| /* | 
 |  * IIO driver for the light sensor ISL29028. | 
 |  * ISL29028 is Concurrent Ambient Light and Proximity Sensor | 
 |  * | 
 |  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved. | 
 |  * Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
 |  * | 
 |  * Datasheets: | 
 |  *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29028.pdf | 
 |  *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29030.pdf | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/iio/iio.h> | 
 | #include <linux/iio/sysfs.h> | 
 | #include <linux/pm_runtime.h> | 
 |  | 
 | #define ISL29028_CONV_TIME_MS			100 | 
 |  | 
 | #define ISL29028_REG_CONFIGURE			0x01 | 
 |  | 
 | #define ISL29028_CONF_ALS_IR_MODE_ALS		0 | 
 | #define ISL29028_CONF_ALS_IR_MODE_IR		BIT(0) | 
 | #define ISL29028_CONF_ALS_IR_MODE_MASK		BIT(0) | 
 |  | 
 | #define ISL29028_CONF_ALS_RANGE_LOW_LUX		0 | 
 | #define ISL29028_CONF_ALS_RANGE_HIGH_LUX	BIT(1) | 
 | #define ISL29028_CONF_ALS_RANGE_MASK		BIT(1) | 
 |  | 
 | #define ISL29028_CONF_ALS_DIS			0 | 
 | #define ISL29028_CONF_ALS_EN			BIT(2) | 
 | #define ISL29028_CONF_ALS_EN_MASK		BIT(2) | 
 |  | 
 | #define ISL29028_CONF_PROX_SLP_SH		4 | 
 | #define ISL29028_CONF_PROX_SLP_MASK		(7 << ISL29028_CONF_PROX_SLP_SH) | 
 |  | 
 | #define ISL29028_CONF_PROX_EN			BIT(7) | 
 | #define ISL29028_CONF_PROX_EN_MASK		BIT(7) | 
 |  | 
 | #define ISL29028_REG_INTERRUPT			0x02 | 
 |  | 
 | #define ISL29028_REG_PROX_DATA			0x08 | 
 | #define ISL29028_REG_ALSIR_L			0x09 | 
 | #define ISL29028_REG_ALSIR_U			0x0A | 
 |  | 
 | #define ISL29028_REG_TEST1_MODE			0x0E | 
 | #define ISL29028_REG_TEST2_MODE			0x0F | 
 |  | 
 | #define ISL29028_NUM_REGS			(ISL29028_REG_TEST2_MODE + 1) | 
 |  | 
 | #define ISL29028_POWER_OFF_DELAY_MS		2000 | 
 |  | 
 | struct isl29028_prox_data { | 
 | 	int sampling_int; | 
 | 	int sampling_fract; | 
 | 	int sleep_time; | 
 | }; | 
 |  | 
 | static const struct isl29028_prox_data isl29028_prox_data[] = { | 
 | 	{   1, 250000, 800 }, | 
 | 	{   2, 500000, 400 }, | 
 | 	{   5,      0, 200 }, | 
 | 	{  10,      0, 100 }, | 
 | 	{  13, 300000,  75 }, | 
 | 	{  20,      0,  50 }, | 
 | 	{  80,      0,  13 }, /* | 
 | 			       * Note: Data sheet lists 12.5 ms sleep time. | 
 | 			       * Round up a half millisecond for msleep(). | 
 | 			       */ | 
 | 	{ 100,  0,   0 } | 
 | }; | 
 |  | 
 | enum isl29028_als_ir_mode { | 
 | 	ISL29028_MODE_NONE = 0, | 
 | 	ISL29028_MODE_ALS, | 
 | 	ISL29028_MODE_IR, | 
 | }; | 
 |  | 
 | struct isl29028_chip { | 
 | 	struct mutex			lock; | 
 | 	struct regmap			*regmap; | 
 | 	int				prox_sampling_int; | 
 | 	int				prox_sampling_frac; | 
 | 	bool				enable_prox; | 
 | 	int				lux_scale; | 
 | 	enum isl29028_als_ir_mode	als_ir_mode; | 
 | }; | 
 |  | 
 | static int isl29028_find_prox_sleep_index(int sampling_int, int sampling_fract) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(isl29028_prox_data); ++i) { | 
 | 		if (isl29028_prox_data[i].sampling_int == sampling_int && | 
 | 		    isl29028_prox_data[i].sampling_fract == sampling_fract) | 
 | 			return i; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int isl29028_set_proxim_sampling(struct isl29028_chip *chip, | 
 | 					int sampling_int, int sampling_fract) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int sleep_index, ret; | 
 |  | 
 | 	sleep_index = isl29028_find_prox_sleep_index(sampling_int, | 
 | 						     sampling_fract); | 
 | 	if (sleep_index < 0) | 
 | 		return sleep_index; | 
 |  | 
 | 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 				 ISL29028_CONF_PROX_SLP_MASK, | 
 | 				 sleep_index << ISL29028_CONF_PROX_SLP_SH); | 
 |  | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s(): Error %d setting the proximity sampling\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	chip->prox_sampling_int = sampling_int; | 
