| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Watchdog driver for DA9063 PMICs. |
| 4 | * |
| 5 | * Copyright(c) 2012 Dialog Semiconductor Ltd. |
| 6 | * |
| 7 | * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com> |
| 8 | * |
| 9 | */ |
| 10 | |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/module.h> |
| 13 | #include <linux/watchdog.h> |
| 14 | #include <linux/platform_device.h> |
| 15 | #include <linux/uaccess.h> |
| 16 | #include <linux/slab.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/mfd/da9063/registers.h> |
| 19 | #include <linux/mfd/da9063/core.h> |
| 20 | #include <linux/regmap.h> |
| 21 | |
| 22 | /* |
| 23 | * Watchdog selector to timeout in seconds. |
| 24 | * 0: WDT disabled; |
| 25 | * others: timeout = 2048 ms * 2^(TWDSCALE-1). |
| 26 | */ |
| 27 | static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 }; |
| 28 | #define DA9063_TWDSCALE_DISABLE 0 |
| 29 | #define DA9063_TWDSCALE_MIN 1 |
| 30 | #define DA9063_TWDSCALE_MAX (ARRAY_SIZE(wdt_timeout) - 1) |
| 31 | #define DA9063_WDT_MIN_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MIN] |
| 32 | #define DA9063_WDT_MAX_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MAX] |
| 33 | #define DA9063_WDG_TIMEOUT wdt_timeout[3] |
| 34 | #define DA9063_RESET_PROTECTION_MS 256 |
| 35 | |
| 36 | static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs) |
| 37 | { |
| 38 | unsigned int i; |
| 39 | |
| 40 | for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) { |
| 41 | if (wdt_timeout[i] >= secs) |
| 42 | return i; |
| 43 | } |
| 44 | |
| 45 | return DA9063_TWDSCALE_MAX; |
| 46 | } |
| 47 | |
| 48 | /* |
| 49 | * Return 0 if watchdog is disabled, else non zero. |
| 50 | */ |
| 51 | static unsigned int da9063_wdt_is_running(struct da9063 *da9063) |
| 52 | { |
| 53 | unsigned int val; |
| 54 | |
| 55 | regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val); |
| 56 | |
| 57 | return val & DA9063_TWDSCALE_MASK; |
| 58 | } |
| 59 | |
| 60 | static int da9063_wdt_disable_timer(struct da9063 *da9063) |
| 61 | { |
| 62 | return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, |
| 63 | DA9063_TWDSCALE_MASK, |
| 64 | DA9063_TWDSCALE_DISABLE); |
| 65 | } |
| 66 | |
| 67 | static int |
| 68 | da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout) |
| 69 | { |
| 70 | unsigned int regval; |
| 71 | int ret; |
| 72 | |
| 73 | /* |
| 74 | * The watchdog triggers a reboot if a timeout value is already |
| 75 | * programmed because the timeout value combines two functions |
| 76 | * in one: indicating the counter limit and starting the watchdog. |
| 77 | * The watchdog must be disabled to be able to change the timeout |
| 78 | * value if the watchdog is already running. Then we can set the |
| 79 | * new timeout value which enables the watchdog again. |
| 80 | */ |
| 81 | ret = da9063_wdt_disable_timer(da9063); |
| 82 | if (ret) |
| 83 | return ret; |
| 84 | |
| 85 | usleep_range(150, 300); |
| 86 | regval = da9063_wdt_timeout_to_sel(timeout); |
| 87 | |
| 88 | return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, |
| 89 | DA9063_TWDSCALE_MASK, regval); |
| 90 | } |
| 91 | |
| 92 | static int da9063_wdt_start(struct watchdog_device *wdd) |
| 93 | { |
| 94 | struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| 95 | int ret; |
| 96 | |
| 97 | ret = da9063_wdt_update_timeout(da9063, wdd->timeout); |
| 98 | if (ret) |
| 99 | dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n", |
| 100 | ret); |
| 101 | |
| 102 | return ret; |
| 103 | } |
| 104 | |
| 105 | static int da9063_wdt_stop(struct watchdog_device *wdd) |
| 106 | { |
| 107 | struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| 108 | int ret; |
| 109 | |
| 110 | ret = da9063_wdt_disable_timer(da9063); |
| 111 | if (ret) |
| 112 | dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n", |
| 113 | ret); |
| 114 | |
| 115 | return ret; |
| 116 | } |
| 117 | |
| 118 | static int da9063_wdt_ping(struct watchdog_device *wdd) |
| 119 | { |
| 120 | struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| 121 | int ret; |
| 122 | |
