| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * xhci-plat.c - xHCI host controller driver platform Bus Glue. |
| 4 | * |
| 5 | * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com |
| 6 | * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| 7 | * |
| 8 | * A lot of code borrowed from the Linux xHCI driver. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/clk.h> |
| 12 | #include <linux/dma-mapping.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/pci.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/of_device.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/usb/phy.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/acpi.h> |
| 21 | |
| 22 | #include "xhci.h" |
| 23 | #include "xhci-plat.h" |
| 24 | #include "xhci-mvebu.h" |
| 25 | #include "xhci-rcar.h" |
| 26 | |
| 27 | static struct hc_driver __read_mostly xhci_plat_hc_driver; |
| 28 | |
| 29 | static int xhci_plat_setup(struct usb_hcd *hcd); |
| 30 | static int xhci_plat_start(struct usb_hcd *hcd); |
| 31 | |
| 32 | static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { |
| 33 | .extra_priv_size = sizeof(struct xhci_plat_priv), |
| 34 | .reset = xhci_plat_setup, |
| 35 | .start = xhci_plat_start, |
| 36 | }; |
| 37 | |
| 38 | static void xhci_priv_plat_start(struct usb_hcd *hcd) |
| 39 | { |
| 40 | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| 41 | |
| 42 | if (priv->plat_start) |
| 43 | priv->plat_start(hcd); |
| 44 | } |
| 45 | |
| 46 | static int xhci_priv_init_quirk(struct usb_hcd *hcd) |
| 47 | { |
| 48 | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| 49 | |
| 50 | if (!priv->init_quirk) |
| 51 | return 0; |
| 52 | |
| 53 | return priv->init_quirk(hcd); |
| 54 | } |
| 55 | |
| 56 | static int xhci_priv_resume_quirk(struct usb_hcd *hcd) |
| 57 | { |
| 58 | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| 59 | |
| 60 | if (!priv->resume_quirk) |
| 61 | return 0; |
| 62 | |
| 63 | return priv->resume_quirk(hcd); |
| 64 | } |
| 65 | |
| 66 | static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) |
| 67 | { |
| 68 | /* |
| 69 | * As of now platform drivers don't provide MSI support so we ensure |
| 70 | * here that the generic code does not try to make a pci_dev from our |
| 71 | * dev struct in order to setup MSI |
| 72 | */ |
| 73 | xhci->quirks |= XHCI_PLAT; |
| 74 | } |
| 75 | |
| 76 | /* called during probe() after chip reset completes */ |
| 77 | static int xhci_plat_setup(struct usb_hcd *hcd) |
| 78 | { |
| 79 | int ret; |
| 80 | |
| 81 | |
| 82 | ret = xhci_priv_init_quirk(hcd); |
| 83 | if (ret) |
| 84 | return ret; |
| 85 | |
| 86 | return xhci_gen_setup(hcd, xhci_plat_quirks); |
| 87 | } |
| 88 | |
| 89 | static int xhci_plat_start(struct usb_hcd *hcd) |
| 90 | { |
| 91 | xhci_priv_plat_start(hcd); |
| 92 | return xhci_run(hcd); |
| 93 | } |
| 94 | |
| 95 | #ifdef CONFIG_OF |
| 96 | static const struct xhci_plat_priv xhci_plat_marvell_armada = { |
| 97 | .init_quirk = xhci_mvebu_mbus_init_quirk, |
| 98 | }; |
| 99 | |
| 100 | static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { |
| 101 | .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, |
| 102 | .init_quirk = xhci_rcar_init_quirk, |
| 103 | .plat_start = xhci_rcar_start, |
| 104 | .resume_quirk = xhci_rcar_resume_quirk, |
| 105 | }; |
| 106 | |
| 107 | static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { |
| 108 | .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, |
| 109 | .init_quirk = xhci_rcar_init_quirk, |
| 110 | .plat_start = xhci_rcar_start, |
| 111 | .resume_quirk = xhci_rcar_resume_quirk, |
| 112 | }; |
| 113 | |
| 114 | static const struct of_device_id usb_xhci_of_match[] = { |
| 115 | { |
| 116 | .compatible = "generic-xhci", |
| 117 | }, { |
| 118 | .compatible = "xhci-platform", |
| 119 | }, { |
| 120 | .compatible = "marvell,armada-375-xhci", |
| 121 | .data = &xhci_plat_marvell_armada, |
