| /* | 
 |  * TC Applied Technologies Digital Interface Communications Engine driver | 
 |  * | 
 |  * Copyright (c) Clemens Ladisch <clemens@ladisch.de> | 
 |  * Licensed under the terms of the GNU General Public License, version 2. | 
 |  */ | 
 |  | 
 | #include "dice.h" | 
 |  | 
 | MODULE_DESCRIPTION("DICE driver"); | 
 | MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); | 
 | MODULE_LICENSE("GPL v2"); | 
 |  | 
 | #define OUI_WEISS		0x001c6a | 
 | #define OUI_LOUD		0x000ff2 | 
 | #define OUI_FOCUSRITE		0x00130e | 
 | #define OUI_TCELECTRONIC	0x000166 | 
 | #define OUI_ALESIS		0x000595 | 
 | #define OUI_MAUDIO		0x000d6c | 
 | #define OUI_MYTEK		0x001ee8 | 
 | #define OUI_SSL			0x0050c2	// Actually ID reserved by IEEE. | 
 |  | 
 | #define DICE_CATEGORY_ID	0x04 | 
 | #define WEISS_CATEGORY_ID	0x00 | 
 | #define LOUD_CATEGORY_ID	0x10 | 
 |  | 
 | #define MODEL_ALESIS_IO_BOTH	0x000001 | 
 |  | 
 | static int check_dice_category(struct fw_unit *unit) | 
 | { | 
 | 	struct fw_device *device = fw_parent_device(unit); | 
 | 	struct fw_csr_iterator it; | 
 | 	int key, val, vendor = -1, model = -1; | 
 | 	unsigned int category; | 
 |  | 
 | 	/* | 
 | 	 * Check that GUID and unit directory are constructed according to DICE | 
 | 	 * rules, i.e., that the specifier ID is the GUID's OUI, and that the | 
 | 	 * GUID chip ID consists of the 8-bit category ID, the 10-bit product | 
 | 	 * ID, and a 22-bit serial number. | 
 | 	 */ | 
 | 	fw_csr_iterator_init(&it, unit->directory); | 
 | 	while (fw_csr_iterator_next(&it, &key, &val)) { | 
 | 		switch (key) { | 
 | 		case CSR_SPECIFIER_ID: | 
 | 			vendor = val; | 
 | 			break; | 
 | 		case CSR_MODEL: | 
 | 			model = val; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (vendor == OUI_WEISS) | 
 | 		category = WEISS_CATEGORY_ID; | 
 | 	else if (vendor == OUI_LOUD) | 
 | 		category = LOUD_CATEGORY_ID; | 
 | 	else | 
 | 		category = DICE_CATEGORY_ID; | 
 | 	if (device->config_rom[3] != ((vendor << 8) | category) || | 
 | 	    device->config_rom[4] >> 22 != model) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int check_clock_caps(struct snd_dice *dice) | 
 | { | 
 | 	__be32 value; | 
 | 	int err; | 
 |  | 
 | 	/* some very old firmwares don't tell about their clock support */ | 
 | 	if (dice->clock_caps > 0) { | 
 | 		err = snd_dice_transaction_read_global(dice, | 
 | 						GLOBAL_CLOCK_CAPABILITIES, | 
 | 						&value, 4); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		dice->clock_caps = be32_to_cpu(value); | 
 | 	} else { | 
 | 		/* this should be supported by any device */ | 
 | 		dice->clock_caps = CLOCK_CAP_RATE_44100 | | 
 | 				   CLOCK_CAP_RATE_48000 | | 
 | 				   CLOCK_CAP_SOURCE_ARX1 | | 
 | 				   CLOCK_CAP_SOURCE_INTERNAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dice_card_strings(struct snd_dice *dice) | 
 | { | 
 | 	struct snd_card *card = dice->card; | 
 | 	struct fw_device *dev = fw_parent_device(dice->unit); | 
 | 	char vendor[32], model[32]; | 
 | 	unsigned int i; | 
 | 	int err; | 
 |  | 
 | 	strcpy(card->driver, "DICE"); | 
 |  | 
 | 	strcpy(card->shortname, "DICE"); | 
 | 	BUILD_BUG_ON(NICK_NAME_SIZE < sizeof(card->shortname)); | 
 | 	err = snd_dice_transaction_read_global(dice, GLOBAL_NICK_NAME, | 
 | 					       card->shortname, | 
 | 					       sizeof(card->shortname)); | 
 | 	if (err >= 0) { | 
 | 		/* DICE strings are returned in "always-wrong" endianness */ | 
 | 		BUILD_BUG_ON(sizeof(card->shortname) % 4 != 0); | 
 | 		for (i = 0; i < sizeof(card->shortname); i += 4) | 
 | 			swab32s((u32 *)&card->shortname[i]); | 
 | 		card->shortname[sizeof(card->shortname) - 1] = '\0'; | 
 | 	} | 
 |  | 
 | 	strcpy(vendor, "?"); | 
 | 	fw_csr_string(dev->config_rom + 5, CSR_VENDOR, vendor, sizeof(vendor)); | 
 | 	strcpy(model, "?"); | 
 | 	fw_csr_string(dice->unit->directory, CSR_MODEL, model, sizeof(model)); | 
 | 	snprintf(card->longname, sizeof(card->longname), | 
 | 		 "%s %s (serial %u) at %s, S%d", | 
 | 		 vendor, model, dev->config_rom[4] & 0x3fffff, | 
 | 		 dev_name(&dice->unit->device), 100 << dev->max_speed); | 
