| /* | 
 |  * MAX44000 Ambient and Infrared Proximity Sensor | 
 |  * | 
 |  * Copyright (c) 2016, Intel Corporation. | 
 |  * | 
 |  * This file is subject to the terms and conditions of version 2 of | 
 |  * the GNU General Public License.  See the file COPYING in the main | 
 |  * directory of this archive for more details. | 
 |  * | 
 |  * Data sheet: https://datasheets.maximintegrated.com/en/ds/MAX44000.pdf | 
 |  * | 
 |  * 7-bit I2C slave address 0x4a | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/util_macros.h> | 
 | #include <linux/iio/iio.h> | 
 | #include <linux/iio/sysfs.h> | 
 | #include <linux/iio/buffer.h> | 
 | #include <linux/iio/trigger_consumer.h> | 
 | #include <linux/iio/triggered_buffer.h> | 
 | #include <linux/acpi.h> | 
 |  | 
 | #define MAX44000_DRV_NAME		"max44000" | 
 |  | 
 | /* Registers in datasheet order */ | 
 | #define MAX44000_REG_STATUS		0x00 | 
 | #define MAX44000_REG_CFG_MAIN		0x01 | 
 | #define MAX44000_REG_CFG_RX		0x02 | 
 | #define MAX44000_REG_CFG_TX		0x03 | 
 | #define MAX44000_REG_ALS_DATA_HI	0x04 | 
 | #define MAX44000_REG_ALS_DATA_LO	0x05 | 
 | #define MAX44000_REG_PRX_DATA		0x16 | 
 | #define MAX44000_REG_ALS_UPTHR_HI	0x06 | 
 | #define MAX44000_REG_ALS_UPTHR_LO	0x07 | 
 | #define MAX44000_REG_ALS_LOTHR_HI	0x08 | 
 | #define MAX44000_REG_ALS_LOTHR_LO	0x09 | 
 | #define MAX44000_REG_PST		0x0a | 
 | #define MAX44000_REG_PRX_IND		0x0b | 
 | #define MAX44000_REG_PRX_THR		0x0c | 
 | #define MAX44000_REG_TRIM_GAIN_GREEN	0x0f | 
 | #define MAX44000_REG_TRIM_GAIN_IR	0x10 | 
 |  | 
 | /* REG_CFG bits */ | 
 | #define MAX44000_CFG_ALSINTE            0x01 | 
 | #define MAX44000_CFG_PRXINTE            0x02 | 
 | #define MAX44000_CFG_MASK               0x1c | 
 | #define MAX44000_CFG_MODE_SHUTDOWN      0x00 | 
 | #define MAX44000_CFG_MODE_ALS_GIR       0x04 | 
 | #define MAX44000_CFG_MODE_ALS_G         0x08 | 
 | #define MAX44000_CFG_MODE_ALS_IR        0x0c | 
 | #define MAX44000_CFG_MODE_ALS_PRX       0x10 | 
 | #define MAX44000_CFG_MODE_PRX           0x14 | 
 | #define MAX44000_CFG_TRIM               0x20 | 
 |  | 
 | /* | 
 |  * Upper 4 bits are not documented but start as 1 on powerup | 
 |  * Setting them to 0 causes proximity to misbehave so set them to 1 | 
 |  */ | 
 | #define MAX44000_REG_CFG_RX_DEFAULT 0xf0 | 
 |  | 
 | /* REG_RX bits */ | 
 | #define MAX44000_CFG_RX_ALSTIM_MASK	0x0c | 
 | #define MAX44000_CFG_RX_ALSTIM_SHIFT	2 | 
 | #define MAX44000_CFG_RX_ALSPGA_MASK	0x03 | 
 | #define MAX44000_CFG_RX_ALSPGA_SHIFT	0 | 
 |  | 
 | /* REG_TX bits */ | 
 | #define MAX44000_LED_CURRENT_MASK	0xf | 
 | #define MAX44000_LED_CURRENT_MAX	11 | 
 | #define MAX44000_LED_CURRENT_DEFAULT	6 | 
 |  | 
 | #define MAX44000_ALSDATA_OVERFLOW	0x4000 | 
 |  | 
 | struct max44000_data { | 
 | 	struct mutex lock; | 
 | 	struct regmap *regmap; | 
 | }; | 
 |  | 
 | /* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ | 
 | #define MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 5 | 
 |  | 
 | /* Scale can be multiplied by up to 128x via ALSPGA for measurement gain */ | 
 | static const int max44000_alspga_shift[] = {0, 2, 4, 7}; | 
 | #define MAX44000_ALSPGA_MAX_SHIFT 7 | 
 |  | 
 | /* | 
 |  * Scale can be multiplied by up to 64x via ALSTIM because of lost resolution | 
 |  * | 
 |  * This scaling factor is hidden from userspace and instead accounted for when | 
