| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright (c) 2008, 2009 open80211s Ltd. | 
|  | 3 | * Authors:    Luis Carlos Cobo <luisca@cozybit.com> | 
|  | 4 | * 	       Javier Cardona <javier@cozybit.com> | 
|  | 5 | * | 
|  | 6 | * This program is free software; you can redistribute it and/or modify | 
|  | 7 | * it under the terms of the GNU General Public License version 2 as | 
|  | 8 | * published by the Free Software Foundation. | 
|  | 9 | */ | 
|  | 10 |  | 
|  | 11 | #include <linux/slab.h> | 
|  | 12 | #include <asm/unaligned.h> | 
|  | 13 | #include "ieee80211_i.h" | 
|  | 14 | #include "mesh.h" | 
|  | 15 | #include "driver-ops.h" | 
|  | 16 |  | 
|  | 17 | static int mesh_allocated; | 
|  | 18 | static struct kmem_cache *rm_cache; | 
|  | 19 |  | 
|  | 20 | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
|  | 21 | { | 
|  | 22 | return (mgmt->u.action.u.mesh_action.action_code == | 
|  | 23 | WLAN_MESH_ACTION_HWMP_PATH_SELECTION); | 
|  | 24 | } | 
|  | 25 |  | 
|  | 26 | void ieee80211s_init(void) | 
|  | 27 | { | 
|  | 28 | mesh_allocated = 1; | 
|  | 29 | rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | 
|  | 30 | 0, 0, NULL); | 
|  | 31 | } | 
|  | 32 |  | 
|  | 33 | void ieee80211s_stop(void) | 
|  | 34 | { | 
|  | 35 | if (!mesh_allocated) | 
|  | 36 | return; | 
|  | 37 | kmem_cache_destroy(rm_cache); | 
|  | 38 | } | 
|  | 39 |  | 
|  | 40 | static void ieee80211_mesh_housekeeping_timer(struct timer_list *t) | 
|  | 41 | { | 
|  | 42 | struct ieee80211_sub_if_data *sdata = | 
|  | 43 | from_timer(sdata, t, u.mesh.housekeeping_timer); | 
|  | 44 | struct ieee80211_local *local = sdata->local; | 
|  | 45 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 46 |  | 
|  | 47 | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  | 48 |  | 
|  | 49 | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | 50 | } | 
|  | 51 |  | 
|  | 52 | /** | 
|  | 53 | * mesh_matches_local - check if the config of a mesh point matches ours | 
|  | 54 | * | 
|  | 55 | * @sdata: local mesh subif | 
|  | 56 | * @ie: information elements of a management frame from the mesh peer | 
|  | 57 | * | 
|  | 58 | * This function checks if the mesh configuration of a mesh point matches the | 
|  | 59 | * local mesh configuration, i.e. if both nodes belong to the same mesh network. | 
|  | 60 | */ | 
|  | 61 | bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, | 
|  | 62 | struct ieee802_11_elems *ie) | 
|  | 63 | { | 
|  | 64 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 65 | u32 basic_rates = 0; | 
|  | 66 | struct cfg80211_chan_def sta_chan_def; | 
|  | 67 | struct ieee80211_supported_band *sband; | 
|  | 68 |  | 
|  | 69 | /* | 
|  | 70 | * As support for each feature is added, check for matching | 
|  | 71 | * - On mesh config capabilities | 
|  | 72 | *   - Power Save Support En | 
|  | 73 | *   - Sync support enabled | 
|  | 74 | *   - Sync support active | 
|  | 75 | *   - Sync support required from peer | 
|  | 76 | *   - MDA enabled | 
|  | 77 | * - Power management control on fc | 
|  | 78 | */ | 
|  | 79 | if (!(ifmsh->mesh_id_len == ie->mesh_id_len && | 
|  | 80 | memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | 
|  | 81 | (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && | 
|  | 82 | (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && | 
|  | 83 | (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && | 
|  | 84 | (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && | 
|  | 85 | (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) | 
|  | 86 | return false; | 
|  | 87 |  | 
|  | 88 | sband = ieee80211_get_sband(sdata); | 
|  | 89 | if (!sband) | 
|  | 90 | return false; | 
|  | 91 |  | 
|  | 92 | ieee80211_sta_get_rates(sdata, ie, sband->band, | 
|  | 93 | &basic_rates); | 
|  | 94 |  | 
|  | 95 | if (sdata->vif.bss_conf.basic_rates != basic_rates) | 
|  | 96 | return false; | 
|  | 97 |  | 
|  | 98 | cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chandef.chan, | 
|  | 99 | NL80211_CHAN_NO_HT); | 
|  | 100 | ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def); | 
|  | 101 | ieee80211_chandef_vht_oper(ie->vht_operation, &sta_chan_def); | 
|  | 102 |  | 
|  | 103 | if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef, | 
|  | 104 | &sta_chan_def)) | 
|  | 105 | return false; | 
|  | 106 |  | 
|  | 107 | return true; | 
|  | 108 | } | 
|  | 109 |  | 
|  | 110 | /** | 
|  | 111 | * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | 
|  | 112 | * | 
|  | 113 | * @ie: information elements of a management frame from the mesh peer | 
|  | 114 | */ | 
|  | 115 | bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) | 
|  | 116 | { | 
|  | 117 | return (ie->mesh_config->meshconf_cap & | 
|  | 118 | IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; | 
|  | 119 | } | 
|  | 120 |  | 
|  | 121 | /** | 
|  | 122 | * mesh_accept_plinks_update - update accepting_plink in local mesh beacons | 
|  | 123 | * | 
|  | 124 | * @sdata: mesh interface in which mesh beacons are going to be updated | 
|  | 125 | * | 
|  | 126 | * Returns: beacon changed flag if the beacon content changed. | 
|  | 127 | */ | 
|  | 128 | u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | 
|  | 129 | { | 
|  | 130 | bool free_plinks; | 
|  | 131 | u32 changed = 0; | 
|  | 132 |  | 
|  | 133 | /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | 
|  | 134 | * the mesh interface might be able to establish plinks with peers that | 
|  | 135 | * are already on the table but are not on PLINK_ESTAB state. However, | 
|  | 136 | * in general the mesh interface is not accepting peer link requests | 
|  | 137 | * from new peers, and that must be reflected in the beacon | 
|  | 138 | */ | 
|  | 139 | free_plinks = mesh_plink_availables(sdata); | 
|  | 140 |  | 
|  | 141 | if (free_plinks != sdata->u.mesh.accepting_plinks) { | 
|  | 142 | sdata->u.mesh.accepting_plinks = free_plinks; | 
|  | 143 | changed = BSS_CHANGED_BEACON; | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | return changed; | 
|  | 147 | } | 
|  | 148 |  | 
|  | 149 | /* | 
|  | 150 | * mesh_sta_cleanup - clean up any mesh sta state | 
|  | 151 | * | 
|  | 152 | * @sta: mesh sta to clean up. | 
|  | 153 | */ | 
|  | 154 | void mesh_sta_cleanup(struct sta_info *sta) | 
|  | 155 | { | 
|  | 156 | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | 157 | u32 changed = mesh_plink_deactivate(sta); | 
|  | 158 |  | 
|  | 159 | if (changed) | 
|  | 160 | ieee80211_mbss_info_change_notify(sdata, changed); | 
|  | 161 | } | 
|  | 162 |  | 
|  | 163 | int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) | 
|  | 164 | { | 
|  | 165 | int i; | 
|  | 166 |  | 
|  | 167 | sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); | 
|  | 168 | if (!sdata->u.mesh.rmc) | 
|  | 169 | return -ENOMEM; | 
|  | 170 | sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; | 
|  | 171 | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | 172 | INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]); | 
|  | 173 | return 0; | 
|  | 174 | } | 
|  | 175 |  | 
|  | 176 | void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) | 
|  | 177 | { | 
|  | 178 | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | 179 | struct rmc_entry *p; | 
|  | 180 | struct hlist_node *n; | 
|  | 181 | int i; | 
|  | 182 |  | 
|  | 183 | if (!sdata->u.mesh.rmc) | 
|  | 184 | return; | 
|  | 185 |  | 
