| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | *   This program is free software; you can redistribute it and/or modify | 
|  | 3 | *   it under the terms of the GNU General Public License as published by | 
|  | 4 | *   the Free Software Foundation; either version 2 of the License, or | 
|  | 5 | *   (at your option) any later version. | 
|  | 6 | * | 
|  | 7 | *   This program is distributed in the hope that it will be useful, | 
|  | 8 | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 9 | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 10 | *   GNU General Public License for more details. | 
|  | 11 | * | 
|  | 12 | *   You should have received a copy of the GNU General Public License | 
|  | 13 | *   along with this program; if not, write to the Free Software | 
|  | 14 | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | 15 | */ | 
|  | 16 |  | 
|  | 17 | #include <linux/init.h> | 
|  | 18 | #include <linux/slab.h> | 
|  | 19 | #include <linux/usb.h> | 
|  | 20 | #include <linux/usb/audio.h> | 
|  | 21 | #include <linux/usb/midi.h> | 
|  | 22 |  | 
|  | 23 | #include <sound/control.h> | 
|  | 24 | #include <sound/core.h> | 
|  | 25 | #include <sound/info.h> | 
|  | 26 | #include <sound/pcm.h> | 
|  | 27 |  | 
|  | 28 | #include "usbaudio.h" | 
|  | 29 | #include "card.h" | 
|  | 30 | #include "mixer.h" | 
|  | 31 | #include "mixer_quirks.h" | 
|  | 32 | #include "midi.h" | 
|  | 33 | #include "quirks.h" | 
|  | 34 | #include "helper.h" | 
|  | 35 | #include "endpoint.h" | 
|  | 36 | #include "pcm.h" | 
|  | 37 | #include "clock.h" | 
|  | 38 | #include "stream.h" | 
|  | 39 |  | 
|  | 40 | /* | 
|  | 41 | * handle the quirks for the contained interfaces | 
|  | 42 | */ | 
|  | 43 | static int create_composite_quirk(struct snd_usb_audio *chip, | 
|  | 44 | struct usb_interface *iface, | 
|  | 45 | struct usb_driver *driver, | 
|  | 46 | const struct snd_usb_audio_quirk *quirk_comp) | 
|  | 47 | { | 
|  | 48 | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | 
|  | 49 | const struct snd_usb_audio_quirk *quirk; | 
|  | 50 | int err; | 
|  | 51 |  | 
|  | 52 | for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { | 
|  | 53 | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); | 
|  | 54 | if (!iface) | 
|  | 55 | continue; | 
|  | 56 | if (quirk->ifnum != probed_ifnum && | 
|  | 57 | usb_interface_claimed(iface)) | 
|  | 58 | continue; | 
|  | 59 | err = snd_usb_create_quirk(chip, iface, driver, quirk); | 
|  | 60 | if (err < 0) | 
|  | 61 | return err; | 
|  | 62 | } | 
|  | 63 |  | 
|  | 64 | for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { | 
|  | 65 | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); | 
|  | 66 | if (!iface) | 
|  | 67 | continue; | 
|  | 68 | if (quirk->ifnum != probed_ifnum && | 
|  | 69 | !usb_interface_claimed(iface)) | 
|  | 70 | usb_driver_claim_interface(driver, iface, (void *)-1L); | 
|  | 71 | } | 
|  | 72 |  | 
|  | 73 | return 0; | 
|  | 74 | } | 
|  | 75 |  | 
|  | 76 | static int ignore_interface_quirk(struct snd_usb_audio *chip, | 
|  | 77 | struct usb_interface *iface, | 
|  | 78 | struct usb_driver *driver, | 
|  | 79 | const struct snd_usb_audio_quirk *quirk) | 
|  | 80 | { | 
|  | 81 | return 0; | 
|  | 82 | } | 
|  | 83 |  | 
|  | 84 |  | 
|  | 85 | /* | 
|  | 86 | * Allow alignment on audio sub-slot (channel samples) rather than | 
|  | 87 | * on audio slots (audio frames) | 
|  | 88 | */ | 
|  | 89 | static int create_align_transfer_quirk(struct snd_usb_audio *chip, | 
|  | 90 | struct usb_interface *iface, | 
|  | 91 | struct usb_driver *driver, | 
|  | 92 | const struct snd_usb_audio_quirk *quirk) | 
|  | 93 | { | 
|  | 94 | chip->txfr_quirk = 1; | 
|  | 95 | return 1;	/* Continue with creating streams and mixer */ | 
|  | 96 | } | 
|  | 97 |  | 
|  | 98 | static int create_any_midi_quirk(struct snd_usb_audio *chip, | 
|  | 99 | struct usb_interface *intf, | 
|  | 100 | struct usb_driver *driver, | 
|  | 101 | const struct snd_usb_audio_quirk *quirk) | 
|  | 102 | { | 
|  | 103 | return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); | 
|  | 104 | } | 
|  | 105 |  | 
|  | 106 | /* | 
|  | 107 | * create a stream for an interface with proper descriptors | 
|  | 108 | */ | 
|  | 109 | static int create_standard_audio_quirk(struct snd_usb_audio *chip, | 
|  | 110 | struct usb_interface *iface, | 
|  | 111 | struct usb_driver *driver, | 
|  | 112 | const struct snd_usb_audio_quirk *quirk) | 
|  | 113 | { | 
|  | 114 | struct usb_host_interface *alts; | 
|  | 115 | struct usb_interface_descriptor *altsd; | 
|  | 116 | int err; | 
|  | 117 |  | 
|  | 118 | if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */ | 
|  | 119 | chip->tx_length_quirk = 1; | 
|  | 120 |  | 
|  | 121 | alts = &iface->altsetting[0]; | 
|  | 122 | altsd = get_iface_desc(alts); | 
|  | 123 | err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber); | 
|  | 124 | if (err < 0) { | 
|  | 125 | usb_audio_err(chip, "cannot setup if %d: error %d\n", | 
|  | 126 | altsd->bInterfaceNumber, err); | 
|  | 127 | return err; | 
|  | 128 | } | 
|  | 129 | /* reset the current interface */ | 
|  | 130 | usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); | 
|  | 131 | return 0; | 
|  | 132 | } | 
|  | 133 |  | 
|  | 134 | /* | 
|  | 135 | * create a stream for an endpoint/altsetting without proper descriptors | 
|  | 136 | */ | 
|  | 137 | static int create_fixed_stream_quirk(struct snd_usb_audio *chip, | 
|  | 138 | struct usb_interface *iface, | 
|  | 139 | struct usb_driver *driver, | 
|  | 140 | const struct snd_usb_audio_quirk *quirk) | 
|  | 141 | { | 
|  | 142 | struct audioformat *fp; | 
|  | 143 | struct usb_host_interface *alts; | 
|  | 144 | struct usb_interface_descriptor *altsd; | 
|  | 145 | int stream, err; | 
|  | 146 | unsigned *rate_table = NULL; | 
|  | 147 |  | 
|  | 148 | fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); | 
|  | 149 | if (!fp) | 
|  | 150 | return -ENOMEM; | 
|  | 151 |  | 
|  | 152 | INIT_LIST_HEAD(&fp->list); | 
|  | 153 | if (fp->nr_rates > MAX_NR_RATES) { | 
|  | 154 | kfree(fp); | 
|  | 155 | return -EINVAL; | 
|  | 156 | } | 
|  | 157 | if (fp->nr_rates > 0) { | 
|  | 158 | rate_table = kmemdup(fp->rate_table, | 
|  | 159 | sizeof(int) * fp->nr_rates, GFP_KERNEL); | 
|  | 160 | if (!rate_table) { | 
|  | 161 | kfree(fp); | 
|  | 162 | return -ENOMEM; | 
|  | 163 | } | 
|  | 164 | fp->rate_table = rate_table; | 
|  | 165 | } | 
|  | 166 |  | 
|  | 167 | stream = (fp->endpoint & USB_DIR_IN) | 
|  | 168 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | 
|  | 169 | err = snd_usb_add_audio_stream(chip, stream, fp); | 
|  | 170 | if (err < 0) | 
|  | 171 | goto error; | 
|  | 172 | if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || | 
|  | 173 | fp->altset_idx >= iface->num_altsetting) { | 
|  | 174 | err = -EINVAL; | 
|  | 175 | goto error; | 
|  | 176 | } | 
|  | 177 | alts = &iface->altsetting[fp->altset_idx]; | 
|  | 178 | altsd = get_iface_desc(alts); | 
|  | 179 | if (altsd->bNumEndpoints < 1) { | 
|  | 180 | err = -EINVAL; | 
|  | 181 | goto error; | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | fp->protocol = altsd->bInterfaceProtocol; | 
|  | 185 |  | 
|  | 186 | if (fp->datainterval == 0) | 
|  | 187 | fp->datainterval = snd_usb_parse_datainterval(chip, alts); | 
|  | 188 | if (fp->maxpacksize == 0) | 
|  | 189 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | 
|  | 190 | usb_set_interface(chip->dev, fp->iface, 0); | 
|  | 191 | snd_usb_init_pitch(chip, fp->iface, alts, fp); | 
|  | 192 | snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); | 
|  | 193 | return 0; | 
|  | 194 |  | 
|  | 195 | error: | 
|  | 196 | list_del(&fp->list); /* unlink for avoiding double-free */ | 
|  | 197 | kfree(fp); | 
|  | 198 | kfree(rate_table); | 
|  | 199 | return err; | 
|  | 200 | } | 
|  | 201 |  | 
|  | 202 | static int create_auto_pcm_quirk(struct snd_usb_audio *chip, | 
|  | 203 | struct usb_interface *iface, | 
