| /* | 
 |  * linux/drivers/char/ppdev.c | 
 |  * | 
 |  * This is the code behind /dev/parport* -- it allows a user-space | 
 |  * application to use the parport subsystem. | 
 |  * | 
 |  * Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the License, or (at your option) any later version. | 
 |  * | 
 |  * A /dev/parportx device node represents an arbitrary device | 
 |  * on port 'x'.  The following operations are possible: | 
 |  * | 
 |  * open		do nothing, set up default IEEE 1284 protocol to be COMPAT | 
 |  * close	release port and unregister device (if necessary) | 
 |  * ioctl | 
 |  *   EXCL	register device exclusively (may fail) | 
 |  *   CLAIM	(register device first time) parport_claim_or_block | 
 |  *   RELEASE	parport_release | 
 |  *   SETMODE	set the IEEE 1284 protocol to use for read/write | 
 |  *   SETPHASE	set the IEEE 1284 phase of a particular mode.  Not to be | 
 |  *              confused with ioctl(fd, SETPHASER, &stun). ;-) | 
 |  *   DATADIR	data_forward / data_reverse | 
 |  *   WDATA	write_data | 
 |  *   RDATA	read_data | 
 |  *   WCONTROL	write_control | 
 |  *   RCONTROL	read_control | 
 |  *   FCONTROL	frob_control | 
 |  *   RSTATUS	read_status | 
 |  *   NEGOT	parport_negotiate | 
 |  *   YIELD	parport_yield_blocking | 
 |  *   WCTLONIRQ	on interrupt, set control lines | 
 |  *   CLRIRQ	clear (and return) interrupt count | 
 |  *   SETTIME	sets device timeout (struct timeval) | 
 |  *   GETTIME	gets device timeout (struct timeval) | 
 |  *   GETMODES	gets hardware supported modes (unsigned int) | 
 |  *   GETMODE	gets the current IEEE1284 mode | 
 |  *   GETPHASE   gets the current IEEE1284 phase | 
 |  *   GETFLAGS   gets current (user-visible) flags | 
 |  *   SETFLAGS   sets current (user-visible) flags | 
 |  * read/write	read or write in current IEEE 1284 protocol | 
 |  * select	wait for interrupt (in readfds) | 
 |  * | 
 |  * Changes: | 
 |  * Added SETTIME/GETTIME ioctl, Fred Barnes, 1999. | 
 |  * | 
 |  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25 | 
 |  * - On error, copy_from_user and copy_to_user do not return -EFAULT, | 
 |  *   They return the positive number of bytes *not* copied due to address | 
 |  *   space errors. | 
 |  * | 
 |  * Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001. | 
 |  * Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001 | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/sched/signal.h> | 
 | #include <linux/device.h> | 
 | #include <linux/ioctl.h> | 
 | #include <linux/parport.h> | 
 | #include <linux/ctype.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/major.h> | 
 | #include <linux/ppdev.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/compat.h> | 
 |  | 
 | #define PP_VERSION "ppdev: user-space parallel port driver" | 
 | #define CHRDEV "ppdev" | 
 |  | 
 | struct pp_struct { | 
 | 	struct pardevice *pdev; | 
 | 	wait_queue_head_t irq_wait; | 
 | 	atomic_t irqc; | 
 | 	unsigned int flags; | 
 | 	int irqresponse; | 
 | 	unsigned char irqctl; | 
 | 	struct ieee1284_info state; | 
 | 	struct ieee1284_info saved_state; | 
 | 	long default_inactivity; | 
 | 	int index; | 
 | }; | 
 |  | 
 | /* should we use PARDEVICE_MAX here? */ | 
 | static struct device *devices[PARPORT_MAX]; | 