|  | 186 | for (i = 0; i < RMC_BUCKETS; i++) { | 
|  | 187 | hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) { | 
|  | 188 | hlist_del(&p->list); | 
|  | 189 | kmem_cache_free(rm_cache, p); | 
|  | 190 | } | 
|  | 191 | } | 
|  | 192 |  | 
|  | 193 | kfree(rmc); | 
|  | 194 | sdata->u.mesh.rmc = NULL; | 
|  | 195 | } | 
|  | 196 |  | 
|  | 197 | /** | 
|  | 198 | * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | 
|  | 199 | * | 
|  | 200 | * @sdata:	interface | 
|  | 201 | * @sa:		source address | 
|  | 202 | * @mesh_hdr:	mesh_header | 
|  | 203 | * | 
|  | 204 | * Returns: 0 if the frame is not in the cache, nonzero otherwise. | 
|  | 205 | * | 
|  | 206 | * Checks using the source address and the mesh sequence number if we have | 
|  | 207 | * received this frame lately. If the frame is not in the cache, it is added to | 
|  | 208 | * it. | 
|  | 209 | */ | 
|  | 210 | int mesh_rmc_check(struct ieee80211_sub_if_data *sdata, | 
|  | 211 | const u8 *sa, struct ieee80211s_hdr *mesh_hdr) | 
|  | 212 | { | 
|  | 213 | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | 214 | u32 seqnum = 0; | 
|  | 215 | int entries = 0; | 
|  | 216 | u8 idx; | 
|  | 217 | struct rmc_entry *p; | 
|  | 218 | struct hlist_node *n; | 
|  | 219 |  | 
|  | 220 | if (!rmc) | 
|  | 221 | return -1; | 
|  | 222 |  | 
|  | 223 | /* Don't care about endianness since only match matters */ | 
|  | 224 | memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | 
|  | 225 | idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; | 
|  | 226 | hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { | 
|  | 227 | ++entries; | 
|  | 228 | if (time_after(jiffies, p->exp_time) || | 
|  | 229 | entries == RMC_QUEUE_MAX_LEN) { | 
|  | 230 | hlist_del(&p->list); | 
|  | 231 | kmem_cache_free(rm_cache, p); | 
|  | 232 | --entries; | 
|  | 233 | } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa)) | 
|  | 234 | return -1; | 
|  | 235 | } | 
|  | 236 |  | 
|  | 237 | p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | 
|  | 238 | if (!p) | 
|  | 239 | return 0; | 
|  | 240 |  | 
|  | 241 | p->seqnum = seqnum; | 
|  | 242 | p->exp_time = jiffies + RMC_TIMEOUT; | 
|  | 243 | memcpy(p->sa, sa, ETH_ALEN); | 
|  | 244 | hlist_add_head(&p->list, &rmc->bucket[idx]); | 
|  | 245 | return 0; | 
|  | 246 | } | 
|  | 247 |  | 
|  | 248 | int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 249 | struct sk_buff *skb) | 
|  | 250 | { | 
|  | 251 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 252 | u8 *pos, neighbors; | 
|  | 253 | u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); | 
|  | 254 |  | 
|  | 255 | if (skb_tailroom(skb) < 2 + meshconf_len) | 
|  | 256 | return -ENOMEM; | 
|  | 257 |  | 
|  | 258 | pos = skb_put(skb, 2 + meshconf_len); | 
|  | 259 | *pos++ = WLAN_EID_MESH_CONFIG; | 
|  | 260 | *pos++ = meshconf_len; | 
|  | 261 |  | 
|  | 262 | /* save a pointer for quick updates in pre-tbtt */ | 
|  | 263 | ifmsh->meshconf_offset = pos - skb->data; | 
|  | 264 |  | 
|  | 265 | /* Active path selection protocol ID */ | 
|  | 266 | *pos++ = ifmsh->mesh_pp_id; | 
|  | 267 | /* Active path selection metric ID   */ | 
|  | 268 | *pos++ = ifmsh->mesh_pm_id; | 
|  | 269 | /* Congestion control mode identifier */ | 
|  | 270 | *pos++ = ifmsh->mesh_cc_id; | 
|  | 271 | /* Synchronization protocol identifier */ | 
|  | 272 | *pos++ = ifmsh->mesh_sp_id; | 
|  | 273 | /* Authentication Protocol identifier */ | 
|  | 274 | *pos++ = ifmsh->mesh_auth_id; | 
|  | 275 | /* Mesh Formation Info - number of neighbors */ | 
|  | 276 | neighbors = atomic_read(&ifmsh->estab_plinks); | 
|  | 277 | neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS); | 
|  | 278 | *pos++ = neighbors << 1; | 
|  | 279 | /* Mesh capability */ | 
|  | 280 | *pos = 0x00; | 
|  | 281 | *pos |= ifmsh->mshcfg.dot11MeshForwarding ? | 
|  | 282 | IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00; | 
|  | 283 | *pos |= ifmsh->accepting_plinks ? | 
|  | 284 | IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; | 
|  | 285 | /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ | 
|  | 286 | *pos |= ifmsh->ps_peers_deep_sleep ? | 
|  | 287 | IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; | 
|  | 288 | return 0; | 
|  | 289 | } | 
|  | 290 |  | 
|  | 291 | int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | 
|  | 292 | { | 
|  | 293 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 294 | u8 *pos; | 
|  | 295 |  | 
|  | 296 | if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) | 
|  | 297 | return -ENOMEM; | 
|  | 298 |  | 
|  | 299 | pos = skb_put(skb, 2 + ifmsh->mesh_id_len); | 
|  | 300 | *pos++ = WLAN_EID_MESH_ID; | 
|  | 301 | *pos++ = ifmsh->mesh_id_len; | 
|  | 302 | if (ifmsh->mesh_id_len) | 
|  | 303 | memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); | 
|  | 304 |  | 
|  | 305 | return 0; | 
|  | 306 | } | 
|  | 307 |  | 
|  | 308 | static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 309 | struct sk_buff *skb) | 
|  | 310 | { | 
|  | 311 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 312 | u8 *pos; | 
|  | 313 |  | 
|  | 314 | /* see IEEE802.11-2012 13.14.6 */ | 
|  | 315 | if (ifmsh->ps_peers_light_sleep == 0 && | 
|  | 316 | ifmsh->ps_peers_deep_sleep == 0 && | 
|  | 317 | ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) | 
|  | 318 | return 0; | 
|  | 319 |  | 
|  | 320 | if (skb_tailroom(skb) < 4) | 
|  | 321 | return -ENOMEM; | 
|  | 322 |  | 
|  | 323 | pos = skb_put(skb, 2 + 2); | 
|  | 324 | *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; | 
|  | 325 | *pos++ = 2; | 
|  | 326 | put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); | 
|  | 327 |  | 
|  | 328 | return 0; | 
|  | 329 | } | 
|  | 330 |  | 
|  | 331 | int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata, | 
|  | 332 | struct sk_buff *skb) | 
|  | 333 | { | 
|  | 334 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 335 | u8 offset, len; | 
|  | 336 | const u8 *data; | 
|  | 337 |  | 
|  | 338 | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | 339 | return 0; | 
|  | 340 |  | 
|  | 341 | /* fast-forward to vendor IEs */ | 
|  | 342 | offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); | 
|  | 343 |  | 
|  | 344 | if (offset < ifmsh->ie_len) { | 
|  | 345 | len = ifmsh->ie_len - offset; | 
|  | 346 | data = ifmsh->ie + offset; | 
|  | 347 | if (skb_tailroom(skb) < len) | 
|  | 348 | return -ENOMEM; | 
|  | 349 | skb_put_data(skb, data, len); | 
|  | 350 | } | 
|  | 351 |  | 
|  | 352 | return 0; | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | 
|  | 356 | { | 
|  | 357 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 358 | u8 len = 0; | 
|  | 359 | const u8 *data; | 
|  | 360 |  | 
|  | 361 | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | 362 | return 0; | 
|  | 363 |  | 
|  | 364 | /* find RSN IE */ | 
|  | 365 | data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len); | 
|  | 366 | if (!data) | 
|  | 367 | return 0; | 
|  | 368 |  | 
|  | 369 | len = data[1] + 2; | 
|  | 370 |  | 
|  | 371 | if (skb_tailroom(skb) < len) | 
|  | 372 | return -ENOMEM; | 
|  | 373 | skb_put_data(skb, data, len); | 
|  | 374 |  | 
|  | 375 | return 0; | 
|  | 376 | } | 
|  | 377 |  | 
|  | 378 | static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 379 | struct sk_buff *skb) | 
|  | 380 | { | 
|  | 381 | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | 382 | struct ieee80211_channel *chan; | 