 |  * reading raw values from the device. | 
 |  * | 
 |  * This makes it possible to cleanly expose ALSPGA as IIO_CHAN_INFO_SCALE and | 
 |  * ALSTIM as IIO_CHAN_INFO_INT_TIME without the values affecting each other. | 
 |  * | 
 |  * Handling this internally is also required for buffer support because the | 
 |  * channel's scan_type can't be modified dynamically. | 
 |  */ | 
 | static const int max44000_alstim_shift[] = {0, 2, 4, 6}; | 
 | #define MAX44000_ALSTIM_SHIFT(alstim) (2 * (alstim)) | 
 |  | 
 | /* Available integration times with pretty manual alignment: */ | 
 | static const int max44000_int_time_avail_ns_array[] = { | 
 | 	   100000000, | 
 | 	    25000000, | 
 | 	     6250000, | 
 | 	     1562500, | 
 | }; | 
 | static const char max44000_int_time_avail_str[] = | 
 | 	"0.100 " | 
 | 	"0.025 " | 
 | 	"0.00625 " | 
 | 	"0.0015625"; | 
 |  | 
 | /* Available scales (internal to ulux) with pretty manual alignment: */ | 
 | static const int max44000_scale_avail_ulux_array[] = { | 
 | 	    31250, | 
 | 	   125000, | 
 | 	   500000, | 
 | 	  4000000, | 
 | }; | 
 | static const char max44000_scale_avail_str[] = | 
 | 	"0.03125 " | 
 | 	"0.125 " | 
 | 	"0.5 " | 
 | 	 "4"; | 
 |  | 
 | #define MAX44000_SCAN_INDEX_ALS 0 | 
 | #define MAX44000_SCAN_INDEX_PRX 1 | 
 |  | 
 | static const struct iio_chan_spec max44000_channels[] = { | 
 | 	{ | 
 | 		.type = IIO_LIGHT, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
 | 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | | 
 | 					    BIT(IIO_CHAN_INFO_INT_TIME), | 
 | 		.scan_index = MAX44000_SCAN_INDEX_ALS, | 
 | 		.scan_type = { | 
 | 			.sign		= 'u', | 
 | 			.realbits	= 14, | 
 | 			.storagebits	= 16, | 
 | 		} | 
 | 	}, | 
 | 	{ | 
 | 		.type = IIO_PROXIMITY, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
 | 		.scan_index = MAX44000_SCAN_INDEX_PRX, | 
 | 		.scan_type = { | 
 | 			.sign		= 'u', | 
 | 			.realbits	= 8, | 
 | 			.storagebits	= 16, | 
 | 		} | 
 | 	}, | 
 | 	IIO_CHAN_SOFT_TIMESTAMP(2), | 
 | 	{ | 
 | 		.type = IIO_CURRENT, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | 
 | 				      BIT(IIO_CHAN_INFO_SCALE), | 
 | 		.extend_name = "led", | 
 | 		.output = 1, | 
 | 		.scan_index = -1, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int max44000_read_alstim(struct max44000_data *data) | 
 | { | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return (val & MAX44000_CFG_RX_ALSTIM_MASK) >> MAX44000_CFG_RX_ALSTIM_SHIFT; | 
 | } | 
 |  | 
 | static int max44000_write_alstim(struct max44000_data *data, int val) | 
 | { | 
 | 	return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, | 
 | 				 MAX44000_CFG_RX_ALSTIM_MASK, | 
 | 				 val << MAX44000_CFG_RX_ALSTIM_SHIFT); | 
 | } | 
 |  | 
 | static int max44000_read_alspga(struct max44000_data *data) | 
 | { | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return (val & MAX44000_CFG_RX_ALSPGA_MASK) >> MAX44000_CFG_RX_ALSPGA_SHIFT; | 
 | } | 
 |  | 
 | static int max44000_write_alspga(struct max44000_data *data, int val) | 
 | { | 
 | 	return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, | 
 | 				 MAX44000_CFG_RX_ALSPGA_MASK, | 
 | 				 val << MAX44000_CFG_RX_ALSPGA_SHIFT); | 
 | } | 
 |  | 
 | static int max44000_read_alsval(struct max44000_data *data) | 
 | { | 
