| /* | 
 |  * Texas Instruments TLV320AIC26 low power audio CODEC | 
 |  * ALSA SoC CODEC driver | 
 |  * | 
 |  * Copyright (C) 2008 Secret Lab Technologies Ltd. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/device.h> | 
 | #include <linux/sysfs.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/slab.h> | 
 | #include <sound/core.h> | 
 | #include <sound/pcm.h> | 
 | #include <sound/pcm_params.h> | 
 | #include <sound/soc.h> | 
 | #include <sound/initval.h> | 
 |  | 
 | #include "tlv320aic26.h" | 
 |  | 
 | MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); | 
 | MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* AIC26 driver private data */ | 
 | struct aic26 { | 
 | 	struct spi_device *spi; | 
 | 	struct regmap *regmap; | 
 | 	struct snd_soc_component *component; | 
 | 	int master; | 
 | 	int datfm; | 
 | 	int mclk; | 
 |  | 
 | 	/* Keyclick parameters */ | 
 | 	int keyclick_amplitude; | 
 | 	int keyclick_freq; | 
 | 	int keyclick_len; | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_widget tlv320aic26_dapm_widgets[] = { | 
 | SND_SOC_DAPM_INPUT("MICIN"), | 
 | SND_SOC_DAPM_INPUT("AUX"), | 
 |  | 
 | SND_SOC_DAPM_OUTPUT("HPL"), | 
 | SND_SOC_DAPM_OUTPUT("HPR"), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_route tlv320aic26_dapm_routes[] = { | 
 | 	{ "Capture", NULL, "MICIN" }, | 
 | 	{ "Capture", NULL, "AUX" }, | 
 |  | 
 | 	{ "HPL", NULL, "Playback" }, | 
 | 	{ "HPR", NULL, "Playback" }, | 
 | }; | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * Digital Audio Interface Operations | 
 |  */ | 
 | static int aic26_hw_params(struct snd_pcm_substream *substream, | 
 | 			   struct snd_pcm_hw_params *params, | 
 | 			   struct snd_soc_dai *dai) | 
 | { | 
 | 	struct snd_soc_component *component = dai->component; | 
 | 	struct aic26 *aic26 = snd_soc_component_get_drvdata(component); | 
 | 	int fsref, divisor, wlen, pval, jval, dval, qval; | 
 | 	u16 reg; | 
 |  | 
 | 	dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", | 
 | 		substream, params); | 
 | 	dev_dbg(&aic26->spi->dev, "rate=%i width=%d\n", params_rate(params), | 
 | 		params_width(params)); | 
 |  | 
 | 	switch (params_rate(params)) { | 
 | 	case 8000:  fsref = 48000; divisor = AIC26_DIV_6; break; | 
 | 	case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; | 
 | 	case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; | 
 | 	case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; | 
 | 	case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; | 
 | 	case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; | 
 | 	case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; | 
 | 	case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; | 
 | 	case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; | 
 | 	default: | 
 | 		dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* select data word length */ | 
 | 	switch (params_width(params)) { | 
 | 	case 8:  wlen = AIC26_WLEN_16; break; | 
 | 	case 16: wlen = AIC26_WLEN_16; break; | 
 | 	case 24: wlen = AIC26_WLEN_24; break; | 
 | 	case 32: wlen = AIC26_WLEN_32; break; | 
 | 	default: | 
 | 		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/** | 
 | 	 * Configure PLL | 
 | 	 * fsref = (mclk * PLLM) / 2048 | 
 | 	 * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal) | 
 | 	 */ | 
 | 	pval = 1; | 
 | 	/* compute J portion of multiplier */ | 
 | 	jval = fsref / (aic26->mclk / 2048); | 
 | 	/* compute fractional DDDD component of multiplier */ | 
 | 	dval = fsref - (jval * (aic26->mclk / 2048)); | 
 | 	dval = (10000 * dval) / (aic26->mclk / 2048); | 
 | 	dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval); | 
 | 	qval = 0; | 
 | 	reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; | 
 | 	snd_soc_component_write(component, AIC26_REG_PLL_PROG1, reg); | 
 | 	reg = dval << 2; | 
 | 	snd_soc_component_write(component, AIC26_REG_PLL_PROG2, reg); | 
 |  | 
 | 	/* Audio Control 3 (master mode, fsref rate) */ | 
 | 	if (aic26->master) | 
 | 		reg = 0x0800; | 
 | 	if (fsref == 48000) | 
 | 		reg = 0x2000; | 
 | 	snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL3, 0xf800, reg); | 
 |  | 
 | 	/* Audio Control 1 (FSref divisor) */ | 
 | 	reg = wlen | aic26->datfm | (divisor << 3) | divisor; | 
 | 	snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL1, 0xfff, reg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * aic26_mute - Mute control to reduce noise when changing audio format | 
 |  */ | 
 | static int aic26_mute(struct snd_soc_dai *dai, int mute) | 
 | { | 
 | 	struct snd_soc_component *component = dai->component; | 
 | 	struct aic26 *aic26 = snd_soc_component_get_drvdata(component); | 
 | 	u16 reg; | 
 |  | 
 | 	dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", | 
 | 		dai, mute); | 
 |  | 
 | 	if (mute) | 
 | 		reg = 0x8080; | 
 | 	else | 
 | 		reg = 0; | 
 | 	snd_soc_component_update_bits(component, AIC26_REG_DAC_GAIN, 0x8000, reg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, | 
 | 			    int clk_id, unsigned int freq, int dir) | 
 | { | 
 | 	struct snd_soc_component *component = codec_dai->component; | 
 | 	struct aic26 *aic26 = snd_soc_component_get_drvdata(component); | 
 |  | 
 | 	dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," | 
 | 		" freq=%i, dir=%i)\n", | 
 | 		codec_dai, clk_id, freq, dir); | 
 |  | 
 | 	/* MCLK needs to fall between 2MHz and 50 MHz */ | 
 | 	if ((freq < 2000000) || (freq > 50000000)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	aic26->mclk = freq; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) | 
 | { | 
 | 	struct snd_soc_component *component = codec_dai->component; | 
 | 	struct aic26 *aic26 = snd_soc_component_get_drvdata(component); | 
 |  | 
 | 	dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", | 
 | 		codec_dai, fmt); | 
 |  | 
 | 	/* set master/slave audio interface */ | 
 | 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
 | 	case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; | 
 | 	case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; | 
 | 	default: | 
 | 		dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* interface format */ | 
 | 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
 | 	case SND_SOC_DAIFMT_I2S:     aic26->datfm = AIC26_DATFM_I2S; break; | 
 | 	case SND_SOC_DAIFMT_DSP_A:   aic26->datfm = AIC26_DATFM_DSP; break; | 
 | 	case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; | 
 | 	case SND_SOC_DAIFMT_LEFT_J:  aic26->datfm = AIC26_DATFM_LEFTJ; break; | 
 | 	default: | 
 | 		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * Digital Audio Interface Definition | 
 |  */ | 
 | #define AIC26_RATES	(SNDRV_PCM_RATE_8000  | SNDRV_PCM_RATE_11025 |\ | 
 | 			 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ | 
 | 			 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ | 
 | 			 SNDRV_PCM_RATE_48000) | 
 | #define AIC26_FORMATS	(SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_BE |\ | 
 | 			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) | 
 |  | 
 | static const struct snd_soc_dai_ops aic26_dai_ops = { | 
 | 	.hw_params	= aic26_hw_params, | 
 | 	.digital_mute	= aic26_mute, | 
 | 	.set_sysclk	= aic26_set_sysclk, | 
 | 	.set_fmt	= aic26_set_fmt, | 
 | }; | 
 |  | 
 | static struct snd_soc_dai_driver aic26_dai = { | 
 | 	.name = "tlv320aic26-hifi", | 
 | 	.playback = { | 
 | 		.stream_name = "Playback", | 
 | 		.channels_min = 2, | 
 | 		.channels_max = 2, | 
 | 		.rates = AIC26_RATES, | 
 | 		.formats = AIC26_FORMATS, | 
 | 	}, | 
 | 	.capture = { | 
 | 		.stream_name = "Capture", | 
 | 		.channels_min = 2, | 
 | 		.channels_max = 2, | 
 | 		.rates = AIC26_RATES, | 
 | 		.formats = AIC26_FORMATS, | 
 | 	}, | 
 | 	.ops = &aic26_dai_ops, | 
 | }; | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * ALSA controls | 
 |  */ | 
 | static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; | 
 | static SOC_ENUM_SINGLE_DECL(aic26_capture_src_enum, | 
 | 			    AIC26_REG_AUDIO_CTRL1, 12, | 
 | 			    aic26_capture_src_text); | 
 |  | 
 | static const struct snd_kcontrol_new aic26_snd_controls[] = { | 
 | 	/* Output */ | 
 | 	SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), | 
 | 	SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), | 
 | 	SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), | 
 | 	SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), | 
 | 	SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), | 
 | 	SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), | 
 | 	SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), | 
 | 	SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), | 
 | 	SOC_ENUM("Capture Source", aic26_capture_src_enum), | 
 | }; | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * SPI device portion of driver: sysfs files for debugging | 
 |  */ | 
 |  | 
 | static ssize_t aic26_keyclick_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct aic26 *aic26 = dev_get_drvdata(dev); | 
 | 	int val, amp, freq, len; | 
 |  | 
 | 	val = snd_soc_component_read32(aic26->component, AIC26_REG_AUDIO_CTRL2); | 
 | 	amp = (val >> 12) & 0x7; | 
 | 	freq = (125 << ((val >> 8) & 0x7)) >> 1; | 
 | 	len = 2 * (1 + ((val >> 4) & 0xf)); | 
 |  | 
 | 	return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); | 
 | } | 
 |  | 
 | /* Any write to the keyclick attribute will trigger the keyclick event */ | 
 | static ssize_t aic26_keyclick_set(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *buf, size_t count) | 
 | { | 
 | 	struct aic26 *aic26 = dev_get_drvdata(dev); | 
 |  | 
 | 	snd_soc_component_update_bits(aic26->component, AIC26_REG_AUDIO_CTRL2, | 
 | 			    0x8000, 0x800); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * SoC CODEC portion of driver: probe and release routines | 
 |  */ | 
 | static int aic26_probe(struct snd_soc_component *component) | 
 | { | 
 | 	struct aic26 *aic26 = dev_get_drvdata(component->dev); | 
 | 	int ret, reg; | 
 |  | 
 | 	aic26->component = component; | 
 |  | 
 | 	/* Reset the codec to power on defaults */ | 
 | 	snd_soc_component_write(component, AIC26_REG_RESET, 0xBB00); | 
 |  | 
 | 	/* Power up CODEC */ | 
 | 	snd_soc_component_write(component, AIC26_REG_POWER_CTRL, 0); | 
 |  | 
 | 	/* Audio Control 3 (master mode, fsref rate) */ | 
 | 	reg = snd_soc_component_read32(component, AIC26_REG_AUDIO_CTRL3); | 
 | 	reg &= ~0xf800; | 
 | 	reg |= 0x0800; /* set master mode */ | 
 | 	snd_soc_component_write(component, AIC26_REG_AUDIO_CTRL3, reg); | 
 |  | 
 | 	/* Register the sysfs files for debugging */ | 
 | 	/* Create SysFS files */ | 
 | 	ret = device_create_file(component->dev, &dev_attr_keyclick); | 
 | 	if (ret) | 
 | 		dev_info(component->dev, "error creating sysfs files\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_component_driver aic26_soc_component_dev = { | 
 | 	.probe			= aic26_probe, | 
 | 	.controls		= aic26_snd_controls, | 
 | 	.num_controls		= ARRAY_SIZE(aic26_snd_controls), | 
 | 	.dapm_widgets		= tlv320aic26_dapm_widgets, | 
 | 	.num_dapm_widgets	= ARRAY_SIZE(tlv320aic26_dapm_widgets), | 
 | 	.dapm_routes		= tlv320aic26_dapm_routes, | 
 | 	.num_dapm_routes	= ARRAY_SIZE(tlv320aic26_dapm_routes), | 
 | 	.idle_bias_on		= 1, | 
 | 	.use_pmdown_time	= 1, | 
 | 	.endianness		= 1, | 
 | 	.non_legacy_dai_naming	= 1, | 
 | }; | 
 |  | 
 | static const struct regmap_config aic26_regmap = { | 
 | 	.reg_bits = 16, | 
 | 	.val_bits = 16, | 
 | }; | 
 |  | 
 | /* --------------------------------------------------------------------- | 
 |  * SPI device portion of driver: probe and release routines and SPI | 
 |  * 				 driver registration. | 
 |  */ | 
 | static int aic26_spi_probe(struct spi_device *spi) | 
 | { | 
 | 	struct aic26 *aic26; | 
 | 	int ret; | 
 |  | 
 | 	dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); | 
 |  | 
 | 	/* Allocate driver data */ | 
 | 	aic26 = devm_kzalloc(&spi->dev, sizeof *aic26, GFP_KERNEL); | 
 | 	if (!aic26) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	aic26->regmap = devm_regmap_init_spi(spi, &aic26_regmap); | 
 | 	if (IS_ERR(aic26->regmap)) | 
 | 		return PTR_ERR(aic26->regmap); | 
 |  | 
 | 	/* Initialize the driver data */ | 
 | 	aic26->spi = spi; | 
 | 	dev_set_drvdata(&spi->dev, aic26); | 
 | 	aic26->master = 1; | 
 |  | 
 | 	ret = devm_snd_soc_register_component(&spi->dev, | 
 | 			&aic26_soc_component_dev, &aic26_dai, 1); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct spi_driver aic26_spi = { | 
 | 	.driver = { | 
 | 		.name = "tlv320aic26-codec", | 
 | 	}, | 
 | 	.probe = aic26_spi_probe, | 
 | }; | 
 |  | 
 | module_spi_driver(aic26_spi); |