|  | 383 | u8 *pos; | 
|  | 384 |  | 
|  | 385 | if (skb_tailroom(skb) < 3) | 
|  | 386 | return -ENOMEM; | 
|  | 387 |  | 
|  | 388 | rcu_read_lock(); | 
|  | 389 | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | 390 | if (WARN_ON(!chanctx_conf)) { | 
|  | 391 | rcu_read_unlock(); | 
|  | 392 | return -EINVAL; | 
|  | 393 | } | 
|  | 394 | chan = chanctx_conf->def.chan; | 
|  | 395 | rcu_read_unlock(); | 
|  | 396 |  | 
|  | 397 | pos = skb_put(skb, 2 + 1); | 
|  | 398 | *pos++ = WLAN_EID_DS_PARAMS; | 
|  | 399 | *pos++ = 1; | 
|  | 400 | *pos++ = ieee80211_frequency_to_channel(chan->center_freq); | 
|  | 401 |  | 
|  | 402 | return 0; | 
|  | 403 | } | 
|  | 404 |  | 
|  | 405 | int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 406 | struct sk_buff *skb) | 
|  | 407 | { | 
|  | 408 | struct ieee80211_supported_band *sband; | 
|  | 409 | u8 *pos; | 
|  | 410 |  | 
|  | 411 | sband = ieee80211_get_sband(sdata); | 
|  | 412 | if (!sband) | 
|  | 413 | return -EINVAL; | 
|  | 414 |  | 
|  | 415 | if (!sband->ht_cap.ht_supported || | 
|  | 416 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | 417 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | 418 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | 419 | return 0; | 
|  | 420 |  | 
|  | 421 | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) | 
|  | 422 | return -ENOMEM; | 
|  | 423 |  | 
|  | 424 | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); | 
|  | 425 | ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); | 
|  | 426 |  | 
|  | 427 | return 0; | 
|  | 428 | } | 
|  | 429 |  | 
|  | 430 | int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 431 | struct sk_buff *skb) | 
|  | 432 | { | 
|  | 433 | struct ieee80211_local *local = sdata->local; | 
|  | 434 | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | 435 | struct ieee80211_channel *channel; | 
|  | 436 | struct ieee80211_supported_band *sband; | 
|  | 437 | struct ieee80211_sta_ht_cap *ht_cap; | 
|  | 438 | u8 *pos; | 
|  | 439 |  | 
|  | 440 | rcu_read_lock(); | 
|  | 441 | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | 442 | if (WARN_ON(!chanctx_conf)) { | 
|  | 443 | rcu_read_unlock(); | 
|  | 444 | return -EINVAL; | 
|  | 445 | } | 
|  | 446 | channel = chanctx_conf->def.chan; | 
|  | 447 | rcu_read_unlock(); | 
|  | 448 |  | 
|  | 449 | sband = local->hw.wiphy->bands[channel->band]; | 
|  | 450 | ht_cap = &sband->ht_cap; | 
|  | 451 |  | 
|  | 452 | if (!ht_cap->ht_supported || | 
|  | 453 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | 454 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | 455 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | 456 | return 0; | 
|  | 457 |  | 
|  | 458 | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation)) | 
|  | 459 | return -ENOMEM; | 
|  | 460 |  | 
|  | 461 | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation)); | 
|  | 462 | ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef, | 
|  | 463 | sdata->vif.bss_conf.ht_operation_mode, | 
|  | 464 | false); | 
|  | 465 |  | 
|  | 466 | return 0; | 
|  | 467 | } | 
|  | 468 |  | 
|  | 469 | int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 470 | struct sk_buff *skb) | 
|  | 471 | { | 
|  | 472 | struct ieee80211_supported_band *sband; | 
|  | 473 | u8 *pos; | 
|  | 474 |  | 
|  | 475 | sband = ieee80211_get_sband(sdata); | 
|  | 476 | if (!sband) | 
|  | 477 | return -EINVAL; | 
|  | 478 |  | 
|  | 479 | if (!sband->vht_cap.vht_supported || | 
|  | 480 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | 481 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | 482 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | 483 | return 0; | 
|  | 484 |  | 
|  | 485 | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap)) | 
|  | 486 | return -ENOMEM; | 
|  | 487 |  | 
|  | 488 | pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap)); | 
|  | 489 | ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap); | 
|  | 490 |  | 
|  | 491 | return 0; | 
|  | 492 | } | 
|  | 493 |  | 
|  | 494 | int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata, | 
|  | 495 | struct sk_buff *skb) | 
|  | 496 | { | 
|  | 497 | struct ieee80211_local *local = sdata->local; | 
|  | 498 | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | 499 | struct ieee80211_channel *channel; | 
|  | 500 | struct ieee80211_supported_band *sband; | 
|  | 501 | struct ieee80211_sta_vht_cap *vht_cap; | 
|  | 502 | u8 *pos; | 
|  | 503 |  | 
|  | 504 | rcu_read_lock(); | 
|  | 505 | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | 506 | if (WARN_ON(!chanctx_conf)) { | 
|  | 507 | rcu_read_unlock(); | 
|  | 508 | return -EINVAL; | 
|  | 509 | } | 
|  | 510 | channel = chanctx_conf->def.chan; | 
|  | 511 | rcu_read_unlock(); | 
|  | 512 |  | 
|  | 513 | sband = local->hw.wiphy->bands[channel->band]; | 
|  | 514 | vht_cap = &sband->vht_cap; | 
|  | 515 |  | 
|  | 516 | if (!vht_cap->vht_supported || | 
|  | 517 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | 518 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | 519 | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | 520 | return 0; | 
|  | 521 |  | 
|  | 522 | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation)) | 
|  | 523 | return -ENOMEM; | 
|  | 524 |  | 
|  | 525 | pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation)); | 
|  | 526 | ieee80211_ie_build_vht_oper(pos, vht_cap, | 
|  | 527 | &sdata->vif.bss_conf.chandef); | 
|  | 528 |  | 
|  | 529 | return 0; | 
|  | 530 | } | 
|  | 531 |  | 
|  | 532 | static void ieee80211_mesh_path_timer(struct timer_list *t) | 
|  | 533 | { | 
|  | 534 | struct ieee80211_sub_if_data *sdata = | 
|  | 535 | from_timer(sdata, t, u.mesh.mesh_path_timer); | 
|  | 536 |  | 
|  | 537 | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | 538 | } | 
|  | 539 |  | 
|  | 540 | static void ieee80211_mesh_path_root_timer(struct timer_list *t) | 
|  | 541 | { | 
|  | 542 | struct ieee80211_sub_if_data *sdata = | 
|  | 543 | from_timer(sdata, t, u.mesh.mesh_path_root_timer); | 
|  | 544 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 545 |  | 
|  | 546 | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | 547 |  | 
|  | 548 | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | 549 | } | 
|  | 550 |  | 
|  | 551 | void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) | 
|  | 552 | { | 
|  | 553 | if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT) | 
|  | 554 | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | 555 | else { | 
|  | 556 | clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | 557 | /* stop running timer */ | 
|  | 558 | del_timer_sync(&ifmsh->mesh_path_root_timer); | 
|  | 559 | } | 
|  | 560 | } | 
|  | 561 |  | 
|  | 562 | /** | 
|  | 563 | * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame | 
|  | 564 | * @hdr:	802.11 frame header | 
|  | 565 | * @fc:		frame control field | 
|  | 566 | * @meshda:	destination address in the mesh | 
|  | 567 | * @meshsa:	source address address in the mesh.  Same as TA, as frame is | 
|  | 568 | *              locally originated. | 
|  | 569 | * | 
|  | 570 | * Return the length of the 802.11 (does not include a mesh control header) | 
|  | 571 | */ | 
|  | 572 | int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, | 
|  | 573 | const u8 *meshda, const u8 *meshsa) | 
|  | 574 | { | 