 | 	u16 regval; | 
 | 	__be16 val; | 
 | 	int alstim, ret; | 
 |  | 
 | 	ret = regmap_bulk_read(data->regmap, MAX44000_REG_ALS_DATA_HI, | 
 | 			       &val, sizeof(val)); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	alstim = ret = max44000_read_alstim(data); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	regval = be16_to_cpu(val); | 
 |  | 
 | 	/* | 
 | 	 * Overflow is explained on datasheet page 17. | 
 | 	 * | 
 | 	 * It's a warning that either the G or IR channel has become saturated | 
 | 	 * and that the value in the register is likely incorrect. | 
 | 	 * | 
 | 	 * The recommendation is to change the scale (ALSPGA). | 
 | 	 * The driver just returns the max representable value. | 
 | 	 */ | 
 | 	if (regval & MAX44000_ALSDATA_OVERFLOW) | 
 | 		return 0x3FFF; | 
 |  | 
 | 	return regval << MAX44000_ALSTIM_SHIFT(alstim); | 
 | } | 
 |  | 
 | static int max44000_write_led_current_raw(struct max44000_data *data, int val) | 
 | { | 
 | 	/* Maybe we should clamp the value instead? */ | 
 | 	if (val < 0 || val > MAX44000_LED_CURRENT_MAX) | 
 | 		return -ERANGE; | 
 | 	if (val >= 8) | 
 | 		val += 4; | 
 | 	return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX, | 
 | 				 MAX44000_LED_CURRENT_MASK, val); | 
 | } | 
 |  | 
 | static int max44000_read_led_current_raw(struct max44000_data *data) | 
 | { | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(data->regmap, MAX44000_REG_CFG_TX, ®val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	regval &= MAX44000_LED_CURRENT_MASK; | 
 | 	if (regval >= 8) | 
 | 		regval -= 4; | 
 | 	return regval; | 
 | } | 
 |  | 
 | static int max44000_read_raw(struct iio_dev *indio_dev, | 
 | 			     struct iio_chan_spec const *chan, | 
 | 			     int *val, int *val2, long mask) | 
 | { | 
 | 	struct max44000_data *data = iio_priv(indio_dev); | 
 | 	int alstim, alspga; | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	switch (mask) { | 
 | 	case IIO_CHAN_INFO_RAW: | 
 | 		switch (chan->type) { | 
 | 		case IIO_LIGHT: | 
 | 			mutex_lock(&data->lock); | 
 | 			ret = max44000_read_alsval(data); | 
 | 			mutex_unlock(&data->lock); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 			*val = ret; | 
 | 			return IIO_VAL_INT; | 
 |  | 
 | 		case IIO_PROXIMITY: | 
 | 			mutex_lock(&data->lock); | 
 | 			ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); | 
 | 			mutex_unlock(&data->lock); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 			*val = regval; | 
 | 			return IIO_VAL_INT; | 
 |  | 
 | 		case IIO_CURRENT: | 
 | 			mutex_lock(&data->lock); | 
 | 			ret = max44000_read_led_current_raw(data); | 
 | 			mutex_unlock(&data->lock); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 			*val = ret; | 
 | 			return IIO_VAL_INT; | 
 |  | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 	case IIO_CHAN_INFO_SCALE: | 
 | 		switch (chan->type) { | 
 | 		case IIO_CURRENT: | 
 | 			/* Output register is in 10s of miliamps */ | 
 | 			*val = 10; | 
 | 			return IIO_VAL_INT; | 
 |  | 
 | 		case IIO_LIGHT: | 
 | 			mutex_lock(&data->lock); | 
 | 			alspga = ret = max44000_read_alspga(data); | 
 | 			mutex_unlock(&data->lock); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			/* Avoid negative shifts */ | 
 | 			*val = (1 << MAX44000_ALSPGA_MAX_SHIFT); | 
 | 			*val2 = MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 | 
