| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * twl6040-vibra.c - TWL6040 Vibrator driver | 
 | 3 |  * | 
 | 4 |  * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com> | 
 | 5 |  * Author:      Misael Lopez Cruz <misael.lopez@ti.com> | 
 | 6 |  * | 
 | 7 |  * Copyright:   (C) 2011 Texas Instruments, Inc. | 
 | 8 |  * | 
 | 9 |  * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com> | 
 | 10 |  *				Felipe Balbi <felipe.balbi@nokia.com> | 
 | 11 |  *				Jari Vanhala <ext-javi.vanhala@nokia.com> | 
 | 12 |  * | 
 | 13 |  * This program is free software; you can redistribute it and/or modify | 
 | 14 |  * it under the terms of the GNU General Public License version 2 as | 
 | 15 |  * published by the Free Software Foundation. | 
 | 16 |  * | 
 | 17 |  * This program is distributed in the hope that it will be useful, but | 
 | 18 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 19 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 | 20 |  * General Public License for more details. | 
 | 21 |  * | 
 | 22 |  * You should have received a copy of the GNU General Public License | 
 | 23 |  * along with this program; if not, write to the Free Software | 
 | 24 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 | 25 |  * 02110-1301 USA | 
 | 26 |  * | 
 | 27 |  */ | 
 | 28 | #include <linux/module.h> | 
 | 29 | #include <linux/platform_device.h> | 
 | 30 | #include <linux/of.h> | 
 | 31 | #include <linux/workqueue.h> | 
 | 32 | #include <linux/input.h> | 
 | 33 | #include <linux/mfd/twl6040.h> | 
 | 34 | #include <linux/slab.h> | 
 | 35 | #include <linux/delay.h> | 
 | 36 | #include <linux/regulator/consumer.h> | 
 | 37 |  | 
 | 38 | #define EFFECT_DIR_180_DEG	0x8000 | 
 | 39 |  | 
 | 40 | /* Recommended modulation index 85% */ | 
 | 41 | #define TWL6040_VIBRA_MOD	85 | 
 | 42 |  | 
 | 43 | #define TWL6040_NUM_SUPPLIES 2 | 
 | 44 |  | 
 | 45 | struct vibra_info { | 
 | 46 | 	struct device *dev; | 
 | 47 | 	struct input_dev *input_dev; | 
 | 48 | 	struct work_struct play_work; | 
 | 49 |  | 
 | 50 | 	int irq; | 
 | 51 |  | 
 | 52 | 	bool enabled; | 
 | 53 | 	int weak_speed; | 
 | 54 | 	int strong_speed; | 
 | 55 | 	int direction; | 
 | 56 |  | 
 | 57 | 	unsigned int vibldrv_res; | 
 | 58 | 	unsigned int vibrdrv_res; | 
 | 59 | 	unsigned int viblmotor_res; | 
 | 60 | 	unsigned int vibrmotor_res; | 
 | 61 |  | 
 | 62 | 	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES]; | 
 | 63 |  | 
 | 64 | 	struct twl6040 *twl6040; | 
 | 65 | }; | 
 | 66 |  | 
 | 67 | static irqreturn_t twl6040_vib_irq_handler(int irq, void *data) | 
 | 68 | { | 
 | 69 | 	struct vibra_info *info = data; | 
 | 70 | 	struct twl6040 *twl6040 = info->twl6040; | 
 | 71 | 	u8 status; | 
 | 72 |  | 
 | 73 | 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); | 
 | 74 | 	if (status & TWL6040_VIBLOCDET) { | 
 | 75 | 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n"); | 
 | 76 | 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL, | 
 | 77 | 				   TWL6040_VIBENA); | 
 | 78 | 	} | 
 | 79 | 	if (status & TWL6040_VIBROCDET) { | 
 | 80 | 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n"); | 
 | 81 | 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR, | 
 | 82 | 				   TWL6040_VIBENA); | 
 | 83 | 	} | 
 | 84 |  | 
 | 85 | 	return IRQ_HANDLED; | 
 | 86 | } | 
 | 87 |  | 
 | 88 | static void twl6040_vibra_enable(struct vibra_info *info) | 
 | 89 | { | 
 | 90 | 	struct twl6040 *twl6040 = info->twl6040; | 
 | 91 | 	int ret; | 
 | 92 |  | 
 | 93 | 	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies); | 
 | 94 | 	if (ret) { | 
 | 95 | 		dev_err(info->dev, "failed to enable regulators %d\n", ret); | 