|  | 575 | if (is_multicast_ether_addr(meshda)) { | 
|  | 576 | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | 577 | /* DA TA SA */ | 
|  | 578 | memcpy(hdr->addr1, meshda, ETH_ALEN); | 
|  | 579 | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | 580 | memcpy(hdr->addr3, meshsa, ETH_ALEN); | 
|  | 581 | return 24; | 
|  | 582 | } else { | 
|  | 583 | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
|  | 584 | /* RA TA DA SA */ | 
|  | 585 | eth_zero_addr(hdr->addr1);   /* RA is resolved later */ | 
|  | 586 | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | 587 | memcpy(hdr->addr3, meshda, ETH_ALEN); | 
|  | 588 | memcpy(hdr->addr4, meshsa, ETH_ALEN); | 
|  | 589 | return 30; | 
|  | 590 | } | 
|  | 591 | } | 
|  | 592 |  | 
|  | 593 | /** | 
|  | 594 | * ieee80211_new_mesh_header - create a new mesh header | 
|  | 595 | * @sdata:	mesh interface to be used | 
|  | 596 | * @meshhdr:    uninitialized mesh header | 
|  | 597 | * @addr4or5:   1st address in the ae header, which may correspond to address 4 | 
|  | 598 | *              (if addr6 is NULL) or address 5 (if addr6 is present). It may | 
|  | 599 | *              be NULL. | 
|  | 600 | * @addr6:	2nd address in the ae header, which corresponds to addr6 of the | 
|  | 601 | *              mesh frame | 
|  | 602 | * | 
|  | 603 | * Return the header length. | 
|  | 604 | */ | 
|  | 605 | unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata, | 
|  | 606 | struct ieee80211s_hdr *meshhdr, | 
|  | 607 | const char *addr4or5, const char *addr6) | 
|  | 608 | { | 
|  | 609 | if (WARN_ON(!addr4or5 && addr6)) | 
|  | 610 | return 0; | 
|  | 611 |  | 
|  | 612 | memset(meshhdr, 0, sizeof(*meshhdr)); | 
|  | 613 |  | 
|  | 614 | meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | 
|  | 615 |  | 
|  | 616 | /* FIXME: racy -- TX on multiple queues can be concurrent */ | 
|  | 617 | put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); | 
|  | 618 | sdata->u.mesh.mesh_seqnum++; | 
|  | 619 |  | 
|  | 620 | if (addr4or5 && !addr6) { | 
|  | 621 | meshhdr->flags |= MESH_FLAGS_AE_A4; | 
|  | 622 | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | 623 | return 2 * ETH_ALEN; | 
|  | 624 | } else if (addr4or5 && addr6) { | 
|  | 625 | meshhdr->flags |= MESH_FLAGS_AE_A5_A6; | 
|  | 626 | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | 627 | memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); | 
|  | 628 | return 3 * ETH_ALEN; | 
|  | 629 | } | 
|  | 630 |  | 
|  | 631 | return ETH_ALEN; | 
|  | 632 | } | 
|  | 633 |  | 
|  | 634 | static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata) | 
|  | 635 | { | 
|  | 636 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 637 | u32 changed; | 
|  | 638 |  | 
|  | 639 | if (ifmsh->mshcfg.plink_timeout > 0) | 
|  | 640 | ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ); | 
|  | 641 | mesh_path_expire(sdata); | 
|  | 642 |  | 
|  | 643 | changed = mesh_accept_plinks_update(sdata); | 
|  | 644 | ieee80211_mbss_info_change_notify(sdata, changed); | 
|  | 645 |  | 
|  | 646 | mod_timer(&ifmsh->housekeeping_timer, | 
|  | 647 | round_jiffies(jiffies + | 
|  | 648 | IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); | 
|  | 649 | } | 
|  | 650 |  | 
|  | 651 | static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) | 
|  | 652 | { | 
|  | 653 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 654 | u32 interval; | 
|  | 655 |  | 
|  | 656 | mesh_path_tx_root_frame(sdata); | 
|  | 657 |  | 
|  | 658 | if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) | 
|  | 659 | interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; | 
|  | 660 | else | 
|  | 661 | interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; | 
|  | 662 |  | 
|  | 663 | mod_timer(&ifmsh->mesh_path_root_timer, | 
|  | 664 | round_jiffies(TU_TO_EXP_TIME(interval))); | 
|  | 665 | } | 
|  | 666 |  | 
|  | 667 | static int | 
|  | 668 | ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) | 
|  | 669 | { | 
|  | 670 | struct beacon_data *bcn; | 
|  | 671 | int head_len, tail_len; | 
|  | 672 | struct sk_buff *skb; | 
|  | 673 | struct ieee80211_mgmt *mgmt; | 
|  | 674 | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | 675 | struct mesh_csa_settings *csa; | 
|  | 676 | enum nl80211_band band; | 
|  | 677 | u8 *pos; | 
|  | 678 | struct ieee80211_sub_if_data *sdata; | 
|  | 679 | int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon); | 
|  | 680 |  | 
|  | 681 | sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); | 
|  | 682 | rcu_read_lock(); | 
|  | 683 | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | 684 | band = chanctx_conf->def.chan->band; | 
|  | 685 | rcu_read_unlock(); | 
|  | 686 |  | 
|  | 687 | head_len = hdr_len + | 
|  | 688 | 2 + /* NULL SSID */ | 
|  | 689 | /* Channel Switch Announcement */ | 
|  | 690 | 2 + sizeof(struct ieee80211_channel_sw_ie) + | 
|  | 691 | /* Mesh Channel Switch Parameters */ | 
|  | 692 | 2 + sizeof(struct ieee80211_mesh_chansw_params_ie) + | 
|  | 693 | /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | 
|  | 694 | 2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) + | 
|  | 695 | 2 + sizeof(struct ieee80211_sec_chan_offs_ie) + | 
|  | 696 | 2 + 8 + /* supported rates */ | 
|  | 697 | 2 + 3; /* DS params */ | 
|  | 698 | tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + | 
|  | 699 | 2 + sizeof(struct ieee80211_ht_cap) + | 
|  | 700 | 2 + sizeof(struct ieee80211_ht_operation) + | 
|  | 701 | 2 + ifmsh->mesh_id_len + | 
|  | 702 | 2 + sizeof(struct ieee80211_meshconf_ie) + | 
|  | 703 | 2 + sizeof(__le16) + /* awake window */ | 
|  | 704 | 2 + sizeof(struct ieee80211_vht_cap) + | 
|  | 705 | 2 + sizeof(struct ieee80211_vht_operation) + | 
|  | 706 | ifmsh->ie_len; | 
|  | 707 |  | 
|  | 708 | bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); | 
|  | 709 | /* need an skb for IE builders to operate on */ | 
|  | 710 | skb = dev_alloc_skb(max(head_len, tail_len)); | 
|  | 711 |  | 
|  | 712 | if (!bcn || !skb) | 
|  | 713 | goto out_free; | 
|  | 714 |  | 
|  | 715 | /* | 
|  | 716 | * pointers go into the block we allocated, | 
|  | 717 | * memory is | beacon_data | head | tail | | 
|  | 718 | */ | 
|  | 719 | bcn->head = ((u8 *) bcn) + sizeof(*bcn); | 
|  | 720 |  | 
|  | 721 | /* fill in the head */ | 
|  | 722 | mgmt = skb_put_zero(skb, hdr_len); | 
|  | 723 | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | 724 | IEEE80211_STYPE_BEACON); | 
|  | 725 | eth_broadcast_addr(mgmt->da); | 
|  | 726 | memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
|  | 727 | memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | 
|  | 728 | ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); | 
|  | 729 | mgmt->u.beacon.beacon_int = | 
|  | 730 | cpu_to_le16(sdata->vif.bss_conf.beacon_int); | 
|  | 731 | mgmt->u.beacon.capab_info |= cpu_to_le16( | 
|  | 732 | sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); | 
|  | 733 |  | 
|  | 734 | pos = skb_put(skb, 2); | 
|  | 735 | *pos++ = WLAN_EID_SSID; | 
|  | 736 | *pos++ = 0x0; | 
|  | 737 |  | 
|  | 738 | rcu_read_lock(); | 
|  | 739 | csa = rcu_dereference(ifmsh->csa); | 
|  | 740 | if (csa) { | 
|  | 741 | enum nl80211_channel_type ct; | 
|  | 742 | struct cfg80211_chan_def *chandef; | 
|  | 743 | int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) + | 
|  | 744 | 2 + sizeof(struct ieee80211_mesh_chansw_params_ie); | 
|  | 745 |  | 
