|  | /* | 
|  | * Copyright (C) 2015 Hisilicon Limited, All Rights Reserved. | 
|  | * Author: Jun Ma <majun258@huawei.com> | 
|  | * Author: Yun Wu <wuyun.wu@huawei.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irqchip.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/msi.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | /* Interrupt numbers per mbigen node supported */ | 
|  | #define IRQS_PER_MBIGEN_NODE		128 | 
|  |  | 
|  | /* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */ | 
|  | #define RESERVED_IRQ_PER_MBIGEN_CHIP	64 | 
|  |  | 
|  | /* The maximum IRQ pin number of mbigen chip(start from 0) */ | 
|  | #define MAXIMUM_IRQ_PIN_NUM		1407 | 
|  |  | 
|  | /** | 
|  | * In mbigen vector register | 
|  | * bit[21:12]:	event id value | 
|  | * bit[11:0]:	device id | 
|  | */ | 
|  | #define IRQ_EVENT_ID_SHIFT		12 | 
|  | #define IRQ_EVENT_ID_MASK		0x3ff | 
|  |  | 
|  | /* register range of each mbigen node */ | 
|  | #define MBIGEN_NODE_OFFSET		0x1000 | 
|  |  | 
|  | /* offset of vector register in mbigen node */ | 
|  | #define REG_MBIGEN_VEC_OFFSET		0x200 | 
|  |  | 
|  | /** | 
|  | * offset of clear register in mbigen node | 
|  | * This register is used to clear the status | 
|  | * of interrupt | 
|  | */ | 
|  | #define REG_MBIGEN_CLEAR_OFFSET		0xa000 | 
|  |  | 
|  | /** | 
|  | * offset of interrupt type register | 
|  | * This register is used to configure interrupt | 
|  | * trigger type | 
|  | */ | 
|  | #define REG_MBIGEN_TYPE_OFFSET		0x0 | 
|  |  | 
|  | /** | 
|  | * struct mbigen_device - holds the information of mbigen device. | 
|  | * | 
|  | * @pdev:		pointer to the platform device structure of mbigen chip. | 
|  | * @base:		mapped address of this mbigen chip. | 
|  | */ | 
|  | struct mbigen_device { | 
|  | struct platform_device	*pdev; | 
|  | void __iomem		*base; | 
|  | }; | 
|  |  | 
|  | static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) | 
|  | { | 
|  | unsigned int nid, pin; | 
|  |  | 
|  | hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; | 
|  | nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; | 
|  | pin = hwirq % IRQS_PER_MBIGEN_NODE; | 
|  |  | 
|  | return pin * 4 + nid * MBIGEN_NODE_OFFSET | 
|  | + REG_MBIGEN_VEC_OFFSET; | 
|  | } | 
|  |  | 
|  | static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, | 
|  | u32 *mask, u32 *addr) | 
|  | { | 
|  | unsigned int nid, irq_ofst, ofst; | 
|  |  | 
|  | hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; | 
|  | nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; | 
|  | irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE; | 
|  |  | 
|  | *mask = 1 << (irq_ofst % 32); | 
|  | ofst = irq_ofst / 32 * 4; | 
|  |  | 
|  | *addr = ofst + nid * MBIGEN_NODE_OFFSET | 
|  | + REG_MBIGEN_TYPE_OFFSET; | 
|  | } | 
|  |  | 
|  | static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, | 
|  | u32 *mask, u32 *addr) | 
|  | { | 
|  | unsigned int ofst = (hwirq / 32) * 4; | 
|  |  | 
|  | *mask = 1 << (hwirq % 32); | 
|  | *addr = ofst + REG_MBIGEN_CLEAR_OFFSET; | 
|  | } | 
|  |  | 
|  | static void mbigen_eoi_irq(struct irq_data *data) | 
|  | { | 
|  | void __iomem *base = data->chip_data; | 
|  | u32 mask, addr; | 
|  |  | 
|  | get_mbigen_clear_reg(data->hwirq, &mask, &addr); | 
|  |  | 
|  | writel_relaxed(mask, base + addr); | 
|  |  | 
|  | irq_chip_eoi_parent(data); | 
|  | } | 
|  |  | 
|  | static int mbigen_set_type(struct irq_data *data, unsigned int type) | 
|  | { | 
|  | void __iomem *base = data->chip_data; | 
|  | u32 mask, addr, val; | 
|  |  | 
|  | if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) | 
|  | return -EINVAL; | 
|  |  | 
|  | get_mbigen_type_reg(data->hwirq, &mask, &addr); | 
|  |  | 
