| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * ST OHCI driver |
| 4 | * |
| 5 | * Copyright (C) 2014 STMicroelectronics – All Rights Reserved |
| 6 | * |
| 7 | * Author: Peter Griffin <peter.griffin@linaro.org> |
| 8 | * |
| 9 | * Derived from ohci-platform.c |
| 10 | */ |
| 11 | |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/dma-mapping.h> |
| 14 | #include <linux/hrtimer.h> |
| 15 | #include <linux/io.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/err.h> |
| 19 | #include <linux/phy/phy.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/reset.h> |
| 22 | #include <linux/usb/ohci_pdriver.h> |
| 23 | #include <linux/usb.h> |
| 24 | #include <linux/usb/hcd.h> |
| 25 | |
| 26 | #include "ohci.h" |
| 27 | |
| 28 | #define USB_MAX_CLKS 3 |
| 29 | |
| 30 | struct st_ohci_platform_priv { |
| 31 | struct clk *clks[USB_MAX_CLKS]; |
| 32 | struct clk *clk48; |
| 33 | struct reset_control *rst; |
| 34 | struct reset_control *pwr; |
| 35 | struct phy *phy; |
| 36 | }; |
| 37 | |
| 38 | #define DRIVER_DESC "OHCI STMicroelectronics driver" |
| 39 | |
| 40 | #define hcd_to_ohci_priv(h) \ |
| 41 | ((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv) |
| 42 | |
| 43 | static const char hcd_name[] = "ohci-st"; |
| 44 | |
| 45 | static int st_ohci_platform_power_on(struct platform_device *dev) |
| 46 | { |
| 47 | struct usb_hcd *hcd = platform_get_drvdata(dev); |
| 48 | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| 49 | int clk, ret; |
| 50 | |
| 51 | ret = reset_control_deassert(priv->pwr); |
| 52 | if (ret) |
| 53 | return ret; |
| 54 | |
| 55 | ret = reset_control_deassert(priv->rst); |
| 56 | if (ret) |
| 57 | goto err_assert_power; |
| 58 | |
| 59 | /* some SoCs don't have a dedicated 48Mhz clock, but those that do |
| 60 | need the rate to be explicitly set */ |
| 61 | if (priv->clk48) { |
| 62 | ret = clk_set_rate(priv->clk48, 48000000); |
| 63 | if (ret) |
| 64 | goto err_assert_reset; |
| 65 | } |
| 66 | |
| 67 | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) { |
| 68 | ret = clk_prepare_enable(priv->clks[clk]); |
| 69 | if (ret) |
| 70 | goto err_disable_clks; |
| 71 | } |
| 72 | |
| 73 | ret = phy_init(priv->phy); |
| 74 | if (ret) |
| 75 | goto err_disable_clks; |
| 76 | |
| 77 | ret = phy_power_on(priv->phy); |
| 78 | if (ret) |
| 79 | goto err_exit_phy; |
| 80 | |
| 81 | return 0; |
| 82 | |
| 83 | err_exit_phy: |
| 84 | phy_exit(priv->phy); |
| 85 | err_disable_clks: |
| 86 | while (--clk >= 0) |
| 87 | clk_disable_unprepare(priv->clks[clk]); |
| 88 | err_assert_reset: |
| 89 | reset_control_assert(priv->rst); |
| 90 | err_assert_power: |
| 91 | reset_control_assert(priv->pwr); |
| 92 | |
| 93 | return ret; |
| 94 | } |
| 95 | |
| 96 | static void st_ohci_platform_power_off(struct platform_device *dev) |
| 97 | { |
| 98 | struct usb_hcd *hcd = platform_get_drvdata(dev); |
| 99 | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| 100 | |
| 101 | int clk; |
| 102 | |
| 103 | reset_control_assert(priv->pwr); |
| 104 | |
| 105 | reset_control_assert(priv->rst); |
| 106 | |
| 107 | phy_power_off(priv->phy); |
| 108 | |
| 109 | phy_exit(priv->phy); |
| 110 | |
| 111 | for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--) |
| 112 | if (priv->clks[clk]) |
| 113 | clk_disable_unprepare(priv->clks[clk]); |
| 114 | } |
| 115 | |
| 116 | static struct hc_driver __read_mostly ohci_platform_hc_driver; |
| 117 | |
| 118 | static const struct ohci_driver_overrides platform_overrides __initconst = { |
| 119 | .product_desc = "ST OHCI controller", |