|  | 204 | struct usb_driver *driver) | 
|  | 205 | { | 
|  | 206 | struct usb_host_interface *alts; | 
|  | 207 | struct usb_interface_descriptor *altsd; | 
|  | 208 | struct usb_endpoint_descriptor *epd; | 
|  | 209 | struct uac1_as_header_descriptor *ashd; | 
|  | 210 | struct uac_format_type_i_discrete_descriptor *fmtd; | 
|  | 211 |  | 
|  | 212 | /* | 
|  | 213 | * Most Roland/Yamaha audio streaming interfaces have more or less | 
|  | 214 | * standard descriptors, but older devices might lack descriptors, and | 
|  | 215 | * future ones might change, so ensure that we fail silently if the | 
|  | 216 | * interface doesn't look exactly right. | 
|  | 217 | */ | 
|  | 218 |  | 
|  | 219 | /* must have a non-zero altsetting for streaming */ | 
|  | 220 | if (iface->num_altsetting < 2) | 
|  | 221 | return -ENODEV; | 
|  | 222 | alts = &iface->altsetting[1]; | 
|  | 223 | altsd = get_iface_desc(alts); | 
|  | 224 |  | 
|  | 225 | /* must have an isochronous endpoint for streaming */ | 
|  | 226 | if (altsd->bNumEndpoints < 1) | 
|  | 227 | return -ENODEV; | 
|  | 228 | epd = get_endpoint(alts, 0); | 
|  | 229 | if (!usb_endpoint_xfer_isoc(epd)) | 
|  | 230 | return -ENODEV; | 
|  | 231 |  | 
|  | 232 | /* must have format descriptors */ | 
|  | 233 | ashd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, | 
|  | 234 | UAC_AS_GENERAL); | 
|  | 235 | fmtd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, | 
|  | 236 | UAC_FORMAT_TYPE); | 
|  | 237 | if (!ashd || ashd->bLength < 7 || | 
|  | 238 | !fmtd || fmtd->bLength < 8) | 
|  | 239 | return -ENODEV; | 
|  | 240 |  | 
|  | 241 | return create_standard_audio_quirk(chip, iface, driver, NULL); | 
|  | 242 | } | 
|  | 243 |  | 
|  | 244 | static int create_yamaha_midi_quirk(struct snd_usb_audio *chip, | 
|  | 245 | struct usb_interface *iface, | 
|  | 246 | struct usb_driver *driver, | 
|  | 247 | struct usb_host_interface *alts) | 
|  | 248 | { | 
|  | 249 | static const struct snd_usb_audio_quirk yamaha_midi_quirk = { | 
|  | 250 | .type = QUIRK_MIDI_YAMAHA | 
|  | 251 | }; | 
|  | 252 | struct usb_midi_in_jack_descriptor *injd; | 
|  | 253 | struct usb_midi_out_jack_descriptor *outjd; | 
|  | 254 |  | 
|  | 255 | /* must have some valid jack descriptors */ | 
|  | 256 | injd = snd_usb_find_csint_desc(alts->extra, alts->extralen, | 
|  | 257 | NULL, USB_MS_MIDI_IN_JACK); | 
|  | 258 | outjd = snd_usb_find_csint_desc(alts->extra, alts->extralen, | 
|  | 259 | NULL, USB_MS_MIDI_OUT_JACK); | 
|  | 260 | if (!injd && !outjd) | 
|  | 261 | return -ENODEV; | 
|  | 262 | if ((injd && !snd_usb_validate_midi_desc(injd)) || | 
|  | 263 | (outjd && !snd_usb_validate_midi_desc(outjd))) | 
|  | 264 | return -ENODEV; | 
|  | 265 | if (injd && (injd->bLength < 5 || | 
|  | 266 | (injd->bJackType != USB_MS_EMBEDDED && | 
|  | 267 | injd->bJackType != USB_MS_EXTERNAL))) | 
|  | 268 | return -ENODEV; | 
|  | 269 | if (outjd && (outjd->bLength < 6 || | 
|  | 270 | (outjd->bJackType != USB_MS_EMBEDDED && | 
|  | 271 | outjd->bJackType != USB_MS_EXTERNAL))) | 
|  | 272 | return -ENODEV; | 
|  | 273 | return create_any_midi_quirk(chip, iface, driver, &yamaha_midi_quirk); | 
|  | 274 | } | 
|  | 275 |  | 
|  | 276 | static int create_roland_midi_quirk(struct snd_usb_audio *chip, | 
|  | 277 | struct usb_interface *iface, | 
|  | 278 | struct usb_driver *driver, | 
|  | 279 | struct usb_host_interface *alts) | 
|  | 280 | { | 
|  | 281 | static const struct snd_usb_audio_quirk roland_midi_quirk = { | 
|  | 282 | .type = QUIRK_MIDI_ROLAND | 
|  | 283 | }; | 
|  | 284 | u8 *roland_desc = NULL; | 
|  | 285 |  | 
|  | 286 | /* might have a vendor-specific descriptor <06 24 F1 02 ...> */ | 
|  | 287 | for (;;) { | 
|  | 288 | roland_desc = snd_usb_find_csint_desc(alts->extra, | 
|  | 289 | alts->extralen, | 
|  | 290 | roland_desc, 0xf1); | 
|  | 291 | if (!roland_desc) | 
|  | 292 | return -ENODEV; | 
|  | 293 | if (roland_desc[0] < 6 || roland_desc[3] != 2) | 
|  | 294 | continue; | 
|  | 295 | return create_any_midi_quirk(chip, iface, driver, | 
|  | 296 | &roland_midi_quirk); | 
|  | 297 | } | 
|  | 298 | } | 
|  | 299 |  | 
|  | 300 | static int create_std_midi_quirk(struct snd_usb_audio *chip, | 
|  | 301 | struct usb_interface *iface, | 
|  | 302 | struct usb_driver *driver, | 
|  | 303 | struct usb_host_interface *alts) | 
|  | 304 | { | 
|  | 305 | struct usb_ms_header_descriptor *mshd; | 
|  | 306 | struct usb_ms_endpoint_descriptor *msepd; | 
|  | 307 |  | 
|  | 308 | /* must have the MIDIStreaming interface header descriptor*/ | 
|  | 309 | mshd = (struct usb_ms_header_descriptor *)alts->extra; | 
|  | 310 | if (alts->extralen < 7 || | 
|  | 311 | mshd->bLength < 7 || | 
|  | 312 | mshd->bDescriptorType != USB_DT_CS_INTERFACE || | 
|  | 313 | mshd->bDescriptorSubtype != USB_MS_HEADER) | 
|  | 314 | return -ENODEV; | 
|  | 315 | /* must have the MIDIStreaming endpoint descriptor*/ | 
|  | 316 | msepd = (struct usb_ms_endpoint_descriptor *)alts->endpoint[0].extra; | 
|  | 317 | if (alts->endpoint[0].extralen < 4 || | 
|  | 318 | msepd->bLength < 4 || | 
|  | 319 | msepd->bDescriptorType != USB_DT_CS_ENDPOINT || | 
|  | 320 | msepd->bDescriptorSubtype != UAC_MS_GENERAL || | 
|  | 321 | msepd->bNumEmbMIDIJack < 1 || | 
|  | 322 | msepd->bNumEmbMIDIJack > 16) | 
|  | 323 | return -ENODEV; | 
|  | 324 |  | 
|  | 325 | return create_any_midi_quirk(chip, iface, driver, NULL); | 
|  | 326 | } | 
|  | 327 |  | 
|  | 328 | static int create_auto_midi_quirk(struct snd_usb_audio *chip, | 
|  | 329 | struct usb_interface *iface, | 
|  | 330 | struct usb_driver *driver) | 
|  | 331 | { | 
|  | 332 | struct usb_host_interface *alts; | 
|  | 333 | struct usb_interface_descriptor *altsd; | 
|  | 334 | struct usb_endpoint_descriptor *epd; | 
|  | 335 | int err; | 
|  | 336 |  | 
|  | 337 | alts = &iface->altsetting[0]; | 
|  | 338 | altsd = get_iface_desc(alts); | 
|  | 339 |  | 
|  | 340 | /* must have at least one bulk/interrupt endpoint for streaming */ | 
|  | 341 | if (altsd->bNumEndpoints < 1) | 
|  | 342 | return -ENODEV; | 
|  | 343 | epd = get_endpoint(alts, 0); | 
|  | 344 | if (!usb_endpoint_xfer_bulk(epd) && | 
|  | 345 | !usb_endpoint_xfer_int(epd)) | 
|  | 346 | return -ENODEV; | 
|  | 347 |  | 
|  | 348 | switch (USB_ID_VENDOR(chip->usb_id)) { | 
|  | 349 | case 0x0499: /* Yamaha */ | 
|  | 350 | err = create_yamaha_midi_quirk(chip, iface, driver, alts); | 
|  | 351 | if (err != -ENODEV) | 
|  | 352 | return err; | 
|  | 353 | break; | 
|  | 354 | case 0x0582: /* Roland */ | 
|  | 355 | err = create_roland_midi_quirk(chip, iface, driver, alts); | 
|  | 356 | if (err != -ENODEV) | 
|  | 357 | return err; | 
|  | 358 | break; | 
|  | 359 | } | 
|  | 360 |  | 
|  | 361 | return create_std_midi_quirk(chip, iface, driver, alts); | 
|  | 362 | } | 
|  | 363 |  | 
|  | 364 | static int create_autodetect_quirk(struct snd_usb_audio *chip, | 
|  | 365 | struct usb_interface *iface, | 
|  | 366 | struct usb_driver *driver) | 
|  | 367 | { | 
|  | 368 | int err; | 
|  | 369 |  | 
|  | 370 | err = create_auto_pcm_quirk(chip, iface, driver); | 
|  | 371 | if (err == -ENODEV) | 
|  | 372 | err = create_auto_midi_quirk(chip, iface, driver); | 
|  | 373 | return err; | 
|  | 374 | } | 
|  | 375 |  | 
|  | 376 | static int create_autodetect_quirks(struct snd_usb_audio *chip, | 
|  | 377 | struct usb_interface *iface, | 
|  | 378 | struct usb_driver *driver, | 
|  | 379 | const struct snd_usb_audio_quirk *quirk) | 
|  | 380 | { | 
|  | 381 | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | 
|  | 382 | int ifcount, ifnum, err; | 
|  | 383 |  | 
|  | 384 | err = create_autodetect_quirk(chip, iface, driver); | 
|  | 385 | if (err < 0) | 
|  | 386 | return err; | 
|  | 387 |  | 
|  | 388 | /* | 
|  | 389 | * ALSA PCM playback/capture devices cannot be registered in two steps, | 
|  | 390 | * so we have to claim the other corresponding interface here. | 
|  | 391 | */ | 
|  | 392 | ifcount = chip->dev->actconfig->desc.bNumInterfaces; | 
