| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* |
| 2 | * rfd77402.c - Support for RF Digital RFD77402 Time-of-Flight (distance) sensor |
| 3 | * |
| 4 | * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> |
| 5 | * |
| 6 | * This file is subject to the terms and conditions of version 2 of |
| 7 | * the GNU General Public License. See the file COPYING in the main |
| 8 | * directory of this archive for more details. |
| 9 | * |
| 10 | * 7-bit I2C slave address 0x4c |
| 11 | * |
| 12 | * TODO: interrupt |
| 13 | * https://media.digikey.com/pdf/Data%20Sheets/RF%20Digital%20PDFs/RFD77402.pdf |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/i2c.h> |
| 18 | #include <linux/delay.h> |
| 19 | |
| 20 | #include <linux/iio/iio.h> |
| 21 | |
| 22 | #define RFD77402_DRV_NAME "rfd77402" |
| 23 | |
| 24 | #define RFD77402_ICSR 0x00 /* Interrupt Control Status Register */ |
| 25 | #define RFD77402_ICSR_INT_MODE BIT(2) |
| 26 | #define RFD77402_ICSR_INT_POL BIT(3) |
| 27 | #define RFD77402_ICSR_RESULT BIT(4) |
| 28 | #define RFD77402_ICSR_M2H_MSG BIT(5) |
| 29 | #define RFD77402_ICSR_H2M_MSG BIT(6) |
| 30 | #define RFD77402_ICSR_RESET BIT(7) |
| 31 | |
| 32 | #define RFD77402_CMD_R 0x04 |
| 33 | #define RFD77402_CMD_SINGLE 0x01 |
| 34 | #define RFD77402_CMD_STANDBY 0x10 |
| 35 | #define RFD77402_CMD_MCPU_OFF 0x11 |
| 36 | #define RFD77402_CMD_MCPU_ON 0x12 |
| 37 | #define RFD77402_CMD_RESET BIT(6) |
| 38 | #define RFD77402_CMD_VALID BIT(7) |
| 39 | |
| 40 | #define RFD77402_STATUS_R 0x06 |
| 41 | #define RFD77402_STATUS_PM_MASK GENMASK(4, 0) |
| 42 | #define RFD77402_STATUS_STANDBY 0x00 |
| 43 | #define RFD77402_STATUS_MCPU_OFF 0x10 |
| 44 | #define RFD77402_STATUS_MCPU_ON 0x18 |
| 45 | |
| 46 | #define RFD77402_RESULT_R 0x08 |
| 47 | #define RFD77402_RESULT_DIST_MASK GENMASK(12, 2) |
| 48 | #define RFD77402_RESULT_ERR_MASK GENMASK(14, 13) |
| 49 | #define RFD77402_RESULT_VALID BIT(15) |
| 50 | |
| 51 | #define RFD77402_PMU_CFG 0x14 |
| 52 | #define RFD77402_PMU_MCPU_INIT BIT(9) |
| 53 | |
| 54 | #define RFD77402_I2C_INIT_CFG 0x1c |
| 55 | #define RFD77402_I2C_ADDR_INCR BIT(0) |
| 56 | #define RFD77402_I2C_DATA_INCR BIT(2) |
| 57 | #define RFD77402_I2C_HOST_DEBUG BIT(5) |
| 58 | #define RFD77402_I2C_MCPU_DEBUG BIT(6) |
| 59 | |
| 60 | #define RFD77402_CMD_CFGR_A 0x0c |
| 61 | #define RFD77402_CMD_CFGR_B 0x0e |
| 62 | #define RFD77402_HFCFG_0 0x20 |
| 63 | #define RFD77402_HFCFG_1 0x22 |
| 64 | #define RFD77402_HFCFG_2 0x24 |
| 65 | #define RFD77402_HFCFG_3 0x26 |
| 66 | |
| 67 | #define RFD77402_MOD_CHIP_ID 0x28 |
| 68 | |
| 69 | /* magic configuration values from datasheet */ |
| 70 | static const struct { |
| 71 | u8 reg; |
| 72 | u16 val; |
| 73 | } rf77402_tof_config[] = { |
| 74 | {RFD77402_CMD_CFGR_A, 0xe100}, |
| 75 | {RFD77402_CMD_CFGR_B, 0x10ff}, |
| 76 | {RFD77402_HFCFG_0, 0x07d0}, |
| 77 | {RFD77402_HFCFG_1, 0x5008}, |
| 78 | {RFD77402_HFCFG_2, 0xa041}, |
| 79 | {RFD77402_HFCFG_3, 0x45d4}, |
| 80 | }; |
| 81 | |
| 82 | struct rfd77402_data { |
| 83 | struct i2c_client *client; |
| 84 | /* Serialize reads from the sensor */ |
| 85 | struct mutex lock; |
| 86 | }; |
| 87 | |
| 88 | static const struct iio_chan_spec rfd77402_channels[] = { |
| 89 | { |
| 90 | .type = IIO_DISTANCE, |
| 91 | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| 92 | BIT(IIO_CHAN_INFO_SCALE), |
| 93 | }, |
| 94 | }; |
| 95 | |
| 96 | static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check) |
| 97 | { |
| 98 | int ret; |
| 99 | |
| 100 | ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R, |
| 101 | state | RFD77402_CMD_VALID); |
| 102 | if (ret < 0) |
| 103 | return ret; |
| 104 | |
| 105 | usleep_range(10000, 20000); |
| 106 | |
