| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 | 
|  | 2 | /* | 
|  | 3 | * ST EHCI driver | 
|  | 4 | * | 
|  | 5 | * Copyright (C) 2014 STMicroelectronics – All Rights Reserved | 
|  | 6 | * | 
|  | 7 | * Author: Peter Griffin <peter.griffin@linaro.org> | 
|  | 8 | * | 
|  | 9 | * Derived from ehci-platform.c | 
|  | 10 | */ | 
|  | 11 |  | 
|  | 12 | #include <linux/clk.h> | 
|  | 13 | #include <linux/dma-mapping.h> | 
|  | 14 | #include <linux/err.h> | 
|  | 15 | #include <linux/kernel.h> | 
|  | 16 | #include <linux/hrtimer.h> | 
|  | 17 | #include <linux/io.h> | 
|  | 18 | #include <linux/module.h> | 
|  | 19 | #include <linux/of.h> | 
|  | 20 | #include <linux/phy/phy.h> | 
|  | 21 | #include <linux/platform_device.h> | 
|  | 22 | #include <linux/reset.h> | 
|  | 23 | #include <linux/usb.h> | 
|  | 24 | #include <linux/usb/hcd.h> | 
|  | 25 | #include <linux/usb/ehci_pdriver.h> | 
|  | 26 | #include <linux/pinctrl/consumer.h> | 
|  | 27 |  | 
|  | 28 | #include "ehci.h" | 
|  | 29 |  | 
|  | 30 | #define USB_MAX_CLKS 3 | 
|  | 31 |  | 
|  | 32 | struct st_ehci_platform_priv { | 
|  | 33 | struct clk *clks[USB_MAX_CLKS]; | 
|  | 34 | struct clk *clk48; | 
|  | 35 | struct reset_control *rst; | 
|  | 36 | struct reset_control *pwr; | 
|  | 37 | struct phy *phy; | 
|  | 38 | }; | 
|  | 39 |  | 
|  | 40 | #define DRIVER_DESC "EHCI STMicroelectronics driver" | 
|  | 41 |  | 
|  | 42 | #define hcd_to_ehci_priv(h) \ | 
|  | 43 | ((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv) | 
|  | 44 |  | 
|  | 45 | static const char hcd_name[] = "ehci-st"; | 
|  | 46 |  | 
|  | 47 | #define EHCI_CAPS_SIZE 0x10 | 
|  | 48 | #define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84) | 
|  | 49 |  | 
|  | 50 | static int st_ehci_platform_reset(struct usb_hcd *hcd) | 
|  | 51 | { | 
|  | 52 | struct platform_device *pdev = to_platform_device(hcd->self.controller); | 
|  | 53 | struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); | 
|  | 54 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
|  | 55 | u32 threshold; | 
|  | 56 |  | 
|  | 57 | /* Set EHCI packet buffer IN/OUT threshold to 128 bytes */ | 
|  | 58 | threshold = 128 | (128 << 16); | 
|  | 59 | writel(threshold, hcd->regs + AHB2STBUS_INSREG01); | 
|  | 60 |  | 
|  | 61 | ehci->caps = hcd->regs + pdata->caps_offset; | 
|  | 62 | return ehci_setup(hcd); | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | static int st_ehci_platform_power_on(struct platform_device *dev) | 
|  | 66 | { | 
|  | 67 | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | 68 | struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); | 
|  | 69 | int clk, ret; | 
|  | 70 |  | 
|  | 71 | ret = reset_control_deassert(priv->pwr); | 
|  | 72 | if (ret) | 
|  | 73 | return ret; | 
|  | 74 |  | 
|  | 75 | ret = reset_control_deassert(priv->rst); | 
|  | 76 | if (ret) | 
|  | 77 | goto err_assert_power; | 
|  | 78 |  | 
|  | 79 | /* some SoCs don't have a dedicated 48Mhz clock, but those that do | 
|  | 80 | need the rate to be explicitly set */ | 
|  | 81 | if (priv->clk48) { | 
|  | 82 | ret = clk_set_rate(priv->clk48, 48000000); | 
|  | 83 | if (ret) | 
|  | 84 | goto err_assert_reset; | 
|  | 85 | } | 
|  | 86 |  | 
|  | 87 | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) { | 
|  | 88 | ret = clk_prepare_enable(priv->clks[clk]); | 
