| /* | 
 |  *  sata_uli.c - ULi Electronics SATA | 
 |  * | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2, or (at your option) | 
 |  *  any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *  GNU General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License | 
 |  *  along with this program; see the file COPYING.  If not, write to | 
 |  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  * | 
 |  *  libata documentation is available via 'make {ps|pdf}docs', | 
 |  *  as Documentation/driver-api/libata.rst | 
 |  * | 
 |  *  Hardware documentation available under NDA. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/gfp.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/device.h> | 
 | #include <scsi/scsi_host.h> | 
 | #include <linux/libata.h> | 
 |  | 
 | #define DRV_NAME	"sata_uli" | 
 | #define DRV_VERSION	"1.3" | 
 |  | 
 | enum { | 
 | 	uli_5289		= 0, | 
 | 	uli_5287		= 1, | 
 | 	uli_5281		= 2, | 
 |  | 
 | 	uli_max_ports		= 4, | 
 |  | 
 | 	/* PCI configuration registers */ | 
 | 	ULI5287_BASE		= 0x90, /* sata0 phy SCR registers */ | 
 | 	ULI5287_OFFS		= 0x10, /* offset from sata0->sata1 phy regs */ | 
 | 	ULI5281_BASE		= 0x60, /* sata0 phy SCR  registers */ | 
 | 	ULI5281_OFFS		= 0x60, /* offset from sata0->sata1 phy regs */ | 
 | }; | 
 |  | 
 | struct uli_priv { | 
 | 	unsigned int		scr_cfg_addr[uli_max_ports]; | 
 | }; | 
 |  | 
 | static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); | 
 | static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); | 
 | static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); | 
 |  | 
 | static const struct pci_device_id uli_pci_tbl[] = { | 
 | 	{ PCI_VDEVICE(AL, 0x5289), uli_5289 }, | 
 | 	{ PCI_VDEVICE(AL, 0x5287), uli_5287 }, | 
 | 	{ PCI_VDEVICE(AL, 0x5281), uli_5281 }, | 
 |  | 
 | 	{ }	/* terminate list */ | 
 | }; | 
 |  | 
 | static struct pci_driver uli_pci_driver = { | 
 | 	.name			= DRV_NAME, | 
 | 	.id_table		= uli_pci_tbl, | 
 | 	.probe			= uli_init_one, | 
 | 	.remove			= ata_pci_remove_one, | 
 | }; | 
 |  | 
 | static struct scsi_host_template uli_sht = { | 
 | 	ATA_BMDMA_SHT(DRV_NAME), | 
 | }; | 
 |  | 
 | static struct ata_port_operations uli_ops = { | 
 | 	.inherits		= &ata_bmdma_port_ops, | 
 | 	.scr_read		= uli_scr_read, | 
 | 	.scr_write		= uli_scr_write, | 
 | 	.hardreset		= ATA_OP_NULL, | 
 | }; | 
 |  | 
 | static const struct ata_port_info uli_port_info = { | 
 | 	.flags		= ATA_FLAG_SATA | ATA_FLAG_IGN_SIMPLEX, | 
 | 	.pio_mask       = ATA_PIO4, | 
 | 	.udma_mask      = ATA_UDMA6, | 
 | 	.port_ops       = &uli_ops, | 
 | }; | 
 |  | 
 |  | 
 | MODULE_AUTHOR("Peer Chen"); | 
 | MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_DEVICE_TABLE(pci, uli_pci_tbl); | 
 | MODULE_VERSION(DRV_VERSION); | 
 |  | 
 | static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) | 
 | { | 
 | 	struct uli_priv *hpriv = ap->host->private_data; | 
 | 	return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); | 
 | } | 
 |  | 
 | static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg) | 
 | { | 
 | 	struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); | 
 | 	unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg); | 
 | 	u32 val; | 
 |  | 
 | 	pci_read_config_dword(pdev, cfg_addr, &val); | 
 | 	return val; | 
 | } | 
 |  | 
 | static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val) | 
 | { | 
 | 	struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); | 
 | 	unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr); | 
 |  | 
 | 	pci_write_config_dword(pdev, cfg_addr, val); | 
 | } | 
 |  | 