| 107 | ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R); |
| 108 | if (ret < 0) |
| 109 | return ret; |
| 110 | if ((ret & RFD77402_STATUS_PM_MASK) != check) |
| 111 | return -ENODEV; |
| 112 | |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | static int rfd77402_measure(struct rfd77402_data *data) |
| 117 | { |
| 118 | int ret; |
| 119 | int tries = 10; |
| 120 | |
| 121 | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON, |
| 122 | RFD77402_STATUS_MCPU_ON); |
| 123 | if (ret < 0) |
| 124 | return ret; |
| 125 | |
| 126 | ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R, |
| 127 | RFD77402_CMD_SINGLE | |
| 128 | RFD77402_CMD_VALID); |
| 129 | if (ret < 0) |
| 130 | goto err; |
| 131 | |
| 132 | while (tries-- > 0) { |
| 133 | ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR); |
| 134 | if (ret < 0) |
| 135 | goto err; |
| 136 | if (ret & RFD77402_ICSR_RESULT) |
| 137 | break; |
| 138 | msleep(20); |
| 139 | } |
| 140 | |
| 141 | if (tries < 0) { |
| 142 | ret = -ETIMEDOUT; |
| 143 | goto err; |
| 144 | } |
| 145 | |
| 146 | ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R); |
| 147 | if (ret < 0) |
| 148 | goto err; |
| 149 | |
| 150 | if ((ret & RFD77402_RESULT_ERR_MASK) || |
| 151 | !(ret & RFD77402_RESULT_VALID)) { |
| 152 | ret = -EIO; |
| 153 | goto err; |
| 154 | } |
| 155 | |
| 156 | return (ret & RFD77402_RESULT_DIST_MASK) >> 2; |
| 157 | |
| 158 | err: |
| 159 | rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF, |
| 160 | RFD77402_STATUS_MCPU_OFF); |
| 161 | return ret; |
| 162 | } |
| 163 | |
| 164 | static int rfd77402_read_raw(struct iio_dev *indio_dev, |
| 165 | struct iio_chan_spec const *chan, |
| 166 | int *val, int *val2, long mask) |
| 167 | { |
| 168 | struct rfd77402_data *data = iio_priv(indio_dev); |
| 169 | int ret; |
| 170 | |
| 171 | switch (mask) { |
| 172 | case IIO_CHAN_INFO_RAW: |
| 173 | mutex_lock(&data->lock); |
| 174 | ret = rfd77402_measure(data); |
| 175 | mutex_unlock(&data->lock); |
| 176 | if (ret < 0) |
| 177 | return ret; |
| 178 | *val = ret; |
| 179 | return IIO_VAL_INT; |
| 180 | case IIO_CHAN_INFO_SCALE: |
| 181 | /* 1 LSB is 1 mm */ |
| 182 | *val = 0; |
| 183 | *val2 = 1000; |
| 184 | return IIO_VAL_INT_PLUS_MICRO; |
| 185 | default: |
| 186 | return -EINVAL; |
| 187 | } |
| 188 | } |
| 189 | |
| 190 | static const struct iio_info rfd77402_info = { |
| 191 | .read_raw = rfd77402_read_raw, |
| 192 | }; |
| 193 | |
| 194 | static int rfd77402_init(struct rfd77402_data *data) |
| 195 | { |
| 196 | int ret, i; |
| 197 | |
| 198 | ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY, |
| 199 | RFD77402_STATUS_STANDBY); |
| 200 | if (ret < 0) |
| 201 | return ret; |
| 202 | |
| 203 | /* configure INT pad as push-pull, active low */ |
| 204 | ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR, |
| 205 | RFD77402_ICSR_INT_MODE); |
| 206 | if (ret < 0) |
| 207 | return ret; |
| 208 | |
| 209 | /* I2C configuration */ |
| 210 | ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG, |
| 211 | RFD77402_I2C_ADDR_INCR | |
| 212 | RFD77402_I2C_DATA_INCR | |
| 213 | RFD77402_I2C_HOST_DEBUG | |
| 214 | RFD77402_I2C_MCPU_DEBUG); |
| 215 | if (ret < 0) |
| 216 | return ret; |
| 217 | |
| 218 | /* set initialization */ |
| 219 | ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500); |
| 220 | if (ret < 0) |
| 221 | return ret; |
| 222 | |
| 223 | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF, |
| 224 | RFD77402_STATUS_MCPU_OFF); |
| 225 | if (ret < 0) |
| 226 | return ret; |
| 227 | |
| 228 | /* set initialization */ |
| 229 | ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600); |
| 230 | if (ret < 0) |
| 231 | return ret; |
| 232 | |
| 233 | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON, |
