| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201 | 
 | 3 |  * Copyright (C) 2011  Jean Delvare <jdelvare@suse.de> | 
 | 4 |  * | 
 | 5 |  * This program is free software; you can redistribute it and/or modify | 
 | 6 |  * it under the terms of the GNU General Public License as published by | 
 | 7 |  * the Free Software Foundation; either version 2 of the License, or | 
 | 8 |  * (at your option) any later version. | 
 | 9 |  * | 
 | 10 |  * This program is distributed in the hope that it will be useful, | 
 | 11 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 12 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 13 |  * GNU General Public License for more details. | 
 | 14 |  * | 
 | 15 |  * You should have received a copy of the GNU General Public License | 
 | 16 |  * along with this program; if not, write to the Free Software | 
 | 17 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | 18 |  */ | 
 | 19 |  | 
 | 20 | #include <linux/module.h> | 
 | 21 | #include <linux/init.h> | 
 | 22 | #include <linux/slab.h> | 
 | 23 | #include <linux/jiffies.h> | 
 | 24 | #include <linux/i2c.h> | 
 | 25 | #include <linux/hwmon.h> | 
 | 26 | #include <linux/hwmon-sysfs.h> | 
 | 27 | #include <linux/err.h> | 
 | 28 | #include <linux/mutex.h> | 
 | 29 |  | 
 | 30 | /* | 
 | 31 |  * Addresses to scan | 
 | 32 |  */ | 
 | 33 |  | 
 | 34 | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; | 
 | 35 |  | 
 | 36 | /* | 
 | 37 |  * The EMC6W201 registers | 
 | 38 |  */ | 
 | 39 |  | 
 | 40 | #define EMC6W201_REG_IN(nr)		(0x20 + (nr)) | 
 | 41 | #define EMC6W201_REG_TEMP(nr)		(0x26 + (nr)) | 
 | 42 | #define EMC6W201_REG_FAN(nr)		(0x2C + (nr) * 2) | 
 | 43 | #define EMC6W201_REG_COMPANY		0x3E | 
 | 44 | #define EMC6W201_REG_VERSTEP		0x3F | 
 | 45 | #define EMC6W201_REG_CONFIG		0x40 | 
 | 46 | #define EMC6W201_REG_IN_LOW(nr)		(0x4A + (nr) * 2) | 
 | 47 | #define EMC6W201_REG_IN_HIGH(nr)	(0x4B + (nr) * 2) | 
 | 48 | #define EMC6W201_REG_TEMP_LOW(nr)	(0x56 + (nr) * 2) | 
 | 49 | #define EMC6W201_REG_TEMP_HIGH(nr)	(0x57 + (nr) * 2) | 
 | 50 | #define EMC6W201_REG_FAN_MIN(nr)	(0x62 + (nr) * 2) | 
 | 51 |  | 
 | 52 | enum subfeature { input, min, max }; | 
 | 53 |  | 
 | 54 | /* | 
 | 55 |  * Per-device data | 
 | 56 |  */ | 
 | 57 |  | 
 | 58 | struct emc6w201_data { | 
 | 59 | 	struct i2c_client *client; | 
 | 60 | 	struct mutex update_lock; | 
 | 61 | 	char valid; /* zero until following fields are valid */ | 
 | 62 | 	unsigned long last_updated; /* in jiffies */ | 
 | 63 |  | 
 | 64 | 	/* registers values */ | 
 | 65 | 	u8 in[3][6]; | 
 | 66 | 	s8 temp[3][6]; | 
 | 67 | 	u16 fan[2][5]; | 
 | 68 | }; | 
 | 69 |  | 
 | 70 | /* | 
 | 71 |  * Combine LSB and MSB registers in a single value | 
 | 72 |  * Locking: must be called with data->update_lock held | 
 | 73 |  */ | 
 | 74 | static u16 emc6w201_read16(struct i2c_client *client, u8 reg) | 
 | 75 | { | 
 | 76 | 	int lsb, msb; | 
 | 77 |  | 
 | 78 | 	lsb = i2c_smbus_read_byte_data(client, reg); | 
 | 79 | 	msb = i2c_smbus_read_byte_data(client, reg + 1); | 
 | 80 | 	if (unlikely(lsb < 0 || msb < 0)) { | 
 | 81 | 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", | 
 | 82 | 			16, "read", reg); | 
 | 83 | 		return 0xFFFF;	/* Arbitrary value */ | 
 | 84 | 	} | 
 | 85 |  | 
 | 86 | 	return (msb << 8) | lsb; | 
 | 87 | } | 
 | 88 |  | 
 | 89 | /* | 
 | 90 |  * Write 16-bit value to LSB and MSB registers | 
 | 91 |  * Locking: must be called with data->update_lock held | 
 | 92 |  */ | 
 | 93 | static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) | 
 | 94 | { | 
 | 95 | 	int err; | 