 | 96 | 		return; | 
 | 97 | 	} | 
 | 98 |  | 
 | 99 | 	twl6040_power(info->twl6040, 1); | 
 | 100 | 	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) { | 
 | 101 | 		/* | 
 | 102 | 		 * ERRATA: Disable overcurrent protection for at least | 
 | 103 | 		 * 3ms when enabling vibrator drivers to avoid false | 
 | 104 | 		 * overcurrent detection | 
 | 105 | 		 */ | 
 | 106 | 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | 
 | 107 | 				  TWL6040_VIBENA | TWL6040_VIBCTRL); | 
 | 108 | 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | 
 | 109 | 				  TWL6040_VIBENA | TWL6040_VIBCTRL); | 
 | 110 | 		usleep_range(3000, 3500); | 
 | 111 | 	} | 
 | 112 |  | 
 | 113 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, | 
 | 114 | 			  TWL6040_VIBENA); | 
 | 115 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, | 
 | 116 | 			  TWL6040_VIBENA); | 
 | 117 |  | 
 | 118 | 	info->enabled = true; | 
 | 119 | } | 
 | 120 |  | 
 | 121 | static void twl6040_vibra_disable(struct vibra_info *info) | 
 | 122 | { | 
 | 123 | 	struct twl6040 *twl6040 = info->twl6040; | 
 | 124 |  | 
 | 125 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00); | 
 | 126 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00); | 
 | 127 | 	twl6040_power(info->twl6040, 0); | 
 | 128 |  | 
 | 129 | 	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies); | 
 | 130 |  | 
 | 131 | 	info->enabled = false; | 
 | 132 | } | 
 | 133 |  | 
 | 134 | static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res, | 
 | 135 | 			     int speed, int direction) | 
 | 136 | { | 
 | 137 | 	int vpk, max_code; | 
 | 138 | 	u8 vibdat; | 
 | 139 |  | 
 | 140 | 	/* output swing */ | 
 | 141 | 	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) / | 
 | 142 | 		(100 * (vibdrv_res + motor_res)); | 
 | 143 |  | 
 | 144 | 	/* 50mV per VIBDAT code step */ | 
 | 145 | 	max_code = vpk / 50; | 
 | 146 | 	if (max_code > TWL6040_VIBDAT_MAX) | 
 | 147 | 		max_code = TWL6040_VIBDAT_MAX; | 
 | 148 |  | 
 | 149 | 	/* scale speed to max allowed code */ | 
 | 150 | 	vibdat = (u8)((speed * max_code) / USHRT_MAX); | 
 | 151 |  | 
 | 152 | 	/* 2's complement for direction > 180 degrees */ | 
 | 153 | 	vibdat *= direction; | 
 | 154 |  | 
 | 155 | 	return vibdat; | 
 | 156 | } | 
 | 157 |  | 
 | 158 | static void twl6040_vibra_set_effect(struct vibra_info *info) | 
 | 159 | { | 
 | 160 | 	struct twl6040 *twl6040 = info->twl6040; | 
 | 161 | 	u8 vibdatl, vibdatr; | 
 | 162 | 	int volt; | 
 | 163 |  | 
 | 164 | 	/* weak motor */ | 
 | 165 | 	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000; | 
 | 166 | 	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res, | 
 | 167 | 				     info->viblmotor_res, | 
 | 168 | 				     info->weak_speed, info->direction); | 
 | 169 |  | 
 | 170 | 	/* strong motor */ | 
 | 171 | 	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000; | 
 | 172 | 	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res, | 
 | 173 | 				     info->vibrmotor_res, | 
 | 174 | 				     info->strong_speed, info->direction); | 
 | 175 |  | 
 | 176 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl); | 
 | 177 | 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr); | 
 | 178 | } | 
 | 179 |  | 
 | 180 | static void vibra_play_work(struct work_struct *work) | 
 | 181 | { | 
 | 182 | 	struct vibra_info *info = container_of(work, | 
 | 183 | 				struct vibra_info, play_work); | 
 | 184 | 	int ret; | 
 | 185 |  | 
 | 186 | 	/* Do not allow effect, while the routing is set to use audio */ | 
 | 187 | 	ret = twl6040_get_vibralr_status(info->twl6040); | 
 | 188 | 	if (ret & TWL6040_VIBSEL) { | 