| 234 | RFD77402_STATUS_MCPU_ON); |
| 235 | if (ret < 0) |
| 236 | return ret; |
| 237 | |
| 238 | for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) { |
| 239 | ret = i2c_smbus_write_word_data(data->client, |
| 240 | rf77402_tof_config[i].reg, |
| 241 | rf77402_tof_config[i].val); |
| 242 | if (ret < 0) |
| 243 | return ret; |
| 244 | } |
| 245 | |
| 246 | ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY, |
| 247 | RFD77402_STATUS_STANDBY); |
| 248 | |
| 249 | return ret; |
| 250 | } |
| 251 | |
| 252 | static int rfd77402_powerdown(struct rfd77402_data *data) |
| 253 | { |
| 254 | return rfd77402_set_state(data, RFD77402_CMD_STANDBY, |
| 255 | RFD77402_STATUS_STANDBY); |
| 256 | } |
| 257 | |
| 258 | static int rfd77402_probe(struct i2c_client *client, |
| 259 | const struct i2c_device_id *id) |
| 260 | { |
| 261 | struct rfd77402_data *data; |
| 262 | struct iio_dev *indio_dev; |
| 263 | int ret; |
| 264 | |
| 265 | ret = i2c_smbus_read_word_data(client, RFD77402_MOD_CHIP_ID); |
| 266 | if (ret < 0) |
| 267 | return ret; |
| 268 | if (ret != 0xad01 && ret != 0xad02) /* known chip ids */ |
| 269 | return -ENODEV; |
| 270 | |
| 271 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| 272 | if (!indio_dev) |
| 273 | return -ENOMEM; |
| 274 | |
| 275 | data = iio_priv(indio_dev); |
| 276 | i2c_set_clientdata(client, indio_dev); |
| 277 | data->client = client; |
| 278 | mutex_init(&data->lock); |
| 279 | |
| 280 | indio_dev->dev.parent = &client->dev; |
| 281 | indio_dev->info = &rfd77402_info; |
| 282 | indio_dev->channels = rfd77402_channels; |
| 283 | indio_dev->num_channels = ARRAY_SIZE(rfd77402_channels); |
| 284 | indio_dev->name = RFD77402_DRV_NAME; |
| 285 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 286 | |
| 287 | ret = rfd77402_init(data); |
| 288 | if (ret < 0) |
| 289 | return ret; |
| 290 | |
| 291 | ret = iio_device_register(indio_dev); |
| 292 | if (ret) |
| 293 | goto err_powerdown; |
| 294 | |
| 295 | return 0; |
| 296 | |
| 297 | err_powerdown: |
| 298 | rfd77402_powerdown(data); |
| 299 | return ret; |
| 300 | } |
| 301 | |
| 302 | static int rfd77402_remove(struct i2c_client *client) |
| 303 | { |
| 304 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 305 | |
| 306 | iio_device_unregister(indio_dev); |
| 307 | rfd77402_powerdown(iio_priv(indio_dev)); |
| 308 | |
| 309 | return 0; |
| 310 | } |
| 311 | |
| 312 | #ifdef CONFIG_PM_SLEEP |
| 313 | static int rfd77402_suspend(struct device *dev) |
| 314 | { |
| 315 | struct rfd77402_data *data = iio_priv(i2c_get_clientdata( |
| 316 | to_i2c_client(dev))); |
| 317 | |
| 318 | return rfd77402_powerdown(data); |
| 319 | } |
| 320 | |
| 321 | static int rfd77402_resume(struct device *dev) |
| 322 | { |
| 323 | struct rfd77402_data *data = iio_priv(i2c_get_clientdata( |
| 324 | to_i2c_client(dev))); |
| 325 | |
| 326 | return rfd77402_init(data); |
| 327 | } |
| 328 | #endif |
| 329 | |
| 330 | static SIMPLE_DEV_PM_OPS(rfd77402_pm_ops, rfd77402_suspend, rfd77402_resume); |
| 331 | |
| 332 | static const struct i2c_device_id rfd77402_id[] = { |
| 333 | { "rfd77402", 0}, |
| 334 | { } |
| 335 | }; |
| 336 | MODULE_DEVICE_TABLE(i2c, rfd77402_id); |
| 337 | |
| 338 | static struct i2c_driver rfd77402_driver = { |
| 339 | .driver = { |
| 340 | .name = RFD77402_DRV_NAME, |
| 341 | .pm = &rfd77402_pm_ops, |
| 342 | }, |
| 343 | .probe = rfd77402_probe, |
| 344 | .remove = rfd77402_remove, |
| 345 | .id_table = rfd77402_id, |
| 346 | }; |
| 347 | |
| 348 | module_i2c_driver(rfd77402_driver); |
| 349 | |
| 350 | MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); |
| 351 | MODULE_DESCRIPTION("RFD77402 Time-of-Flight sensor driver"); |
| 352 | MODULE_LICENSE("GPL"); |