 | 					+ MAX44000_ALSPGA_MAX_SHIFT | 
 | 					- max44000_alspga_shift[alspga]; | 
 | 			return IIO_VAL_FRACTIONAL_LOG2; | 
 |  | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 	case IIO_CHAN_INFO_INT_TIME: | 
 | 		mutex_lock(&data->lock); | 
 | 		alstim = ret = max44000_read_alstim(data); | 
 | 		mutex_unlock(&data->lock); | 
 |  | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		*val = 0; | 
 | 		*val2 = max44000_int_time_avail_ns_array[alstim]; | 
 | 		return IIO_VAL_INT_PLUS_NANO; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static int max44000_write_raw(struct iio_dev *indio_dev, | 
 | 			      struct iio_chan_spec const *chan, | 
 | 			      int val, int val2, long mask) | 
 | { | 
 | 	struct max44000_data *data = iio_priv(indio_dev); | 
 | 	int ret; | 
 |  | 
 | 	if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT) { | 
 | 		mutex_lock(&data->lock); | 
 | 		ret = max44000_write_led_current_raw(data, val); | 
 | 		mutex_unlock(&data->lock); | 
 | 		return ret; | 
 | 	} else if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { | 
 | 		s64 valns = val * NSEC_PER_SEC + val2; | 
 | 		int alstim = find_closest_descending(valns, | 
 | 				max44000_int_time_avail_ns_array, | 
 | 				ARRAY_SIZE(max44000_int_time_avail_ns_array)); | 
 | 		mutex_lock(&data->lock); | 
 | 		ret = max44000_write_alstim(data, alstim); | 
 | 		mutex_unlock(&data->lock); | 
 | 		return ret; | 
 | 	} else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) { | 
 | 		s64 valus = val * USEC_PER_SEC + val2; | 
 | 		int alspga = find_closest(valus, | 
 | 				max44000_scale_avail_ulux_array, | 
 | 				ARRAY_SIZE(max44000_scale_avail_ulux_array)); | 
 | 		mutex_lock(&data->lock); | 
 | 		ret = max44000_write_alspga(data, alspga); | 
 | 		mutex_unlock(&data->lock); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int max44000_write_raw_get_fmt(struct iio_dev *indio_dev, | 
 | 				      struct iio_chan_spec const *chan, | 
 | 				      long mask) | 
 | { | 
 | 	if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) | 
 | 		return IIO_VAL_INT_PLUS_NANO; | 
 | 	else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) | 
 | 		return IIO_VAL_INT_PLUS_MICRO; | 
 | 	else | 
 | 		return IIO_VAL_INT; | 
 | } | 
 |  | 
 | static IIO_CONST_ATTR(illuminance_integration_time_available, max44000_int_time_avail_str); | 
 | static IIO_CONST_ATTR(illuminance_scale_available, max44000_scale_avail_str); | 
 |  | 
 | static struct attribute *max44000_attributes[] = { | 
 | 	&iio_const_attr_illuminance_integration_time_available.dev_attr.attr, | 
 | 	&iio_const_attr_illuminance_scale_available.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group max44000_attribute_group = { | 
 | 	.attrs = max44000_attributes, | 
 | }; | 
 |  | 
 | static const struct iio_info max44000_info = { | 
 | 	.read_raw		= max44000_read_raw, | 
 | 	.write_raw		= max44000_write_raw, | 
 | 	.write_raw_get_fmt	= max44000_write_raw_get_fmt, | 
 | 	.attrs			= &max44000_attribute_group, | 
 | }; | 
 |  | 
 | static bool max44000_readable_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case MAX44000_REG_STATUS: | 
 | 	case MAX44000_REG_CFG_MAIN: | 
 | 	case MAX44000_REG_CFG_RX: | 
 | 	case MAX44000_REG_CFG_TX: | 
 | 	case MAX44000_REG_ALS_DATA_HI: | 
 | 	case MAX44000_REG_ALS_DATA_LO: | 