 | 	chip->prox_sampling_frac = sampling_fract; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int isl29028_enable_proximity(struct isl29028_chip *chip) | 
 | { | 
 | 	int prox_index, ret; | 
 |  | 
 | 	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling_int, | 
 | 					   chip->prox_sampling_frac); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 				 ISL29028_CONF_PROX_EN_MASK, | 
 | 				 ISL29028_CONF_PROX_EN); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* Wait for conversion to be complete for first sample */ | 
 | 	prox_index = isl29028_find_prox_sleep_index(chip->prox_sampling_int, | 
 | 						    chip->prox_sampling_frac); | 
 | 	if (prox_index < 0) | 
 | 		return prox_index; | 
 |  | 
 | 	msleep(isl29028_prox_data[prox_index].sleep_time); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int val = (lux_scale == 2000) ? ISL29028_CONF_ALS_RANGE_HIGH_LUX : | 
 | 					ISL29028_CONF_ALS_RANGE_LOW_LUX; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 				 ISL29028_CONF_ALS_RANGE_MASK, val); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s(): Error %d setting the ALS scale\n", __func__, | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	chip->lux_scale = lux_scale; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int isl29028_set_als_ir_mode(struct isl29028_chip *chip, | 
 | 				    enum isl29028_als_ir_mode mode) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (chip->als_ir_mode == mode) | 
 | 		return 0; | 
 |  | 
 | 	ret = isl29028_set_als_scale(chip, chip->lux_scale); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (mode) { | 
 | 	case ISL29028_MODE_ALS: | 
 | 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 					 ISL29028_CONF_ALS_IR_MODE_MASK, | 
 | 					 ISL29028_CONF_ALS_IR_MODE_ALS); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 					 ISL29028_CONF_ALS_RANGE_MASK, | 
 | 					 ISL29028_CONF_ALS_RANGE_HIGH_LUX); | 
 | 		break; | 
 | 	case ISL29028_MODE_IR: | 
 | 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 					 ISL29028_CONF_ALS_IR_MODE_MASK, | 
 | 					 ISL29028_CONF_ALS_IR_MODE_IR); | 
 | 		break; | 
 | 	case ISL29028_MODE_NONE: | 
 | 		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 					  ISL29028_CONF_ALS_EN_MASK, | 
 | 					  ISL29028_CONF_ALS_DIS); | 
 | 	} | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* Enable the ALS/IR */ | 
 | 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, | 
 | 				 ISL29028_CONF_ALS_EN_MASK, | 
 | 				 ISL29028_CONF_ALS_EN); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* Need to wait for conversion time if ALS/IR mode enabled */ | 
 | 	msleep(ISL29028_CONV_TIME_MS); | 
 |  | 
 | 	chip->als_ir_mode = mode; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	unsigned int lsb; | 
 | 	unsigned int msb; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, | 
 | 			"%s(): Error %d reading register ALSIR_L\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, | 
 | 			"%s(): Error %d reading register ALSIR_U\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	unsigned int data; | 
 | 	int ret; | 
 |  | 
 | 	if (!chip->enable_prox) { | 
 | 		ret = isl29028_enable_proximity(chip); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		chip->enable_prox = true; | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s(): Error %d reading register PROX_DATA\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	*prox = data; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_als_get(struct isl29028_chip *chip, int *als_data) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret; | 
 | 	int als_ir_data; | 
 |  | 
