| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 | 
|  | 2 | /* | 
|  | 3 | * ip22-berr.c: Bus error handling. | 
|  | 4 | * | 
|  | 5 | * Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org) | 
|  | 6 | */ | 
|  | 7 |  | 
|  | 8 | #include <linux/init.h> | 
|  | 9 | #include <linux/kernel.h> | 
|  | 10 | #include <linux/sched/signal.h> | 
|  | 11 |  | 
|  | 12 | #include <asm/addrspace.h> | 
|  | 13 | #include <asm/traps.h> | 
|  | 14 | #include <asm/branch.h> | 
|  | 15 | #include <asm/irq_regs.h> | 
|  | 16 | #include <asm/sgi/mc.h> | 
|  | 17 | #include <asm/sgi/hpc3.h> | 
|  | 18 | #include <asm/sgi/ioc.h> | 
|  | 19 | #include <asm/sgi/ip22.h> | 
|  | 20 |  | 
|  | 21 |  | 
|  | 22 | static unsigned int cpu_err_stat;	/* Status reg for CPU */ | 
|  | 23 | static unsigned int gio_err_stat;	/* Status reg for GIO */ | 
|  | 24 | static unsigned int cpu_err_addr;	/* Error address reg for CPU */ | 
|  | 25 | static unsigned int gio_err_addr;	/* Error address reg for GIO */ | 
|  | 26 | static unsigned int extio_stat; | 
|  | 27 | static unsigned int hpc3_berr_stat;	/* Bus error interrupt status */ | 
|  | 28 |  | 
|  | 29 | static void save_and_clear_buserr(void) | 
|  | 30 | { | 
|  | 31 | /* save status registers */ | 
|  | 32 | cpu_err_addr = sgimc->cerr; | 
|  | 33 | cpu_err_stat = sgimc->cstat; | 
|  | 34 | gio_err_addr = sgimc->gerr; | 
|  | 35 | gio_err_stat = sgimc->gstat; | 
|  | 36 | extio_stat = ip22_is_fullhouse() ? sgioc->extio : (sgint->errstat << 4); | 
|  | 37 | hpc3_berr_stat = hpc3c0->bestat; | 
|  | 38 |  | 
|  | 39 | sgimc->cstat = sgimc->gstat = 0; | 
|  | 40 | } | 
|  | 41 |  | 
|  | 42 | #define GIO_ERRMASK	0xff00 | 
|  | 43 | #define CPU_ERRMASK	0x3f00 | 
|  | 44 |  | 
|  | 45 | static void print_buserr(void) | 
|  | 46 | { | 
|  | 47 | if (extio_stat & EXTIO_MC_BUSERR) | 
|  | 48 | printk(KERN_ERR "MC Bus Error\n"); | 
|  | 49 | if (extio_stat & EXTIO_HPC3_BUSERR) | 
|  | 50 | printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n", | 
|  | 51 | hpc3_berr_stat, | 
|  | 52 | (hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >> | 
|  | 53 | HPC3_BESTAT_PIDSHIFT, | 
|  | 54 | (hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA", | 
|  | 55 | hpc3_berr_stat & HPC3_BESTAT_BLMASK); | 
|  | 56 | if (extio_stat & EXTIO_EISA_BUSERR) | 
|  | 57 | printk(KERN_ERR "EISA Bus Error\n"); | 
|  | 58 | if (cpu_err_stat & CPU_ERRMASK) | 
|  | 59 | printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n", | 
|  | 60 | cpu_err_stat, | 
|  | 61 | cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "", | 
|  | 62 | cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "", | 
|  | 63 | cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "", | 
|  | 64 | cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "", | 
|  | 65 | cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "", | 
|  | 66 | cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "", | 
|  | 67 | cpu_err_addr); | 
|  | 68 | if (gio_err_stat & GIO_ERRMASK) | 
|  | 69 | printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n", | 
|  | 70 | gio_err_stat, | 
|  | 71 | gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "", | 
|  | 72 | gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "", | 
|  | 73 | gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "", | 
|  | 74 | gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "", | 
|  | 75 | gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "", | 
|  | 76 | gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "", | 
|  | 77 | gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "", | 
|  | 78 | gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "", | 
|  | 79 | gio_err_addr); | 
|  | 80 | } | 
|  | 81 |  | 
|  | 82 | /* | 
|  | 83 | * MC sends an interrupt whenever bus or parity errors occur. In addition, | 
|  | 84 | * if the error happened during a CPU read, it also asserts the bus error | 
|  | 85 | * pin on the R4K. Code in bus error handler save the MC bus error registers | 
|  | 86 | * and then clear the interrupt when this happens. | 
|  | 87 | */ | 
|  | 88 |  | 
|  | 89 | void ip22_be_interrupt(int irq) | 
|  | 90 | { | 
|  | 91 | const int field = 2 * sizeof(unsigned long); | 
|  | 92 | struct pt_regs *regs = get_irq_regs(); | 
|  | 93 |  | 
|  | 94 | save_and_clear_buserr(); | 
|  | 95 | print_buserr(); | 
|  | 96 | printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", | 
|  | 97 | (regs->cp0_cause & 4) ? "Data" : "Instruction", | 
|  | 98 | field, regs->cp0_epc, field, regs->regs[31]); | 
|  | 99 | /* Assume it would be too dangerous to continue ... */ | 
|  | 100 | die_if_kernel("Oops", regs); | 
|  | 101 | force_sig(SIGBUS, current); | 
|  | 102 | } | 
|  | 103 |  | 
|  | 104 | static int ip22_be_handler(struct pt_regs *regs, int is_fixup) | 
|  | 105 | { | 
|  | 106 | save_and_clear_buserr(); | 
|  | 107 | if (is_fixup) | 
|  | 108 | return MIPS_BE_FIXUP; | 
|  | 109 | print_buserr(); | 
|  | 110 | return MIPS_BE_FATAL; | 
|  | 111 | } | 
|  | 112 |  | 
|  | 113 | void __init ip22_be_init(void) | 
|  | 114 | { | 
|  | 115 | board_be_handler = ip22_be_handler; | 
|  | 116 | } |