|  | 89 | if (ret) | 
|  | 90 | goto err_disable_clks; | 
|  | 91 | } | 
|  | 92 |  | 
|  | 93 | ret = phy_init(priv->phy); | 
|  | 94 | if (ret) | 
|  | 95 | goto err_disable_clks; | 
|  | 96 |  | 
|  | 97 | ret = phy_power_on(priv->phy); | 
|  | 98 | if (ret) | 
|  | 99 | goto err_exit_phy; | 
|  | 100 |  | 
|  | 101 | return 0; | 
|  | 102 |  | 
|  | 103 | err_exit_phy: | 
|  | 104 | phy_exit(priv->phy); | 
|  | 105 | err_disable_clks: | 
|  | 106 | while (--clk >= 0) | 
|  | 107 | clk_disable_unprepare(priv->clks[clk]); | 
|  | 108 | err_assert_reset: | 
|  | 109 | reset_control_assert(priv->rst); | 
|  | 110 | err_assert_power: | 
|  | 111 | reset_control_assert(priv->pwr); | 
|  | 112 |  | 
|  | 113 | return ret; | 
|  | 114 | } | 
|  | 115 |  | 
|  | 116 | static void st_ehci_platform_power_off(struct platform_device *dev) | 
|  | 117 | { | 
|  | 118 | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | 119 | struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); | 
|  | 120 | int clk; | 
|  | 121 |  | 
|  | 122 | reset_control_assert(priv->pwr); | 
|  | 123 |  | 
|  | 124 | reset_control_assert(priv->rst); | 
|  | 125 |  | 
|  | 126 | phy_power_off(priv->phy); | 
|  | 127 |  | 
|  | 128 | phy_exit(priv->phy); | 
|  | 129 |  | 
|  | 130 | for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--) | 
|  | 131 | if (priv->clks[clk]) | 
|  | 132 | clk_disable_unprepare(priv->clks[clk]); | 
|  | 133 |  | 
|  | 134 | } | 
|  | 135 |  | 
|  | 136 | static struct hc_driver __read_mostly ehci_platform_hc_driver; | 
|  | 137 |  | 
|  | 138 | static const struct ehci_driver_overrides platform_overrides __initconst = { | 
|  | 139 | .reset =		st_ehci_platform_reset, | 
|  | 140 | .extra_priv_size =	sizeof(struct st_ehci_platform_priv), | 
|  | 141 | }; | 
|  | 142 |  | 
|  | 143 | static struct usb_ehci_pdata ehci_platform_defaults = { | 
|  | 144 | .power_on =		st_ehci_platform_power_on, | 
|  | 145 | .power_suspend =	st_ehci_platform_power_off, | 
|  | 146 | .power_off =		st_ehci_platform_power_off, | 
|  | 147 | }; | 
|  | 148 |  | 
|  | 149 | static int st_ehci_platform_probe(struct platform_device *dev) | 
|  | 150 | { | 
|  | 151 | struct usb_hcd *hcd; | 
|  | 152 | struct resource *res_mem; | 
|  | 153 | struct usb_ehci_pdata *pdata = &ehci_platform_defaults; | 
|  | 154 | struct st_ehci_platform_priv *priv; | 
|  | 155 | struct ehci_hcd *ehci; | 
|  | 156 | int err, irq, clk = 0; | 
|  | 157 |  | 
|  | 158 | if (usb_disabled()) | 
|  | 159 | return -ENODEV; | 
|  | 160 |  | 
|  | 161 | irq = platform_get_irq(dev, 0); | 
|  | 162 | if (irq < 0) { | 
|  | 163 | dev_err(&dev->dev, "no irq provided"); | 
|  | 164 | return irq; | 
|  | 165 | } | 
|  | 166 | res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); | 
|  | 167 | if (!res_mem) { | 
|  | 168 | dev_err(&dev->dev, "no memory resource provided"); | 
|  | 169 | return -ENXIO; | 
|  | 170 | } | 
|  | 171 |  | 
|  | 172 | hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, | 
|  | 173 | dev_name(&dev->dev)); | 
|  | 174 | if (!hcd) | 
|  | 175 | return -ENOMEM; | 
|  | 176 |  | 
|  | 177 | platform_set_drvdata(dev, hcd); | 
|  | 178 | dev->dev.platform_data = pdata; | 
|  | 179 | priv = hcd_to_ehci_priv(hcd); | 
|  | 180 | ehci = hcd_to_ehci(hcd); | 
|  | 181 |  | 