 | 	case MAX44000_REG_PRX_DATA: | 
 | 	case MAX44000_REG_ALS_UPTHR_HI: | 
 | 	case MAX44000_REG_ALS_UPTHR_LO: | 
 | 	case MAX44000_REG_ALS_LOTHR_HI: | 
 | 	case MAX44000_REG_ALS_LOTHR_LO: | 
 | 	case MAX44000_REG_PST: | 
 | 	case MAX44000_REG_PRX_IND: | 
 | 	case MAX44000_REG_PRX_THR: | 
 | 	case MAX44000_REG_TRIM_GAIN_GREEN: | 
 | 	case MAX44000_REG_TRIM_GAIN_IR: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static bool max44000_writeable_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case MAX44000_REG_CFG_MAIN: | 
 | 	case MAX44000_REG_CFG_RX: | 
 | 	case MAX44000_REG_CFG_TX: | 
 | 	case MAX44000_REG_ALS_UPTHR_HI: | 
 | 	case MAX44000_REG_ALS_UPTHR_LO: | 
 | 	case MAX44000_REG_ALS_LOTHR_HI: | 
 | 	case MAX44000_REG_ALS_LOTHR_LO: | 
 | 	case MAX44000_REG_PST: | 
 | 	case MAX44000_REG_PRX_IND: | 
 | 	case MAX44000_REG_PRX_THR: | 
 | 	case MAX44000_REG_TRIM_GAIN_GREEN: | 
 | 	case MAX44000_REG_TRIM_GAIN_IR: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static bool max44000_volatile_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case MAX44000_REG_STATUS: | 
 | 	case MAX44000_REG_ALS_DATA_HI: | 
 | 	case MAX44000_REG_ALS_DATA_LO: | 
 | 	case MAX44000_REG_PRX_DATA: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static bool max44000_precious_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	return reg == MAX44000_REG_STATUS; | 
 | } | 
 |  | 
 | static const struct regmap_config max44000_regmap_config = { | 
 | 	.reg_bits	= 8, | 
 | 	.val_bits	= 8, | 
 |  | 
 | 	.max_register	= MAX44000_REG_PRX_DATA, | 
 | 	.readable_reg	= max44000_readable_reg, | 
 | 	.writeable_reg	= max44000_writeable_reg, | 
 | 	.volatile_reg	= max44000_volatile_reg, | 
 | 	.precious_reg	= max44000_precious_reg, | 
 |  | 
 | 	.use_single_rw	= 1, | 
 | 	.cache_type	= REGCACHE_RBTREE, | 
 | }; | 
 |  | 
 | static irqreturn_t max44000_trigger_handler(int irq, void *p) | 
 | { | 
 | 	struct iio_poll_func *pf = p; | 
 | 	struct iio_dev *indio_dev = pf->indio_dev; | 
 | 	struct max44000_data *data = iio_priv(indio_dev); | 
 | 	u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */ | 
 | 	int index = 0; | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&data->lock); | 
 | 	if (test_bit(MAX44000_SCAN_INDEX_ALS, indio_dev->active_scan_mask)) { | 
 | 		ret = max44000_read_alsval(data); | 
 | 		if (ret < 0) | 
 | 			goto out_unlock; | 
 | 		buf[index++] = ret; | 
 | 	} | 
 | 	if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { | 
 | 		ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); | 
 | 		if (ret < 0) | 
 | 			goto out_unlock; | 
 | 		buf[index] = regval; | 
 | 	} | 
 | 	mutex_unlock(&data->lock); | 
 |  | 
 | 	iio_push_to_buffers_with_timestamp(indio_dev, buf, | 
 | 					   iio_get_time_ns(indio_dev)); | 
 | 	iio_trigger_notify_done(indio_dev->trig); | 
 | 	return IRQ_HANDLED; | 
 |  | 
 | out_unlock: | 
 | 	mutex_unlock(&data->lock); | 
 | 	iio_trigger_notify_done(indio_dev->trig); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int max44000_probe(struct i2c_client *client, | 
 | 			  const struct i2c_device_id *id) | 
 | { | 
 | 	struct max44000_data *data; | 
 | 	struct iio_dev *indio_dev; | 
 | 	int ret, reg; | 
 |  | 
 | 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | 
 | 	if (!indio_dev) | 
 | 		return -ENOMEM; | 
 | 	data = iio_priv(indio_dev); | 