|  | 393 | for (ifnum = 0; ifnum < ifcount; ifnum++) { | 
|  | 394 | if (ifnum == probed_ifnum || quirk->ifnum >= 0) | 
|  | 395 | continue; | 
|  | 396 | iface = usb_ifnum_to_if(chip->dev, ifnum); | 
|  | 397 | if (!iface || | 
|  | 398 | usb_interface_claimed(iface) || | 
|  | 399 | get_iface_desc(iface->altsetting)->bInterfaceClass != | 
|  | 400 | USB_CLASS_VENDOR_SPEC) | 
|  | 401 | continue; | 
|  | 402 |  | 
|  | 403 | err = create_autodetect_quirk(chip, iface, driver); | 
|  | 404 | if (err >= 0) | 
|  | 405 | usb_driver_claim_interface(driver, iface, (void *)-1L); | 
|  | 406 | } | 
|  | 407 |  | 
|  | 408 | return 0; | 
|  | 409 | } | 
|  | 410 |  | 
|  | 411 | /* | 
|  | 412 | * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. | 
|  | 413 | * The only way to detect the sample rate is by looking at wMaxPacketSize. | 
|  | 414 | */ | 
|  | 415 | static int create_uaxx_quirk(struct snd_usb_audio *chip, | 
|  | 416 | struct usb_interface *iface, | 
|  | 417 | struct usb_driver *driver, | 
|  | 418 | const struct snd_usb_audio_quirk *quirk) | 
|  | 419 | { | 
|  | 420 | static const struct audioformat ua_format = { | 
|  | 421 | .formats = SNDRV_PCM_FMTBIT_S24_3LE, | 
|  | 422 | .channels = 2, | 
|  | 423 | .fmt_type = UAC_FORMAT_TYPE_I, | 
|  | 424 | .altsetting = 1, | 
|  | 425 | .altset_idx = 1, | 
|  | 426 | .rates = SNDRV_PCM_RATE_CONTINUOUS, | 
|  | 427 | }; | 
|  | 428 | struct usb_host_interface *alts; | 
|  | 429 | struct usb_interface_descriptor *altsd; | 
|  | 430 | struct audioformat *fp; | 
|  | 431 | int stream, err; | 
|  | 432 |  | 
|  | 433 | /* both PCM and MIDI interfaces have 2 or more altsettings */ | 
|  | 434 | if (iface->num_altsetting < 2) | 
|  | 435 | return -ENXIO; | 
|  | 436 | alts = &iface->altsetting[1]; | 
|  | 437 | altsd = get_iface_desc(alts); | 
|  | 438 |  | 
|  | 439 | if (altsd->bNumEndpoints == 2) { | 
|  | 440 | static const struct snd_usb_midi_endpoint_info ua700_ep = { | 
|  | 441 | .out_cables = 0x0003, | 
|  | 442 | .in_cables  = 0x0003 | 
|  | 443 | }; | 
|  | 444 | static const struct snd_usb_audio_quirk ua700_quirk = { | 
|  | 445 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | 
|  | 446 | .data = &ua700_ep | 
|  | 447 | }; | 
|  | 448 | static const struct snd_usb_midi_endpoint_info uaxx_ep = { | 
|  | 449 | .out_cables = 0x0001, | 
|  | 450 | .in_cables  = 0x0001 | 
|  | 451 | }; | 
|  | 452 | static const struct snd_usb_audio_quirk uaxx_quirk = { | 
|  | 453 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | 
|  | 454 | .data = &uaxx_ep | 
|  | 455 | }; | 
|  | 456 | const struct snd_usb_audio_quirk *quirk = | 
|  | 457 | chip->usb_id == USB_ID(0x0582, 0x002b) | 
|  | 458 | ? &ua700_quirk : &uaxx_quirk; | 
|  | 459 | return __snd_usbmidi_create(chip->card, iface, | 
|  | 460 | &chip->midi_list, quirk, | 
|  | 461 | chip->usb_id); | 
|  | 462 | } | 
|  | 463 |  | 
|  | 464 | if (altsd->bNumEndpoints != 1) | 
|  | 465 | return -ENXIO; | 
|  | 466 |  | 
|  | 467 | fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL); | 
|  | 468 | if (!fp) | 
|  | 469 | return -ENOMEM; | 
|  | 470 |  | 
|  | 471 | fp->iface = altsd->bInterfaceNumber; | 
|  | 472 | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | 
|  | 473 | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | 
|  | 474 | fp->datainterval = 0; | 
|  | 475 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | 
|  | 476 | INIT_LIST_HEAD(&fp->list); | 
|  | 477 |  | 
|  | 478 | switch (fp->maxpacksize) { | 
|  | 479 | case 0x120: | 
|  | 480 | fp->rate_max = fp->rate_min = 44100; | 
|  | 481 | break; | 
|  | 482 | case 0x138: | 
|  | 483 | case 0x140: | 
|  | 484 | fp->rate_max = fp->rate_min = 48000; | 
|  | 485 | break; | 
|  | 486 | case 0x258: | 
|  | 487 | case 0x260: | 
|  | 488 | fp->rate_max = fp->rate_min = 96000; | 
|  | 489 | break; | 
|  | 490 | default: | 
|  | 491 | usb_audio_err(chip, "unknown sample rate\n"); | 
|  | 492 | kfree(fp); | 
|  | 493 | return -ENXIO; | 
|  | 494 | } | 
|  | 495 |  | 
|  | 496 | stream = (fp->endpoint & USB_DIR_IN) | 
|  | 497 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | 
|  | 498 | err = snd_usb_add_audio_stream(chip, stream, fp); | 
|  | 499 | if (err < 0) { | 
|  | 500 | list_del(&fp->list); /* unlink for avoiding double-free */ | 
|  | 501 | kfree(fp); | 
|  | 502 | return err; | 
|  | 503 | } | 
|  | 504 | usb_set_interface(chip->dev, fp->iface, 0); | 
|  | 505 | return 0; | 
|  | 506 | } | 
|  | 507 |  | 
|  | 508 | /* | 
|  | 509 | * Create a standard mixer for the specified interface. | 
|  | 510 | */ | 
|  | 511 | static int create_standard_mixer_quirk(struct snd_usb_audio *chip, | 
|  | 512 | struct usb_interface *iface, | 
|  | 513 | struct usb_driver *driver, | 
|  | 514 | const struct snd_usb_audio_quirk *quirk) | 
|  | 515 | { | 
|  | 516 | if (quirk->ifnum < 0) | 
|  | 517 | return 0; | 
|  | 518 |  | 
|  | 519 | return snd_usb_create_mixer(chip, quirk->ifnum, 0); | 
|  | 520 | } | 
|  | 521 |  | 
|  | 522 |  | 
|  | 523 | static int setup_fmt_after_resume_quirk(struct snd_usb_audio *chip, | 
|  | 524 | struct usb_interface *iface, | 
|  | 525 | struct usb_driver *driver, | 
|  | 526 | const struct snd_usb_audio_quirk *quirk) | 
|  | 527 | { | 
|  | 528 | chip->setup_fmt_after_resume_quirk = 1; | 
|  | 529 | return 1;	/* Continue with creating streams and mixer */ | 
|  | 530 | } | 
|  | 531 |  | 
|  | 532 | /* | 
|  | 533 | * audio-interface quirks | 
|  | 534 | * | 
|  | 535 | * returns zero if no standard audio/MIDI parsing is needed. | 
|  | 536 | * returns a positive value if standard audio/midi interfaces are parsed | 
|  | 537 | * after this. | 
|  | 538 | * returns a negative value at error. | 
|  | 539 | */ | 
|  | 540 | int snd_usb_create_quirk(struct snd_usb_audio *chip, | 
|  | 541 | struct usb_interface *iface, | 
|  | 542 | struct usb_driver *driver, | 
|  | 543 | const struct snd_usb_audio_quirk *quirk) | 
|  | 544 | { | 
|  | 545 | typedef int (*quirk_func_t)(struct snd_usb_audio *, | 
|  | 546 | struct usb_interface *, | 
|  | 547 | struct usb_driver *, | 
|  | 548 | const struct snd_usb_audio_quirk *); | 
|  | 549 | static const quirk_func_t quirk_funcs[] = { | 
|  | 550 | [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, | 
|  | 551 | [QUIRK_COMPOSITE] = create_composite_quirk, | 
|  | 552 | [QUIRK_AUTODETECT] = create_autodetect_quirks, | 
|  | 553 | [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, | 
|  | 554 | [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, | 
|  | 555 | [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, | 
|  | 556 | [QUIRK_MIDI_ROLAND] = create_any_midi_quirk, | 
|  | 557 | [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, | 
|  | 558 | [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, | 
|  | 559 | [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, | 
|  | 560 | [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, | 
|  | 561 | [QUIRK_MIDI_CME] = create_any_midi_quirk, | 
|  | 562 | [QUIRK_MIDI_AKAI] = create_any_midi_quirk, | 
|  | 563 | [QUIRK_MIDI_FTDI] = create_any_midi_quirk, | 
|  | 564 | [QUIRK_MIDI_CH345] = create_any_midi_quirk, | 
|  | 565 | [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, | 
|  | 566 | [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, | 
|  | 567 | [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, | 
|  | 568 | [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, | 
|  | 569 | [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, | 
|  | 570 | [QUIRK_SETUP_FMT_AFTER_RESUME] = setup_fmt_after_resume_quirk, | 
|  | 571 | }; | 
|  | 572 |  | 
|  | 573 | if (quirk->type < QUIRK_TYPE_COUNT) { | 
|  | 574 | return quirk_funcs[quirk->type](chip, iface, driver, quirk); | 
|  | 575 | } else { | 
|  | 576 | usb_audio_err(chip, "invalid quirk type %d\n", quirk->type); | 
|  | 577 | return -ENXIO; | 
|  | 578 | } | 
|  | 579 | } | 
|  | 580 |  | 
|  | 581 | /* | 
|  | 582 | * boot quirks | 
|  | 583 | */ | 