 | 96 |  | 
 | 97 | 	err = i2c_smbus_write_byte_data(client, reg, val & 0xff); | 
 | 98 | 	if (likely(!err)) | 
 | 99 | 		err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); | 
 | 100 | 	if (unlikely(err < 0)) | 
 | 101 | 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", | 
 | 102 | 			16, "write", reg); | 
 | 103 |  | 
 | 104 | 	return err; | 
 | 105 | } | 
 | 106 |  | 
 | 107 | /* Read 8-bit value from register */ | 
 | 108 | static u8 emc6w201_read8(struct i2c_client *client, u8 reg) | 
 | 109 | { | 
 | 110 | 	int val; | 
 | 111 |  | 
 | 112 | 	val = i2c_smbus_read_byte_data(client, reg); | 
 | 113 | 	if (unlikely(val < 0)) { | 
 | 114 | 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", | 
 | 115 | 			8, "read", reg); | 
 | 116 | 		return 0x00;	/* Arbitrary value */ | 
 | 117 | 	} | 
 | 118 |  | 
 | 119 | 	return val; | 
 | 120 | } | 
 | 121 |  | 
 | 122 | /* Write 8-bit value to register */ | 
 | 123 | static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) | 
 | 124 | { | 
 | 125 | 	int err; | 
 | 126 |  | 
 | 127 | 	err = i2c_smbus_write_byte_data(client, reg, val); | 
 | 128 | 	if (unlikely(err < 0)) | 
 | 129 | 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", | 
 | 130 | 			8, "write", reg); | 
 | 131 |  | 
 | 132 | 	return err; | 
 | 133 | } | 
 | 134 |  | 
 | 135 | static struct emc6w201_data *emc6w201_update_device(struct device *dev) | 
 | 136 | { | 
 | 137 | 	struct emc6w201_data *data = dev_get_drvdata(dev); | 
 | 138 | 	struct i2c_client *client = data->client; | 
 | 139 | 	int nr; | 
 | 140 |  | 
 | 141 | 	mutex_lock(&data->update_lock); | 
 | 142 |  | 
 | 143 | 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { | 
 | 144 | 		for (nr = 0; nr < 6; nr++) { | 
 | 145 | 			data->in[input][nr] = | 
 | 146 | 				emc6w201_read8(client, | 
 | 147 | 						EMC6W201_REG_IN(nr)); | 
 | 148 | 			data->in[min][nr] = | 
 | 149 | 				emc6w201_read8(client, | 
 | 150 | 						EMC6W201_REG_IN_LOW(nr)); | 
 | 151 | 			data->in[max][nr] = | 
 | 152 | 				emc6w201_read8(client, | 
 | 153 | 						EMC6W201_REG_IN_HIGH(nr)); | 
 | 154 | 		} | 
 | 155 |  | 
 | 156 | 		for (nr = 0; nr < 6; nr++) { | 
 | 157 | 			data->temp[input][nr] = | 
 | 158 | 				emc6w201_read8(client, | 
 | 159 | 						EMC6W201_REG_TEMP(nr)); | 
 | 160 | 			data->temp[min][nr] = | 
 | 161 | 				emc6w201_read8(client, | 
 | 162 | 						EMC6W201_REG_TEMP_LOW(nr)); | 
 | 163 | 			data->temp[max][nr] = | 
 | 164 | 				emc6w201_read8(client, | 
 | 165 | 						EMC6W201_REG_TEMP_HIGH(nr)); | 
 | 166 | 		} | 
 | 167 |  | 
 | 168 | 		for (nr = 0; nr < 5; nr++) { | 
 | 169 | 			data->fan[input][nr] = | 
 | 170 | 				emc6w201_read16(client, | 
 | 171 | 						EMC6W201_REG_FAN(nr)); | 
 | 172 | 			data->fan[min][nr] = | 
 | 173 | 				emc6w201_read16(client, | 
 | 174 | 						EMC6W201_REG_FAN_MIN(nr)); | 
 | 175 | 		} | 
 | 176 |  | 
 | 177 | 		data->last_updated = jiffies; | 
 | 178 | 		data->valid = 1; | 
 | 179 | 	} | 
 | 180 |  | 
 | 181 | 	mutex_unlock(&data->update_lock); | 
 | 182 |  | 
 | 183 | 	return data; | 
 | 184 | } | 
 | 185 |  | 
 | 186 | /* | 
 | 187 |  * Sysfs callback functions | 
 | 188 |  */ | 
 | 189 |  | 
 | 190 | static const s16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 }; | 
 | 191 |  | 
 | 192 | static ssize_t show_in(struct device *dev, struct device_attribute *devattr, | 
 | 193 | 	char *buf) | 
 | 194 | { | 
 | 195 | 	struct emc6w201_data *data = emc6w201_update_device(dev); | 
 | 196 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 197 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 198 |  | 
