| /* | 
 |  * Linux ARCnet driver - "cap mode" packet encapsulation. | 
 |  * It adds sequence numbers to packets for communicating between a user space | 
 |  * application and the driver. After a transmit it sends a packet with protocol | 
 |  * byte 0 back up to the userspace containing the sequence number of the packet | 
 |  * plus the transmit-status on the ArcNet. | 
 |  * | 
 |  * Written 2002-4 by Esben Nielsen, Vestas Wind Systems A/S | 
 |  * Derived from arc-rawmode.c by Avery Pennarun. | 
 |  * arc-rawmode was in turned based on skeleton.c, see below. | 
 |  * | 
 |  * ********************** | 
 |  * | 
 |  * The original copyright of skeleton.c was as follows: | 
 |  * | 
 |  * skeleton.c Written 1993 by Donald Becker. | 
 |  * Copyright 1993 United States Government as represented by the | 
 |  * Director, National Security Agency.  This software may only be used | 
 |  * and distributed according to the terms of the GNU General Public License as | 
 |  * modified by SRC, incorporated herein by reference. | 
 |  * | 
 |  * ********************** | 
 |  * | 
 |  * For more details, see drivers/net/arcnet.c | 
 |  * | 
 |  * ********************** | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/gfp.h> | 
 | #include <linux/init.h> | 
 | #include <linux/if_arp.h> | 
 | #include <net/arp.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/skbuff.h> | 
 |  | 
 | #include "arcdevice.h" | 
 |  | 
 | /* packet receiver */ | 
 | static void rx(struct net_device *dev, int bufnum, | 
 | 	       struct archdr *pkthdr, int length) | 
 | { | 
 | 	struct arcnet_local *lp = netdev_priv(dev); | 
 | 	struct sk_buff *skb; | 
 | 	struct archdr *pkt = pkthdr; | 
 | 	char *pktbuf, *pkthdrbuf; | 
 | 	int ofs; | 
 |  | 
 | 	arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n", | 
 | 		   length); | 
 |  | 
 | 	if (length >= MinTU) | 
 | 		ofs = 512 - length; | 
 | 	else | 
 | 		ofs = 256 - length; | 
 |  | 
 | 	skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		dev->stats.rx_dropped++; | 
 | 		return; | 
 | 	} | 
 | 	skb_put(skb, length + ARC_HDR_SIZE + sizeof(int)); | 
 | 	skb->dev = dev; | 
 | 	skb_reset_mac_header(skb); | 
 | 	pkt = (struct archdr *)skb_mac_header(skb); | 
 | 	skb_pull(skb, ARC_HDR_SIZE); | 
 |  | 
 | 	/* up to sizeof(pkt->soft) has already been copied from the card | 
 | 	 * squeeze in an int for the cap encapsulation | 
 | 	 * use these variables to be sure we count in bytes, not in | 
 | 	 * sizeof(struct archdr) | 
 | 	 */ | 
 | 	pktbuf = (char *)pkt; | 
 | 	pkthdrbuf = (char *)pkthdr; | 
 | 	memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto)); | 
 | 	memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int), | 
 | 	       pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto), | 
 | 	       sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto)); | 
 |  | 
 | 	if (length > sizeof(pkt->soft)) | 
 | 		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), | 
 | 				      pkt->soft.raw + sizeof(pkt->soft) | 
 | 				      + sizeof(int), | 
 | 				      length - sizeof(pkt->soft)); | 
 |  | 
 | 	if (BUGLVL(D_SKB)) | 
 | 		arcnet_dump_skb(dev, skb, "rx"); | 
 |  | 
 | 	skb->protocol = cpu_to_be16(ETH_P_ARCNET); | 
 | 	netif_rx(skb); | 
 | } | 
 |  | 
 | /* Create the ARCnet hard/soft headers for cap mode. | 
 |  * There aren't any soft headers in cap mode - not even the protocol id. | 
 |  */ | 
 | static int build_header(struct sk_buff *skb, | 
 | 			struct net_device *dev, | 
 | 			unsigned short type, | 
 | 			uint8_t daddr) | 
 | { | 
 | 	int hdr_size = ARC_HDR_SIZE; | 
 | 	struct archdr *pkt = skb_push(skb, hdr_size); | 
 |  | 
 | 	arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n", | 
 | 		   *((int *)&pkt->soft.cap.cookie[0])); | 
 |  | 
 | 	/* Set the source hardware address. | 
 | 	 * | 
 | 	 * This is pretty pointless for most purposes, but it can help in | 
 | 	 * debugging.  ARCnet does not allow us to change the source address in | 
 | 	 * the actual packet sent) | 
 | 	 */ | 
 | 	pkt->hard.source = *dev->dev_addr; | 
 |  | 
 | 	/* see linux/net/ethernet/eth.c to see where I got the following */ | 
 |  | 
 | 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { | 
 | 		/* FIXME: fill in the last byte of the dest ipaddr here to | 
 | 		 * better comply with RFC1051 in "noarp" mode. | 
 | 		 */ | 
 | 		pkt->hard.dest = 0; | 
 | 		return hdr_size; | 
 | 	} | 
 | 	/* otherwise, just fill it in and go! */ | 
 | 	pkt->hard.dest = daddr; | 
 |  | 