|  | 584 |  | 
|  | 585 | #define EXTIGY_FIRMWARE_SIZE_OLD 794 | 
|  | 586 | #define EXTIGY_FIRMWARE_SIZE_NEW 483 | 
|  | 587 |  | 
|  | 588 | static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) | 
|  | 589 | { | 
|  | 590 | struct usb_host_config *config = dev->actconfig; | 
|  | 591 | int err; | 
|  | 592 |  | 
|  | 593 | if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || | 
|  | 594 | le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { | 
|  | 595 | dev_dbg(&dev->dev, "sending Extigy boot sequence...\n"); | 
|  | 596 | /* Send message to force it to reconnect with full interface. */ | 
|  | 597 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), | 
|  | 598 | 0x10, 0x43, 0x0001, 0x000a, NULL, 0); | 
|  | 599 | if (err < 0) | 
|  | 600 | dev_dbg(&dev->dev, "error sending boot message: %d\n", err); | 
|  | 601 | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | 
|  | 602 | &dev->descriptor, sizeof(dev->descriptor)); | 
|  | 603 | config = dev->actconfig; | 
|  | 604 | if (err < 0) | 
|  | 605 | dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); | 
|  | 606 | err = usb_reset_configuration(dev); | 
|  | 607 | if (err < 0) | 
|  | 608 | dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); | 
|  | 609 | dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n", | 
|  | 610 | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | 
|  | 611 | return -ENODEV; /* quit this anyway */ | 
|  | 612 | } | 
|  | 613 | return 0; | 
|  | 614 | } | 
|  | 615 |  | 
|  | 616 | static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) | 
|  | 617 | { | 
|  | 618 | u8 buf = 1; | 
|  | 619 |  | 
|  | 620 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, | 
|  | 621 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, | 
|  | 622 | 0, 0, &buf, 1); | 
|  | 623 | if (buf == 0) { | 
|  | 624 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, | 
|  | 625 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, | 
|  | 626 | 1, 2000, NULL, 0); | 
|  | 627 | return -ENODEV; | 
|  | 628 | } | 
|  | 629 | return 0; | 
|  | 630 | } | 
|  | 631 |  | 
|  | 632 | static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) | 
|  | 633 | { | 
|  | 634 | int err; | 
|  | 635 |  | 
|  | 636 | if (dev->actconfig->desc.bConfigurationValue == 1) { | 
|  | 637 | dev_info(&dev->dev, | 
|  | 638 | "Fast Track Pro switching to config #2\n"); | 
|  | 639 | /* This function has to be available by the usb core module. | 
|  | 640 | * if it is not avialable the boot quirk has to be left out | 
|  | 641 | * and the configuration has to be set by udev or hotplug | 
|  | 642 | * rules | 
|  | 643 | */ | 
|  | 644 | err = usb_driver_set_configuration(dev, 2); | 
|  | 645 | if (err < 0) | 
|  | 646 | dev_dbg(&dev->dev, | 
|  | 647 | "error usb_driver_set_configuration: %d\n", | 
|  | 648 | err); | 
|  | 649 | /* Always return an error, so that we stop creating a device | 
|  | 650 | that will just be destroyed and recreated with a new | 
|  | 651 | configuration */ | 
|  | 652 | return -ENODEV; | 
|  | 653 | } else | 
|  | 654 | dev_info(&dev->dev, "Fast Track Pro config OK\n"); | 
|  | 655 |  | 
|  | 656 | return 0; | 
|  | 657 | } | 
|  | 658 |  | 
|  | 659 | /* | 
|  | 660 | * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely | 
|  | 661 | * documented in the device's data sheet. | 
|  | 662 | */ | 
|  | 663 | static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) | 
|  | 664 | { | 
|  | 665 | u8 buf[4]; | 
|  | 666 | buf[0] = 0x20; | 
|  | 667 | buf[1] = value & 0xff; | 
|  | 668 | buf[2] = (value >> 8) & 0xff; | 
|  | 669 | buf[3] = reg; | 
|  | 670 | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, | 
|  | 671 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | 672 | 0, 0, &buf, 4); | 
|  | 673 | } | 
|  | 674 |  | 
|  | 675 | static int snd_usb_cm106_boot_quirk(struct usb_device *dev) | 
|  | 676 | { | 
|  | 677 | /* | 
|  | 678 | * Enable line-out driver mode, set headphone source to front | 
|  | 679 | * channels, enable stereo mic. | 
|  | 680 | */ | 
|  | 681 | return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); | 
|  | 682 | } | 
|  | 683 |  | 
|  | 684 | /* | 
|  | 685 | * C-Media CM6206 is based on CM106 with two additional | 
|  | 686 | * registers that are not documented in the data sheet. | 
|  | 687 | * Values here are chosen based on sniffing USB traffic | 
|  | 688 | * under Windows. | 
|  | 689 | */ | 
|  | 690 | static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) | 
|  | 691 | { | 
|  | 692 | int err  = 0, reg; | 
|  | 693 | int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; | 
|  | 694 |  | 
|  | 695 | for (reg = 0; reg < ARRAY_SIZE(val); reg++) { | 
|  | 696 | err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); | 
|  | 697 | if (err < 0) | 
|  | 698 | return err; | 
|  | 699 | } | 
|  | 700 |  | 
|  | 701 | return err; | 
|  | 702 | } | 
|  | 703 |  | 
|  | 704 | /* quirk for Plantronics GameCom 780 with CM6302 chip */ | 
|  | 705 | static int snd_usb_gamecon780_boot_quirk(struct usb_device *dev) | 
|  | 706 | { | 
|  | 707 | /* set the initial volume and don't change; other values are either | 
|  | 708 | * too loud or silent due to firmware bug (bko#65251) | 
|  | 709 | */ | 
|  | 710 | u8 buf[2] = { 0x74, 0xe3 }; | 
|  | 711 | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, | 
|  | 712 | USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, | 
|  | 713 | UAC_FU_VOLUME << 8, 9 << 8, buf, 2); | 
|  | 714 | } | 
|  | 715 |  | 
|  | 716 | /* | 
|  | 717 | * Novation Twitch DJ controller | 
|  | 718 | * Focusrite Novation Saffire 6 USB audio card | 
|  | 719 | */ | 
|  | 720 | static int snd_usb_novation_boot_quirk(struct usb_device *dev) | 
|  | 721 | { | 
|  | 722 | /* preemptively set up the device because otherwise the | 
|  | 723 | * raw MIDI endpoints are not active */ | 
|  | 724 | usb_set_interface(dev, 0, 1); | 
|  | 725 | return 0; | 
|  | 726 | } | 
|  | 727 |  | 
|  | 728 | /* | 
|  | 729 | * This call will put the synth in "USB send" mode, i.e it will send MIDI | 
|  | 730 | * messages through USB (this is disabled at startup). The synth will | 
|  | 731 | * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB | 
|  | 732 | * sign on its LCD. Values here are chosen based on sniffing USB traffic | 
|  | 733 | * under Windows. | 
|  | 734 | */ | 
|  | 735 | static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) | 
|  | 736 | { | 
|  | 737 | int err, actual_length; | 
|  | 738 |  | 
|  | 739 | /* "midi send" enable */ | 
|  | 740 | static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; | 
|  | 741 |  | 
|  | 742 | void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); | 
|  | 743 | if (!buf) | 
|  | 744 | return -ENOMEM; | 
|  | 745 | err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, | 
|  | 746 | ARRAY_SIZE(seq), &actual_length, 1000); | 
|  | 747 | kfree(buf); | 
|  | 748 | if (err < 0) | 
|  | 749 | return err; | 
|  | 750 |  | 
|  | 751 | return 0; | 
|  | 752 | } | 
|  | 753 |  | 
|  | 754 | /* | 
|  | 755 | * Some sound cards from Native Instruments are in fact compliant to the USB | 
|  | 756 | * audio standard of version 2 and other approved USB standards, even though | 
|  | 757 | * they come up as vendor-specific device when first connected. | 
|  | 758 | * | 
|  | 759 | * However, they can be told to come up with a new set of descriptors | 
|  | 760 | * upon their next enumeration, and the interfaces announced by the new | 
|  | 761 | * descriptors will then be handled by the kernel's class drivers. As the | 
|  | 762 | * product ID will also change, no further checks are required. | 
|  | 763 | */ | 
|  | 764 |  | 
|  | 765 | static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) | 
|  | 766 | { | 
|  | 767 | int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 768 | 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | 769 | 1, 0, NULL, 0, 1000); | 
|  | 770 |  | 
|  | 771 | if (ret < 0) | 