|  | 746 | pos = skb_put_zero(skb, ie_len); | 
|  | 747 | *pos++ = WLAN_EID_CHANNEL_SWITCH; | 
|  | 748 | *pos++ = 3; | 
|  | 749 | *pos++ = 0x0; | 
|  | 750 | *pos++ = ieee80211_frequency_to_channel( | 
|  | 751 | csa->settings.chandef.chan->center_freq); | 
|  | 752 | bcn->csa_current_counter = csa->settings.count; | 
|  | 753 | bcn->csa_counter_offsets[0] = hdr_len + 6; | 
|  | 754 | *pos++ = csa->settings.count; | 
|  | 755 | *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; | 
|  | 756 | *pos++ = 6; | 
|  | 757 | if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { | 
|  | 758 | *pos++ = ifmsh->mshcfg.dot11MeshTTL; | 
|  | 759 | *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | 
|  | 760 | } else { | 
|  | 761 | *pos++ = ifmsh->chsw_ttl; | 
|  | 762 | } | 
|  | 763 | *pos++ |= csa->settings.block_tx ? | 
|  | 764 | WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00; | 
|  | 765 | put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos); | 
|  | 766 | pos += 2; | 
|  | 767 | put_unaligned_le16(ifmsh->pre_value, pos); | 
|  | 768 | pos += 2; | 
|  | 769 |  | 
|  | 770 | switch (csa->settings.chandef.width) { | 
|  | 771 | case NL80211_CHAN_WIDTH_40: | 
|  | 772 | ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie); | 
|  | 773 | pos = skb_put_zero(skb, ie_len); | 
|  | 774 |  | 
|  | 775 | *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */ | 
|  | 776 | *pos++ = 1;				    /* len */ | 
|  | 777 | ct = cfg80211_get_chandef_type(&csa->settings.chandef); | 
|  | 778 | if (ct == NL80211_CHAN_HT40PLUS) | 
|  | 779 | *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | 
|  | 780 | else | 
|  | 781 | *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW; | 
|  | 782 | break; | 
|  | 783 | case NL80211_CHAN_WIDTH_80: | 
|  | 784 | case NL80211_CHAN_WIDTH_80P80: | 
|  | 785 | case NL80211_CHAN_WIDTH_160: | 
|  | 786 | /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | 
|  | 787 | ie_len = 2 + 2 + | 
|  | 788 | sizeof(struct ieee80211_wide_bw_chansw_ie); | 
|  | 789 | pos = skb_put_zero(skb, ie_len); | 
|  | 790 |  | 
|  | 791 | *pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */ | 
|  | 792 | *pos++ = 5;				  /* len */ | 
|  | 793 | /* put sub IE */ | 
|  | 794 | chandef = &csa->settings.chandef; | 
|  | 795 | ieee80211_ie_build_wide_bw_cs(pos, chandef); | 
|  | 796 | break; | 
|  | 797 | default: | 
|  | 798 | break; | 
|  | 799 | } | 
|  | 800 | } | 
|  | 801 | rcu_read_unlock(); | 
|  | 802 |  | 
|  | 803 | if (ieee80211_add_srates_ie(sdata, skb, true, band) || | 
|  | 804 | mesh_add_ds_params_ie(sdata, skb)) | 
|  | 805 | goto out_free; | 
|  | 806 |  | 
|  | 807 | bcn->head_len = skb->len; | 
|  | 808 | memcpy(bcn->head, skb->data, bcn->head_len); | 
|  | 809 |  | 
|  | 810 | /* now the tail */ | 
|  | 811 | skb_trim(skb, 0); | 
|  | 812 | bcn->tail = bcn->head + bcn->head_len; | 
|  | 813 |  | 
|  | 814 | if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || | 
|  | 815 | mesh_add_rsn_ie(sdata, skb) || | 
|  | 816 | mesh_add_ht_cap_ie(sdata, skb) || | 
|  | 817 | mesh_add_ht_oper_ie(sdata, skb) || | 
|  | 818 | mesh_add_meshid_ie(sdata, skb) || | 
|  | 819 | mesh_add_meshconf_ie(sdata, skb) || | 
|  | 820 | mesh_add_awake_window_ie(sdata, skb) || | 
|  | 821 | mesh_add_vht_cap_ie(sdata, skb) || | 
|  | 822 | mesh_add_vht_oper_ie(sdata, skb) || | 
|  | 823 | mesh_add_vendor_ies(sdata, skb)) | 
|  | 824 | goto out_free; | 
|  | 825 |  | 
|  | 826 | bcn->tail_len = skb->len; | 
|  | 827 | memcpy(bcn->tail, skb->data, bcn->tail_len); | 
|  | 828 | bcn->meshconf = (struct ieee80211_meshconf_ie *) | 
|  | 829 | (bcn->tail + ifmsh->meshconf_offset); | 
|  | 830 |  | 
|  | 831 | dev_kfree_skb(skb); | 
|  | 832 | rcu_assign_pointer(ifmsh->beacon, bcn); | 
|  | 833 | return 0; | 
|  | 834 | out_free: | 
|  | 835 | kfree(bcn); | 
|  | 836 | dev_kfree_skb(skb); | 
|  | 837 | return -ENOMEM; | 
|  | 838 | } | 
|  | 839 |  | 
|  | 840 | static int | 
|  | 841 | ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata) | 
|  | 842 | { | 
|  | 843 | struct beacon_data *old_bcn; | 
|  | 844 | int ret; | 
|  | 845 |  | 
|  | 846 | old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon, | 
|  | 847 | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | 848 | ret = ieee80211_mesh_build_beacon(&sdata->u.mesh); | 
|  | 849 | if (ret) | 
|  | 850 | /* just reuse old beacon */ | 
|  | 851 | return ret; | 
|  | 852 |  | 
|  | 853 | if (old_bcn) | 
|  | 854 | kfree_rcu(old_bcn, rcu_head); | 
|  | 855 | return 0; | 
|  | 856 | } | 
|  | 857 |  | 
|  | 858 | void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, | 
|  | 859 | u32 changed) | 
|  | 860 | { | 
|  | 861 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 862 | unsigned long bits = changed; | 
|  | 863 | u32 bit; | 
|  | 864 |  | 
|  | 865 | if (!bits) | 
|  | 866 | return; | 
|  | 867 |  | 
|  | 868 | /* if we race with running work, worst case this work becomes a noop */ | 
|  | 869 | for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE) | 
|  | 870 | set_bit(bit, &ifmsh->mbss_changed); | 
|  | 871 | set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags); | 
|  | 872 | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | 873 | } | 
|  | 874 |  | 
|  | 875 | int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | 876 | { | 
|  | 877 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 878 | struct ieee80211_local *local = sdata->local; | 
|  | 879 | u32 changed = BSS_CHANGED_BEACON | | 
|  | 880 | BSS_CHANGED_BEACON_ENABLED | | 
|  | 881 | BSS_CHANGED_HT | | 
|  | 882 | BSS_CHANGED_BASIC_RATES | | 
|  | 883 | BSS_CHANGED_BEACON_INT | | 
|  | 884 | BSS_CHANGED_MCAST_RATE; | 
|  | 885 |  | 
|  | 886 | local->fif_other_bss++; | 
|  | 887 | /* mesh ifaces must set allmulti to forward mcast traffic */ | 
|  | 888 | atomic_inc(&local->iff_allmultis); | 
|  | 889 | ieee80211_configure_filter(local); | 
|  | 890 |  | 
|  | 891 | ifmsh->mesh_cc_id = 0;	/* Disabled */ | 
|  | 892 | /* register sync ops from extensible synchronization framework */ | 
|  | 893 | ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); | 
|  | 894 | ifmsh->sync_offset_clockdrift_max = 0; | 
|  | 895 | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  | 896 | ieee80211_mesh_root_setup(ifmsh); | 
|  | 897 | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | 898 | sdata->vif.bss_conf.ht_operation_mode = | 
|  | 899 | ifmsh->mshcfg.ht_opmode; | 
|  | 900 | sdata->vif.bss_conf.enable_beacon = true; | 
|  | 901 |  | 
|  | 902 | changed |= ieee80211_mps_local_status_update(sdata); | 
|  | 903 |  | 
|  | 904 | if (ieee80211_mesh_build_beacon(ifmsh)) { | 
|  | 905 | ieee80211_stop_mesh(sdata); | 
|  | 906 | return -ENOMEM; | 
|  | 907 | } | 
|  | 908 |  | 
|  | 909 | ieee80211_recalc_dtim(local, sdata); | 
|  | 910 | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | 911 |  | 
|  | 912 | netif_carrier_on(sdata->dev); | 
|  | 913 | return 0; | 
|  | 914 | } | 
|  | 915 |  | 
|  | 916 | void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | 917 | { | 
|  | 918 | struct ieee80211_local *local = sdata->local; | 
|  | 919 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 920 | struct beacon_data *bcn; | 
|  | 921 |  | 
|  | 922 | netif_carrier_off(sdata->dev); | 
|  | 923 |  | 
|  | 924 | /* flush STAs and mpaths on this iface */ | 
|  | 925 | sta_info_flush(sdata); | 
|  | 926 | ieee80211_free_keys(sdata, true); | 