|  | 182 | priv->phy = devm_phy_get(&dev->dev, "usb"); | 
|  | 183 | if (IS_ERR(priv->phy)) { | 
|  | 184 | err = PTR_ERR(priv->phy); | 
|  | 185 | goto err_put_hcd; | 
|  | 186 | } | 
|  | 187 |  | 
|  | 188 | for (clk = 0; clk < USB_MAX_CLKS; clk++) { | 
|  | 189 | priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); | 
|  | 190 | if (IS_ERR(priv->clks[clk])) { | 
|  | 191 | err = PTR_ERR(priv->clks[clk]); | 
|  | 192 | if (err == -EPROBE_DEFER) | 
|  | 193 | goto err_put_clks; | 
|  | 194 | priv->clks[clk] = NULL; | 
|  | 195 | break; | 
|  | 196 | } | 
|  | 197 | } | 
|  | 198 |  | 
|  | 199 | /* some SoCs don't have a dedicated 48Mhz clock, but those that | 
|  | 200 | do need the rate to be explicitly set */ | 
|  | 201 | priv->clk48 = devm_clk_get(&dev->dev, "clk48"); | 
|  | 202 | if (IS_ERR(priv->clk48)) { | 
|  | 203 | dev_info(&dev->dev, "48MHz clk not found\n"); | 
|  | 204 | priv->clk48 = NULL; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | priv->pwr = | 
|  | 208 | devm_reset_control_get_optional_shared(&dev->dev, "power"); | 
|  | 209 | if (IS_ERR(priv->pwr)) { | 
|  | 210 | err = PTR_ERR(priv->pwr); | 
|  | 211 | if (err == -EPROBE_DEFER) | 
|  | 212 | goto err_put_clks; | 
|  | 213 | priv->pwr = NULL; | 
|  | 214 | } | 
|  | 215 |  | 
|  | 216 | priv->rst = | 
|  | 217 | devm_reset_control_get_optional_shared(&dev->dev, "softreset"); | 
|  | 218 | if (IS_ERR(priv->rst)) { | 
|  | 219 | err = PTR_ERR(priv->rst); | 
|  | 220 | if (err == -EPROBE_DEFER) | 
|  | 221 | goto err_put_clks; | 
|  | 222 | priv->rst = NULL; | 
|  | 223 | } | 
|  | 224 |  | 
|  | 225 | if (pdata->power_on) { | 
|  | 226 | err = pdata->power_on(dev); | 
|  | 227 | if (err < 0) | 
|  | 228 | goto err_put_clks; | 
|  | 229 | } | 
|  | 230 |  | 
|  | 231 | hcd->rsrc_start = res_mem->start; | 
|  | 232 | hcd->rsrc_len = resource_size(res_mem); | 
|  | 233 |  | 
|  | 234 | hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); | 
|  | 235 | if (IS_ERR(hcd->regs)) { | 
|  | 236 | err = PTR_ERR(hcd->regs); | 
|  | 237 | goto err_put_clks; | 
|  | 238 | } | 
|  | 239 |  | 
|  | 240 | err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
|  | 241 | if (err) | 
|  | 242 | goto err_put_clks; | 
|  | 243 |  | 
|  | 244 | device_wakeup_enable(hcd->self.controller); | 
|  | 245 | platform_set_drvdata(dev, hcd); | 
|  | 246 |  | 
|  | 247 | return err; | 
|  | 248 |  | 
|  | 249 | err_put_clks: | 
|  | 250 | while (--clk >= 0) | 
|  | 251 | clk_put(priv->clks[clk]); | 
|  | 252 | err_put_hcd: | 
|  | 253 | if (pdata == &ehci_platform_defaults) | 
|  | 254 | dev->dev.platform_data = NULL; | 
|  | 255 |  | 
|  | 256 | usb_put_hcd(hcd); | 
|  | 257 |  | 
|  | 258 | return err; | 
|  | 259 | } | 
|  | 260 |  | 
|  | 261 | static int st_ehci_platform_remove(struct platform_device *dev) | 
|  | 262 | { | 
|  | 263 | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | 264 | struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); | 
|  | 265 | struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); | 
|  | 266 | int clk; | 
|  | 267 |  | 
|  | 268 | usb_remove_hcd(hcd); | 
|  | 269 |  | 
|  | 270 | if (pdata->power_off) | 
|  | 271 | pdata->power_off(dev); | 
|  | 272 |  | 
|  | 273 | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) | 
|  | 274 | clk_put(priv->clks[clk]); | 
