| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  *  Copyright (C) 1994-1998	    Linus Torvalds & authors (see below) | 
 | 3 |  *  Copyright (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz | 
 | 4 |  */ | 
 | 5 |  | 
 | 6 | /* | 
 | 7 |  *  Mostly written by Mark Lord  <mlord@pobox.com> | 
 | 8 |  *                and Gadi Oxman <gadio@netvision.net.il> | 
 | 9 |  *                and Andre Hedrick <andre@linux-ide.org> | 
 | 10 |  * | 
 | 11 |  *  See linux/MAINTAINERS for address of current maintainer. | 
 | 12 |  * | 
 | 13 |  * This is the multiple IDE interface driver, as evolved from hd.c. | 
 | 14 |  * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs | 
 | 15 |  *   (usually 14 & 15). | 
 | 16 |  * There can be up to two drives per interface, as per the ATA-2 spec. | 
 | 17 |  * | 
 | 18 |  * ... | 
 | 19 |  * | 
 | 20 |  *  From hd.c: | 
 | 21 |  *  | | 
 | 22 |  *  | It traverses the request-list, using interrupts to jump between functions. | 
 | 23 |  *  | As nearly all functions can be called within interrupts, we may not sleep. | 
 | 24 |  *  | Special care is recommended.  Have Fun! | 
 | 25 |  *  | | 
 | 26 |  *  | modified by Drew Eckhardt to check nr of hd's from the CMOS. | 
 | 27 |  *  | | 
 | 28 |  *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug | 
 | 29 |  *  | in the early extended-partition checks and added DM partitions. | 
 | 30 |  *  | | 
 | 31 |  *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI). | 
 | 32 |  *  | | 
 | 33 |  *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", | 
 | 34 |  *  | and general streamlining by Mark Lord (mlord@pobox.com). | 
 | 35 |  * | 
 | 36 |  *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by: | 
 | 37 |  * | 
 | 38 |  *	Mark Lord	(mlord@pobox.com)		(IDE Perf.Pkg) | 
 | 39 |  *	Delman Lee	(delman@ieee.org)		("Mr. atdisk2") | 
 | 40 |  *	Scott Snyder	(snyder@fnald0.fnal.gov)	(ATAPI IDE cd-rom) | 
 | 41 |  * | 
 | 42 |  *  This was a rewrite of just about everything from hd.c, though some original | 
 | 43 |  *  code is still sprinkled about.  Think of it as a major evolution, with | 
 | 44 |  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au | 
 | 45 |  */ | 
 | 46 |  | 
 | 47 | #include <linux/module.h> | 
 | 48 | #include <linux/types.h> | 
 | 49 | #include <linux/string.h> | 
 | 50 | #include <linux/kernel.h> | 
 | 51 | #include <linux/interrupt.h> | 
 | 52 | #include <linux/major.h> | 
 | 53 | #include <linux/errno.h> | 
 | 54 | #include <linux/genhd.h> | 
 | 55 | #include <linux/init.h> | 
 | 56 | #include <linux/pci.h> | 
 | 57 | #include <linux/ide.h> | 
 | 58 | #include <linux/hdreg.h> | 
 | 59 | #include <linux/completion.h> | 
 | 60 | #include <linux/device.h> | 
 | 61 |  | 
 | 62 | struct class *ide_port_class; | 
 | 63 |  | 
 | 64 | /** | 
 | 65 |  * ide_device_get	-	get an additional reference to a ide_drive_t | 
 | 66 |  * @drive:	device to get a reference to | 
 | 67 |  * | 
 | 68 |  * Gets a reference to the ide_drive_t and increments the use count of the | 
 | 69 |  * underlying LLDD module. | 
 | 70 |  */ | 