 | 199 | 	return sprintf(buf, "%u\n", | 
 | 200 | 		       (unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0); | 
 | 201 | } | 
 | 202 |  | 
 | 203 | static ssize_t set_in(struct device *dev, struct device_attribute *devattr, | 
 | 204 | 		      const char *buf, size_t count) | 
 | 205 | { | 
 | 206 | 	struct emc6w201_data *data = dev_get_drvdata(dev); | 
 | 207 | 	struct i2c_client *client = data->client; | 
 | 208 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 209 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 210 | 	int err; | 
 | 211 | 	long val; | 
 | 212 | 	u8 reg; | 
 | 213 |  | 
 | 214 | 	err = kstrtol(buf, 10, &val); | 
 | 215 | 	if (err < 0) | 
 | 216 | 		return err; | 
 | 217 |  | 
 | 218 | 	val = clamp_val(val, 0, 255 * nominal_mv[nr] / 192); | 
 | 219 | 	val = DIV_ROUND_CLOSEST(val * 192, nominal_mv[nr]); | 
 | 220 | 	reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr) | 
 | 221 | 			  : EMC6W201_REG_IN_HIGH(nr); | 
 | 222 |  | 
 | 223 | 	mutex_lock(&data->update_lock); | 
 | 224 | 	data->in[sf][nr] = val; | 
 | 225 | 	err = emc6w201_write8(client, reg, data->in[sf][nr]); | 
 | 226 | 	mutex_unlock(&data->update_lock); | 
 | 227 |  | 
 | 228 | 	return err < 0 ? err : count; | 
 | 229 | } | 
 | 230 |  | 
 | 231 | static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, | 
 | 232 | 	char *buf) | 
 | 233 | { | 
 | 234 | 	struct emc6w201_data *data = emc6w201_update_device(dev); | 
 | 235 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 236 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 237 |  | 
 | 238 | 	return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000); | 
 | 239 | } | 
 | 240 |  | 
 | 241 | static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, | 
 | 242 | 			const char *buf, size_t count) | 
 | 243 | { | 
 | 244 | 	struct emc6w201_data *data = dev_get_drvdata(dev); | 
 | 245 | 	struct i2c_client *client = data->client; | 
 | 246 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 247 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 248 | 	int err; | 
 | 249 | 	long val; | 
 | 250 | 	u8 reg; | 
 | 251 |  | 
 | 252 | 	err = kstrtol(buf, 10, &val); | 
 | 253 | 	if (err < 0) | 
 | 254 | 		return err; | 
 | 255 |  | 
 | 256 | 	val = clamp_val(val, -127000, 127000); | 
 | 257 | 	val = DIV_ROUND_CLOSEST(val, 1000); | 
 | 258 | 	reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr) | 
 | 259 | 			  : EMC6W201_REG_TEMP_HIGH(nr); | 
 | 260 |  | 
 | 261 | 	mutex_lock(&data->update_lock); | 
 | 262 | 	data->temp[sf][nr] = val; | 
 | 263 | 	err = emc6w201_write8(client, reg, data->temp[sf][nr]); | 
 | 264 | 	mutex_unlock(&data->update_lock); | 
 | 265 |  | 
 | 266 | 	return err < 0 ? err : count; | 
 | 267 | } | 
 | 268 |  | 
 | 269 | static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, | 
 | 270 | 	char *buf) | 
 | 271 | { | 
 | 272 | 	struct emc6w201_data *data = emc6w201_update_device(dev); | 
 | 273 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 274 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 275 | 	unsigned rpm; | 
 | 276 |  | 
 | 277 | 	if (data->fan[sf][nr] == 0 || data->fan[sf][nr] == 0xFFFF) | 
 | 278 | 		rpm = 0; | 
 | 279 | 	else | 
 | 280 | 		rpm = 5400000U / data->fan[sf][nr]; | 
 | 281 |  | 
 | 282 | 	return sprintf(buf, "%u\n", rpm); | 
 | 283 | } | 
 | 284 |  | 
 | 285 | static ssize_t set_fan(struct device *dev, struct device_attribute *devattr, | 
 | 286 | 		       const char *buf, size_t count) | 
 | 287 | { | 
 | 288 | 	struct emc6w201_data *data = dev_get_drvdata(dev); | 
 | 289 | 	struct i2c_client *client = data->client; | 