 | 189 | 		dev_info(info->dev, "Vibra is configured for audio\n"); | 
 | 190 | 		return; | 
 | 191 | 	} | 
 | 192 |  | 
 | 193 | 	if (info->weak_speed || info->strong_speed) { | 
 | 194 | 		if (!info->enabled) | 
 | 195 | 			twl6040_vibra_enable(info); | 
 | 196 |  | 
 | 197 | 		twl6040_vibra_set_effect(info); | 
 | 198 | 	} else if (info->enabled) | 
 | 199 | 		twl6040_vibra_disable(info); | 
 | 200 |  | 
 | 201 | } | 
 | 202 |  | 
 | 203 | static int vibra_play(struct input_dev *input, void *data, | 
 | 204 | 		      struct ff_effect *effect) | 
 | 205 | { | 
 | 206 | 	struct vibra_info *info = input_get_drvdata(input); | 
 | 207 |  | 
 | 208 | 	info->weak_speed = effect->u.rumble.weak_magnitude; | 
 | 209 | 	info->strong_speed = effect->u.rumble.strong_magnitude; | 
 | 210 | 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; | 
 | 211 |  | 
 | 212 | 	schedule_work(&info->play_work); | 
 | 213 |  | 
 | 214 | 	return 0; | 
 | 215 | } | 
 | 216 |  | 
 | 217 | static void twl6040_vibra_close(struct input_dev *input) | 
 | 218 | { | 
 | 219 | 	struct vibra_info *info = input_get_drvdata(input); | 
 | 220 |  | 
 | 221 | 	cancel_work_sync(&info->play_work); | 
 | 222 |  | 
 | 223 | 	if (info->enabled) | 
 | 224 | 		twl6040_vibra_disable(info); | 
 | 225 | } | 
 | 226 |  | 
 | 227 | static int __maybe_unused twl6040_vibra_suspend(struct device *dev) | 
 | 228 | { | 
 | 229 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 230 | 	struct vibra_info *info = platform_get_drvdata(pdev); | 
 | 231 |  | 
 | 232 | 	cancel_work_sync(&info->play_work); | 
 | 233 |  | 
 | 234 | 	if (info->enabled) | 
 | 235 | 		twl6040_vibra_disable(info); | 
 | 236 |  | 
 | 237 | 	return 0; | 
 | 238 | } | 
 | 239 |  | 
 | 240 | static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); | 
 | 241 |  | 
 | 242 | static int twl6040_vibra_probe(struct platform_device *pdev) | 
 | 243 | { | 
 | 244 | 	struct device *twl6040_core_dev = pdev->dev.parent; | 
 | 245 | 	struct device_node *twl6040_core_node; | 
 | 246 | 	struct vibra_info *info; | 
 | 247 | 	int vddvibl_uV = 0; | 
 | 248 | 	int vddvibr_uV = 0; | 
 | 249 | 	int error; | 
 | 250 |  | 
 | 251 | 	twl6040_core_node = of_get_child_by_name(twl6040_core_dev->of_node, | 
 | 252 | 						 "vibra"); | 
 | 253 | 	if (!twl6040_core_node) { | 
 | 254 | 		dev_err(&pdev->dev, "parent of node is missing?\n"); | 
 | 255 | 		return -EINVAL; | 
 | 256 | 	} | 
 | 257 |  | 
 | 258 | 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | 
 | 259 | 	if (!info) { | 
 | 260 | 		of_node_put(twl6040_core_node); | 
 | 261 | 		dev_err(&pdev->dev, "couldn't allocate memory\n"); | 
 | 262 | 		return -ENOMEM; | 
 | 263 | 	} | 
 | 264 |  | 
 | 265 | 	info->dev = &pdev->dev; | 
 | 266 |  | 
 | 267 | 	info->twl6040 = dev_get_drvdata(pdev->dev.parent); | 
 | 268 |  | 
 | 269 | 	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res", | 
 | 270 | 			     &info->vibldrv_res); | 
 | 271 | 	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res", | 
 | 272 | 			     &info->vibrdrv_res); | 
 | 273 | 	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res", | 
 | 274 | 			     &info->viblmotor_res); | 
 | 275 | 	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res", | 
 | 276 | 			     &info->vibrmotor_res); | 
 | 277 | 	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV); | 
 | 278 | 	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV); | 
 | 279 |  | 
 | 280 | 	of_node_put(twl6040_core_node); | 
 | 281 |  | 
 | 282 | 	if ((!info->vibldrv_res && !info->viblmotor_res) || | 
 | 283 | 	    (!info->vibrdrv_res && !info->vibrmotor_res)) { | 
