| /* | 
 |  * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. | 
 |  *		Amiga MacroSystemUS WarpEngine SCSI controller. | 
 |  *		Amiga Technologies/DKB A4091 SCSI controller. | 
 |  * | 
 |  * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> | 
 |  * plus modifications of the 53c7xx.c driver to support the Amiga. | 
 |  * | 
 |  * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org> | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/zorro.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <asm/amigahw.h> | 
 | #include <asm/amigaints.h> | 
 |  | 
 | #include <scsi/scsi_host.h> | 
 | #include <scsi/scsi_transport_spi.h> | 
 |  | 
 | #include "53c700.h" | 
 |  | 
 | MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>"); | 
 | MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 |  | 
 | static struct scsi_host_template zorro7xx_scsi_driver_template = { | 
 | 	.proc_name	= "zorro7xx", | 
 | 	.this_id	= 7, | 
 | 	.module		= THIS_MODULE, | 
 | }; | 
 |  | 
 | static struct zorro_driver_data { | 
 | 	const char *name; | 
 | 	unsigned long offset; | 
 | 	int absolute;	/* offset is absolute address */ | 
 | } zorro7xx_driver_data[] = { | 
 | 	{ .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 }, | 
 | 	{ .name = "WarpEngine 40xx", .offset = 0x40000 }, | 
 | 	{ .name = "A4091", .offset = 0x800000 }, | 
 | 	{ .name = "GForce 040/060", .offset = 0x40000 }, | 
 | 	{ 0 } | 
 | }; | 
 |  | 
 | static struct zorro_device_id zorro7xx_zorro_tbl[] = { | 
 | 	{ | 
 | 		.id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, | 
 | 		.driver_data = (unsigned long)&zorro7xx_driver_data[0], | 
 | 	}, | 
 | 	{ | 
 | 		.id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, | 
 | 		.driver_data = (unsigned long)&zorro7xx_driver_data[1], | 
 | 	}, | 
 | 	{ | 
 | 		.id = ZORRO_PROD_CBM_A4091_1, | 
 | 		.driver_data = (unsigned long)&zorro7xx_driver_data[2], | 
 | 	}, | 
 | 	{ | 
 | 		.id = ZORRO_PROD_CBM_A4091_2, | 
 | 		.driver_data = (unsigned long)&zorro7xx_driver_data[2], | 
 | 	}, | 
 | 	{ | 
 | 		.id = ZORRO_PROD_GVP_GFORCE_040_060, | 
 | 		.driver_data = (unsigned long)&zorro7xx_driver_data[3], | 
 | 	}, | 
 | 	{ 0 } | 
 | }; | 
 | MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl); | 
 |  | 
 | static int zorro7xx_init_one(struct zorro_dev *z, | 
 | 			     const struct zorro_device_id *ent) | 
 | { | 
 | 	struct Scsi_Host *host; | 
 | 	struct NCR_700_Host_Parameters *hostdata; | 
 | 	struct zorro_driver_data *zdd; | 
 | 	unsigned long board, ioaddr; | 
 |  | 
 | 	board = zorro_resource_start(z); | 
 | 	zdd = (struct zorro_driver_data *)ent->driver_data; | 
 |  | 
 | 	if (zdd->absolute) { | 
 | 		ioaddr = zdd->offset; | 
 | 	} else { | 
 | 		ioaddr = board + zdd->offset; | 
 | 	} | 
 |  | 
 | 	if (!zorro_request_device(z, zdd->name)) { | 
 | 		printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n", | 
 | 		       board); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL); | 
 | 	if (!hostdata) { | 
 | 		printk(KERN_ERR "zorro7xx: Failed to allocate host data\n"); | 
 | 		goto out_release; | 
 | 	} | 
 |  | 
 | 	/* Fill in the required pieces of hostdata */ | 
 | 	if (ioaddr > 0x01000000) | 
 | 		hostdata->base = ioremap(ioaddr, zorro_resource_len(z)); | 
 | 	else | 
 | 		hostdata->base = ZTWO_VADDR(ioaddr); | 
 |  | 
 | 	hostdata->clock = 50; | 
 | 	hostdata->chip710 = 1; | 
 |  | 
 | 	/* Settings for at least WarpEngine 40xx */ | 
 | 	hostdata->ctest7_extra = CTEST7_TT1; | 
 |  | 
 | 	zorro7xx_scsi_driver_template.name = zdd->name; | 
 |  | 
 | 	/* and register the chip */ | 
 | 	host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata, | 
 | 			      &z->dev); | 
 | 	if (!host) { | 
 | 		printk(KERN_ERR "zorro7xx: No host detected; " | 
 | 				"board configuration problem?\n"); | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	host->this_id = 7; | 
 | 	host->base = ioaddr; | 
 | 	host->irq = IRQ_AMIGA_PORTS; | 
 |  | 
 | 	if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi", | 
 | 			host)) { | 
 | 		printk(KERN_ERR "zorro7xx: request_irq failed\n"); | 
 | 		goto out_put_host; | 
 | 	} | 
 |  | 
 | 	zorro_set_drvdata(z, host); | 
 | 	scsi_scan_host(host); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  out_put_host: | 
 | 	scsi_host_put(host); | 
 |  out_free: | 
 | 	if (ioaddr > 0x01000000) | 
 | 		iounmap(hostdata->base); | 
 | 	kfree(hostdata); | 
 |  out_release: | 
 | 	zorro_release_device(z); | 
 |  | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | static void zorro7xx_remove_one(struct zorro_dev *z) | 
 | { | 
 | 	struct Scsi_Host *host = zorro_get_drvdata(z); | 
 | 	struct NCR_700_Host_Parameters *hostdata = shost_priv(host); | 
 |  | 
 | 	scsi_remove_host(host); | 
 |  | 
 | 	NCR_700_release(host); | 
 | 	kfree(hostdata); | 
 | 	free_irq(host->irq, host); | 
 | 	zorro_release_device(z); | 
 | } | 
 |  | 
 | static struct zorro_driver zorro7xx_driver = { | 
 | 	.name	  = "zorro7xx-scsi", | 
 | 	.id_table = zorro7xx_zorro_tbl, | 
 | 	.probe	  = zorro7xx_init_one, | 
 | 	.remove	  = zorro7xx_remove_one, | 
 | }; | 
 |  | 
 | static int __init zorro7xx_scsi_init(void) | 
 | { | 
 | 	return zorro_register_driver(&zorro7xx_driver); | 
 | } | 
 |  | 
 | static void __exit zorro7xx_scsi_exit(void) | 
 | { | 
 | 	zorro_unregister_driver(&zorro7xx_driver); | 
 | } | 
 |  | 
 | module_init(zorro7xx_scsi_init); | 
 | module_exit(zorro7xx_scsi_exit); |