handle RX FIFO Overflow */ | 
 | 		altr_i2c_empty_rx_fifo(idev); | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY); | 
 | 		altr_i2c_stop(idev); | 
 | 		dev_err(idev->dev, "RX FIFO Overflow\n"); | 
 | 		finish = true; | 
 | 	} else if (read && (status & ALTR_I2C_ISR_RXRDY)) { | 
 | 		/* RX FIFO needs service? */ | 
 | 		altr_i2c_empty_rx_fifo(idev); | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY); | 
 | 		if (!idev->msg_len) | 
 | 			finish = true; | 
 | 	} else if (!read && (status & ALTR_I2C_ISR_TXRDY)) { | 
 | 		/* TX FIFO needs service? */ | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY); | 
 | 		if (idev->msg_len > 0) | 
 | 			altr_i2c_fill_tx_fifo(idev); | 
 | 		else | 
 | 			finish = true; | 
 | 	} else { | 
 | 		dev_warn(idev->dev, "Unexpected interrupt: 0x%x\n", status); | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); | 
 | 	} | 
 |  | 
 | 	if (finish) { | 
 | 		/* Wait for the Core to finish */ | 
 | 		ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS, | 
 | 						status, | 
 | 						!(status & ALTR_I2C_STAT_CORE), | 
 | 						1, ALTR_I2C_TIMEOUT); | 
 | 		if (ret) | 
 | 			dev_err(idev->dev, "message timeout\n"); | 
 | 		altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false); | 
 | 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); | 
 | 		complete(&idev->msg_complete); | 
 | 		dev_dbg(idev->dev, "Message Complete\n"); | 
 | 	} | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) | 
 | { | 
 | 	u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK; | 
 | 	unsigned long time_left; | 
 | 	u32 value; | 
 | 	u8 addr = i2c_8bit_addr_from_msg(msg); | 
 |  | 
 | 	idev->msg = msg; | 
 | 	idev->msg_len = msg->len; | 
 | 	idev->buf = msg->buf; | 
 | 	idev->msg_err = 0; | 
 | 	reinit_completion(&idev->msg_complete); | 
 | 	altr_i2c_core_enable(idev); | 
 |  | 
 | 	/* Make sure RX FIFO is empty */ | 
 | 	do { | 
 | 		readl(idev->base + ALTR_I2C_RX_DATA); | 
 | 	} while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL)); | 
 |  | 
 | 	writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD); | 
 |  | 
 | 	if ((msg->flags & I2C_M_RD) != 0) { | 
 | 		imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN; | 
 | 		altr_i2c_int_enable(idev, imask, true); | 
 | 		/* write the first byte to start the RX */ | 
 | 		altr_i2c_transfer(idev, 0); | 
 | 	} else { | 
 | 		imask |= ALTR_I2C_ISR_TXRDY; | 
 | 		altr_i2c_int_enable(idev, imask, true); | 
 | 		altr_i2c_fill_tx_fifo(idev); | 
 | 	} | 
 |  | 
 | 	time_left = wait_for_completion_timeout(&idev->msg_complete, | 
 | 						ALTR_I2C_XFER_TIMEOUT); | 
 | 	altr_i2c_int_enable(idev, imask, false); | 
 |  | 
 | 	value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE; | 
 | 	if (value) | 
 | 		dev_err(idev->dev, "Core Status not IDLE...\n"); | 
 |  | 
 | 	if (time_left == 0) { | 
 | 		idev->msg_err = -ETIMEDOUT; | 
 | 		dev_dbg(idev->dev, "Transaction timed out.\n"); | 
 | 	} | 
 |  | 
 | 	altr_i2c_core_disable(idev); | 
 |  | 
 | 	return idev->msg_err; | 
 | } | 
 |  | 
 | static int | 
 | altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) | 
 | { | 
 | 	struct altr_i2c_dev *idev = i2c_get_adapdata(adap); | 
 | 	int i, ret; | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 | 		ret = altr_i2c_xfer_msg(idev, msgs++); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 | 	return num; | 
 | } | 
 |  | 
 | static u32 altr_i2c_func(struct i2c_adapter *adap) | 
 | { | 
 | 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | 
 | } | 
 |  | 
 | static const struct i2c_algorithm altr_i2c_algo = { | 