 | 71 | int ide_device_get(ide_drive_t *drive) | 
 | 72 | { | 
 | 73 | 	struct device *host_dev; | 
 | 74 | 	struct module *module; | 
 | 75 |  | 
 | 76 | 	if (!get_device(&drive->gendev)) | 
 | 77 | 		return -ENXIO; | 
 | 78 |  | 
 | 79 | 	host_dev = drive->hwif->host->dev[0]; | 
 | 80 | 	module = host_dev ? host_dev->driver->owner : NULL; | 
 | 81 |  | 
 | 82 | 	if (module && !try_module_get(module)) { | 
 | 83 | 		put_device(&drive->gendev); | 
 | 84 | 		return -ENXIO; | 
 | 85 | 	} | 
 | 86 |  | 
 | 87 | 	return 0; | 
 | 88 | } | 
 | 89 | EXPORT_SYMBOL_GPL(ide_device_get); | 
 | 90 |  | 
 | 91 | /** | 
 | 92 |  * ide_device_put	-	release a reference to a ide_drive_t | 
 | 93 |  * @drive:	device to release a reference on | 
 | 94 |  * | 
 | 95 |  * Release a reference to the ide_drive_t and decrements the use count of | 
 | 96 |  * the underlying LLDD module. | 
 | 97 |  */ | 
 | 98 | void ide_device_put(ide_drive_t *drive) | 
 | 99 | { | 
 | 100 | #ifdef CONFIG_MODULE_UNLOAD | 
 | 101 | 	struct device *host_dev = drive->hwif->host->dev[0]; | 
 | 102 | 	struct module *module = host_dev ? host_dev->driver->owner : NULL; | 
 | 103 |  | 
 | 104 | 	module_put(module); | 
 | 105 | #endif | 
 | 106 | 	put_device(&drive->gendev); | 
 | 107 | } | 
 | 108 | EXPORT_SYMBOL_GPL(ide_device_put); | 
 | 109 |  | 
 | 110 | static int ide_bus_match(struct device *dev, struct device_driver *drv) | 
 | 111 | { | 
 | 112 | 	return 1; | 
 | 113 | } | 
 | 114 |  | 
 | 115 | static int ide_uevent(struct device *dev, struct kobj_uevent_env *env) | 
 | 116 | { | 
 | 117 | 	ide_drive_t *drive = to_ide_device(dev); | 
 | 118 |  | 
 | 119 | 	add_uevent_var(env, "MEDIA=%s", ide_media_string(drive)); | 
 | 120 | 	add_uevent_var(env, "DRIVENAME=%s", drive->name); | 
 | 121 | 	add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive)); | 
 | 122 | 	return 0; | 
 | 123 | } | 
 | 124 |  | 
 | 125 | static int generic_ide_probe(struct device *dev) | 
 | 126 | { | 
 | 127 | 	ide_drive_t *drive = to_ide_device(dev); | 
 | 128 | 	struct ide_driver *drv = to_ide_driver(dev->driver); | 
 | 129 |  | 
 | 130 | 	return drv->probe ? drv->probe(drive) : -ENODEV; | 
 | 131 | } | 
 | 132 |  | 
 | 133 | static int generic_ide_remove(struct device *dev) | 
 | 134 | { | 
 | 135 | 	ide_drive_t *drive = to_ide_device(dev); | 
 | 136 | 	struct ide_driver *drv = to_ide_driver(dev->driver); | 
 | 137 |  | 
 | 138 | 	if (drv->remove) | 
 | 139 | 		drv->remove(drive); | 
 | 140 |  | 
 | 141 | 	return 0; | 
 | 142 | } | 
 | 143 |  | 
 | 144 | static void generic_ide_shutdown(struct device *dev) | 
 | 145 | { | 
 | 146 | 	ide_drive_t *drive = to_ide_device(dev); | 
 | 147 | 	struct ide_driver *drv = to_ide_driver(dev->driver); | 
 | 148 |  | 
 | 149 | 	if (dev->driver && drv->shutdown) | 
 | 150 | 		drv->shutdown(drive); | 
 | 151 | } | 
 | 152 |  | 
 | 153 | struct bus_type ide_bus_type = { | 
 | 154 | 	.name		= "ide", | 
 | 155 | 	.match		= ide_bus_match, | 
 | 156 | 	.uevent		= ide_uevent, | 
 | 157 | 	.probe		= generic_ide_probe, | 
 | 158 | 	.remove		= generic_ide_remove, | 