| 120 | .extra_priv_size = sizeof(struct st_ohci_platform_priv), |
| 121 | }; |
| 122 | |
| 123 | static struct usb_ohci_pdata ohci_platform_defaults = { |
| 124 | .power_on = st_ohci_platform_power_on, |
| 125 | .power_suspend = st_ohci_platform_power_off, |
| 126 | .power_off = st_ohci_platform_power_off, |
| 127 | }; |
| 128 | |
| 129 | static int st_ohci_platform_probe(struct platform_device *dev) |
| 130 | { |
| 131 | struct usb_hcd *hcd; |
| 132 | struct resource *res_mem; |
| 133 | struct usb_ohci_pdata *pdata = &ohci_platform_defaults; |
| 134 | struct st_ohci_platform_priv *priv; |
| 135 | struct ohci_hcd *ohci; |
| 136 | int err, irq, clk = 0; |
| 137 | |
| 138 | if (usb_disabled()) |
| 139 | return -ENODEV; |
| 140 | |
| 141 | irq = platform_get_irq(dev, 0); |
| 142 | if (irq < 0) { |
| 143 | dev_err(&dev->dev, "no irq provided"); |
| 144 | return irq; |
| 145 | } |
| 146 | |
| 147 | res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| 148 | if (!res_mem) { |
| 149 | dev_err(&dev->dev, "no memory resource provided"); |
| 150 | return -ENXIO; |
| 151 | } |
| 152 | |
| 153 | hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, |
| 154 | dev_name(&dev->dev)); |
| 155 | if (!hcd) |
| 156 | return -ENOMEM; |
| 157 | |
| 158 | platform_set_drvdata(dev, hcd); |
| 159 | dev->dev.platform_data = pdata; |
| 160 | priv = hcd_to_ohci_priv(hcd); |
| 161 | ohci = hcd_to_ohci(hcd); |
| 162 | |
| 163 | priv->phy = devm_phy_get(&dev->dev, "usb"); |
| 164 | if (IS_ERR(priv->phy)) { |
| 165 | err = PTR_ERR(priv->phy); |
| 166 | goto err_put_hcd; |
| 167 | } |
| 168 | |
| 169 | for (clk = 0; clk < USB_MAX_CLKS; clk++) { |
| 170 | priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); |
| 171 | if (IS_ERR(priv->clks[clk])) { |
| 172 | err = PTR_ERR(priv->clks[clk]); |
| 173 | if (err == -EPROBE_DEFER) |
| 174 | goto err_put_clks; |
| 175 | priv->clks[clk] = NULL; |
| 176 | break; |
| 177 | } |
| 178 | } |
| 179 | |
| 180 | /* some SoCs don't have a dedicated 48Mhz clock, but those that |
| 181 | do need the rate to be explicitly set */ |
| 182 | priv->clk48 = devm_clk_get(&dev->dev, "clk48"); |
| 183 | if (IS_ERR(priv->clk48)) { |
| 184 | dev_info(&dev->dev, "48MHz clk not found\n"); |
| 185 | priv->clk48 = NULL; |
| 186 | } |
| 187 | |
| 188 | priv->pwr = |
| 189 | devm_reset_control_get_optional_shared(&dev->dev, "power"); |
| 190 | if (IS_ERR(priv->pwr)) { |
| 191 | err = PTR_ERR(priv->pwr); |
| 192 | goto err_put_clks; |
| 193 | } |
| 194 | |
| 195 | priv->rst = |
| 196 | devm_reset_control_get_optional_shared(&dev->dev, "softreset"); |
| 197 | if (IS_ERR(priv->rst)) { |
| 198 | err = PTR_ERR(priv->rst); |
| 199 | goto err_put_clks; |
| 200 | } |
| 201 | |
| 202 | if (pdata->power_on) { |
| 203 | err = pdata->power_on(dev); |
| 204 | if (err < 0) |
| 205 | goto err_power; |
| 206 | } |
| 207 | |
| 208 | hcd->rsrc_start = res_mem->start; |
| 209 | hcd->rsrc_len = resource_size(res_mem); |
| 210 | |
| 211 | hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); |
| 212 | if (IS_ERR(hcd->regs)) { |
| 213 | err = PTR_ERR(hcd->regs); |
| 214 | goto err_power; |
| 215 | } |
| 216 | err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| 217 | if (err) |
| 218 | goto err_power; |
| 219 | |
| 220 | device_wakeup_enable(hcd->self.controller); |
| 221 | |
| 222 | platform_set_drvdata(dev, hcd); |
| 223 | |
| 224 | return err; |
| 225 | |
| 226 | err_power: |
| 227 | if (pdata->power_off) |
| 228 | pdata->power_off(dev); |
| 229 | |
| 230 | err_put_clks: |
| 231 | while (--clk >= 0) |
| 232 | clk_put(priv->clks[clk]); |