 |  | 
 | static DEFINE_IDA(ida_index); | 
 |  | 
 | /* pp_struct.flags bitfields */ | 
 | #define PP_CLAIMED    (1<<0) | 
 | #define PP_EXCL       (1<<1) | 
 |  | 
 | /* Other constants */ | 
 | #define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */ | 
 | #define PP_BUFFER_SIZE 1024 | 
 | #define PARDEVICE_MAX 8 | 
 |  | 
 | static DEFINE_MUTEX(pp_do_mutex); | 
 |  | 
 | /* define fixed sized ioctl cmd for y2038 migration */ | 
 | #define PPGETTIME32	_IOR(PP_IOCTL, 0x95, s32[2]) | 
 | #define PPSETTIME32	_IOW(PP_IOCTL, 0x96, s32[2]) | 
 | #define PPGETTIME64	_IOR(PP_IOCTL, 0x95, s64[2]) | 
 | #define PPSETTIME64	_IOW(PP_IOCTL, 0x96, s64[2]) | 
 |  | 
 | static inline void pp_enable_irq(struct pp_struct *pp) | 
 | { | 
 | 	struct parport *port = pp->pdev->port; | 
 |  | 
 | 	port->ops->enable_irq(port); | 
 | } | 
 |  | 
 | static ssize_t pp_read(struct file *file, char __user *buf, size_t count, | 
 | 		       loff_t *ppos) | 
 | { | 
 | 	unsigned int minor = iminor(file_inode(file)); | 
 | 	struct pp_struct *pp = file->private_data; | 
 | 	char *kbuffer; | 
 | 	ssize_t bytes_read = 0; | 
 | 	struct parport *pport; | 
 | 	int mode; | 
 |  | 
 | 	if (!(pp->flags & PP_CLAIMED)) { | 
 | 		/* Don't have the port claimed */ | 
 | 		pr_debug(CHRDEV "%x: claim the port first\n", minor); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Trivial case. */ | 
 | 	if (count == 0) | 
 | 		return 0; | 
 |  | 
 | 	kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | 
 | 	if (!kbuffer) | 
 | 		return -ENOMEM; | 
 | 	pport = pp->pdev->port; | 
 | 	mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | 
 |  | 
 | 	parport_set_timeout(pp->pdev, | 
 | 			    (file->f_flags & O_NONBLOCK) ? | 
 | 			    PARPORT_INACTIVITY_O_NONBLOCK : | 
 | 			    pp->default_inactivity); | 
 |  | 
 | 	while (bytes_read == 0) { | 
 | 		ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE); | 
 |  | 
 | 		if (mode == IEEE1284_MODE_EPP) { | 
 | 			/* various specials for EPP mode */ | 
 | 			int flags = 0; | 
 | 			size_t (*fn)(struct parport *, void *, size_t, int); | 
 |  | 
 | 			if (pp->flags & PP_W91284PIC) | 
 | 				flags |= PARPORT_W91284PIC; | 
 | 			if (pp->flags & PP_FASTREAD) | 
 | 				flags |= PARPORT_EPP_FAST; | 
 | 			if (pport->ieee1284.mode & IEEE1284_ADDR) | 
 | 				fn = pport->ops->epp_read_addr; | 
 | 			else | 
 | 				fn = pport->ops->epp_read_data; | 
 | 			bytes_read = (*fn)(pport, kbuffer, need, flags); | 
 | 		} else { | 
 | 			bytes_read = parport_read(pport, kbuffer, need); | 
 | 		} | 
 |  | 
 | 		if (bytes_read != 0) | 
 | 			break; | 
 |  | 
 | 		if (file->f_flags & O_NONBLOCK) { | 
 | 			bytes_read = -EAGAIN; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (signal_pending(current)) { | 
 | 			bytes_read = -ERESTARTSYS; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		cond_resched(); | 
 | 	} | 
 |  | 
 | 	parport_set_timeout(pp->pdev, pp->default_inactivity); | 
 |  | 
 | 	if (bytes_read > 0 && copy_to_user(buf, kbuffer, bytes_read)) | 
 | 		bytes_read = -EFAULT; | 
 |  | 
 | 	kfree(kbuffer); | 
 | 	pp_enable_irq(pp); | 
 | 	return bytes_read; | 
 | } | 
 |  | 
 | static ssize_t pp_write(struct file *file, const char __user *buf, | 
 | 			size_t count, loff_t *ppos) | 
 | { | 
 | 	unsigned int minor = iminor(file_inode(file)); | 
 | 	struct pp_struct *pp = file->private_data; | 
 | 	char *kbuffer; | 
 | 	ssize_t bytes_written = 0; | 
 | 	ssize_t wrote; | 
 | 	int mode; | 
 | 	struct parport *pport; | 
 |  | 
 | 	if (!(pp->flags & PP_CLAIMED)) { | 
 | 		/* Don't have the port claimed */ | 
 | 		pr_debug(CHRDEV "%x: claim the port first\n", minor); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | 
 | 	if (!kbuffer) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pport = pp->pdev->port; | 
 | 	mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | 
 |  | 
 | 	parport_set_timeout(pp->pdev, | 
 | 			    (file->f_flags & O_NONBLOCK) ? | 
 | 			    PARPORT_INACTIVITY_O_NONBLOCK : | 
 | 			    pp->default_inactivity); | 
 |  | 
 | 	while (bytes_written < count) { | 
 | 		ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE); | 
 |  | 
 | 		if (copy_from_user(kbuffer, buf + bytes_written, n)) { | 
 | 			bytes_written = -EFAULT; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) { | 
 | 			/* do a fast EPP write */ | 
 | 			if (pport->ieee1284.mode & IEEE1284_ADDR) { | 
 | 				wrote = pport->ops->epp_write_addr(pport, | 
 | 					kbuffer, n, PARPORT_EPP_FAST); | 
 | 			} else { | 
 | 				wrote = pport->ops->epp_write_data(pport, | 
 | 					kbuffer, n, PARPORT_EPP_FAST); | 
 | 			} | 
 | 		} else { | 
 | 			wrote = parport_write(pp->pdev->port, kbuffer, n); | 
 | 		} | 
 |  | 
 | 		if (wrote <= 0) { | 
 | 			if (!bytes_written) | 
 | 				bytes_written = wrote; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		bytes_written += wrote; | 
 |  | 
 | 		if (file->f_flags & O_NONBLOCK) { | 
 | 			if (!bytes_written) | 
 | 				bytes_written = -EAGAIN; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (signal_pending(current)) | 
 | 			break; | 
 |  | 
 | 		cond_resched(); | 
 | 	} | 
 |  | 
 | 	parport_set_timeout(pp->pdev, pp->default_inactivity); | 
 |  | 
 | 	kfree(kbuffer); | 
 | 	pp_enable_irq(pp); | 
 | 	return bytes_written; | 
 | } | 
 |  | 
 | static void pp_irq(void *private) | 
 | { | 
 | 	struct pp_struct *pp = private; | 
 |  | 
 | 	if (pp->irqresponse) { | 
 | 		parport_write_control(pp->pdev->port, pp->irqctl); | 
 | 		pp->irqresponse = 0; | 
 | 	} | 
 |  | 
 | 	atomic_inc(&pp->irqc); | 
 | 	wake_up_interruptible(&pp->irq_wait); | 
 | } | 
 |  | 
 | static int register_device(int minor, struct pp_struct *pp) | 
 | { | 
 | 	struct parport *port; | 
 | 	struct pardevice *pdev = NULL; | 
 | 	char *name; | 
 | 	struct pardev_cb ppdev_cb; | 
 | 	int rc = 0, index; | 
 |  | 
 | 	name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor); | 
 | 	if (name == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	port = parport_find_number(minor); | 
 | 	if (!port) { | 
 | 		pr_warn("%s: no associated port!\n", name); | 
 | 		rc = -ENXIO; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL); | 
 | 	memset(&ppdev_cb, 0, sizeof(ppdev_cb)); | 
 | 	ppdev_cb.irq_func = pp_irq; | 
 | 	ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0; | 
 | 	ppdev_cb.private = pp; | 
 | 	pdev = parport_register_dev_model(port, name, &ppdev_cb, index); | 
 | 	parport_put_port(port); | 
 |  | 
 | 	if (!pdev) { | 
 | 		pr_warn("%s: failed to register device!\n", name); | 
 | 		rc = -ENXIO; | 
 | 		ida_simple_remove(&ida_index, index); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	pp->pdev = pdev; | 
 | 	pp->index = index; | 
 | 	dev_dbg(&pdev->dev, "registered pardevice\n"); | 
 | err: | 
 | 	kfree(name); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static enum ieee1284_phase init_phase(int mode) | 
 | { | 
 | 	switch (mode & ~(IEEE1284_DEVICEID | 
 | 			 | IEEE1284_ADDR)) { | 
 | 	case IEEE1284_MODE_NIBBLE: | 
 | 	case IEEE1284_MODE_BYTE: | 
 | 		return IEEE1284_PH_REV_IDLE; | 
 | 	} | 
 | 	return IEEE1284_PH_FWD_IDLE; | 
 | } | 
 |  | 
 | static int pp_set_timeout(struct pardevice *pdev, long tv_sec, int tv_usec) | 
 | { | 
 | 	long to_jiffies; | 
 |  | 
 | 	if ((tv_sec < 0) || (tv_usec < 0)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	to_jiffies = usecs_to_jiffies(tv_usec); | 
 | 	to_jiffies += tv_sec * HZ; | 
 | 	if (to_jiffies <= 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pdev->timeout = to_jiffies; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	unsigned int minor = iminor(file_inode(file)); | 
 | 	struct pp_struct *pp = file->private_data; | 
 | 	struct parport *port; | 
 | 	void __user *argp = (void __user *)arg; | 
 |  | 
 | 	/* First handle the cases that don't take arguments. */ | 
 | 	switch (cmd) { | 
 | 	case PPCLAIM: | 
 | 	    { | 
 | 		struct ieee1284_info *info; | 
 | 		int ret; | 
 |  | 
 | 		if (pp->flags & PP_CLAIMED) { | 
 | 			dev_dbg(&pp->pdev->dev, "you've already got it!\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		/* Deferred device registration. */ | 
 | 		if (!pp->pdev) { | 
 | 			int err = register_device(minor, pp); | 
 |  | 
 | 			if (err) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 		ret = parport_claim_or_block(pp->pdev); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		pp->flags |= PP_CLAIMED; | 
 |  | 
 | 		/* For interrupt-reporting to work, we need to be | 
 | 		 * informed of each interrupt. */ | 
 | 		pp_enable_irq(pp); | 
 |  | 
 | 		/* We may need to fix up the state machine. */ | 
 | 		info = &pp->pdev->port->ieee1284; | 
 | 		pp->saved_state.mode = info->mode; | 
 | 		pp->saved_state.phase = info->phase; | 
 | 		info->mode = pp->state.mode; | 
 | 		info->phase = pp->state.phase; | 
 | 		pp->default_inactivity = parport_set_timeout(pp->pdev, 0); | 
 | 		parport_set_timeout(pp->pdev, pp->default_inactivity); | 
 |  | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPEXCL: | 
 | 		if (pp->pdev) { | 
 | 			dev_dbg(&pp->pdev->dev, | 
 | 				"too late for PPEXCL; already registered\n"); | 
 | 			if (pp->flags & PP_EXCL) | 
 | 				/* But it's not really an error. */ | 
 | 				return 0; | 
 | 			/* There's no chance of making the driver happy. */ | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		/* Just remember to register the device exclusively | 
 | 		 * when we finally do the registration. */ | 
 | 		pp->flags |= PP_EXCL; | 
 | 		return 0; | 
 | 	case PPSETMODE: | 
 | 	    { | 
 | 		int mode; | 
 |  | 
 | 		if (copy_from_user(&mode, argp, sizeof(mode))) | 
 | 			return -EFAULT; | 
 | 		/* FIXME: validate mode */ | 
 | 		pp->state.mode = mode; | 
 | 		pp->state.phase = init_phase(mode); | 
 |  | 