 | 	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_ALS); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s(): Error %d enabling ALS mode\n", __func__, | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = isl29028_read_als_ir(chip, &als_ir_data); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * convert als data count to lux. | 
 | 	 * if lux_scale = 125,  lux = count * 0.031 | 
 | 	 * if lux_scale = 2000, lux = count * 0.49 | 
 | 	 */ | 
 | 	if (chip->lux_scale == 125) | 
 | 		als_ir_data = (als_ir_data * 31) / 1000; | 
 | 	else | 
 | 		als_ir_data = (als_ir_data * 49) / 100; | 
 |  | 
 | 	*als_data = als_ir_data; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret; | 
 |  | 
 | 	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_IR); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s(): Error %d enabling IR mode\n", __func__, | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return isl29028_read_als_ir(chip, ir_data); | 
 | } | 
 |  | 
 | static int isl29028_set_pm_runtime_busy(struct isl29028_chip *chip, bool on) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret; | 
 |  | 
 | 	if (on) { | 
 | 		ret = pm_runtime_get_sync(dev); | 
 | 		if (ret < 0) | 
 | 			pm_runtime_put_noidle(dev); | 
 | 	} else { | 
 | 		pm_runtime_mark_last_busy(dev); | 
 | 		ret = pm_runtime_put_autosuspend(dev); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Channel IO */ | 
 | static int isl29028_write_raw(struct iio_dev *indio_dev, | 
 | 			      struct iio_chan_spec const *chan, | 
 | 			      int val, int val2, long mask) | 
 | { | 
 | 	struct isl29028_chip *chip = iio_priv(indio_dev); | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret; | 
 |  | 
 | 	ret = isl29028_set_pm_runtime_busy(chip, true); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 |  | 
 | 	ret = -EINVAL; | 
 | 	switch (chan->type) { | 
 | 	case IIO_PROXIMITY: | 
 | 		if (mask != IIO_CHAN_INFO_SAMP_FREQ) { | 
 | 			dev_err(dev, | 
 | 				"%s(): proximity: Mask value 0x%08lx is not supported\n", | 
 | 				__func__, mask); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (val < 1 || val > 100) { | 
 | 			dev_err(dev, | 
 | 				"%s(): proximity: Sampling frequency %d is not in the range [1:100]\n", | 
 | 				__func__, val); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		ret = isl29028_set_proxim_sampling(chip, val, val2); | 
 | 		break; | 
 | 	case IIO_LIGHT: | 
 | 		if (mask != IIO_CHAN_INFO_SCALE) { | 
 | 			dev_err(dev, | 
 | 				"%s(): light: Mask value 0x%08lx is not supported\n", | 
 | 				__func__, mask); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (val != 125 && val != 2000) { | 
 | 			dev_err(dev, | 
 | 				"%s(): light: Lux scale %d is not in the set {125, 2000}\n", | 
 | 				__func__, val); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		ret = isl29028_set_als_scale(chip, val); | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(dev, "%s(): Unsupported channel type %x\n", | 
 | 			__func__, chan->type); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = isl29028_set_pm_runtime_busy(chip, false); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int isl29028_read_raw(struct iio_dev *indio_dev, | 
 | 			     struct iio_chan_spec const *chan, | 
 | 			     int *val, int *val2, long mask) | 
 | { | 
 | 	struct isl29028_chip *chip = iio_priv(indio_dev); | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret, pm_ret; | 
 |  | 
 | 	ret = isl29028_set_pm_runtime_busy(chip, true); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 |  | 
 | 	ret = -EINVAL; | 
 | 	switch (mask) { | 
 | 	case IIO_CHAN_INFO_RAW: | 
 | 	case IIO_CHAN_INFO_PROCESSED: | 
 | 		switch (chan->type) { | 
 | 		case IIO_LIGHT: | 
 | 			ret = isl29028_als_get(chip, val); | 
 | 			break; | 
 | 		case IIO_INTENSITY: | 
 | 			ret = isl29028_ir_get(chip, val); | 
 | 			break; | 