|  | 772 | return ret; | 
|  | 773 |  | 
|  | 774 | usb_reset_device(dev); | 
|  | 775 |  | 
|  | 776 | /* return -EAGAIN, so the creation of an audio interface for this | 
|  | 777 | * temporary device is aborted. The device will reconnect with a | 
|  | 778 | * new product ID */ | 
|  | 779 | return -EAGAIN; | 
|  | 780 | } | 
|  | 781 |  | 
|  | 782 | static void mbox2_setup_48_24_magic(struct usb_device *dev) | 
|  | 783 | { | 
|  | 784 | u8 srate[3]; | 
|  | 785 | u8 temp[12]; | 
|  | 786 |  | 
|  | 787 | /* Choose 48000Hz permanently */ | 
|  | 788 | srate[0] = 0x80; | 
|  | 789 | srate[1] = 0xbb; | 
|  | 790 | srate[2] = 0x00; | 
|  | 791 |  | 
|  | 792 | /* Send the magic! */ | 
|  | 793 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 794 | 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); | 
|  | 795 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 796 | 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); | 
|  | 797 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 798 | 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); | 
|  | 799 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 800 | 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); | 
|  | 801 | return; | 
|  | 802 | } | 
|  | 803 |  | 
|  | 804 | /* Digidesign Mbox 2 needs to load firmware onboard | 
|  | 805 | * and driver must wait a few seconds for initialisation. | 
|  | 806 | */ | 
|  | 807 |  | 
|  | 808 | #define MBOX2_FIRMWARE_SIZE    646 | 
|  | 809 | #define MBOX2_BOOT_LOADING     0x01 /* Hard coded into the device */ | 
|  | 810 | #define MBOX2_BOOT_READY       0x02 /* Hard coded into the device */ | 
|  | 811 |  | 
|  | 812 | static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) | 
|  | 813 | { | 
|  | 814 | struct usb_host_config *config = dev->actconfig; | 
|  | 815 | int err; | 
|  | 816 | u8 bootresponse[0x12]; | 
|  | 817 | int fwsize; | 
|  | 818 | int count; | 
|  | 819 |  | 
|  | 820 | fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength); | 
|  | 821 |  | 
|  | 822 | if (fwsize != MBOX2_FIRMWARE_SIZE) { | 
|  | 823 | dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize); | 
|  | 824 | return -ENODEV; | 
|  | 825 | } | 
|  | 826 |  | 
|  | 827 | dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n"); | 
|  | 828 |  | 
|  | 829 | count = 0; | 
|  | 830 | bootresponse[0] = MBOX2_BOOT_LOADING; | 
|  | 831 | while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { | 
|  | 832 | msleep(500); /* 0.5 second delay */ | 
|  | 833 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | 
|  | 834 | /* Control magic - load onboard firmware */ | 
|  | 835 | 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); | 
|  | 836 | if (bootresponse[0] == MBOX2_BOOT_READY) | 
|  | 837 | break; | 
|  | 838 | dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n"); | 
|  | 839 | count++; | 
|  | 840 | } | 
|  | 841 |  | 
|  | 842 | if (bootresponse[0] != MBOX2_BOOT_READY) { | 
|  | 843 | dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); | 
|  | 844 | return -ENODEV; | 
|  | 845 | } | 
|  | 846 |  | 
|  | 847 | dev_dbg(&dev->dev, "device initialised!\n"); | 
|  | 848 |  | 
|  | 849 | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | 
|  | 850 | &dev->descriptor, sizeof(dev->descriptor)); | 
|  | 851 | config = dev->actconfig; | 
|  | 852 | if (err < 0) | 
|  | 853 | dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); | 
|  | 854 |  | 
|  | 855 | err = usb_reset_configuration(dev); | 
|  | 856 | if (err < 0) | 
|  | 857 | dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); | 
|  | 858 | dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n", | 
|  | 859 | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); | 
|  | 860 |  | 
|  | 861 | mbox2_setup_48_24_magic(dev); | 
|  | 862 |  | 
|  | 863 | dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz"); | 
|  | 864 |  | 
|  | 865 | return 0; /* Successful boot */ | 
|  | 866 | } | 
|  | 867 |  | 
|  | 868 | static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) | 
|  | 869 | { | 
|  | 870 | int err; | 
|  | 871 |  | 
|  | 872 | dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n"); | 
|  | 873 |  | 
|  | 874 | /* If the Axe-Fx III has not fully booted, it will timeout when trying | 
|  | 875 | * to enable the audio streaming interface. A more generous timeout is | 
|  | 876 | * used here to detect when the Axe-Fx III has finished booting as the | 
|  | 877 | * set interface message will be acked once it has | 
|  | 878 | */ | 
|  | 879 | err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | 
|  | 880 | USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, | 
|  | 881 | 1, 1, NULL, 0, 120000); | 
|  | 882 | if (err < 0) { | 
|  | 883 | dev_err(&dev->dev, | 
|  | 884 | "failed waiting for Axe-Fx III to boot: %d\n", err); | 
|  | 885 | return err; | 
|  | 886 | } | 
|  | 887 |  | 
|  | 888 | dev_dbg(&dev->dev, "Axe-Fx III is now ready\n"); | 
|  | 889 |  | 
|  | 890 | err = usb_set_interface(dev, 1, 0); | 
|  | 891 | if (err < 0) | 
|  | 892 | dev_dbg(&dev->dev, | 
|  | 893 | "error stopping Axe-Fx III interface: %d\n", err); | 
|  | 894 |  | 
|  | 895 | return 0; | 
|  | 896 | } | 
|  | 897 |  | 
|  | 898 | /* | 
|  | 899 | * Setup quirks | 
|  | 900 | */ | 
|  | 901 | #define MAUDIO_SET		0x01 /* parse device_setup */ | 
|  | 902 | #define MAUDIO_SET_COMPATIBLE	0x80 /* use only "win-compatible" interfaces */ | 
|  | 903 | #define MAUDIO_SET_DTS		0x02 /* enable DTS Digital Output */ | 
|  | 904 | #define MAUDIO_SET_96K		0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */ | 
|  | 905 | #define MAUDIO_SET_24B		0x08 /* 24bits sample if set, 16bits otherwise */ | 
|  | 906 | #define MAUDIO_SET_DI		0x10 /* enable Digital Input */ | 
|  | 907 | #define MAUDIO_SET_MASK		0x1f /* bit mask for setup value */ | 
|  | 908 | #define MAUDIO_SET_24B_48K_DI	 0x19 /* 24bits+48KHz+Digital Input */ | 
|  | 909 | #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */ | 
|  | 910 | #define MAUDIO_SET_16B_48K_DI	 0x11 /* 16bits+48KHz+Digital Input */ | 
|  | 911 | #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */ | 
|  | 912 |  | 
|  | 913 | static int quattro_skip_setting_quirk(struct snd_usb_audio *chip, | 
|  | 914 | int iface, int altno) | 
|  | 915 | { | 
|  | 916 | /* Reset ALL ifaces to 0 altsetting. | 
|  | 917 | * Call it for every possible altsetting of every interface. | 
|  | 918 | */ | 
|  | 919 | usb_set_interface(chip->dev, iface, 0); | 
|  | 920 | if (chip->setup & MAUDIO_SET) { | 
|  | 921 | if (chip->setup & MAUDIO_SET_COMPATIBLE) { | 
|  | 922 | if (iface != 1 && iface != 2) | 
|  | 923 | return 1; /* skip all interfaces but 1 and 2 */ | 
|  | 924 | } else { | 
|  | 925 | unsigned int mask; | 
|  | 926 | if (iface == 1 || iface == 2) | 
|  | 927 | return 1; /* skip interfaces 1 and 2 */ | 
|  | 928 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | 
|  | 929 | return 1; /* skip this altsetting */ | 
|  | 930 | mask = chip->setup & MAUDIO_SET_MASK; | 
|  | 931 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | 
|  | 932 | return 1; /* skip this altsetting */ | 
|  | 933 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | 
|  | 934 | return 1; /* skip this altsetting */ | 
|  | 935 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4) | 
|  | 936 | return 1; /* skip this altsetting */ | 
|  | 937 | } | 
|  | 938 | } | 
|  | 939 | usb_audio_dbg(chip, | 
|  | 940 | "using altsetting %d for interface %d config %d\n", | 
|  | 941 | altno, iface, chip->setup); | 
|  | 942 | return 0; /* keep this altsetting */ | 
|  | 943 | } | 
|  | 944 |  | 
|  | 945 | static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, | 
|  | 946 | int iface, | 
|  | 947 | int altno) | 
|  | 948 | { | 
|  | 949 | /* Reset ALL ifaces to 0 altsetting. | 
|  | 950 | * Call it for every possible altsetting of every interface. | 
|  | 951 | */ | 
|  | 952 | usb_set_interface(chip->dev, iface, 0); | 
|  | 953 |  | 
|  | 954 | if (chip->setup & MAUDIO_SET) { | 