 | 		if (pp->flags & PP_CLAIMED) { | 
 | 			pp->pdev->port->ieee1284.mode = mode; | 
 | 			pp->pdev->port->ieee1284.phase = pp->state.phase; | 
 | 		} | 
 |  | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPGETMODE: | 
 | 	    { | 
 | 		int mode; | 
 |  | 
 | 		if (pp->flags & PP_CLAIMED) | 
 | 			mode = pp->pdev->port->ieee1284.mode; | 
 | 		else | 
 | 			mode = pp->state.mode; | 
 |  | 
 | 		if (copy_to_user(argp, &mode, sizeof(mode))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPSETPHASE: | 
 | 	    { | 
 | 		int phase; | 
 |  | 
 | 		if (copy_from_user(&phase, argp, sizeof(phase))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		/* FIXME: validate phase */ | 
 | 		pp->state.phase = phase; | 
 |  | 
 | 		if (pp->flags & PP_CLAIMED) | 
 | 			pp->pdev->port->ieee1284.phase = phase; | 
 |  | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPGETPHASE: | 
 | 	    { | 
 | 		int phase; | 
 |  | 
 | 		if (pp->flags & PP_CLAIMED) | 
 | 			phase = pp->pdev->port->ieee1284.phase; | 
 | 		else | 
 | 			phase = pp->state.phase; | 
 | 		if (copy_to_user(argp, &phase, sizeof(phase))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPGETMODES: | 
 | 	    { | 
 | 		unsigned int modes; | 
 |  | 
 | 		port = parport_find_number(minor); | 
 | 		if (!port) | 
 | 			return -ENODEV; | 
 |  | 
 | 		modes = port->modes; | 
 | 		parport_put_port(port); | 
 | 		if (copy_to_user(argp, &modes, sizeof(modes))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPSETFLAGS: | 
 | 	    { | 
 | 		int uflags; | 
 |  | 
 | 		if (copy_from_user(&uflags, argp, sizeof(uflags))) | 
 | 			return -EFAULT; | 
 | 		pp->flags &= ~PP_FLAGMASK; | 
 | 		pp->flags |= (uflags & PP_FLAGMASK); | 
 | 		return 0; | 
 | 	    } | 
 | 	case PPGETFLAGS: | 
 | 	    { | 
 | 		int uflags; | 
 |  | 
 | 		uflags = pp->flags & PP_FLAGMASK; | 
 | 		if (copy_to_user(argp, &uflags, sizeof(uflags))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	    } | 
 | 	}	/* end switch() */ | 
 |  | 
 | 	/* Everything else requires the port to be claimed, so check | 
 | 	 * that now. */ | 
 | 	if ((pp->flags & PP_CLAIMED) == 0) { | 
 | 		pr_debug(CHRDEV "%x: claim the port first\n", minor); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	port = pp->pdev->port; | 
 | 	switch (cmd) { | 
 | 		struct ieee1284_info *info; | 
 | 		unsigned char reg; | 
 | 		unsigned char mask; | 
 | 		int mode; | 
 | 		s32 time32[2]; | 
 | 		s64 time64[2]; | 
 | 		struct timespec64 ts; | 
 | 		int ret; | 
 |  | 
 | 	case PPRSTATUS: | 
 | 		reg = parport_read_status(port); | 
 | 		if (copy_to_user(argp, ®, sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	case PPRDATA: | 
 | 		reg = parport_read_data(port); | 
 | 		if (copy_to_user(argp, ®, sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	case PPRCONTROL: | 
 | 		reg = parport_read_control(port); | 
 | 		if (copy_to_user(argp, ®, sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	case PPYIELD: | 
 | 		parport_yield_blocking(pp->pdev); | 
 | 		return 0; | 
 |  | 
 | 	case PPRELEASE: | 
 | 		/* Save the state machine's state. */ | 
 | 		info = &pp->pdev->port->ieee1284; | 
 | 		pp->state.mode = info->mode; | 
 | 		pp->state.phase = info->phase; | 
 | 		info->mode = pp->saved_state.mode; | 