| 233 | err_put_hcd: |
| 234 | if (pdata == &ohci_platform_defaults) |
| 235 | dev->dev.platform_data = NULL; |
| 236 | |
| 237 | usb_put_hcd(hcd); |
| 238 | |
| 239 | return err; |
| 240 | } |
| 241 | |
| 242 | static int st_ohci_platform_remove(struct platform_device *dev) |
| 243 | { |
| 244 | struct usb_hcd *hcd = platform_get_drvdata(dev); |
| 245 | struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); |
| 246 | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| 247 | int clk; |
| 248 | |
| 249 | usb_remove_hcd(hcd); |
| 250 | |
| 251 | if (pdata->power_off) |
| 252 | pdata->power_off(dev); |
| 253 | |
| 254 | |
| 255 | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) |
| 256 | clk_put(priv->clks[clk]); |
| 257 | |
| 258 | usb_put_hcd(hcd); |
| 259 | |
| 260 | if (pdata == &ohci_platform_defaults) |
| 261 | dev->dev.platform_data = NULL; |
| 262 | |
| 263 | return 0; |
| 264 | } |
| 265 | |
| 266 | #ifdef CONFIG_PM_SLEEP |
| 267 | |
| 268 | static int st_ohci_suspend(struct device *dev) |
| 269 | { |
| 270 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 271 | struct usb_ohci_pdata *pdata = dev->platform_data; |
| 272 | struct platform_device *pdev = to_platform_device(dev); |
| 273 | bool do_wakeup = device_may_wakeup(dev); |
| 274 | int ret; |
| 275 | |
| 276 | ret = ohci_suspend(hcd, do_wakeup); |
| 277 | if (ret) |
| 278 | return ret; |
| 279 | |
| 280 | if (pdata->power_suspend) |
| 281 | pdata->power_suspend(pdev); |
| 282 | |
| 283 | return ret; |
| 284 | } |
| 285 | |
| 286 | static int st_ohci_resume(struct device *dev) |
| 287 | { |
| 288 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 289 | struct usb_ohci_pdata *pdata = dev_get_platdata(dev); |
| 290 | struct platform_device *pdev = to_platform_device(dev); |
| 291 | int err; |
| 292 | |
| 293 | if (pdata->power_on) { |
| 294 | err = pdata->power_on(pdev); |
| 295 | if (err < 0) |
| 296 | return err; |
| 297 | } |
| 298 | |
| 299 | ohci_resume(hcd, false); |
| 300 | return 0; |
| 301 | } |
| 302 | |
| 303 | static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume); |
| 304 | |
| 305 | #endif /* CONFIG_PM_SLEEP */ |
| 306 | |
| 307 | static const struct of_device_id st_ohci_platform_ids[] = { |
| 308 | { .compatible = "st,st-ohci-300x", }, |
| 309 | { /* sentinel */ } |
| 310 | }; |
| 311 | MODULE_DEVICE_TABLE(of, st_ohci_platform_ids); |
| 312 | |
| 313 | static struct platform_driver ohci_platform_driver = { |
| 314 | .probe = st_ohci_platform_probe, |
| 315 | .remove = st_ohci_platform_remove, |
| 316 | .shutdown = usb_hcd_platform_shutdown, |
| 317 | .driver = { |
| 318 | .name = "st-ohci", |
| 319 | #ifdef CONFIG_PM_SLEEP |
| 320 | .pm = &st_ohci_pm_ops, |
| 321 | #endif |
| 322 | .of_match_table = st_ohci_platform_ids, |
| 323 | } |
| 324 | }; |
| 325 | |
| 326 | static int __init ohci_platform_init(void) |
| 327 | { |
| 328 | if (usb_disabled()) |
| 329 | return -ENODEV; |
| 330 | |
| 331 | pr_info("%s: " DRIVER_DESC "\n", hcd_name); |
| 332 | |
| 333 | ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); |
| 334 | return platform_driver_register(&ohci_platform_driver); |
| 335 | } |
| 336 | module_init(ohci_platform_init); |
| 337 | |
| 338 | static void __exit ohci_platform_cleanup(void) |
| 339 | { |
| 340 | platform_driver_unregister(&ohci_platform_driver); |
| 341 | } |
| 342 | module_exit(ohci_platform_cleanup); |
| 343 | |
| 344 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 345 | MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); |
| 346 | MODULE_LICENSE("GPL"); |