 | 284 | 		dev_err(info->dev, "invalid vibra driver/motor resistance\n"); | 
 | 285 | 		return -EINVAL; | 
 | 286 | 	} | 
 | 287 |  | 
 | 288 | 	info->irq = platform_get_irq(pdev, 0); | 
 | 289 | 	if (info->irq < 0) { | 
 | 290 | 		dev_err(info->dev, "invalid irq\n"); | 
 | 291 | 		return -EINVAL; | 
 | 292 | 	} | 
 | 293 |  | 
 | 294 | 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, | 
 | 295 | 					  twl6040_vib_irq_handler, | 
 | 296 | 					  IRQF_ONESHOT, | 
 | 297 | 					  "twl6040_irq_vib", info); | 
 | 298 | 	if (error) { | 
 | 299 | 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error); | 
 | 300 | 		return error; | 
 | 301 | 	} | 
 | 302 |  | 
 | 303 | 	info->supplies[0].supply = "vddvibl"; | 
 | 304 | 	info->supplies[1].supply = "vddvibr"; | 
 | 305 | 	/* | 
 | 306 | 	 * When booted with Device tree the regulators are attached to the | 
 | 307 | 	 * parent device (twl6040 MFD core) | 
 | 308 | 	 */ | 
 | 309 | 	error = devm_regulator_bulk_get(twl6040_core_dev, | 
 | 310 | 					ARRAY_SIZE(info->supplies), | 
 | 311 | 					info->supplies); | 
 | 312 | 	if (error) { | 
 | 313 | 		dev_err(info->dev, "couldn't get regulators %d\n", error); | 
 | 314 | 		return error; | 
 | 315 | 	} | 
 | 316 |  | 
 | 317 | 	if (vddvibl_uV) { | 
 | 318 | 		error = regulator_set_voltage(info->supplies[0].consumer, | 
 | 319 | 					      vddvibl_uV, vddvibl_uV); | 
 | 320 | 		if (error) { | 
 | 321 | 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n", | 
 | 322 | 				error); | 
 | 323 | 			return error; | 
 | 324 | 		} | 
 | 325 | 	} | 
 | 326 |  | 
 | 327 | 	if (vddvibr_uV) { | 
 | 328 | 		error = regulator_set_voltage(info->supplies[1].consumer, | 
 | 329 | 					      vddvibr_uV, vddvibr_uV); | 
 | 330 | 		if (error) { | 
 | 331 | 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n", | 
 | 332 | 				error); | 
 | 333 | 			return error; | 
 | 334 | 		} | 
 | 335 | 	} | 
 | 336 |  | 
 | 337 | 	INIT_WORK(&info->play_work, vibra_play_work); | 
 | 338 |  | 
 | 339 | 	info->input_dev = devm_input_allocate_device(&pdev->dev); | 
 | 340 | 	if (!info->input_dev) { | 
 | 341 | 		dev_err(info->dev, "couldn't allocate input device\n"); | 
 | 342 | 		return -ENOMEM; | 
 | 343 | 	} | 
 | 344 |  | 
 | 345 | 	input_set_drvdata(info->input_dev, info); | 
 | 346 |  | 
 | 347 | 	info->input_dev->name = "twl6040:vibrator"; | 
 | 348 | 	info->input_dev->id.version = 1; | 
 | 349 | 	info->input_dev->close = twl6040_vibra_close; | 
 | 350 | 	__set_bit(FF_RUMBLE, info->input_dev->ffbit); | 
 | 351 |  | 
 | 352 | 	error = input_ff_create_memless(info->input_dev, NULL, vibra_play); | 
 | 353 | 	if (error) { | 
 | 354 | 		dev_err(info->dev, "couldn't register vibrator to FF\n"); | 
 | 355 | 		return error; | 
 | 356 | 	} | 
 | 357 |  | 
 | 358 | 	error = input_register_device(info->input_dev); | 
 | 359 | 	if (error) { | 
 | 360 | 		dev_err(info->dev, "couldn't register input device\n"); | 
 | 361 | 		return error; | 
 | 362 | 	} | 
 | 363 |  | 
 | 364 | 	platform_set_drvdata(pdev, info); | 
 | 365 |  | 
 | 366 | 	return 0; | 
 | 367 | } | 
 | 368 |  | 
 | 369 | static struct platform_driver twl6040_vibra_driver = { | 
 | 370 | 	.probe		= twl6040_vibra_probe, | 
 | 371 | 	.driver		= { | 
 | 372 | 		.name	= "twl6040-vibra", | 
 | 373 | 		.pm	= &twl6040_vibra_pm_ops, | 
 | 374 | 	}, | 
 | 375 | }; | 
 | 376 | module_platform_driver(twl6040_vibra_driver); | 
 | 377 |  | 
 | 378 | MODULE_ALIAS("platform:twl6040-vibra"); | 
 | 379 | MODULE_DESCRIPTION("TWL6040 Vibra driver"); | 
 | 380 | MODULE_LICENSE("GPL"); | 
 | 381 | MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); | 
 | 382 | MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |