| /* | 
 |  * drivers/leds/leds-apu.c | 
 |  * Copyright (C) 2017 Alan Mizrahi, alan at mizrahi dot com dot ve | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions are met: | 
 |  * | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * 3. Neither the names of the copyright holders nor the names of its | 
 |  *    contributors may be used to endorse or promote products derived from | 
 |  *    this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | 
 |  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
 |  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
 |  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | 
 |  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | 
 |  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | 
 |  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | 
 |  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | 
 |  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
 |  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #include <linux/dmi.h> | 
 | #include <linux/err.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #define APU1_FCH_ACPI_MMIO_BASE 0xFED80000 | 
 | #define APU1_FCH_GPIO_BASE      (APU1_FCH_ACPI_MMIO_BASE + 0x01BD) | 
 | #define APU1_LEDON              0x08 | 
 | #define APU1_LEDOFF             0xC8 | 
 | #define APU1_NUM_GPIO           3 | 
 | #define APU1_IOSIZE             sizeof(u8) | 
 |  | 
 | #define APU2_FCH_ACPI_MMIO_BASE 0xFED80000 | 
 | #define APU2_FCH_GPIO_BASE      (APU2_FCH_ACPI_MMIO_BASE + 0x1500) | 
 | #define APU2_GPIO_BIT_WRITE     22 | 
 | #define APU2_APU2_NUM_GPIO      4 | 
 | #define APU2_IOSIZE             sizeof(u32) | 
 |  | 
 | /* LED access parameters */ | 
 | struct apu_param { | 
 | 	void __iomem *addr; /* for ioread/iowrite */ | 
 | }; | 
 |  | 
 | /* LED private data */ | 
 | struct apu_led_priv { | 
 | 	struct led_classdev cdev; | 
 | 	struct apu_param param; | 
 | }; | 
 | #define cdev_to_priv(c) container_of(c, struct apu_led_priv, cdev) | 
 |  | 
 | /* LED profile */ | 
 | struct apu_led_profile { | 
 | 	const char *name; | 
 | 	enum led_brightness brightness; | 
 | 	unsigned long offset; /* for devm_ioremap */ | 
 | }; | 
 |  | 
 | /* Supported platform types */ | 
 | enum apu_led_platform_types { | 
 | 	APU1_LED_PLATFORM, | 
 | 	APU2_LED_PLATFORM, | 
 | }; | 
 |  | 
 | struct apu_led_pdata { | 
 | 	struct platform_device *pdev; | 
 | 	struct apu_led_priv *pled; | 
 | 	const struct apu_led_profile *profile; | 
 | 	enum apu_led_platform_types platform; | 
 | 	int num_led_instances; | 
 | 	int iosize; /* for devm_ioremap() */ | 
 | 	spinlock_t lock; | 
 | }; | 
 |  | 
 | static struct apu_led_pdata *apu_led; | 
 |  | 
 | static const struct apu_led_profile apu1_led_profile[] = { | 
 | 	{ "apu:green:1", LED_ON,  APU1_FCH_GPIO_BASE + 0 * APU1_IOSIZE }, | 
 | 	{ "apu:green:2", LED_OFF, APU1_FCH_GPIO_BASE + 1 * APU1_IOSIZE }, | 
 | 	{ "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE }, | 
 | }; | 
 |  | 
 | static const struct apu_led_profile apu2_led_profile[] = { | 
 | 	{ "apu2:green:1", LED_ON,  APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE }, | 
 | 	{ "apu2:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE }, | 
 | 	{ "apu2:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE }, | 
 | }; | 
 |  | 
 | /* Same as apu2_led_profile, but with "3" in the LED names. */ | 
 | static const struct apu_led_profile apu3_led_profile[] = { | 
 | 	{ "apu3:green:1", LED_ON,  APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE }, | 
 | 	{ "apu3:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE }, | 
 | 	{ "apu3:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE }, | 
 | }; | 
 |  | 
 | static const struct dmi_system_id apu_led_dmi_table[] __initconst = { | 
 | 	{ | 
 | 		.ident = "apu", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "APU") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU2 with "Legacy" bios < 4.0.8 */ | 
 | 	{ | 
 | 		.ident = "apu2", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "APU2") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU2 with "Legacy" bios >= 4.0.8 */ | 
 | 	{ | 
 | 		.ident = "apu2", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "apu2") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU2 with "Mainline" bios */ | 
 | 	{ | 
 | 		.ident = "apu2", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU3 with "Legacy" bios < 4.0.8 */ | 
 | 	{ | 
 | 		.ident = "apu3", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "APU3") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU3 with "Legacy" bios >= 4.0.8 */ | 
 | 	{ | 
 | 		.ident = "apu3", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "apu3") | 
 | 		} | 
 | 	}, | 
 | 	/* PC Engines APU2 with "Mainline" bios */ | 
 | 	{ | 
 | 		.ident = "apu3", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3") | 
 | 		} | 
 | 	}, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table); | 
 |  | 
 | static void apu1_led_brightness_set(struct led_classdev *led, enum led_brightness value) | 
 | { | 
 | 	struct apu_led_priv *pled = cdev_to_priv(led); | 
 |  | 
 | 	spin_lock(&apu_led->lock); | 
 | 	iowrite8(value ? APU1_LEDON : APU1_LEDOFF, pled->param.addr); | 
 | 	spin_unlock(&apu_led->lock); | 
 | } | 
 |  | 
 | static void apu2_led_brightness_set(struct led_classdev *led, enum led_brightness value) | 
 | { | 
 | 	struct apu_led_priv *pled = cdev_to_priv(led); | 
 | 	u32 value_new; | 
 |  | 
 | 	spin_lock(&apu_led->lock); | 
 |  | 
 | 	value_new = ioread32(pled->param.addr); | 
 |  | 
 | 	if (value) | 
 | 		value_new &= ~BIT(APU2_GPIO_BIT_WRITE); | 
 | 	else | 
 | 		value_new |= BIT(APU2_GPIO_BIT_WRITE); | 
 |  | 
 | 	iowrite32(value_new, pled->param.addr); | 
 |  | 
 | 	spin_unlock(&apu_led->lock); | 
 | } | 
 |  | 
 | static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld) | 
 | { | 
 | 	int i; | 
 | 	int err; | 
 |  | 
 | 	apu_led->pled = devm_kcalloc(dev, | 
 | 		apu_led->num_led_instances, sizeof(struct apu_led_priv), | 
 | 		GFP_KERNEL); | 
 |  | 
 | 	if (!apu_led->pled) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (i = 0; i < apu_led->num_led_instances; i++) { | 
 | 		struct apu_led_priv *pled = &apu_led->pled[i]; | 
 | 		struct led_classdev *led_cdev = &pled->cdev; | 
 |  | 
 | 		led_cdev->name = apu_led->profile[i].name; | 
 | 		led_cdev->brightness = apu_led->profile[i].brightness; | 
 | 		led_cdev->max_brightness = 1; | 
 | 		led_cdev->flags = LED_CORE_SUSPENDRESUME; | 
 | 		if (apu_led->platform == APU1_LED_PLATFORM) | 
 | 			led_cdev->brightness_set = apu1_led_brightness_set; | 
 | 		else if (apu_led->platform == APU2_LED_PLATFORM) | 
 | 			led_cdev->brightness_set = apu2_led_brightness_set; | 
 |  | 
 | 		pled->param.addr = devm_ioremap(dev, | 
 | 				apu_led->profile[i].offset, apu_led->iosize); | 
 | 		if (!pled->param.addr) { | 
 | 			err = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 |  | 
 | 		err = led_classdev_register(dev, led_cdev); | 
 | 		if (err) | 