 | 	data->regmap = devm_regmap_init_i2c(client, &max44000_regmap_config); | 
 | 	if (IS_ERR(data->regmap)) { | 
 | 		dev_err(&client->dev, "regmap_init failed!\n"); | 
 | 		return PTR_ERR(data->regmap); | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, indio_dev); | 
 | 	mutex_init(&data->lock); | 
 | 	indio_dev->dev.parent = &client->dev; | 
 | 	indio_dev->info = &max44000_info; | 
 | 	indio_dev->name = MAX44000_DRV_NAME; | 
 | 	indio_dev->channels = max44000_channels; | 
 | 	indio_dev->num_channels = ARRAY_SIZE(max44000_channels); | 
 |  | 
 | 	/* | 
 | 	 * The device doesn't have a reset function so we just clear some | 
 | 	 * important bits at probe time to ensure sane operation. | 
 | 	 * | 
 | 	 * Since we don't support interrupts/events the threshold values are | 
 | 	 * not important. We also don't touch trim values. | 
 | 	 */ | 
 |  | 
 | 	/* Reset ALS scaling bits */ | 
 | 	ret = regmap_write(data->regmap, MAX44000_REG_CFG_RX, | 
 | 			   MAX44000_REG_CFG_RX_DEFAULT); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "failed to write default CFG_RX: %d\n", | 
 | 			ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * By default the LED pulse used for the proximity sensor is disabled. | 
 | 	 * Set a middle value so that we get some sort of valid data by default. | 
 | 	 */ | 
 | 	ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "failed to write init config: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */ | 
 | 	reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX; | 
 | 	ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "failed to write init config: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Read status at least once to clear any stale interrupt bits. */ | 
 | 	ret = regmap_read(data->regmap, MAX44000_REG_STATUS, ®); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "failed to read init status: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = iio_triggered_buffer_setup(indio_dev, NULL, max44000_trigger_handler, NULL); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "iio triggered buffer setup failed\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return iio_device_register(indio_dev); | 
 | } | 
 |  | 
 | static int max44000_remove(struct i2c_client *client) | 
 | { | 
 | 	struct iio_dev *indio_dev = i2c_get_clientdata(client); | 
 |  | 
 | 	iio_device_unregister(indio_dev); | 
 | 	iio_triggered_buffer_cleanup(indio_dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id max44000_id[] = { | 
 | 	{"max44000", 0}, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, max44000_id); | 
 |  | 
 | #ifdef CONFIG_ACPI | 
 | static const struct acpi_device_id max44000_acpi_match[] = { | 
 | 	{"MAX44000", 0}, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); | 
 | #endif | 
 |  | 
 | static struct i2c_driver max44000_driver = { | 
 | 	.driver = { | 
 | 		.name	= MAX44000_DRV_NAME, | 
 | 		.acpi_match_table = ACPI_PTR(max44000_acpi_match), | 
 | 	}, | 
 | 	.probe		= max44000_probe, | 
 | 	.remove		= max44000_remove, | 
 | 	.id_table	= max44000_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(max44000_driver); | 
 |  | 
 | MODULE_AUTHOR("Crestez Dan Leonard <leonard.crestez@intel.com>"); | 
 | MODULE_DESCRIPTION("MAX44000 Ambient and Infrared Proximity Sensor"); | 
 | MODULE_LICENSE("GPL v2"); |