|  | 927 | mesh_path_flush_by_iface(sdata); | 
|  | 928 |  | 
|  | 929 | /* stop the beacon */ | 
|  | 930 | ifmsh->mesh_id_len = 0; | 
|  | 931 | sdata->vif.bss_conf.enable_beacon = false; | 
|  | 932 | clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | 
|  | 933 | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
|  | 934 |  | 
|  | 935 | /* remove beacon */ | 
|  | 936 | bcn = rcu_dereference_protected(ifmsh->beacon, | 
|  | 937 | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | 938 | RCU_INIT_POINTER(ifmsh->beacon, NULL); | 
|  | 939 | kfree_rcu(bcn, rcu_head); | 
|  | 940 |  | 
|  | 941 | /* free all potentially still buffered group-addressed frames */ | 
|  | 942 | local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); | 
|  | 943 | skb_queue_purge(&ifmsh->ps.bc_buf); | 
|  | 944 |  | 
|  | 945 | del_timer_sync(&sdata->u.mesh.housekeeping_timer); | 
|  | 946 | del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); | 
|  | 947 | del_timer_sync(&sdata->u.mesh.mesh_path_timer); | 
|  | 948 |  | 
|  | 949 | /* clear any mesh work (for next join) we may have accrued */ | 
|  | 950 | ifmsh->wrkq_flags = 0; | 
|  | 951 | ifmsh->mbss_changed = 0; | 
|  | 952 |  | 
|  | 953 | local->fif_other_bss--; | 
|  | 954 | atomic_dec(&local->iff_allmultis); | 
|  | 955 | ieee80211_configure_filter(local); | 
|  | 956 | } | 
|  | 957 |  | 
|  | 958 | static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata) | 
|  | 959 | { | 
|  | 960 | int err; | 
|  | 961 |  | 
|  | 962 | /* if the current channel is a DFS channel, mark the channel as | 
|  | 963 | * unavailable. | 
|  | 964 | */ | 
|  | 965 | err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | 
|  | 966 | &sdata->vif.bss_conf.chandef, | 
|  | 967 | NL80211_IFTYPE_MESH_POINT); | 
|  | 968 | if (err > 0) | 
|  | 969 | cfg80211_radar_event(sdata->local->hw.wiphy, | 
|  | 970 | &sdata->vif.bss_conf.chandef, GFP_ATOMIC); | 
|  | 971 | } | 
|  | 972 |  | 
|  | 973 | static bool | 
|  | 974 | ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, | 
|  | 975 | struct ieee802_11_elems *elems, bool beacon) | 
|  | 976 | { | 
|  | 977 | struct cfg80211_csa_settings params; | 
|  | 978 | struct ieee80211_csa_ie csa_ie; | 
|  | 979 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 980 | struct ieee80211_supported_band *sband; | 
|  | 981 | int err; | 
|  | 982 | u32 sta_flags; | 
|  | 983 |  | 
|  | 984 | sdata_assert_lock(sdata); | 
|  | 985 |  | 
|  | 986 | sband = ieee80211_get_sband(sdata); | 
|  | 987 | if (!sband) | 
|  | 988 | return false; | 
|  | 989 |  | 
|  | 990 | sta_flags = 0; | 
|  | 991 | switch (sdata->vif.bss_conf.chandef.width) { | 
|  | 992 | case NL80211_CHAN_WIDTH_20_NOHT: | 
|  | 993 | sta_flags |= IEEE80211_STA_DISABLE_HT; | 
|  | 994 | /* fall through */ | 
|  | 995 | case NL80211_CHAN_WIDTH_20: | 
|  | 996 | sta_flags |= IEEE80211_STA_DISABLE_40MHZ; | 
|  | 997 | /* fall through */ | 
|  | 998 | case NL80211_CHAN_WIDTH_40: | 
|  | 999 | sta_flags |= IEEE80211_STA_DISABLE_VHT; | 
|  | 1000 | break; | 
|  | 1001 | default: | 
|  | 1002 | break; | 
|  | 1003 | } | 
|  | 1004 |  | 
|  | 1005 | memset(¶ms, 0, sizeof(params)); | 
|  | 1006 | err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band, | 
|  | 1007 | sta_flags, sdata->vif.addr, | 
|  | 1008 | &csa_ie); | 
|  | 1009 | if (err < 0) | 
|  | 1010 | return false; | 
|  | 1011 | if (err) | 
|  | 1012 | return false; | 
|  | 1013 |  | 
|  | 1014 | /* Mark the channel unavailable if the reason for the switch is | 
|  | 1015 | * regulatory. | 
|  | 1016 | */ | 
|  | 1017 | if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY) | 
|  | 1018 | ieee80211_mesh_csa_mark_radar(sdata); | 
|  | 1019 |  | 
|  | 1020 | params.chandef = csa_ie.chandef; | 
|  | 1021 | params.count = csa_ie.count; | 
|  | 1022 |  | 
|  | 1023 | if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, | 
|  | 1024 | IEEE80211_CHAN_DISABLED) || | 
|  | 1025 | !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, ¶ms.chandef, | 
|  | 1026 | NL80211_IFTYPE_MESH_POINT)) { | 
|  | 1027 | sdata_info(sdata, | 
|  | 1028 | "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | 
|  | 1029 | sdata->vif.addr, | 
|  | 1030 | params.chandef.chan->center_freq, | 
|  | 1031 | params.chandef.width, | 
|  | 1032 | params.chandef.center_freq1, | 
|  | 1033 | params.chandef.center_freq2); | 
|  | 1034 | return false; | 
|  | 1035 | } | 
|  | 1036 |  | 
|  | 1037 | err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | 
|  | 1038 | ¶ms.chandef, | 
|  | 1039 | NL80211_IFTYPE_MESH_POINT); | 
|  | 1040 | if (err < 0) | 
|  | 1041 | return false; | 
|  | 1042 | if (err > 0 && !ifmsh->userspace_handles_dfs) { | 
|  | 1043 | sdata_info(sdata, | 
|  | 1044 | "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | 
|  | 1045 | sdata->vif.addr, | 
|  | 1046 | params.chandef.chan->center_freq, | 
|  | 1047 | params.chandef.width, | 
|  | 1048 | params.chandef.center_freq1, | 
|  | 1049 | params.chandef.center_freq2); | 
|  | 1050 | return false; | 
|  | 1051 | } | 
|  | 1052 |  | 
|  | 1053 | params.radar_required = err; | 
|  | 1054 |  | 
|  | 1055 | if (cfg80211_chandef_identical(¶ms.chandef, | 
|  | 1056 | &sdata->vif.bss_conf.chandef)) { | 
|  | 1057 | mcsa_dbg(sdata, | 
|  | 1058 | "received csa with an identical chandef, ignoring\n"); | 
|  | 1059 | return true; | 
|  | 1060 | } | 
|  | 1061 |  | 
|  | 1062 | mcsa_dbg(sdata, | 
|  | 1063 | "received channel switch announcement to go to channel %d MHz\n", | 
|  | 1064 | params.chandef.chan->center_freq); | 
|  | 1065 |  | 
|  | 1066 | params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT; | 
|  | 1067 | if (beacon) { | 
|  | 1068 | ifmsh->chsw_ttl = csa_ie.ttl - 1; | 
|  | 1069 | if (ifmsh->pre_value >= csa_ie.pre_value) | 
|  | 1070 | return false; | 
|  | 1071 | ifmsh->pre_value = csa_ie.pre_value; | 
|  | 1072 | } | 
|  | 1073 |  | 
|  | 1074 | if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL) | 
|  | 1075 | return false; | 
|  | 1076 |  | 
|  | 1077 | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; | 
|  | 1078 |  | 
|  | 1079 | if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, | 
|  | 1080 | ¶ms) < 0) | 
|  | 1081 | return false; | 
|  | 1082 |  | 
|  | 1083 | return true; | 
|  | 1084 | } | 
|  | 1085 |  | 
|  | 1086 | static void | 
|  | 1087 | ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, | 
|  | 1088 | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | 1089 | { | 
|  | 1090 | struct ieee80211_local *local = sdata->local; | 
|  | 1091 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1092 | struct sk_buff *presp; | 
|  | 1093 | struct beacon_data *bcn; | 
|  | 1094 | struct ieee80211_mgmt *hdr; | 
|  | 1095 | struct ieee802_11_elems elems; | 
|  | 1096 | size_t baselen; | 
|  | 1097 | u8 *pos; | 
|  | 1098 |  | 
|  | 1099 | pos = mgmt->u.probe_req.variable; | 
|  | 1100 | baselen = (u8 *) pos - (u8 *) mgmt; | 
|  | 1101 | if (baselen > len) | 
|  | 1102 | return; | 
|  | 1103 |  | 
|  | 1104 | ieee802_11_parse_elems(pos, len - baselen, false, &elems); | 
|  | 1105 |  | 
|  | 1106 | if (!elems.mesh_id) | 
|  | 1107 | return; | 
|  | 1108 |  | 
|  | 1109 | /* 802.11-2012 10.1.4.3.2 */ | 
|  | 1110 | if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && | 
|  | 1111 | !is_broadcast_ether_addr(mgmt->da)) || | 
|  | 1112 | elems.ssid_len != 0) | 
|  | 1113 | return; | 
|  | 1114 |  | 