|  | 955 | unsigned int mask; | 
|  | 956 | if ((chip->setup & MAUDIO_SET_DTS) && altno != 6) | 
|  | 957 | return 1; /* skip this altsetting */ | 
|  | 958 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | 
|  | 959 | return 1; /* skip this altsetting */ | 
|  | 960 | mask = chip->setup & MAUDIO_SET_MASK; | 
|  | 961 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | 
|  | 962 | return 1; /* skip this altsetting */ | 
|  | 963 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | 
|  | 964 | return 1; /* skip this altsetting */ | 
|  | 965 | if (mask == MAUDIO_SET_16B_48K_DI && altno != 4) | 
|  | 966 | return 1; /* skip this altsetting */ | 
|  | 967 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5) | 
|  | 968 | return 1; /* skip this altsetting */ | 
|  | 969 | } | 
|  | 970 |  | 
|  | 971 | return 0; /* keep this altsetting */ | 
|  | 972 | } | 
|  | 973 |  | 
|  | 974 | static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, | 
|  | 975 | int iface, int altno) | 
|  | 976 | { | 
|  | 977 | /* Reset ALL ifaces to 0 altsetting. | 
|  | 978 | * Call it for every possible altsetting of every interface. | 
|  | 979 | */ | 
|  | 980 | usb_set_interface(chip->dev, iface, 0); | 
|  | 981 |  | 
|  | 982 | /* possible configuration where both inputs and only one output is | 
|  | 983 | *used is not supported by the current setup | 
|  | 984 | */ | 
|  | 985 | if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) { | 
|  | 986 | if (chip->setup & MAUDIO_SET_96K) { | 
|  | 987 | if (altno != 3 && altno != 6) | 
|  | 988 | return 1; | 
|  | 989 | } else if (chip->setup & MAUDIO_SET_DI) { | 
|  | 990 | if (iface == 4) | 
|  | 991 | return 1; /* no analog input */ | 
|  | 992 | if (altno != 2 && altno != 5) | 
|  | 993 | return 1; /* enable only altsets 2 and 5 */ | 
|  | 994 | } else { | 
|  | 995 | if (iface == 5) | 
|  | 996 | return 1; /* disable digialt input */ | 
|  | 997 | if (altno != 2 && altno != 5) | 
|  | 998 | return 1; /* enalbe only altsets 2 and 5 */ | 
|  | 999 | } | 
|  | 1000 | } else { | 
|  | 1001 | /* keep only 16-Bit mode */ | 
|  | 1002 | if (altno != 1) | 
|  | 1003 | return 1; | 
|  | 1004 | } | 
|  | 1005 |  | 
|  | 1006 | usb_audio_dbg(chip, | 
|  | 1007 | "using altsetting %d for interface %d config %d\n", | 
|  | 1008 | altno, iface, chip->setup); | 
|  | 1009 | return 0; /* keep this altsetting */ | 
|  | 1010 | } | 
|  | 1011 |  | 
|  | 1012 | int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, | 
|  | 1013 | int iface, | 
|  | 1014 | int altno) | 
|  | 1015 | { | 
|  | 1016 | /* audiophile usb: skip altsets incompatible with device_setup */ | 
|  | 1017 | if (chip->usb_id == USB_ID(0x0763, 0x2003)) | 
|  | 1018 | return audiophile_skip_setting_quirk(chip, iface, altno); | 
|  | 1019 | /* quattro usb: skip altsets incompatible with device_setup */ | 
|  | 1020 | if (chip->usb_id == USB_ID(0x0763, 0x2001)) | 
|  | 1021 | return quattro_skip_setting_quirk(chip, iface, altno); | 
|  | 1022 | /* fasttrackpro usb: skip altsets incompatible with device_setup */ | 
|  | 1023 | if (chip->usb_id == USB_ID(0x0763, 0x2012)) | 
|  | 1024 | return fasttrackpro_skip_setting_quirk(chip, iface, altno); | 
|  | 1025 |  | 
|  | 1026 | return 0; | 
|  | 1027 | } | 
|  | 1028 |  | 
|  | 1029 | int snd_usb_apply_boot_quirk(struct usb_device *dev, | 
|  | 1030 | struct usb_interface *intf, | 
|  | 1031 | const struct snd_usb_audio_quirk *quirk, | 
|  | 1032 | unsigned int id) | 
|  | 1033 | { | 
|  | 1034 | switch (id) { | 
|  | 1035 | case USB_ID(0x041e, 0x3000): | 
|  | 1036 | /* SB Extigy needs special boot-up sequence */ | 
|  | 1037 | /* if more models come, this will go to the quirk list. */ | 
|  | 1038 | return snd_usb_extigy_boot_quirk(dev, intf); | 
|  | 1039 |  | 
|  | 1040 | case USB_ID(0x041e, 0x3020): | 
|  | 1041 | /* SB Audigy 2 NX needs its own boot-up magic, too */ | 
|  | 1042 | return snd_usb_audigy2nx_boot_quirk(dev); | 
|  | 1043 |  | 
|  | 1044 | case USB_ID(0x10f5, 0x0200): | 
|  | 1045 | /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ | 
|  | 1046 | return snd_usb_cm106_boot_quirk(dev); | 
|  | 1047 |  | 
|  | 1048 | case USB_ID(0x0d8c, 0x0102): | 
|  | 1049 | /* C-Media CM6206 / CM106-Like Sound Device */ | 
|  | 1050 | case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ | 
|  | 1051 | return snd_usb_cm6206_boot_quirk(dev); | 
|  | 1052 |  | 
|  | 1053 | case USB_ID(0x0dba, 0x3000): | 
|  | 1054 | /* Digidesign Mbox 2 */ | 
|  | 1055 | return snd_usb_mbox2_boot_quirk(dev); | 
|  | 1056 |  | 
|  | 1057 | case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ | 
|  | 1058 | case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ | 
|  | 1059 | return snd_usb_novation_boot_quirk(dev); | 
|  | 1060 |  | 
|  | 1061 | case USB_ID(0x133e, 0x0815): | 
|  | 1062 | /* Access Music VirusTI Desktop */ | 
|  | 1063 | return snd_usb_accessmusic_boot_quirk(dev); | 
|  | 1064 |  | 
|  | 1065 | case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ | 
|  | 1066 | case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ | 
|  | 1067 | case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ | 
|  | 1068 | return snd_usb_nativeinstruments_boot_quirk(dev); | 
|  | 1069 | case USB_ID(0x0763, 0x2012):  /* M-Audio Fast Track Pro USB */ | 
|  | 1070 | return snd_usb_fasttrackpro_boot_quirk(dev); | 
|  | 1071 | case USB_ID(0x047f, 0xc010): /* Plantronics Gamecom 780 */ | 
|  | 1072 | return snd_usb_gamecon780_boot_quirk(dev); | 
|  | 1073 | case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ | 
|  | 1074 | return snd_usb_axefx3_boot_quirk(dev); | 
|  | 1075 | } | 
|  | 1076 |  | 
|  | 1077 | return 0; | 
|  | 1078 | } | 
|  | 1079 |  | 
|  | 1080 | /* | 
|  | 1081 | * check if the device uses big-endian samples | 
|  | 1082 | */ | 
|  | 1083 | int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) | 
|  | 1084 | { | 
|  | 1085 | /* it depends on altsetting whether the device is big-endian or not */ | 
|  | 1086 | switch (chip->usb_id) { | 
|  | 1087 | case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ | 
|  | 1088 | if (fp->altsetting == 2 || fp->altsetting == 3 || | 
|  | 1089 | fp->altsetting == 5 || fp->altsetting == 6) | 
|  | 1090 | return 1; | 
|  | 1091 | break; | 
|  | 1092 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | 
|  | 1093 | if (chip->setup == 0x00 || | 
|  | 1094 | fp->altsetting == 1 || fp->altsetting == 2 || | 
|  | 1095 | fp->altsetting == 3) | 
|  | 1096 | return 1; | 
|  | 1097 | break; | 
|  | 1098 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */ | 
|  | 1099 | if (fp->altsetting == 2 || fp->altsetting == 3 || | 
|  | 1100 | fp->altsetting == 5 || fp->altsetting == 6) | 
|  | 1101 | return 1; | 
|  | 1102 | break; | 
|  | 1103 | } | 
|  | 1104 | return 0; | 
|  | 1105 | } | 
|  | 1106 |  | 
|  | 1107 | /* | 
|  | 1108 | * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, | 
|  | 1109 | * not for interface. | 
|  | 1110 | */ | 
|  | 1111 |  | 
|  | 1112 | enum { | 
|  | 1113 | EMU_QUIRK_SR_44100HZ = 0, | 
|  | 1114 | EMU_QUIRK_SR_48000HZ, | 
|  | 1115 | EMU_QUIRK_SR_88200HZ, | 
|  | 1116 | EMU_QUIRK_SR_96000HZ, | 
|  | 1117 | EMU_QUIRK_SR_176400HZ, | 
|  | 1118 | EMU_QUIRK_SR_192000HZ | 
|  | 1119 | }; | 
|  | 1120 |  | 
|  | 1121 | static void set_format_emu_quirk(struct snd_usb_substream *subs, | 
|  | 1122 | struct audioformat *fmt) | 
|  | 1123 | { | 
|  | 1124 | unsigned char emu_samplerate_id = 0; | 
|  | 1125 |  | 
|  | 1126 | /* When capture is active | 
|  | 1127 | * sample rate shouldn't be changed | 
|  | 1128 | * by playback substream | 
|  | 1129 | */ | 
|  | 1130 | if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | 
|  | 1131 | if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) | 
|  | 1132 | return; | 
|  | 1133 | } | 
|  | 1134 |  | 
|  | 1135 | switch (fmt->rate_min) { | 
|  | 1136 | case 48000: | 
|  | 1137 | emu_samplerate_id = EMU_QUIRK_SR_48000HZ; | 
|  | 1138 | break; | 
|  | 1139 | case 88200: | 