 | static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) | 
 | { | 
 | 	if (sc_reg > SCR_CONTROL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	*val = uli_scr_cfg_read(link, sc_reg); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) | 
 | { | 
 | 	if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 | 
 | 		return -EINVAL; | 
 |  | 
 | 	uli_scr_cfg_write(link, sc_reg, val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) | 
 | { | 
 | 	const struct ata_port_info *ppi[] = { &uli_port_info, NULL }; | 
 | 	unsigned int board_idx = (unsigned int) ent->driver_data; | 
 | 	struct ata_host *host; | 
 | 	struct uli_priv *hpriv; | 
 | 	void __iomem * const *iomap; | 
 | 	struct ata_ioports *ioaddr; | 
 | 	int n_ports, rc; | 
 |  | 
 | 	ata_print_version_once(&pdev->dev, DRV_VERSION); | 
 |  | 
 | 	rc = pcim_enable_device(pdev); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	n_ports = 2; | 
 | 	if (board_idx == uli_5287) | 
 | 		n_ports = 4; | 
 |  | 
 | 	/* allocate the host */ | 
 | 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); | 
 | 	if (!host) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); | 
 | 	if (!hpriv) | 
 | 		return -ENOMEM; | 
 | 	host->private_data = hpriv; | 
 |  | 
 | 	/* the first two ports are standard SFF */ | 
 | 	rc = ata_pci_sff_init_host(host); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	ata_pci_bmdma_init(host); | 
 |  | 
 | 	iomap = host->iomap; | 
 |  | 
 | 	switch (board_idx) { | 
 | 	case uli_5287: | 
 | 		/* If there are four, the last two live right after | 
 | 		 * the standard SFF ports. | 
 | 		 */ | 
 | 		hpriv->scr_cfg_addr[0] = ULI5287_BASE; | 
 | 		hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; | 
 |  | 
 | 		ioaddr = &host->ports[2]->ioaddr; | 
 | 		ioaddr->cmd_addr = iomap[0] + 8; | 
 | 		ioaddr->altstatus_addr = | 
 | 		ioaddr->ctl_addr = (void __iomem *) | 
 | 			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4; | 
 | 		ioaddr->bmdma_addr = iomap[4] + 16; | 
 | 		hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; | 
 | 		ata_sff_std_ports(ioaddr); | 
 |  | 
 | 		ata_port_desc(host->ports[2], | 
 | 			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx", | 
 | 			(unsigned long long)pci_resource_start(pdev, 0) + 8, | 
 | 			((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, | 
 | 			(unsigned long long)pci_resource_start(pdev, 4) + 16); | 
 |  | 
 | 		ioaddr = &host->ports[3]->ioaddr; | 
 | 		ioaddr->cmd_addr = iomap[2] + 8; | 
 | 		ioaddr->altstatus_addr = | 
 | 		ioaddr->ctl_addr = (void __iomem *) | 
 | 			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4; | 
 | 		ioaddr->bmdma_addr = iomap[4] + 24; | 
 | 		hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; | 
 | 		ata_sff_std_ports(ioaddr); | 
 |  | 
 | 		ata_port_desc(host->ports[2], | 
 | 			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx", | 
 | 			(unsigned long long)pci_resource_start(pdev, 2) + 9, | 
 | 			((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, | 
 | 			(unsigned long long)pci_resource_start(pdev, 4) + 24); | 
 |  | 
 | 		break; | 
 |  | 
 | 	case uli_5289: | 
 | 		hpriv->scr_cfg_addr[0] = ULI5287_BASE; | 
 | 		hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; | 
 | 		break; | 
 |  | 
 | 	case uli_5281: | 
 | 		hpriv->scr_cfg_addr[0] = ULI5281_BASE; | 
 | 		hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		BUG(); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 | 	pci_intx(pdev, 1); | 
 | 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, | 
 | 				 IRQF_SHARED, &uli_sht); | 
 | } | 
 |  | 
 | module_pci_driver(uli_pci_driver); |