|  | 1115 | if (elems.mesh_id_len != 0 && | 
|  | 1116 | (elems.mesh_id_len != ifmsh->mesh_id_len || | 
|  | 1117 | memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) | 
|  | 1118 | return; | 
|  | 1119 |  | 
|  | 1120 | rcu_read_lock(); | 
|  | 1121 | bcn = rcu_dereference(ifmsh->beacon); | 
|  | 1122 |  | 
|  | 1123 | if (!bcn) | 
|  | 1124 | goto out; | 
|  | 1125 |  | 
|  | 1126 | presp = dev_alloc_skb(local->tx_headroom + | 
|  | 1127 | bcn->head_len + bcn->tail_len); | 
|  | 1128 | if (!presp) | 
|  | 1129 | goto out; | 
|  | 1130 |  | 
|  | 1131 | skb_reserve(presp, local->tx_headroom); | 
|  | 1132 | skb_put_data(presp, bcn->head, bcn->head_len); | 
|  | 1133 | skb_put_data(presp, bcn->tail, bcn->tail_len); | 
|  | 1134 | hdr = (struct ieee80211_mgmt *) presp->data; | 
|  | 1135 | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | 1136 | IEEE80211_STYPE_PROBE_RESP); | 
|  | 1137 | memcpy(hdr->da, mgmt->sa, ETH_ALEN); | 
|  | 1138 | IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | 1139 | ieee80211_tx_skb(sdata, presp); | 
|  | 1140 | out: | 
|  | 1141 | rcu_read_unlock(); | 
|  | 1142 | } | 
|  | 1143 |  | 
|  | 1144 | static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, | 
|  | 1145 | u16 stype, | 
|  | 1146 | struct ieee80211_mgmt *mgmt, | 
|  | 1147 | size_t len, | 
|  | 1148 | struct ieee80211_rx_status *rx_status) | 
|  | 1149 | { | 
|  | 1150 | struct ieee80211_local *local = sdata->local; | 
|  | 1151 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1152 | struct ieee802_11_elems elems; | 
|  | 1153 | struct ieee80211_channel *channel; | 
|  | 1154 | size_t baselen; | 
|  | 1155 | int freq; | 
|  | 1156 | enum nl80211_band band = rx_status->band; | 
|  | 1157 |  | 
|  | 1158 | /* ignore ProbeResp to foreign address */ | 
|  | 1159 | if (stype == IEEE80211_STYPE_PROBE_RESP && | 
|  | 1160 | !ether_addr_equal(mgmt->da, sdata->vif.addr)) | 
|  | 1161 | return; | 
|  | 1162 |  | 
|  | 1163 | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | 1164 | if (baselen > len) | 
|  | 1165 | return; | 
|  | 1166 |  | 
|  | 1167 | ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
|  | 1168 | false, &elems); | 
|  | 1169 |  | 
|  | 1170 | /* ignore non-mesh or secure / unsecure mismatch */ | 
|  | 1171 | if ((!elems.mesh_id || !elems.mesh_config) || | 
|  | 1172 | (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) || | 
|  | 1173 | (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)) | 
|  | 1174 | return; | 
|  | 1175 |  | 
|  | 1176 | if (elems.ds_params) | 
|  | 1177 | freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); | 
|  | 1178 | else | 
|  | 1179 | freq = rx_status->freq; | 
|  | 1180 |  | 
|  | 1181 | channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
|  | 1182 |  | 
|  | 1183 | if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | 1184 | return; | 
|  | 1185 |  | 
|  | 1186 | if (mesh_matches_local(sdata, &elems)) { | 
|  | 1187 | mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n", | 
|  | 1188 | sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal); | 
|  | 1189 | if (!sdata->u.mesh.user_mpm || | 
|  | 1190 | sdata->u.mesh.mshcfg.rssi_threshold == 0 || | 
|  | 1191 | sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal) | 
|  | 1192 | mesh_neighbour_update(sdata, mgmt->sa, &elems); | 
|  | 1193 | } | 
|  | 1194 |  | 
|  | 1195 | if (ifmsh->sync_ops) | 
|  | 1196 | ifmsh->sync_ops->rx_bcn_presp(sdata, | 
|  | 1197 | stype, mgmt, &elems, rx_status); | 
|  | 1198 |  | 
|  | 1199 | if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && | 
|  | 1200 | !sdata->vif.csa_active) | 
|  | 1201 | ieee80211_mesh_process_chnswitch(sdata, &elems, true); | 
|  | 1202 | } | 
|  | 1203 |  | 
|  | 1204 | int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata) | 
|  | 1205 | { | 
|  | 1206 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1207 | struct mesh_csa_settings *tmp_csa_settings; | 
|  | 1208 | int ret = 0; | 
|  | 1209 | int changed = 0; | 
|  | 1210 |  | 
|  | 1211 | /* Reset the TTL value and Initiator flag */ | 
|  | 1212 | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
|  | 1213 | ifmsh->chsw_ttl = 0; | 
|  | 1214 |  | 
|  | 1215 | /* Remove the CSA and MCSP elements from the beacon */ | 
|  | 1216 | tmp_csa_settings = rcu_dereference_protected(ifmsh->csa, | 
|  | 1217 | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | 1218 | RCU_INIT_POINTER(ifmsh->csa, NULL); | 
|  | 1219 | if (tmp_csa_settings) | 
|  | 1220 | kfree_rcu(tmp_csa_settings, rcu_head); | 
|  | 1221 | ret = ieee80211_mesh_rebuild_beacon(sdata); | 
|  | 1222 | if (ret) | 
|  | 1223 | return -EINVAL; | 
|  | 1224 |  | 
|  | 1225 | changed |= BSS_CHANGED_BEACON; | 
|  | 1226 |  | 
|  | 1227 | mcsa_dbg(sdata, "complete switching to center freq %d MHz", | 
|  | 1228 | sdata->vif.bss_conf.chandef.chan->center_freq); | 
|  | 1229 | return changed; | 
|  | 1230 | } | 
|  | 1231 |  | 
|  | 1232 | int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | 1233 | struct cfg80211_csa_settings *csa_settings) | 
|  | 1234 | { | 
|  | 1235 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1236 | struct mesh_csa_settings *tmp_csa_settings; | 
|  | 1237 | int ret = 0; | 
|  | 1238 |  | 
|  | 1239 | lockdep_assert_held(&sdata->wdev.mtx); | 
|  | 1240 |  | 
|  | 1241 | tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings), | 
|  | 1242 | GFP_ATOMIC); | 
|  | 1243 | if (!tmp_csa_settings) | 
|  | 1244 | return -ENOMEM; | 
|  | 1245 |  | 
|  | 1246 | memcpy(&tmp_csa_settings->settings, csa_settings, | 
|  | 1247 | sizeof(struct cfg80211_csa_settings)); | 
|  | 1248 |  | 
|  | 1249 | rcu_assign_pointer(ifmsh->csa, tmp_csa_settings); | 
|  | 1250 |  | 
|  | 1251 | ret = ieee80211_mesh_rebuild_beacon(sdata); | 
|  | 1252 | if (ret) { | 
|  | 1253 | tmp_csa_settings = rcu_dereference(ifmsh->csa); | 
|  | 1254 | RCU_INIT_POINTER(ifmsh->csa, NULL); | 
|  | 1255 | kfree_rcu(tmp_csa_settings, rcu_head); | 
|  | 1256 | return ret; | 
|  | 1257 | } | 
|  | 1258 |  | 
|  | 1259 | return BSS_CHANGED_BEACON; | 
|  | 1260 | } | 
|  | 1261 |  | 
|  | 1262 | static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata, | 
|  | 1263 | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | 1264 | struct ieee802_11_elems *elems) | 
|  | 1265 | { | 
|  | 1266 | struct ieee80211_mgmt *mgmt_fwd; | 
|  | 1267 | struct sk_buff *skb; | 
|  | 1268 | struct ieee80211_local *local = sdata->local; | 
|  | 1269 |  | 
|  | 1270 | skb = dev_alloc_skb(local->tx_headroom + len); | 
|  | 1271 | if (!skb) | 
|  | 1272 | return -ENOMEM; | 
|  | 1273 | skb_reserve(skb, local->tx_headroom); | 
|  | 1274 | mgmt_fwd = skb_put(skb, len); | 
|  | 1275 |  | 
|  | 1276 | elems->mesh_chansw_params_ie->mesh_ttl--; | 
|  | 1277 | elems->mesh_chansw_params_ie->mesh_flags &= | 
|  | 1278 | ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | 
|  | 1279 |  | 
|  | 1280 | memcpy(mgmt_fwd, mgmt, len); | 
|  | 1281 | eth_broadcast_addr(mgmt_fwd->da); | 
|  | 1282 | memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN); | 
|  | 1283 | memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN); | 
|  | 1284 |  | 
|  | 1285 | ieee80211_tx_skb(sdata, skb); | 
|  | 1286 | return 0; | 
|  | 1287 | } | 
|  | 1288 |  | 
|  | 1289 | static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, | 
|  | 1290 | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | 1291 | { | 