 |  | 
 | 	strcpy(card->mixername, "DICE"); | 
 | } | 
 |  | 
 | static void dice_free(struct snd_dice *dice) | 
 | { | 
 | 	snd_dice_stream_destroy_duplex(dice); | 
 | 	snd_dice_transaction_destroy(dice); | 
 | 	fw_unit_put(dice->unit); | 
 |  | 
 | 	mutex_destroy(&dice->mutex); | 
 | 	kfree(dice); | 
 | } | 
 |  | 
 | /* | 
 |  * This module releases the FireWire unit data after all ALSA character devices | 
 |  * are released by applications. This is for releasing stream data or finishing | 
 |  * transactions safely. Thus at returning from .remove(), this module still keep | 
 |  * references for the unit. | 
 |  */ | 
 | static void dice_card_free(struct snd_card *card) | 
 | { | 
 | 	dice_free(card->private_data); | 
 | } | 
 |  | 
 | static void do_registration(struct work_struct *work) | 
 | { | 
 | 	struct snd_dice *dice = container_of(work, struct snd_dice, dwork.work); | 
 | 	int err; | 
 |  | 
 | 	if (dice->registered) | 
 | 		return; | 
 |  | 
 | 	err = snd_card_new(&dice->unit->device, -1, NULL, THIS_MODULE, 0, | 
 | 			   &dice->card); | 
 | 	if (err < 0) | 
 | 		return; | 
 |  | 
 | 	err = snd_dice_transaction_init(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	err = check_clock_caps(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	dice_card_strings(dice); | 
 |  | 
 | 	err = dice->detect_formats(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	err = snd_dice_stream_init_duplex(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	snd_dice_create_proc(dice); | 
 |  | 
 | 	err = snd_dice_create_pcm(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	err = snd_dice_create_midi(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	err = snd_dice_create_hwdep(dice); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	err = snd_card_register(dice->card); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	/* | 
 | 	 * After registered, dice instance can be released corresponding to | 
 | 	 * releasing the sound card instance. | 
 | 	 */ | 
 | 	dice->card->private_free = dice_card_free; | 
 | 	dice->card->private_data = dice; | 
 | 	dice->registered = true; | 
 |  | 
 | 	return; | 
 | error: | 
 | 	snd_dice_stream_destroy_duplex(dice); | 
 | 	snd_dice_transaction_destroy(dice); | 
 | 	snd_dice_stream_destroy_duplex(dice); | 
 | 	snd_card_free(dice->card); | 
 | 	dev_info(&dice->unit->device, | 
 | 		 "Sound card registration failed: %d\n", err); | 
 | } | 
 |  | 
 | static int dice_probe(struct fw_unit *unit, | 
 | 		      const struct ieee1394_device_id *entry) | 
 | { | 
 | 	struct snd_dice *dice; | 
 | 	int err; | 
 |  | 
 | 	if (!entry->driver_data && entry->vendor_id != OUI_SSL) { | 
 | 		err = check_dice_category(unit); | 
 | 		if (err < 0) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* Allocate this independent of sound card instance. */ | 
 | 	dice = kzalloc(sizeof(struct snd_dice), GFP_KERNEL); | 
 | 	if (dice == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dice->unit = fw_unit_get(unit); | 
 | 	dev_set_drvdata(&unit->device, dice); | 
 |  | 
 | 	if (!entry->driver_data) { | 
 | 		dice->detect_formats = snd_dice_stream_detect_current_formats; | 
 | 	} else { | 
 | 		dice->detect_formats = | 
 | 				(snd_dice_detect_formats_t)entry->driver_data; | 
 | 	} | 
 |  | 
 | 	spin_lock_init(&dice->lock); | 
 | 	mutex_init(&dice->mutex); | 
 | 	init_completion(&dice->clock_accepted); | 
 | 	init_waitqueue_head(&dice->hwdep_wait); | 
 |  | 
 | 	/* Allocate and register this sound card later. */ | 
 | 	INIT_DEFERRABLE_WORK(&dice->dwork, do_registration); | 
 | 	snd_fw_schedule_registration(unit, &dice->dwork); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void dice_remove(struct fw_unit *unit) | 
 | { | 
 | 	struct snd_dice *dice = dev_get_drvdata(&unit->device); | 
 |  | 
 | 	/* | 
 | 	 * Confirm to stop the work for registration before the sound card is | 
 | 	 * going to be released. The work is not scheduled again because bus | 
 | 	 * reset handler is not called anymore. | 
 | 	 */ | 
 | 	cancel_delayed_work_sync(&dice->dwork); | 
 |  | 