 | 			goto error; | 
 |  | 
 | 		led_cdev->brightness_set(led_cdev, apu_led->profile[i].brightness); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | error: | 
 | 	while (i-- > 0) | 
 | 		led_classdev_unregister(&apu_led->pled[i].cdev); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __init apu_led_probe(struct platform_device *pdev) | 
 | { | 
 | 	apu_led = devm_kzalloc(&pdev->dev, sizeof(*apu_led), GFP_KERNEL); | 
 |  | 
 | 	if (!apu_led) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	apu_led->pdev = pdev; | 
 |  | 
 | 	if (dmi_match(DMI_PRODUCT_NAME, "APU")) { | 
 | 		apu_led->profile = apu1_led_profile; | 
 | 		apu_led->platform = APU1_LED_PLATFORM; | 
 | 		apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile); | 
 | 		apu_led->iosize = APU1_IOSIZE; | 
 | 	} else if (dmi_match(DMI_BOARD_NAME, "APU2") || | 
 | 		   dmi_match(DMI_BOARD_NAME, "apu2") || | 
 | 		   dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) { | 
 | 		apu_led->profile = apu2_led_profile; | 
 | 		apu_led->platform = APU2_LED_PLATFORM; | 
 | 		apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile); | 
 | 		apu_led->iosize = APU2_IOSIZE; | 
 | 	} else if (dmi_match(DMI_BOARD_NAME, "APU3") || | 
 | 		   dmi_match(DMI_BOARD_NAME, "apu3") || | 
 | 		   dmi_match(DMI_BOARD_NAME, "PC Engines apu3")) { | 
 | 		apu_led->profile = apu3_led_profile; | 
 | 		/* Otherwise identical to APU2. */ | 
 | 		apu_led->platform = APU2_LED_PLATFORM; | 
 | 		apu_led->num_led_instances = ARRAY_SIZE(apu3_led_profile); | 
 | 		apu_led->iosize = APU2_IOSIZE; | 
 | 	} | 
 |  | 
 | 	spin_lock_init(&apu_led->lock); | 
 | 	return apu_led_config(&pdev->dev, apu_led); | 
 | } | 
 |  | 
 | static struct platform_driver apu_led_driver = { | 
 | 	.driver = { | 
 | 		.name = KBUILD_MODNAME, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init apu_led_init(void) | 
 | { | 
 | 	struct platform_device *pdev; | 
 | 	int err; | 
 |  | 
 | 	if (!dmi_match(DMI_SYS_VENDOR, "PC Engines")) { | 
 | 		pr_err("No PC Engines board detected\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	if (!(dmi_match(DMI_PRODUCT_NAME, "APU") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "APU2") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "apu2") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "APU3") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "apu3") || | 
 | 	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) { | 
 | 		pr_err("Unknown PC Engines board: %s\n", | 
 | 				dmi_get_system_info(DMI_PRODUCT_NAME)); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); | 
 | 	if (IS_ERR(pdev)) { | 
 | 		pr_err("Device allocation failed\n"); | 
 | 		return PTR_ERR(pdev); | 
 | 	} | 
 |  | 
 | 	err = platform_driver_probe(&apu_led_driver, apu_led_probe); | 
 | 	if (err) { | 
 | 		pr_err("Probe platform driver failed\n"); | 
 | 		platform_device_unregister(pdev); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static void __exit apu_led_exit(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < apu_led->num_led_instances; i++) | 
 | 		led_classdev_unregister(&apu_led->pled[i].cdev); | 
 |  | 
 | 	platform_device_unregister(apu_led->pdev); | 
 | 	platform_driver_unregister(&apu_led_driver); | 
 | } | 
 |  | 
 | module_init(apu_led_init); | 
 | module_exit(apu_led_exit); | 
 |  | 
 | MODULE_AUTHOR("Alan Mizrahi"); | 
 | MODULE_DESCRIPTION("PC Engines APU family LED driver"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_ALIAS("platform:leds_apu"); |