|  | 1292 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1293 | struct ieee802_11_elems elems; | 
|  | 1294 | u16 pre_value; | 
|  | 1295 | bool fwd_csa = true; | 
|  | 1296 | size_t baselen; | 
|  | 1297 | u8 *pos; | 
|  | 1298 |  | 
|  | 1299 | if (mgmt->u.action.u.measurement.action_code != | 
|  | 1300 | WLAN_ACTION_SPCT_CHL_SWITCH) | 
|  | 1301 | return; | 
|  | 1302 |  | 
|  | 1303 | pos = mgmt->u.action.u.chan_switch.variable; | 
|  | 1304 | baselen = offsetof(struct ieee80211_mgmt, | 
|  | 1305 | u.action.u.chan_switch.variable); | 
|  | 1306 | ieee802_11_parse_elems(pos, len - baselen, true, &elems); | 
|  | 1307 |  | 
|  | 1308 | ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl; | 
|  | 1309 | if (!--ifmsh->chsw_ttl) | 
|  | 1310 | fwd_csa = false; | 
|  | 1311 |  | 
|  | 1312 | pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value); | 
|  | 1313 | if (ifmsh->pre_value >= pre_value) | 
|  | 1314 | return; | 
|  | 1315 |  | 
|  | 1316 | ifmsh->pre_value = pre_value; | 
|  | 1317 |  | 
|  | 1318 | if (!sdata->vif.csa_active && | 
|  | 1319 | !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { | 
|  | 1320 | mcsa_dbg(sdata, "Failed to process CSA action frame"); | 
|  | 1321 | return; | 
|  | 1322 | } | 
|  | 1323 |  | 
|  | 1324 | /* forward or re-broadcast the CSA frame */ | 
|  | 1325 | if (fwd_csa) { | 
|  | 1326 | if (mesh_fwd_csa_frame(sdata, mgmt, len, &elems) < 0) | 
|  | 1327 | mcsa_dbg(sdata, "Failed to forward the CSA frame"); | 
|  | 1328 | } | 
|  | 1329 | } | 
|  | 1330 |  | 
|  | 1331 | static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, | 
|  | 1332 | struct ieee80211_mgmt *mgmt, | 
|  | 1333 | size_t len, | 
|  | 1334 | struct ieee80211_rx_status *rx_status) | 
|  | 1335 | { | 
|  | 1336 | switch (mgmt->u.action.category) { | 
|  | 1337 | case WLAN_CATEGORY_SELF_PROTECTED: | 
|  | 1338 | switch (mgmt->u.action.u.self_prot.action_code) { | 
|  | 1339 | case WLAN_SP_MESH_PEERING_OPEN: | 
|  | 1340 | case WLAN_SP_MESH_PEERING_CLOSE: | 
|  | 1341 | case WLAN_SP_MESH_PEERING_CONFIRM: | 
|  | 1342 | mesh_rx_plink_frame(sdata, mgmt, len, rx_status); | 
|  | 1343 | break; | 
|  | 1344 | } | 
|  | 1345 | break; | 
|  | 1346 | case WLAN_CATEGORY_MESH_ACTION: | 
|  | 1347 | if (mesh_action_is_path_sel(mgmt)) | 
|  | 1348 | mesh_rx_path_sel_frame(sdata, mgmt, len); | 
|  | 1349 | break; | 
|  | 1350 | case WLAN_CATEGORY_SPECTRUM_MGMT: | 
|  | 1351 | mesh_rx_csa_frame(sdata, mgmt, len); | 
|  | 1352 | break; | 
|  | 1353 | } | 
|  | 1354 | } | 
|  | 1355 |  | 
|  | 1356 | void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | 1357 | struct sk_buff *skb) | 
|  | 1358 | { | 
|  | 1359 | struct ieee80211_rx_status *rx_status; | 
|  | 1360 | struct ieee80211_mgmt *mgmt; | 
|  | 1361 | u16 stype; | 
|  | 1362 |  | 
|  | 1363 | sdata_lock(sdata); | 
|  | 1364 |  | 
|  | 1365 | /* mesh already went down */ | 
|  | 1366 | if (!sdata->u.mesh.mesh_id_len) | 
|  | 1367 | goto out; | 
|  | 1368 |  | 
|  | 1369 | rx_status = IEEE80211_SKB_RXCB(skb); | 
|  | 1370 | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | 1371 | stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; | 
|  | 1372 |  | 
|  | 1373 | switch (stype) { | 
|  | 1374 | case IEEE80211_STYPE_PROBE_RESP: | 
|  | 1375 | case IEEE80211_STYPE_BEACON: | 
|  | 1376 | ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, | 
|  | 1377 | rx_status); | 
|  | 1378 | break; | 
|  | 1379 | case IEEE80211_STYPE_PROBE_REQ: | 
|  | 1380 | ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); | 
|  | 1381 | break; | 
|  | 1382 | case IEEE80211_STYPE_ACTION: | 
|  | 1383 | ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); | 
|  | 1384 | break; | 
|  | 1385 | } | 
|  | 1386 | out: | 
|  | 1387 | sdata_unlock(sdata); | 
|  | 1388 | } | 
|  | 1389 |  | 
|  | 1390 | static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata) | 
|  | 1391 | { | 
|  | 1392 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1393 | u32 bit, changed = 0; | 
|  | 1394 |  | 
|  | 1395 | for_each_set_bit(bit, &ifmsh->mbss_changed, | 
|  | 1396 | sizeof(changed) * BITS_PER_BYTE) { | 
|  | 1397 | clear_bit(bit, &ifmsh->mbss_changed); | 
|  | 1398 | changed |= BIT(bit); | 
|  | 1399 | } | 
|  | 1400 |  | 
|  | 1401 | if (sdata->vif.bss_conf.enable_beacon && | 
|  | 1402 | (changed & (BSS_CHANGED_BEACON | | 
|  | 1403 | BSS_CHANGED_HT | | 
|  | 1404 | BSS_CHANGED_BASIC_RATES | | 
|  | 1405 | BSS_CHANGED_BEACON_INT))) | 
|  | 1406 | if (ieee80211_mesh_rebuild_beacon(sdata)) | 
|  | 1407 | return; | 
|  | 1408 |  | 
|  | 1409 | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | 1410 | } | 
|  | 1411 |  | 
|  | 1412 | void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) | 
|  | 1413 | { | 
|  | 1414 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1415 |  | 
|  | 1416 | sdata_lock(sdata); | 
|  | 1417 |  | 
|  | 1418 | /* mesh already went down */ | 
|  | 1419 | if (!sdata->u.mesh.mesh_id_len) | 
|  | 1420 | goto out; | 
|  | 1421 |  | 
|  | 1422 | if (ifmsh->preq_queue_len && | 
|  | 1423 | time_after(jiffies, | 
|  | 1424 | ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) | 
|  | 1425 | mesh_path_start_discovery(sdata); | 
|  | 1426 |  | 
|  | 1427 | if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) | 
|  | 1428 | ieee80211_mesh_housekeeping(sdata); | 
|  | 1429 |  | 
|  | 1430 | if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) | 
|  | 1431 | ieee80211_mesh_rootpath(sdata); | 
|  | 1432 |  | 
|  | 1433 | if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) | 
|  | 1434 | mesh_sync_adjust_tsf(sdata); | 
|  | 1435 |  | 
|  | 1436 | if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags)) | 
|  | 1437 | mesh_bss_info_changed(sdata); | 
|  | 1438 | out: | 
|  | 1439 | sdata_unlock(sdata); | 
|  | 1440 | } | 
|  | 1441 |  | 
|  | 1442 |  | 
|  | 1443 | void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | 1444 | { | 
|  | 1445 | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | 1446 | static u8 zero_addr[ETH_ALEN] = {}; | 
|  | 1447 |  | 
|  | 1448 | timer_setup(&ifmsh->housekeeping_timer, | 
|  | 1449 | ieee80211_mesh_housekeeping_timer, 0); | 
|  | 1450 |  | 
|  | 1451 | ifmsh->accepting_plinks = true; | 
|  | 1452 | atomic_set(&ifmsh->mpaths, 0); | 
|  | 1453 | mesh_rmc_init(sdata); | 
|  | 1454 | ifmsh->last_preq = jiffies; | 
|  | 1455 | ifmsh->next_perr = jiffies; | 
|  | 1456 | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
|  | 1457 | /* Allocate all mesh structures when creating the first mesh interface. */ | 
|  | 1458 | if (!mesh_allocated) | 
|  | 1459 | ieee80211s_init(); | 
|  | 1460 |  | 
|  | 1461 | mesh_pathtbl_init(sdata); | 
|  | 1462 |  | 
|  | 1463 | timer_setup(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, 0); | 
|  | 1464 | timer_setup(&ifmsh->mesh_path_root_timer, | 
|  | 1465 | ieee80211_mesh_path_root_timer, 0); | 
|  | 1466 | INIT_LIST_HEAD(&ifmsh->preq_queue.list); | 
|  | 1467 | skb_queue_head_init(&ifmsh->ps.bc_buf); | 
|  | 1468 | spin_lock_init(&ifmsh->mesh_preq_queue_lock); | 
|  | 1469 | spin_lock_init(&ifmsh->sync_offset_lock); | 
|  | 1470 | RCU_INIT_POINTER(ifmsh->beacon, NULL); | 
|  | 1471 |  | 
|  | 1472 | sdata->vif.bss_conf.bssid = zero_addr; | 
|  | 1473 | } | 
|  | 1474 |  | 
|  | 1475 | void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | 1476 | { | 
|  | 1477 | mesh_rmc_free(sdata); | 
|  | 1478 | mesh_pathtbl_unregister(sdata); | 
|  | 1479 | } |