 | 290 | 	int sf = to_sensor_dev_attr_2(devattr)->index; | 
 | 291 | 	int nr = to_sensor_dev_attr_2(devattr)->nr; | 
 | 292 | 	int err; | 
 | 293 | 	unsigned long val; | 
 | 294 |  | 
 | 295 | 	err = kstrtoul(buf, 10, &val); | 
 | 296 | 	if (err < 0) | 
 | 297 | 		return err; | 
 | 298 |  | 
 | 299 | 	if (val == 0) { | 
 | 300 | 		val = 0xFFFF; | 
 | 301 | 	} else { | 
 | 302 | 		val = DIV_ROUND_CLOSEST(5400000U, val); | 
 | 303 | 		val = clamp_val(val, 0, 0xFFFE); | 
 | 304 | 	} | 
 | 305 |  | 
 | 306 | 	mutex_lock(&data->update_lock); | 
 | 307 | 	data->fan[sf][nr] = val; | 
 | 308 | 	err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr), | 
 | 309 | 			       data->fan[sf][nr]); | 
 | 310 | 	mutex_unlock(&data->update_lock); | 
 | 311 |  | 
 | 312 | 	return err < 0 ? err : count; | 
 | 313 | } | 
 | 314 |  | 
 | 315 | static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, input); | 
 | 316 | static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 317 | 			    0, min); | 
 | 318 | static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 319 | 			    0, max); | 
 | 320 | static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, input); | 
 | 321 | static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 322 | 			    1, min); | 
 | 323 | static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 324 | 			    1, max); | 
 | 325 | static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, input); | 
 | 326 | static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 327 | 			    2, min); | 
 | 328 | static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 329 | 			    2, max); | 
 | 330 | static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, input); | 
 | 331 | static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 332 | 			    3, min); | 
 | 333 | static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 334 | 			    3, max); | 
 | 335 | static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, input); | 
 | 336 | static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 337 | 			    4, min); | 
 | 338 | static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 339 | 			    4, max); | 
 | 340 | static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, input); | 
 | 341 | static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 342 | 			    5, min); | 
 | 343 | static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in, | 
 | 344 | 			    5, max); | 
 | 345 |  | 
 | 346 | static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, input); | 
 | 347 | static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 348 | 			    0, min); | 
 | 349 | static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 350 | 			    0, max); | 
 | 351 | static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, input); | 
 | 352 | static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 353 | 			    1, min); | 
 | 354 | static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 355 | 			    1, max); | 
 | 356 | static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, input); | 
 | 357 | static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 358 | 			    2, min); | 
 | 359 | static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 360 | 			    2, max); | 
 | 361 | static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, input); | 
 | 362 | static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 363 | 			    3, min); | 
 | 364 | static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 365 | 			    3, max); | 
 | 366 | static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, input); | 