 | 		info->phase = pp->saved_state.phase; | 
 | 		parport_release(pp->pdev); | 
 | 		pp->flags &= ~PP_CLAIMED; | 
 | 		return 0; | 
 |  | 
 | 	case PPWCONTROL: | 
 | 		if (copy_from_user(®, argp, sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		parport_write_control(port, reg); | 
 | 		return 0; | 
 |  | 
 | 	case PPWDATA: | 
 | 		if (copy_from_user(®, argp, sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		parport_write_data(port, reg); | 
 | 		return 0; | 
 |  | 
 | 	case PPFCONTROL: | 
 | 		if (copy_from_user(&mask, argp, | 
 | 				   sizeof(mask))) | 
 | 			return -EFAULT; | 
 | 		if (copy_from_user(®, 1 + (unsigned char __user *) arg, | 
 | 				   sizeof(reg))) | 
 | 			return -EFAULT; | 
 | 		parport_frob_control(port, mask, reg); | 
 | 		return 0; | 
 |  | 
 | 	case PPDATADIR: | 
 | 		if (copy_from_user(&mode, argp, sizeof(mode))) | 
 | 			return -EFAULT; | 
 | 		if (mode) | 
 | 			port->ops->data_reverse(port); | 
 | 		else | 
 | 			port->ops->data_forward(port); | 
 | 		return 0; | 
 |  | 
 | 	case PPNEGOT: | 
 | 		if (copy_from_user(&mode, argp, sizeof(mode))) | 
 | 			return -EFAULT; | 
 | 		switch ((ret = parport_negotiate(port, mode))) { | 
 | 		case 0: break; | 
 | 		case -1: /* handshake failed, peripheral not IEEE 1284 */ | 
 | 			ret = -EIO; | 
 | 			break; | 
 | 		case 1:  /* handshake succeeded, peripheral rejected mode */ | 
 | 			ret = -ENXIO; | 
 | 			break; | 
 | 		} | 
 | 		pp_enable_irq(pp); | 
 | 		return ret; | 
 |  | 
 | 	case PPWCTLONIRQ: | 
 | 		if (copy_from_user(®, argp, sizeof(reg))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		/* Remember what to set the control lines to, for next | 
 | 		 * time we get an interrupt. */ | 
 | 		pp->irqctl = reg; | 
 | 		pp->irqresponse = 1; | 
 | 		return 0; | 
 |  | 
 | 	case PPCLRIRQ: | 
 | 		ret = atomic_read(&pp->irqc); | 
 | 		if (copy_to_user(argp, &ret, sizeof(ret))) | 
 | 			return -EFAULT; | 
 | 		atomic_sub(ret, &pp->irqc); | 
 | 		return 0; | 
 |  | 
 | 	case PPSETTIME32: | 
 | 		if (copy_from_user(time32, argp, sizeof(time32))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if ((time32[0] < 0) || (time32[1] < 0)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		return pp_set_timeout(pp->pdev, time32[0], time32[1]); | 
 |  | 
 | 	case PPSETTIME64: | 
 | 		if (copy_from_user(time64, argp, sizeof(time64))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if ((time64[0] < 0) || (time64[1] < 0)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall()) | 
 | 			time64[1] >>= 32; | 
 |  | 
 | 		return pp_set_timeout(pp->pdev, time64[0], time64[1]); | 
 |  | 
 | 	case PPGETTIME32: | 
 | 		jiffies_to_timespec64(pp->pdev->timeout, &ts); | 
 | 		time32[0] = ts.tv_sec; | 
 | 		time32[1] = ts.tv_nsec / NSEC_PER_USEC; | 
 |  | 
 | 		if (copy_to_user(argp, time32, sizeof(time32))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		return 0; | 
 |  | 
 | 	case PPGETTIME64: | 
 | 		jiffies_to_timespec64(pp->pdev->timeout, &ts); | 
 | 		time64[0] = ts.tv_sec; | 
 | 		time64[1] = ts.tv_nsec / NSEC_PER_USEC; | 
 |  | 
 | 		if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall()) | 
 | 			time64[1] <<= 32; | 
 |  | 
 | 		if (copy_to_user(argp, time64, sizeof(time64))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		return 0; | 