|  | val = readl_relaxed(base + addr); | 
|  |  | 
|  | if (type == IRQ_TYPE_LEVEL_HIGH) | 
|  | val |= mask; | 
|  | else | 
|  | val &= ~mask; | 
|  |  | 
|  | writel_relaxed(val, base + addr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct irq_chip mbigen_irq_chip = { | 
|  | .name =			"mbigen-v2", | 
|  | .irq_mask =		irq_chip_mask_parent, | 
|  | .irq_unmask =		irq_chip_unmask_parent, | 
|  | .irq_eoi =		mbigen_eoi_irq, | 
|  | .irq_set_type =		mbigen_set_type, | 
|  | .irq_set_affinity =	irq_chip_set_affinity_parent, | 
|  | }; | 
|  |  | 
|  | static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg) | 
|  | { | 
|  | struct irq_data *d = irq_get_irq_data(desc->irq); | 
|  | void __iomem *base = d->chip_data; | 
|  | u32 val; | 
|  |  | 
|  | if (!msg->address_lo && !msg->address_hi) | 
|  | return; | 
|  |  | 
|  | base += get_mbigen_vec_reg(d->hwirq); | 
|  | val = readl_relaxed(base); | 
|  |  | 
|  | val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT); | 
|  | val |= (msg->data << IRQ_EVENT_ID_SHIFT); | 
|  |  | 
|  | /* The address of doorbell is encoded in mbigen register by default | 
|  | * So,we don't need to program the doorbell address at here | 
|  | */ | 
|  | writel_relaxed(val, base); | 
|  | } | 
|  |  | 
|  | static int mbigen_domain_translate(struct irq_domain *d, | 
|  | struct irq_fwspec *fwspec, | 
|  | unsigned long *hwirq, | 
|  | unsigned int *type) | 
|  | { | 
|  | if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) { | 
|  | if (fwspec->param_count != 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || | 
|  | (fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP)) | 
|  | return -EINVAL; | 
|  | else | 
|  | *hwirq = fwspec->param[0]; | 
|  |  | 
|  | /* If there is no valid irq type, just use the default type */ | 
|  | if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) || | 
|  | (fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH)) | 
|  | *type = fwspec->param[1]; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int mbigen_irq_domain_alloc(struct irq_domain *domain, | 
|  | unsigned int virq, | 
|  | unsigned int nr_irqs, | 
|  | void *args) | 
|  | { | 
|  | struct irq_fwspec *fwspec = args; | 
|  | irq_hw_number_t hwirq; | 
|  | unsigned int type; | 
|  | struct mbigen_device *mgn_chip; | 
|  | int i, err; | 
|  |  | 
|  | err = mbigen_domain_translate(domain, fwspec, &hwirq, &type); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = platform_msi_domain_alloc(domain, virq, nr_irqs); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mgn_chip = platform_msi_get_host_data(domain); | 
|  |  | 
|  | for (i = 0; i < nr_irqs; i++) | 
|  | irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, | 
|  | &mbigen_irq_chip, mgn_chip->base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct irq_domain_ops mbigen_domain_ops = { | 
|  | .translate	= mbigen_domain_translate, | 
|  | .alloc		= mbigen_irq_domain_alloc, | 
|  | .free		= irq_domain_free_irqs_common, | 
|  | }; | 
|  |  | 
|  | static int mbigen_of_create_domain(struct platform_device *pdev, | 
|  | struct mbigen_device *mgn_chip) | 
|  | { | 
|  | struct device *parent; | 
|  | struct platform_device *child; | 
|  | struct irq_domain *domain; | 
|  | struct device_node *np; | 
|  | u32 num_pins; | 
|  |  | 
|  | for_each_child_of_node(pdev->dev.of_node, np) { | 
|  | if (!of_property_read_bool(np, "interrupt-controller")) | 
|  | continue; | 
|  |  | 
|  | parent = platform_bus_type.dev_root; | 
|  | child = of_platform_device_create(np, NULL, parent); | 
|  | if (!child) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (of_property_read_u32(child->dev.of_node, "num-pins", | 
|  | &num_pins) < 0) { | 