 | 367 | static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 368 | 			    4, min); | 
 | 369 | static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 370 | 			    4, max); | 
 | 371 | static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, input); | 
 | 372 | static SENSOR_DEVICE_ATTR_2(temp6_min, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 373 | 			    5, min); | 
 | 374 | static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO | S_IWUSR, show_temp, set_temp, | 
 | 375 | 			    5, max); | 
 | 376 |  | 
 | 377 | static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, input); | 
 | 378 | static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan, | 
 | 379 | 			    0, min); | 
 | 380 | static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, input); | 
 | 381 | static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan, | 
 | 382 | 			    1, min); | 
 | 383 | static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, input); | 
 | 384 | static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan, | 
 | 385 | 			    2, min); | 
 | 386 | static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, input); | 
 | 387 | static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan, | 
 | 388 | 			    3, min); | 
 | 389 | static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, input); | 
 | 390 | static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan, | 
 | 391 | 			    4, min); | 
 | 392 |  | 
 | 393 | static struct attribute *emc6w201_attrs[] = { | 
 | 394 | 	&sensor_dev_attr_in0_input.dev_attr.attr, | 
 | 395 | 	&sensor_dev_attr_in0_min.dev_attr.attr, | 
 | 396 | 	&sensor_dev_attr_in0_max.dev_attr.attr, | 
 | 397 | 	&sensor_dev_attr_in1_input.dev_attr.attr, | 
 | 398 | 	&sensor_dev_attr_in1_min.dev_attr.attr, | 
 | 399 | 	&sensor_dev_attr_in1_max.dev_attr.attr, | 
 | 400 | 	&sensor_dev_attr_in2_input.dev_attr.attr, | 
 | 401 | 	&sensor_dev_attr_in2_min.dev_attr.attr, | 
 | 402 | 	&sensor_dev_attr_in2_max.dev_attr.attr, | 
 | 403 | 	&sensor_dev_attr_in3_input.dev_attr.attr, | 
 | 404 | 	&sensor_dev_attr_in3_min.dev_attr.attr, | 
 | 405 | 	&sensor_dev_attr_in3_max.dev_attr.attr, | 
 | 406 | 	&sensor_dev_attr_in4_input.dev_attr.attr, | 
 | 407 | 	&sensor_dev_attr_in4_min.dev_attr.attr, | 
 | 408 | 	&sensor_dev_attr_in4_max.dev_attr.attr, | 
 | 409 | 	&sensor_dev_attr_in5_input.dev_attr.attr, | 
 | 410 | 	&sensor_dev_attr_in5_min.dev_attr.attr, | 
 | 411 | 	&sensor_dev_attr_in5_max.dev_attr.attr, | 
 | 412 |  | 
 | 413 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 414 | 	&sensor_dev_attr_temp1_min.dev_attr.attr, | 
 | 415 | 	&sensor_dev_attr_temp1_max.dev_attr.attr, | 
 | 416 | 	&sensor_dev_attr_temp2_input.dev_attr.attr, | 
 | 417 | 	&sensor_dev_attr_temp2_min.dev_attr.attr, | 
 | 418 | 	&sensor_dev_attr_temp2_max.dev_attr.attr, | 
 | 419 | 	&sensor_dev_attr_temp3_input.dev_attr.attr, | 
 | 420 | 	&sensor_dev_attr_temp3_min.dev_attr.attr, | 
 | 421 | 	&sensor_dev_attr_temp3_max.dev_attr.attr, | 
 | 422 | 	&sensor_dev_attr_temp4_input.dev_attr.attr, | 
 | 423 | 	&sensor_dev_attr_temp4_min.dev_attr.attr, | 
 | 424 | 	&sensor_dev_attr_temp4_max.dev_attr.attr, | 
 | 425 | 	&sensor_dev_attr_temp5_input.dev_attr.attr, | 
 | 426 | 	&sensor_dev_attr_temp5_min.dev_attr.attr, | 
 | 427 | 	&sensor_dev_attr_temp5_max.dev_attr.attr, | 
 | 428 | 	&sensor_dev_attr_temp6_input.dev_attr.attr, | 
 | 429 | 	&sensor_dev_attr_temp6_min.dev_attr.attr, | 
 | 430 | 	&sensor_dev_attr_temp6_max.dev_attr.attr, | 
 | 431 |  | 
 | 432 | 	&sensor_dev_attr_fan1_input.dev_attr.attr, | 
