| /* |
| saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags |
| |
| Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef _SAA7115_H_ |
| #define _SAA7115_H_ |
| |
| /* s_routing inputs, outputs, and config */ |
| |
| /* SAA7111/3/4/5 HW inputs */ |
| #define SAA7115_COMPOSITE0 0 |
| #define SAA7115_COMPOSITE1 1 |
| #define SAA7115_COMPOSITE2 2 |
| #define SAA7115_COMPOSITE3 3 |
| #define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ |
| #define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ |
| #define SAA7115_SVIDEO0 6 |
| #define SAA7115_SVIDEO1 7 |
| #define SAA7115_SVIDEO2 8 |
| #define SAA7115_SVIDEO3 9 |
| |
| /* outputs */ |
| #define SAA7115_IPORT_ON 1 |
| #define SAA7115_IPORT_OFF 0 |
| |
| /* SAA7111 specific outputs. */ |
| #define SAA7111_VBI_BYPASS 2 |
| #define SAA7111_FMT_YUV422 0x00 |
| #define SAA7111_FMT_RGB 0x40 |
| #define SAA7111_FMT_CCIR 0x80 |
| #define SAA7111_FMT_YUV411 0xc0 |
| |
| /* config flags */ |
| /* |
| * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit |
| * controls the IDQ signal polarity which is set to 'inverted' if the bit |
| * it 1 and to 'default' if it is 0. |
| */ |
| #define SAA7115_IDQ_IS_DEFAULT (1 << 0) |
| |
| /* s_crystal_freq values and flags */ |
| |
| /* SAA7115 v4l2_crystal_freq frequency values */ |
| #define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ |
| #define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ |
| |
| /* SAA7115 v4l2_crystal_freq audio clock control flags */ |
| #define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ |
| #define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ |
| #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ |
| #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ |
| |
| /* ===== SAA7113 Config enums ===== */ |
| |
| /* Register 0x08 "Horizontal time constant" [Bit 3..4]: |
| * Should be set to "Fast Locking Mode" according to the datasheet, |
| * and that is the default setting in the gm7113c_init table. |
| * saa7113_init sets this value to "VTR Mode". */ |
| enum saa7113_r08_htc { |
| SAA7113_HTC_TV_MODE = 0x00, |
| SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ |
| SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ |
| }; |
| |
| /* Register 0x10 "Output format selection" [Bit 6..7]: |
| * Defaults to ITU_656 as specified in datasheet. */ |
| enum saa7113_r10_ofts { |
| SAA7113_OFTS_ITU_656 = 0x0, /* Default */ |
| SAA7113_OFTS_VFLAG_BY_VREF, |
| SAA7113_OFTS_VFLAG_BY_DATA_TYPE |
| }; |
| |
| /* |
| * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: |
| * This is used to select what data is output on the RTS0 and RTS1 pins. |
| * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) |
| * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified |
| * in the datasheet, but is set to HREF_HS in the saa7113_init table. |
| */ |
| enum saa7113_r12_rts { |
| SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ |
| SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ |
| SAA7113_RTS_GPSW, |
| SAA7115_RTS_HL, |
| SAA7113_RTS_VL, |
| SAA7113_RTS_DL, |
| SAA7113_RTS_PLIN, |
| SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ |
| SAA7113_RTS_HS, |
| SAA7113_RTS_HQ, |
| SAA7113_RTS_ODD, |
| SAA7113_RTS_VS, |
| SAA7113_RTS_V123, |
| SAA7113_RTS_VGATE, |
| SAA7113_RTS_VREF, |
| SAA7113_RTS_FID |
| }; |
| |
| /** |
| * struct saa7115_platform_data - Allow overriding default initialization |
| * |
| * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table |
| * instead of saa7113_init table |
| * (saa7113 only) |
| * @saa7113_r08_htc: [R_08 - Bit 3..4] |
| * @saa7113_r10_vrln: [R_10 - Bit 3] |
| * default: Disabled for gm7113c_init |
| * Enabled for saa7113c_init |
| * @saa7113_r10_ofts: [R_10 - Bit 6..7] |
| * @saa7113_r12_rts0: [R_12 - Bit 0..3] |
| * @saa7113_r12_rts1: [R_12 - Bit 4..7] |
| * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled |
| */ |
| struct saa7115_platform_data { |
| bool saa7113_force_gm7113c_init; |
| enum saa7113_r08_htc *saa7113_r08_htc; |
| bool *saa7113_r10_vrln; |
| enum saa7113_r10_ofts *saa7113_r10_ofts; |
| enum saa7113_r12_rts *saa7113_r12_rts0; |
| enum saa7113_r12_rts *saa7113_r12_rts1; |
| bool *saa7113_r13_adlsb; |
| }; |
| |
| #endif |