| 123 | ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, |
| 124 | DA9063_WATCHDOG); |
| 125 | if (ret) |
| 126 | dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n", |
| 127 | ret); |
| 128 | |
| 129 | return ret; |
| 130 | } |
| 131 | |
| 132 | static int da9063_wdt_set_timeout(struct watchdog_device *wdd, |
| 133 | unsigned int timeout) |
| 134 | { |
| 135 | struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| 136 | int ret = 0; |
| 137 | |
| 138 | /* |
| 139 | * There are two cases when a set_timeout() will be called: |
| 140 | * 1. The watchdog is off and someone wants to set the timeout for the |
| 141 | * further use. |
| 142 | * 2. The watchdog is already running and a new timeout value should be |
| 143 | * set. |
| 144 | * |
| 145 | * The watchdog can't store a timeout value not equal zero without |
| 146 | * enabling the watchdog, so the timeout must be buffered by the driver. |
| 147 | */ |
| 148 | if (watchdog_active(wdd)) |
| 149 | ret = da9063_wdt_update_timeout(da9063, timeout); |
| 150 | |
| 151 | if (ret) |
| 152 | dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n", |
| 153 | ret); |
| 154 | else |
| 155 | wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)]; |
| 156 | |
| 157 | return ret; |
| 158 | } |
| 159 | |
| 160 | static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action, |
| 161 | void *data) |
| 162 | { |
| 163 | struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| 164 | int ret; |
| 165 | |
| 166 | ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, |
| 167 | DA9063_SHUTDOWN); |
| 168 | if (ret) |
| 169 | dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n", |
| 170 | ret); |
| 171 | |
| 172 | return ret; |
| 173 | } |
| 174 | |
| 175 | static const struct watchdog_info da9063_watchdog_info = { |
| 176 | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| 177 | .identity = "DA9063 Watchdog", |
| 178 | }; |
| 179 | |
| 180 | static const struct watchdog_ops da9063_watchdog_ops = { |
| 181 | .owner = THIS_MODULE, |
| 182 | .start = da9063_wdt_start, |
| 183 | .stop = da9063_wdt_stop, |
| 184 | .ping = da9063_wdt_ping, |
| 185 | .set_timeout = da9063_wdt_set_timeout, |
| 186 | .restart = da9063_wdt_restart, |
| 187 | }; |
| 188 | |
| 189 | static int da9063_wdt_probe(struct platform_device *pdev) |
| 190 | { |
| 191 | struct da9063 *da9063; |
| 192 | struct watchdog_device *wdd; |
| 193 | |
| 194 | if (!pdev->dev.parent) |
| 195 | return -EINVAL; |
| 196 | |
| 197 | da9063 = dev_get_drvdata(pdev->dev.parent); |
| 198 | if (!da9063) |
| 199 | return -EINVAL; |
| 200 | |
| 201 | wdd = devm_kzalloc(&pdev->dev, sizeof(*wdd), GFP_KERNEL); |
| 202 | if (!wdd) |
| 203 | return -ENOMEM; |
| 204 | |
| 205 | wdd->info = &da9063_watchdog_info; |
| 206 | wdd->ops = &da9063_watchdog_ops; |
| 207 | wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT; |
| 208 | wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT; |
| 209 | wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS; |
| 210 | wdd->timeout = DA9063_WDG_TIMEOUT; |
| 211 | wdd->parent = &pdev->dev; |
| 212 | |
| 213 | wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS; |
| 214 | |
| 215 | watchdog_set_restart_priority(wdd, 128); |
| 216 | |
| 217 | watchdog_set_drvdata(wdd, da9063); |
| 218 | |
| 219 | /* Change the timeout to the default value if the watchdog is running */ |
| 220 | if (da9063_wdt_is_running(da9063)) { |
| 221 | da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT); |
| 222 | set_bit(WDOG_HW_RUNNING, &wdd->status); |
| 223 | } |
| 224 | |
| 225 | return devm_watchdog_register_device(&pdev->dev, wdd); |
| 226 | } |
| 227 | |
| 228 | static struct platform_driver da9063_wdt_driver = { |
| 229 | .probe = da9063_wdt_probe, |
| 230 | .driver = { |
| 231 | .name = DA9063_DRVNAME_WATCHDOG, |
| 232 | }, |
| 233 | }; |
| 234 | module_platform_driver(da9063_wdt_driver); |
| 235 | |
| 236 | MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>"); |
| 237 | MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063"); |
| 238 | MODULE_LICENSE("GPL"); |
| 239 | MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG); |