 | 	return hdr_size;	/* success */ | 
 | } | 
 |  | 
 | static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, | 
 | 		      int bufnum) | 
 | { | 
 | 	struct arcnet_local *lp = netdev_priv(dev); | 
 | 	struct arc_hardware *hard = &pkt->hard; | 
 | 	int ofs; | 
 |  | 
 | 	/* hard header is not included in packet length */ | 
 | 	length -= ARC_HDR_SIZE; | 
 | 	/* And neither is the cookie field */ | 
 | 	length -= sizeof(int); | 
 |  | 
 | 	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", | 
 | 		   lp->next_tx, lp->cur_tx, bufnum); | 
 |  | 
 | 	arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n", | 
 | 		   *((int *)&pkt->soft.cap.cookie[0])); | 
 |  | 
 | 	if (length > XMTU) { | 
 | 		/* should never happen! other people already check for this. */ | 
 | 		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n", | 
 | 			   length, XMTU); | 
 | 		length = XMTU; | 
 | 	} | 
 | 	if (length > MinTU) { | 
 | 		hard->offset[0] = 0; | 
 | 		hard->offset[1] = ofs = 512 - length; | 
 | 	} else if (length > MTU) { | 
 | 		hard->offset[0] = 0; | 
 | 		hard->offset[1] = ofs = 512 - length - 3; | 
 | 	} else { | 
 | 		hard->offset[0] = ofs = 256 - length; | 
 | 	} | 
 |  | 
 | 	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", | 
 | 		   length, ofs); | 
 |  | 
 | 	/* Copy the arcnet-header + the protocol byte down: */ | 
 | 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); | 
 | 	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft.cap.proto, | 
 | 			    sizeof(pkt->soft.cap.proto)); | 
 |  | 
 | 	/* Skip the extra integer we have written into it as a cookie | 
 | 	 * but write the rest of the message: | 
 | 	 */ | 
 | 	lp->hw.copy_to_card(dev, bufnum, ofs + 1, | 
 | 			    ((unsigned char *)&pkt->soft.cap.mes), length - 1); | 
 |  | 
 | 	lp->lastload_dest = hard->dest; | 
 |  | 
 | 	return 1;	/* done */ | 
 | } | 
 |  | 
 | static int ack_tx(struct net_device *dev, int acked) | 
 | { | 
 | 	struct arcnet_local *lp = netdev_priv(dev); | 
 | 	struct sk_buff *ackskb; | 
 | 	struct archdr *ackpkt; | 
 | 	int length = sizeof(struct arc_cap); | 
 |  | 
 | 	arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n", | 
 | 		   lp->outgoing.skb->protocol, acked); | 
 |  | 
 | 	if (BUGLVL(D_SKB)) | 
 | 		arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); | 
 |  | 
 | 	/* Now alloc a skb to send back up through the layers: */ | 
 | 	ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); | 
 | 	if (!ackskb) | 
 | 		goto free_outskb; | 
 |  | 
 | 	skb_put(ackskb, length + ARC_HDR_SIZE); | 
 | 	ackskb->dev = dev; | 
 |  | 
 | 	skb_reset_mac_header(ackskb); | 
 | 	ackpkt = (struct archdr *)skb_mac_header(ackskb); | 
 | 	/* skb_pull(ackskb, ARC_HDR_SIZE); */ | 
 |  | 
 | 	skb_copy_from_linear_data(lp->outgoing.skb, ackpkt, | 
 | 				  ARC_HDR_SIZE + sizeof(struct arc_cap)); | 
 | 	ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ | 
 | 	ackpkt->soft.cap.mes.ack = acked; | 
 |  | 
 | 	arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n", | 
 | 		   *((int *)&ackpkt->soft.cap.cookie[0])); | 
 |  | 
 | 	ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); | 
 |  | 
 | 	if (BUGLVL(D_SKB)) | 
 | 		arcnet_dump_skb(dev, ackskb, "ack_tx_recv"); | 
 | 	netif_rx(ackskb); | 
 |  | 
 | free_outskb: | 
 | 	dev_kfree_skb_irq(lp->outgoing.skb); | 
 | 	lp->outgoing.proto = NULL; | 
 | 			/* We are always finished when in this protocol */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct ArcProto capmode_proto = { | 
 | 	.suffix		= 'r', | 
 | 	.mtu		= XMTU, | 
 | 	.rx		= rx, | 
 | 	.build_header	= build_header, | 
 | 	.prepare_tx	= prepare_tx, | 
 | 	.ack_tx		= ack_tx | 
 | }; | 
 |  | 
 | static int __init capmode_module_init(void) | 
 | { | 
 | 	int count; | 
 |  | 
 | 	pr_info("cap mode (`c') encapsulation support loaded\n"); | 
 |  | 
 | 	for (count = 1; count <= 8; count++) | 
 | 		if (arc_proto_map[count] == arc_proto_default) | 
 | 			arc_proto_map[count] = &capmode_proto; | 
 |  | 
 | 	/* for cap mode, we only set the bcast proto if there's no better one */ | 
 | 	if (arc_bcast_proto == arc_proto_default) | 
 | 		arc_bcast_proto = &capmode_proto; | 
 |  | 
 | 	arc_proto_default = &capmode_proto; | 
 | 	arc_raw_proto = &capmode_proto; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit capmode_module_exit(void) | 
 | { | 
 | 	arcnet_unregister_proto(&capmode_proto); | 
 | } | 
 | module_init(capmode_module_init); | 
 | module_exit(capmode_module_exit); | 
 |  | 
 | MODULE_LICENSE("GPL"); |