| 122 | }, { |
| 123 | .compatible = "marvell,armada-380-xhci", |
| 124 | .data = &xhci_plat_marvell_armada, |
| 125 | }, { |
| 126 | .compatible = "renesas,xhci-r8a7790", |
| 127 | .data = &xhci_plat_renesas_rcar_gen2, |
| 128 | }, { |
| 129 | .compatible = "renesas,xhci-r8a7791", |
| 130 | .data = &xhci_plat_renesas_rcar_gen2, |
| 131 | }, { |
| 132 | .compatible = "renesas,xhci-r8a7793", |
| 133 | .data = &xhci_plat_renesas_rcar_gen2, |
| 134 | }, { |
| 135 | .compatible = "renesas,xhci-r8a7795", |
| 136 | .data = &xhci_plat_renesas_rcar_gen3, |
| 137 | }, { |
| 138 | .compatible = "renesas,xhci-r8a7796", |
| 139 | .data = &xhci_plat_renesas_rcar_gen3, |
| 140 | }, { |
| 141 | .compatible = "renesas,rcar-gen2-xhci", |
| 142 | .data = &xhci_plat_renesas_rcar_gen2, |
| 143 | }, { |
| 144 | .compatible = "renesas,rcar-gen3-xhci", |
| 145 | .data = &xhci_plat_renesas_rcar_gen3, |
| 146 | }, |
| 147 | {}, |
| 148 | }; |
| 149 | MODULE_DEVICE_TABLE(of, usb_xhci_of_match); |
| 150 | #endif |
| 151 | |
| 152 | static int xhci_plat_probe(struct platform_device *pdev) |
| 153 | { |
| 154 | const struct xhci_plat_priv *priv_match; |
| 155 | const struct hc_driver *driver; |
| 156 | struct device *sysdev, *tmpdev; |
| 157 | struct xhci_hcd *xhci; |
| 158 | struct resource *res; |
| 159 | struct usb_hcd *hcd; |
| 160 | struct clk *clk; |
| 161 | struct clk *reg_clk; |
| 162 | int ret; |
| 163 | int irq; |
| 164 | |
| 165 | if (usb_disabled()) |
| 166 | return -ENODEV; |
| 167 | |
| 168 | driver = &xhci_plat_hc_driver; |
| 169 | |
| 170 | irq = platform_get_irq(pdev, 0); |
| 171 | if (irq < 0) |
| 172 | return irq; |
| 173 | |
| 174 | /* |
| 175 | * sysdev must point to a device that is known to the system firmware |
| 176 | * or PCI hardware. We handle these three cases here: |
| 177 | * 1. xhci_plat comes from firmware |
| 178 | * 2. xhci_plat is child of a device from firmware (dwc3-plat) |
| 179 | * 3. xhci_plat is grandchild of a pci device (dwc3-pci) |
| 180 | */ |
| 181 | for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) { |
| 182 | if (is_of_node(sysdev->fwnode) || |
| 183 | is_acpi_device_node(sysdev->fwnode)) |
| 184 | break; |
| 185 | #ifdef CONFIG_PCI |
| 186 | else if (sysdev->bus == &pci_bus_type) |
| 187 | break; |
| 188 | #endif |
| 189 | } |
| 190 | |
| 191 | if (!sysdev) |
| 192 | sysdev = &pdev->dev; |
| 193 | |
| 194 | /* Try to set 64-bit DMA first */ |
| 195 | if (WARN_ON(!sysdev->dma_mask)) |
| 196 | /* Platform did not initialize dma_mask */ |
| 197 | ret = dma_coerce_mask_and_coherent(sysdev, |
| 198 | DMA_BIT_MASK(64)); |
| 199 | else |
| 200 | ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); |
| 201 | |
| 202 | /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ |
| 203 | if (ret) { |
| 204 | ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); |
| 205 | if (ret) |
| 206 | return ret; |
| 207 | } |
| 208 | |
| 209 | pm_runtime_set_active(&pdev->dev); |
| 210 | pm_runtime_enable(&pdev->dev); |
| 211 | pm_runtime_get_noresume(&pdev->dev); |
| 212 | |
| 213 | hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, |
| 214 | dev_name(&pdev->dev), NULL); |
| 215 | if (!hcd) { |
| 216 | ret = -ENOMEM; |
| 217 | goto disable_runtime; |
| 218 | } |
| 219 | |
| 220 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 221 | hcd->regs = devm_ioremap_resource(&pdev->dev, res); |
| 222 | if (IS_ERR(hcd->regs)) { |
| 223 | ret = PTR_ERR(hcd->regs); |
| 224 | goto put_hcd; |
| 225 | } |
| 226 | |
| 227 | hcd->rsrc_start = res->start; |
| 228 | hcd->rsrc_len = resource_size(res); |
| 229 | |
| 230 | /* |
| 231 | * Not all platforms have clks so it is not an error if the |
| 232 | * clock do not exist. |
| 233 | */ |
| 234 | reg_clk = devm_clk_get(&pdev->dev, "reg"); |
| 235 | if (!IS_ERR(reg_clk)) { |
| 236 | ret = clk_prepare_enable(reg_clk); |
| 237 | if (ret) |
| 238 | goto put_hcd; |
| 239 | } else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) { |
| 240 | ret = -EPROBE_DEFER; |
| 241 | goto put_hcd; |
| 242 | } |
| 243 | |
| 244 | clk = devm_clk_get(&pdev->dev, NULL); |
| 245 | if (!IS_ERR(clk)) { |
| 246 | ret = clk_prepare_enable(clk); |
| 247 | if (ret) |
| 248 | goto disable_reg_clk; |
| 249 | } else if (PTR_ERR(clk) == -EPROBE_DEFER) { |
| 250 | ret = -EPROBE_DEFER; |
| 251 | goto disable_reg_clk; |
| 252 | } |
| 253 | |
| 254 | xhci = hcd_to_xhci(hcd); |
| 255 | priv_match = of_device_get_match_data(&pdev->dev); |
| 256 | if (priv_match) { |
| 257 | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); |
| 258 | |
| 259 | /* Just copy data for now */ |
| 260 | if (priv_match) |
| 261 | *priv = *priv_match; |
| 262 | } |
| 263 | |
| 264 | device_wakeup_enable(hcd->self.controller); |
| 265 | |
| 266 | xhci->clk = clk; |
| 267 | xhci->reg_clk = reg_clk; |
| 268 | xhci->main_hcd = hcd; |
| 269 | xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, |
| 270 | dev_name(&pdev->dev), hcd); |
| 271 | if (!xhci->shared_hcd) { |
| 272 | ret = -ENOMEM; |
| 273 | goto disable_clk; |
| 274 | } |
| 275 | |
| 276 | /* imod_interval is the interrupt moderation value in nanoseconds. */ |
| 277 | xhci->imod_interval = 40000; |
| 278 | |
| 279 | /* Iterate over all parent nodes for finding quirks */ |
| 280 | for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) { |
| 281 | |
| 282 | if (device_property_read_bool(tmpdev, "usb2-lpm-disable")) |
| 283 | xhci->quirks |= XHCI_HW_LPM_DISABLE; |
| 284 | |
| 285 | if (device_property_read_bool(tmpdev, "usb3-lpm-capable")) |
| 286 | xhci->quirks |= XHCI_LPM_SUPPORT; |
| 287 | |
| 288 | if (device_property_read_bool(tmpdev, "quirk-broken-port-ped")) |
| 289 | xhci->quirks |= XHCI_BROKEN_PORT_PED; |
| 290 | |
| 291 | device_property_read_u32(tmpdev, "imod-interval-ns", |
| 292 | &xhci->imod_interval); |
| 293 | } |
| 294 | |
| 295 | hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); |
| 296 | if (IS_ERR(hcd->usb_phy)) { |
| 297 | ret = PTR_ERR(hcd->usb_phy); |
| 298 | if (ret == -EPROBE_DEFER) |
| 299 | goto put_usb3_hcd; |
| 300 | hcd->usb_phy = NULL; |
| 301 | } else { |
| 302 | ret = usb_phy_init(hcd->usb_phy); |
| 303 | if (ret) |
| 304 | goto put_usb3_hcd; |
| 305 | hcd->skip_phy_initialization = 1; |
| 306 | } |
| 307 | |
| 308 | ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| 309 | if (ret) |
| 310 | goto disable_usb_phy; |
| 311 | |
| 312 | if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| 313 | xhci->shared_hcd->can_do_streams = 1; |
| 314 | |
| 315 | ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| 316 | if (ret) |
| 317 | goto dealloc_usb2_hcd; |
| 318 | |
| 319 | device_enable_async_suspend(&pdev->dev); |
| 320 | pm_runtime_put_noidle(&pdev->dev); |
| 321 | |
| 322 | /* |
| 323 | * Prevent runtime pm from being on as default, users should enable |
| 324 | * runtime pm using power/control in sysfs. |
| 325 | */ |
| 326 | pm_runtime_forbid(&pdev->dev); |
| 327 | |
| 328 | return 0; |
| 329 | |
| 330 | |
| 331 | dealloc_usb2_hcd: |
| 332 | usb_remove_hcd(hcd); |
| 333 | |
| 334 | disable_usb_phy: |
| 335 | usb_phy_shutdown(hcd->usb_phy); |
| 336 | |
| 337 | put_usb3_hcd: |
| 338 | usb_put_hcd(xhci->shared_hcd); |
| 339 | |
| 340 | disable_clk: |
| 341 | clk_disable_unprepare(clk); |
| 342 | |
| 343 | disable_reg_clk: |
| 344 | clk_disable_unprepare(reg_clk); |
| 345 | |
| 346 | put_hcd: |
| 347 | usb_put_hcd(hcd); |
| 348 | |
| 349 | disable_runtime: |
| 350 | pm_runtime_put_noidle(&pdev->dev); |
| 351 | pm_runtime_disable(&pdev->dev); |
| 352 | |
| 353 | return ret; |
| 354 | } |
| 355 | |
| 356 | static int xhci_plat_remove(struct platform_device *dev) |
| 357 | { |
| 358 | struct usb_hcd *hcd = platform_get_drvdata(dev); |
| 359 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 360 | struct clk *clk = xhci->clk; |
| 361 | struct clk *reg_clk = xhci->reg_clk; |
| 362 | struct usb_hcd *shared_hcd = xhci->shared_hcd; |
| 363 | |
| 364 | xhci->xhc_state |= XHCI_STATE_REMOVING; |
| 365 | |
| 366 | usb_remove_hcd(shared_hcd); |
| 367 | xhci->shared_hcd = NULL; |
| 368 | usb_phy_shutdown(hcd->usb_phy); |
| 369 | |
| 370 | usb_remove_hcd(hcd); |
| 371 | usb_put_hcd(shared_hcd); |
| 372 | |
| 373 | clk_disable_unprepare(clk); |
| 374 | clk_disable_unprepare(reg_clk); |
| 375 | usb_put_hcd(hcd); |
| 376 | |
| 377 | pm_runtime_set_suspended(&dev->dev); |
| 378 | pm_runtime_disable(&dev->dev); |
| 379 | |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | static int __maybe_unused xhci_plat_suspend(struct device *dev) |
| 384 | { |
| 385 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 386 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 387 | |
| 388 | /* |
| 389 | * xhci_suspend() needs `do_wakeup` to know whether host is allowed |
| 390 | * to do wakeup during suspend. Since xhci_plat_suspend is currently |
| 391 | * only designed for system suspend, device_may_wakeup() is enough |
| 392 | * to dertermine whether host is allowed to do wakeup. Need to |
| 393 | * reconsider this when xhci_plat_suspend enlarges its scope, e.g., |
| 394 | * also applies to runtime suspend. |
| 395 | */ |
| 396 | return xhci_suspend(xhci, device_may_wakeup(dev)); |
| 397 | } |
| 398 | |
| 399 | static int __maybe_unused xhci_plat_resume(struct device *dev) |
| 400 | { |
| 401 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 402 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 403 | int ret; |
| 404 | |
| 405 | ret = xhci_priv_resume_quirk(hcd); |
| 406 | if (ret) |
| 407 | return ret; |
| 408 | |
| 409 | return xhci_resume(xhci, 0); |
| 410 | } |
| 411 | |
| 412 | static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) |
| 413 | { |
| 414 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 415 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 416 | |
| 417 | return xhci_suspend(xhci, true); |
| 418 | } |
| 419 | |
| 420 | static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) |
| 421 | { |
| 422 | struct usb_hcd *hcd = dev_get_drvdata(dev); |
| 423 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 424 | |
| 425 | return xhci_resume(xhci, 0); |
| 426 | } |
| 427 | |
| 428 | static const struct dev_pm_ops xhci_plat_pm_ops = { |
| 429 | SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) |
| 430 | |
| 431 | SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, |
| 432 | xhci_plat_runtime_resume, |
| 433 | NULL) |
| 434 | }; |
| 435 | |
| 436 | static const struct acpi_device_id usb_xhci_acpi_match[] = { |
| 437 | /* XHCI-compliant USB Controller */ |
| 438 | { "PNP0D10", }, |
| 439 | { } |
| 440 | }; |
| 441 | MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); |
| 442 | |
| 443 | static struct platform_driver usb_xhci_driver = { |
| 444 | .probe = xhci_plat_probe, |
| 445 | .remove = xhci_plat_remove, |
| 446 | .driver = { |
| 447 | .name = "xhci-hcd", |
| 448 | .pm = &xhci_plat_pm_ops, |
| 449 | .of_match_table = of_match_ptr(usb_xhci_of_match), |
| 450 | .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), |
| 451 | }, |
| 452 | }; |
| 453 | MODULE_ALIAS("platform:xhci-hcd"); |
| 454 | |
| 455 | static int __init xhci_plat_init(void) |
| 456 | { |
| 457 | xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); |
| 458 | return platform_driver_register(&usb_xhci_driver); |
| 459 | } |
| 460 | module_init(xhci_plat_init); |
| 461 | |
| 462 | static void __exit xhci_plat_exit(void) |
| 463 | { |
| 464 | platform_driver_unregister(&usb_xhci_driver); |
| 465 | } |
| 466 | module_exit(xhci_plat_exit); |
| 467 | |
| 468 | MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); |
| 469 | MODULE_LICENSE("GPL"); |