 | 433 | 	&sensor_dev_attr_fan1_min.dev_attr.attr, | 
 | 434 | 	&sensor_dev_attr_fan2_input.dev_attr.attr, | 
 | 435 | 	&sensor_dev_attr_fan2_min.dev_attr.attr, | 
 | 436 | 	&sensor_dev_attr_fan3_input.dev_attr.attr, | 
 | 437 | 	&sensor_dev_attr_fan3_min.dev_attr.attr, | 
 | 438 | 	&sensor_dev_attr_fan4_input.dev_attr.attr, | 
 | 439 | 	&sensor_dev_attr_fan4_min.dev_attr.attr, | 
 | 440 | 	&sensor_dev_attr_fan5_input.dev_attr.attr, | 
 | 441 | 	&sensor_dev_attr_fan5_min.dev_attr.attr, | 
 | 442 | 	NULL | 
 | 443 | }; | 
 | 444 |  | 
 | 445 | ATTRIBUTE_GROUPS(emc6w201); | 
 | 446 |  | 
 | 447 | /* | 
 | 448 |  * Driver interface | 
 | 449 |  */ | 
 | 450 |  | 
 | 451 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | 452 | static int emc6w201_detect(struct i2c_client *client, | 
 | 453 | 			   struct i2c_board_info *info) | 
 | 454 | { | 
 | 455 | 	struct i2c_adapter *adapter = client->adapter; | 
 | 456 | 	int company, verstep, config; | 
 | 457 |  | 
 | 458 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
 | 459 | 		return -ENODEV; | 
 | 460 |  | 
 | 461 | 	/* Identification */ | 
 | 462 | 	company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY); | 
 | 463 | 	if (company != 0x5C) | 
 | 464 | 		return -ENODEV; | 
 | 465 | 	verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP); | 
 | 466 | 	if (verstep < 0 || (verstep & 0xF0) != 0xB0) | 
 | 467 | 		return -ENODEV; | 
 | 468 | 	if ((verstep & 0x0F) > 2) { | 
 | 469 | 		dev_dbg(&client->dev, "Unknown EMC6W201 stepping %d\n", | 
 | 470 | 			verstep & 0x0F); | 
 | 471 | 		return -ENODEV; | 
 | 472 | 	} | 
 | 473 |  | 
 | 474 | 	/* Check configuration */ | 
 | 475 | 	config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); | 
 | 476 | 	if (config < 0 || (config & 0xF4) != 0x04) | 
 | 477 | 		return -ENODEV; | 
 | 478 | 	if (!(config & 0x01)) { | 
 | 479 | 		dev_err(&client->dev, "Monitoring not enabled\n"); | 
 | 480 | 		return -ENODEV; | 
 | 481 | 	} | 
 | 482 |  | 
 | 483 | 	strlcpy(info->type, "emc6w201", I2C_NAME_SIZE); | 
 | 484 |  | 
 | 485 | 	return 0; | 
 | 486 | } | 
 | 487 |  | 
 | 488 | static int emc6w201_probe(struct i2c_client *client, | 
 | 489 | 			  const struct i2c_device_id *id) | 
 | 490 | { | 
 | 491 | 	struct device *dev = &client->dev; | 
 | 492 | 	struct emc6w201_data *data; | 
 | 493 | 	struct device *hwmon_dev; | 
 | 494 |  | 
 | 495 | 	data = devm_kzalloc(dev, sizeof(struct emc6w201_data), GFP_KERNEL); | 
 | 496 | 	if (!data) | 
 | 497 | 		return -ENOMEM; | 
 | 498 |  | 
 | 499 | 	data->client = client; | 
 | 500 | 	mutex_init(&data->update_lock); | 
 | 501 |  | 
 | 502 | 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, | 
 | 503 | 							   data, | 
 | 504 | 							   emc6w201_groups); | 
 | 505 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | 506 | } | 
 | 507 |  | 
 | 508 | static const struct i2c_device_id emc6w201_id[] = { | 
 | 509 | 	{ "emc6w201", 0 }, | 
 | 510 | 	{ } | 
 | 511 | }; | 
 | 512 | MODULE_DEVICE_TABLE(i2c, emc6w201_id); | 
 | 513 |  | 
 | 514 | static struct i2c_driver emc6w201_driver = { | 
 | 515 | 	.class		= I2C_CLASS_HWMON, | 
 | 516 | 	.driver = { | 
 | 517 | 		.name	= "emc6w201", | 
 | 518 | 	}, | 
 | 519 | 	.probe		= emc6w201_probe, | 
 | 520 | 	.id_table	= emc6w201_id, | 
 | 521 | 	.detect		= emc6w201_detect, | 
 | 522 | 	.address_list	= normal_i2c, | 
 | 523 | }; | 
 | 524 |  | 
 | 525 | module_i2c_driver(emc6w201_driver); | 
 | 526 |  | 
 | 527 | MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); | 
 | 528 | MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver"); | 
 | 529 | MODULE_LICENSE("GPL"); |