 | 	.master_xfer = altr_i2c_xfer, | 
 | 	.functionality = altr_i2c_func, | 
 | }; | 
 |  | 
 | static int altr_i2c_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct altr_i2c_dev *idev = NULL; | 
 | 	struct resource *res; | 
 | 	int irq, ret; | 
 | 	u32 val; | 
 |  | 
 | 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); | 
 | 	if (!idev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	idev->base = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(idev->base)) | 
 | 		return PTR_ERR(idev->base); | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) { | 
 | 		dev_err(&pdev->dev, "missing interrupt resource\n"); | 
 | 		return irq; | 
 | 	} | 
 |  | 
 | 	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL); | 
 | 	if (IS_ERR(idev->i2c_clk)) { | 
 | 		dev_err(&pdev->dev, "missing clock\n"); | 
 | 		return PTR_ERR(idev->i2c_clk); | 
 | 	} | 
 |  | 
 | 	idev->dev = &pdev->dev; | 
 | 	init_completion(&idev->msg_complete); | 
 | 	spin_lock_init(&idev->lock); | 
 |  | 
 | 	val = device_property_read_u32(idev->dev, "fifo-size", | 
 | 				       &idev->fifo_size); | 
 | 	if (val) { | 
 | 		dev_err(&pdev->dev, "FIFO size set to default of %d\n", | 
 | 			ALTR_I2C_DFLT_FIFO_SZ); | 
 | 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ; | 
 | 	} | 
 |  | 
 | 	val = device_property_read_u32(idev->dev, "clock-frequency", | 
 | 				       &idev->bus_clk_rate); | 
 | 	if (val) { | 
 | 		dev_err(&pdev->dev, "Default to 100kHz\n"); | 
 | 		idev->bus_clk_rate = 100000;	/* default clock rate */ | 
 | 	} | 
 |  | 
 | 	if (idev->bus_clk_rate > 400000) { | 
 | 		dev_err(&pdev->dev, "invalid clock-frequency %d\n", | 
 | 			idev->bus_clk_rate); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ret = devm_request_threaded_irq(&pdev->dev, irq, altr_i2c_isr_quick, | 
 | 					altr_i2c_isr, IRQF_ONESHOT, | 
 | 					pdev->name, idev); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(idev->i2c_clk); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed to enable clock\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	altr_i2c_init(idev); | 
 |  | 
 | 	i2c_set_adapdata(&idev->adapter, idev); | 
 | 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name)); | 
 | 	idev->adapter.owner = THIS_MODULE; | 
 | 	idev->adapter.algo = &altr_i2c_algo; | 
 | 	idev->adapter.dev.parent = &pdev->dev; | 
 | 	idev->adapter.dev.of_node = pdev->dev.of_node; | 
 |  | 
 | 	platform_set_drvdata(pdev, idev); | 
 |  | 
 | 	ret = i2c_add_adapter(&idev->adapter); | 
 | 	if (ret) { | 
 | 		clk_disable_unprepare(idev->i2c_clk); | 
 | 		return ret; | 
 | 	} | 
 | 	dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int altr_i2c_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct altr_i2c_dev *idev = platform_get_drvdata(pdev); | 
 |  | 
 | 	clk_disable_unprepare(idev->i2c_clk); | 
 | 	i2c_del_adapter(&idev->adapter); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Match table for of_platform binding */ | 
 | static const struct of_device_id altr_i2c_of_match[] = { | 
 | 	{ .compatible = "altr,softip-i2c-v1.0" }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, altr_i2c_of_match); | 
 |  | 
 | static struct platform_driver altr_i2c_driver = { | 
 | 	.probe = altr_i2c_probe, | 
 | 	.remove = altr_i2c_remove, | 
 | 	.driver = { | 
 | 		.name = "altera-i2c", | 
 | 		.of_match_table = altr_i2c_of_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(altr_i2c_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Altera Soft IP I2C bus driver"); | 
 | MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>"); | 
 | MODULE_LICENSE("GPL v2"); |