 |  | 
 | 	default: | 
 | 		dev_dbg(&pp->pdev->dev, "What? (cmd=0x%x)\n", cmd); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Keep the compiler happy */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	long ret; | 
 |  | 
 | 	mutex_lock(&pp_do_mutex); | 
 | 	ret = pp_do_ioctl(file, cmd, arg); | 
 | 	mutex_unlock(&pp_do_mutex); | 
 | 	return ret; | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | static long pp_compat_ioctl(struct file *file, unsigned int cmd, | 
 | 			    unsigned long arg) | 
 | { | 
 | 	return pp_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); | 
 | } | 
 | #endif | 
 |  | 
 | static int pp_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	unsigned int minor = iminor(inode); | 
 | 	struct pp_struct *pp; | 
 |  | 
 | 	if (minor >= PARPORT_MAX) | 
 | 		return -ENXIO; | 
 |  | 
 | 	pp = kmalloc(sizeof(struct pp_struct), GFP_KERNEL); | 
 | 	if (!pp) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pp->state.mode = IEEE1284_MODE_COMPAT; | 
 | 	pp->state.phase = init_phase(pp->state.mode); | 
 | 	pp->flags = 0; | 
 | 	pp->irqresponse = 0; | 
 | 	atomic_set(&pp->irqc, 0); | 
 | 	init_waitqueue_head(&pp->irq_wait); | 
 |  | 
 | 	/* Defer the actual device registration until the first claim. | 
 | 	 * That way, we know whether or not the driver wants to have | 
 | 	 * exclusive access to the port (PPEXCL). | 
 | 	 */ | 
 | 	pp->pdev = NULL; | 
 | 	file->private_data = pp; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pp_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	unsigned int minor = iminor(inode); | 
 | 	struct pp_struct *pp = file->private_data; | 
 | 	int compat_negot; | 
 |  | 
 | 	compat_negot = 0; | 
 | 	if (!(pp->flags & PP_CLAIMED) && pp->pdev && | 
 | 	    (pp->state.mode != IEEE1284_MODE_COMPAT)) { | 
 | 		struct ieee1284_info *info; | 
 |  | 
 | 		/* parport released, but not in compatibility mode */ | 
 | 		parport_claim_or_block(pp->pdev); | 
 | 		pp->flags |= PP_CLAIMED; | 
 | 		info = &pp->pdev->port->ieee1284; | 
 | 		pp->saved_state.mode = info->mode; | 
 | 		pp->saved_state.phase = info->phase; | 
 | 		info->mode = pp->state.mode; | 
 | 		info->phase = pp->state.phase; | 
 | 		compat_negot = 1; | 
 | 	} else if ((pp->flags & PP_CLAIMED) && pp->pdev && | 
 | 	    (pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) { | 
 | 		compat_negot = 2; | 
 | 	} | 
 | 	if (compat_negot) { | 
 | 		parport_negotiate(pp->pdev->port, IEEE1284_MODE_COMPAT); | 
 | 		dev_dbg(&pp->pdev->dev, | 
 | 			"negotiated back to compatibility mode because user-space forgot\n"); | 
 | 	} | 
 |  | 
 | 	if (pp->flags & PP_CLAIMED) { | 
 | 		struct ieee1284_info *info; | 
 |  | 
 | 		info = &pp->pdev->port->ieee1284; | 
 | 		pp->state.mode = info->mode; | 
 | 		pp->state.phase = info->phase; | 
 | 		info->mode = pp->saved_state.mode; | 
 | 		info->phase = pp->saved_state.phase; | 
 | 		parport_release(pp->pdev); | 
 | 		if (compat_negot != 1) { | 
 | 			pr_debug(CHRDEV "%x: released pardevice " | 
 | 				"because user-space forgot\n", minor); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (pp->pdev) { | 
 | 		parport_unregister_device(pp->pdev); | 
 | 		ida_simple_remove(&ida_index, pp->index); | 