|  | 275 |  | 
|  | 276 | usb_put_hcd(hcd); | 
|  | 277 |  | 
|  | 278 | if (pdata == &ehci_platform_defaults) | 
|  | 279 | dev->dev.platform_data = NULL; | 
|  | 280 |  | 
|  | 281 | return 0; | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | #ifdef CONFIG_PM_SLEEP | 
|  | 285 |  | 
|  | 286 | static int st_ehci_suspend(struct device *dev) | 
|  | 287 | { | 
|  | 288 | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | 289 | struct usb_ehci_pdata *pdata = dev_get_platdata(dev); | 
|  | 290 | struct platform_device *pdev = to_platform_device(dev); | 
|  | 291 | bool do_wakeup = device_may_wakeup(dev); | 
|  | 292 | int ret; | 
|  | 293 |  | 
|  | 294 | ret = ehci_suspend(hcd, do_wakeup); | 
|  | 295 | if (ret) | 
|  | 296 | return ret; | 
|  | 297 |  | 
|  | 298 | if (pdata->power_suspend) | 
|  | 299 | pdata->power_suspend(pdev); | 
|  | 300 |  | 
|  | 301 | pinctrl_pm_select_sleep_state(dev); | 
|  | 302 |  | 
|  | 303 | return ret; | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 | static int st_ehci_resume(struct device *dev) | 
|  | 307 | { | 
|  | 308 | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | 309 | struct usb_ehci_pdata *pdata = dev_get_platdata(dev); | 
|  | 310 | struct platform_device *pdev = to_platform_device(dev); | 
|  | 311 | int err; | 
|  | 312 |  | 
|  | 313 | pinctrl_pm_select_default_state(dev); | 
|  | 314 |  | 
|  | 315 | if (pdata->power_on) { | 
|  | 316 | err = pdata->power_on(pdev); | 
|  | 317 | if (err < 0) | 
|  | 318 | return err; | 
|  | 319 | } | 
|  | 320 |  | 
|  | 321 | ehci_resume(hcd, false); | 
|  | 322 | return 0; | 
|  | 323 | } | 
|  | 324 |  | 
|  | 325 | static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume); | 
|  | 326 |  | 
|  | 327 | #endif /* CONFIG_PM_SLEEP */ | 
|  | 328 |  | 
|  | 329 | static const struct of_device_id st_ehci_ids[] = { | 
|  | 330 | { .compatible = "st,st-ehci-300x", }, | 
|  | 331 | { /* sentinel */ } | 
|  | 332 | }; | 
|  | 333 | MODULE_DEVICE_TABLE(of, st_ehci_ids); | 
|  | 334 |  | 
|  | 335 | static struct platform_driver ehci_platform_driver = { | 
|  | 336 | .probe		= st_ehci_platform_probe, | 
|  | 337 | .remove		= st_ehci_platform_remove, | 
|  | 338 | .shutdown	= usb_hcd_platform_shutdown, | 
|  | 339 | .driver		= { | 
|  | 340 | .name	= "st-ehci", | 
|  | 341 | #ifdef CONFIG_PM_SLEEP | 
|  | 342 | .pm	= &st_ehci_pm_ops, | 
|  | 343 | #endif | 
|  | 344 | .of_match_table = st_ehci_ids, | 
|  | 345 | } | 
|  | 346 | }; | 
|  | 347 |  | 
|  | 348 | static int __init ehci_platform_init(void) | 
|  | 349 | { | 
|  | 350 | if (usb_disabled()) | 
|  | 351 | return -ENODEV; | 
|  | 352 |  | 
|  | 353 | pr_info("%s: " DRIVER_DESC "\n", hcd_name); | 
|  | 354 |  | 
|  | 355 | ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); | 
|  | 356 | return platform_driver_register(&ehci_platform_driver); | 
|  | 357 | } | 
|  | 358 | module_init(ehci_platform_init); | 
|  | 359 |  | 
|  | 360 | static void __exit ehci_platform_cleanup(void) | 
|  | 361 | { | 
|  | 362 | platform_driver_unregister(&ehci_platform_driver); | 
|  | 363 | } | 
|  | 364 | module_exit(ehci_platform_cleanup); | 
|  | 365 |  | 
|  | 366 | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | 367 | MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); | 
|  | 368 | MODULE_LICENSE("GPL"); |