 | 	if (dice->registered) { | 
 | 		/* No need to wait for releasing card object in this context. */ | 
 | 		snd_card_free_when_closed(dice->card); | 
 | 	} else { | 
 | 		/* Don't forget this case. */ | 
 | 		dice_free(dice); | 
 | 	} | 
 | } | 
 |  | 
 | static void dice_bus_reset(struct fw_unit *unit) | 
 | { | 
 | 	struct snd_dice *dice = dev_get_drvdata(&unit->device); | 
 |  | 
 | 	/* Postpone a workqueue for deferred registration. */ | 
 | 	if (!dice->registered) | 
 | 		snd_fw_schedule_registration(unit, &dice->dwork); | 
 |  | 
 | 	/* The handler address register becomes initialized. */ | 
 | 	snd_dice_transaction_reinit(dice); | 
 |  | 
 | 	/* | 
 | 	 * After registration, userspace can start packet streaming, then this | 
 | 	 * code block works fine. | 
 | 	 */ | 
 | 	if (dice->registered) { | 
 | 		mutex_lock(&dice->mutex); | 
 | 		snd_dice_stream_update_duplex(dice); | 
 | 		mutex_unlock(&dice->mutex); | 
 | 	} | 
 | } | 
 |  | 
 | #define DICE_INTERFACE	0x000001 | 
 |  | 
 | static const struct ieee1394_device_id dice_id_table[] = { | 
 | 	/* M-Audio Profire 2626 has a different value in version field. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_MAUDIO, | 
 | 		.model_id	= 0x000010, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats, | 
 | 	}, | 
 | 	/* M-Audio Profire 610 has a different value in version field. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_MAUDIO, | 
 | 		.model_id	= 0x000011, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_extension_formats, | 
 | 	}, | 
 | 	/* TC Electronic Konnekt 24D. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000020, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Konnekt 8. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000021, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Studio Konnekt 48. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000022, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Konnekt Live. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000023, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Desktop Konnekt 6. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000024, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Impact Twin. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000027, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* TC Electronic Digital Konnekt x32. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_TCELECTRONIC, | 
 | 		.model_id	= 0x000030, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats, | 
 | 	}, | 
 | 	/* Alesis iO14/iO26. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_ALESIS, | 
 | 		.model_id	= MODEL_ALESIS_IO_BOTH, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_alesis_formats, | 
 | 	}, | 
 | 	/* Mytek Stereo 192 DSD-DAC. */ | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_MYTEK, | 
 | 		.model_id	= 0x000002, | 
 | 		.driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats, | 
 | 	}, | 
 | 	// Solid State Logic, Duende Classic and Mini. | 
 | 	// NOTE: each field of GUID in config ROM is not compliant to standard | 
 | 	// DICE scheme. | 
 | 	{ | 
 | 		.match_flags	= IEEE1394_MATCH_VENDOR_ID | | 
 | 				  IEEE1394_MATCH_MODEL_ID, | 
 | 		.vendor_id	= OUI_SSL, | 
 | 		.model_id	= 0x000070, | 
 | 	}, | 
 | 	{ | 
 | 		.match_flags = IEEE1394_MATCH_VERSION, | 
 | 		.version     = DICE_INTERFACE, | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(ieee1394, dice_id_table); | 
 |  | 
 | static struct fw_driver dice_driver = { | 
 | 	.driver   = { | 
 | 		.owner	= THIS_MODULE, | 
 | 		.name	= KBUILD_MODNAME, | 
 | 		.bus	= &fw_bus_type, | 
 | 	}, | 
 | 	.probe    = dice_probe, | 
 | 	.update   = dice_bus_reset, | 
 | 	.remove   = dice_remove, | 
 | 	.id_table = dice_id_table, | 
 | }; | 
 |  | 
 | static int __init alsa_dice_init(void) | 
 | { | 
 | 	return driver_register(&dice_driver.driver); | 
 | } | 
 |  | 
 | static void __exit alsa_dice_exit(void) | 
 | { | 
 | 	driver_unregister(&dice_driver.driver); | 
 | } | 
 |  | 
 | module_init(alsa_dice_init); | 
 | module_exit(alsa_dice_exit); |