 | 		pp->pdev = NULL; | 
 | 		pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); | 
 | 	} | 
 |  | 
 | 	kfree(pp); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* No kernel lock held - fine */ | 
 | static __poll_t pp_poll(struct file *file, poll_table *wait) | 
 | { | 
 | 	struct pp_struct *pp = file->private_data; | 
 | 	__poll_t mask = 0; | 
 |  | 
 | 	poll_wait(file, &pp->irq_wait, wait); | 
 | 	if (atomic_read(&pp->irqc)) | 
 | 		mask |= EPOLLIN | EPOLLRDNORM; | 
 |  | 
 | 	return mask; | 
 | } | 
 |  | 
 | static struct class *ppdev_class; | 
 |  | 
 | static const struct file_operations pp_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.read		= pp_read, | 
 | 	.write		= pp_write, | 
 | 	.poll		= pp_poll, | 
 | 	.unlocked_ioctl	= pp_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl   = pp_compat_ioctl, | 
 | #endif | 
 | 	.open		= pp_open, | 
 | 	.release	= pp_release, | 
 | }; | 
 |  | 
 | static void pp_attach(struct parport *port) | 
 | { | 
 | 	struct device *ret; | 
 |  | 
 | 	if (devices[port->number]) | 
 | 		return; | 
 |  | 
 | 	ret = device_create(ppdev_class, port->dev, | 
 | 			    MKDEV(PP_MAJOR, port->number), NULL, | 
 | 			    "parport%d", port->number); | 
 | 	if (IS_ERR(ret)) { | 
 | 		pr_err("Failed to create device parport%d\n", | 
 | 		       port->number); | 
 | 		return; | 
 | 	} | 
 | 	devices[port->number] = ret; | 
 | } | 
 |  | 
 | static void pp_detach(struct parport *port) | 
 | { | 
 | 	if (!devices[port->number]) | 
 | 		return; | 
 |  | 
 | 	device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); | 
 | 	devices[port->number] = NULL; | 
 | } | 
 |  | 
 | static int pp_probe(struct pardevice *par_dev) | 
 | { | 
 | 	struct device_driver *drv = par_dev->dev.driver; | 
 | 	int len = strlen(drv->name); | 
 |  | 
 | 	if (strncmp(par_dev->name, drv->name, len)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct parport_driver pp_driver = { | 
 | 	.name		= CHRDEV, | 
 | 	.probe		= pp_probe, | 
 | 	.match_port	= pp_attach, | 
 | 	.detach		= pp_detach, | 
 | 	.devmodel	= true, | 
 | }; | 
 |  | 
 | static int __init ppdev_init(void) | 
 | { | 
 | 	int err = 0; | 
 |  | 
 | 	if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) { | 
 | 		pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR); | 
 | 		return -EIO; | 
 | 	} | 
 | 	ppdev_class = class_create(THIS_MODULE, CHRDEV); | 
 | 	if (IS_ERR(ppdev_class)) { | 
 | 		err = PTR_ERR(ppdev_class); | 
 | 		goto out_chrdev; | 
 | 	} | 
 | 	err = parport_register_driver(&pp_driver); | 
 | 	if (err < 0) { | 
 | 		pr_warn(CHRDEV ": unable to register with parport\n"); | 
 | 		goto out_class; | 
 | 	} | 
 |  | 
 | 	pr_info(PP_VERSION "\n"); | 
 | 	goto out; | 
 |  | 
 | out_class: | 
 | 	class_destroy(ppdev_class); | 
 | out_chrdev: | 
 | 	unregister_chrdev(PP_MAJOR, CHRDEV); | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | static void __exit ppdev_cleanup(void) | 
 | { | 
 | 	/* Clean up all parport stuff */ | 
 | 	parport_unregister_driver(&pp_driver); | 
 | 	class_destroy(ppdev_class); | 
 | 	unregister_chrdev(PP_MAJOR, CHRDEV); | 
 | } | 
 |  | 
 | module_init(ppdev_init); | 
 | module_exit(ppdev_cleanup); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR); |