|  | dev_err(&pdev->dev, "No num-pins property\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | domain = platform_msi_create_device_domain(&child->dev, num_pins, | 
|  | mbigen_write_msg, | 
|  | &mbigen_domain_ops, | 
|  | mgn_chip); | 
|  | if (!domain) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ACPI | 
|  | static int mbigen_acpi_create_domain(struct platform_device *pdev, | 
|  | struct mbigen_device *mgn_chip) | 
|  | { | 
|  | struct irq_domain *domain; | 
|  | u32 num_pins = 0; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * "num-pins" is the total number of interrupt pins implemented in | 
|  | * this mbigen instance, and mbigen is an interrupt controller | 
|  | * connected to ITS  converting wired interrupts into MSI, so we | 
|  | * use "num-pins" to alloc MSI vectors which are needed by client | 
|  | * devices connected to it. | 
|  | * | 
|  | * Here is the DSDT device node used for mbigen in firmware: | 
|  | *	Device(MBI0) { | 
|  | *		Name(_HID, "HISI0152") | 
|  | *		Name(_UID, Zero) | 
|  | *		Name(_CRS, ResourceTemplate() { | 
|  | *			Memory32Fixed(ReadWrite, 0xa0080000, 0x10000) | 
|  | *		}) | 
|  | * | 
|  | *		Name(_DSD, Package () { | 
|  | *			ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), | 
|  | *			Package () { | 
|  | *				Package () {"num-pins", 378} | 
|  | *			} | 
|  | *		}) | 
|  | *	} | 
|  | */ | 
|  | ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins); | 
|  | if (ret || num_pins == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | domain = platform_msi_create_device_domain(&pdev->dev, num_pins, | 
|  | mbigen_write_msg, | 
|  | &mbigen_domain_ops, | 
|  | mgn_chip); | 
|  | if (!domain) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | static inline int mbigen_acpi_create_domain(struct platform_device *pdev, | 
|  | struct mbigen_device *mgn_chip) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int mbigen_device_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct mbigen_device *mgn_chip; | 
|  | struct resource *res; | 
|  | int err; | 
|  |  | 
|  | mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL); | 
|  | if (!mgn_chip) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mgn_chip->pdev = pdev; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) | 
|  | return -EINVAL; | 
|  |  | 
|  | mgn_chip->base = devm_ioremap(&pdev->dev, res->start, | 
|  | resource_size(res)); | 
|  | if (!mgn_chip->base) { | 
|  | dev_err(&pdev->dev, "failed to ioremap %pR\n", res); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) | 
|  | err = mbigen_of_create_domain(pdev, mgn_chip); | 
|  | else if (ACPI_COMPANION(&pdev->dev)) | 
|  | err = mbigen_acpi_create_domain(pdev, mgn_chip); | 
|  | else | 
|  | err = -EINVAL; | 
|  |  | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", | 
|  | mgn_chip->base); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, mgn_chip); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id mbigen_of_match[] = { | 
|  | { .compatible = "hisilicon,mbigen-v2" }, | 
|  | { /* END */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mbigen_of_match); | 
|  |  | 
|  | static const struct acpi_device_id mbigen_acpi_match[] = { | 
|  | { "HISI0152", 0 }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match); | 
|  |  | 
|  | static struct platform_driver mbigen_platform_driver = { | 
|  | .driver = { | 
|  | .name		= "Hisilicon MBIGEN-V2", | 
|  | .of_match_table	= mbigen_of_match, | 
|  | .acpi_match_table = ACPI_PTR(mbigen_acpi_match), | 
|  | }, | 
|  | .probe			= mbigen_device_probe, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(mbigen_platform_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Jun Ma <majun258@huawei.com>"); | 
|  | MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Hisilicon MBI Generator driver"); |