 | 		case IIO_PROXIMITY: | 
 | 			ret = isl29028_read_proxim(chip, val); | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		ret = IIO_VAL_INT; | 
 | 		break; | 
 | 	case IIO_CHAN_INFO_SAMP_FREQ: | 
 | 		if (chan->type != IIO_PROXIMITY) | 
 | 			break; | 
 |  | 
 | 		*val = chip->prox_sampling_int; | 
 | 		*val2 = chip->prox_sampling_frac; | 
 | 		ret = IIO_VAL_INT; | 
 | 		break; | 
 | 	case IIO_CHAN_INFO_SCALE: | 
 | 		if (chan->type != IIO_LIGHT) | 
 | 			break; | 
 | 		*val = chip->lux_scale; | 
 | 		ret = IIO_VAL_INT; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(dev, "%s(): mask value 0x%08lx is not supported\n", | 
 | 			__func__, mask); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/** | 
 | 	 * Preserve the ret variable if the call to | 
 | 	 * isl29028_set_pm_runtime_busy() is successful so the reading | 
 | 	 * (if applicable) is returned to user space. | 
 | 	 */ | 
 | 	pm_ret = isl29028_set_pm_runtime_busy(chip, false); | 
 | 	if (pm_ret < 0) | 
 | 		return pm_ret; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static IIO_CONST_ATTR(in_proximity_sampling_frequency_available, | 
 | 				"1.25 2.5 5 10 13.3 20 80 100"); | 
 | static IIO_CONST_ATTR(in_illuminance_scale_available, "125 2000"); | 
 |  | 
 | #define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr) | 
 | static struct attribute *isl29028_attributes[] = { | 
 | 	ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available), | 
 | 	ISL29028_CONST_ATTR(in_illuminance_scale_available), | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static const struct attribute_group isl29108_group = { | 
 | 	.attrs = isl29028_attributes, | 
 | }; | 
 |  | 
 | static const struct iio_chan_spec isl29028_channels[] = { | 
 | 	{ | 
 | 		.type = IIO_LIGHT, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | | 
 | 		BIT(IIO_CHAN_INFO_SCALE), | 
 | 	}, { | 
 | 		.type = IIO_INTENSITY, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
 | 	}, { | 
 | 		.type = IIO_PROXIMITY, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | 
 | 		BIT(IIO_CHAN_INFO_SAMP_FREQ), | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct iio_info isl29028_info = { | 
 | 	.attrs = &isl29108_group, | 
 | 	.read_raw = isl29028_read_raw, | 
 | 	.write_raw = isl29028_write_raw, | 
 | }; | 
 |  | 
 | static int isl29028_clear_configure_reg(struct isl29028_chip *chip) | 
 | { | 
 | 	struct device *dev = regmap_get_device(chip->regmap); | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0); | 
 | 	if (ret < 0) | 
 | 		dev_err(dev, "%s(): Error %d clearing the CONFIGURE register\n", | 
 | 			__func__, ret); | 
 |  | 
 | 	chip->als_ir_mode = ISL29028_MODE_NONE; | 
 | 	chip->enable_prox = false; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static bool isl29028_is_volatile_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case ISL29028_REG_INTERRUPT: | 
 | 	case ISL29028_REG_PROX_DATA: | 
 | 	case ISL29028_REG_ALSIR_L: | 
 | 	case ISL29028_REG_ALSIR_U: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct regmap_config isl29028_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | 	.volatile_reg = isl29028_is_volatile_reg, | 
 | 	.max_register = ISL29028_NUM_REGS - 1, | 
 | 	.num_reg_defaults_raw = ISL29028_NUM_REGS, | 
 | 	.cache_type = REGCACHE_RBTREE, | 
 | }; | 
 |  | 
 | static int isl29028_probe(struct i2c_client *client, | 
 | 			  const struct i2c_device_id *id) | 
 | { | 
 | 	struct isl29028_chip *chip; | 
 | 	struct iio_dev *indio_dev; | 
 | 	int ret; | 
 |  | 
 | 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); | 
 | 	if (!indio_dev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chip = iio_priv(indio_dev); | 
 |  | 
 | 	i2c_set_clientdata(client, indio_dev); | 
 | 	mutex_init(&chip->lock); | 
 |  | 