|  | 1140 | emu_samplerate_id = EMU_QUIRK_SR_88200HZ; | 
|  | 1141 | break; | 
|  | 1142 | case 96000: | 
|  | 1143 | emu_samplerate_id = EMU_QUIRK_SR_96000HZ; | 
|  | 1144 | break; | 
|  | 1145 | case 176400: | 
|  | 1146 | emu_samplerate_id = EMU_QUIRK_SR_176400HZ; | 
|  | 1147 | break; | 
|  | 1148 | case 192000: | 
|  | 1149 | emu_samplerate_id = EMU_QUIRK_SR_192000HZ; | 
|  | 1150 | break; | 
|  | 1151 | default: | 
|  | 1152 | emu_samplerate_id = EMU_QUIRK_SR_44100HZ; | 
|  | 1153 | break; | 
|  | 1154 | } | 
|  | 1155 | snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); | 
|  | 1156 | subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; | 
|  | 1157 | } | 
|  | 1158 |  | 
|  | 1159 | void snd_usb_set_format_quirk(struct snd_usb_substream *subs, | 
|  | 1160 | struct audioformat *fmt) | 
|  | 1161 | { | 
|  | 1162 | switch (subs->stream->chip->usb_id) { | 
|  | 1163 | case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ | 
|  | 1164 | case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ | 
|  | 1165 | case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ | 
|  | 1166 | case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ | 
|  | 1167 | set_format_emu_quirk(subs, fmt); | 
|  | 1168 | break; | 
|  | 1169 | } | 
|  | 1170 | } | 
|  | 1171 |  | 
|  | 1172 | bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) | 
|  | 1173 | { | 
|  | 1174 | /* devices which do not support reading the sample rate. */ | 
|  | 1175 | switch (chip->usb_id) { | 
|  | 1176 | case USB_ID(0x041E, 0x4080): /* Creative Live Cam VF0610 */ | 
|  | 1177 | case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ | 
|  | 1178 | case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */ | 
|  | 1179 | case USB_ID(0x05A3, 0x9420): /* ELP HD USB Camera */ | 
|  | 1180 | case USB_ID(0x05a7, 0x1020): /* Bose Companion 5 */ | 
|  | 1181 | case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ | 
|  | 1182 | case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */ | 
|  | 1183 | case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ | 
|  | 1184 | case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */ | 
|  | 1185 | return true; | 
|  | 1186 | } | 
|  | 1187 |  | 
|  | 1188 | /* devices of these vendors don't support reading rate, either */ | 
|  | 1189 | switch (USB_ID_VENDOR(chip->usb_id)) { | 
|  | 1190 | case 0x045E: /* MS Lifecam */ | 
|  | 1191 | case 0x047F: /* Plantronics */ | 
|  | 1192 | case 0x1de7: /* Phoenix Audio */ | 
|  | 1193 | return true; | 
|  | 1194 | } | 
|  | 1195 |  | 
|  | 1196 | return false; | 
|  | 1197 | } | 
|  | 1198 |  | 
|  | 1199 | /* ITF-USB DSD based DACs need a vendor cmd to switch | 
|  | 1200 | * between PCM and native DSD mode | 
|  | 1201 | */ | 
|  | 1202 | static bool is_itf_usb_dsd_dac(unsigned int id) | 
|  | 1203 | { | 
|  | 1204 | switch (id) { | 
|  | 1205 | case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */ | 
|  | 1206 | case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */ | 
|  | 1207 | case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */ | 
|  | 1208 | case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */ | 
|  | 1209 | case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-501V2/UD-503/NT-503 */ | 
|  | 1210 | case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */ | 
|  | 1211 | case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */ | 
|  | 1212 | return true; | 
|  | 1213 | } | 
|  | 1214 | return false; | 
|  | 1215 | } | 
|  | 1216 |  | 
|  | 1217 | int snd_usb_select_mode_quirk(struct snd_usb_substream *subs, | 
|  | 1218 | struct audioformat *fmt) | 
|  | 1219 | { | 
|  | 1220 | struct usb_device *dev = subs->dev; | 
|  | 1221 | int err; | 
|  | 1222 |  | 
|  | 1223 | if (is_itf_usb_dsd_dac(subs->stream->chip->usb_id)) { | 
|  | 1224 | /* First switch to alt set 0, otherwise the mode switch cmd | 
|  | 1225 | * will not be accepted by the DAC | 
|  | 1226 | */ | 
|  | 1227 | err = usb_set_interface(dev, fmt->iface, 0); | 
|  | 1228 | if (err < 0) | 
|  | 1229 | return err; | 
|  | 1230 |  | 
|  | 1231 | msleep(20); /* Delay needed after setting the interface */ | 
|  | 1232 |  | 
|  | 1233 | /* Vendor mode switch cmd is required. */ | 
|  | 1234 | if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) { | 
|  | 1235 | /* DSD mode (DSD_U32) requested */ | 
|  | 1236 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, | 
|  | 1237 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | 
|  | 1238 | 1, 1, NULL, 0); | 
|  | 1239 | if (err < 0) | 
|  | 1240 | return err; | 
|  | 1241 |  | 
|  | 1242 | } else { | 
|  | 1243 | /* PCM or DOP mode (S32) requested */ | 
|  | 1244 | /* PCM mode (S16) requested */ | 
|  | 1245 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, | 
|  | 1246 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | 
|  | 1247 | 0, 1, NULL, 0); | 
|  | 1248 | if (err < 0) | 
|  | 1249 | return err; | 
|  | 1250 |  | 
|  | 1251 | } | 
|  | 1252 | msleep(20); | 
|  | 1253 | } | 
|  | 1254 | return 0; | 
|  | 1255 | } | 
|  | 1256 |  | 
|  | 1257 | void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep) | 
|  | 1258 | { | 
|  | 1259 | /* | 
|  | 1260 | * "Playback Design" products send bogus feedback data at the start | 
|  | 1261 | * of the stream. Ignore them. | 
|  | 1262 | */ | 
|  | 1263 | if (USB_ID_VENDOR(ep->chip->usb_id) == 0x23ba && | 
|  | 1264 | ep->type == SND_USB_ENDPOINT_TYPE_SYNC) | 
|  | 1265 | ep->skip_packets = 4; | 
|  | 1266 |  | 
|  | 1267 | /* | 
|  | 1268 | * M-Audio Fast Track C400/C600 - when packets are not skipped, real | 
|  | 1269 | * world latency varies by approx. +/- 50 frames (at 96KHz) each time | 
|  | 1270 | * the stream is (re)started. When skipping packets 16 at endpoint | 
|  | 1271 | * start up, the real world latency is stable within +/- 1 frame (also | 
|  | 1272 | * across power cycles). | 
|  | 1273 | */ | 
|  | 1274 | if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) || | 
|  | 1275 | ep->chip->usb_id == USB_ID(0x0763, 0x2031)) && | 
|  | 1276 | ep->type == SND_USB_ENDPOINT_TYPE_DATA) | 
|  | 1277 | ep->skip_packets = 16; | 
|  | 1278 |  | 
|  | 1279 | /* Work around devices that report unreasonable feedback data */ | 
|  | 1280 | if ((ep->chip->usb_id == USB_ID(0x0644, 0x8038) ||  /* TEAC UD-H01 */ | 
|  | 1281 | ep->chip->usb_id == USB_ID(0x1852, 0x5034)) && /* T+A Dac8 */ | 
|  | 1282 | ep->syncmaxsize == 4) | 
|  | 1283 | ep->tenor_fb_quirk = 1; | 
|  | 1284 | } | 
|  | 1285 |  | 
|  | 1286 | void snd_usb_set_interface_quirk(struct usb_device *dev) | 
|  | 1287 | { | 
|  | 1288 | struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); | 
|  | 1289 |  | 
|  | 1290 | if (!chip) | 
|  | 1291 | return; | 
|  | 1292 | /* | 
|  | 1293 | * "Playback Design" products need a 50ms delay after setting the | 
|  | 1294 | * USB interface. | 
|  | 1295 | */ | 
|  | 1296 | switch (USB_ID_VENDOR(chip->usb_id)) { | 
|  | 1297 | case 0x23ba: /* Playback Design */ | 
|  | 1298 | case 0x0644: /* TEAC Corp. */ | 
|  | 1299 | msleep(50); | 
|  | 1300 | break; | 
|  | 1301 | } | 
|  | 1302 | } | 
|  | 1303 |  | 
|  | 1304 | /* quirk applied after snd_usb_ctl_msg(); not applied during boot quirks */ | 
|  | 1305 | void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, | 
|  | 1306 | __u8 request, __u8 requesttype, __u16 value, | 
|  | 1307 | __u16 index, void *data, __u16 size) | 
|  | 1308 | { | 
|  | 1309 | struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); | 
|  | 1310 |  | 
|  | 1311 | if (!chip) | 
|  | 1312 | return; | 
|  | 1313 | /* | 
|  | 1314 | * "Playback Design" products need a 20ms delay after each | 
|  | 1315 | * class compliant request | 
|  | 1316 | */ | 
|  | 1317 | if (USB_ID_VENDOR(chip->usb_id) == 0x23ba && | 
|  | 1318 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) | 
|  | 1319 | msleep(20); | 
|  | 1320 |  | 
|  | 1321 | /* | 
|  | 1322 | * "TEAC Corp." products need a 20ms delay after each | 
|  | 1323 | * class compliant request | 
|  | 1324 | */ | 
|  | 1325 | if (USB_ID_VENDOR(chip->usb_id) == 0x0644 && | 
|  | 1326 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) | 
|  | 1327 | msleep(20); | 
|  | 1328 |  | 
|  | 1329 | /* ITF-USB DSD based DACs functionality need a delay | 
|  | 1330 | * after each class compliant request | 
|  | 1331 | */ | 
|  | 1332 | if (is_itf_usb_dsd_dac(chip->usb_id) | 
|  | 1333 | && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) | 
|  | 1334 | msleep(20); | 
|  | 1335 |  | 
|  | 1336 | /* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here, | 
|  | 1337 | * otherwise requests like get/set frequency return as failed despite | 
|  | 1338 | * actually succeeding. | 
|  | 1339 | */ | 
|  | 1340 | if ((chip->usb_id == USB_ID(0x1686, 0x00dd) || | 
|  | 1341 | chip->usb_id == USB_ID(0x046d, 0x0a46) || | 
|  | 1342 | chip->usb_id == USB_ID(0x0b0e, 0x0349)) && | 
|  | 1343 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) | 
|  | 1344 | usleep_range(1000, 2000); | 
|  | 1345 | } | 
|  | 1346 |  | 
|  | 1347 | /* | 
|  | 1348 | * snd_usb_interface_dsd_format_quirks() is called from format.c to | 
|  | 1349 | * augment the PCM format bit-field for DSD types. The UAC standards | 
|  | 1350 | * don't have a designated bit field to denote DSD-capable interfaces, | 
|  | 1351 | * hence all hardware that is known to support this format has to be | 
|  | 1352 | * listed here. | 
|  | 1353 | */ | 
|  | 1354 | u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, | 
|  | 1355 | struct audioformat *fp, | 
|  | 1356 | unsigned int sample_bytes) | 
|  | 1357 | { | 
|  | 1358 | struct usb_interface *iface; | 
|  | 1359 |  | 
|  | 1360 | /* Playback Designs */ | 
|  | 1361 | if (USB_ID_VENDOR(chip->usb_id) == 0x23ba && | 
|  | 1362 | USB_ID_PRODUCT(chip->usb_id) < 0x0110) { | 
|  | 1363 | switch (fp->altsetting) { | 
|  | 1364 | case 1: | 
|  | 1365 | fp->dsd_dop = true; | 
|  | 1366 | return SNDRV_PCM_FMTBIT_DSD_U16_LE; | 
|  | 1367 | case 2: | 
|  | 1368 | fp->dsd_bitrev = true; | 
|  | 1369 | return SNDRV_PCM_FMTBIT_DSD_U8; | 
|  | 1370 | case 3: | 
|  | 1371 | fp->dsd_bitrev = true; | 
|  | 1372 | return SNDRV_PCM_FMTBIT_DSD_U16_LE; | 
|  | 1373 | } | 
|  | 1374 | } | 
|  | 1375 |  | 
|  | 1376 | /* XMOS based USB DACs */ | 
|  | 1377 | switch (chip->usb_id) { | 
|  | 1378 | case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */ | 
|  | 1379 | case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */ | 
|  | 1380 | case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */ | 
|  | 1381 | if (fp->altsetting == 2) | 
|  | 1382 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1383 | break; | 
|  | 1384 |  | 
|  | 1385 | case USB_ID(0x0d8c, 0x0316): /* Hegel HD12 DSD */ | 
|  | 1386 | case USB_ID(0x10cb, 0x0103): /* The Bit Opus #3; with fp->dsd_raw */ | 
|  | 1387 | case USB_ID(0x16b0, 0x06b2): /* NuPrime DAC-10 */ | 
|  | 1388 | case USB_ID(0x16d0, 0x09dd): /* Encore mDSD */ | 
|  | 1389 | case USB_ID(0x16d0, 0x0733): /* Furutech ADL Stratos */ | 
|  | 1390 | case USB_ID(0x16d0, 0x09db): /* NuPrime Audio DAC-9 */ | 
|  | 1391 | case USB_ID(0x1db5, 0x0003): /* Bryston BDA3 */ | 
|  | 1392 | case USB_ID(0x22e1, 0xca01): /* HDTA Serenade DSD */ | 
|  | 1393 | case USB_ID(0x249c, 0x9326): /* M2Tech Young MkIII */ | 
|  | 1394 | case USB_ID(0x2616, 0x0106): /* PS Audio NuWave DAC */ | 
|  | 1395 | case USB_ID(0x2622, 0x0041): /* Audiolab M-DAC+ */ | 
|  | 1396 | case USB_ID(0x27f7, 0x3002): /* W4S DAC-2v2SE */ | 
|  | 1397 | case USB_ID(0x29a2, 0x0086): /* Mutec MC3+ USB */ | 
|  | 1398 | case USB_ID(0x6b42, 0x0042): /* MSB Technology */ | 
|  | 1399 | if (fp->altsetting == 3) | 
|  | 1400 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1401 | break; | 
|  | 1402 |  | 
|  | 1403 | /* Amanero Combo384 USB based DACs with native DSD support */ | 
|  | 1404 | case USB_ID(0x16d0, 0x071a):  /* Amanero - Combo384 */ | 
|  | 1405 | case USB_ID(0x2ab6, 0x0004):  /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */ | 
|  | 1406 | case USB_ID(0x2ab6, 0x0005):  /* T+A USB HD Audio 1 */ | 
|  | 1407 | case USB_ID(0x2ab6, 0x0006):  /* T+A USB HD Audio 2 */ | 
|  | 1408 | if (fp->altsetting == 2) { | 
|  | 1409 | switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) { | 
|  | 1410 | case 0x199: | 
|  | 1411 | return SNDRV_PCM_FMTBIT_DSD_U32_LE; | 
|  | 1412 | case 0x19b: | 
|  | 1413 | case 0x203: | 
|  | 1414 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1415 | default: | 
|  | 1416 | break; | 
|  | 1417 | } | 
|  | 1418 | } | 
|  | 1419 | break; | 
|  | 1420 | case USB_ID(0x16d0, 0x0a23): | 
|  | 1421 | if (fp->altsetting == 2) | 
|  | 1422 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1423 | break; | 
|  | 1424 |  | 
|  | 1425 | default: | 
|  | 1426 | break; | 
|  | 1427 | } | 
|  | 1428 |  | 
|  | 1429 | /* ITF-USB DSD based DACs */ | 
|  | 1430 | if (is_itf_usb_dsd_dac(chip->usb_id)) { | 
|  | 1431 | iface = usb_ifnum_to_if(chip->dev, fp->iface); | 
|  | 1432 |  | 
|  | 1433 | /* Altsetting 2 support native DSD if the num of altsets is | 
|  | 1434 | * three (0-2), | 
|  | 1435 | * Altsetting 3 support native DSD if the num of altsets is | 
|  | 1436 | * four (0-3). | 
|  | 1437 | */ | 
|  | 1438 | if (fp->altsetting == iface->num_altsetting - 1) | 
|  | 1439 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1440 | } | 
|  | 1441 |  | 
|  | 1442 | /* Mostly generic method to detect many DSD-capable implementations - | 
|  | 1443 | * from XMOS/Thesycon | 
|  | 1444 | */ | 
|  | 1445 | switch (USB_ID_VENDOR(chip->usb_id)) { | 
|  | 1446 | case 0x152a:  /* Thesycon devices */ | 
|  | 1447 | case 0x20b1:  /* XMOS based devices */ | 
|  | 1448 | case 0x22d9:  /* Oppo */ | 
|  | 1449 | case 0x23ba:  /* Playback Designs */ | 
|  | 1450 | case 0x25ce:  /* Mytek devices */ | 
|  | 1451 | case 0x278b:  /* Rotel? */ | 
|  | 1452 | case 0x292b:  /* Gustard/Ess based devices */ | 
|  | 1453 | case 0x2ab6:  /* T+A devices */ | 
|  | 1454 | case 0x3842:  /* EVGA */ | 
|  | 1455 | case 0xc502:  /* HiBy devices */ | 
|  | 1456 | if (fp->dsd_raw) | 
|  | 1457 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | 
|  | 1458 | break; | 
|  | 1459 | default: | 
|  | 1460 | break; | 
|  | 1461 |  | 
|  | 1462 | } | 
|  | 1463 |  | 
|  | 1464 | return 0; | 
|  | 1465 | } | 
|  | 1466 |  | 
|  | 1467 | void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, | 
|  | 1468 | struct audioformat *fp, | 
|  | 1469 | int stream) | 
|  | 1470 | { | 
|  | 1471 | switch (chip->usb_id) { | 
|  | 1472 | case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */ | 
|  | 1473 | /* Optoplay sets the sample rate attribute although | 
|  | 1474 | * it seems not supporting it in fact. | 
|  | 1475 | */ | 
|  | 1476 | fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE; | 
|  | 1477 | break; | 
|  | 1478 | case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ | 
|  | 1479 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | 
|  | 1480 | /* doesn't set the sample rate attribute, but supports it */ | 
|  | 1481 | fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; | 
|  | 1482 | break; | 
|  | 1483 | case USB_ID(0x0763, 0x2001):  /* M-Audio Quattro USB */ | 
|  | 1484 | case USB_ID(0x0763, 0x2012):  /* M-Audio Fast Track Pro USB */ | 
|  | 1485 | case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ | 
|  | 1486 | case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is | 
|  | 1487 | an older model 77d:223) */ | 
|  | 1488 | /* | 
|  | 1489 | * plantronics headset and Griffin iMic have set adaptive-in | 
|  | 1490 | * although it's really not... | 
|  | 1491 | */ | 
|  | 1492 | fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE; | 
|  | 1493 | if (stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | 1494 | fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE; | 
|  | 1495 | else | 
|  | 1496 | fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; | 
|  | 1497 | break; | 
|  | 1498 | } | 
|  | 1499 | } |