 | 159 | 	.shutdown	= generic_ide_shutdown, | 
 | 160 | 	.dev_groups	= ide_dev_groups, | 
 | 161 | 	.suspend	= generic_ide_suspend, | 
 | 162 | 	.resume		= generic_ide_resume, | 
 | 163 | }; | 
 | 164 |  | 
 | 165 | EXPORT_SYMBOL_GPL(ide_bus_type); | 
 | 166 |  | 
 | 167 | int ide_vlb_clk; | 
 | 168 | EXPORT_SYMBOL_GPL(ide_vlb_clk); | 
 | 169 |  | 
 | 170 | module_param_named(vlb_clock, ide_vlb_clk, int, 0); | 
 | 171 | MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); | 
 | 172 |  | 
 | 173 | int ide_pci_clk; | 
 | 174 | EXPORT_SYMBOL_GPL(ide_pci_clk); | 
 | 175 |  | 
 | 176 | module_param_named(pci_clock, ide_pci_clk, int, 0); | 
 | 177 | MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); | 
 | 178 |  | 
 | 179 | static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp) | 
 | 180 | { | 
 | 181 | 	unsigned int a, b, i, j = 1; | 
 | 182 | 	unsigned int *dev_param_mask = (unsigned int *)kp->arg; | 
 | 183 |  | 
 | 184 | 	/* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ | 
 | 185 | 	if (sscanf(s, "%u.%u:%u", &a, &b, &j) != 3 && | 
 | 186 | 	    sscanf(s, "%u.%u", &a, &b) != 2) | 
 | 187 | 		return -EINVAL; | 
 | 188 |  | 
 | 189 | 	i = a * MAX_DRIVES + b; | 
 | 190 |  | 
 | 191 | 	if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) | 
 | 192 | 		return -EINVAL; | 
 | 193 |  | 
 | 194 | 	if (j) | 
 | 195 | 		*dev_param_mask |= (1 << i); | 
 | 196 | 	else | 
 | 197 | 		*dev_param_mask &= ~(1 << i); | 
 | 198 |  | 
 | 199 | 	return 0; | 
 | 200 | } | 
 | 201 |  | 
 | 202 | static const struct kernel_param_ops param_ops_ide_dev_mask = { | 
 | 203 | 	.set = ide_set_dev_param_mask | 
 | 204 | }; | 
 | 205 |  | 
 | 206 | #define param_check_ide_dev_mask(name, p) param_check_uint(name, p) | 
 | 207 |  | 
 | 208 | static unsigned int ide_nodma; | 
 | 209 |  | 
 | 210 | module_param_named(nodma, ide_nodma, ide_dev_mask, 0); | 
 | 211 | MODULE_PARM_DESC(nodma, "disallow DMA for a device"); | 
 | 212 |  | 
 | 213 | static unsigned int ide_noflush; | 
 | 214 |  | 
 | 215 | module_param_named(noflush, ide_noflush, ide_dev_mask, 0); | 
 | 216 | MODULE_PARM_DESC(noflush, "disable flush requests for a device"); | 
 | 217 |  | 
 | 218 | static unsigned int ide_nohpa; | 
 | 219 |  | 
 | 220 | module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0); | 
 | 221 | MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); | 
 | 222 |  | 
 | 223 | static unsigned int ide_noprobe; | 
 | 224 |  | 
 | 225 | module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0); | 
 | 226 | MODULE_PARM_DESC(noprobe, "skip probing for a device"); | 
 | 227 |  | 
 | 228 | static unsigned int ide_nowerr; | 
 | 229 |  | 
 | 230 | module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0); | 
 | 231 | MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); | 
 | 232 |  | 
 | 233 | static unsigned int ide_cdroms; | 
 | 234 |  | 
 | 235 | module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0); | 
 | 236 | MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); | 
 | 237 |  | 
 | 238 | struct chs_geom { | 
 | 239 | 	unsigned int	cyl; | 
 | 240 | 	u8		head; | 
 | 241 | 	u8		sect; | 
 | 242 | }; | 
 | 243 |  | 
 | 244 | static unsigned int ide_disks; | 
 | 245 | static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; | 
 | 246 |  | 
 | 247 | static int ide_set_disk_chs(const char *str, const struct kernel_param *kp) | 
 | 248 | { | 
 | 249 | 	unsigned int a, b, c = 0, h = 0, s = 0, i, j = 1; | 
 | 250 |  | 
 | 251 | 	/* controller . device (0 or 1) : Cylinders , Heads , Sectors */ | 
 | 252 | 	/* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ | 
 | 253 | 	if (sscanf(str, "%u.%u:%u,%u,%u", &a, &b, &c, &h, &s) != 5 && | 
 | 254 | 	    sscanf(str, "%u.%u:%u", &a, &b, &j) != 3) | 
 | 255 | 		return -EINVAL; | 
 | 256 |  | 
 | 257 | 	i = a * MAX_DRIVES + b; | 
 | 258 |  | 
 | 259 | 	if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) | 
 | 260 | 		return -EINVAL; | 
 | 261 |  | 
 | 262 | 	if (c > INT_MAX || h > 255 || s > 255) | 
 | 263 | 		return -EINVAL; | 
 | 264 |  | 
 | 265 | 	if (j) | 
 | 266 | 		ide_disks |= (1 << i); | 
 | 267 | 	else | 
 | 268 | 		ide_disks &= ~(1 << i); | 
 | 269 |  | 
 | 270 | 	ide_disks_chs[i].cyl  = c; | 
 | 271 | 	ide_disks_chs[i].head = h; | 
 | 272 | 	ide_disks_chs[i].sect = s; | 
 | 273 |  | 
 | 274 | 	return 0; | 
 | 275 | } | 
 | 276 |  | 
 | 277 | module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); | 
 | 278 | MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); | 
 | 279 |  | 
 | 280 | static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) | 
 | 281 | { | 
 | 282 | 	int i = drive->hwif->index * MAX_DRIVES + unit; | 
 | 283 |  | 
 | 284 | 	if (ide_nodma & (1 << i)) { | 
 | 285 | 		printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); | 
 | 286 | 		drive->dev_flags |= IDE_DFLAG_NODMA; | 
 | 287 | 	} | 
 | 288 | 	if (ide_noflush & (1 << i)) { | 
 | 289 | 		printk(KERN_INFO "ide: disabling flush requests for %s\n", | 
 | 290 | 				 drive->name); | 
 | 291 | 		drive->dev_flags |= IDE_DFLAG_NOFLUSH; | 
 | 292 | 	} | 
 | 293 | 	if (ide_nohpa & (1 << i)) { | 
 | 294 | 		printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", | 
 | 295 | 				 drive->name); | 
 | 296 | 		drive->dev_flags |= IDE_DFLAG_NOHPA; | 
 | 297 | 	} | 
 | 298 | 	if (ide_noprobe & (1 << i)) { | 
 | 299 | 		printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); | 
 | 300 | 		drive->dev_flags |= IDE_DFLAG_NOPROBE; | 
 | 301 | 	} | 
 | 302 | 	if (ide_nowerr & (1 << i)) { | 
 | 303 | 		printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n", | 
 | 304 | 				 drive->name); | 
 | 305 | 		drive->bad_wstat = BAD_R_STAT; | 
 | 306 | 	} | 
 | 307 | 	if (ide_cdroms & (1 << i)) { | 
 | 308 | 		printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); | 
 | 309 | 		drive->dev_flags |= IDE_DFLAG_PRESENT; | 
 | 310 | 		drive->media = ide_cdrom; | 
 | 311 | 		/* an ATAPI device ignores DRDY */ | 
 | 312 | 		drive->ready_stat = 0; | 
 | 313 | 	} | 
 | 314 | 	if (ide_disks & (1 << i)) { | 
 | 315 | 		drive->cyl  = drive->bios_cyl  = ide_disks_chs[i].cyl; | 
 | 316 | 		drive->head = drive->bios_head = ide_disks_chs[i].head; | 
 | 317 | 		drive->sect = drive->bios_sect = ide_disks_chs[i].sect; | 
 | 318 |  | 
 | 319 | 		printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", | 
 | 320 | 				 drive->name, | 
 | 321 | 				 drive->cyl, drive->head, drive->sect); | 
 | 322 |  | 
 | 323 | 		drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT; | 
 | 324 | 		drive->media = ide_disk; | 
 | 325 | 		drive->ready_stat = ATA_DRDY; | 
 | 326 | 	} | 
 | 327 | } | 
 | 328 |  | 
 | 329 | static unsigned int ide_ignore_cable; | 
 | 330 |  | 
 | 331 | static int ide_set_ignore_cable(const char *s, const struct kernel_param *kp) | 
 | 332 | { | 
 | 333 | 	int i, j = 1; | 
 | 334 |  | 
 | 335 | 	/* controller (ignore) */ | 
 | 336 | 	/* controller : 1 (ignore) | 0 (use) */ | 
 | 337 | 	if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) | 
 | 338 | 		return -EINVAL; | 
 | 339 |  | 
 | 340 | 	if (i >= MAX_HWIFS || j < 0 || j > 1) | 
 | 341 | 		return -EINVAL; | 
 | 342 |  | 
 | 343 | 	if (j) | 
 | 344 | 		ide_ignore_cable |= (1 << i); | 
 | 345 | 	else | 
 | 346 | 		ide_ignore_cable &= ~(1 << i); | 
 | 347 |  | 
 | 348 | 	return 0; | 
 | 349 | } | 
 | 350 |  | 
 | 351 | module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); | 
 | 352 | MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); | 
 | 353 |  | 
 | 354 | void ide_port_apply_params(ide_hwif_t *hwif) | 
 | 355 | { | 
 | 356 | 	ide_drive_t *drive; | 
 | 357 | 	int i; | 
 | 358 |  | 
 | 359 | 	if (ide_ignore_cable & (1 << hwif->index)) { | 
 | 360 | 		printk(KERN_INFO "ide: ignoring cable detection for %s\n", | 
 | 361 | 				 hwif->name); | 
 | 362 | 		hwif->cbl = ATA_CBL_PATA40_SHORT; | 
 | 363 | 	} | 
 | 364 |  | 
 | 365 | 	ide_port_for_each_dev(i, drive, hwif) | 
 | 366 | 		ide_dev_apply_params(drive, i); | 
 | 367 | } | 
 | 368 |  | 
 | 369 | /* | 
 | 370 |  * This is gets invoked once during initialization, to set *everything* up | 
 | 371 |  */ | 
 | 372 | static int __init ide_init(void) | 
 | 373 | { | 
 | 374 | 	int ret; | 
 | 375 |  | 
 | 376 | 	printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); | 
 | 377 |  | 
 | 378 | 	ret = bus_register(&ide_bus_type); | 
 | 379 | 	if (ret < 0) { | 
 | 380 | 		printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); | 
 | 381 | 		return ret; | 
 | 382 | 	} | 
 | 383 |  | 
 | 384 | 	ide_port_class = class_create(THIS_MODULE, "ide_port"); | 
 | 385 | 	if (IS_ERR(ide_port_class)) { | 
 | 386 | 		ret = PTR_ERR(ide_port_class); | 
 | 387 | 		goto out_port_class; | 
 | 388 | 	} | 
 | 389 |  | 
 | 390 | 	ide_acpi_init(); | 
 | 391 |  | 
 | 392 | 	proc_ide_create(); | 
 | 393 |  | 
 | 394 | 	return 0; | 
 | 395 |  | 
 | 396 | out_port_class: | 
 | 397 | 	bus_unregister(&ide_bus_type); | 
 | 398 |  | 
 | 399 | 	return ret; | 
 | 400 | } | 
 | 401 |  | 
 | 402 | static void __exit ide_exit(void) | 
 | 403 | { | 
 | 404 | 	proc_ide_destroy(); | 
 | 405 |  | 
 | 406 | 	class_destroy(ide_port_class); | 
 | 407 |  | 
 | 408 | 	bus_unregister(&ide_bus_type); | 
 | 409 | } | 
 | 410 |  | 
 | 411 | module_init(ide_init); | 
 | 412 | module_exit(ide_exit); | 
 | 413 |  | 
 | 414 | MODULE_LICENSE("GPL"); |