 | 	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config); | 
 | 	if (IS_ERR(chip->regmap)) { | 
 | 		ret = PTR_ERR(chip->regmap); | 
 | 		dev_err(&client->dev, "%s: Error %d initializing regmap\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	chip->enable_prox  = false; | 
 | 	chip->prox_sampling_int = 20; | 
 | 	chip->prox_sampling_frac = 0; | 
 | 	chip->lux_scale = 2000; | 
 |  | 
 | 	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, | 
 | 			"%s(): Error %d writing to TEST1_MODE register\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, | 
 | 			"%s(): Error %d writing to TEST2_MODE register\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = isl29028_clear_configure_reg(chip); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	indio_dev->info = &isl29028_info; | 
 | 	indio_dev->channels = isl29028_channels; | 
 | 	indio_dev->num_channels = ARRAY_SIZE(isl29028_channels); | 
 | 	indio_dev->name = id->name; | 
 | 	indio_dev->dev.parent = &client->dev; | 
 | 	indio_dev->modes = INDIO_DIRECT_MODE; | 
 |  | 
 | 	pm_runtime_enable(&client->dev); | 
 | 	pm_runtime_set_autosuspend_delay(&client->dev, | 
 | 					 ISL29028_POWER_OFF_DELAY_MS); | 
 | 	pm_runtime_use_autosuspend(&client->dev); | 
 |  | 
 | 	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, | 
 | 			"%s(): iio registration failed with error %d\n", | 
 | 			__func__, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int isl29028_remove(struct i2c_client *client) | 
 | { | 
 | 	struct iio_dev *indio_dev = i2c_get_clientdata(client); | 
 | 	struct isl29028_chip *chip = iio_priv(indio_dev); | 
 |  | 
 | 	iio_device_unregister(indio_dev); | 
 |  | 
 | 	pm_runtime_disable(&client->dev); | 
 | 	pm_runtime_set_suspended(&client->dev); | 
 | 	pm_runtime_put_noidle(&client->dev); | 
 |  | 
 | 	return isl29028_clear_configure_reg(chip); | 
 | } | 
 |  | 
 | static int __maybe_unused isl29028_suspend(struct device *dev) | 
 | { | 
 | 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); | 
 | 	struct isl29028_chip *chip = iio_priv(indio_dev); | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&chip->lock); | 
 |  | 
 | 	ret = isl29028_clear_configure_reg(chip); | 
 |  | 
 | 	mutex_unlock(&chip->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __maybe_unused isl29028_resume(struct device *dev) | 
 | { | 
 | 	/** | 
 | 	 * The specific component (ALS/IR or proximity) will enable itself as | 
 | 	 * needed the next time that the user requests a reading. This is done | 
 | 	 * above in isl29028_set_als_ir_mode() and isl29028_enable_proximity(). | 
 | 	 */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dev_pm_ops isl29028_pm_ops = { | 
 | 	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, | 
 | 				pm_runtime_force_resume) | 
 | 	SET_RUNTIME_PM_OPS(isl29028_suspend, isl29028_resume, NULL) | 
 | }; | 
 |  | 
 | static const struct i2c_device_id isl29028_id[] = { | 
 | 	{"isl29028", 0}, | 
 | 	{"isl29030", 0}, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, isl29028_id); | 
 |  | 
 | static const struct of_device_id isl29028_of_match[] = { | 
 | 	{ .compatible = "isl,isl29028", }, /* for backward compat., don't use */ | 
 | 	{ .compatible = "isil,isl29028", }, | 
 | 	{ .compatible = "isil,isl29030", }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, isl29028_of_match); | 
 |  | 
 | static struct i2c_driver isl29028_driver = { | 
 | 	.driver  = { | 
 | 		.name = "isl29028", | 
 | 		.pm = &isl29028_pm_ops, | 
 | 		.of_match_table = isl29028_of_match, | 
 | 	}, | 
 | 	.probe	 = isl29028_probe, | 
 | 	.remove  = isl29028_remove, | 
 | 	.id_table = isl29028_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(isl29028_driver); | 
 |  | 
 | MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |